Compounding (Rubber)

Compounding Precipitat...

$330.00

{"id":11242225476,"title":"Compounding Precipitated Silica in Elastomers, Theory and Practice","handle":"978-0-8155-1528-9","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Norman Hewitt \u003cbr\u003eISBN 978-0-8155-1528-9 \u003cbr\u003e\u003cbr\u003ePages: 578 pp, Hardback\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis valuable guide to compounding elastomers with precipitated silica covers principles, properties, mixing, testing and formulations from a practical perspective. This handbook and reference manual will serve those who work on part design, elastomer formulation, manufacturing and applications of elastomers. Ample discussion of compound specifications adds to the usefulness of this book to practitioners. Comparisons of carbon black and silica compounds throughout the book allow readers to select the most suitable formulation for applications ranging from tires to electrical insulation to shoe soles. \u003cbr\u003e\u003cbr\u003eThe author has over forty years of experience in the rubber industry highlighted by his 39 years at the PPG Rubber Research laboratories. A highlight of the book is the inclusion of studies conducted by the author which greatly adds to the richness of the contents.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003e\u003cbr\u003eChapter 1: SILICA AS A REINFORCING FILLER\u003c\/b\u003e\u003cbr\u003e1.1 Introduction \u003cbr\u003e1.2 Manufacture of Precipitated Silica \u003cbr\u003e1.3 Silica and Carbon black \u003cbr\u003e1.4 Silica Surface Area \u003cbr\u003e1.5 Silica Free Water \u003cbr\u003e1.6 Silica Free Water, Affect on Visible Dispersion \u003cbr\u003e1.7 Silica Surface Silanol groups \u003cbr\u003e1.8 Silica pH \u003cbr\u003e1.9 Soluble Salts in Silica \u003cbr\u003e1.10 Physical Form and Sensity of Silica \u003cbr\u003e1.11 Other Silica Properties \u003cbr\u003e1.12 Silane Treated Silicas \u003cbr\u003e\u003cb\u003eChapter 2: COMPOUNDING PRECIPITATED SILICA IN NATURAL RUBBER\u003c\/b\u003e\u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Silica and Carbon Black \u003cbr\u003e2.3 Activation: Zinc Oxide \u003cbr\u003e2.4 Cure Activation: Glycols \u003cbr\u003e2.5 Acceleration with Secondary Accelerators in Normal Sulfur Systems \u003cbr\u003e2.6 Acceleration: Single Accelerators in Normal Sulfur Systems \u003cbr\u003e2.7 Acceleration: Single Accelerators; Vulcanizate Properties \u003cbr\u003e2.8 Acceleration: Low Sulfur\/Sulfur Donor Systems \u003cbr\u003e2.9 Reversion \u003cbr\u003e2.10 Antioxidant Systems: Non-staining \u003cbr\u003e2.11 Plasticization \u003cbr\u003e2.12 Tear Resistance \u003cbr\u003e2.13 Tear Resistance: Contour Curve Studies of Silica Content Effects \u003cbr\u003e2.14 Tear Resistance: Silica Primary Particle Size \u003cbr\u003e2.15 Tear Resistance; Non-Marking Solid tires \u003cbr\u003e2.16 Shelf Aged Stiffness and Green Strength \u003cbr\u003e2.17 Peroxide Cure \u003cbr\u003e2.18 Peroxide Curing: Silica Reinforcement and Structure \u003cbr\u003e2.19 Peroxide Curing: Silica Surface Area \u003cbr\u003e2.20 Peroxide Cure: Silane Coupling \u003cbr\u003e2.21 Silane Coupling: Sulfur Cure Systems \u003cbr\u003e2.22 Zinc-Free Cure Systems \u003cbr\u003e2.23 Zinc-Free Cure Systems: Polyisoprene (IR) \u003cbr\u003e2.24 Brass Adhesion \u003cbr\u003e2.25 Brass Adhesion Mechanism \u003cbr\u003e2.26 Adhesion to Textile Fabrics; the HRH system \u003cbr\u003e2.27 Fabric Adhesion: Dynamic testing \u003cbr\u003e2.28 Heat Resistance \u003cbr\u003eNatural Rubber Formulary \u003cbr\u003e\u003cb\u003eChapter 3: COMPOUNDING PRECIPITATED SILICA IN EMULSION SBR\u003c\/b\u003e\u003cbr\u003e3.1 Introduction \u003cbr\u003e3.2 Silica and Carbon Black \u003cbr\u003e3.3 Cure Systems: Activation with Glycols \u003cbr\u003e3.4 Cure System: Zinc Oxide Activation \u003cbr\u003e3.5 Cure System: Magnesium Oxide Activation \u003cbr\u003e3.6 Cure system: Lead oxide (Litharge) Activation \u003cbr\u003e3.7 Cure System: Stearic acid \u003cbr\u003e3.8 Cure Systems: Primary, Secondary Accelerators \u003cbr\u003e3.9 Cure Systems: Single Accelerators \u003cbr\u003e3.10 Cure Systems: Sulfur Concentration \u003cbr\u003e3.11 Plasticization \u003cbr\u003e3.12 Antioxidants \u003cbr\u003e3.13 Tear Resistance: Silica Primary Particle Size \u003cbr\u003e3.14 Tear Resistance: Silica Content \u003cbr\u003e3.15 Fabric Adhesion \u003cbr\u003e3.16 Heat Resistance \u003cbr\u003e3.17 Silane coupling \u003cbr\u003e3.18 Silane Coupling: Competition \u003cbr\u003eEmulsion SBR Formulary \u003cbr\u003e\u003cb\u003eChapter 4: COMPOUNDING SILICA IN ELASTOMERS SOLUTION SBR AND BR\u003c\/b\u003e\u003cbr\u003e4.1 Introduction \u003cbr\u003e4.2 Silica and Carbon Black \u003cbr\u003e4.3 Zinc-Free Cure Systems \u003cbr\u003e4.4 Zinc-Free Cure Systems: Accelerators \u0026amp; Sulfur \u003cbr\u003e4.5 Zinc-Free Cure Systems: Polymer Effects \u003cbr\u003e4.6 Zinc-Free Cure Systems: Zinc oxide and HMT \u003cbr\u003e4.7 Zinc-Free Cure Systems: Effects of Additives \u003cbr\u003e4.8 Zinc-Free Cure systems: Sulfur content \u003cbr\u003e4.9 Zinc-Free Cure System: Antioxidants \u003cbr\u003e4.10 Zinc-Free Cure Systems: Processing \u003cbr\u003e4.11 Zinc-Free Systems: Plasticizers \u003cbr\u003e4.12 Zinc-Free Systems: Additive plasticizers \u003cbr\u003e4.13 Silane Coupling: Pretreated Silica \u003cbr\u003e4.14 Silane Coupling \u003cbr\u003e4.15 Zinc-Free Cure Systems: Surface Area Effects \u003cbr\u003e4.16 Zinc-Free Cure Systems: Trouser Tear Strength \u003cbr\u003e4.17 Zinc-Free Cure Systems ; Silica Content \u003cbr\u003e4.18 Zinc-Free Cure Systems: Durometer Equivalents \u003cbr\u003eSolution SBR and BR Formulary \u003cbr\u003e\u003cb\u003eChapter 5: COMPOUNDING SILICA IN ELASTOMERS EPDM\u003c\/b\u003e\u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Silica and Carbon Black \u003cbr\u003e5.3 Acceleration Systems \u003cbr\u003e5.4 Low Sulfur Systems with Donors \u003cbr\u003e5.5 Activation: Oxides and Glycols \u003cbr\u003e5.6 Antioxidants: Heat Resistance \u003cbr\u003e5.7 Zinc-Free Cure Systems \u003cbr\u003e5.8 Silane Coupling \u003cbr\u003e5.9 Silica Surface Area \u003cbr\u003e5.10 Peroxide Cure Systems \u003cbr\u003e5.11 Processing \u003cbr\u003e5.12 Adhesion to Brass \u003cbr\u003e5.13 Fabric Adhesion \u003cbr\u003e5.14 Adhesion to Zinc (Galvanized) Coatings \u003cbr\u003e5.15 Compression Fatigue Life \u003cbr\u003eEPDM Formulary \u003cbr\u003e\u003cb\u003eChapter 6: COMPOUNDING PRECIPITATED SILICA IN NEOPRENE\u003c\/b\u003e\u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 NSM (Type W) Neoprene: Oxide Crosslinking \u003cbr\u003e6.3 NSM Neoprene (W): Organic Acceleration \u003cbr\u003e6.4 NSM Neoprene: Glycol Activation \u003cbr\u003e6.5 NSM Neoprene: Plasticization \u003cbr\u003e6.6 NSM Neoprene: Silica and Black \u003cbr\u003e6.7 Silica Surface Area \u003cbr\u003e6.8 NSM Neoprene: Silane Coupling \u003cbr\u003e6.9 NSM Neoprene: Fabric Adhesion \u003cbr\u003e6.10 NSM Neoprene: Brass Adhesion \u003cbr\u003e6.11 NSM Neoprene: Water Absorption \u003cbr\u003e6.12 Sulfur Modified (SM) Neoprene: Cure Systems \u003cbr\u003e6.13 SM Neoprene: Glycol Activation \u003cbr\u003e6.14 SM Neoprene: Retarding Scorch \u003cbr\u003e6.15 SM Neoprene: Silane Coupling \u003cbr\u003e6.16 SM Neoprene: Processing \u003cbr\u003e6.17 SM Neoprene: Silica Surface Area effects \u003cbr\u003e6.18 SM Neoprene: Silica Free Water Content \u003cbr\u003e6.19 SM Neoprene: Cord and Fabric Adhesion \u003cbr\u003e6.20 SM Neoprene: Brass Adhesion \u003cbr\u003e\u003cb\u003eChapter 7: COMPOUNDING PRECIPITATED SILICA IN NITRILE\u003c\/b\u003e\u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Silica and Carbon Black \u003cbr\u003e7.3 Silica Surface Area \u003cbr\u003e7.4 NBR\/PVC Blends \u003cbr\u003e7.5 Acceleration: Sulfur Content \u003cbr\u003e7.6 Accelerators \u003cbr\u003e7.7 Activators \u003cbr\u003e7.8 Silane Coupling \u003cbr\u003e7.9 Peroxide Curing \u003cbr\u003e7.10 Processing \u003cbr\u003e7.11 Zinc-Free Cure Systems \u003cbr\u003e7.12 Phenolic Resins \u003cbr\u003e7.13 NBR Adhesion to Brass \u003cbr\u003e7.14 NBR Adhesion to Fabric \u003cbr\u003eNitrile Formulary \u003cbr\u003eAppendix A: COMPOUNDING BASICS \u003cbr\u003eAppendix B: COMPOUNDING MATERIALS \u003cbr\u003eAppendix C: RUBBER PROCESSING \u003cbr\u003eAppendix D: PHYSICAL TESTING OF RUBBERAppendix E: COMMON COMPOUNDING ABBREVIATIONS \u003cbr\u003eINDEX\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nPPG (former).\u003cbr\u003eNorman Hewitt worked for 39 years with PPG and his work with precipitated silica is world renowned. His technical service activity with PPG included research and development projects on the mechanism and application of reinforcing silica in the rubber industry. This book is the culmination of his more than four decades of experience in the rubber industry.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:13:58-04:00","created_at":"2017-06-22T21:13:58-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2007","adhesion","antioxidant","book","brass","carbon black","coating","compounding","curing","Lead Oxide","Magnesium Oxide","natural rubber","NBR\/PVC","Neoprene","pH","plastisization","r-compounding","reinforcement","rubber","silica","Sulfur","surface","Zinc Oxide","Zinc-free"],"price":33000,"price_min":33000,"price_max":33000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378391108,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Compounding Precipitated Silica in Elastomers, Theory and Practice","public_title":null,"options":["Default Title"],"price":33000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-8155-1528-9","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1528-9.jpg?v=1499211446"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1528-9.jpg?v=1499211446","options":["Title"],"media":[{"alt":null,"id":353964392541,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1528-9.jpg?v=1499211446"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1528-9.jpg?v=1499211446","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Norman Hewitt \u003cbr\u003eISBN 978-0-8155-1528-9 \u003cbr\u003e\u003cbr\u003ePages: 578 pp, Hardback\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis valuable guide to compounding elastomers with precipitated silica covers principles, properties, mixing, testing and formulations from a practical perspective. This handbook and reference manual will serve those who work on part design, elastomer formulation, manufacturing and applications of elastomers. Ample discussion of compound specifications adds to the usefulness of this book to practitioners. Comparisons of carbon black and silica compounds throughout the book allow readers to select the most suitable formulation for applications ranging from tires to electrical insulation to shoe soles. \u003cbr\u003e\u003cbr\u003eThe author has over forty years of experience in the rubber industry highlighted by his 39 years at the PPG Rubber Research laboratories. A highlight of the book is the inclusion of studies conducted by the author which greatly adds to the richness of the contents.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003e\u003cbr\u003eChapter 1: SILICA AS A REINFORCING FILLER\u003c\/b\u003e\u003cbr\u003e1.1 Introduction \u003cbr\u003e1.2 Manufacture of Precipitated Silica \u003cbr\u003e1.3 Silica and Carbon black \u003cbr\u003e1.4 Silica Surface Area \u003cbr\u003e1.5 Silica Free Water \u003cbr\u003e1.6 Silica Free Water, Affect on Visible Dispersion \u003cbr\u003e1.7 Silica Surface Silanol groups \u003cbr\u003e1.8 Silica pH \u003cbr\u003e1.9 Soluble Salts in Silica \u003cbr\u003e1.10 Physical Form and Sensity of Silica \u003cbr\u003e1.11 Other Silica Properties \u003cbr\u003e1.12 Silane Treated Silicas \u003cbr\u003e\u003cb\u003eChapter 2: COMPOUNDING PRECIPITATED SILICA IN NATURAL RUBBER\u003c\/b\u003e\u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Silica and Carbon Black \u003cbr\u003e2.3 Activation: Zinc Oxide \u003cbr\u003e2.4 Cure Activation: Glycols \u003cbr\u003e2.5 Acceleration with Secondary Accelerators in Normal Sulfur Systems \u003cbr\u003e2.6 Acceleration: Single Accelerators in Normal Sulfur Systems \u003cbr\u003e2.7 Acceleration: Single Accelerators; Vulcanizate Properties \u003cbr\u003e2.8 Acceleration: Low Sulfur\/Sulfur Donor Systems \u003cbr\u003e2.9 Reversion \u003cbr\u003e2.10 Antioxidant Systems: Non-staining \u003cbr\u003e2.11 Plasticization \u003cbr\u003e2.12 Tear Resistance \u003cbr\u003e2.13 Tear Resistance: Contour Curve Studies of Silica Content Effects \u003cbr\u003e2.14 Tear Resistance: Silica Primary Particle Size \u003cbr\u003e2.15 Tear Resistance; Non-Marking Solid tires \u003cbr\u003e2.16 Shelf Aged Stiffness and Green Strength \u003cbr\u003e2.17 Peroxide Cure \u003cbr\u003e2.18 Peroxide Curing: Silica Reinforcement and Structure \u003cbr\u003e2.19 Peroxide Curing: Silica Surface Area \u003cbr\u003e2.20 Peroxide Cure: Silane Coupling \u003cbr\u003e2.21 Silane Coupling: Sulfur Cure Systems \u003cbr\u003e2.22 Zinc-Free Cure Systems \u003cbr\u003e2.23 Zinc-Free Cure Systems: Polyisoprene (IR) \u003cbr\u003e2.24 Brass Adhesion \u003cbr\u003e2.25 Brass Adhesion Mechanism \u003cbr\u003e2.26 Adhesion to Textile Fabrics; the HRH system \u003cbr\u003e2.27 Fabric Adhesion: Dynamic testing \u003cbr\u003e2.28 Heat Resistance \u003cbr\u003eNatural Rubber Formulary \u003cbr\u003e\u003cb\u003eChapter 3: COMPOUNDING PRECIPITATED SILICA IN EMULSION SBR\u003c\/b\u003e\u003cbr\u003e3.1 Introduction \u003cbr\u003e3.2 Silica and Carbon Black \u003cbr\u003e3.3 Cure Systems: Activation with Glycols \u003cbr\u003e3.4 Cure System: Zinc Oxide Activation \u003cbr\u003e3.5 Cure System: Magnesium Oxide Activation \u003cbr\u003e3.6 Cure system: Lead oxide (Litharge) Activation \u003cbr\u003e3.7 Cure System: Stearic acid \u003cbr\u003e3.8 Cure Systems: Primary, Secondary Accelerators \u003cbr\u003e3.9 Cure Systems: Single Accelerators \u003cbr\u003e3.10 Cure Systems: Sulfur Concentration \u003cbr\u003e3.11 Plasticization \u003cbr\u003e3.12 Antioxidants \u003cbr\u003e3.13 Tear Resistance: Silica Primary Particle Size \u003cbr\u003e3.14 Tear Resistance: Silica Content \u003cbr\u003e3.15 Fabric Adhesion \u003cbr\u003e3.16 Heat Resistance \u003cbr\u003e3.17 Silane coupling \u003cbr\u003e3.18 Silane Coupling: Competition \u003cbr\u003eEmulsion SBR Formulary \u003cbr\u003e\u003cb\u003eChapter 4: COMPOUNDING SILICA IN ELASTOMERS SOLUTION SBR AND BR\u003c\/b\u003e\u003cbr\u003e4.1 Introduction \u003cbr\u003e4.2 Silica and Carbon Black \u003cbr\u003e4.3 Zinc-Free Cure Systems \u003cbr\u003e4.4 Zinc-Free Cure Systems: Accelerators \u0026amp; Sulfur \u003cbr\u003e4.5 Zinc-Free Cure Systems: Polymer Effects \u003cbr\u003e4.6 Zinc-Free Cure Systems: Zinc oxide and HMT \u003cbr\u003e4.7 Zinc-Free Cure Systems: Effects of Additives \u003cbr\u003e4.8 Zinc-Free Cure systems: Sulfur content \u003cbr\u003e4.9 Zinc-Free Cure System: Antioxidants \u003cbr\u003e4.10 Zinc-Free Cure Systems: Processing \u003cbr\u003e4.11 Zinc-Free Systems: Plasticizers \u003cbr\u003e4.12 Zinc-Free Systems: Additive plasticizers \u003cbr\u003e4.13 Silane Coupling: Pretreated Silica \u003cbr\u003e4.14 Silane Coupling \u003cbr\u003e4.15 Zinc-Free Cure Systems: Surface Area Effects \u003cbr\u003e4.16 Zinc-Free Cure Systems: Trouser Tear Strength \u003cbr\u003e4.17 Zinc-Free Cure Systems ; Silica Content \u003cbr\u003e4.18 Zinc-Free Cure Systems: Durometer Equivalents \u003cbr\u003eSolution SBR and BR Formulary \u003cbr\u003e\u003cb\u003eChapter 5: COMPOUNDING SILICA IN ELASTOMERS EPDM\u003c\/b\u003e\u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Silica and Carbon Black \u003cbr\u003e5.3 Acceleration Systems \u003cbr\u003e5.4 Low Sulfur Systems with Donors \u003cbr\u003e5.5 Activation: Oxides and Glycols \u003cbr\u003e5.6 Antioxidants: Heat Resistance \u003cbr\u003e5.7 Zinc-Free Cure Systems \u003cbr\u003e5.8 Silane Coupling \u003cbr\u003e5.9 Silica Surface Area \u003cbr\u003e5.10 Peroxide Cure Systems \u003cbr\u003e5.11 Processing \u003cbr\u003e5.12 Adhesion to Brass \u003cbr\u003e5.13 Fabric Adhesion \u003cbr\u003e5.14 Adhesion to Zinc (Galvanized) Coatings \u003cbr\u003e5.15 Compression Fatigue Life \u003cbr\u003eEPDM Formulary \u003cbr\u003e\u003cb\u003eChapter 6: COMPOUNDING PRECIPITATED SILICA IN NEOPRENE\u003c\/b\u003e\u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 NSM (Type W) Neoprene: Oxide Crosslinking \u003cbr\u003e6.3 NSM Neoprene (W): Organic Acceleration \u003cbr\u003e6.4 NSM Neoprene: Glycol Activation \u003cbr\u003e6.5 NSM Neoprene: Plasticization \u003cbr\u003e6.6 NSM Neoprene: Silica and Black \u003cbr\u003e6.7 Silica Surface Area \u003cbr\u003e6.8 NSM Neoprene: Silane Coupling \u003cbr\u003e6.9 NSM Neoprene: Fabric Adhesion \u003cbr\u003e6.10 NSM Neoprene: Brass Adhesion \u003cbr\u003e6.11 NSM Neoprene: Water Absorption \u003cbr\u003e6.12 Sulfur Modified (SM) Neoprene: Cure Systems \u003cbr\u003e6.13 SM Neoprene: Glycol Activation \u003cbr\u003e6.14 SM Neoprene: Retarding Scorch \u003cbr\u003e6.15 SM Neoprene: Silane Coupling \u003cbr\u003e6.16 SM Neoprene: Processing \u003cbr\u003e6.17 SM Neoprene: Silica Surface Area effects \u003cbr\u003e6.18 SM Neoprene: Silica Free Water Content \u003cbr\u003e6.19 SM Neoprene: Cord and Fabric Adhesion \u003cbr\u003e6.20 SM Neoprene: Brass Adhesion \u003cbr\u003e\u003cb\u003eChapter 7: COMPOUNDING PRECIPITATED SILICA IN NITRILE\u003c\/b\u003e\u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Silica and Carbon Black \u003cbr\u003e7.3 Silica Surface Area \u003cbr\u003e7.4 NBR\/PVC Blends \u003cbr\u003e7.5 Acceleration: Sulfur Content \u003cbr\u003e7.6 Accelerators \u003cbr\u003e7.7 Activators \u003cbr\u003e7.8 Silane Coupling \u003cbr\u003e7.9 Peroxide Curing \u003cbr\u003e7.10 Processing \u003cbr\u003e7.11 Zinc-Free Cure Systems \u003cbr\u003e7.12 Phenolic Resins \u003cbr\u003e7.13 NBR Adhesion to Brass \u003cbr\u003e7.14 NBR Adhesion to Fabric \u003cbr\u003eNitrile Formulary \u003cbr\u003eAppendix A: COMPOUNDING BASICS \u003cbr\u003eAppendix B: COMPOUNDING MATERIALS \u003cbr\u003eAppendix C: RUBBER PROCESSING \u003cbr\u003eAppendix D: PHYSICAL TESTING OF RUBBERAppendix E: COMMON COMPOUNDING ABBREVIATIONS \u003cbr\u003eINDEX\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nPPG (former).\u003cbr\u003eNorman Hewitt worked for 39 years with PPG and his work with precipitated silica is world renowned. His technical service activity with PPG included research and development projects on the mechanism and application of reinforcing silica in the rubber industry. This book is the culmination of his more than four decades of experience in the rubber industry.\u003cbr\u003e\u003cbr\u003e"}

