Advanced ESR Methods in Polymer Research
This one-of-a-kind book introduces the fundamentals of ESR to polymer scientists while focusing on the significance of recently advanced ESR methods for polymeric systems. The "Fundamentals" section provides information on ESR spectra, experimental techniques, and data analysis. The "Applications" section discusses such exciting recent developments as ESR spectroscopy in the study of polymeric membranes used in fuel cell applications, UV- and thermal degradation of polymeric materials, as well as self-assembling and dynamics in ion-containing polymers and other topics of interest to academics, graduate students, and professionals in industrial R & D and applications laboratories.
Preface.
The Editor.
Contributors.
Dedication.
PART I: ESR FUNDAMENTALS.
Chapter 1. Continuous-Wave and Pulsed ESR Methods (Gunnar Jeschke and Shulamith Schlick).
Chapter 2. Double Resonance ESR Methods (Gunnar Jeschke).
Chapter 3. Calculating Slow-Motion ESR Spectra of Spin-Labeled Polymers (Keith A. Earle and David E. Budil).
Chapter 4. ESR Imaging (Shulamith Schlick).
PART II: ESR APPLICATIONS.
Chapter 5. ESR Study of Radicals in Conventional Radical Polymerization Using Radical Precursors Prepared by Atom Transfer Radical Polymerization (Atsushi Kajiwara and Krzysztof Matyjaszewski).
Chapter 6. Local Dynamics of Polymers in Solution by Spin-Label ESR (Jan Pilař).
Chapter 7. Site-Specific Information on Macromolecular Materials by Combining CW and Pulsed ESR on Spin Probes (Gunnar Jeschke).
Chapter 8. ESR Methods for Assessing the Stability of Polymer Membranes Used in Fuel Cells (Emil Roduner and Shulamith Schlick).
Chapter 9. Spatially Resolved Degradation in Heterophasic Polymers From 1D and 2D Spectral-Spatial ESR Imaging Experiments (Shulamith Schlick and Krzysztof Kruczala).
Chapter 10. ESR Studies of Photooxidation and Stabilization of Polymer Coatings (David R. Bauer and John L. Gerlock).
Chapter 11. Characterization of Dendrimer Structures by ESR Techniques (M. Francesca Ottaviani and Nicholas J. Turro).
Chapter 12. High Field ESR Spectroscopy of Conductive Polymers (Victor I. Krinichnyi).
Index.
SHULAMITH SCHLICK, DSc, is a Professor of Physical and Polymer Chemistry in the Department of Chemistry and Biochemistry, University of Detroit Mercy. One of the foremost authorities in the field of polymer research, and the editor of one previous book, Dr. Schlick has held visiting professorships and appointments worldwide and has authored over 200 scientific articles and book chapters.
Related Products
Weathering. The Testin...
$350.00
{"id":8325757829277,"title":"Weathering. The Testing Manual","handle":"weathering-the-testing-manual","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN \u003cspan style=\"font-size: 11.0pt; line-height: 107%; font-family: 'Calibri',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;\" data-mce-style=\"font-size: 11.0pt; line-height: 107%; font-family: 'Calibri',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;\"\u003e978-1-77467-064-4\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: Jan 2025\u003c\/span\u003e\u003cbr\u003ePages: 216+x\u003cbr\u003eFigures: 47\u003cbr\u003eTables: 75\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eA weathering testing manual provides guidelines and procedures for conducting weathering tests on various materials and products to simulate the effects of exposure. The methods of weathering, which are discussed in Weathering. The Testing Manual, are based on requirements of ASTM, ISO, BS, Ford, GM, IEC, IEEE, MIL PV, SAE, UL, and VDA standards. These tests are particularly important for industries such as automotive, construction, coatings, electrical insulating materials, fibers, firestop materials, gaskets, geotextiles, geomembranes, glazing, inkjet inks, laminated glass, marine products, metals, paper, plastics, photovoltaic modules, pipes, printed electronic devices, roofing, rubber, sealants, solar collectors, switches,\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003etextiles, thermal insulation, tubing, waterproofing, wire \u0026amp; cable, and wood.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Weathering. The Testing Manual contains detailed information on the methods used, their differences, parameter settings, and hardware that is commercially available for performing the tests. It also includes information on sample preparation, evaluation methods, frequency of data collection, data analysis and interpretation, and reporting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eResults of testing, which are available in open literature are compared with requirements of standards for different products.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis book will be published at the same time as the 7th Edition of the Handbook of Material Weathering and the Encyclopedia of Polymer Degradation. Each book has a different purpose. Handbook of Material Weathering is the monographic source of knowledge on various aspects of weathering, which has been reporting achievements in this field for the last 35 years. Weathering. The Testing Manual, as the above outline suggests, provides knowledge on testing of currently produced major commercial products. The purpose of Encyclopedia of Polymer Degradation is to outline the limitations and challenges of presently conducted weathering studies to formulate needs and directions for transition from present comparative evaluation to knowledge-based utilization of existing resources, the book aims to facilitate more effective prevention of waste and environmental pollution caused by material failures, partially caused by incomplete understanding of their properties and limitations.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe three books together are powerful tools for chemists, chemical engineers, legislators, environmental chemists, university teachers, and students providing the most comprehensive knowledge on material weathering ever assembled.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction\u003cbr\u003e2 Conditions of Outdoor Exposures\u003cbr\u003e2.1 Radiation\u003cbr\u003e2.2 Temperature\u003cbr\u003e2.3 Moisture and rain\u003cbr\u003e2.4 Oxygen and its forms\u003cbr\u003e2.5 Pollutant gases in the air (outdoor and indoor)\u003cbr\u003e2.6 Particulate materials and soot\u003cbr\u003e2.7 Stress\u003cbr\u003e2.8 Biological substances and colonization\u003cbr\u003e3 Measurements in Weathering Environments\u003cbr\u003e3.1 Radiation\u003cbr\u003e3.2 Sunshine duration\u003cbr\u003e3.3 Temperature \u003cbr\u003e3.4 Relative humidity\u003cbr\u003e3.5 Time of wetness\u003cbr\u003e3.6 Rain\u003cbr\u003e3.7 Pollutants\u003cbr\u003e3.7.1 Carbon dioxide \u003cbr\u003e3.7.2 Carbon monoxide\u003cbr\u003e3.7.3 Sulfur dioxide and acid rain\u003cbr\u003e3.7.4 Nitrogen oxides\u003cbr\u003e3.7.5 Ozone\u003cbr\u003e3.7.6 Particles and soot\u003cbr\u003e4 Methods of Outdoor Exposure\u003cbr\u003e4.1 Locations and their climatic peculiarities\u003cbr\u003e4.2 Preparation of the site for exposure\u003cbr\u003e4.3 Preparation of samples for exposure\u003cbr\u003e4.4 Methods of exposure according to standards\u003cbr\u003e5 Laboratory Exposures\u003cbr\u003e5.1 Radiation sources and their comparison with global spectral irradiance\u003cbr\u003e5.1.1 Radiation wavelength \u003cbr\u003e5.1.2 Irradiance\u003cbr\u003e5.2 Temperature control \u003cbr\u003e5.3 Humidity and rain control and simulation \u003cbr\u003e5.4 Other simulated parameters of exposure\u003cbr\u003e5.5 Reference materials\u003c\/p\u003e\n\u003cp\u003e6 Standards on Weathering Parameters\u003cbr\u003e6.1 Acceleration in laboratory weathering\u003cbr\u003e6.2 Activation energy\u003cbr\u003e6.3 Activation