Handbook of Solvents, Volume 1, Properties

Author: George Wypych, Editor
ISBN 978-1895198-64-5

Published: 2014
Pages 900

$295.00

Summary
Table of Contents

Each chapter in this volume is focused on a specific set of solvent properties which determine its choice, effect on properties of solutes and solutions, properties of different groups of solvents and the summary of their applications' effect on health and environment (given in tabulated form), swelling of solids in solvents, solvent diffusion and drying processes, nature of interaction of solvent and solute in solutions, acid-base interactions, effect of solvents on spectral and other electronic properties of solutions, effect of solvents on rheology of solution, aggregation of solutes, permeability, molecular structure, crystallinity, configuration, and conformation of dissolved high molecular weight compounds, methods of application of solvent mixtures to enhance the range of their applicability, and effect of solvents on chemical reactions and reactivity of dissolved substances. For more information see TOC.

The main emphasis in this volume is on comprehensive treatment and ease of information use. The first goal was achieved by the selection of authors who are specialists in individual areas. The second goal was achieved by targeting the intended audience, which includes readers of different specializations who need to understand solvents from various relevant views of their applications and effects. This difficult task was fully embraced by the authors, who used their deep knowledge to write about all the important details with the clarity of non-specialized language. This makes this book unique because it allows all those involved in the area of solvents to understand the disciplines involved in this complex, multi-disciplinary subject. The additional goal was to present a synthesis of existing data for immediate use but leaving specific data on individual solvents to the databook containing information on presently used solvents or its database format on CD-ROM which can handle a large amount of information with ease of retrieval.

1 INTRODUCTION
Christian Reichardt, Department of Chemistry, Philipps University, Marburg, Germany

2 FUNDAMENTAL PRINCIPLES GOVERNING SOLVENTS USE
2.1 Solvent effects on chemical systems
Estanislao Silla, Arturo Arnau and Inaki Tunon, Department of Physical Chemistry, University of Valencia, Burjassot (Valencia), Spain
2.2 Molecular design of solvents
Koichiro Nakanishi, Kurashiki Univ. Sci. & the Arts, Okayama, Japan
2.3 Basic physical and chemical properties of solvents
George Wypych, ChemTec Laboratories, Toronto, Canada

3 PRODUCTION METHODS, PROPERTIES, AND MAIN APPLICATIONS
3.1 Definitions and solvent classification
Christian Reichardt, Philipps-Universitaet, Marburg, Germany
George Wypych, ChemTec Laboratories, Toronto, Canada
3.2 Overview of methods of solvent manufacture
George Wypych, ChemTec Laboratories, Toronto, Canada
3.3 Solvent properties
George Wypych, ChemTec Laboratories, Toronto, Canada

4 GENERAL PRINCIPLES GOVERNING DISSOLUTION OF MATERIALS IN SOLVENTS
4.1 Simple solvent characteristics
Valery Yu. Senichev, Vasiliy V. Tereshatov, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
4.2 Effect of system variables on solubility
Valery Yu. Senichev, Vasiliy V. Tereshatov, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
4.3 Polar solvation dynamics: Theory and simulations
Abraham Nitzan, School of Chemistry, The Sackler Faculty of Sciences, Tel Aviv University, Tel Aviv, Israel
4.4 Methods for the measurement of solvent activity of polymer solutions
Christian Wohlfarth, Martin-Luther-University Halle-Wittenberg, Institute of Physical Chemistry, Merseburg, Germany

5 SOLUBILITY OF SELECTED SYSTEMS AND INFLUENCE OF SOLUTES
5.1 Experimental methods of evaluation and calculation of solubility parameters of polymers and solvents. Solubility parameters data
Valery Yu. Senichev, Vasiliy V. Tereshatov, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
5.2 Prediction of solubility parameter
Nobuyuki Tanaka, Department of Biological and Chemical Engineering Gunma University, Kiryu, Japan
5.3 Methods of calculation of solubility parameters of solvents and polymers
Valery Yu. Senichev, Vasiliy V. Tereshatov, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia,

6 SWELLING
6.1 Modern views on kinetics of swelling of crosslinked elastomers in solvents
E. Ya. Denisyuk, Institute of Continuous Media Mechanics; V. V. Tereshatov Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
6.2 Equilibrium swelling in binary solvents
Vasiliy V. Tereshatov, Valery Yu. Senichev, Institute of Technical Chemistry; E. Ya. Denisyuk, Institute of Continuous Media Mechanics, Ural Branch of Russian Academy of Sciences, Perm, Russia
6.3 Swelling data on crosslinked polymers in solvents
Vasiliy V. Tereshatov, Valery Yu. Senichev, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
6.4 Influence of structure on equilibrium swelling
Vasiliy V. Tereshatov, Valery Yu. Senichev, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
6.5 Effect of strain on swelling of nanostructured elastomers
Vasiliy V. Tereshatov, Valery Yu. Senichev, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia
6.6 Effect of thermodynamic parameters of polymer-solvent system on the swelling kinetics of crosslinked elastomers
Vasiliy V. Tereshatov, Valery Yu. Senichev, Institute of Technical Chemistry, Ural Branch of Russian Academy of Sciences, Perm, Russia

7 SOLVENT TRANSPORT PHENOMENA
7.1 Diffusion, swelling, and drying
George Wypych, ChemTec Laboratories, Toronto, Canada
7.2 Bubbles dynamics and boiling of polymeric solutions
Semyon Levitsky, Negev Academic College of Engineering, Israel; Zinoviy Shulman, A.V. Luikov Heat and Mass Transfer Institute, Belarus

8 MIXED SOLVENTS
8.1 The phenomenological theory of solvent effects in mixed solvent systems
Kenneth A. Connors, School of Pharmacy, University of Wisconsin, Madison, USA
8.2 Mixed solvents
Y. Y. Fialkov, V. L. Chumak, Department of Chemistry, National Technical University of Ukraine, Kiev, Ukraine

9 ACID-BASE INTERACTIONS
9.1 General concept of acid-base interactions
George Wypych, ChemTec Laboratories, Toronto, Canada
9.2 Solvent effects based on pure solvent scales
Javier Catalan, Departamento de Química Fisíca Aplicada, Universidad Autónoma de Madrid, Madrid, Spain
9.3 Acid-base equilibria in ionic solvents (ionic melts)
Victor Cherginets, Institute for Single Crystals, Kharkov, Ukraine
9.4 Acid/base properties of solvents mixtures
Tadeusz Michalowski and Augustin Asuero

10 OTHER PROPERTIES OF SOLVENTS, SOLUTIONS, AND PRODUCTS OBTAINED FROM SOLUTIONS
10.1 Rheological properties, aggregation, permeability, molecular structure, crystallinity, and other properties affected by solvents
George Wypych, ChemTec Laboratories, Toronto, Canada
10.2 Solvatochromic behavior
Wojciech Bartkowiak, Wroclaw Technical University, Poland
10.3 Solvent effect on surfactant self-assembly

11 EFFECT OF SOLVENT ON CHEMICAL REACTIONS AND REACTIVITY
11.1 Solvent effects on chemical reactivity
Wolfgang Linert, Technical University of Vienna, Institute of Inorganic Chemistry, Vienna, Austria
11.2 Solvent effects on free radical polymerization
Michelle L. Coote and Thomas P. Davis, Centre for Advanced Macromolecular Design, School of Chemical, Engineering & Industrial Chemistry, The University of New South Wales, Sydney, Australia

12 METHODS OF SOLVENT DETECTION AND TESTING
12.1 Standard methods of solvent analysis
George Wypych, ChemTec Laboratories, Toronto, Canada
12.2 Use of breath monitoring to assess exposures to volatile organic solvents
Myrto Petreas, Hazardous Materials Laboratory, Department of Toxic Substances Control, California Environmental Protection Agency, Berkeley, CA, USA
12.2.2 A simple test to determine toxicity using bacteria
James L. Botsford, Department of Biology, New Mexico State University, Las Cruces, NM, USA

Related Products

Multi-Material Injecti...