Engineering Elastomers...

$180.00

{"id":11242230660,"title":"Engineering Elastomers 2003","handle":"978-1-85957-369-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Geneva, Switzerland, 13-14 November 2003 \u003cbr\u003eISBN 978-1-85957-369-3 \u003cbr\u003e\u003cbr\u003epages 210\n\u003ch5\u003eSummary\u003c\/h5\u003e\nEngineering or specialty elastomers are the stalwart materials of the rubber industry. They are high volume and medium priced elastomers, often employed in demanding applications, such as the automotive, industrial, medical and electrical industries. The Engineering Elastomers 2003 conference had an exciting series of papers from authors in both Europe and the USA, addressing the opportunities for growth in engineering elastomers, as well as the challenges to producers and users operating in a rapidly changing competitive environment.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003eList of Papers\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eSession 1 Market Review\u003cbr\u003ePaper 1 - Elastomers and Feedstocks: A Market Outlook\u003cbr\u003ePaper 2 - An Overview of the Engineering Elastomer Industry in 2003 \u003cbr\u003e\u003cbr\u003eSession 2 Advances in Compounding and Production\u003cbr\u003ePaper 3 - Functionalisation of Polymers \u0026amp; Compatibilisation of Polymer Blends by a Novel Reactive Processing Approach\u003cbr\u003ePaper 4 - Precrosslinked Engineering Elastomers - What Are the Benefits? PAPER UNAVAILABLE AT TIME OF PRINT\u003cbr\u003ePaper 5 - High-Hardness Compounds in Papermill Roll Covers and the Role of Fillers Networking in their Dynamic Performance PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003ePaper 6 - Use of the NFM Iddon Cold Feed Extruder and Novel Low Temperature Curing EPDM to Reduce Processing and Curing Energy Consumption \u003cbr\u003e\u003cbr\u003eSession 3 Advances in Elastomers\u003cbr\u003ePaper 7 - Silicone Rubber – Looking Forward to the Next 60 Years!\u003cbr\u003ePaper 8 - Vistamaxx ™ - Novel Polyolefin Speciality Elastomers\u003cbr\u003ePaper 9 - HNBR - A Very Versatile Engineering Elastomer\u003cbr\u003ePaper 10 - Recent Progress in the Processing Performance of Compounds made with Viton® Fluoroelastomers PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003e\u003cbr\u003eSession 4 Additives and Vulcanising Agents\u003cbr\u003ePaper 11 - Lead-free Curing Systems for ECO – Comparison of Different Solutions\u003cbr\u003ePaper 12 - New High Purity Vulcanization Accelerator \u003cbr\u003e\u003cbr\u003eSession 5: Technologies and Materials Analysis\u003cbr\u003ePaper 13 - Analyses of Two-component Injected Parts\u003cbr\u003ePaper 14 - Rubber Fails in Tension - Mechanical Strength of Elastomeric Materials at Ambient and Elevated Temperatures \u003cbr\u003e\u003cbr\u003eSession 6: Developments In Production And Processing Technologies And Equipment\u003cbr\u003ePaper 15 - MIPs (Multi-Ingredient-Preweighs) unique improvements of process variation and dispersion by preblending chemicals\u003cbr\u003ePaper 16 - Latest Developments in Production Equipment, Moulds, and Automation for Processing of Engineering Elastomers\u003cbr\u003ePaper 17 - New Developments for the Optimisation of High Injection Moulded Elastomers Using 3D Simulation\u003cbr\u003ePaper 18 - Latest Developments in Thermal Balance Control in the Moulds \u003cbr\u003e\u003cbr\u003eSession 7 Inter-materials Competition\u003cbr\u003ePaper 19 - Weathersealing Sytems using Thermoplastic Vulcanizates and Thermoplastic Olefins\u003cbr\u003ePaper 20 - A unique closed cell sponge rubber material offering self-extinguishing and low smoke emission properties\u003cbr\u003ePaper 21 - Fluoroprene ™; A High Performance Fluorocarbon TPV \u003cbr\u003e\u003cbr\u003eSession 8 Developments In End Use Applications\u003cbr\u003ePaper 22 - Nordel® MG - “The Game Changer” - ... For TPV\u003cbr\u003ePaper 23 - Computer Aided Engineering of Elastomeric Components for Automobile Applications +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 24 eBusiness as Supporting Tool for Operation Excellence +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 25 - Elastomers in the Gas Industry in the Light of User Safety Requirements\u003cbr\u003ePaper 26 - Expanding the Applications of EPDM\/EPM Elastomers in the Pharmaceutical and Food Industries\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:15-04:00","created_at":"2017-06-22T21:14:15-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2003","acrylate rubber","additives","blends","book","compatibilisation","curing","curing systems","elastomers","engineering elastomers","EPDM","fillers","food","functionalisation","High-Hardness","molding","moulding","networking","Novel","pharmaceutical","polymers","precrosslinked","r-compounding","rubber","silicone rubber","temperature"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378402308,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Engineering Elastomers 2003","public_title":null,"options":["Default Title"],"price":18000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-369-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079","options":["Title"],"media":[{"alt":null,"id":361602744413,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Geneva, Switzerland, 13-14 November 2003 \u003cbr\u003eISBN 978-1-85957-369-3 \u003cbr\u003e\u003cbr\u003epages 210\n\u003ch5\u003eSummary\u003c\/h5\u003e\nEngineering or specialty elastomers are the stalwart materials of the rubber industry. They are high volume and medium priced elastomers, often employed in demanding applications, such as the automotive, industrial, medical and electrical industries. The Engineering Elastomers 2003 conference had an exciting series of papers from authors in both Europe and the USA, addressing the opportunities for growth in engineering elastomers, as well as the challenges to producers and users operating in a rapidly changing competitive environment.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003eList of Papers\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eSession 1 Market Review\u003cbr\u003ePaper 1 - Elastomers and Feedstocks: A Market Outlook\u003cbr\u003ePaper 2 - An Overview of the Engineering Elastomer Industry in 2003 \u003cbr\u003e\u003cbr\u003eSession 2 Advances in Compounding and Production\u003cbr\u003ePaper 3 - Functionalisation of Polymers \u0026amp; Compatibilisation of Polymer Blends by a Novel Reactive Processing Approach\u003cbr\u003ePaper 4 - Precrosslinked Engineering Elastomers - What Are the Benefits? PAPER UNAVAILABLE AT TIME OF PRINT\u003cbr\u003ePaper 5 - High-Hardness Compounds in Papermill Roll Covers and the Role of Fillers Networking in their Dynamic Performance PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003ePaper 6 - Use of the NFM Iddon Cold Feed Extruder and Novel Low Temperature Curing EPDM to Reduce Processing and Curing Energy Consumption \u003cbr\u003e\u003cbr\u003eSession 3 Advances in Elastomers\u003cbr\u003ePaper 7 - Silicone Rubber – Looking Forward to the Next 60 Years!\u003cbr\u003ePaper 8 - Vistamaxx ™ - Novel Polyolefin Speciality Elastomers\u003cbr\u003ePaper 9 - HNBR - A Very Versatile Engineering Elastomer\u003cbr\u003ePaper 10 - Recent Progress in the Processing Performance of Compounds made with Viton® Fluoroelastomers PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003e\u003cbr\u003eSession 4 Additives and Vulcanising Agents\u003cbr\u003ePaper 11 - Lead-free Curing Systems for ECO – Comparison of Different Solutions\u003cbr\u003ePaper 12 - New High Purity Vulcanization Accelerator \u003cbr\u003e\u003cbr\u003eSession 5: Technologies and Materials Analysis\u003cbr\u003ePaper 13 - Analyses of Two-component Injected Parts\u003cbr\u003ePaper 14 - Rubber Fails in Tension - Mechanical Strength of Elastomeric Materials at Ambient and Elevated Temperatures \u003cbr\u003e\u003cbr\u003eSession 6: Developments In Production And Processing Technologies And Equipment\u003cbr\u003ePaper 15 - MIPs (Multi-Ingredient-Preweighs) unique improvements of process variation and dispersion by preblending chemicals\u003cbr\u003ePaper 16 - Latest Developments in Production Equipment, Moulds, and Automation for Processing of Engineering Elastomers\u003cbr\u003ePaper 17 - New Developments for the Optimisation of High Injection Moulded Elastomers Using 3D Simulation\u003cbr\u003ePaper 18 - Latest Developments in Thermal Balance Control in the Moulds \u003cbr\u003e\u003cbr\u003eSession 7 Inter-materials Competition\u003cbr\u003ePaper 19 - Weathersealing Sytems using Thermoplastic Vulcanizates and Thermoplastic Olefins\u003cbr\u003ePaper 20 - A unique closed cell sponge rubber material offering self-extinguishing and low smoke emission properties\u003cbr\u003ePaper 21 - Fluoroprene ™; A High Performance Fluorocarbon TPV \u003cbr\u003e\u003cbr\u003eSession 8 Developments In End Use Applications\u003cbr\u003ePaper 22 - Nordel® MG - “The Game Changer” - ... For TPV\u003cbr\u003ePaper 23 - Computer Aided Engineering of Elastomeric Components for Automobile Applications +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 24 eBusiness as Supporting Tool for Operation Excellence +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 25 - Elastomers in the Gas Industry in the Light of User Safety Requirements\u003cbr\u003ePaper 26 - Expanding the Applications of EPDM\/EPM Elastomers in the Pharmaceutical and Food Industries\u003cbr\u003e\u003cbr\u003e"}

Mixing of Rubber, Clas...

$90.00

{"id":11242242628,"title":"Mixing of Rubber, Classic Rapra Reprints","handle":"978-1-84735-150-0","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: John M. Funt \u003cbr\u003eISBN 978-1-84735-150-0 \u003cbr\u003e\u003cbr\u003ehard-backed\n\u003ch5\u003eSummary\u003c\/h5\u003e\nIntroducing the new 'Classic Rapra Reprint' Series. Mixing of Rubber is the first book in a series of Classic Rapra Reprints. We have searched our previously published and successful reference books, and found some real gems! The content is sure to be of interest to those in the Rubber Mixing Industry, both new to the industry and those more experience, all will benefit...\u003cbr\u003e\u003cbr\u003eSince the discovery of vulcanisation in the nineteenth century, rubber has been a major industrial product. From its inception, the use of vulcanising agents, reinforcing fillers and other additives has been a major feature of the rubber industry. Innumerable articles and texts attest to the chemist's skill in balancing the chemical and physical properties of the manufactured products.\u003cbr\u003e\u003cbr\u003eMixing as a general operation may be considered as three basic processes occurring simultaneously. Simple mixing ensures that the mixture has a uniform composition throughout its bulk, at least when viewed on a scale large compared to the size of the individual particles. In the case of solids blending (Chapter 11), the particle size need not change, but the distribution of particles throughout the mixture approaches a random distribution. If the shear forces are sufficiently large, particles may fracture, as in dispersive mixing, and the polymer may flow, as in laminar mixing (Chapter 111). In both of these processes, the size of the original particles or fluid elements changes because of the mixing process. Then the properties of the mixture depending upon the size of the basic structures reached during mixing.\u003cbr\u003e\u003cbr\u003eIn the case of laminar mixing, the size may be the striation thickness of a hypothetical fluid element, which is inversely related to the total shear strain. If relatively strong particles, or aggregates of particles, are present, these must be reduced in size by the action of forces generated by flow in the mixer. Then the size is the actual additive particle size.\u003cbr\u003e\u003cbr\u003eThe relative balance between the importance of these three processes in determining the efficiency of mixing and the product quality depends upon the attraction between additive particles, the rubber flow properties, the geometry of the mixer and the operating conditions such as temperature, mixing time and rotor speed.\u003cbr\u003eThe interaction of operating conditions, raw material properties and the quality of mixing can be a formidable phenomenon to analyse. However, in many cases, a number of simplifying assumptions about the operation can be made.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction\u003cbr\u003e2. Blending of Particles\u003cbr\u003e3. Laminar and Dispersive Mixing (Sample Chapter - click on link above)\u003cbr\u003e4. The Milling of Rubbers\u003cbr\u003e5. Internal Mixers\u003cbr\u003e6. Continuous Mixers\u003cbr\u003e7. Powdered Rubbers","published_at":"2017-06-22T21:14:51-04:00","created_at":"2017-06-22T21:14:51-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2009","blending","book","dispersive mixing","laminar mixing","mixers","mixing rubber","r-compounding","rubber"],"price":9000,"price_min":9000,"price_max":9000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378443652,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mixing of Rubber, Classic Rapra Reprints","public_title":null,"options":["Default Title"],"price":9000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-84735-150-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-150-0.jpg?v=1499727686"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-150-0.jpg?v=1499727686","options":["Title"],"media":[{"alt":null,"id":358513475677,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-150-0.jpg?v=1499727686"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-150-0.jpg?v=1499727686","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: John M. Funt \u003cbr\u003eISBN 978-1-84735-150-0 \u003cbr\u003e\u003cbr\u003ehard-backed\n\u003ch5\u003eSummary\u003c\/h5\u003e\nIntroducing the new 'Classic Rapra Reprint' Series. Mixing of Rubber is the first book in a series of Classic Rapra Reprints. We have searched our previously published and successful reference books, and found some real gems! The content is sure to be of interest to those in the Rubber Mixing Industry, both new to the industry and those more experience, all will benefit...\u003cbr\u003e\u003cbr\u003eSince the discovery of vulcanisation in the nineteenth century, rubber has been a major industrial product. From its inception, the use of vulcanising agents, reinforcing fillers and other additives has been a major feature of the rubber industry. Innumerable articles and texts attest to the chemist's skill in balancing the chemical and physical properties of the manufactured products.\u003cbr\u003e\u003cbr\u003eMixing as a general operation may be considered as three basic processes occurring simultaneously. Simple mixing ensures that the mixture has a uniform composition throughout its bulk, at least when viewed on a scale large compared to the size of the individual particles. In the case of solids blending (Chapter 11), the particle size need not change, but the distribution of particles throughout the mixture approaches a random distribution. If the shear forces are sufficiently large, particles may fracture, as in dispersive mixing, and the polymer may flow, as in laminar mixing (Chapter 111). In both of these processes, the size of the original particles or fluid elements changes because of the mixing process. Then the properties of the mixture depending upon the size of the basic structures reached during mixing.\u003cbr\u003e\u003cbr\u003eIn the case of laminar mixing, the size may be the striation thickness of a hypothetical fluid element, which is inversely related to the total shear strain. If relatively strong particles, or aggregates of particles, are present, these must be reduced in size by the action of forces generated by flow in the mixer. Then the size is the actual additive particle size.\u003cbr\u003e\u003cbr\u003eThe relative balance between the importance of these three processes in determining the efficiency of mixing and the product quality depends upon the attraction between additive particles, the rubber flow properties, the geometry of the mixer and the operating conditions such as temperature, mixing time and rotor speed.\u003cbr\u003eThe interaction of operating conditions, raw material properties and the quality of mixing can be a formidable phenomenon to analyse. However, in many cases, a number of simplifying assumptions about the operation can be made.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction\u003cbr\u003e2. Blending of Particles\u003cbr\u003e3. Laminar and Dispersive Mixing (Sample Chapter - click on link above)\u003cbr\u003e4. The Milling of Rubbers\u003cbr\u003e5. Internal Mixers\u003cbr\u003e6. Continuous Mixers\u003cbr\u003e7. Powdered Rubbers"}

Natural Ageing of Rubb...