spectrum\u003cbr\u003e6.4 Global spectral irradiance\u003cbr\u003e6.5 Marine environments\u003cbr\u003e6.6 Ozone in the atmosphere and indoors\u003cbr\u003e7 Testing Methods of Products (for each product group standardized methods are discussed and compared and examples of durability are given based on available literature)\u003cbr\u003e7.1 Adhesives\u003cbr\u003e7.2 Architectural coatings\u003cbr\u003e7.3 Artist pencils\u003cbr\u003e7.4 Automotive coatings and interior\u003cbr\u003e7.5 Bituminous coatings and materials\u003cbr\u003e7.6 Coated hardboard\u003cbr\u003e7.7 Cosmetics\u003cbr\u003e7.8 Cover materials for solar collectors\u003cbr\u003e7.9 Electrical insulating materials\u003cbr\u003e7.10 Fibers\u003cbr\u003e7.11 Firestop materials\u003cbr\u003e7.12 Gaskets\u003cbr\u003e7.13 Geosynthetics\u003cbr\u003e7.14 Glazing\u003cbr\u003e7.15 Hoses\u003cbr\u003e7.16 Inkjet inks\u003cbr\u003e7.17 Laminated glass\u003cbr\u003e7.18 Metals\u003cbr\u003e7.19 Optics and photonics\u003cbr\u003e7.20 Ozone testing\u003cbr\u003e7.21 Paints and coatings\u003cbr\u003e7.22 Polyethylene and polypropylene\u003cbr\u003e7.23 Polyethylene crosslinked\u003cbr\u003e7.24 Photodegradable plastics\u003cbr\u003e7.25 Photovoltaic modules\u003cbr\u003e7.26 Pipeline coatings\u003cbr\u003e7.27 Pipes\u003cbr\u003e7.28 Plastics\u003cbr\u003e7.29 Polish applied to painted panel\u003cbr\u003e7.30 Polymer degradation\u003cbr\u003e7.31 Polymeric films\u003cbr\u003e7.32 Pressure-sensitive tapes\u003cbr\u003e7.33 Printed electronic devices and switches\u003cbr\u003e7.34 Prints\u003cbr\u003e7.35 Road vehicles\u003cbr\u003e7.36 Roofing and waterproofing\u003cbr\u003e7.37 Rubber\u003cbr\u003e7.38 Rubber seals used in collectors\u003cbr\u003e7.39 Sealants\u003cbr\u003e7.40 Solid materials (rocks)\u003cbr\u003e7.41 Surgical implants\u003cbr\u003e7.42 Textiles\u003cbr\u003e7.43 Thermal insulation\u003cbr\u003e7.44 Thermoplastic elastomers\u003cbr\u003e7.45 Transportation coatings\u003cbr\u003e7.46 Tubing\u003cbr\u003e7.47 Wood\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-12T09:47:56-04:00","created_at":"2024-06-12T09:43:36-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2025","additive","additives","adhesion","best","book","filler","fillers","methods of weathering","new","polymer","polymers","weathering"],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45528794464413,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Weathering. The Testing Manual","public_title":null,"options":["Default Title"],"price":35000,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-77467-064-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/files\/9781774670644-Case.jpg?v=1718200046"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670644-Case.jpg?v=1718200046","options":["Title"],"media":[{"alt":null,"id":29565600137373,"position":1,"preview_image":{"aspect_ratio":0.638,"height":450,"width":287,"src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670644-Case.jpg?v=1718200046"},"aspect_ratio":0.638,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670644-Case.jpg?v=1718200046","width":287}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN \u003cspan style=\"font-size: 11.0pt; line-height: 107%; font-family: 'Calibri',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;\" data-mce-style=\"font-size: 11.0pt; line-height: 107%; font-family: 'Calibri',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;\"\u003e978-1-77467-064-4\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: Jan 2025\u003c\/span\u003e\u003cbr\u003ePages: 216+x\u003cbr\u003eFigures: 47\u003cbr\u003eTables: 75\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eA weathering testing manual provides guidelines and procedures for conducting weathering tests on various materials and products to simulate the effects of exposure. The methods of weathering, which are discussed in Weathering. The Testing Manual, are based on requirements of ASTM, ISO, BS, Ford, GM, IEC, IEEE, MIL PV, SAE, UL, and VDA standards. These tests are particularly important for industries such as automotive, construction, coatings, electrical insulating materials, fibers, firestop materials, gaskets, geotextiles, geomembranes, glazing, inkjet inks, laminated glass, marine products, metals, paper, plastics, photovoltaic modules, pipes, printed electronic devices, roofing, rubber, sealants, solar collectors, switches,\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003etextiles, thermal insulation, tubing, waterproofing, wire \u0026amp; cable, and wood.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Weathering. The Testing Manual contains detailed information on the methods used, their differences, parameter settings, and hardware that is commercially available for performing the tests. It also includes information on sample preparation, evaluation methods, frequency of data collection, data analysis and interpretation, and reporting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eResults of testing, which are available in open literature are compared with requirements of standards for different products.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis book will be published at the same time as the 7th Edition of the Handbook of Material Weathering and the Encyclopedia of Polymer Degradation. Each book has a different purpose. Handbook of Material Weathering is the monographic source of knowledge on various aspects of weathering, which has been reporting achievements in this field for the last 35 years. Weathering. The Testing Manual, as the above outline suggests, provides knowledge on testing of currently produced major commercial products. The purpose of Encyclopedia of Polymer Degradation is to outline the limitations and challenges of presently conducted weathering studies to formulate needs and directions for transition from present comparative evaluation to knowledge-based utilization of existing resources, the book aims to facilitate more effective prevention of waste and environmental pollution caused by material failures, partially caused by incomplete understanding of their properties and limitations.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe three books together are powerful tools for chemists, chemical engineers, legislators, environmental chemists, university teachers, and students providing the most comprehensive knowledge on material weathering ever assembled.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction\u003cbr\u003e2 Conditions of Outdoor Exposures\u003cbr\u003e2.1 Radiation\u003cbr\u003e2.2 Temperature\u003cbr\u003e2.3 Moisture and rain\u003cbr\u003e2.4 Oxygen and its forms\u003cbr\u003e2.5 Pollutant gases in the air (outdoor and indoor)\u003cbr\u003e2.6 Particulate materials and soot\u003cbr\u003e2.7 Stress\u003cbr\u003e2.8 Biological substances and colonization\u003cbr\u003e3 Measurements in Weathering Environments\u003cbr\u003e3.1 Radiation\u003cbr\u003e3.2 Sunshine duration\u003cbr\u003e3.3 Temperature \u003cbr\u003e3.4 Relative humidity\u003cbr\u003e3.5 Time of wetness\u003cbr\u003e3.6 Rain\u003cbr\u003e3.7 Pollutants\u003cbr\u003e3.7.1 Carbon dioxide \u003cbr\u003e3.7.2 Carbon monoxide\u003cbr\u003e3.7.3 Sulfur dioxide and acid rain\u003cbr\u003e3.7.4 Nitrogen oxides\u003cbr\u003e3.7.5 Ozone\u003cbr\u003e3.7.6 Particles and soot\u003cbr\u003e4 Methods of Outdoor Exposure\u003cbr\u003e4.1 Locations and their climatic peculiarities\u003cbr\u003e4.2 Preparation of the site for exposure\u003cbr\u003e4.3 Preparation of samples for exposure\u003cbr\u003e4.4 Methods of exposure according to standards\u003cbr\u003e5 Laboratory Exposures\u003cbr\u003e5.1 Radiation sources and their comparison with global spectral irradiance\u003cbr\u003e5.1.1 