Handbook of Polymer Processing Additives
The handbook and the databook series include separate books on many commonly used additives, such as Antiblocking Agents, Antioxidants, Biocides, Flame Retardants, Nucleating Agents, Plasticizers, Solvents, UV Stabilizers, and many others. This Handbook contains a selection of minor additives used in the processing of polymeric and other materials, such as acid scavengers, air release, anticaking, antifoaming, antifreezing, antigassing, antigelling, defoaming, antisettling additives, hydrolysis stabilizers, moisture scavengers, and reprocessing aids. They are all very important additives, although less documented in the literature.
Information on the use of these additives in various products is divided into the following sections: Methods and mechanisms of additives use, Types and concentrations, Application data that emphasize reasons for their use, advantages and disadvantages of additive use, effect on product properties, and properties of final products.
The above-listed additives are most frequently used in PVC resins, including rigid, flexible, and paste resin, PVC copolymers, other vinyl resins, and mixtures with other polymers, polyolefins (PE and PP), and their copolymers (e.g., EVA, EPDM), polystyrene and various styrene copolymers, epichlorohydrin rubber, fluoroelastomers, fluorinated rubbers, and fluoropolymers, polyesters (PBT, PET, PLA, PBAT, unsaturated polyesters, and TPE), polyamides, polyurethanes, acrylates, and their various copolymers, alkyds, polyoxymethylene, epoxy, melamine, and phenolic resins, cellulosic polymers (e.g., nitrocellulose, cellulose acetate butyrate), rubbers (butyl, chlorinated rubber, styrene-butadiene, chlorobutyl, chlorosulfonated polyethylene, nitrile, silicone, and polychloroprene), starch-based resins, and many others not mentioned by name.
Many products and industries require these additives, including construction, automotive, aeronautic, electronic industries, glass coating, insulating glass manufacture, mineral wool insulation, adhesives, sealants and gaskets, cable and wire industry, paints, primers, and coatings, wind turbines, 3D printing, shoe industry, pneumatic pipe, film, conveyor belts, elevator wheel, home appliances, building decorative boards, shopping bags, agricultural film, food containers, toys and stationery, membranes, leather and coated fabrics, roof coatings, asphaltic felt, modified bitumen and single plies, printing with gravure and flexo on paper and vinyl wall coverings, foams, cast parts, cleaners, printing inks and toners, agrochemicals, cosmetics, and many others not mentioned by name.
The above (incomplete) list of polymers and products, which use discussed in this book additives, shows how important they are for polymer processing and the production of many other products.
A complete analysis of literature and patents is included in this book. The book considers all essential aspects of chemistry, physical properties, influence on properties of final products, formulations, methods of incorporation, analysis, and effects on health and the environment.
Handbook of Polymer Processing Additives is a highly practical resource, covering the use and application of many processing additives. It assists engineers and scientists in the polymer industry in their applications and provides a reference book for those involved in research and development support.
This book is an excellent companion to the Databook of Polymer Processing Additives because the data in the Handbook of Polymer Processing Additives do not repeat information, but Handbook gives a broader background for the selection of the additives, their performance mechanisms, and many essential application properties.
The combination of data and comprehensive analysis of the performance of these materials form a particularly important source of information for industry, research, academia, and legislature. These two books should be considered by any industrial, university, governmental, and public library because of the widespread applications of these additives in industry and everyday life.
Information on the use of these additives in various products is divided into the following sections: Methods and mechanisms of additives use, Types and concentrations, Application data that emphasize reasons for their use, advantages and disadvantages of additive use, effect on product properties, and properties of final products.
The above-listed additives are most frequently used in PVC resins, including rigid, flexible, and paste resin, PVC copolymers, other vinyl resins, and mixtures with other polymers, polyolefins (PE and PP), and their copolymers (e.g., EVA, EPDM), polystyrene and various styrene copolymers, epichlorohydrin rubber, fluoroelastomers, fluorinated rubbers, and fluoropolymers, polyesters (PBT, PET, PLA, PBAT, unsaturated polyesters, and TPE), polyamides, polyurethanes, acrylates, and their various copolymers, alkyds, polyoxymethylene, epoxy, melamine, and phenolic resins, cellulosic polymers (e.g., nitrocellulose, cellulose acetate butyrate), rubbers (butyl, chlorinated rubber, styrene-butadiene, chlorobutyl, chlorosulfonated polyethylene, nitrile, silicone, and polychloroprene), starch-based resins, and many others not mentioned by name.