$115.00

{"id":11242214852,"title":"Multi-Material Injection Moulding","handle":"978-1-85957-327-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: V. Goodship and J.C. Love, The University of Warwick \u003cbr\u003eISBN 978-1-85957-327-3 \u003cbr\u003e\u003cbr\u003epages: 116, figures: 23, tables: 6\n\u003ch5\u003eSummary\u003c\/h5\u003e\nInjection moulding is the most important of all the commercial methods of plastics processing. Many variations have been developed and one of the rapidly expanding fields is multi-material injection moulding. This is particularly important where processors are looking to gain technological advantages over rivals by adding value to products. Whilst tooling costs can be very high, cost savings can be made by eliminating assembly steps. This review looks at the many techniques being used, from the terminology to case studies. \u003cbr\u003e\u003cbr\u003eThere are many issues involved in moulding different types of materials together. Advantages are gained in the product by combining different properties. Recyclate can be used as a core material with virgin resin skin. However, there are potential problems. Compatibility is important for interfacial adhesion. Different materials have varying rheological properties and optimal moulding conditions, which can limit material choice. This is a big area for research as there have been few studies on co-molding incompatible polymers. \u003cbr\u003e\u003cbr\u003eThe three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. \u003cbr\u003e\u003cbr\u003eMulti-component moulding can be further subdivided. Co-injection moulding involves making sequential injections into the same mould with one material as the core and one as the skin. It is also known as sandwich moulding because the core is fully encapsulated. Bi-injection moulding is the simultaneous injection of different materials through different gates. Interval injection moulding, also known as marbling, is the simultaneous injection of different materials through different gates giving limited mixing. \u003cbr\u003e\u003cbr\u003eMulti-shot moulding describes any process where distinct material shots are applied to produce the final component. This includes transfer moulding, core back moulding and rotating tool moulding. \u003cbr\u003e\u003cbr\u003eOver-moulding includes both insert moulding and lost core moulding, the latter produces hollow parts. \u003cbr\u003e\u003cbr\u003eThis review describes the basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology. It is clearly written and difficult concepts are explained with illustrations. \u003cbr\u003e\u003cbr\u003eThe abstracts from the Polymer Library include many more examples of the use of this technology, giving names of companies and organisations involved in this field.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction \u003cbr\u003e1.1 Multi-Component Moulding \u003cbr\u003e1.1.1 Co-Injection Moulding \u003cbr\u003e1.1.2 Bi-Injection Moulding \u003cbr\u003e1.1.3 Interval Injection Moulding \u003cbr\u003e1.2 Multi-Shot Moulding \u003cbr\u003e1.2.1 Transfer \u003cbr\u003e1.2.2 Core Back \u003cbr\u003e1.2.3 Rotating Tool \u003cbr\u003e1.3 Over-Moulding \u003cbr\u003e1.4 Business Trends \u003cbr\u003e2. Injection Moulding Basics \u003cbr\u003e\u003cbr\u003e2.1 Stages of Injection Moulding \u003cbr\u003e2.1.1 Plastication \u003cbr\u003e2.1.2 Mould Filling \u003cbr\u003e2.1.3 Packing and Solidification \u003cbr\u003e2.2 Differential Shrinkage and Cooling Effects \u003cbr\u003e2.3 Microstructure of Injection Mouldings \u003cbr\u003e3. Material Selection \u003cbr\u003e\u003cbr\u003e3.1 Material Bonding Properties \u003cbr\u003e3.2 General Material Properties \u003cbr\u003e4. Multi-Component Injection Moulding \u003cbr\u003e\u003cbr\u003e4.1 Co-Injection Moulding \u003cbr\u003e4.1.1 Material Selection for Co-Injection Moulding \u003cbr\u003e4.1.2 Co-Injection Moulding: Different Techniques \u003cbr\u003e4.1.3 Sequential Injection: Single Channel Technique \u003cbr\u003e4.1.4 Sequential Injection: Mono-Sandwich Technique \u003cbr\u003e4.1.5 Simultaneous Injection: Two Channel Technique \u003cbr\u003e4.1.6 Simultaneous Injection: Three Channel Technique \u003cbr\u003e4.1.7 Part Design and Tooling Requirements for Co-Injection Moulding \u003cbr\u003e4.1.8 Rheology and Mould Filling: Why and How Co-Injection Moulding Works \u003cbr\u003e4.1.9 Immiscible Materials Research in Co-Injection Moulding \u003cbr\u003e4.1.10 Co-Injection Moulding Applications - Case Studies \u003cbr\u003e4.1.11 Recycling and Legislation \u003cbr\u003e4.1.12 Discussion and Conclusions \u003cbr\u003e4.2 Bi-Injection Moulding \u003cbr\u003e4.3 Interval Injection Moulding \u003cbr\u003e5. Multi-Shot Moulding \u003cbr\u003e\u003cbr\u003e5.1 Machine Technology \u003cbr\u003e5.1.1 Injection Unit Configurations \u003cbr\u003e5.1.2 Plastication Design \u003cbr\u003e5.1.3 Machine Type \u003cbr\u003e5.2 Core Back Moulding \u003cbr\u003e5.3 Rotating Tool Moulding \u003cbr\u003e5.4 Transfer Moulding \u003cbr\u003e5.5 Multi-Shot with a Single Injection Unit \u003cbr\u003e5.6 Material Selection for Multi-Shot \u003cbr\u003e5.6.1 Material Properties \u003cbr\u003e5.6.2 Material Process Order \u003cbr\u003e5.6.3 Using Thermoset Materials \u003cbr\u003e5.6.4 Liquid Silicone Rubber (LSR) \u003cbr\u003e5.6.5 Thermoplastic Elastomers (TPEs) \u003cbr\u003e5.7 Multi-Shot Moulding Applications - Case Studies \u003cbr\u003e5.7.1 Trio Knob \u003cbr\u003e5.7.2 Stanley Screwdriver \u003cbr\u003e5.8 Limitations to Multi-Shot Moulding \u003cbr\u003e6. Over-Moulding \u003cbr\u003e\u003cbr\u003e6.1 Insert Moulding \u003cbr\u003e6.2 Lost Core Moulding \u003cbr\u003e7. The Future? \u003cbr\u003e\u003cbr\u003eAdditional References \u003cbr\u003eAbbreviations and Acronyms \u003cbr\u003eAbstracts from the Polymer Library Database \u003cbr\u003eSubject Index\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDr. Goodship is a Senior Research Fellow with 14 years experience in the industry, expertise in coinjection moulding technology and a particular interest in recycling. Jo Love is an experienced materials engineer currently working on in-mould decoration. The authors are based at the Warwick Manufacturing Group in the Advanced Technology Centre at the University of Warwick.","published_at":"2017-06-22T21:13:24-04:00","created_at":"2017-06-22T21:13:24-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","book","co-injection molding","injection moulding","insert molding","molding","mould shrinkage","multi-component moulding","multi-shot molding","multi-shot moulding","p-processing","polymer","recycling","rheology","rotating molding transfer molding","rotating moulding transfer moulding","rotational moulding"],"price":11500,"price_min":11500,"price_max":11500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378354180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Multi-Material Injection Moulding","public_title":null,"options":["Default Title"],"price":11500,"weight":1000,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-327-3.jpg?v=1499716740"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-327-3.jpg?v=1499716740","options":["Title"],"media":[{"alt":null,"id":358515671133,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-327-3.jpg?v=1499716740"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-327-3.jpg?v=1499716740","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: V. Goodship and J.C. Love, The University of Warwick \u003cbr\u003eISBN 978-1-85957-327-3 \u003cbr\u003e\u003cbr\u003epages: 116, figures: 23, tables: 6\n\u003ch5\u003eSummary\u003c\/h5\u003e\nInjection moulding is the most important of all the commercial methods of plastics processing. Many variations have been developed and one of the rapidly expanding fields is multi-material injection moulding. This is particularly important where processors are looking to gain technological advantages over rivals by adding value to products. Whilst tooling costs can be very high, cost savings can be made by eliminating assembly steps. This review looks at the many techniques being used, from the terminology to case studies. \u003cbr\u003e\u003cbr\u003eThere are many issues involved in moulding different types of materials together. Advantages are gained in the product by combining different properties. Recyclate can be used as a core material with virgin resin skin. However, there are potential problems. Compatibility is important for interfacial adhesion. Different materials have varying rheological properties and optimal moulding conditions, which can limit material choice. This is a big area for research as there have been few studies on co-molding incompatible polymers. \u003cbr\u003e\u003cbr\u003eThe three primary types of multi-material injection moulding examined are multi-component, multi-shot and over-moulding. \u003cbr\u003e\u003cbr\u003eMulti-component moulding can be further subdivided. Co-injection moulding involves making sequential injections into the same mould with one material as the core and one as the skin. It is also known as sandwich moulding because the core is fully encapsulated. Bi-injection moulding is the simultaneous injection of different materials through different gates. Interval injection moulding, also known as marbling, is the simultaneous injection of different materials through different gates giving limited mixing. \u003cbr\u003e\u003cbr\u003eMulti-shot moulding describes any process where distinct material shots are applied to produce the final component. This includes transfer moulding, core back moulding and rotating tool moulding. \u003cbr\u003e\u003cbr\u003eOver-moulding includes both insert moulding and lost core moulding, the latter produces hollow parts. \u003cbr\u003e\u003cbr\u003eThis review describes the basic types of multi-material injection moulding, the issues surrounding combining different types of polymers and examples of practical uses of this technology. It is clearly written and difficult concepts are explained with illustrations. \u003cbr\u003e\u003cbr\u003eThe abstracts from the Polymer Library include many more examples of the use of this technology, giving names of companies and organisations involved in this field.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction \u003cbr\u003e1.1 Multi-Component Moulding \u003cbr\u003e1.1.1 Co-Injection Moulding \u003cbr\u003e1.1.2 Bi-Injection Moulding \u003cbr\u003e1.1.3 Interval Injection Moulding \u003cbr\u003e1.2 Multi-Shot Moulding \u003cbr\u003e1.2.1 Transfer \u003cbr\u003e1.2.2 Core Back \u003cbr\u003e1.2.3 Rotating Tool \u003cbr\u003e1.3 Over-Moulding \u003cbr\u003e1.4 Business Trends \u003cbr\u003e2. Injection Moulding Basics \u003cbr\u003e\u003cbr\u003e2.1 Stages of Injection Moulding \u003cbr\u003e2.1.1 Plastication \u003cbr\u003e2.1.2 Mould Filling \u003cbr\u003e2.1.3 Packing and Solidification \u003cbr\u003e2.2 Differential Shrinkage and Cooling Effects \u003cbr\u003e2.3 Microstructure of Injection Mouldings \u003cbr\u003e3. Material Selection \u003cbr\u003e\u003cbr\u003e3.1 Material Bonding Properties \u003cbr\u003e3.2 General Material Properties \u003cbr\u003e4. Multi-Component Injection Moulding \u003cbr\u003e\u003cbr\u003e4.1 Co-Injection Moulding \u003cbr\u003e4.1.1 Material Selection for Co-Injection Moulding \u003cbr\u003e4.1.2 Co-Injection Moulding: Different Techniques \u003cbr\u003e4.1.3 Sequential Injection: Single Channel Technique \u003cbr\u003e4.1.4 Sequential Injection: Mono-Sandwich Technique \u003cbr\u003e4.1.5 Simultaneous Injection: Two Channel Technique \u003cbr\u003e4.1.6 Simultaneous Injection: Three Channel Technique \u003cbr\u003e4.1.7 Part Design and Tooling Requirements for Co-Injection Moulding \u003cbr\u003e4.1.8 Rheology and Mould Filling: Why and How Co-Injection Moulding Works \u003cbr\u003e4.1.9 Immiscible Materials Research in Co-Injection Moulding \u003cbr\u003e4.1.10 Co-Injection Moulding Applications - Case Studies \u003cbr\u003e4.1.11 Recycling and Legislation \u003cbr\u003e4.1.12 Discussion and Conclusions \u003cbr\u003e4.2 Bi-Injection Moulding \u003cbr\u003e4.3 Interval Injection Moulding \u003cbr\u003e5. Multi-Shot Moulding \u003cbr\u003e\u003cbr\u003e5.1 Machine Technology \u003cbr\u003e5.1.1 Injection Unit Configurations \u003cbr\u003e5.1.2 Plastication Design \u003cbr\u003e5.1.3 Machine Type \u003cbr\u003e5.2 Core Back Moulding \u003cbr\u003e5.3 Rotating Tool Moulding \u003cbr\u003e5.4 Transfer Moulding \u003cbr\u003e5.5 Multi-Shot with a Single Injection Unit \u003cbr\u003e5.6 Material Selection for Multi-Shot \u003cbr\u003e5.6.1 Material Properties \u003cbr\u003e5.6.2 Material Process Order \u003cbr\u003e5.6.3 Using Thermoset Materials \u003cbr\u003e5.6.4 Liquid Silicone Rubber (LSR) \u003cbr\u003e5.6.5 Thermoplastic Elastomers (TPEs) \u003cbr\u003e5.7 Multi-Shot Moulding Applications - Case Studies \u003cbr\u003e5.7.1 Trio Knob \u003cbr\u003e5.7.2 Stanley Screwdriver \u003cbr\u003e5.8 Limitations to Multi-Shot Moulding \u003cbr\u003e6. Over-Moulding \u003cbr\u003e\u003cbr\u003e6.1 Insert Moulding \u003cbr\u003e6.2 Lost Core Moulding \u003cbr\u003e7. The Future? \u003cbr\u003e\u003cbr\u003eAdditional References \u003cbr\u003eAbbreviations and Acronyms \u003cbr\u003eAbstracts from the Polymer Library Database \u003cbr\u003eSubject Index\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDr. Goodship is a Senior Research Fellow with 14 years experience in the industry, expertise in coinjection moulding technology and a particular interest in recycling. Jo Love is an experienced materials engineer currently working on in-mould decoration. The authors are based at the Warwick Manufacturing Group in the Advanced Technology Centre at the University of Warwick."}