Radiation wavelength \u003cbr\u003e5.1.2 Irradiance\u003cbr\u003e5.2 Temperature control \u003cbr\u003e5.3 Humidity and rain control and simulation \u003cbr\u003e5.4 Other simulated parameters of exposure\u003cbr\u003e5.5 Reference materials\u003c\/p\u003e\n\u003cp\u003e6 Standards on Weathering Parameters\u003cbr\u003e6.1 Acceleration in laboratory weathering\u003cbr\u003e6.2 Activation energy\u003cbr\u003e6.3 Activation spectrum\u003cbr\u003e6.4 Global spectral irradiance\u003cbr\u003e6.5 Marine environments\u003cbr\u003e6.6 Ozone in the atmosphere and indoors\u003cbr\u003e7 Testing Methods of Products (for each product group standardized methods are discussed and compared and examples of durability are given based on available literature)\u003cbr\u003e7.1 Adhesives\u003cbr\u003e7.2 Architectural coatings\u003cbr\u003e7.3 Artist pencils\u003cbr\u003e7.4 Automotive coatings and interior\u003cbr\u003e7.5 Bituminous coatings and materials\u003cbr\u003e7.6 Coated hardboard\u003cbr\u003e7.7 Cosmetics\u003cbr\u003e7.8 Cover materials for solar collectors\u003cbr\u003e7.9 Electrical insulating materials\u003cbr\u003e7.10 Fibers\u003cbr\u003e7.11 Firestop materials\u003cbr\u003e7.12 Gaskets\u003cbr\u003e7.13 Geosynthetics\u003cbr\u003e7.14 Glazing\u003cbr\u003e7.15 Hoses\u003cbr\u003e7.16 Inkjet inks\u003cbr\u003e7.17 Laminated glass\u003cbr\u003e7.18 Metals\u003cbr\u003e7.19 Optics and photonics\u003cbr\u003e7.20 Ozone testing\u003cbr\u003e7.21 Paints and coatings\u003cbr\u003e7.22 Polyethylene and polypropylene\u003cbr\u003e7.23 Polyethylene crosslinked\u003cbr\u003e7.24 Photodegradable plastics\u003cbr\u003e7.25 Photovoltaic modules\u003cbr\u003e7.26 Pipeline coatings\u003cbr\u003e7.27 Pipes\u003cbr\u003e7.28 Plastics\u003cbr\u003e7.29 Polish applied to painted panel\u003cbr\u003e7.30 Polymer degradation\u003cbr\u003e7.31 Polymeric films\u003cbr\u003e7.32 Pressure-sensitive tapes\u003cbr\u003e7.33 Printed electronic devices and switches\u003cbr\u003e7.34 Prints\u003cbr\u003e7.35 Road vehicles\u003cbr\u003e7.36 Roofing and waterproofing\u003cbr\u003e7.37 Rubber\u003cbr\u003e7.38 Rubber seals used in collectors\u003cbr\u003e7.39 Sealants\u003cbr\u003e7.40 Solid materials (rocks)\u003cbr\u003e7.41 Surgical implants\u003cbr\u003e7.42 Textiles\u003cbr\u003e7.43 Thermal insulation\u003cbr\u003e7.44 Thermoplastic elastomers\u003cbr\u003e7.45 Transportation coatings\u003cbr\u003e7.46 Tubing\u003cbr\u003e7.47 Wood\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/span\u003e\u003c\/p\u003e"}
Handbook of Material W...
$400.00
{"id":8325740429469,"title":"Handbook of Material Weathering 7th Edition","handle":"handbook-of-material-weathering-7th-edition","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e978-1-77467-058-3\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: Jan 2025\u003c\/span\u003e\u003cbr\u003ePages: 1024+x\u003cbr\u003eFigures: 830\u003cbr\u003eTables: 66\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eThe 7th edition of the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a comprehensive and systematic update of knowledge related to material weathering. It has been continuously revised and expanded to include the most recent advancements and discoveries in the field. The update is crucial because the field of material weathering has been evolving rapidly, with a substantial increase in research output in recent times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eSome key highlights of the 7th edition are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eExtensive Research: Over the last 35 years since the 1st edition, there has been a substantial increase in research in material weathering. Recently, more than 2000 new papers have been published yearly on polymer weathering, amounting to an average of about 40 new papers per week. This reflects the growing interest and importance of weathering studies in various industries and scientific communities\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eExpanding Knowledge\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The rapidly growing information required for professional use in material weathering has led to the need for additional books to accommodate essential knowledge. This indicates the increasing complexity and depth of research in the field and the need to address new challenges and applications. This is addressed by two new books that are published this year in addition to the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e, each concentrating on a separate, significant subject: \u003cb\u003eWeathering. Testing Manual\u003c\/b\u003e that concentrates on standardized and emerging test methods and \u003cb\u003eEncyclopedia of Polymer Degradation\u003c\/b\u003e that departs from the classical treatment of weathering towards chemistry-based protection of environmental impact of waste-generating, degrading materials. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eChapters and Topics\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The 7th edition of the Handbook contains 22 chapters that cover various aspects of material weathering. These chapters can be categorized into groups, such as theory (photophysics and photochemistry), stress factors (parameters of exposure, measurements, and climatic conditions), methods of weathering (laboratory degradation studies, sample preparation, etc.), and specific topics like weathering of polymers and products, the effect of additives, UV stabilizers, environmental stress cracking, and more. The table of contents below contains more details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eGlobal Reach\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is utilized in more than 100 countries, emphasizing its importance and relevance on an international scale. The book is valuable for research chemists, material scientists, manufacturers, quality controllers, and students seeking to apply their knowledge to real-world materials.\u003c\/span\u003e\u003cspan lang=\"EN-CA\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eTimely Updates\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: Access to the most recent information in the field is crucial, as older editions might contain outdated information or need more current advancements. Therefore, a new edition is prepared to ensure that readers have access to the most up-to-date and relevant information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eOverall, the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a valuable resource for professionals and researchers involved in material science, photochemistry, and related fields. It helps bridge the gap between theoretical knowledge and practical applications, aiding in developing durable and weather-resistant materials and products.