Many products and industries require these additives, including construction, automotive, aeronautic, electronic industries, glass coating, insulating glass manufacture, mineral wool insulation, adhesives, sealants and gaskets, cable and wire industry, paints, primers, and coatings, wind turbines, 3D printing, shoe industry, pneumatic pipe, film, conveyor belts, elevator wheel, home appliances, building decorative boards, shopping bags, agricultural film, food containers, toys and stationery, membranes, leather and coated fabrics, roof coatings, asphaltic felt, modified bitumen and single plies, printing with gravure and flexo on paper and vinyl wall coverings, foams, cast parts, cleaners, printing inks and toners, agrochemicals, cosmetics, and many others not mentioned by name.
The above (incomplete) list of polymers and products, which use discussed in this book additives, shows how important they are for polymer processing and the production of many other products.
A complete analysis of literature and patents is included in this book. The book considers all essential aspects of chemistry, physical properties, influence on properties of final products, formulations, methods of incorporation, analysis, and effects on health and the environment.
Handbook of Polymer Processing Additives is a highly practical resource, covering the use and application of many processing additives. It assists engineers and scientists in the polymer industry in their applications and provides a reference book for those involved in research and development support.
This book is an excellent companion to the Databook of Polymer Processing Additives because the data in the Handbook of Polymer Processing Additives do not repeat information, but Handbook gives a broader background for the selection of the additives, their performance mechanisms, and many essential application properties.
The combination of data and comprehensive analysis of the performance of these materials form a particularly important source of information for industry, research, academia, and legislature. These two books should be considered by any industrial, university, governmental, and public library because of the widespread applications of these additives in industry and everyday life.
Related Products
Databook of Blowing an...
$315.00
{"id":7336328069277,"title":"Databook of Blowing and Auxiliary Agents, 2nd Ed.","handle":"databook-of-blowing-and-auxiliary-agents-2nd-ed","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGeorge Wypych\u003cbr\u003e\u003c\/span\u003eISBN 978-1-927885-87-1\u003cbr\u003e\u003cspan\u003ePages 460+12\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThis book is a must-have for manufacturers of blowing agents, manufacturers of products containing blowing agents designed for various purposes, regulating bodies, academia, and research laboratories. The databook contains information, which is complete, timely, up-to-date, and useful in numerous fields of application and for thousands of manufactures and products.\u003cbr\u003e\u003cbr\u003eThe Databook of Blowing and Auxiliary Agents is more useful in combination with the Handbook of Foaming and Blowing Agents. Both books do not overlap but complement each other.\u003cbr\u003e\u003cbr\u003eThe information on over 360 blow molding and auxiliary agents is presented in individual tables for each product (either commercial or generic). The data are divided into 5 groups, including General Information, Physical Properties, Health \u0026amp; Safety, Ecological Properties, and Use \u0026amp; Performance. The following information is included in each Section if available in the source(s) of data.\u003cbr\u003e\u003cbr\u003eGeneral Information: name, CAS #, EC #, IUPAC name, common name, common synonyms, acronym, empirical formula, chemical structure, molecular mass, RTECS number, chemical category, product class, product composition, masterbatch, blends, moisture content, solids content.\u003cbr\u003e\u003cbr\u003ePhysical Properties: state, odor, color, platinum-cobalt scale, bulk density, density, specific gravity, pKa, boiling point, melting point, pour point, decomposition temperature, maximum gas yield, total gas yield, TMA, blowing gas content, foam K factor, glass transition temperature, main gas, iodine value, aniline point, refractive index, vapor pressure, vapor density, vapor thermal conductivity, volume resistivity, relative permittivity, ash content, pH, viscosity, absolute viscosity, surface tension, solubility in solvents, solubility in water, the heat of vaporization, the heat of combustion, the heat of decomposition, specific heat, thermal conductivity, Henry’s law constant, particle size, and volatility.