Handbook of Polymer Foams

$190.00

{"id":11242213380,"title":"Handbook of Polymer Foams","handle":"978-1-85957-388-4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: David Eaves \u003cbr\u003eISBN 978-1-85957-388-6 \u003cbr\u003e\u003cbr\u003epages 274\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe use of polymer foams is extremely widespread. Indeed, it is hard to think of any industries where polymer foams do not have a part to play. They can be found for example in sports and leisure products, in military applications, in vehicles, in aircraft, and in the home. Most people will encounter polymer foams every day in one form or another, whether it be in furniture, in packaging, in their car, in refrigerator insulation, or in some other common application. \u003cbr\u003e\u003cbr\u003eAlthough naturally occurring polymer foams have been known for a long time, (e.g., sponges, cork), synthetic polymer foams have only been introduced to the market over the last fifty years or so. The development of a new polymer has usually been quickly followed by its production in an expanded or foam form owing to the unique and useful properties, which can be realised in the expanded state. \u003cbr\u003e\u003cbr\u003eThis Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers, blowing agents having undergone considerable change and development in recent years in order to meet the requirements of the Montreal Protocol in relation to the reduction and elimination of chloroflurocarbons (CFC) and other ozone depleting agents. A chapter is also included on microcellular foams - a relatively new development where applications are still being explored. Most chapters have references to facilitate further exploration of the topics. The chapters are all written by experts in the field. \u003cbr\u003e\u003cbr\u003eThis book will be of interest to those just embarking upon an exploration of the subject of foams, whether in industry or academia. But this will be equally useful to those already working in the field, who need to know about different types of foam.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface \u003cbr\u003e1 Foam Fundamentals (David Eaves, Independent Consultant)\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Foam Structure\u003cbr\u003e1.3 Foam Properties\u003cbr\u003e1.3.1 Compression Properties\u003cbr\u003e1.3.2 Energy Absorption Properties\u003cbr\u003e1.3.3 Thermal Properties\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e2 Blowing Agents (Sachida Singh, Huntsman Polyurethanes)\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Physical Blowing Agents\u003cbr\u003e2.2.1 Selection Criteria for Physical Blowing Agents\u003cbr\u003e2.2.2 Halogenated Hydrocarbons\u003cbr\u003e2.2.3 Hydrocarbons (HC)\u003cbr\u003e2.2.4 Inert Gases\u003cbr\u003e2.2.5 Other Physical Blowing Agents\u003cbr\u003e2.2.6 Blends of Physical Blowing Agents\u003cbr\u003e2.2.7 Encapsulated Physical Blowing Agents\u003cbr\u003e2.2.8 Physical Blowing Agent by Foam Type and Application\u003cbr\u003e2.3 Chemical Blowing Agents\u003cbr\u003e2.3.1 Selection Criteria for Chemical Blowing Agent\u003cbr\u003e2.3.2 Exothermic CBA\u003cbr\u003e2.3.3 Endothermic CBA\u003cbr\u003e2.3.4 Endo\/Exo Blends\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e3 Expanded Polystyrene: Development, Processing, Applications and Key Issues (Andrew Barnetson, BPF)\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.1.1 Development of Expanded Polystyrene (EPS)\u003cbr\u003e3.2 Manufacture of Expanded Polystyrene Mouldings\u003cbr\u003e3.3 Applications for Expanded Polystyrene Packaging\u003cbr\u003e3.3.1 Packaging\u003cbr\u003e3.3.2 Construction\u003cbr\u003e3.3.3 Other Applications\u003cbr\u003e3.3.4 Novel Applications\u003cbr\u003e3.4 Properties of EPS\u003cbr\u003e3.4.1 Mechanical Performance\u003cbr\u003e3.4.2 Thermal Insulation\u003cbr\u003e3.4.3 Chemical Properties\u003cbr\u003e3.4.4 Recent Research on Properties of EPS: Value for Fruit and Vegetables\u003cbr\u003e3.5 Global Structure of Markets and Companies\u003cbr\u003e3.5.1 Europe\u003cbr\u003e3.5.2 Asia\u003cbr\u003e3.5.3 USA\u003cbr\u003e3.6 Key Issues Facing the EPS Industry\u003cbr\u003e3.6.1 Fire\u003cbr\u003e3.6.2 Recycling\u003cbr\u003e3.6.2 Alternatives to Mechanical Recycling\u003cbr\u003eFurther Information \u003cbr\u003e\u003cbr\u003e4 Rigid Polyurethane Foams (David Eaves, Independent Consultant)\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Materials\u003cbr\u003e4.2.1 Polyols\u003cbr\u003e4.2.2 Isocyanates\u003cbr\u003e4.2.3 Blowing Agents\u003cbr\u003e4.2.4 Other Additives\u003cbr\u003e4.3 Manufacturing Processes for Rigid Polyurethane Foam\u003cbr\u003e4.4 Recycling Processes for Rigid Polyurethane Foam\u003cbr\u003e4.5 Properties of Rigid Polyurethane Foams\u003cbr\u003e4.6 Applications\u003cbr\u003e4.6.1 Applications in Construction\u003cbr\u003e4.6.2 Applications in the Appliance Industry\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e5 Flexible Polyurethane Foam (Tyler Housel, Inolex Chemical Company)\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Chemistry\u003cbr\u003e5.3 Starting Materials\u003cbr\u003e5.3.1 Isocyanate\u003cbr\u003e5.3.2 Polyol\u003cbr\u003e5.3.3 Water\u003cbr\u003e5.3.4 Surfactant\u003cbr\u003e5.3.5 Catalyst\u003cbr\u003e5.3.6 Colorants\u003cbr\u003e5.3.7 Antioxidants\u003cbr\u003e5.3.8 Light Stabilisers\u003cbr\u003e5.3.9 Flame Retardants\u003cbr\u003e5.3.10 Adhesion Promoters\u003cbr\u003e5.3.11 Other Additives\u003cbr\u003e5.4 The Foaming Process\u003cbr\u003e5.4.1 Raw Material Conditioning\u003cbr\u003e5.4.2 Mixing\u003cbr\u003e5.4.3 Growth\u003cbr\u003e5.4.4 Cell Opening\u003cbr\u003e5.4.5 Cure\u003cbr\u003e5.5 Manufacturing Equipment\u003cbr\u003e5.5.1 Storage and Delivery\u003cbr\u003e5.5.2 Mixing\u003cbr\u003e5.5.3 Foam Rise and Cure\u003cbr\u003e5.5.4 Innovations\u003cbr\u003e5.6 Foam Characterisation\u003cbr\u003e5.6.1 Density\u003cbr\u003e5.6.2 Hardness\u003cbr\u003e5.6.3 Resilience\u003cbr\u003e5.6.4 Porosity\u003cbr\u003e5.6.5 Strength Properties\u003cbr\u003e5.6.6 Cell Structure\u003cbr\u003e5.6.7 Environmental Stability\u003cbr\u003e5.6.8 Fatigue\u003cbr\u003e5.6.9 Compression Set\u003cbr\u003e5.6.10 Flammability\u003cbr\u003e5.7 FPF Markets\u003cbr\u003e5.7.1 Transportation\u003cbr\u003e5.7.2 Comfort\u003cbr\u003e5.7.3 Carpet Cushion\u003cbr\u003e5.7.4 Packaging\u003cbr\u003e5.7.5 Specialty Applications\u003cbr\u003e5.8 Environmental Issues\u003cbr\u003e5.9 Organisations\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e6 Rigid PVC Foam (Noreen Thomas, University of Loughborough)\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Foam Extrusion\u003cbr\u003e6.2.1 Basic Principles\u003cbr\u003e6.2.2 Extrusion Processes\u003cbr\u003e6.2.3 Effect of Processing Conditions\u003cbr\u003e6.3 Foam Formulation Technology\u003cbr\u003e6.3.1 Blowing Agents\u003cbr\u003e6.3.2 Processing Aids\u003cbr\u003e6.3.3 Type of PVC\u003cbr\u003e6.3.4 Stabilisers\u003cbr\u003e6.3.5 Lubricants\u003cbr\u003e6.3.6 Typical Formulations\u003cbr\u003e6.4 Properties\u003cbr\u003e6.5 Novel Processes and Applications\u003cbr\u003e6.5.1 Recycling\u003cbr\u003e6.5.2 Microcellular Foam\u003cbr\u003e6.5.3 Foamed Composites\u003cbr\u003e6.6 Summary\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e7 Flexible PVC Foams (Chris Howick, EVC)\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Flexible Foam Types and PVC Types\u003cbr\u003e7.2.1 Flexible Foams Based on Suspension PVC\u003cbr\u003e7.2.2 Flexible Foams Based on Dispersion or Paste Resins\u003cbr\u003e7.2.3 Chemically Blown Foams from PVC Plastisols: Fundamentals\u003cbr\u003e7.2.4 PVC Resins used in Plastisol Foam Formation\u003cbr\u003e7.2.5 Mineral Fillers\u003cbr\u003e7.2.6 Pigments\u003cbr\u003e7.2.7 Liquid Plasticiser\u003cbr\u003e7.2.8 Blowing Agent Type and Level\u003cbr\u003e7.3 