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003ePreface\u003cbr\u003e1 Photophysics \u003cbr\u003e1.1 Nature of radiation \u003cbr\u003e1.2 Absorption of radiation by materials \u003cbr\u003e1.3 Fate and utilization of absorbed energy \u003cbr\u003e1.4 Radiative processes involving dimers \u003cbr\u003e1.5 Modeling and photophysical data \u003cbr\u003e2 Photochemistry \u003cbr\u003e2.1 Typical routes of photochemical reactions \u003cbr\u003e2.2 Photochemical reactivity and quantum yield \u003cbr\u003e2.3 Excitation of excited state \u003cbr\u003e2.4 Parameters of photochemical reactions \u003cbr\u003e2.5 Quenchers and photosensitizers \u003cbr\u003e3 Parameters of Exposure \u003cbr\u003e3.1 Radiation \u003cbr\u003e3.2 Temperature \u003cbr\u003e3.3 Water \u003cbr\u003e3.4 Atmosphere composition \u003cbr\u003e3.5 Pollutants \u003cbr\u003e3.6 Biological substances \u003cbr\u003e3.7 Water pollutants \u003cbr\u003e3.8 Stress \u003cbr\u003e3.9 Cooperative action of different parameters \u003cbr\u003e4 Measurements in Assessment of Weathering Conditions \u003cbr\u003e4.1 Radiation \u003cbr\u003e4.2 Sunshine duration \u003cbr\u003e4.3 Temperature \u003cbr\u003e4.4 Relative humidity \u003cbr\u003e4.5 Time of wetness \u003cbr\u003e4.6 Rain \u003cbr\u003e4.7 Pollutants \u003cbr\u003e5 Climatic Conditions \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Radiation \u003cbr\u003e5.3 Sunshine duration \u003cbr\u003e5.4 Temperature \u003cbr\u003e5.5 Precipitation \u003cbr\u003e5.6 Relative humidity \u003cbr\u003e5.7 Wetness time \u003cbr\u003e5.8 Pollutants \u003cbr\u003e5.9 Surface soiling \u003cbr\u003e6 Methods of Outdoor Exposure \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 Climatic conditions and degradation rate \u003cbr\u003e6.3 Variability of weather conditions and its impact on the strategy in outdoor exposures \u003cbr\u003e6.4 Influence of specimen properties \u003cbr\u003e6.5 Typical methods of outdoor exposure \u003cbr\u003e6.6 Other parameters of exposure \u003cbr\u003e6.7 Relevant Standards \u003cbr\u003e7 Laboratory Degradation Studies \u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Light sources \u003cbr\u003e7.3 Filters \u003cbr\u003e7.4 Radiation: delivery, monitoring, and control \u003cbr\u003e7.5 Temperature control \u003cbr\u003e7.6 Humidity control \u003cbr\u003e7.7 Specimen spraying \u003cbr\u003e7.8 Specimen racks and holders \u003cbr\u003e7.9 Weathering equipment \u003cbr\u003e7.10 Correlation between different devices \u003cbr\u003e7.11 Pollutants \u003cbr\u003e7.12 Precision of studies \u003cbr\u003e8 Weathering Cycles \u003cbr\u003e9 Sample Preparation \u003cbr\u003e10 Weathering Data Interpretation. Lifetime Prediction \u003cbr\u003e11 Artificial Weathering Versus Natural Exposure \u003cbr\u003e12 Effect of Weathering on Material Properties \u003cbr\u003e12.1 Mass loss \u003cbr\u003e12.2 Depth of degradation \u003cbr\u003e12.3 Mechanical properties \u003cbr\u003e12.4 Changes in color and optical properties \u003cbr\u003e12.5 Surface changes \u003cbr\u003e12.6 Molecular weight \u003cbr\u003e12.7 Chemical composition of surface and bulk \u003cbr\u003e12.8 Morphology and structure of surface layers \u003cbr\u003e12.9 Glass transition temperature \u003cbr\u003e12.10 Self-healing \u003cbr\u003e13 Testing Methods of Weathered Specimen \u003cbr\u003e13.1 Visual evaluation \u003cbr\u003e13.2 Microscopy \u003cbr\u003e13.3 Imaging techniques \u003cbr\u003e13.4 Gloss \u003cbr\u003e13.5 Color changes \u003cbr\u003e13.6 Visible Spectrophotometry \u003cbr\u003e13.7 UV spectrophotometry \u003cbr\u003e13.8 Infrared spectrophotometry \u003cbr\u003e13.9 Near-infrared spectroscopy \u003cbr\u003e13.10 Raman spectroscopy \u003cbr\u003e13.11 Nuclear magnetic resonance \u003cbr\u003e13.12 Electron spin resonance \u003cbr\u003e13.13 Mass spectrometry \u003cbr\u003e13.14 Positron annihilation lifetime spectroscopy \u003cbr\u003e13.15 Chemiluminescence, fluorescence, and phosphorescence \u003cbr\u003e13.16 Atomic absorption spectroscopy \u003cbr\u003e13.17 WAXS and SAXS \u003cbr\u003e13.18 X-ray photoelectron spectroscopy, XPS \u003cbr\u003e13.19 X-ray microtomography \u003cbr\u003e13.20 Mass change \u003cbr\u003e13.21 Density \u003cbr\u003e13.22 Contact angle \u003cbr\u003e13.23 Diffusion of gasses and water transport in polymers \u003cbr\u003e13.24 Electrical properties \u003cbr\u003e13.25 Ultrasonic measurements \u003cbr\u003e13.26 Thermal analysis \u003cbr\u003e13.27 Rheological properties of materials \u003cbr\u003e13.28 Other physical parameters \u003cbr\u003e13.29 Tensile strength \u003cbr\u003e13.30 Elongation \u003cbr\u003e13.31 Flexural strength \u003cbr\u003e13.32 Impact strength \u003cbr\u003e13.33 Creep and constant strain tests \u003cbr\u003e13.34 Residual stress \u003cbr\u003e13.35 Scratch and mar resistance \u003cbr\u003e13.36 Other mechanical properties \u003cbr\u003e13.37 Surface roughness \u003cbr\u003e13.38 Molecular weight \u003cbr\u003e13.39 Gas and liquid chromatography \u003cbr\u003e13.40 Titrimetry \u003cbr\u003e13.41 Dehydrochlorination rate \u003cbr\u003e13.42 Gel fraction \u003cbr\u003e13.43 Oxygen uptake \u003cbr\u003e13.44 Water absorption, porosity \u003cbr\u003e13.45 Microorganism growth test \u003cbr\u003e13.46 Environmental stress cracking resistance \u003cbr\u003e14 Data on Specific Polymers \u003cbr\u003e14.1 Acrylonitrile-butadiene-styrene, ABS \u003cbr\u003e14.2 Acrylonitrile-styrene-acrylate, ASA \u003cbr\u003e14.3 Alkyd resins \u003cbr\u003e14.4 Acrylic resins \u003cbr\u003e14.5 Cellulose \u003cbr\u003e14.6 Chitosan \u003cbr\u003e14.7 Epoxy resins \u003cbr\u003e14.8 Ethylene-propylene rubber, EPR \u003cbr\u003e14.9 Ethylene vinyl acetate copolymer, EVAc \u003cbr\u003e14.10 Ethylene propylene diene monomer, EPDM \u003cbr\u003e14.11 Fluoropolymers \u003cbr\u003e14.12 Melamine resins \u003cbr\u003e14.13 Phenoxy resins \u003cbr\u003e14.14 Polyacrylamide \u003cbr\u003e14.15 Polyacrylonitrile \u003cbr\u003e14.16 Polyamides \u003cbr\u003e14.17 Polyaniline \u003cbr\u003e14.18 Polycarbonates \u003cbr\u003e14.19 Polyesters \u003cbr\u003e14.20 Polyethylene \u003cbr\u003e14.21 Polyethylene, chlorinated \u003cbr\u003e14.22 Poly(ethylene glycol) \u003cbr\u003e14.23 Polyfluorene \u003cbr\u003e14.24 Polyimides \u003cbr\u003e14.25 Poly(lactic acid) \u003cbr\u003e14.26 Polymethylmethacrylate \u003cbr\u003e14.27 Polyoxyethylene \u003cbr\u003e14.28 Polyoxymethylene \u003cbr\u003e14.29 Poly(phenylene oxide) \u003cbr\u003e14.30 Poly(phenylene sulfide) \u003cbr\u003e14.31 Poly(-phenylene terephthalamide) \u003cbr\u003e14.32 Poly(-phenylene vinylene) \u003cbr\u003e14.33 Polypropylene \u003cbr\u003e14.34 Polystyrenes \u003cbr\u003e14.35 Polysulfones \u003cbr\u003e14.36 Polytetrafluoroethylene \u003cbr\u003e14.37 Polythiophene \u003cbr\u003e14.38 Polyurethanes \u003cbr\u003e14.39 Poly(vinyl alcohol) \u003cbr\u003e14.40 Polyvinylchloride \u003cbr\u003e14.41 Poly(vinylidene fluoride) \u003cbr\u003e14.42 Poly(vinyl methyl ether) \u003cbr\u003e14.43 Styrene-acrylonitrile copolymer \u003cbr\u003e14.44 Silicones \u003cbr\u003e14.45 Polymer blends \u003cbr\u003e14.46 Rubbers \u003cbr\u003e15 Effect of Additives on Weathering \u003cbr\u003e15.1 Fillers and reinforcing fibers \u003cbr\u003e15.2 Pigments \u003cbr\u003e15.3 Plasticizers \u003cbr\u003e15.4 Solvents and diluents \u003cbr\u003e15.5 Flame retardants \u003cbr\u003e15.6 Impact modifiers \u003cbr\u003e15.7 Thermal stabilizers \u003cbr\u003e15.8 Antioxidants \u003cbr\u003e15.9 Antimicrobial additives \u003cbr\u003e15.10 Curatives, crosslinkers, initiators \u003cbr\u003e15.11 Catalysts \u003cbr\u003e15.12 Compatibilizer \u003cbr\u003e15.12 Impurities \u003cbr\u003e15.13 Summary \u003cbr\u003e16 Weathering of Compounded Products \u003cbr\u003e16.1 Adhesives \u003cbr\u003e16.2 Aerospace \u003cbr\u003e16.3 Agriculture \u003cbr\u003e16.4 Appliances \u003cbr\u003e16.5 Automotive parts \u003cbr\u003e16.6 Automotive coatings \u003cbr\u003e16.7 Coated fabrics \u003cbr\u003e16.8 Coil-coated materials \u003cbr\u003e16.9 Composites \u003cbr\u003e16.10 Concrete \u003cbr\u003e16.11 Conservation \u003cbr\u003e16.12 Construction materials \u003cbr\u003e16.13 Cosmetics \u003cbr\u003e16.14 Dental materials \u003cbr\u003e16.15 Electronics and electrical materials \u003cbr\u003e16.16 Environmental pollutants \u003cbr\u003e16.17 Foams \u003cbr\u003e16.18 Food \u003cbr\u003e16.19 Gel coats \u003cbr\u003e16.20 Geosynthetics \u003cbr\u003e16.21 Glass and glazing materials \u003cbr\u003e16.22 Greenhouse film \u003cbr\u003e16.23 Hair \u003cbr\u003e16.24 Laminates \u003cbr\u003e16.25 Medical equipment and supplies \u003cbr\u003e16.26 Military applications \u003cbr\u003e16.27 Molded materials \u003cbr\u003e16.28 