\u003cbr\u003e\u003cbr\u003eHealth \u0026amp; Safety: NFPA classification, HMIS classification, OSHA hazard class, UN Risk phrases, UN Safety phrases, UN\/NA class, DOT class, ADR\/RIC class, ICAO\/IATA class, IMDG class, packaging group, shipping name, food approvals, autoignition temperature, self-accelerating decomposition temperature, flash point, TLV ACGIH, NIOSH and OSHA, maximum exposure concentration IDLH, animal testing oral-rat, rabbit-dermal, mouse-oral, guinea pig-dermal, rat-dermal, rat-inhalation, mouse-inhalation, ingestion, skin irritation, eye irritation, inhalation, first aid eye, skin, and inhalation, carcinogenicity IARC, NTP, OSHA, ACGIH, and mutagenicity.\u003cbr\u003e\u003cbr\u003eEcological Properties: atmospheric lifetime, biological oxygen demand, chemical oxygen demand, theoretical oxygen demand, biodegradation probability, aquatic toxicity algae, Rainbow trout, Sheepshead minnow, Fathead minnow, and Daphnia magna, global warming potential, ozone depletion potential, VOC, Kyoto compliant, and partition coefficient.\u003cbr\u003e\u003cbr\u003eUse \u0026amp; Performance: manufacturer, product feature, recommended for polymers, recommended for products, outstanding properties, a typical reason for use, processing methods, not recommended for, the concentration used, food approval, and R-value.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nActivators\u003cbr data-mce-fragment=\"1\"\u003eAzodicarbonamides\u003cbr data-mce-fragment=\"1\"\u003eCrosslinkers\u003cbr data-mce-fragment=\"1\"\u003eDinitroso pentamethylene tetramines\u003cbr data-mce-fragment=\"1\"\u003eDispersions in polymer carriers\u003cbr data-mce-fragment=\"1\"\u003eFoaming agent mixtures with other additive(s)\u003cbr data-mce-fragment=\"1\"\u003eGases\u003cbr data-mce-fragment=\"1\"\u003eHydrazides\u003cbr data-mce-fragment=\"1\"\u003eHydrocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrochlorocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrochlorofluorocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrofluorocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrofluoroolefins\u003cbr data-mce-fragment=\"1\"\u003eMasterbatches\u003cbr data-mce-fragment=\"1\"\u003eMicrospheres\u003cbr data-mce-fragment=\"1\"\u003eMixtures of foaming agents\u003cbr data-mce-fragment=\"1\"\u003eNucleating agents\u003cbr data-mce-fragment=\"1\"\u003eProprietary\u003cbr data-mce-fragment=\"1\"\u003eSalts of carbonic and polycarbonic acids\u003cbr data-mce-fragment=\"1\"\u003eSodium bicarbonate\u003cbr data-mce-fragment=\"1\"\u003eSulfonylsemicarbazides\u003cbr data-mce-fragment=\"1\"\u003eTetrazoles\u003cbr data-mce-fragment=\"1\"\u003eWater\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e","published_at":"2022-03-31T20:26:05-04:00","created_at":"2022-03-31T20:19:42-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2022","Antiblocking agents","blow molding","blowing","blowing agents","book","foams","new"],"price":31500,"price_min":31500,"price_max":31500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42165614772381,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Databook of Blowing and Auxiliary Agents, 2nd Ed.","public_title":null,"options":["Default Title"],"price":31500,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-927885-87-1","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885871-Case.png?v=1648772646"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885871-Case.png?v=1648772646","options":["Title"],"media":[{"alt":null,"id":24734249975965,"position":1,"preview_image":{"aspect_ratio":0.658,"height":450,"width":296,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885871-Case.png?v=1648772646"},"aspect_ratio":0.658,"height":450,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885871-Case.png?v=1648772646","width":296}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGeorge Wypych\u003cbr\u003e\u003c\/span\u003eISBN 978-1-927885-87-1\u003cbr\u003e\u003cspan\u003ePages 460+12\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThis book is a must-have for manufacturers of blowing agents, manufacturers of products containing blowing agents designed for various purposes, regulating bodies, academia, and research laboratories. The databook contains information, which is complete, timely, up-to-date, and useful in numerous fields of application and for thousands of manufactures and products.