Products Utilising Foamed Plastisols\u003cbr\u003e7.3.1 Floorings and Carpet Backings\u003cbr\u003e7.3.2 Wallcoverings\u003cbr\u003e7.3.3 Synthetic Leather\u003cbr\u003e7.3.4 General Foams\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e8 Polyolefin Foams (David Eaves, Independent Consultant)\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Manufacturing Processes and Materials\u003cbr\u003e8.2.1 Extruded Non-Crosslinked Foam\u003cbr\u003e8.2.2 Expanded (Non-Crosslinked) Polyolefin Beads\u003cbr\u003e8.2.3 Extruded Crosslinked Foam - Processes\u003cbr\u003e8.2.4 Press Moulded Crosslinked Foam Process\u003cbr\u003e8.2.5 Injection Moulded Foam Process\u003cbr\u003e8.2.6 The Nitrogen Autoclave Process\u003cbr\u003e8.2.7 Recycling Processes\u003cbr\u003e8.2.8 Post Manufacturing Operations\u003cbr\u003e8.3 Properties of Polyolefin Foams\u003cbr\u003e8.4 Applications\u003cbr\u003e8.5 Foam Specifications\u003cbr\u003e8.5.1 Packaging\u003cbr\u003e8.5.2 Automotive\u003cbr\u003e8.5.3 Furnishings\u003cbr\u003e8.5.4 Buoyancy\u003cbr\u003e8.5.5 Aerospace\u003cbr\u003e8.5.6 Construction\u003cbr\u003e8.5.7 Toys\u003cbr\u003e8.5.8 Food contact\u003cbr\u003e8.6 Markets\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e9 Latex Foam (Rani Joseph, Cochin University)\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Dunlop Process\u003cbr\u003e9.2.1 Batch Process\u003cbr\u003e9.2.2 Selecting a Formulation for Latex Compounds\u003cbr\u003e9.2.3 Selection of Other Compounding Ingredients\u003cbr\u003e9.2.4 Continuous Process for Latex Foam Production\u003cbr\u003e9.3 Talalay Process\u003cbr\u003e9.4 Trouble Shooting in Latex Foam Manufacture\u003cbr\u003e9.5 Testing\u003cbr\u003e9.5.1 Compression Set\u003cbr\u003e9.5.2 Indentation Hardness\u003cbr\u003e9.5.3 Flexing Resistance\u003cbr\u003e9.5.4 Density\u003cbr\u003e9.5.5 Metallic Impurities\u003cbr\u003e9.6 Important Uses of Latex Foam\u003cbr\u003e9.6.1 Transportation\u003cbr\u003e9.6.2 Furniture\u003cbr\u003e9.6.3 Special Uses\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e10 Microcellular Foams (Vipin Kumar, University of Washington \u0026amp; Krishna Nadella, University of Washington)\u003cbr\u003e10.1 Introduction\u003cbr\u003e10.2 Processing of Microcellular Foams\u003cbr\u003e10.2.1 The Solid-State Batch Process\u003cbr\u003e10.2.2 The Semi-Continuous Process\u003cbr\u003e10.2.3 Extrusion and other Processing Methods\u003cbr\u003e10.3 Properties of Microcellular Foams\u003cbr\u003e10.4 Current Research Directions\u003cbr\u003e10.4.1 Microcellular Materials for Construction\u003cbr\u003e11.4.2 Open-Cell (Porous) Microcellular Foams\u003cbr\u003e10.4.3 Sub-Micron Foams and Nanofoams\u003cbr\u003e10.5 Commercial Opportunities\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDavid Eaves studied polymer chemistry at the University in Birmingham and completed his doctorate in 1958. He then joined Dunlop in their Central Research and Development Laboratories in Birmingham, later going out to Ireland (Cork) and Japan (Kobe) to establish and manage overseas satellite research centres. In 1984 he left Dunlop and joined BP Chemicals' polyethylene foam operation in Croydon as Technical Manager. He was part of the management buy-out team in 1992 when the company was renamed 'Zotefoams', and retired in 1998 as Technical Director. He has published many papers on aspects of polymer and polymer foam technology and is the author of the Rapra report 'Polymer Foams: Trends in Use and Technology.","published_at":"2017-06-22T21:13:18-04:00","created_at":"2017-06-22T21:13:19-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2004","aerospace","automotive","blends","blowing agents","book","construction","fire","foams","food","furnishing","hydrocarbons","inert gases","insulation","molding","moulding","p-structural","packaging","polymer","polymers","polystyrene","properties","recycling","structure","toys"],"price":19000,"price_min":19000,"price_max":19000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378350212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymer Foams","public_title":null,"options":["Default Title"],"price":19000,"weight":1000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-388-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663","options":["Title"],"media":[{"alt":null,"id":355732226141,"position":1,"preview_image":{"aspect_ratio":0.701,"height":499,"width":350,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663"},"aspect_ratio":0.701,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: David Eaves \u003cbr\u003eISBN 978-1-85957-388-6 \u003cbr\u003e\u003cbr\u003epages 274\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe use of polymer foams is extremely widespread. Indeed, it is hard to think of any industries where polymer foams do not have a part to play. They can be found for example in sports and leisure products, in military applications, in vehicles, in aircraft, and in the home. Most people will encounter polymer foams every day in one form or another, whether it be in furniture, in packaging, in their car, in refrigerator insulation, or in some other common application. \u003cbr\u003e\u003cbr\u003eAlthough naturally occurring polymer foams have been known for a long time, (e.g., sponges, cork), synthetic polymer foams have only been introduced to the market over the last fifty years or so. The development of a new polymer has usually been quickly followed by its production in an expanded or foam form owing to the unique and useful properties, which can be realised in the expanded state. \u003cbr\u003e\u003cbr\u003eThis Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers, blowing agents having undergone considerable change and development in recent years in order to meet the requirements of the Montreal Protocol in relation to the reduction and elimination of chloroflurocarbons (CFC) and other ozone depleting agents. A chapter is also included on microcellular foams - a relatively new development where applications are still being explored. Most chapters have references to facilitate further exploration of the topics. The chapters are all written by experts in the field. \u003cbr\u003e\u003cbr\u003eThis book will be of interest to those just embarking upon an exploration of the subject of foams, whether in industry or academia. But this will be equally useful to those already working in the field, who need to know about different types of foam.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface \u003cbr\u003e1 Foam Fundamentals (David Eaves, Independent Consultant)\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Foam Structure\u003cbr\u003e1.3 Foam Properties\u003cbr\u003e1.3.1 Compression Properties\u003cbr\u003e1.3.2 Energy Absorption Properties\u003cbr\u003e1.3.3 Thermal Properties\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e2 Blowing Agents (Sachida Singh, Huntsman Polyurethanes)\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Physical Blowing Agents\u003cbr\u003e2.2.1 Selection Criteria for Physical Blowing Agents\u003cbr\u003e2.2.2 Halogenated Hydrocarbons\u003cbr\u003e2.2.3 Hydrocarbons (HC)\u003cbr\u003e2.2.4 Inert Gases\u003cbr\u003e2.2.5 Other Physical Blowing Agents\u003cbr\u003e2.2.6 Blends of Physical Blowing Agents\u003cbr\u003e2.2.7 Encapsulated Physical Blowing Agents\u003cbr\u003e2.2.8 Physical Blowing Agent by Foam Type and Application\u003cbr\u003e2.3 Chemical Blowing Agents\u003cbr\u003e2.3.1 Selection Criteria for Chemical Blowing Agent\u003cbr\u003e2.3.2 Exothermic CBA\u003cbr\u003e2.3.3 Endothermic CBA\u003cbr\u003e2.3.4 Endo\/Exo Blends\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e3 Expanded Polystyrene: Development, Processing, Applications and Key Issues (Andrew Barnetson, BPF)\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.1.1 Development of Expanded Polystyrene (EPS)\u003cbr\u003e3.2 Manufacture of Expanded Polystyrene Mouldings\u003cbr\u003e3.3 Applications for Expanded Polystyrene Packaging\u003cbr\u003e3.3.1 Packaging\u003cbr\u003e3.3.2 Construction\u003cbr\u003e3.3.3 Other Applications\u003cbr\u003e3.3.4 Novel Applications\u003cbr\u003e3.4 Properties of EPS\u003cbr\u003e3.4.1 Mechanical Performance\u003cbr\u003e3.4.2 Thermal Insulation\u003cbr\u003e3.4.3 Chemical Properties\u003cbr\u003e3.4.4 Recent Research on Properties of EPS: Value for Fruit and Vegetables\u003cbr\u003e3.5 Global Structure of Markets and Companies\u003cbr\u003e3.5.1 Europe\u003cbr\u003e3.5.2 Asia\u003cbr\u003e3.5.3 USA\u003cbr\u003e3.6 Key Issues Facing the EPS Industry\u003cbr\u003e3.6.1 Fire\u003cbr\u003e3.6.2 Recycling\u003cbr\u003e3.6.2 Alternatives to Mechanical Recycling\u003cbr\u003eFurther Information \u003cbr\u003e\u003cbr\u003e4 Rigid Polyurethane Foams (David Eaves, Independent Consultant)\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Materials\u003cbr\u003e4.2.1 Polyols\u003cbr\u003e4.2.2 Isocyanates\u003cbr\u003e4.2.3 Blowing Agents\u003cbr\u003e4.2.4 Other Additives\u003cbr\u003e4.3 Manufacturing Processes for Rigid Polyurethane Foam\u003cbr\u003e4.4 Recycling Processes for Rigid Polyurethane Foam\u003cbr\u003e4.5 Properties of Rigid Polyurethane Foams\u003cbr\u003e4.6 Applications\u003cbr\u003e4.6.1 Applications in Construction\u003cbr\u003e4.6.2 Applications in the Appliance Industry\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e5 Flexible Polyurethane Foam (Tyler Housel, Inolex Chemical Company)\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Chemistry\u003cbr\u003e5.3 Starting Materials\u003cbr\u003e5.3.1 Isocyanate\u003cbr\u003e5.3.2 Polyol\u003cbr\u003e5.3.3 Water\u003cbr\u003e5.3.4 Surfactant\u003cbr\u003e5.3.5 Catalyst\u003cbr\u003e5.3.6 Colorants\u003cbr\u003e5.3.7 Antioxidants\u003cbr\u003e5.3.8 Light Stabilisers\u003cbr\u003e5.3.9 Flame Retardants\u003cbr\u003e5.3.10 Adhesion Promoters\u003cbr\u003e5.3.11 Other Additives\u003cbr\u003e5.4 The Foaming Process\u003cbr\u003e5.4.1 Raw Material Conditioning\u003cbr\u003e5.4.2 Mixing\u003cbr\u003e5.4.3 Growth\u003cbr\u003e5.4.4 Cell Opening\u003cbr\u003e5.4.5 Cure\u003cbr\u003e5.5 Manufacturing Equipment\u003cbr\u003e5.5.1 Storage and Delivery\u003cbr\u003e5.5.2 Mixing\u003cbr\u003e5.5.3 Foam Rise and Cure\u003cbr\u003e5.5.4 Innovations\u003cbr\u003e5.6 Foam Characterisation\u003cbr\u003e5.6.1 Density\u003cbr\u003e5.6.2 Hardness\u003cbr\u003e5.6.3 Resilience\u003cbr\u003e5.6.4 Porosity\u003cbr\u003e5.6.5 Strength Properties\u003cbr\u003e5.6.6 Cell Structure\u003cbr\u003e5.6.7 Environmental Stability\u003cbr\u003e5.6.8 Fatigue\u003cbr\u003e5.6.9 Compression Set\u003cbr\u003e5.6.10 Flammability\u003cbr\u003e5.7 FPF Markets\u003cbr\u003e5.7.1 Transportation\u003cbr\u003e5.7.2 Comfort\u003cbr\u003e5.7.3 Carpet Cushion\u003cbr\u003e5.7.4 Packaging\u003cbr\u003e5.7.5 Specialty Applications\u003cbr\u003e5.8 Environmental Issues\u003cbr\u003e5.9 Organisations\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e6 Rigid PVC Foam (Noreen Thomas, University of Loughborough)\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Foam Extrusion\u003cbr\u003e6.2.1 Basic Principles\u003cbr\u003e6.2.2 Extrusion Processes\u003cbr\u003e6.2.3 Effect of Processing Conditions\u003cbr\u003e6.3 Foam Formulation Technology\u003cbr\u003e6.3.1 Blowing Agents\u003cbr\u003e6.3.2 Processing Aids\u003cbr\u003e6.3.3 Type of PVC\u003cbr\u003e6.3.4 Stabilisers\u003cbr\u003e6.3.5 Lubricants\u003cbr\u003e6.3.6 Typical Formulations\u003cbr\u003e6.4 Properties\u003cbr\u003e6.5 Novel Processes and Applications\u003cbr\u003e6.5.1 Recycling\u003cbr\u003e6.5.2 Microcellular Foam\u003cbr\u003e6.5.3 Foamed Composites\u003cbr\u003e6.6 Summary\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e7 Flexible PVC Foams (Chris Howick, EVC)\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Flexible Foam Types and PVC Types\u003cbr\u003e7.2.1 Flexible Foams Based on Suspension PVC\u003cbr\u003e7.2.2 Flexible Foams Based on Dispersion or Paste Resins\u003cbr\u003e7.2.3 Chemically Blown Foams from PVC Plastisols: Fundamentals\u003cbr\u003e7.2.4 PVC Resins used in Plastisol Foam Formation\u003cbr\u003e7.2.5 Mineral Fillers\u003cbr\u003e7.2.6 Pigments\u003cbr\u003e7.2.7 Liquid Plasticiser\u003cbr\u003e7.2.8 Blowing Agent Type and Level\u003cbr\u003e7.3 Products Utilising Foamed Plastisols\u003cbr\u003e7.3.1 Floorings and Carpet Backings\u003cbr\u003e7.3.2 Wallcoverings\u003cbr\u003e7.3.3 Synthetic Leather\u003cbr\u003e7.3.4 General Foams\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e8 Polyolefin Foams (David Eaves, Independent Consultant)\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Manufacturing Processes and Materials\u003cbr\u003e8.2.1 Extruded Non-Crosslinked Foam\u003cbr\u003e8.2.2 Expanded (Non-Crosslinked) Polyolefin Beads\u003cbr\u003e8.2.3 Extruded Crosslinked Foam - Processes\u003cbr\u003e8.2.4 Press Moulded Crosslinked Foam Process\u003cbr\u003e8.2.5 Injection Moulded Foam Process\u003cbr\u003e8.2.6 The Nitrogen Autoclave Process\u003cbr\u003e8.2.7 Recycling Processes\u003cbr\u003e8.2.8 Post Manufacturing Operations\u003cbr\u003e8.3 Properties of Polyolefin Foams\u003cbr\u003e8.4 Applications\u003cbr\u003e8.5 Foam Specifications\u003cbr\u003e8.5.1 Packaging\u003cbr\u003e8.5.2 Automotive\u003cbr\u003e8.5.3 Furnishings\u003cbr\u003e8.5.4 Buoyancy\u003cbr\u003e8.5.5 Aerospace\u003cbr\u003e8.5.6 Construction\u003cbr\u003e8.5.7 Toys\u003cbr\u003e8.5.8 Food contact\u003cbr\u003e8.6 Markets\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e9 Latex Foam (Rani Joseph, Cochin University)\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Dunlop Process\u003cbr\u003e9.2.1 Batch Process\u003cbr\u003e9.2.2 Selecting a Formulation for Latex Compounds\u003cbr\u003e9.2.3 Selection of Other Compounding Ingredients\u003cbr\u003e9.2.4 Continuous Process for Latex Foam Production\u003cbr\u003e9.3 Talalay Process\u003cbr\u003e9.4 Trouble Shooting in Latex Foam Manufacture\u003cbr\u003e9.5 Testing\u003cbr\u003e9.5.1 Compression Set\u003cbr\u003e9.5.2 Indentation Hardness\u003cbr\u003e9.5.3 Flexing Resistance\u003cbr\u003e9.5.4 Density\u003cbr\u003e9.5.5 Metallic Impurities\u003cbr\u003e9.6 Important Uses of Latex Foam\u003cbr\u003e9.6.1 Transportation\u003cbr\u003e9.6.2 Furniture\u003cbr\u003e9.6.3 Special Uses\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e10 Microcellular Foams (Vipin Kumar, University of Washington \u0026amp; Krishna Nadella, University of Washington)\u003cbr\u003e10.1 Introduction\u003cbr\u003e10.2 Processing of Microcellular Foams\u003cbr\u003e10.2.1 The Solid-State Batch Process\u003cbr\u003e10.2.2 The Semi-Continuous Process\u003cbr\u003e10.2.3 Extrusion and other Processing Methods\u003cbr\u003e10.3 Properties of Microcellular Foams\u003cbr\u003e10.4 Current Research Directions\u003cbr\u003e10.4.1 Microcellular Materials for Construction\u003cbr\u003e11.4.2 Open-Cell (Porous) Microcellular Foams\u003cbr\u003e10.4.3 Sub-Micron Foams and Nanofoams\u003cbr\u003e10.5 Commercial Opportunities\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDavid Eaves studied polymer chemistry at the University in Birmingham and completed his doctorate in 1958. He then joined Dunlop in their Central Research and Development Laboratories in Birmingham, later going out to Ireland (Cork) and Japan (Kobe) to establish and manage overseas satellite research centres. In 1984 he left Dunlop and joined BP Chemicals' polyethylene foam operation in Croydon as Technical Manager. He was part of the management buy-out team in 1992 when the company was renamed 'Zotefoams', and retired in 1998 as Technical Director. He has published many papers on aspects of polymer and polymer foam technology and is the author of the Rapra report 'Polymer Foams: Trends in Use and Technology."}