$220.00

{"id":11242258564,"title":"Natural Ageing of Rubber: Changes in Physical Properties Over 40 Years","handle":"978-1-85957-209-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: R.P. Brown and T. Butler \u003cbr\u003eISBN 978-1-85957-209-2 \u003cbr\u003e\u003cbr\u003epages 175\n\u003ch5\u003eSummary\u003c\/h5\u003e\nA unique collection of long-term ageing data, available for the first time, from Rapra Technology Limited. \u003cbr\u003eThis report is an output from the Weathering of Elastomers and Sealants project which forms part of the UK government’s Department of Trade and Industry’s Degradation of Materials in Aggressive Environments Programme. \u003cbr\u003e\u003cbr\u003eRapra Technology Limited has just completed a comprehensive natural ageing and physical testing programme on 19 rubber compounds, stored in controlled conditions, for a period of 40 years. This is believed to be the most extensive such study ever carried out. Now, for the first time, all the results of this unique programme have been published in this report. \u003cbr\u003e\u003cbr\u003eThe properties of natural and synthetic rubbers suit them to a diverse range of applications, many of which demand a prolonged service life, and the retention of some or all of their mechanical properties for years or even decades. When the ageing programme was conceived in the 1950s, rubber product manufacturers were faced with a wider range of raw rubbers than had ever been available before. The relatively recent development of some of these materials also meant that there was little information available regarding their longevity. Thus the need was identified for a systematic programme of storage and testing. \u003cbr\u003e\u003cbr\u003eRubber formulations were selected to represent those used in a wide range of applications, including general purpose and ‘good ageing’ grades. Remarkably, most of these formulations are still representative of compounds being specified today. The following rubbers were studied: \u003cbr\u003e\u003cbr\u003e-Natural rubber \u003cbr\u003e-Styrene-butadiene rubber \u003cbr\u003e-Butyl rubber \u003cbr\u003e-Polychloroprene \u003cbr\u003e-Nitrile rubber \u003cbr\u003e-Acrylate rubber \u003cbr\u003e-Chlorosulphonated polyethylene \u003cbr\u003e-Polysulphide rubber \u003cbr\u003e-Silicone rubber \u003cbr\u003eSamples were stored under temperate and tropical climatic conditions, and at various intervals, the following properties were measured: \u003cbr\u003e\u003cbr\u003e-Hardness \u003cbr\u003e-Volume change \u003cbr\u003e-Resilience \u003cbr\u003e-Volume and surface resistivity \u003cbr\u003e-Tensile strength Elongation at break \u003cbr\u003e-Modulus at 100% and 300% elongation \u003cbr\u003e-Long and short-term compression set \u003cbr\u003e-Low temperature stiffness \u003cbr\u003eThe results of all these tests are presented graphically in this report, allowing the rate of deterioration of properties and the influence of the environment to be clearly seen. Properties after 40 years are also tabulated, together with calculations of percentage change. \u003cbr\u003e\u003cbr\u003eThis information will prove invaluable to anyone specifying or supplying rubber materials or components. Further work is now being carried out on the properties of the same formulations after accelerated ageing.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:15:39-04:00","created_at":"2017-06-22T21:15:39-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2000","acrylate rubber","book","butyl rubber","compounding of rubber","compression","elongation at break","hardness","health","natural rubber","nitrile rubber","polychloroprene","polysulphide rubber","r-compounding","r-properties","resilience","rubber","safety","silicone rubber","styrene-butadiene rubber","surface resistivity","tensile strength","toxicity","volume change","volume resistivity"],"price":22000,"price_min":22000,"price_max":22000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378507908,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Natural Ageing of Rubber: Changes in Physical Properties Over 40 Years","public_title":null,"options":["Default Title"],"price":22000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-209-2","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-209-2.jpg?v=1499727722"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-209-2.jpg?v=1499727722","options":["Title"],"media":[{"alt":null,"id":358525337693,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-209-2.jpg?v=1499727722"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-209-2.jpg?v=1499727722","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: R.P. Brown and T. Butler \u003cbr\u003eISBN 978-1-85957-209-2 \u003cbr\u003e\u003cbr\u003epages 175\n\u003ch5\u003eSummary\u003c\/h5\u003e\nA unique collection of long-term ageing data, available for the first time, from Rapra Technology Limited. \u003cbr\u003eThis report is an output from the Weathering of Elastomers and Sealants project which forms part of the UK government’s Department of Trade and Industry’s Degradation of Materials in Aggressive Environments Programme. \u003cbr\u003e\u003cbr\u003eRapra Technology Limited has just completed a comprehensive natural ageing and physical testing programme on 19 rubber compounds, stored in controlled conditions, for a period of 40 years. This is believed to be the most extensive such study ever carried out. Now, for the first time, all the results of this unique programme have been published in this report. \u003cbr\u003e\u003cbr\u003eThe properties of natural and synthetic rubbers suit them to a diverse range of applications, many of which demand a prolonged service life, and the retention of some or all of their mechanical properties for years or even decades. When the ageing programme was conceived in the 1950s, rubber product manufacturers were faced with a wider range of raw rubbers than had ever been available before. The relatively recent development of some of these materials also meant that there was little information available regarding their longevity. Thus the need was identified for a systematic programme of storage and testing. \u003cbr\u003e\u003cbr\u003eRubber formulations were selected to represent those used in a wide range of applications, including general purpose and ‘good ageing’ grades. Remarkably, most of these formulations are still representative of compounds being specified today. The following rubbers were studied: \u003cbr\u003e\u003cbr\u003e-Natural rubber \u003cbr\u003e-Styrene-butadiene rubber \u003cbr\u003e-Butyl rubber \u003cbr\u003e-Polychloroprene \u003cbr\u003e-Nitrile rubber \u003cbr\u003e-Acrylate rubber \u003cbr\u003e-Chlorosulphonated polyethylene \u003cbr\u003e-Polysulphide rubber \u003cbr\u003e-Silicone rubber \u003cbr\u003eSamples were stored under temperate and tropical climatic conditions, and at various intervals, the following properties were measured: \u003cbr\u003e\u003cbr\u003e-Hardness \u003cbr\u003e-Volume change \u003cbr\u003e-Resilience \u003cbr\u003e-Volume and surface resistivity \u003cbr\u003e-Tensile strength Elongation at break \u003cbr\u003e-Modulus at 100% and 300% elongation \u003cbr\u003e-Long and short-term compression set \u003cbr\u003e-Low temperature stiffness \u003cbr\u003eThe results of all these tests are presented graphically in this report, allowing the rate of deterioration of properties and the influence of the environment to be clearly seen. Properties after 40 years are also tabulated, together with calculations of percentage change. \u003cbr\u003e\u003cbr\u003eThis information will prove invaluable to anyone specifying or supplying rubber materials or components. Further work is now being carried out on the properties of the same formulations after accelerated ageing.\u003cbr\u003e\u003cbr\u003e"}

Rubber Technologist's ...