\u003cbr\u003e\u003cbr\u003eThe Databook of Blowing and Auxiliary Agents is more useful in combination with the Handbook of Foaming and Blowing Agents. Both books do not overlap but complement each other.\u003cbr\u003e\u003cbr\u003eThe information on over 360 blow molding and auxiliary agents is presented in individual tables for each product (either commercial or generic). The data are divided into 5 groups, including General Information, Physical Properties, Health \u0026amp; Safety, Ecological Properties, and Use \u0026amp; Performance. The following information is included in each Section if available in the source(s) of data.\u003cbr\u003e\u003cbr\u003eGeneral Information: name, CAS #, EC #, IUPAC name, common name, common synonyms, acronym, empirical formula, chemical structure, molecular mass, RTECS number, chemical category, product class, product composition, masterbatch, blends, moisture content, solids content.\u003cbr\u003e\u003cbr\u003ePhysical Properties: state, odor, color, platinum-cobalt scale, bulk density, density, specific gravity, pKa, boiling point, melting point, pour point, decomposition temperature, maximum gas yield, total gas yield, TMA, blowing gas content, foam K factor, glass transition temperature, main gas, iodine value, aniline point, refractive index, vapor pressure, vapor density, vapor thermal conductivity, volume resistivity, relative permittivity, ash content, pH, viscosity, absolute viscosity, surface tension, solubility in solvents, solubility in water, the heat of vaporization, the heat of combustion, the heat of decomposition, specific heat, thermal conductivity, Henry’s law constant, particle size, and volatility.\u003cbr\u003e\u003cbr\u003eHealth \u0026amp; Safety: NFPA classification, HMIS classification, OSHA hazard class, UN Risk phrases, UN Safety phrases, UN\/NA class, DOT class, ADR\/RIC class, ICAO\/IATA class, IMDG class, packaging group, shipping name, food approvals, autoignition temperature, self-accelerating decomposition temperature, flash point, TLV ACGIH, NIOSH and OSHA, maximum exposure concentration IDLH, animal testing oral-rat, rabbit-dermal, mouse-oral, guinea pig-dermal, rat-dermal, rat-inhalation, mouse-inhalation, ingestion, skin irritation, eye irritation, inhalation, first aid eye, skin, and inhalation, carcinogenicity IARC, NTP, OSHA, ACGIH, and mutagenicity.\u003cbr\u003e\u003cbr\u003eEcological Properties: atmospheric lifetime, biological oxygen demand, chemical oxygen demand, theoretical oxygen demand, biodegradation probability, aquatic toxicity algae, Rainbow trout, Sheepshead minnow, Fathead minnow, and Daphnia magna, global warming potential, ozone depletion potential, VOC, Kyoto compliant, and partition coefficient.\u003cbr\u003e\u003cbr\u003eUse \u0026amp; Performance: manufacturer, product feature, recommended for polymers, recommended for products, outstanding properties, a typical reason for use, processing methods, not recommended for, the concentration used, food approval, and R-value.\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nActivators\u003cbr data-mce-fragment=\"1\"\u003eAzodicarbonamides\u003cbr data-mce-fragment=\"1\"\u003eCrosslinkers\u003cbr data-mce-fragment=\"1\"\u003eDinitroso pentamethylene tetramines\u003cbr data-mce-fragment=\"1\"\u003eDispersions in polymer carriers\u003cbr data-mce-fragment=\"1\"\u003eFoaming agent mixtures with other additive(s)\u003cbr data-mce-fragment=\"1\"\u003eGases\u003cbr data-mce-fragment=\"1\"\u003eHydrazides\u003cbr data-mce-fragment=\"1\"\u003eHydrocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrochlorocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrochlorofluorocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrofluorocarbons\u003cbr data-mce-fragment=\"1\"\u003eHydrofluoroolefins\u003cbr data-mce-fragment=\"1\"\u003eMasterbatches\u003cbr data-mce-fragment=\"1\"\u003eMicrospheres\u003cbr data-mce-fragment=\"1\"\u003eMixtures of foaming agents\u003cbr data-mce-fragment=\"1\"\u003eNucleating agents\u003cbr data-mce-fragment=\"1\"\u003eProprietary\u003cbr data-mce-fragment=\"1\"\u003eSalts of carbonic and polycarbonic acids\u003cbr data-mce-fragment=\"1\"\u003eSodium bicarbonate\u003cbr data-mce-fragment=\"1\"\u003eSulfonylsemicarbazides\u003cbr data-mce-fragment=\"1\"\u003eTetrazoles\u003cbr data-mce-fragment=\"1\"\u003eWater\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e"}
Databook of Impact Mod...