Handbook of Solvents -...

$295.00

{"id":2059099308125,"title":"Handbook of Solvents - 3rd Edition, Volume 2, Use, Health, and Environment","handle":"handbook-of-solvents-3rd-edition-volume-2-use-health-and-environment","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych, Editor \u003cbr\u003eISBN 978-1-927885-41-3 \u003cbr\u003e\u003cbr\u003ePublication date: March 2019\u003cbr\u003eNumber of pages: 930+xii\u003cbr\u003eFigures: 240\u003cbr\u003eTables: 260\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe volume begins with a discussion of solvent used in over 30 industries, which are the main consumers of solvents. The analysis is conducted based on available data and contains information on the types (and frequently amounts) of solvents used and potential problems and solutions. This followed by a discussion of residual solvents left in final products.\u003cbr\u003e\u003cbr\u003eThe third edition contains the most recent findings and trends in the solvent application. This volume together with Vol. 1 Properties; Databook of Green Solvents; and Databook of Solvents contains the most comprehensive, and up to date information ever published on solvents. \u003cbr\u003e\u003cbr\u003eThe volume begins with a discussion of solvent used in over 30 industries, which are the main consumers of solvents. The analysis is conducted based on the available data and contains information on the types (and frequently amounts) of solvents used and potential problems and solutions. \u003cbr\u003e\u003cbr\u003eChapter 14 contains information on the methods of analysis of solvents and materials containing solvents. The chapter is divided into two sections containing standard and special methods of solvent analysis. This chapter is followed by a discussion of residual solvents left in final products.\u003cbr\u003e\u003cbr\u003eThe environmental impact of solvents, such as their fate and movement in the water, soil and air, fate-based management of solvent containing wastes, and ecotoxicological effects are discussed in chapter 16. The chapter also contains discussion of solvents impact on tropospheric air pollution.\u003cbr\u003e\u003cbr\u003eThe next two chapters are devoted to toxicology of solvents and regulations aiming to keep solvents toxicity under control. The analysis of concentration of solvents in more than 15 industries, specific issues related to paint industry, and characteristics of environment in automotive collision repair shops are followed by the thorough discussion of regulations in the USA and Europe.\u003cbr\u003e\u003cbr\u003eSolvent toxicology chapters were written by professors and scientists from major centers who study the effects of solvents on various aspects of human health, immediate reaction to solvent poisoning, persistence of symptoms of solvent exposure, and effects of solvents on various parts of the human organism. This is a unique collection of observations which should be frequently consulted by solvent users and agencies which are responsible for the protection of people in the industrial environment.\u003cbr\u003e\u003cbr\u003eThe following chapters show some examples of solvent substitution by safer materials. Here the emphasis is placed on supercritical solvents, ionic liquids, deep eutectic solvents, and agriculture-based products, such as ethyl lactate. Discussion of solvent recycling, removal, and degradation includes absorptive solvent recovery, comparison of results of recovery and incineration, and application of solar photocatalytic oxidation. \u003cbr\u003e\u003cbr\u003eThe book is concluded with evaluation of methods of natural attenuation of various solvents in soils and modern methods of cleaning contaminated soils.\u003cbr\u003e\u003cbr\u003eThis comprehensive two volume book has no equal in depth and breadth to any other publication available today Also, Solvent database on CD-ROM is available which contains data on close to 2000 solvents. The data organized in sections such as General, Physical \u0026amp; Chemical Properties, Health \u0026amp; Safety, Environmental, and Use, contain all available and required data to use solvent efficiently and safely.\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n13 SOLVENT USE IN VARIOUS INDUSTRIES\u003cbr\u003e13.1 Adhesives and sealants\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.2 Aerospace\u003cbr\u003e13.3 Asphalt compounding\u003cbr\u003e13.4 Biotechnology\u003cbr\u003e13.4.1 Organic solvents in microbial production processes\u003cbr\u003eMichiaki Matsumoto, Sonja Isken, Jan A. M. de Bont, Division of Industrial Microbiology Department of Food Technology and Nutritional Sciences, Wageningen University, Wageningen, The Netherlands\u003cbr\u003e13.4.2 Solvent-resistant microorganisms\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany\u003cbr\u003e13.4.3 Choice of solvent for enzymatic reaction in organic solvent\u003cbr\u003eTsuneo Yamane, Graduate School of Bio- and Agro-Sciences, Nagoya University, Nagoya, Japan\u003cbr\u003e13.5 Coil coating\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.6 Cosmetics and personal care products\u003cbr\u003e13.7 Dry cleaning - treatment of textiles in solvents\u003cbr\u003eKaspar D. Hasenclever, Kreussler \u0026amp; Co. GmbH, Wiesbaden, Germany\u003cbr\u003e13.8 Fabricated metal products\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.9 Food industry - solvents for extracting vegetable oils\u003cbr\u003ePhillip J. Wakelyn, National Cotton Council, Washington, DC, USA; Peter J. Wan, USDA, ARS, SRRC, New Orleans, LA, USA\u003cbr\u003e13.10 Ground transportation\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.11 Inorganic chemical industry\u003cbr\u003e13.12 Iron and steel industry\u003cbr\u003e13.13 Lumber and wood products - Wood preservation treatment: significance of solvents\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany; Gerhard Volland, Otto-Graf-Institut, Universitaet Stuttgart, Stuttgart, Germany\u003cbr\u003e13.14 Medical applications\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.15 Metal casting\u003cbr\u003e13.16 Motor vehicle assembly\u003cbr\u003e13.17 Organic chemical industry\u003cbr\u003e13.18 Paints and coatings\u003cbr\u003e13.18.1 Architectural surface coatings and solvents\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany; Gerhard Volland, Otto-Graf-Institut, Universitaet Stuttgart, Stuttgart, Germany\u003cbr\u003e13.18.2 Recent advances in coalescing solvents for waterborne coatings\u003cbr\u003eDavid Randall, Chemoxy International pcl, Cleveland, United Kingdom\u003cbr\u003e13.19 Petroleum refining industry\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.20 Pharmaceutical industry\u003cbr\u003e13.20.1 Use of solvents in the manufacture of drug substances (DS) and drug products (DP)\u003cbr\u003eMichel Bauer, International Analytical Department, Sanofi-Synthelabo, Toulouse, France; Christine Barthelemy, Laboratoire de Pharmacie Galenique et Biopharmacie, Faculte des Sciences Pharmaceutiques et Biologiques, Universite de Lille 2, Lille, France\u003cbr\u003e13.20.2 Predicting cosolvency for pharmaceutical and environmental applications\u003cbr\u003eAn Li, School of Public Health, University of Illinois at Chicago, Chicago, IL, USA\u003cbr\u003e13.21 Polymers and man-made fibers\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.22 Printing industry\u003cbr\u003e13.23 Pulp and paper\u003cbr\u003e13.24 Rubber and Plastics\u003cbr\u003e13.25 Use of solvents in the shipbuilding and ship repair industry\u003cbr\u003eMohamed Serageldin, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA; Dave Reeves, Midwest Research Institute, Cary, NC, USA\u003cbr\u003e13.26 Stone, clay, glass, and concrete\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.27 Textile industry\u003cbr\u003e13.28 Transportation equipment cleaning\u003cbr\u003e13.29 Water transportation\u003cbr\u003e13.30 Wood furniture\u003cbr\u003e13.31 Summary\u003cbr\u003e\u003cbr\u003e14 METHODS OF SOLVENT DETECTION AND TESTING\u003cbr\u003e14.1 Standard methods of solvent analysis\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e14.2 Special methods of solvent analysis\u003cbr\u003eMyrto Petreas, California Environmental Protection Agency, Berkeley, USA\u003cbr\u003e\u003cbr\u003e15 RESIDUAL SOLVENTS IN PRODUCTS\u003cbr\u003e15.1 Residual solvents in various products\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e15.2 Residual solvents in pharmaceutical substances and products\u003cbr\u003eEric Deconinck and Bart Desmedt\u003cbr\u003e\u003cbr\u003e16 ENVIRONMENTAL IMPACT OF SOLVENTS\u003cbr\u003e16.1 The environmental chemistry of organic solvents\u003cbr\u003eWilliam R. Roy, USA\u003cbr\u003e16.2 The environmental chemistry of ionic liquids\u003cbr\u003eWilliam R. Roy, USA\u003cbr\u003e16.3 Organic solvent impacts on tropospheric air pollution\u003cbr\u003eMichelle Bergin, Armistead Russell, Georgia Institute of Technology, Atlanta, Georgia, USA\u003cbr\u003e\u003cbr\u003e17 CONCENTRATION OF SOLVENTS IN VARIOUS INDUSTRIAL ENVIRONMENTS\u003cbr\u003e17.1 Measurement and estimation of solvents emission and odor\u003cbr\u003eMargot Scheithauer, Institut fuer Holztechnologie Dresden, Germany\u003cbr\u003e17.2 Emission of organic solvents during usage of ecological paints\u003cbr\u003eKrzysztof M. Benczek, Joanna Kurpiewska, Central Institute for Labor Protection, Warsaw, Poland\u003cbr\u003e17.3 