$245.00

Select options

{"id":11242234500,"title":"Rubber Technologist's Handbook, Volume 2","handle":"978-1-84735-099-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by J. White, S.S. De, and K. Naskar \u003cbr\u003eISBN 978-1-84735-099-2 \u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cbr\u003ePublished: 2008 \u003c\/span\u003e\u003cbr\u003e\n\u003ch5\u003e\n\u003cbr\u003eSummary\u003c\/h5\u003e\nThis book is a companion volume to Rubber Technologists Handbook published in 2001. Written by experts in their respective fields, this handbook discusses the most recent developments in the subject.\u003cbr\u003e\u003cbr\u003eThe ten chapters cover Microscopic Imaging of Rubber Compounds, Intelligent Tyres, Silica-Filled Rubber Compounds, Fibres In The Rubber Industry, Naval and Space Applications of Rubber, Advances in Fillers for the Rubber Industry, Thermoplastic Elastomers by Dynamic Vulcanisation, Polymers In Cable Applications, Durability of Rubber Compounds, and Radiochemical Ageing of Ethylene-Propylene-Diene Monomer\u003cbr\u003e\u003cbr\u003eThis book will serve the needs of those who are already in the rubber industry and new entrants to the field who aspire to build a career in rubber and allied areas. Materials Science students and researchers, designers and engineers should all find this handbook helpful.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003e1 Microscopic Imaging of Rubber Compounds\u003c\/strong\u003e\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Fillers and Elastomer Reinforcement\u003cbr\u003e1.3 Characterisation of the Filler Dispersion\u003cbr\u003e1.3.1 Techniques\u003cbr\u003e1.3.2 Microscopy\u003cbr\u003e1.3.3 Automated Image Analysis\u003cbr\u003e1.4 Analytical Procedure by TEM\/AIA\u003cbr\u003e1.4.1 Preparation of the Samples and TEM Images\u003cbr\u003e1.4.2 Image Digitalisation\u003cbr\u003e1.4.3 Image Analysis\u003cbr\u003e1.4.4 Statistical Analysis\u003cbr\u003e1.5 Morphology of Carbon Black Dispersions\u003cbr\u003e1.5.1 Dry state\u003cbr\u003e1.5.2 Compounds\u003cbr\u003e1.6 Morphometric Analysis on Silica Filled Compounds\u003cbr\u003e1.6.1 Atomic Force Microscopy\/Automated Image Analysis\u003cbr\u003e1.6.2 Transmission Electron Microscopy\/Automated Image Analysis\u003cbr\u003e1.6.3 Microdensitometry and 3D-TEM\/Electron Tomography\u003cbr\u003eAcknowledgements\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2 Intelligent Tyres\u003c\/strong\u003e\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Features of the Intelligent Tyre\u003cbr\u003e2.2.1 Identification and Memory\u003cbr\u003e2.2.2 Temperature\u003cbr\u003e2.2.3 Inflation Pressure\u003cbr\u003e2.2.4 Cornering Forces\u003cbr\u003e2.2.5 Tyre Mileage\u003cbr\u003e2.2.6 Treadwear\u003cbr\u003e2.3 Historical Perspective\u003cbr\u003e2.3.1 Tyres\u003cbr\u003e2.3.2 Competing Products - Wheel-based Systems\u003cbr\u003e2.3.3 The TREAD Act of 2000\u003cbr\u003e2.3.4 Outlook for Intelligent Tyres\u003cbr\u003e2.4 Design of the Intelligent Tyre System\u003cbr\u003e2.4.1 Tyre\u003cbr\u003e2.4.2 Electronics\u003cbr\u003e2.4.3 Signal from Tyre\u003cbr\u003e2.4.4 Readers\u003cbr\u003e2.5 Standards\u003cbr\u003e2.6 Summary\u003cbr\u003eAcknowledgement\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3 Silica-Filled Rubber Compounds\u003c\/strong\u003e\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Characteristics of High-Dispersion Silicas\u003cbr\u003e3.2.1 Various Classes of Silicas: Pyrogenic versus Precipitated, and their Production\u003cbr\u003e3.2.2 Properties of Highly Dispersible Silicas\u003cbr\u003e3.2.3 Compatibility Aspects\u003cbr\u003e3.3 Coupling Agents\u003cbr\u003e3.3.1 Types of Commonly used Coupling Agents\u003cbr\u003e3.3.2 Reactions Between Silica, Silane Coupling Agent and Rubber Polymer\u003cbr\u003e3.3.3 Kinetics\u003cbr\u003e3.3.4 Alternative Coupling Agents\u003cbr\u003e3.4 Characterisation Methods for Silica-Rubber Coupling\u003cbr\u003e3.4.1 Rubber Reinforcement by Silica versus Carbon Black\u003cbr\u003e3.4.2 The Payne Effect\u003cbr\u003e3.4.3 Hysteresis Properties: tan d at 60 °C\u003cbr\u003e3.4.4 Alternative Means to Quantify Filler-Filler and Filler-Polymer Interaction\u003cbr\u003e3.5 Mixing of Silica-Rubber Compounds\u003cbr\u003e3.5.1 Effect of TESPT on the Properties of Uncured and Cured Compounds\u003cbr\u003e3.5.2 Properties of Uncured Compounds in Relation to the Dump Temperature in the Presence of TESPT \u003cbr\u003eSilane Coupling Agent\u003cbr\u003e3.5.3 Effect of the Dump Temperature on the Tensile Properties of Cured Samples\u003cbr\u003e3.5.4 Interactions Between Time and Temperature as an Indication of Reaction Kinetics of the \u003cbr\u003eCoupling Reaction\u003cbr\u003e3.5.5 Effect of Mixer Size and Rotor Type\u003cbr\u003e3.5.6 considerations on Mixer Operation\u003cbr\u003e3.6 Conclusions\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 Fibres in the Rubber Industry\u003c\/strong\u003e\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Fibre Types and General Properties\u003cbr\u003e4.2.1 Cotton\u003cbr\u003e4.2.2 Rayon\u003cbr\u003e4.2.3 Polyamides\u003cbr\u003e4.2.4 Polyester, Poly(ethylene terephthalate) (PET)\u003cbr\u003e4.2.5 Aramid\u003cbr\u003e4.2.6 Others\u003cbr\u003e4.3 Yarn and Cord Processes\u003cbr\u003e4.3.1 Twisting\u003cbr\u003e4.3.2 Texturing\u003cbr\u003e4.4 Fibre Units\u003cbr\u003e4.4.1 Titer: Tex and Denier\u003cbr\u003e4.4.2 Tenacity and Modulus: g\/denier, N\/tex or GPa\u003cbr\u003e4.5 Adhesion\u003cbr\u003e4.5.1 Types of Adhesive Interactions\u003cbr\u003e4.6 Dipping Process\u003cbr\u003e4.6.1 Factors Influencing Adhesion in Standard Resorcinol Formaldehyde Latex (RFL) Treatment\u003cbr\u003e4.7 Alternative Dip Treatments for Polyester or Aramid\u003cbr\u003e4.8 Chemically Altering the Surface\u003cbr\u003e4.8.1 Polyester\u003cbr\u003e4.9 Plasma Treatment\u003cbr\u003e4.10 Rubber Treatment\u003cbr\u003e4.10.1 Mixing Ingredients\u003cbr\u003e4.10.2 Chemical Modification of Rubber\u003cbr\u003e4.11 Methods for Analysis\u003cbr\u003e4.11.1 Pullout Tests\u003cbr\u003e4.11.2 Peel Tests\u003cbr\u003e4.11.3 Surface Analysis\u003cbr\u003e4.12 Fibres in Tyres\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 Naval and Space Applications of Rubber\u003c\/strong\u003e\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Acoustic Applications\u003cbr\u003e5.2.1 Sonar Rubber Domes\u003cbr\u003e5.2.2 Active Sonar\u003cbr\u003e5.2.3 Insulation\u003cbr\u003e5.3 Solid Rocket Propellants\u003cbr\u003e5.4 Blast Mitigative Coatings\u003cbr\u003e5.5 Aircraft Tyres\u003cbr\u003e5.6 Airships\u003cbr\u003e5.7 Inflatable Seacraft\u003cbr\u003e5.7.1 Combat Rubber Raiding Craft\u003cbr\u003e5.7.2 Hovercraft\u003cbr\u003e5.8 Rubber Sealants\u003cbr\u003e5.9 Miscellaneous Applications\u003cbr\u003e5.9.1 Rubber Bullets\u003cbr\u003e5.9.2 Intrusion Barriers\u003cbr\u003e5.9.3 Elastomeric Torpedo Launcher\u003cbr\u003e5.9.4 Mobile Offshore Base\u003cbr\u003eAcknowledgements\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6 Advances in Fillers for the Rubber Industry\u003c\/strong\u003e\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Requirements for Fillers in Tyre Applications\u003cbr\u003e6.3 Advances in Carbon Black\u003cbr\u003e6.3.1 Chemically-Modified Carbon Blacks\u003cbr\u003e6.3.2 Inversion Carbon Blacks\u003cbr\u003e6.4 Filler Particles Containing Both Carbon Black and Silica\u003cbr\u003e6.4.1 Carbon-Silica Dual Phase Filler\u003cbr\u003e6.4.2 Silica-Coated Carbon Blacks\u003cbr\u003e6.5 Advances in Silica and Other Filler Materials\u003cbr\u003e6.5.1 New Precipitated Silica for Silicone Rubber\u003cbr\u003e6.5.2 Starch\u003cbr\u003e6.5.3 Organo-Clays\u003cbr\u003e6.6 Advanced Rubber-Filler Masterbatches\u003cbr\u003e6.6.1 Cabot Elastomer Composites\u003cbr\u003e6.6.2 Powdered Rubber\u003cbr\u003e6.7 Concluding Remarks\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7 Thermoplastic Elastomers by Dynamic Vulcanisation\u003c\/strong\u003e\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Polymer Blends\u003cbr\u003e7.3 Classification of TPE\u003cbr\u003e7.4 Dynamic Vulcanisation\u003cbr\u003e7.5 Production of TPV\u003cbr\u003e7.6 PP\/EPDM TPV\u003cbr\u003e7.6.1 Crosslinking Agents For PP\/EPDM TPV\u003cbr\u003e7.6.2 Morphology of PP\/EPDM TPV\u003cbr\u003e7.7 Rheology and Processing of TPV\u003cbr\u003e7.8 Compounding in TPV\u003cbr\u003e7.9 End Use Applications of TPV\u003cbr\u003e7.10 Concluding Remarks\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8 Polymers in Cable Application\u003c\/strong\u003e\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Broad Classification of Cables\u003cbr\u003e8.2.1 Rigid Power Cables\u003cbr\u003e8.2.2 Flexible Power and Control Cables\u003cbr\u003e8.2.3 Special Purpose Cables\u003cbr\u003e8.3 Components of Cable\u003cbr\u003e8.3.1 Conductor\u003cbr\u003e8.3.2 Insulation\u003cbr\u003e8.3.3 Significance of Different Properties on Cable Insulation Quality and Performance\u003cbr\u003e8.3.4 Chemical Resistance\u003cbr\u003e8.3.5 Selection Criteria for Insulation\u003cbr\u003e8.4 Cable Jacket (Sheath)\u003cbr\u003e8.4.1 Property Requirements of Cable Jacketing Materials\u003cbr\u003e8.4.2 Criteria for Selection of Sheaths (Cable Jacket)\u003cbr\u003e8.5 Semi Conductive Components for High Voltage Cable\u003cbr\u003e8.5.1 Property Requirements of Semi-conductive Compounds\u003cbr\u003e8.6 Different Cable Materials\u003cbr\u003e8.6.1 Polymers used in Cables as Insulation, Sheathing and Semi-conducting Materials\u003cbr\u003e8.6.2 Common Elastomers for Cables\u003cbr\u003e8.6.3 Specialty Elastomers for Cables\u003cbr\u003e8.6.4 Thermoplastic Elastomers for Cables\u003cbr\u003e8.6.5 High-Temperature Thermoplastics and Thermosets\u003cbr\u003e8.7 Different Methods of PE to XLPE Conversion\u003cbr\u003e8.7.1 Crosslinking by High-Energy Irradiation (Electron Beam)\u003cbr\u003e8.7.2 Crosslinking by the Sioplas Technique\u003cbr\u003e8.8 Different Compounding Ingredients\u003cbr\u003e8.8.1 Crosslinking Agents\u003cbr\u003e8.8.2 Metal Oxides\u003cbr\u003e8.8.3 Organic Peroxides and Other Curing Agents\u003cbr\u003e8.8.4 Accelerators\u003cbr\u003e8.8.5 Antioxidants\u003cbr\u003e8.8.6 Antiozonants\u003cbr\u003e8.8.7 Fillers\u003cbr\u003e8.8.8 Auxiliary Additives\u003cbr\u003e8.8.9 Plasticiser, Softeners, Processing Aids\u003cbr\u003e8.8.10 Coupling-agents\u003cbr\u003e8.9 Cable Manufacturing Process\u003cbr\u003e8.9.1 Basic Principles of Compounding\u003cbr\u003e8.9.2 Internal Mixing\u003cbr\u003e8.9.3 Open Mixing\u003cbr\u003e8.9.4 Application of Cable Insulation Covering\u003cbr\u003e8.9.5 Curing of Cable\u003cbr\u003e8.9.6 