$285.00
{"id":7336342716573,"title":"Databook of Impact Modifiers","handle":"databook-of-impact-modifiers","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eGeorge Wypych\u003cbr\u003e\u003c\/span\u003eISBN 978-1-927885-89-5\u003cbr\u003e\u003cspan\u003ePages 460+12\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThis book is a must-have for manufacturers of impact modifiers, manufacturers of products containing impact modifiers, regulating bodies, academia, and research laboratories. The databook contains information, which is complete, timely, up-to-date, and useful in numerous fields of application and for thousands of manufacturers and products.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImpact modifiers are particularly recommended to improve mechanical and other properties, such as tensile, impact, flexural, stress whitening, stiffness, toughness, fracture behavior, etc., but they also influence adhesion, biodegradability, flammability, optical properties, thermal stability, and other properties of high-performance thermoplastic, polymer blends, and thermoset formulations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eDatabook of Impact Modifiers\u003c\/strong\u003e is more useful in combination with the \u003cstrong\u003eHandbook of Impact Modifiers\u003c\/strong\u003e. Both books do not overlap but complement each other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe information on over 300 impact modifiers is presented in individual tables for each product (either commercial or generic). The data are divided into 5 groups, including General Information, Physical Properties, Health \u0026amp; Safety, Ecological Properties, and Use \u0026amp; Performance. The following information is included in each Section if available in the source(s) of data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGeneral Information\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Name, CAS #, EC #, Acronym, Antioxidant content, Biobased content, Butyl acrylate, Chemical category, Chemical\/polymer name, Chlorine content, Common name, Common synonym, Composition, Core-Shell (CSR) dispersed type, CSR particle size, Diblock content, Empirical formula, EPA code, Epoxide equivalent weight, Ethylene content, Grafting degree, HSBC type, IUPAC name, Methyl acrylate, Molecular mass, Masterbatch, Mixture, Moisture content, Polymer structure, Polystyrene content, Product contents, Purity, RTECS number, Solvent system\/content, Styrene\/rubber ratio, and Total extractables.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePhysical Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: State, Odor, Color, Abrasion resistance, Acid #, Boiling point, Brittleness temperature, Bulk density, Cloud point, Coefficient of thermal expansion, Crystallinity, Crystallization temperature peak, Decomposition temperature, Density, Drying loss, Elongation at break, Flexural modulus, Flexural strength, Flexural stress at break, Flexural stress at yield, Gardner impact, Glass transition temperature, Gloss, Graves tear, Hardness Rockwell, Hardness Shore A, Hardness Shore D, Haze, Heat distortion temperature, Heat of combustion, Impact strength dart drop, Izod impact, Loss on ignition, MAH content, Melt flow rate, Melt viscosity, Melting\/freezing point, Modulus 300%, Moisture absorption, Oxygen index LOI, Particle size, Particle size distribution, Pellets per gram, Permeability coefficient, pH, Refractive index, Relative permittivity, Ring and ball softening point, Set at break, Solubility in water and solvents, Specific gravity, Specific heat, Specific surface area, Spencer impact, Stiffness, Stress at yield, Surface hardness, Surface tension, Tear strength, Tensile elongation ultimate, Tensile impact strength, Tensile modulus, Tensile strain, Tensile strength, Thermal conductivity, Transmission visible, Vapor density, Vapor pressure, Vicat softening point, Viscosity, Viscosity index, Viscosity Mooney, Volatility, Volume resistivity, and Water vapor transmission rate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHealth \u0026amp; Safety\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Autoignition temperature, Carcinogenicity, Dust explosion class, Eye irritation, Flash point, Flash point method, Flame characteristics, NFPA Health, NFPA Flammability, NFPA Reactivity, HMIS Health, HMIS Fire, HMIS Reactivity, HMIS Personal protection, Hazards, ICAO\/IATA Class, IMDG Class, Mutagenicity, Rat oral LD\u003csub\u003e50\u003c\/sub\u003e, Rabbit dermal LD\u003csub\u003e50\u003c\/sub\u003e, Inhalation rat LC\u003csub\u003e50\u003c\/sub\u003e, Skin irritation, and TLV - TWA 8h (ACGIH and OSHA)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eEcological Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Aquatic toxicity LC50 (Algae, Bluegill sunfish, Daphnia magna, Rainbow trout), Biodegradation probability, and Partition coefficient (log K\u003csub\u003eoc\u003c\/sub\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eUse \u0026amp; Performance\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Manufacturer, Outstanding properties, General characteristics, Recommended for polymers, Recommended for products, Related end-markets Related functions, Processing methods, Concentrations used, Guideline for use, Process temperature, and Food contact.