Solvent levels in the vehicle collision repair industry\u003cbr\u003eSamuel Keer, Centre for Public Health Research, Wellington, New Zealand\u003cbr\u003e\u003cbr\u003e18 REGULATIONS\u003cbr\u003e18 Regulations in US and other countries\u003cbr\u003eCarlos M. Nunez, U.S. Environmental Protection Agency, National Risk Management Research Laboratory Research, Triangle Park, NC, USA\u003cbr\u003e18.1 Regulations in Europe\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany\u003cbr\u003e19 TOXIC EFFECTS OF SOLVENT EXPOSURE\u003cbr\u003e19.1 Toxicokinetics, toxicodynamics, and toxicology\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, University of Tuebingen, Tuebingen, Germany\u003cbr\u003e19.2 Solvent exposure in pregnancy\u003cbr\u003eSC Mitchell, Computational and Systems Medicine, Imperial College, London, UK and RH Waring\u003cbr\u003eSchool of Biosciences, University of Birmingham, UK \u003cbr\u003e19.3 Nephrotoxicity of industrial solvents\u003cbr\u003eNachman Brautbar and Michael P. Wu, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.4 Lymphohematopoietic malignancies among workers exposed to benzene including leukemia, lymphoma, and multiple myeloma\u003cbr\u003eNachman Brautbar, Michael P. Wu, Alexandra E. Rieders, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.5 Genotoxicity of benzene\u003cbr\u003eNachman Brautbar, Michael P. Wu, Alexandra E. Rieders, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.6 Chromosomal aberrations and sister chromatoid exchanges\u003cbr\u003eNachman Brautbar, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.7 Hepatotoxicity of industrial solvents\u003cbr\u003eNachman Brautbar and Michael P. Wu, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.8 Toxicity of environmental solvent exposure for brain, lung and heart\u003cbr\u003eKaye H. Kilburn, School of Medicine, University of Southern California, Los Angeles, CA, USA\u003cbr\u003e\u003cbr\u003e20 SUBSTITUTION OF SOLVENTS BY SAFER PRODUCTS AND PROCESSES\u003cbr\u003e20.1 Supercritical solvents\u003cbr\u003eAydin K. Sunol, Sermin G. Sunol, Department of Chemical Engineering, University of South Florida, Tampa, FL, USA\u003cbr\u003e20.2 Ionic liquids\u003cbr\u003eD.W. Rooney and Johan Jacquemin, School of Chemistry, The Queen’s University of Belfast, Belfast, Northern Ireland\u003cbr\u003e20.3 Deep eutectic solvents and their applications as new green reaction media\u003cbr\u003eJoaquin Garcia-Alvarez, Universidad de Oviedo, Spain\u003cbr\u003e20.4 Novel applications of the bio-based solvent ethyl lactate in chemical technology\u003cbr\u003eDavid Villanueva-Bermejo, Department of Agricultural, Food and Nutritional Science, \u003cbr\u003eUniversity of Alberta, Edmonton, Alberta, Canada and Tiziana Fornari, Instituto de Investigación en Ciencias de la Alimentación, Universidad Autonoma de Madrid, Madrid, Spain\u003cbr\u003e\u003cbr\u003e21 SOLVENT RECYCLING, REMOVAL, AND DEGRADATION\u003cbr\u003e21.1 Absorptive solvent recovery\u003cbr\u003eKlaus-Dirk Henning, CarboTech Aktivkohlen GmbH, Essen, Germany\u003cbr\u003e21.2 Recovery versus incineration\u003cbr\u003eDanilo Alexander Figueroa Paredes and José Espinosa. INGAR, Avellaneda, Argentina and Antonio Amelio, Department of Environment, Land and Infrastructure Engineering), Politecnico di Torino, Torino, Italy \u003cbr\u003e21.3 Solvent recovery, recycling, and incineration\u003cbr\u003eGeorge Wypych\u003cbr\u003eChemTec Laboratories, Toronto, Canada\u003cbr\u003e21.4 Application of solar photocatalytic oxidation to VOC-containing airstreams\u003cbr\u003eK. A. Magrini, A. S. Watt, L. C. Boyd, E. J. Wolfrum, S. A. Larson,C. Roth, G. C. Glatzmaier, National Renewable Energy Laboratory, Golden, CO, USA\u003cbr\u003e\u003cbr\u003e22 NATURAL ATTENUATION OF CHLORINATED SOLVENTS IN GROUND WATER\u003cbr\u003eHanadi S. Rifai, Civil and Environmental Engineering, University of Houston, Houston, Texas, USA; Groundwater Services, Inc., Houston, Texas, USA; Charles J. Newell Todd H. Wiedemeier, Parson Engineering Science, Denver, CO, USA\u003cbr\u003eMoffett Field, CA\u003cbr\u003e\u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e","published_at":"2019-03-18T15:00:01-04:00","created_at":"2019-03-18T14:55:10-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["book","degradation","detection","environment","health","lymphohematopoietic study","pharmaceutical","recycling","regulations","solvents","tesing","toxic effects"],"price":29500,"price_min":29500,"price_max":29500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20181988212829,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Solvents - 3rd Edition, Volume 2, Use, Health, and Environment","public_title":null,"options":["Default Title"],"price":29500,"weight":1000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-65-2","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-41-3.jpg?v=1552935531"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-41-3.jpg?v=1552935531","options":["Title"],"media":[{"alt":null,"id":1423181709405,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-41-3.jpg?v=1552935531"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-41-3.jpg?v=1552935531","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych, Editor \u003cbr\u003eISBN 978-1-927885-41-3 \u003cbr\u003e\u003cbr\u003ePublication date: March 2019\u003cbr\u003eNumber of pages: 930+xii\u003cbr\u003eFigures: 240\u003cbr\u003eTables: 260\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe volume begins with a discussion of solvent used in over 30 industries, which are the main consumers of solvents. The analysis is conducted based on available data and contains information on the types (and frequently amounts) of solvents used and potential problems and solutions. This followed by a discussion of residual solvents left in final products.\u003cbr\u003e\u003cbr\u003eThe third edition contains the most recent findings and trends in the solvent application. This volume together with Vol. 1 Properties; Databook of Green Solvents; and Databook of Solvents contains the most comprehensive, and up to date information ever published on solvents. \u003cbr\u003e\u003cbr\u003eThe volume begins with a discussion of solvent used in over 30 industries, which are the main consumers of solvents. The analysis is conducted based on the available data and contains information on the types (and frequently amounts) of solvents used and potential problems and solutions. \u003cbr\u003e\u003cbr\u003eChapter 14 contains information on the methods of analysis of solvents and materials containing solvents. The chapter is divided into two sections containing standard and special methods of solvent analysis. This chapter is followed by a discussion of residual solvents left in final products.\u003cbr\u003e\u003cbr\u003eThe environmental impact of solvents, such as their fate and movement in the water, soil and air, fate-based management of solvent containing wastes, and ecotoxicological effects are discussed in chapter 16. The chapter also contains discussion of solvents impact on tropospheric air pollution.\u003cbr\u003e\u003cbr\u003eThe next two chapters are devoted to toxicology of solvents and regulations aiming to keep solvents toxicity under control. The analysis of concentration of solvents in more than 15 industries, specific issues related to paint industry, and characteristics of environment in automotive collision repair shops are followed by the thorough discussion of regulations in the USA and Europe.\u003cbr\u003e\u003cbr\u003eSolvent toxicology chapters were written by professors and scientists from major centers who study the effects of solvents on various aspects of human health, immediate reaction to solvent poisoning, persistence of symptoms of solvent exposure, and effects of solvents on various parts of the human organism. This is a unique collection of observations which should be frequently consulted by solvent users and agencies which are responsible for the protection of people in the industrial environment.\u003cbr\u003e\u003cbr\u003eThe following chapters show some examples of solvent substitution by safer materials. Here the emphasis is placed on supercritical solvents, ionic liquids, deep eutectic solvents, and agriculture-based products, such as ethyl lactate. Discussion of solvent recycling, removal, and degradation includes absorptive solvent recovery, comparison of results of recovery and incineration, and application of solar photocatalytic oxidation. \u003cbr\u003e\u003cbr\u003eThe book is concluded with evaluation of methods of natural attenuation of various solvents in soils and modern methods of cleaning contaminated soils.\u003cbr\u003e\u003cbr\u003eThis comprehensive two volume book has no equal in depth and breadth to any other publication available today Also, Solvent database on CD-ROM is available which contains data on close to 2000 solvents. The data organized in sections such as General, Physical \u0026amp; Chemical Properties, Health \u0026amp; Safety, Environmental, and Use, contain all available and required data to use solvent efficiently and safely.