Dual Extrusion System\u003cbr\u003e8.9.7 Triple Extrusion System\u003cbr\u003e8.9.8 Improvement in CV Curing Techniques\u003cbr\u003e8.10 Quality Checks and Tests\u003cbr\u003e8.11 Polymers in some Specialty Cables\u003cbr\u003e8.11.1 Mining Cable\u003cbr\u003e8.11.2 Aircraft and Spacecraft Cable\u003cbr\u003e8.11.3 Nuclear Power Cables\u003cbr\u003e8.11.4 Ship Board and Marine Cables\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9 Durability of Rubber Compounds\u003c\/strong\u003e\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Oxidation and Antioxidant Chemistry\u003cbr\u003e9.2.1 Introduction\u003cbr\u003e9.2.2 Mechanism of Rubber Oxidation\u003cbr\u003e9.2.3 Stabilisation Mechanism of Antioxidants\u003cbr\u003e9.2.4 Methods of Studying the Oxidation Resistance of Rubber\u003cbr\u003e9.3 Ozone and Antiozonant Chemistry\u003cbr\u003e9.3.1 Introduction\u003cbr\u003e9.3.2 Mechanism of Ozone Attack on Elastomers\u003cbr\u003e9.3.3 Mechanism of Antiozonants\u003cbr\u003e9.4 Mechanism of Protection Against Flex Cracking\u003cbr\u003e9.5 Trends Towards Long-Lasting Antidegradants\u003cbr\u003e9.5.1 Introduction\u003cbr\u003e9.5.2 Long-Lasting Antioxidants\u003cbr\u003e9.5.3 Long-Lasting Antiozonants\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10 Radiochemical Ageing of Ethylene-Propylene-Diene \u003cbr\u003eMonomer Elastomers\u003c\/strong\u003e\u003cbr\u003eIntroduction\u003cbr\u003eRadiochemical Degradation\u003cbr\u003eUnits\u003cbr\u003eRadiation Sources\u003cbr\u003eCommercial Processes and Applications\u003cbr\u003eExperimental\u003cbr\u003eMaterials\u003cbr\u003eIrradiation\u003cbr\u003e10.1 Degradation Under Inert Atmosphere\u003cbr\u003e10.1.1 Infra Red (IR) Analysis\u003cbr\u003e10.1.2 UV-vis Analysis\u003cbr\u003e10.1.3 Evaluation of Crosslinking\u003cbr\u003e10.1.4 Mass Spectrometry Analysis\u003cbr\u003e10.1.5 Mechanism of Degradation Under an Inert Atmosphere\u003cbr\u003e10.2 Identification and Quantification of Chemical Changes in EPDM and EPR Films g-Irradiated Under Oxygen Atmosphere\u003cbr\u003e10.2.1 IR Analysis\u003cbr\u003e10.2.2 UV-vis Analysis\u003cbr\u003e10.2.3 Analysis of the Oxidation Products\u003cbr\u003e10.2.4 Gamma Irradiation in vacuo of Hydroperoxides \u003cbr\u003eFormed in EPDM Films\u003cbr\u003e10.2.5 Mass Spectrometry Analysis\u003cbr\u003e10.2.6 Evaluation of Crosslinking\u003cbr\u003e10.2.7 Post-Irradiation Analysis\u003cbr\u003e10.2.8 Conclusion\u003cbr\u003e10.3 Mechanism of Radiooxidation\u003cbr\u003e10.3.1 Formation of Hydroperoxides\u003cbr\u003e10.3.2 Recombination of Peroxy Radicals\u003cbr\u003e10.3.3 Conclusion\u003cbr\u003e10.4 Evaluation of Some Anti-Oxidants\u003cbr\u003e10.4.1 Experimental\u003cbr\u003e10.4.2 Experimental Results\u003cbr\u003e10.4.3 Conclusion\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11 Silicone Rubber\u003c\/strong\u003e\u003cbr\u003e11.1 Introduction\u003cbr\u003e11.2 Chemistry\u003cbr\u003e11.3 Manufacturing\u003cbr\u003e11.4 Three Major Classifications of Silicone Rubber\u003cbr\u003e11.5 Properties\u003cbr\u003e11.5.1 Heat Resistance Property\u003cbr\u003e11.5.2 Low-Temperature Flexibility\u003cbr\u003e11.5.3 Mechanical Properties\u003cbr\u003e11.5.4 Compression Set\u003cbr\u003e11.5.5 Oil and Solvent Resistance\u003cbr\u003e11.5.6 Steam Resistance\u003cbr\u003e11.5.7 Water Resistance\u003cbr\u003e11.5.8 Electrical Properties\u003cbr\u003e11.5.9 Bio-compatibility\u003cbr\u003e11.5.10 Permeability\u003cbr\u003e11.5.11 Damping Characteristics\u003cbr\u003e11.5.12 Surface Energy or Release Property\u003cbr\u003e11.5.13 Weathering Resistance\u003cbr\u003e11.5.14 Radiation Resistance\u003cbr\u003e11.5.15 Thermal Ablative\u003cbr\u003e11.6 Compounding\u003cbr\u003e11.6.1 Silicone Gums\u003cbr\u003e11.6.2 Reinforced Gums (Bases)\u003cbr\u003e11.6.3 Filler\u003cbr\u003e11.6.4 Softener\u003cbr\u003e11.6.5 Vulcanisation\u003cbr\u003e11.7 Processing\u003cbr\u003e11.7.1 Mixing\u003cbr\u003e11.7.2 Moulding\u003cbr\u003e11.7.3 Extrusion\u003cbr\u003e11.7.4 Oven Curing\u003cbr\u003e11.7.5 Sponge\u003cbr\u003e11.7.6 Calendering\u003cbr\u003e11.7.7 Co-moulding and Over-moulding\u003cbr\u003e11.8 Troubleshooting\u003cbr\u003e11.9 Applications\u003cbr\u003e11.9.1 Automotive Applications\u003cbr\u003e11.9.2 Aerospace Applications\u003cbr\u003e11.9.3 Electrical and Electronics\u003cbr\u003e11.9.4 Coatings\u003cbr\u003e11.9.5 Appliances\u003cbr\u003e11.9.6 Foams\u003cbr\u003e11.9.7 Medical Products\u003cbr\u003e11.9.8 Baby Care\u003cbr\u003e11.9.9 Consumer Products\u003cbr\u003eAcknowledgements\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:26-04:00","created_at":"2017-06-22T21:14:26-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2008","ageing","book","cable","compounds","durability","fibers","fillers","imaging","polymers","r-compounding","rubber","rubber formulary","silica-filled rubber","silicone","tyres","vulcanisation"],"price":24500,"price_min":24500,"price_max":29900,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378416772,"title":"Soft cover","option1":"Soft cover","option2":null,"option3":null,"sku":"978-1-84735-099-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rubber Technologist's Handbook, Volume 2 - Soft cover","public_title":"Soft cover","options":["Soft cover"],"price":24500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-84735-099-2","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":50445044612,"title":"Hard cover","option1":"Hard cover","option2":null,"option3":null,"sku":"978-1-84735-100-5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rubber Technologist's Handbook, Volume 2 - Hard cover","public_title":"Hard cover","options":["Hard cover"],"price":29900,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-84735-099-978-1-84735-100-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-099-2.jpg?v=1499955376"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-099-2.jpg?v=1499955376","options":["Cover"],"media":[{"alt":null,"id":358741868637,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-099-2.jpg?v=1499955376"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-84735-099-2.jpg?v=1499955376","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by J. White, S.S. De, and K. Naskar \u003cbr\u003eISBN 978-1-84735-099-2 \u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cbr\u003ePublished: 2008 \u003c\/span\u003e\u003cbr\u003e\n\u003ch5\u003e\n\u003cbr\u003eSummary\u003c\/h5\u003e\nThis book is a companion volume to Rubber Technologists Handbook published in 2001. Written by experts in their respective fields, this handbook discusses the most recent developments in the subject.\u003cbr\u003e\u003cbr\u003eThe ten chapters cover Microscopic Imaging of Rubber Compounds, Intelligent Tyres, Silica-Filled Rubber Compounds, Fibres In The Rubber Industry, Naval and Space Applications of Rubber, Advances in Fillers for the Rubber Industry, Thermoplastic Elastomers by Dynamic Vulcanisation, Polymers In Cable Applications, Durability of Rubber Compounds, and Radiochemical Ageing of Ethylene-Propylene-Diene Monomer\u003cbr\u003e\u003cbr\u003eThis book will serve the needs of those who are already in the rubber industry and new entrants to the field who aspire to build a career in rubber and allied areas. Materials Science students and researchers, designers and engineers should all find this handbook helpful.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003e1 Microscopic Imaging of Rubber Compounds\u003c\/strong\u003e\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Fillers and Elastomer Reinforcement\u003cbr\u003e1.3 Characterisation of the Filler Dispersion\u003cbr\u003e1.3.1 Techniques\u003cbr\u003e1.3.2 Microscopy\u003cbr\u003e1.3.3 Automated Image Analysis\u003cbr\u003e1.4 Analytical Procedure by TEM\/AIA\u003cbr\u003e1.4.1 Preparation of the Samples and TEM Images\u003cbr\u003e1.4.2 Image Digitalisation\u003cbr\u003e1.4.3 Image Analysis\u003cbr\u003e1.4.4 Statistical Analysis\u003cbr\u003e1.5 Morphology of Carbon Black Dispersions\u003cbr\u003e1.5.1 Dry state\u003cbr\u003e1.5.2 Compounds\u003cbr\u003e1.6 Morphometric Analysis on Silica Filled Compounds\u003cbr\u003e1.6.1 Atomic Force Microscopy\/Automated Image Analysis\u003cbr\u003e1.6.2 Transmission Electron Microscopy\/Automated Image Analysis\u003cbr\u003e1.6.3 Microdensitometry and 3D-TEM\/Electron Tomography\u003cbr\u003eAcknowledgements\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2 Intelligent Tyres\u003c\/strong\u003e\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Features of the Intelligent Tyre\u003cbr\u003e2.2.1 Identification and Memory\u003cbr\u003e2.2.2 Temperature\u003cbr\u003e2.2.3 Inflation Pressure\u003cbr\u003e2.2.4 Cornering Forces\u003cbr\u003e2.2.5 Tyre Mileage\u003cbr\u003e2.2.6 Treadwear\u003cbr\u003e2.3 Historical Perspective\u003cbr\u003e2.3.1 Tyres\u003cbr\u003e2.3.2 Competing Products - Wheel-based Systems\u003cbr\u003e2.3.3 The TREAD Act of 2000\u003cbr\u003e2.3.4 Outlook for Intelligent Tyres\u003cbr\u003e2.4 Design of the Intelligent Tyre System\u003cbr\u003e2.4.1 Tyre\u003cbr\u003e2.4.2 Electronics\u003cbr\u003e2.4.3 Signal from Tyre\u003cbr\u003e2.4.4 Readers\u003cbr\u003e2.5 Standards\u003cbr\u003e2.6 Summary\u003cbr\u003eAcknowledgement\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3 Silica-Filled Rubber Compounds\u003c\/strong\u003e\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Characteristics of High-Dispersion Silicas\u003cbr\u003e3.2.1 Various Classes of Silicas: Pyrogenic versus Precipitated, and their Production\u003cbr\u003e3.2.2 Properties of Highly Dispersible Silicas\u003cbr\u003e3.2.3 Compatibility Aspects\u003cbr\u003e3.3 Coupling Agents\u003cbr\u003e3.3.1 Types of Commonly used Coupling Agents\u003cbr\u003e3.3.2 Reactions Between Silica, Silane Coupling Agent and Rubber Polymer\u003cbr\u003e3.3.3 Kinetics\u003cbr\u003e3.3.4 Alternative Coupling Agents\u003cbr\u003e3.4 Characterisation Methods for Silica-Rubber Coupling\u003cbr\u003e3.4.1 Rubber Reinforcement by Silica versus Carbon Black\u003cbr\u003e3.4.2 The Payne Effect\u003cbr\u003e3.4.3 Hysteresis Properties: tan d at 60 °C\u003cbr\u003e3.4.4 Alternative Means to Quantify Filler-Filler and Filler-Polymer Interaction\u003cbr\u003e3.5 Mixing of Silica-Rubber Compounds\u003cbr\u003e3.5.1 Effect of TESPT on the Properties of Uncured and Cured Compounds\u003cbr\u003e3.5.2 Properties of Uncured Compounds in Relation to the Dump Temperature in the Presence of TESPT \u003cbr\u003eSilane Coupling Agent\u003cbr\u003e3.5.3 Effect of the Dump Temperature on the Tensile Properties of Cured Samples\u003cbr\u003e3.5.4 Interactions Between