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-03-31T20:34:20-04:00","created_at":"2022-03-31T20:26:27-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2022","book","foams","modifiers","new"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42165647933597,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Databook of Impact Modifiers","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-927885-89-5","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885895-Case.png?v=1648773220"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885895-Case.png?v=1648773220","options":["Title"],"media":[{"alt":null,"id":24734341464221,"position":1,"preview_image":{"aspect_ratio":0.658,"height":450,"width":296,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885895-Case.png?v=1648773220"},"aspect_ratio":0.658,"height":450,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885895-Case.png?v=1648773220","width":296}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eGeorge Wypych\u003cbr\u003e\u003c\/span\u003eISBN 978-1-927885-89-5\u003cbr\u003e\u003cspan\u003ePages 460+12\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThis book is a must-have for manufacturers of impact modifiers, manufacturers of products containing impact modifiers, regulating bodies, academia, and research laboratories. The databook contains information, which is complete, timely, up-to-date, and useful in numerous fields of application and for thousands of manufacturers and products.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImpact modifiers are particularly recommended to improve mechanical and other properties, such as tensile, impact, flexural, stress whitening, stiffness, toughness, fracture behavior, etc., but they also influence adhesion, biodegradability, flammability, optical properties, thermal stability, and other properties of high-performance thermoplastic, polymer blends, and thermoset formulations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eDatabook of Impact Modifiers\u003c\/strong\u003e is more useful in combination with the \u003cstrong\u003eHandbook of Impact Modifiers\u003c\/strong\u003e. Both books do not overlap but complement each other.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe information on over 300 impact modifiers is presented in individual tables for each product (either commercial or generic). The data are divided into 5 groups, including General Information, Physical Properties, Health \u0026amp; Safety, Ecological Properties, and Use \u0026amp; Performance. The following information is included in each Section if available in the source(s) of data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGeneral Information\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Name, CAS #, EC #, Acronym, Antioxidant content, Biobased content, Butyl acrylate, Chemical category, Chemical\/polymer name, Chlorine content, Common name, Common synonym, Composition, Core-Shell (CSR) dispersed type, CSR particle size, Diblock content, Empirical formula, EPA code, Epoxide equivalent weight, Ethylene content, Grafting degree, HSBC type, IUPAC name, Methyl acrylate, Molecular mass, Masterbatch, Mixture, Moisture content, Polymer structure, Polystyrene content, Product contents, Purity, RTECS number, Solvent system\/content, Styrene\/rubber ratio, and Total extractables.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePhysical Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: State, Odor, Color, Abrasion resistance, Acid #, Boiling point, Brittleness temperature, Bulk density, Cloud point, Coefficient of thermal expansion, Crystallinity, Crystallization temperature peak, Decomposition temperature, Density, Drying loss, Elongation at break, Flexural modulus, Flexural strength, Flexural stress at break, Flexural stress at yield, Gardner impact, Glass transition temperature, Gloss, Graves tear, Hardness Rockwell, Hardness Shore A, Hardness Shore D, Haze, Heat distortion temperature, Heat of combustion, Impact strength dart drop, Izod impact, Loss on ignition, MAH content, Melt flow rate, Melt viscosity, Melting\/freezing point, Modulus 300%, Moisture absorption, Oxygen index LOI, Particle size, Particle size distribution, Pellets per gram, Permeability coefficient, pH, Refractive index, Relative permittivity, Ring and ball softening point, Set at break, Solubility in water and solvents, Specific gravity, Specific heat, Specific surface area, Spencer impact, Stiffness, Stress at yield, Surface hardness, Surface tension, Tear strength, Tensile elongation ultimate, Tensile impact strength, Tensile modulus, Tensile strain, Tensile strength, Thermal conductivity, Transmission visible, Vapor density, Vapor pressure, Vicat softening point, Viscosity, Viscosity index, Viscosity Mooney, Volatility, Volume resistivity, and Water vapor transmission rate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHealth \u0026amp; Safety\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Autoignition temperature, Carcinogenicity, Dust explosion class, Eye irritation, Flash point, Flash point method, Flame characteristics, NFPA Health, NFPA Flammability, NFPA Reactivity, HMIS Health, HMIS Fire, HMIS Reactivity, HMIS Personal protection, Hazards, ICAO\/IATA Class, IMDG Class, Mutagenicity, Rat oral LD\u003csub\u003e50\u003c\/sub\u003e, Rabbit dermal LD\u003csub\u003e50\u003c\/sub\u003e, Inhalation rat LC\u003csub\u003e50\u003c\/sub\u003e, Skin irritation, and TLV - TWA 8h (ACGIH and OSHA)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eEcological Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Aquatic toxicity LC50 (Algae, Bluegill sunfish, Daphnia magna, Rainbow trout), Biodegradation probability, and Partition coefficient (log K\u003csub\u003eoc\u003c\/sub\u003e).