Packaging materials \u003cbr\u003e16.29 Paints and coatings \u003cbr\u003e16.30 Pavements \u003cbr\u003e16.31 Pharmaceutical products \u003cbr\u003e16.32 Pipes and tubing \u003cbr\u003e16.33 Pulp and paper \u003cbr\u003e16.34 Roofing materials \u003cbr\u003e16.35 Sealants \u003cbr\u003e16.36 Sheet \u003cbr\u003e16.37 Siding \u003cbr\u003e16.38 Solar cells and collectors \u003cbr\u003e16.39 Textiles \u003cbr\u003e16.40 Windows \u003cbr\u003e16.41 Wire and cable \u003cbr\u003e16.42 Wood \u003cbr\u003e17 Stabilization and Stabilizers \u003cbr\u003e17.1 Limiting the incoming radiation \u003cbr\u003e17.2 Deactivation of excited states and free radicals \u003cbr\u003e17.3 Elimination of singlet oxygen, peroxide decomposition, and limiting oxidative changes \u003cbr\u003e17.4 Defect removal \u003cbr\u003e17.5 Stability of UV stabilizers \u003cbr\u003e17.6 Distribution of UV absorber \u003cbr\u003e17.7 Stabilizer entrapment and interaction \u003cbr\u003e17.8 Protective coatings \u003cbr\u003e17.9 Examples of stabilization technology \u003cbr\u003e18 Biodegradation \u003cbr\u003e18.1 Biodegradation environment \u003cbr\u003e18.2 Enzymatic reactions \u003cbr\u003e18.3 Biodegradation of materials \u003cbr\u003e18.4 Biocides \u003cbr\u003e18.5 Methods of testing \u003cbr\u003e18.6 Controlled biodegradation \u003cbr\u003e19 Recycling \u003cbr\u003e19.1 Effect of degradation on recycling \u003cbr\u003e19.2 Re-stabilization of material for recycling \u003cbr\u003e19.3 Multilayer materials \u003cbr\u003e19.4 Removable paint \u003cbr\u003e19.5 Chemical recycling \u003cbr\u003e20 Environmental Stress Cracking \u003cbr\u003e20.1 Definitions \u003cbr\u003e20.2 Parameters controlling ESC \u003cbr\u003e20.3 Mechanisms of environmental stress cracking \u003cbr\u003e20.4 Kinetics of environmental stress cracking \u003cbr\u003e20.5 Effect of ESC on material durability \u003cbr\u003e20.6 Methods of testing \u003cbr\u003e21 Interrelation Between Corrosion and Weathering \u003cbr\u003e22 Weathering of Stones \u003cbr\u003eIndex \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-12T09:42:22-04:00","created_at":"2024-06-12T09:34:49-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2025","additive","additives","adhesion","best","book","filler","fillers","methods of weathering","new","polymer","polymers","weathering"],"price":40000,"price_min":40000,"price_max":40000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45528733253789,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Material Weathering 7th Edition","public_title":null,"options":["Default Title"],"price":40000,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-77467-058-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666","options":["Title"],"media":[{"alt":null,"id":29565566976157,"position":1,"preview_image":{"aspect_ratio":0.713,"height":450,"width":321,"src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666"},"aspect_ratio":0.713,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666","width":321}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e978-1-77467-058-3\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: Jan 2025\u003c\/span\u003e\u003cbr\u003ePages: 1024+x\u003cbr\u003eFigures: 830\u003cbr\u003eTables: 66\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eThe 7th edition of the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a comprehensive and systematic update of knowledge related to material weathering. It has been continuously revised and expanded to include the most recent advancements and discoveries in the field. The update is crucial because the field of material weathering has been evolving rapidly, with a substantial increase in research output in recent times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eSome key highlights of the 7th edition are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eExtensive Research: Over the last 35 years since the 1st edition, there has been a substantial increase in research in material weathering. Recently, more than 2000 new papers have been published yearly on polymer weathering, amounting to an average of about 40 new papers per week. This reflects the growing interest and importance of weathering studies in various industries and scientific communities\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eExpanding Knowledge\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The rapidly growing information required for professional use in material weathering has led to the need for additional books to accommodate essential knowledge. This indicates the increasing complexity and depth of research in the field and the need to address new challenges and applications. This is addressed by two new books that are published this year in addition to the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e, each concentrating on a separate, significant subject: \u003cb\u003eWeathering. Testing Manual\u003c\/b\u003e that concentrates on standardized and emerging test methods and \u003cb\u003eEncyclopedia of Polymer Degradation\u003c\/b\u003e that departs from the classical treatment of weathering towards chemistry-based protection of environmental impact of waste-generating, degrading materials. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eChapters and Topics\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The 7th edition of the Handbook contains 22 chapters that cover various aspects of material weathering. These chapters can be categorized into groups, such as theory (photophysics and photochemistry), stress factors (parameters of exposure, measurements, and climatic conditions), methods of weathering (laboratory degradation studies, sample preparation, etc.), and specific topics like weathering of polymers and products, the effect of additives, UV stabilizers, environmental stress cracking, and more. The table of contents below contains more details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eGlobal Reach\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is utilized in more than 100 countries, emphasizing its importance and relevance on an international scale. The book is valuable for research chemists, material scientists, manufacturers, quality controllers, and students seeking to apply their knowledge to real-world materials.\u003c\/span\u003e\u003cspan lang=\"EN-CA\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eTimely Updates\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: Access to the most recent information in the field is crucial, as older editions might contain outdated information or need more current advancements. Therefore, a new edition is prepared to ensure that readers have access to the most up-to-date and relevant information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eOverall, the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a valuable resource for professionals and researchers involved in material science, photochemistry, and related fields. It helps bridge the gap between theoretical knowledge and practical applications, aiding in developing durable and weather-resistant materials and products.