Time and Temperature as an Indication of Reaction Kinetics of the \u003cbr\u003eCoupling Reaction\u003cbr\u003e3.5.5 Effect of Mixer Size and Rotor Type\u003cbr\u003e3.5.6 considerations on Mixer Operation\u003cbr\u003e3.6 Conclusions\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 Fibres in the Rubber Industry\u003c\/strong\u003e\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Fibre Types and General Properties\u003cbr\u003e4.2.1 Cotton\u003cbr\u003e4.2.2 Rayon\u003cbr\u003e4.2.3 Polyamides\u003cbr\u003e4.2.4 Polyester, Poly(ethylene terephthalate) (PET)\u003cbr\u003e4.2.5 Aramid\u003cbr\u003e4.2.6 Others\u003cbr\u003e4.3 Yarn and Cord Processes\u003cbr\u003e4.3.1 Twisting\u003cbr\u003e4.3.2 Texturing\u003cbr\u003e4.4 Fibre Units\u003cbr\u003e4.4.1 Titer: Tex and Denier\u003cbr\u003e4.4.2 Tenacity and Modulus: g\/denier, N\/tex or GPa\u003cbr\u003e4.5 Adhesion\u003cbr\u003e4.5.1 Types of Adhesive Interactions\u003cbr\u003e4.6 Dipping Process\u003cbr\u003e4.6.1 Factors Influencing Adhesion in Standard Resorcinol Formaldehyde Latex (RFL) Treatment\u003cbr\u003e4.7 Alternative Dip Treatments for Polyester or Aramid\u003cbr\u003e4.8 Chemically Altering the Surface\u003cbr\u003e4.8.1 Polyester\u003cbr\u003e4.9 Plasma Treatment\u003cbr\u003e4.10 Rubber Treatment\u003cbr\u003e4.10.1 Mixing Ingredients\u003cbr\u003e4.10.2 Chemical Modification of Rubber\u003cbr\u003e4.11 Methods for Analysis\u003cbr\u003e4.11.1 Pullout Tests\u003cbr\u003e4.11.2 Peel Tests\u003cbr\u003e4.11.3 Surface Analysis\u003cbr\u003e4.12 Fibres in Tyres\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 Naval and Space Applications of Rubber\u003c\/strong\u003e\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Acoustic Applications\u003cbr\u003e5.2.1 Sonar Rubber Domes\u003cbr\u003e5.2.2 Active Sonar\u003cbr\u003e5.2.3 Insulation\u003cbr\u003e5.3 Solid Rocket Propellants\u003cbr\u003e5.4 Blast Mitigative Coatings\u003cbr\u003e5.5 Aircraft Tyres\u003cbr\u003e5.6 Airships\u003cbr\u003e5.7 Inflatable Seacraft\u003cbr\u003e5.7.1 Combat Rubber Raiding Craft\u003cbr\u003e5.7.2 Hovercraft\u003cbr\u003e5.8 Rubber Sealants\u003cbr\u003e5.9 Miscellaneous Applications\u003cbr\u003e5.9.1 Rubber Bullets\u003cbr\u003e5.9.2 Intrusion Barriers\u003cbr\u003e5.9.3 Elastomeric Torpedo Launcher\u003cbr\u003e5.9.4 Mobile Offshore Base\u003cbr\u003eAcknowledgements\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6 Advances in Fillers for the Rubber Industry\u003c\/strong\u003e\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Requirements for Fillers in Tyre Applications\u003cbr\u003e6.3 Advances in Carbon Black\u003cbr\u003e6.3.1 Chemically-Modified Carbon Blacks\u003cbr\u003e6.3.2 Inversion Carbon Blacks\u003cbr\u003e6.4 Filler Particles Containing Both Carbon Black and Silica\u003cbr\u003e6.4.1 Carbon-Silica Dual Phase Filler\u003cbr\u003e6.4.2 Silica-Coated Carbon Blacks\u003cbr\u003e6.5 Advances in Silica and Other Filler Materials\u003cbr\u003e6.5.1 New Precipitated Silica for Silicone Rubber\u003cbr\u003e6.5.2 Starch\u003cbr\u003e6.5.3 Organo-Clays\u003cbr\u003e6.6 Advanced Rubber-Filler Masterbatches\u003cbr\u003e6.6.1 Cabot Elastomer Composites\u003cbr\u003e6.6.2 Powdered Rubber\u003cbr\u003e6.7 Concluding Remarks\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7 Thermoplastic Elastomers by Dynamic Vulcanisation\u003c\/strong\u003e\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Polymer Blends\u003cbr\u003e7.3 Classification of TPE\u003cbr\u003e7.4 Dynamic Vulcanisation\u003cbr\u003e7.5 Production of TPV\u003cbr\u003e7.6 PP\/EPDM TPV\u003cbr\u003e7.6.1 Crosslinking Agents For PP\/EPDM TPV\u003cbr\u003e7.6.2 Morphology of PP\/EPDM TPV\u003cbr\u003e7.7 Rheology and Processing of TPV\u003cbr\u003e7.8 Compounding in TPV\u003cbr\u003e7.9 End Use Applications of TPV\u003cbr\u003e7.10 Concluding Remarks\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8 Polymers in Cable Application\u003c\/strong\u003e\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Broad Classification of Cables\u003cbr\u003e8.2.1 Rigid Power Cables\u003cbr\u003e8.2.2 Flexible Power and Control Cables\u003cbr\u003e8.2.3 Special Purpose Cables\u003cbr\u003e8.3 Components of Cable\u003cbr\u003e8.3.1 Conductor\u003cbr\u003e8.3.2 Insulation\u003cbr\u003e8.3.3 Significance of Different Properties on Cable Insulation Quality and Performance\u003cbr\u003e8.3.4 Chemical Resistance\u003cbr\u003e8.3.5 Selection Criteria for Insulation\u003cbr\u003e8.4 Cable Jacket (Sheath)\u003cbr\u003e8.4.1 Property Requirements of Cable Jacketing Materials\u003cbr\u003e8.4.2 Criteria for Selection of Sheaths (Cable Jacket)\u003cbr\u003e8.5 Semi Conductive Components for High Voltage Cable\u003cbr\u003e8.5.1 Property Requirements of Semi-conductive Compounds\u003cbr\u003e8.6 Different Cable Materials\u003cbr\u003e8.6.1 Polymers used in Cables as Insulation, Sheathing and Semi-conducting Materials\u003cbr\u003e8.6.2 Common Elastomers for Cables\u003cbr\u003e8.6.3 Specialty Elastomers for Cables\u003cbr\u003e8.6.4 Thermoplastic Elastomers for Cables\u003cbr\u003e8.6.5 High-Temperature Thermoplastics and Thermosets\u003cbr\u003e8.7 Different Methods of PE to XLPE Conversion\u003cbr\u003e8.7.1 Crosslinking by High-Energy Irradiation (Electron Beam)\u003cbr\u003e8.7.2 Crosslinking by the Sioplas Technique\u003cbr\u003e8.8 Different Compounding Ingredients\u003cbr\u003e8.8.1 Crosslinking Agents\u003cbr\u003e8.8.2 Metal Oxides\u003cbr\u003e8.8.3 Organic Peroxides and Other Curing Agents\u003cbr\u003e8.8.4 Accelerators\u003cbr\u003e8.8.5 Antioxidants\u003cbr\u003e8.8.6 Antiozonants\u003cbr\u003e8.8.7 Fillers\u003cbr\u003e8.8.8 Auxiliary Additives\u003cbr\u003e8.8.9 Plasticiser, Softeners, Processing Aids\u003cbr\u003e8.8.10 Coupling-agents\u003cbr\u003e8.9 Cable Manufacturing Process\u003cbr\u003e8.9.1 Basic Principles of Compounding\u003cbr\u003e8.9.2 Internal Mixing\u003cbr\u003e8.9.3 Open Mixing\u003cbr\u003e8.9.4 Application of Cable Insulation Covering\u003cbr\u003e8.9.5 Curing of Cable\u003cbr\u003e8.9.6 Dual Extrusion System\u003cbr\u003e8.9.7 Triple Extrusion System\u003cbr\u003e8.9.8 Improvement in CV Curing Techniques\u003cbr\u003e8.10 Quality Checks and Tests\u003cbr\u003e8.11 Polymers in some Specialty Cables\u003cbr\u003e8.11.1 Mining Cable\u003cbr\u003e8.11.2 Aircraft and Spacecraft Cable\u003cbr\u003e8.11.3 Nuclear Power Cables\u003cbr\u003e8.11.4 Ship Board and Marine Cables\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9 Durability of Rubber Compounds\u003c\/strong\u003e\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Oxidation and Antioxidant Chemistry\u003cbr\u003e9.2.1 Introduction\u003cbr\u003e9.2.2 Mechanism of Rubber Oxidation\u003cbr\u003e9.2.3 Stabilisation Mechanism of Antioxidants\u003cbr\u003e9.2.4 Methods of Studying the Oxidation Resistance of Rubber\u003cbr\u003e9.3 Ozone and Antiozonant Chemistry\u003cbr\u003e9.3.1 Introduction\u003cbr\u003e9.3.2 Mechanism of Ozone Attack on Elastomers\u003cbr\u003e9.3.3 Mechanism of Antiozonants\u003cbr\u003e9.4 Mechanism of Protection Against Flex Cracking\u003cbr\u003e9.5 Trends Towards Long-Lasting Antidegradants\u003cbr\u003e9.5.1 Introduction\u003cbr\u003e9.5.2 Long-Lasting Antioxidants\u003cbr\u003e9.5.3 Long-Lasting Antiozonants\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10 Radiochemical Ageing of Ethylene-Propylene-Diene \u003cbr\u003eMonomer Elastomers\u003c\/strong\u003e\u003cbr\u003eIntroduction\u003cbr\u003eRadiochemical Degradation\u003cbr\u003eUnits\u003cbr\u003eRadiation Sources\u003cbr\u003eCommercial Processes and Applications\u003cbr\u003eExperimental\u003cbr\u003eMaterials\u003cbr\u003eIrradiation\u003cbr\u003e10.1 Degradation Under Inert Atmosphere\u003cbr\u003e10.1.1 Infra Red (IR) Analysis\u003cbr\u003e10.1.2 UV-vis Analysis\u003cbr\u003e10.1.3 Evaluation of Crosslinking\u003cbr\u003e10.1.4 Mass Spectrometry Analysis\u003cbr\u003e10.1.5 Mechanism of Degradation Under an Inert Atmosphere\u003cbr\u003e10.2 Identification and Quantification of Chemical Changes in EPDM and EPR Films g-Irradiated Under Oxygen Atmosphere\u003cbr\u003e10.2.1 IR Analysis\u003cbr\u003e10.2.2 UV-vis Analysis\u003cbr\u003e10.2.3 Analysis of the Oxidation Products\u003cbr\u003e10.2.4 Gamma Irradiation in vacuo of Hydroperoxides \u003cbr\u003eFormed in EPDM Films\u003cbr\u003e10.2.5 Mass Spectrometry Analysis\u003cbr\u003e10.2.6 Evaluation of Crosslinking\u003cbr\u003e10.2.7 Post-Irradiation Analysis\u003cbr\u003e10.2.8 Conclusion\u003cbr\u003e10.3 Mechanism of Radiooxidation\u003cbr\u003e10.3.1 Formation of Hydroperoxides\u003cbr\u003e10.3.2 Recombination of Peroxy Radicals\u003cbr\u003e10.3.3 Conclusion\u003cbr\u003e10.4 Evaluation of Some Anti-Oxidants\u003cbr\u003e10.4.1 Experimental\u003cbr\u003e10.4.2 Experimental Results\u003cbr\u003e10.4.3 Conclusion\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11 Silicone Rubber\u003c\/strong\u003e\u003cbr\u003e11.1 Introduction\u003cbr\u003e11.2 Chemistry\u003cbr\u003e11.3 Manufacturing\u003cbr\u003e11.4 Three Major Classifications of Silicone Rubber\u003cbr\u003e11.5 Properties\u003cbr\u003e11.5.1 Heat Resistance Property\u003cbr\u003e11.5.2 Low-Temperature Flexibility\u003cbr\u003e11.5.3 Mechanical Properties\u003cbr\u003e11.5.4 Compression Set\u003cbr\u003e11.5.5 Oil and Solvent Resistance\u003cbr\u003e11.5.6 Steam Resistance\u003cbr\u003e11.5.7 Water Resistance\u003cbr\u003e11.5.8 Electrical Properties\u003cbr\u003e11.5.9 Bio-compatibility\u003cbr\u003e11.5.10 Permeability\u003cbr\u003e11.5.11 Damping Characteristics\u003cbr\u003e11.5.12 Surface Energy or Release Property\u003cbr\u003e11.5.13 Weathering Resistance\u003cbr\u003e11.5.14 Radiation Resistance\u003cbr\u003e11.5.15 Thermal Ablative\u003cbr\u003e11.6 Compounding\u003cbr\u003e11.6.1 Silicone Gums\u003cbr\u003e11.6.2 Reinforced Gums (Bases)\u003cbr\u003e11.6.3 Filler\u003cbr\u003e11.6.4 Softener\u003cbr\u003e11.6.5 Vulcanisation\u003cbr\u003e11.7 Processing\u003cbr\u003e11.7.1 Mixing\u003cbr\u003e11.7.2 Moulding\u003cbr\u003e11.7.3 Extrusion\u003cbr\u003e11.7.4 Oven Curing\u003cbr\u003e11.7.5 Sponge\u003cbr\u003e11.7.6 Calendering\u003cbr\u003e11.7.7 Co-moulding and Over-moulding\u003cbr\u003e11.8 Troubleshooting\u003cbr\u003e11.9 Applications\u003cbr\u003e11.9.1 Automotive Applications\u003cbr\u003e11.9.2 Aerospace Applications\u003cbr\u003e11.9.3 Electrical and Electronics\u003cbr\u003e11.9.4 Coatings\u003cbr\u003e11.9.5 Appliances\u003cbr\u003e11.9.6 Foams\u003cbr\u003e11.9.7 Medical Products\u003cbr\u003e11.9.8 Baby Care\u003cbr\u003e11.9.9 Consumer Products\u003cbr\u003eAcknowledgements\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e"}