\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n13 SOLVENT USE IN VARIOUS INDUSTRIES\u003cbr\u003e13.1 Adhesives and sealants\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.2 Aerospace\u003cbr\u003e13.3 Asphalt compounding\u003cbr\u003e13.4 Biotechnology\u003cbr\u003e13.4.1 Organic solvents in microbial production processes\u003cbr\u003eMichiaki Matsumoto, Sonja Isken, Jan A. M. de Bont, Division of Industrial Microbiology Department of Food Technology and Nutritional Sciences, Wageningen University, Wageningen, The Netherlands\u003cbr\u003e13.4.2 Solvent-resistant microorganisms\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany\u003cbr\u003e13.4.3 Choice of solvent for enzymatic reaction in organic solvent\u003cbr\u003eTsuneo Yamane, Graduate School of Bio- and Agro-Sciences, Nagoya University, Nagoya, Japan\u003cbr\u003e13.5 Coil coating\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.6 Cosmetics and personal care products\u003cbr\u003e13.7 Dry cleaning - treatment of textiles in solvents\u003cbr\u003eKaspar D. Hasenclever, Kreussler \u0026amp; Co. GmbH, Wiesbaden, Germany\u003cbr\u003e13.8 Fabricated metal products\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.9 Food industry - solvents for extracting vegetable oils\u003cbr\u003ePhillip J. Wakelyn, National Cotton Council, Washington, DC, USA; Peter J. Wan, USDA, ARS, SRRC, New Orleans, LA, USA\u003cbr\u003e13.10 Ground transportation\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.11 Inorganic chemical industry\u003cbr\u003e13.12 Iron and steel industry\u003cbr\u003e13.13 Lumber and wood products - Wood preservation treatment: significance of solvents\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany; Gerhard Volland, Otto-Graf-Institut, Universitaet Stuttgart, Stuttgart, Germany\u003cbr\u003e13.14 Medical applications\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.15 Metal casting\u003cbr\u003e13.16 Motor vehicle assembly\u003cbr\u003e13.17 Organic chemical industry\u003cbr\u003e13.18 Paints and coatings\u003cbr\u003e13.18.1 Architectural surface coatings and solvents\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany; Gerhard Volland, Otto-Graf-Institut, Universitaet Stuttgart, Stuttgart, Germany\u003cbr\u003e13.18.2 Recent advances in coalescing solvents for waterborne coatings\u003cbr\u003eDavid Randall, Chemoxy International pcl, Cleveland, United Kingdom\u003cbr\u003e13.19 Petroleum refining industry\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.20 Pharmaceutical industry\u003cbr\u003e13.20.1 Use of solvents in the manufacture of drug substances (DS) and drug products (DP)\u003cbr\u003eMichel Bauer, International Analytical Department, Sanofi-Synthelabo, Toulouse, France; Christine Barthelemy, Laboratoire de Pharmacie Galenique et Biopharmacie, Faculte des Sciences Pharmaceutiques et Biologiques, Universite de Lille 2, Lille, France\u003cbr\u003e13.20.2 Predicting cosolvency for pharmaceutical and environmental applications\u003cbr\u003eAn Li, School of Public Health, University of Illinois at Chicago, Chicago, IL, USA\u003cbr\u003e13.21 Polymers and man-made fibers\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.22 Printing industry\u003cbr\u003e13.23 Pulp and paper\u003cbr\u003e13.24 Rubber and Plastics\u003cbr\u003e13.25 Use of solvents in the shipbuilding and ship repair industry\u003cbr\u003eMohamed Serageldin, U.S. Environmental Protection Agency, Research Triangle Park, NC, USA; Dave Reeves, Midwest Research Institute, Cary, NC, USA\u003cbr\u003e13.26 Stone, clay, glass, and concrete\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e13.27 Textile industry\u003cbr\u003e13.28 Transportation equipment cleaning\u003cbr\u003e13.29 Water transportation\u003cbr\u003e13.30 Wood furniture\u003cbr\u003e13.31 Summary\u003cbr\u003e\u003cbr\u003e14 METHODS OF SOLVENT DETECTION AND TESTING\u003cbr\u003e14.1 Standard methods of solvent analysis\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e14.2 Special methods of solvent analysis\u003cbr\u003eMyrto Petreas, California Environmental Protection Agency, Berkeley, USA\u003cbr\u003e\u003cbr\u003e15 RESIDUAL SOLVENTS IN PRODUCTS\u003cbr\u003e15.1 Residual solvents in various products\u003cbr\u003eGeorge Wypych, ChemTec Laboratories, Toronto, Canada\u003cbr\u003e15.2 Residual solvents in pharmaceutical substances and products\u003cbr\u003eEric Deconinck and Bart Desmedt\u003cbr\u003e\u003cbr\u003e16 ENVIRONMENTAL IMPACT OF SOLVENTS\u003cbr\u003e16.1 The environmental chemistry of organic solvents\u003cbr\u003eWilliam R. Roy, USA\u003cbr\u003e16.2 The environmental chemistry of ionic liquids\u003cbr\u003eWilliam R. Roy, USA\u003cbr\u003e16.3 Organic solvent impacts on tropospheric air pollution\u003cbr\u003eMichelle Bergin, Armistead Russell, Georgia Institute of Technology, Atlanta, Georgia, USA\u003cbr\u003e\u003cbr\u003e17 CONCENTRATION OF SOLVENTS IN VARIOUS INDUSTRIAL ENVIRONMENTS\u003cbr\u003e17.1 Measurement and estimation of solvents emission and odor\u003cbr\u003eMargot Scheithauer, Institut fuer Holztechnologie Dresden, Germany\u003cbr\u003e17.2 Emission of organic solvents during usage of ecological paints\u003cbr\u003eKrzysztof M. Benczek, Joanna Kurpiewska, Central Institute for Labor Protection, Warsaw, Poland\u003cbr\u003e17.3 Solvent levels in the vehicle collision repair industry\u003cbr\u003eSamuel Keer, Centre for Public Health Research, Wellington, New Zealand\u003cbr\u003e\u003cbr\u003e18 REGULATIONS\u003cbr\u003e18 Regulations in US and other countries\u003cbr\u003eCarlos M. Nunez, U.S. Environmental Protection Agency, National Risk Management Research Laboratory Research, Triangle Park, NC, USA\u003cbr\u003e18.1 Regulations in Europe\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, Institut fuer Allgemeine Hygiene und Umwelthygiene, Universitaet Tuebingen, Tuebingen, Germany\u003cbr\u003e19 TOXIC EFFECTS OF SOLVENT EXPOSURE\u003cbr\u003e19.1 Toxicokinetics, toxicodynamics, and toxicology\u003cbr\u003eTilman Hahn, Konrad Botzenhart, Fritz Schweinsberg, University of Tuebingen, Tuebingen, Germany\u003cbr\u003e19.2 Solvent exposure in pregnancy\u003cbr\u003eSC Mitchell, Computational and Systems Medicine, Imperial College, London, UK and RH Waring\u003cbr\u003eSchool of Biosciences, University of Birmingham, UK \u003cbr\u003e19.3 Nephrotoxicity of industrial solvents\u003cbr\u003eNachman Brautbar and Michael P. Wu, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.4 Lymphohematopoietic malignancies among workers exposed to benzene including leukemia, lymphoma, and multiple myeloma\u003cbr\u003eNachman Brautbar, Michael P. Wu, Alexandra E. Rieders, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.5 Genotoxicity of benzene\u003cbr\u003eNachman Brautbar, Michael P. Wu, Alexandra E. Rieders, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.6 Chromosomal aberrations and sister chromatoid exchanges\u003cbr\u003eNachman Brautbar, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.7 Hepatotoxicity of industrial solvents\u003cbr\u003eNachman Brautbar and Michael P. Wu, University of Southern California, School of Medicine, Department of Medicine, Los Angeles, CA, USA and Nachman Brautbar, M.D., Inc., Los Angeles, CA, USA\u003cbr\u003e19.8 Toxicity of environmental solvent exposure for brain, lung and heart\u003cbr\u003eKaye H. Kilburn, School of Medicine, University of Southern California, Los Angeles, CA, USA\u003cbr\u003e\u003cbr\u003e20 SUBSTITUTION OF SOLVENTS BY SAFER PRODUCTS AND PROCESSES\u003cbr\u003e20.1 Supercritical solvents\u003cbr\u003eAydin K. Sunol, Sermin G. Sunol, Department of Chemical Engineering, University of South Florida, Tampa, FL, USA\u003cbr\u003e20.2 Ionic liquids\u003cbr\u003eD.W. Rooney and Johan Jacquemin, School of Chemistry, The Queen’s University of Belfast, Belfast, Northern Ireland\u003cbr\u003e20.3 Deep eutectic solvents and their applications as new green reaction media\u003cbr\u003eJoaquin Garcia-Alvarez, Universidad de Oviedo, Spain\u003cbr\u003e20.4 Novel applications of the bio-based solvent ethyl lactate in chemical technology\u003cbr\u003eDavid Villanueva-Bermejo, Department of Agricultural, Food and Nutritional Science, \u003cbr\u003eUniversity of Alberta, Edmonton, Alberta, Canada and Tiziana Fornari, Instituto de Investigación en Ciencias de la Alimentación, Universidad Autonoma de Madrid, Madrid, Spain\u003cbr\u003e\u003cbr\u003e21 SOLVENT RECYCLING, REMOVAL, AND DEGRADATION\u003cbr\u003e21.1 Absorptive solvent recovery\u003cbr\u003eKlaus-Dirk Henning, CarboTech Aktivkohlen GmbH, Essen, Germany\u003cbr\u003e21.2 Recovery versus incineration\u003cbr\u003eDanilo Alexander Figueroa Paredes and José Espinosa. INGAR, Avellaneda, Argentina and Antonio Amelio, Department of Environment, Land and Infrastructure Engineering), Politecnico di Torino, Torino, Italy \u003cbr\u003e21.3 Solvent recovery, recycling, and incineration\u003cbr\u003eGeorge Wypych\u003cbr\u003eChemTec Laboratories, Toronto, Canada\u003cbr\u003e21.4 Application of solar photocatalytic oxidation to VOC-containing airstreams\u003cbr\u003eK. A. Magrini, A. S. Watt, L. C. Boyd, E. J. Wolfrum, S. A. Larson,C. Roth, G. C. Glatzmaier, National Renewable Energy Laboratory, Golden, CO, USA\u003cbr\u003e\u003cbr\u003e22 NATURAL ATTENUATION OF CHLORINATED SOLVENTS IN GROUND WATER\u003cbr\u003eHanadi S. Rifai, Civil and Environmental Engineering, University of Houston, Houston, Texas, USA; Groundwater Services, Inc., Houston, Texas, USA; Charles J. Newell Todd H. Wiedemeier, Parson Engineering Science, Denver, CO, USA\u003cbr\u003eMoffett Field, CA\u003cbr\u003e\u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e"}