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eUse \u0026amp; Performance\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: Manufacturer, Outstanding properties, General characteristics, Recommended for polymers, Recommended for products, Related end-markets Related functions, Processing methods, Concentrations used, Guideline for use, Process temperature, and Food contact.\u003c\/span\u003e\u003c\/p\u003e"}
Databook of Rheologica...
$285.00
{"id":7336361459869,"title":"Databook of Rheological Additives","handle":"databook-of-rheological-additives","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eAnna Wypych \u0026amp; George Wypych\u003cbr\u003e\u003c\/span\u003eISBN 978-1-927885-91-8 \u003cbr\u003ePages 588+xii\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eRheological additives are of interest to many industries, including paints, coatings, cosmetics, mortars, cementitious products, various polymer processing methods, sealants, inks, greases, drilling, packaging, and food products, to name some of the most important. Their selection and applications change and require frequent updates. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eDatabook of Rheological Additives\u003c\/strong\u003e is frequently used in combination with the \u003cstrong\u003eHandbook of Rheological Additives\u003c\/strong\u003e. Both books do not overlap but complement each other, providing together comprehensive information on rheological additives.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe information on over 330 organic and inorganic additives is presented in individual tables for each product (either commercial or generic). There are over 30 chemical groups of additives included in this review. The data are divided into 5 groups, including General Information, Physical Properties, Health \u0026amp; Safety, Ecological Properties, and Use \u0026amp; Performance. The following information is included in each Section if available in the source(s) of data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGeneral Information\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: name, CAS #, EC #, IUPAC name, common name, common synonyms, acronym, biobased, cellulose functionality, charge, degree of substitution, empirical formula, chemical structure, molecular mass, RTECS number, chemical category, product class, product composition, moisture content, and solids content.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePhysical Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: state, odor, color, bulk density, density, specific gravity, relative density, boiling point, melting point, pour point, decomposition temperature, glass transition temperature, refractive index, vapor pressure, vapor density, volume resistivity, relative permittivity, ash content, pH, viscosity, rheological behavior, absolute viscosity, surface tension, hydration time, solubility in solvents, solubility in water, the heat of combustion, the heat of decomposition, specific heat, thermal conductivity, Henry’s law constant, particle size, and volatility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHealth \u0026amp; Safety\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: NFPA classification, HMIS classification, OSHA hazard class, UN Risk phrases, UN Safety phrases, UN\/NA class, DOT class, ADR\/RIC class, ICAO\/IATA class, IMDG class, packaging group, shipping name, food approvals, autoignition temperature, self-accelerating decomposition temperature, flash point, TLV ACGIH, NIOSH and OSHA, maximum exposure concentration IDLH, animal testing oral-rat, rabbit-dermal, mouse-oral, guinea pig-dermal, rat-dermal, rat-inhalation, mouse-inhalation, ingestion, skin irritation, eye irritation, inhalation, first aid eye, skin, and inhalation, carcinogenicity IARC, NTP, OSHA, ACGIH, and mutagenicity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eEcological Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: biological oxygen demand, chemical oxygen demand, theoretical oxygen demand, biodegradation probability, aquatic toxicity algae, \u003cem\u003eRainbow trout\u003c\/em\u003e, \u003cem\u003eSheepshead minnow\u003c\/em\u003e, \u003cem\u003eFathead minnow\u003c\/em\u003e, and \u003cem\u003eDaphnia magna\u003c\/em\u003e, and partition coefficient.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eUse \u0026amp; Performance\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: manufacturer, product feature, recommended for polymers, recommended for products, outstanding properties, compatibility, limitations, a typical reason for use, processing methods, the concentration used, storage temperature, and food approval.