Rubber Technologist's...

$180.00

Select options

{"id":11242226372,"title":"Rubber Technologist's Handbook, Volume 1","handle":"978-1-85957-262-7","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: S.K. De and J.R. White \u003cbr\u003eISBN 978-1-85957-262-7 \u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePublished: 2001\u003cbr\u003e\u003c\/span\u003ePages: 576\n\u003ch5\u003eSummary\u003c\/h5\u003e\nRubber components are found in almost every area of modern life. Rubber is used in cars, in shoes, in construction and is used in many other applications. \u003cbr\u003eThis book provides a foundation in rubber technology and discusses the most recent developments in the subject. The book is written by experts in their respective fields. \u003cbr\u003e\u003cbr\u003eThe fourteen chapters cover natural rubber, synthetic rubber, thermoplastic elastomers, fillers, compounding additives, mixing, engineering design, testing, tyre technology, automotive applications, footwear, rubbers in construction, the durability of rubber products and rubber recycling. \u003cbr\u003e\u003cbr\u003eThe book will serve the needs of those who are already in the rubber industry and new entrants to the field who aspire to build a career in rubber and allied areas. Materials Science students and researchers, designers and engineers should all find this handbook helpful.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction, S.K. De, and J.R. White\u003cbr\u003e2. Natural Rubber, N.M. Mathew\u003cbr\u003e3. Synthetic Elastomers, S. Datta\u003cbr\u003e4. Thermoplastic Elastomers, P. Antony and S.K. De\u003cbr\u003e5. Fillers, H. Mouri\u003cbr\u003e6. Rubber Additives - Compounding Ingredients, R.N. Datta and F.A.A. Ingham \u003cbr\u003e7. Rubber Mixing, P. Freakley \u003cbr\u003e8. Engineering with Elastomers, A. Stevenson \u003cbr\u003e9. Testing, R. Brown \u003cbr\u003e10. Trends in Tyre Technology, D.M. Dryden, J.R. Luchini and G.B. Ouyang \u003cbr\u003e11. Automotive Rubbers, J-M. Jaillet \u003cbr\u003e12. Rubber Compounding in Footwear, K. Ames \u003cbr\u003e13. Rubber in Construction, A.H. Delgado, and R.M. Paroli \u003cbr\u003e14. Durability of Engineering Rubber Products, R.P. Campion \u003cbr\u003e15. Rubber Recycling, A.I. Isayev\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nProfessor Jim White graduated from Imperial College, London with a degree in Physics in 1964 and completed a Ph.D. in Chemical Physics in the Department of Chemical Engineering at Imperial College in 1968. After one year as a Research Officer at Morganite Carbon Company and two years as a Postdoc in the Biophysics Department at Johns Hopkins University, Baltimore he moved to Queen Mary College, London as a Senior Research Assistant. He has been at the University of Newcastle upon Tyne since 1975. He was awarded the degree of DSc (Eng) by the University of London in 1994. He is Associate Editor of the Journal of Materials Science. \u003cbr\u003e\u003cbr\u003eProfessor Sadhan K De has been a Professor at the Rubber Technology Center at the Indian Institute of Technology, Kharagpur, since 1982. He was the Founding Head of the Rubber Technology Center at Indian Institute of Technology, from 1982 to 1987, and then again headed the Center from 1995-1999. Professor De was the Dean of Postgraduate studies of this Institute (IIT, Kharagpur) from 1987 to 1990. He has organised three international Rubber Conferences (1980, 1986, 1997) in India, has had over 260 research publications in International Journals and co-authored three previous books, authored several review papers and chapters in books.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:01-04:00","created_at":"2017-06-22T21:14:01-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2001","additives","book","compounding","construction","durability","elastomers","fillers","footwear","mixing","natural rubber","r-compounding","rubber","rubber formulary","synthetic","testing","thermoplastic elastomers","tyre. automotive"],"price":18000,"price_min":18000,"price_max":28000,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378392068,"title":"Soft cover","option1":"Soft cover","option2":null,"option3":null,"sku":"978-1-85957-440-9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rubber Technologist's Handbook, Volume 1 - Soft cover","public_title":"Soft cover","options":["Soft cover"],"price":18000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-440-9","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":50445119364,"title":"Hard cover","option1":"Hard cover","option2":null,"option3":null,"sku":"978-1-84735-100-5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rubber Technologist's Handbook, Volume 1 - Hard cover","public_title":"Hard cover","options":["Hard cover"],"price":28000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-84735-100-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-262-7.jpg?v=1499955346"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-262-7.jpg?v=1499955346","options":["Cover"],"media":[{"alt":null,"id":358742392925,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-262-7.jpg?v=1499955346"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-262-7.jpg?v=1499955346","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: S.K. De and J.R. White \u003cbr\u003eISBN 978-1-85957-262-7 \u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePublished: 2001\u003cbr\u003e\u003c\/span\u003ePages: 576\n\u003ch5\u003eSummary\u003c\/h5\u003e\nRubber components are found in almost every area of modern life. Rubber is used in cars, in shoes, in construction and is used in many other applications. \u003cbr\u003eThis book provides a foundation in rubber technology and discusses the most recent developments in the subject. The book is written by experts in their respective fields. \u003cbr\u003e\u003cbr\u003eThe fourteen chapters cover natural rubber, synthetic rubber, thermoplastic elastomers, fillers, compounding additives, mixing, engineering design, testing, tyre technology, automotive applications, footwear, rubbers in construction, the durability of rubber products and rubber recycling. \u003cbr\u003e\u003cbr\u003eThe book will serve the needs of those who are already in the rubber industry and new entrants to the field who aspire to build a career in rubber and allied areas. Materials Science students and researchers, designers and engineers should all find this handbook helpful.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction, S.K. De, and J.R. White\u003cbr\u003e2. Natural Rubber, N.M. Mathew\u003cbr\u003e3. Synthetic Elastomers, S. Datta\u003cbr\u003e4. Thermoplastic Elastomers, P. Antony and S.K. De\u003cbr\u003e5. Fillers, H. Mouri\u003cbr\u003e6. Rubber Additives - Compounding Ingredients, R.N. Datta and F.A.A. Ingham \u003cbr\u003e7. Rubber Mixing, P. Freakley \u003cbr\u003e8. Engineering with Elastomers, A. Stevenson \u003cbr\u003e9. Testing, R. Brown \u003cbr\u003e10. Trends in Tyre Technology, D.M. Dryden, J.R. Luchini and G.B. Ouyang \u003cbr\u003e11. Automotive Rubbers, J-M. Jaillet \u003cbr\u003e12. Rubber Compounding in Footwear, K. Ames \u003cbr\u003e13. Rubber in Construction, A.H. Delgado, and R.M. Paroli \u003cbr\u003e14. Durability of Engineering Rubber Products, R.P. Campion \u003cbr\u003e15. Rubber Recycling, A.I. Isayev\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nProfessor Jim White graduated from Imperial College, London with a degree in Physics in 1964 and completed a Ph.D. in Chemical Physics in the Department of Chemical Engineering at Imperial College in 1968. After one year as a Research Officer at Morganite Carbon Company and two years as a Postdoc in the Biophysics Department at Johns Hopkins University, Baltimore he moved to Queen Mary College, London as a Senior Research Assistant. He has been at the University of Newcastle upon Tyne since 1975. He was awarded the degree of DSc (Eng) by the University of London in 1994. He is Associate Editor of the Journal of Materials Science. \u003cbr\u003e\u003cbr\u003eProfessor Sadhan K De has been a Professor at the Rubber Technology Center at the Indian Institute of Technology, Kharagpur, since 1982. He was the Founding Head of the Rubber Technology Center at Indian Institute of Technology, from 1982 to 1987, and then again headed the Center from 1995-1999. Professor De was the Dean of Postgraduate studies of this Institute (IIT, Kharagpur) from 1987 to 1990. He has organised three international Rubber Conferences (1980, 1986, 1997) in India, has had over 260 research publications in International Journals and co-authored three previous books, authored several review papers and chapters in books.\u003cbr\u003e\u003cbr\u003e"}