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003ePreface\u003cbr\u003e1 Photophysics \u003cbr\u003e1.1 Nature of radiation \u003cbr\u003e1.2 Absorption of radiation by materials \u003cbr\u003e1.3 Fate and utilization of absorbed energy \u003cbr\u003e1.4 Radiative processes involving dimers \u003cbr\u003e1.5 Modeling and photophysical data \u003cbr\u003e2 Photochemistry \u003cbr\u003e2.1 Typical routes of photochemical reactions \u003cbr\u003e2.2 Photochemical reactivity and quantum yield \u003cbr\u003e2.3 Excitation of excited state \u003cbr\u003e2.4 Parameters of photochemical reactions \u003cbr\u003e2.5 Quenchers and photosensitizers \u003cbr\u003e3 Parameters of Exposure \u003cbr\u003e3.1 Radiation \u003cbr\u003e3.2 Temperature \u003cbr\u003e3.3 Water \u003cbr\u003e3.4 Atmosphere composition \u003cbr\u003e3.5 Pollutants \u003cbr\u003e3.6 Biological substances \u003cbr\u003e3.7 Water pollutants \u003cbr\u003e3.8 Stress \u003cbr\u003e3.9 Cooperative action of different parameters \u003cbr\u003e4 Measurements in Assessment of Weathering Conditions \u003cbr\u003e4.1 Radiation \u003cbr\u003e4.2 Sunshine duration \u003cbr\u003e4.3 Temperature \u003cbr\u003e4.4 Relative humidity \u003cbr\u003e4.5 Time of wetness \u003cbr\u003e4.6 Rain \u003cbr\u003e4.7 Pollutants \u003cbr\u003e5 Climatic Conditions \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Radiation \u003cbr\u003e5.3 Sunshine duration \u003cbr\u003e5.4 Temperature \u003cbr\u003e5.5 Precipitation \u003cbr\u003e5.6 Relative humidity \u003cbr\u003e5.7 Wetness time \u003cbr\u003e5.8 Pollutants \u003cbr\u003e5.9 Surface soiling \u003cbr\u003e6 Methods of Outdoor Exposure \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 Climatic conditions and degradation rate \u003cbr\u003e6.3 Variability of weather conditions and its impact on the strategy in outdoor exposures \u003cbr\u003e6.4 Influence of specimen properties \u003cbr\u003e6.5 Typical methods of outdoor exposure \u003cbr\u003e6.6 Other parameters of exposure \u003cbr\u003e6.7 Relevant Standards \u003cbr\u003e7 Laboratory Degradation Studies \u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Light sources \u003cbr\u003e7.3 Filters \u003cbr\u003e7.4 Radiation: delivery, monitoring, and control \u003cbr\u003e7.5 Temperature control \u003cbr\u003e7.6 Humidity control \u003cbr\u003e7.7 Specimen spraying \u003cbr\u003e7.8 Specimen racks and holders \u003cbr\u003e7.9 Weathering equipment \u003cbr\u003e7.10 Correlation between different devices \u003cbr\u003e7.11 Pollutants \u003cbr\u003e7.12 Precision of studies \u003cbr\u003e8 Weathering Cycles \u003cbr\u003e9 Sample Preparation \u003cbr\u003e10 Weathering Data Interpretation. Lifetime Prediction \u003cbr\u003e11 Artificial Weathering Versus Natural Exposure \u003cbr\u003e12 Effect of Weathering on Material Properties \u003cbr\u003e12.1 Mass loss \u003cbr\u003e12.2 Depth of degradation \u003cbr\u003e12.3 Mechanical properties \u003cbr\u003e12.4 Changes in color and optical properties \u003cbr\u003e12.5 Surface changes \u003cbr\u003e12.6 Molecular weight \u003cbr\u003e12.7 Chemical composition of surface and bulk \u003cbr\u003e12.8 Morphology and structure of surface layers \u003cbr\u003e12.9 Glass transition temperature \u003cbr\u003e12.10 Self-healing \u003cbr\u003e13 Testing Methods of Weathered Specimen \u003cbr\u003e13.1 Visual evaluation \u003cbr\u003e13.2 Microscopy \u003cbr\u003e13.3 Imaging techniques \u003cbr\u003e13.4 Gloss \u003cbr\u003e13.5 Color changes \u003cbr\u003e13.6 Visible Spectrophotometry \u003cbr\u003e13.7 UV spectrophotometry \u003cbr\u003e13.8 Infrared spectrophotometry \u003cbr\u003e13.9 Near-infrared spectroscopy \u003cbr\u003e13.10 Raman spectroscopy \u003cbr\u003e13.11 Nuclear magnetic resonance \u003cbr\u003e13.12 Electron spin resonance \u003cbr\u003e13.13 Mass spectrometry \u003cbr\u003e13.14 Positron annihilation lifetime spectroscopy \u003cbr\u003e13.15 Chemiluminescence, fluorescence, and phosphorescence \u003cbr\u003e13.16 Atomic absorption spectroscopy \u003cbr\u003e13.17 WAXS and SAXS \u003cbr\u003e13.18 X-ray photoelectron spectroscopy, XPS \u003cbr\u003e13.19 X-ray microtomography \u003cbr\u003e13.20 Mass change \u003cbr\u003e13.21 Density \u003cbr\u003e13.22 Contact angle \u003cbr\u003e13.23 Diffusion of gasses and water transport in polymers \u003cbr\u003e13.24 Electrical properties \u003cbr\u003e13.25 Ultrasonic measurements \u003cbr\u003e13.26 Thermal analysis \u003cbr\u003e13.27 Rheological properties of materials \u003cbr\u003e13.28 Other physical parameters \u003cbr\u003e13.29 Tensile strength \u003cbr\u003e13.30 Elongation \u003cbr\u003e13.31 Flexural strength \u003cbr\u003e13.32 Impact strength \u003cbr\u003e13.33 Creep and constant strain tests \u003cbr\u003e13.34 Residual stress \u003cbr\u003e13.35 Scratch and mar resistance \u003cbr\u003e13.36 Other mechanical properties \u003cbr\u003e13.37 Surface roughness \u003cbr\u003e13.38 Molecular weight \u003cbr\u003e13.39 Gas and liquid chromatography \u003cbr\u003e13.40 Titrimetry \u003cbr\u003e13.41 Dehydrochlorination rate \u003cbr\u003e13.42 Gel fraction \u003cbr\u003e13.43 Oxygen uptake \u003cbr\u003e13.44 Water absorption, porosity \u003cbr\u003e13.45 Microorganism growth test \u003cbr\u003e13.46 Environmental stress cracking resistance \u003cbr\u003e14 Data on Specific Polymers \u003cbr\u003e14.1 Acrylonitrile-butadiene-styrene, ABS \u003cbr\u003e14.2 Acrylonitrile-styrene-acrylate, ASA \u003cbr\u003e14.3 Alkyd resins \u003cbr\u003e14.4 Acrylic resins \u003cbr\u003e14.5 Cellulose \u003cbr\u003e14.6 Chitosan \u003cbr\u003e14.7 Epoxy resins \u003cbr\u003e14.8 Ethylene-propylene rubber, EPR \u003cbr\u003e14.9 Ethylene vinyl acetate copolymer, EVAc \u003cbr\u003e14.10 Ethylene propylene diene monomer, EPDM \u003cbr\u003e14.11 Fluoropolymers \u003cbr\u003e14.12 Melamine resins \u003cbr\u003e14.13 Phenoxy resins \u003cbr\u003e14.14 Polyacrylamide \u003cbr\u003e14.15 Polyacrylonitrile \u003cbr\u003e14.16 Polyamides \u003cbr\u003e14.17 Polyaniline \u003cbr\u003e14.18 Polycarbonates \u003cbr\u003e14.19 Polyesters \u003cbr\u003e14.20 Polyethylene \u003cbr\u003e14.21 Polyethylene, chlorinated \u003cbr\u003e14.22 Poly(ethylene glycol) \u003cbr\u003e14.23 Polyfluorene \u003cbr\u003e14.24 Polyimides \u003cbr\u003e14.25 Poly(lactic acid) \u003cbr\u003e14.26 Polymethylmethacrylate \u003cbr\u003e14.27 Polyoxyethylene \u003cbr\u003e14.28 Polyoxymethylene \u003cbr\u003e14.29 Poly(phenylene oxide) \u003cbr\u003e14.30 Poly(phenylene sulfide) \u003cbr\u003e14.31 Poly(-phenylene terephthalamide) \u003cbr\u003e14.32 Poly(-phenylene vinylene) \u003cbr\u003e14.33 Polypropylene \u003cbr\u003e14.34 Polystyrenes \u003cbr\u003e14.35 Polysulfones \u003cbr\u003e14.36 Polytetrafluoroethylene \u003cbr\u003e14.37 Polythiophene \u003cbr\u003e14.38 Polyurethanes \u003cbr\u003e14.39 Poly(vinyl alcohol) \u003cbr\u003e14.40 Polyvinylchloride \u003cbr\u003e14.41 Poly(vinylidene fluoride) \u003cbr\u003e14.42 Poly(vinyl methyl ether) \u003cbr\u003e14.43 Styrene-acrylonitrile copolymer \u003cbr\u003e14.44 Silicones \u003cbr\u003e14.45 Polymer blends \u003cbr\u003e14.46 Rubbers \u003cbr\u003e15 Effect of Additives on Weathering \u003cbr\u003e15.1 Fillers and reinforcing fibers \u003cbr\u003e15.2 Pigments \u003cbr\u003e15.3 Plasticizers \u003cbr\u003e15.4 Solvents and diluents \u003cbr\u003e15.5 Flame retardants \u003cbr\u003e15.6 Impact modifiers \u003cbr\u003e15.7 Thermal stabilizers \u003cbr\u003e15.8 Antioxidants \u003cbr\u003e15.9 Antimicrobial additives \u003cbr\u003e15.10 Curatives, crosslinkers, initiators \u003cbr\u003e15.11 Catalysts \u003cbr\u003e15.12 Compatibilizer \u003cbr\u003e15.12 Impurities \u003cbr\u003e15.13 Summary \u003cbr\u003e16 Weathering of Compounded Products \u003cbr\u003e16.1 Adhesives \u003cbr\u003e16.2 Aerospace \u003cbr\u003e16.3 Agriculture \u003cbr\u003e16.4 Appliances \u003cbr\u003e16.5 Automotive parts \u003cbr\u003e16.6 Automotive coatings \u003cbr\u003e16.7 Coated fabrics \u003cbr\u003e16.8 Coil-coated materials \u003cbr\u003e16.9 Composites \u003cbr\u003e16.10 Concrete \u003cbr\u003e16.11 Conservation \u003cbr\u003e16.12 Construction materials \u003cbr\u003e16.13 Cosmetics \u003cbr\u003e16.14 Dental materials \u003cbr\u003e16.15 Electronics and electrical materials \u003cbr\u003e16.16 Environmental pollutants \u003cbr\u003e16.17 Foams \u003cbr\u003e16.18 Food \u003cbr\u003e16.19 Gel coats \u003cbr\u003e16.20 Geosynthetics \u003cbr\u003e16.21 Glass and glazing materials \u003cbr\u003e16.22 Greenhouse film \u003cbr\u003e16.23 Hair \u003cbr\u003e16.24 Laminates \u003cbr\u003e16.25 Medical equipment and supplies \u003cbr\u003e16.26 Military applications \u003cbr\u003e16.27 Molded materials \u003cbr\u003e16.28 Packaging materials \u003cbr\u003e16.29 Paints and coatings \u003cbr\u003e16.30 Pavements \u003cbr\u003e16.31 Pharmaceutical products \u003cbr\u003e16.32 Pipes and tubing \u003cbr\u003e16.33 Pulp and paper \u003cbr\u003e16.34 Roofing materials \u003cbr\u003e16.35 Sealants \u003cbr\u003e16.36 Sheet \u003cbr\u003e16.37 Siding \u003cbr\u003e16.38 Solar cells and collectors \u003cbr\u003e16.39 Textiles \u003cbr\u003e16.40 Windows \u003cbr\u003e16.41 Wire and cable \u003cbr\u003e16.42 Wood \u003cbr\u003e17 Stabilization and Stabilizers \u003cbr\u003e17.1 Limiting the incoming radiation \u003cbr\u003e17.2 Deactivation of excited states and free radicals \u003cbr\u003e17.3 Elimination of singlet oxygen, peroxide decomposition, and limiting oxidative changes \u003cbr\u003e17.4 Defect removal \u003cbr\u003e17.5 Stability of UV stabilizers \u003cbr\u003e17.6 Distribution of UV absorber \u003cbr\u003e17.7 Stabilizer entrapment and interaction \u003cbr\u003e17.8 Protective coatings \u003cbr\u003e17.9 Examples of stabilization technology \u003cbr\u003e18 Biodegradation \u003cbr\u003e18.1 Biodegradation environment \u003cbr\u003e18.2 Enzymatic reactions \u003cbr\u003e18.3 Biodegradation of materials \u003cbr\u003e18.4 Biocides \u003cbr\u003e18.5 Methods of testing \u003cbr\u003e18.6 Controlled biodegradation \u003cbr\u003e19 Recycling \u003cbr\u003e19.1 Effect of degradation on recycling \u003cbr\u003e19.2 Re-stabilization of material for recycling \u003cbr\u003e19.3 Multilayer materials \u003cbr\u003e19.4 Removable paint \u003cbr\u003e19.5 Chemical recycling \u003cbr\u003e20 Environmental Stress Cracking \u003cbr\u003e20.1 Definitions \u003cbr\u003e20.2 Parameters controlling ESC \u003cbr\u003e20.3 Mechanisms of environmental stress cracking \u003cbr\u003e20.4 Kinetics of environmental stress cracking \u003cbr\u003e20.5 Effect of ESC on material durability \u003cbr\u003e20.6 Methods of testing \u003cbr\u003e21 Interrelation Between Corrosion and Weathering \u003cbr\u003e22 Weathering of Stones \u003cbr\u003eIndex \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/span\u003e\u003c\/p\u003e"}
Encyclopedia of Polyme...
$350.00
{"id":8325682987165,"title":"Encyclopedia of Polymer Degradation","handle":"encyclopedia-of-polymer-degradation","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN 978-1-77467-048-4\u003cbr\u003e\u003cbr\u003eHard copy\u003cbr\u003ePages 240+viii\u003cbr\u003ePublished: Jan 2025\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eThe Encyclopedia takes a different approach to analyzing the effects of degradants on the degradation of materials as compared to the classical methods commonly used in weathering studies. Here are the key points:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eLimitations of Typical Weathering Studies:\u003c\/strong\u003e Conventional weathering studies often take place in natural outdoor environments where weathering parameters are not controlled. This lack of control makes it difficult to separate and understand the individual effects of different degradants on the material. Moreover, exposure sites may be in locations that do not fully represent real-life performance (e.g., no exposure to certain degradants found in urban environments). The resulting sample condition after exposure depends on the combined effects of multiple degradants, and it is hard to repeat or precisely measure all these effects. Also, in many cases, samples are too contaminated to be studied by instrumental methods.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eChallenges in Laboratory Weathering Studies: \u003c\/strong\u003eWeathering studies conducted in laboratory equipment often control specific factors such as UV energy, humidity, artificial rain, and temperature during exposure. However, the studied samples are still exposed to a combination of degradants, making it challenging to isolate the partial effects of individual degradants. The typical approach involves grading damage vs. duration and analyzing composition changes vs. duration of exposure, which does not provide a complete understanding of the mechanisms and interactions among different degradants.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eImportance of Understanding Degradation Mechanisms: \u003c\/strong\u003eTo effectively use different polymeric materials, it is essential to understand the specific mechanisms caused by different degradants. This understanding permits the selection of the most resistant materials for specific applications and the development of effective stabilization strategies to protect materials against degradation. Degradation and stabilization should be described through chemical equations to identify the specific reactions involved and their sequence.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eEncyclopedia's Approach: \u003c\/strong\u003eThe book aims to compile research results for the most important and commonly used polymers. The focus is on identifying the unitary degradative chemical reactions, including the fate of products resulting from primary degradation, which can influence further degradation mechanisms and rates. Based on these data, the book proposes potential mechanisms of reactions (chemical descriptions of the sequence of events) for each degradation mode.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eTransition to Knowledge-Based Utilization:\u003c\/strong\u003e While complete answers may be difficult to provide, the book recognizes the need to start with available data. By shifting from comparative methods to knowledge-based utilization of existing resources, the book aims to facilitate more effective prevention of waste and environmental pollution caused by material failures.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIn summary, the book aims to provide a more comprehensive and mechanistic understanding of material degradation caused by various degradants, helping researchers and professionals select suitable materials and develop effective strategies to prevent degradation and environmental pollution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction. Outdoor stability of materials (life expectance)\u003cbr\u003e2 Testing according to standards. Methods of exposure\u003cbr\u003e3 Testing according to standards. Stability measures\u003cbr\u003e4 Real-life material damage. Typical examples\u003cbr\u003e5 Examples of a combination of degradants for some real materials (encountered degrading\u003cbr\u003e environments, typical polymers used for production, and examples of performance)\u003cbr\u003e5.1 Adhesives and sealants\u003cbr\u003e5.2 Aerospace\u003cbr\u003e5.3 Automotive coatings\u003cbr\u003e5.4 Composites\u003cbr\u003e5.5 Geosynthetics\u003cbr\u003e5.6 Paints and coatings\u003cbr\u003e5.7 Roofing\u003cbr\u003e5.8 Solar cells and collectors\u003cbr\u003e5.9 Textiles\u003cbr\u003e5.10 Wood\u003cbr\u003e6 Polymer degradation. Available data (important data characterizing each polymer, reactions of degradation caused by any degradant known for this particular polymer, sequence of events which is known to be part of degradation mechanism for each degradant affecting polymer, and the major results illustrating mechanisms of degradation, products of degradation, and results of testing.)