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2022-03-31T20:37:57-04:00","created_at":"2022-03-31T20:34:43-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2022","book","coating","foams","industrial paint","new","paint","painting","paints"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42165690204317,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Databook of Rheological Additives","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-927885-91-8","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885918-Case.png?v=1648773465"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885918-Case.png?v=1648773465","options":["Title"],"media":[{"alt":null,"id":24734374330525,"position":1,"preview_image":{"aspect_ratio":0.705,"height":420,"width":296,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885918-Case.png?v=1648773465"},"aspect_ratio":0.705,"height":420,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1555\/1853\/products\/9781927885918-Case.png?v=1648773465","width":296}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eAnna Wypych \u0026amp; George Wypych\u003cbr\u003e\u003c\/span\u003eISBN 978-1-927885-91-8 \u003cbr\u003ePages 588+xii\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eRheological additives are of interest to many industries, including paints, coatings, cosmetics, mortars, cementitious products, various polymer processing methods, sealants, inks, greases, drilling, packaging, and food products, to name some of the most important. Their selection and applications change and require frequent updates. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eDatabook of Rheological Additives\u003c\/strong\u003e is frequently used in combination with the \u003cstrong\u003eHandbook of Rheological Additives\u003c\/strong\u003e. Both books do not overlap but complement each other, providing together comprehensive information on rheological additives.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe information on over 330 organic and inorganic additives is presented in individual tables for each product (either commercial or generic). There are over 30 chemical groups of additives included in this review. The data are divided into 5 groups, including General Information, Physical Properties, Health \u0026amp; Safety, Ecological Properties, and Use \u0026amp; Performance. The following information is included in each Section if available in the source(s) of data.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eGeneral Information\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: name, CAS #, EC #, IUPAC name, common name, common synonyms, acronym, biobased, cellulose functionality, charge, degree of substitution, empirical formula, chemical structure, molecular mass, RTECS number, chemical category, product class, product composition, moisture content, and solids content.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePhysical Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: state, odor, color, bulk density, density, specific gravity, relative density, boiling point, melting point, pour point, decomposition temperature, glass transition temperature, refractive index, vapor pressure, vapor density, volume resistivity, relative permittivity, ash content, pH, viscosity, rheological behavior, absolute viscosity, surface tension, hydration time, solubility in solvents, solubility in water, the heat of combustion, the heat of decomposition, specific heat, thermal conductivity, Henry’s law constant, particle size, and volatility.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHealth \u0026amp; Safety\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: NFPA classification, HMIS classification, OSHA hazard class, UN Risk phrases, UN Safety phrases, UN\/NA class, DOT class, ADR\/RIC class, ICAO\/IATA class, IMDG class, packaging group, shipping name, food approvals, autoignition temperature, self-accelerating decomposition temperature, flash point, TLV ACGIH, NIOSH and OSHA, maximum exposure concentration IDLH, animal testing oral-rat, rabbit-dermal, mouse-oral, guinea pig-dermal, rat-dermal, rat-inhalation, mouse-inhalation, ingestion, skin irritation, eye irritation, inhalation, first aid eye, skin, and inhalation, carcinogenicity IARC, NTP, OSHA, ACGIH, and mutagenicity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eEcological Properties\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: biological oxygen demand, chemical oxygen demand, theoretical oxygen demand, biodegradation probability, aquatic toxicity algae, \u003cem\u003eRainbow trout\u003c\/em\u003e, \u003cem\u003eSheepshead minnow\u003c\/em\u003e, \u003cem\u003eFathead minnow\u003c\/em\u003e, and \u003cem\u003eDaphnia magna\u003c\/em\u003e, and partition coefficient.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eUse \u0026amp; Performance\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: manufacturer, product feature, recommended for polymers, recommended for products, outstanding properties, compatibility, limitations, a typical reason for use, processing methods, the concentration used, storage temperature, and food approval.\u003c\/span\u003e\u003c\/p\u003e"}