RubberChem 2008

$140.00

{"id":11242236804,"title":"RubberChem 2008","handle":"978-1-8473-5077-0","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Rapra \u003cbr\u003eISBN 978-1-8473-5077-0 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003ePrague, Czech Republic, 3-4 December 2008\u003c\/p\u003e\n\u003cp\u003e20 Pages\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe sixth international conference took place in December 2008, it ensured all who atteneded were kept up to date with the new regulations, applications and, of course, the ever changing composition of competitive products. \u003cbr\u003e\u003cbr\u003eThe rubber industry continues to face the ongoing challenges of cost-down pressures from the automotive industry, low-price competition from suppliers in China and Eastern Europe and an array of environmental issues.\u003cbr\u003e\u003cbr\u003eThe conference proceedings are now availabe for general release, all 20 papers presented at this conference are featured ...\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003eSESSION 1 THE BUSINESS ENVIRONMENT AND LEGISLATION\u003cbr\u003ePaper 1\u003c\/strong\u003e Outlook for rubber chemicals: current conditions and future prospects\u003cbr\u003ePaul Ita, Notch Consulting Group, USA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 2\u003c\/strong\u003e Impact of REACH on company and sector product stewardship efforts - some predictions for the future\u003cbr\u003eUrsula Schliessner, McKenna Long \u0026amp; Aldridge LLP, Belgium \u003cbr\u003eSESSION 2 FILLERS\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 3\u003c\/strong\u003e Carbon nanotubes\/silicone elastomer nanocomposites: multi-functional and high performance products; review and trends of their applications \u003cbr\u003eMichael Claes, Daniel Bonduel \u0026amp; Frédéric Luizi, Nanocyl SA, Belgium; Alexandre Beigbeder \u0026amp; Philippe Dubois, Université of Mons-Hainaut UMH, Belgium\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 4\u003c\/strong\u003e High performance silicas in the tire industry: sustainable mobility interest - wide specific surface area range interest\u003cbr\u003eLaurent Guy, Rhodia, France\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 5\u003c\/strong\u003e Carbon black fundamental properties and their effect on elastomer performance\u003cbr\u003eDr Joe Hallett, Columbian Chemicals Company, UK\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 6\u003c\/strong\u003e Novel electrical conductive material based on natural rubber: preparation \u0026amp; characterisation\u003cbr\u003eK C Yong \u0026amp; Md Aris Ahmad, Rubber Research Institute of Malaysia, Malaysia; P J S Foot \u0026amp; H Morgan, Kingston University, UK; S Cook \u0026amp; A J Tinker, Tun Abdul Razak Research Centre, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSESSION 3 VULCANISATION \u0026amp; CURE SYSTEMS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 7\u003c\/strong\u003e How process aids help\u003cbr\u003eMario Kuschnerus \u0026amp; Colin Clarke, Schill \u0026amp; Seilacher 'Struktol' AG, Germany\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 8\u003c\/strong\u003e Improved processing stabilizer systems for rubber compounding\u003cbr\u003eDr Ing André le Gal \u0026amp; Eva Peregi, CIBA Inc, Switzerland\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 9 \u003c\/strong\u003eActivated curing systems for IIR, CR and ECO\u003cbr\u003eDr Andreas Schröder, C Bergmann, D Hoff \u0026amp; M Säwe, Rhein Chemie Rheinau GmbH, Germany\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 10 \u003c\/strong\u003eThe effect of special chemicals on the aging resistance behavior of NR based tyre tread compounds\u003cbr\u003eProf Dipak Khastgir, P Sachdeva, IIT Kharagpur, India; S Dasgupta, S Bhattacharya \u0026amp; R Mukhopadhyay, J K Tyres Ltd, India\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSESSION 4 POLYMERS \u0026amp; COMPOUNDING\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 11\u003c\/strong\u003e Compounding of silica filled rubber in a twin-screw extruder\u003cbr\u003eDipl-Ing Hannah Köppen, Prof Dr-Ing, Dr-Ing Eh Walter Michaeli \u0026amp; Edmund Haberstroh, Institute of Plastics Processing (IKV) at RWTH Aachen University, Germany\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 12\u003c\/strong\u003e High and very high molecular weight EPDM polymers with 2-VINYL-5-NORBORNENE as third monomer\u003cbr\u003eChris Twigg, Michiel Dees \u0026amp; Herman Dikland, DSM Elastomers, The Netherlands; Martin van Duin, DSM Research, The Netherlands\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 13\u003c\/strong\u003e A futuristic material for improving tire performance: addressing rolling resistance, durability and wear characteristics\u003cbr\u003eDr Nico Huntink, Rabin Datta, Vincent Siebes, Bas Pierik \u0026amp; Peter de Lange, Teijin Twaron BV, The Netherlands\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 14\u003c\/strong\u003e Extrusion of physically foamed rubber profiles\u003cbr\u003eKira Epping \u0026amp; Prof Dr-Ing, Dr-Ing Eh Walter Michaeli, Institute of Plastics Processing (IKV) at RWTH Aachen University, Germany\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e SESSION 5 TESTING\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 15 \u003c\/strong\u003eTesting perfluoroelastomers for oil field applications\u003cbr\u003eLillian Guo, Paul McElfresh \u0026amp; Jim Fraser, Baker Hughes Inc, USA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 16 \u003c\/strong\u003eAccelerated test of thermoplastic elastomers under multiaxial dynamic load regarding the lifetime\u003cbr\u003eAndreas Schobel \u0026amp; Prof Dr-Ing, Dr-Ing Eh Walter Michaeli, Institute of Plastics Processing (IKV) at RWTH Aachen University, Germany\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 17 \u003c\/strong\u003eInfluence of nature and type of flaw on the properties of a natural rubber compound\u003cbr\u003eDr Frederick E Ngolemasango, Chris O'Connor \u0026amp; John Manley, Smithers Rapra Technology Ltd, UK; Martyn Bennett, Artis, UK; Jane Clarke, Loughborough University, UK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e SESSION 6 APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 18 \u003c\/strong\u003eExploring novel ways to utilise recycled tyre rubber\u003cbr\u003eGary Crutchley \u0026amp; John Manley, Smithers Rapra Technology Ltd, UK\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 19\u003c\/strong\u003e Revulcanisation - excellent, easy and cheap method for recycling worn-out rubber\u003cbr\u003eStanislaw Pasynkiewicz, Ewa Kowalska \u0026amp; Magdalena Zubrowska, Industrial Chemistry Research Institute, Poland\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 20 \u003c\/strong\u003eEffect of ageing on the fracture properties of a natural rubber engine mount compound\u003cbr\u003eDr Frederick E Ngolemasango, Chris O'Connor \u0026amp; John Manley, Smithers Rapra Technology Ltd, UK; Jane Clarke, Loughborough University, UK\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:33-04:00","created_at":"2017-06-22T21:14:33-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2008","book","carbon black","carbon nanotubes","compounding","Environment","r-compounding","REACH","rubber","rubber formulary","silicas","silicone"],"price":14000,"price_min":14000,"price_max":14000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378423684,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"RubberChem 2008","public_title":null,"options":["Default Title"],"price":14000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-8473-5077-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-8473-5077-0.jpg?v=1499726239"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-8473-5077-0.jpg?v=1499726239","options":["Title"],"media":[{"alt":null,"id":358742917213,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-8473-5077-0.jpg?v=1499726239"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-8473-5077-0.jpg?v=1499726239","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Rapra \u003cbr\u003eISBN 978-1-8473-5077-0 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003ePrague, Czech Republic, 3-4 December 2008\u003c\/p\u003e\n\u003cp\u003e20 Pages\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe sixth international conference took place in December 2008, it ensured all who atteneded were kept up to date with the new regulations, applications and, of course, the ever changing composition of competitive products. \u003cbr\u003e\u003cbr\u003eThe rubber industry continues to face the ongoing challenges of cost-down pressures from the automotive industry, low-price competition from suppliers in China and Eastern Europe and an array of environmental issues.\u003cbr\u003e\u003cbr\u003eThe conference proceedings are now availabe for general release, all 20 papers presented at this conference are featured ...\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003eSESSION 1 THE BUSINESS ENVIRONMENT AND LEGISLATION\u003cbr\u003ePaper 1\u003c\/strong\u003e Outlook for rubber chemicals: current conditions and future prospects\u003cbr\u003ePaul Ita, Notch Consulting Group, USA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 2\u003c\/strong\u003e Impact of REACH on company and sector product stewardship efforts - some predictions for the future\u003cbr\u003eUrsula Schliessner, McKenna Long \u0026amp; Aldridge LLP, Belgium \u003cbr\u003eSESSION 2 FILLERS\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 3\u003c\/strong\u003e Carbon nanotubes\/silicone elastomer nanocomposites: multi-functional and high performance products; review and trends of their applications \u003cbr\u003eMichael Claes, Daniel Bonduel \u0026amp; Frédéric Luizi, Nanocyl SA, Belgium; Alexandre Beigbeder \u0026amp; Philippe Dubois, Université of Mons-Hainaut UMH, Belgium\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 4\u003c\/strong\u003e High performance silicas in the tire industry: sustainable mobility interest - wide specific surface area range interest\u003cbr\u003eLaurent Guy, Rhodia, France\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 5\u003c\/strong\u003e Carbon black fundamental properties and their effect on elastomer performance\u003cbr\u003eDr Joe Hallett, Columbian Chemicals Company, UK\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 6\u003c\/strong\u003e Novel electrical conductive material based on natural rubber: preparation \u0026amp; characterisation\u003cbr\u003eK C Yong \u0026amp; Md Aris Ahmad, Rubber Research Institute of Malaysia, Malaysia; P J S Foot \u0026amp; H Morgan, Kingston University, UK; S Cook \u0026amp; A J Tinker, Tun Abdul Razak Research Centre, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSESSION 3 VULCANISATION \u0026amp; CURE SYSTEMS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 7\u003c\/strong\u003e How process aids help\u003cbr\u003eMario Kuschnerus \u0026amp; Colin Clarke, Schill \u0026amp; Seilacher 'Struktol' AG, Germany\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 8\u003c\/strong\u003e Improved processing stabilizer systems for rubber compounding\u003cbr\u003eDr Ing André le Gal \u0026amp; Eva Peregi, CIBA Inc, Switzerland\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 9 \u003c\/strong\u003eActivated curing systems for IIR, CR and ECO\u003cbr\u003eDr Andreas Schröder, C Bergmann, D Hoff \u0026amp; M Säwe, Rhein Chemie Rheinau GmbH, Germany\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 10 \u003c\/strong\u003eThe effect of special chemicals on the aging resistance behavior of NR based tyre tread compounds\u003cbr\u003eProf Dipak Khastgir, P Sachdeva, IIT Kharagpur, India; S Dasgupta, S Bhattacharya \u0026amp; R Mukhopadhyay, J K Tyres Ltd, India\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSESSION 4 POLYMERS \u0026amp; COMPOUNDING\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 11\u003c\/strong\u003e Compounding of silica filled rubber in a twin-screw extruder\u003cbr\u003eDipl-Ing Hannah Köppen, Prof Dr-Ing, Dr-Ing Eh Walter Michaeli \u0026amp; Edmund Haberstroh, Institute of Plastics Processing (IKV) at RWTH Aachen University, Germany\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 12\u003c\/strong\u003e High and very high molecular weight EPDM polymers with 2-VINYL-5-NORBORNENE as third monomer\u003cbr\u003eChris Twigg, Michiel Dees \u0026amp; Herman Dikland, DSM Elastomers, The Netherlands; Martin van Duin, DSM Research, The Netherlands\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 13\u003c\/strong\u003e A futuristic material for improving tire performance: addressing rolling resistance, durability and wear characteristics\u003cbr\u003eDr Nico Huntink, Rabin Datta, Vincent Siebes, Bas Pierik \u0026amp; Peter de Lange, Teijin Twaron BV, The Netherlands\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 14\u003c\/strong\u003e Extrusion of physically foamed rubber profiles\u003cbr\u003eKira Epping \u0026amp; Prof Dr-Ing, Dr-Ing Eh Walter Michaeli, Institute of Plastics Processing (IKV) at RWTH Aachen University, Germany\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e SESSION 5 TESTING\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePaper 15 \u003c\/strong\u003eTesting perfluoroelastomers for oil field applications\u003cbr\u003eLillian Guo, Paul McElfresh \u0026amp; Jim Fraser, Baker Hughes Inc, USA\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 16 \u003c\/strong\u003eAccelerated test of thermoplastic elastomers under multiaxial dynamic load regarding the lifetime\u003cbr\u003eAndreas Schobel \u0026amp; Prof Dr-Ing, Dr-Ing Eh Walter Michaeli, Institute of Plastics Processing (IKV) at RWTH Aachen University, Germany\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 17 \u003c\/strong\u003eInfluence of nature and type of flaw on the properties of a natural rubber compound\u003cbr\u003eDr Frederick E Ngolemasango, Chris O'Connor \u0026amp; John Manley, Smithers Rapra Technology Ltd, UK; Martyn Bennett, Artis, UK; Jane Clarke, Loughborough University, UK\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e SESSION 6 APPLICATIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 18 \u003c\/strong\u003eExploring novel ways to utilise recycled tyre rubber\u003cbr\u003eGary Crutchley \u0026amp; John Manley, Smithers Rapra Technology Ltd, UK\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePaper 19\u003c\/strong\u003e Revulcanisation - excellent, easy and cheap method for recycling worn-out rubber\u003cbr\u003eStanislaw Pasynkiewicz, Ewa Kowalska \u0026amp; Magdalena Zubrowska, Industrial Chemistry Research Institute, Poland\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Paper 20 \u003c\/strong\u003eEffect of ageing on the fracture properties of a natural rubber engine mount compound\u003cbr\u003eDr Frederick E Ngolemasango, Chris O'Connor \u0026amp; John Manley, Smithers Rapra Technology Ltd, UK; Jane Clarke, Loughborough University, UK\u003cbr\u003e\u003cbr\u003e"}

Compounding Precipitat...

Engineering Elastomers...

Mixing of Rubber, Clas...

Natural Ageing of Rubb...

Rubber Technologist's ...

Rubber Technologist'­s...

RubberChem 2008

Rubber Technologist's...