\u003cbr\u003e6.1 Acrylic resins\u003cbr\u003e6.2 Cellulose \u003cbr\u003e6.3 Epoxy resins\u003cbr\u003e6.4 Ethylene-propylene diene monomer, EPDM\u003cbr\u003e6.5 Fluorinated ethylene-propylene copolymer, FEP\u003cbr\u003e6.6 Polybutadiene\u003cbr\u003e6.7 Polycarbonate\u003cbr\u003e6.8 Polydimethylsiloxane\u003cbr\u003e6.9 Polyethylene\u003cbr\u003e6.10 Poly(ethylene terephthalate)\u003cbr\u003e6.11 Poly(lactic acid)\u003cbr\u003e6.12 Polymethylmethacrylate\u003cbr\u003e6.13 Polyoxymethylene\u003cbr\u003e6.14 Polypropylene\u003cbr\u003e6.15 Polystyrene\u003cbr\u003e6.16 Polytetrafluorethylene\u003cbr\u003e6.17 Polyurethane\u003cbr\u003e6.18 Polyvinylchloride\u003cbr\u003e6.19 Poly(vinylidene chloride)\u003cbr\u003e6.20 Rubber\u003cbr\u003e7 General testing requirements\u003cbr\u003e7.1 What to test\u003cbr\u003e7.2 Methods of study of deterioration rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/p\u003e","published_at":"2024-06-12T09:31:49-04:00","created_at":"2024-06-12T09:06:23-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2025","additives","book","chromatography","extraction techniques","latex polymers","mass spectrometry","monomers","natural synthetic","new","p-testing","plasticisers","plastics","polymer","polymers","rubbers","scanning calorimetry","spectroscopy","stabilisers","testing"],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45528543592605,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Encyclopedia of Polymer Degradation","public_title":null,"options":["Default Title"],"price":35000,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-77467-048-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209","options":["Title"],"media":[{"alt":null,"id":29565439672477,"position":1,"preview_image":{"aspect_ratio":0.649,"height":450,"width":292,"src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209"},"aspect_ratio":0.649,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209","width":292}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN 978-1-77467-048-4\u003cbr\u003e\u003cbr\u003eHard copy\u003cbr\u003ePages 240+viii\u003cbr\u003ePublished: Jan 2025\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eThe Encyclopedia takes a different approach to analyzing the effects of degradants on the degradation of materials as compared to the classical methods commonly used in weathering studies. Here are the key points:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eLimitations of Typical Weathering Studies:\u003c\/strong\u003e Conventional weathering studies often take place in natural outdoor environments where weathering parameters are not controlled. This lack of control makes it difficult to separate and understand the individual effects of different degradants on the material. Moreover, exposure sites may be in locations that do not fully represent real-life performance (e.g., no exposure to certain degradants found in urban environments). The resulting sample condition after exposure depends on the combined effects of multiple degradants, and it is hard to repeat or precisely measure all these effects. Also, in many cases, samples are too contaminated to be studied by instrumental methods.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eChallenges in Laboratory Weathering Studies: \u003c\/strong\u003eWeathering studies conducted in laboratory equipment often control specific factors such as UV energy, humidity, artificial rain, and temperature during exposure. However, the studied samples are still exposed to a combination of degradants, making it challenging to isolate the partial effects of individual degradants. The typical approach involves grading damage vs. duration and analyzing composition changes vs. duration of exposure, which does not provide a complete understanding of the mechanisms and interactions among different degradants.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eImportance of Understanding Degradation Mechanisms: \u003c\/strong\u003eTo effectively use different polymeric materials, it is essential to understand the specific mechanisms caused by different degradants. This understanding permits the selection of the most resistant materials for specific applications and the development of effective stabilization strategies to protect materials against degradation. Degradation and stabilization should be described through chemical equations to identify the specific reactions involved and their sequence.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eEncyclopedia's Approach: \u003c\/strong\u003eThe book aims to compile research results for the most important and commonly used polymers. The focus is on identifying the unitary degradative chemical reactions, including the fate of products resulting from primary degradation, which can influence further degradation mechanisms and rates. Based on these data, the book proposes potential mechanisms of reactions (chemical descriptions of the sequence of events) for each degradation mode.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eTransition to Knowledge-Based Utilization:\u003c\/strong\u003e While complete answers may be difficult to provide, the book recognizes the need to start with available data. By shifting from comparative methods to knowledge-based utilization of existing resources, the book aims to facilitate more effective prevention of waste and environmental pollution caused by material failures.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIn summary, the book aims to provide a more comprehensive and mechanistic understanding of material degradation caused by various degradants, helping researchers and professionals select suitable materials and develop effective strategies to prevent degradation and environmental pollution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction. Outdoor stability of materials (life expectance)\u003cbr\u003e2 Testing according to standards. Methods of exposure\u003cbr\u003e3 Testing according to standards. Stability measures\u003cbr\u003e4 Real-life material damage. Typical examples\u003cbr\u003e5 Examples of a combination of degradants for some real materials (encountered degrading\u003cbr\u003e environments, typical polymers used for production, and examples of performance)\u003cbr\u003e5.1 Adhesives and sealants\u003cbr\u003e5.2 Aerospace\u003cbr\u003e5.3 Automotive coatings\u003cbr\u003e5.4 Composites\u003cbr\u003e5.5 Geosynthetics\u003cbr\u003e5.6 Paints and coatings\u003cbr\u003e5.7 Roofing\u003cbr\u003e5.8 Solar cells and collectors\u003cbr\u003e5.9 Textiles\u003cbr\u003e5.10 Wood\u003cbr\u003e6 Polymer degradation. Available data (important data characterizing each polymer, reactions of degradation caused by any degradant known for this particular polymer, sequence of events which is known to be part of degradation mechanism for each degradant affecting polymer, and the major results illustrating mechanisms of degradation, products of degradation, and results of testing.)\u003cbr\u003e6.1 Acrylic resins\u003cbr\u003e6.2 Cellulose \u003cbr\u003e6.3 Epoxy resins\u003cbr\u003e6.4 Ethylene-propylene diene monomer, EPDM\u003cbr\u003e6.5 Fluorinated ethylene-propylene copolymer, FEP\u003cbr\u003e6.6 Polybutadiene\u003cbr\u003e6.7 Polycarbonate\u003cbr\u003e6.8 Polydimethylsiloxane\u003cbr\u003e6.9 Polyethylene\u003cbr\u003e6.10 Poly(ethylene terephthalate)\u003cbr\u003e6.11 Poly(lactic acid)\u003cbr\u003e6.12 Polymethylmethacrylate\u003cbr\u003e6.13 Polyoxymethylene\u003cbr\u003e6.14 Polypropylene\u003cbr\u003e6.15 Polystyrene\u003cbr\u003e6.16 Polytetrafluorethylene\u003cbr\u003e6.17 Polyurethane\u003cbr\u003e6.18 Polyvinylchloride\u003cbr\u003e6.19 Poly(vinylidene chloride)\u003cbr\u003e6.20 Rubber\u003cbr\u003e7 General testing requirements\u003cbr\u003e7.1 What to test\u003cbr\u003e7.2 Methods of study of deterioration rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/p\u003e"}