- Grid List
Filter
Description Author: Myer Kutz ISBN 978-1-4377-3455-3 896 pages, Hardcover Summary Key FeaturesThe Handbook’s broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete, wood and textiles. For each type of material, the book describes the kind of degradation that effects it and how...
$250.00
in stock
{"id":11242224132,"title":"Handbook of Environmental Degradation of Materials, 2nd Edition","handle":"978-1-4377-3455-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Myer Kutz \u003cbr\u003eISBN 978-1-4377-3455-3 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e896 pages, Hardcover\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cb\u003eKey Features\u003c\/b\u003eThe Handbook’s broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete, wood and textiles.\n\u003cli\u003eFor each type of material, the book describes the kind of degradation that effects it and how best to protect it.\u003c\/li\u003e\n\u003cli\u003eCase Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects.\u003c\/li\u003e\nNothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications.\n\u003cp\u003eThe Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eReadership\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEngineers: Civil, Mechanical, Materials, Design, Maintenance, Chemical \u0026amp; Process \u003c\/p\u003e\n\u003cp\u003eIndustries: construction \/ civil engineering, automotive \/ aerospace \/ transportation, chemical processing, consumer packaging, paints and coatings, petrochemical, pipeline, plastics.\u003c\/p\u003e\n\u003cp\u003eLevel: Practicing engineers and technicians, students seeking real-world examples and applied techniques.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPart I: Analysis\u003cbr\u003e\u003cbr\u003e1) Analysis of Failures of Metallic Materials due to Environmental Factors\u003cbr\u003e\u003cbr\u003e2) Laboratory Assessment of Corrosion\u003cbr\u003e\u003cbr\u003e3) Modeling of Corrosion Processes\u003cbr\u003e\u003cbr\u003e4) Lifetime Predictions\u003cbr\u003e\u003cbr\u003ePart II: Types of Degradation\u003cbr\u003e\u003cbr\u003e5) Electrochemical Corrosion\u003cbr\u003e\u003cbr\u003e6) Localized Corrosion\u003cbr\u003e\u003cbr\u003e7) High-Temperature Oxidation\u003cbr\u003e\u003cbr\u003e8) Weathering of Plastics\u003cbr\u003e\u003cbr\u003e9) Chemical and Physical Aging of Polymers\u003cbr\u003e\u003cbr\u003e10) Thermal Degradation of Plastics\u003cbr\u003e\u003cbr\u003e11) Environmental Degradation of Reinforced Concrete\u003cbr\u003e\u003cbr\u003e12) Biofouling and prevention, and biodeterioration and biodegradation of materials\u003cbr\u003e\u003cbr\u003e(possibly split into two chapters, one on polymers, one on metals.)\u003cbr\u003e\u003cbr\u003e13) Material Flammability\u003cbr\u003e\u003cbr\u003e14) Fire Retardant Materials\u003cbr\u003e\u003cbr\u003ePart III: Protective Measures\u003cbr\u003e\u003cbr\u003e15) Cathodic Protection\u003cbr\u003e\u003cbr\u003e16) Thermal Protective Clothing\u003cbr\u003e\u003cbr\u003e17) Wood Protection\u003cbr\u003e\u003cbr\u003e18) Materials Selection for Environmental Degradation Prevention\u003cbr\u003e\u003cbr\u003ePart IV: Surface Engineering\u003cbr\u003e\u003cbr\u003e19) The Intersection of Design, Manufacturing, and Surface Engineering (updated to\u003cbr\u003e\u003cbr\u003einclude new coatings: (biomimetic, nanostructured and conductive polymers)\u003cbr\u003e\u003cbr\u003e20) Nanostructured Surfaces and Nanomaterial Coatings\u003cbr\u003e\u003cbr\u003e21) Protective Coatings for Aluminum Alloys\u003cbr\u003e\u003cbr\u003e22) Anti-Corrosion Paints\u003cbr\u003e\u003cbr\u003e23) Thermal and Environmental Barrier Coatings\u003cbr\u003e\u003cbr\u003e24) Thermay Spray Coatings\u003cbr\u003e\u003cbr\u003e25) Paint Weathering Tests\u003cbr\u003e\u003cbr\u003e26) Coatings for Concrete Surfaces: Testing and Modeling\u003cbr\u003e\u003cbr\u003e27) The importance of intrinsic defects in the protective behavior of coatings\u003cbr\u003e\u003cbr\u003e28) Plastics Additives for Environmental Stability\u003cbr\u003e\u003cbr\u003ePart V: Industrial Applications\u003cbr\u003e\u003cbr\u003e29) Degradation of Spacecraft Materials\u003cbr\u003e\u003cbr\u003e30) Cathodic Protection for Pipelines\u003cbr\u003e\u003cbr\u003e31) Tanker Corrosion\u003cbr\u003e\u003cbr\u003e32) Barrier Packaging Materials\u003cbr\u003e\u003cbr\u003e33) Corrosion prevention and control programs for chemical processing equipment\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nMyer Kutz, Myer Kutz Associates. Inc., Delmar, NY, USA","published_at":"2017-06-22T21:13:55-04:00","created_at":"2017-06-22T21:13:55-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2012","book","ceramics","degradation","environment","material","p-properties","polymer","polymers","textiles","wood"],"price":25000,"price_min":25000,"price_max":25000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378383044,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Environmental Degradation of Materials, 2nd Edition","public_title":null,"options":["Default Title"],"price":25000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-4377-3455-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-4377-3455-3.jpg?v=1499725620"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4377-3455-3.jpg?v=1499725620","options":["Title"],"media":[{"alt":null,"id":354810495069,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4377-3455-3.jpg?v=1499725620"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4377-3455-3.jpg?v=1499725620","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Myer Kutz \u003cbr\u003eISBN 978-1-4377-3455-3 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e896 pages, Hardcover\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cb\u003eKey Features\u003c\/b\u003eThe Handbook’s broad scope introduces the reader to the effects of environmental degradation on a wide range of materials, including metals, plastics, concrete, wood and textiles.\n\u003cli\u003eFor each type of material, the book describes the kind of degradation that effects it and how best to protect it.\u003c\/li\u003e\n\u003cli\u003eCase Studies show how organizations from small consulting firms to corporate giants design and manufacture products that are more resistant to environmental effects.\u003c\/li\u003e\nNothing stays the same for ever. The environmental degradation and corrosion of materials is inevitable and affects most aspects of life. In industrial settings, this inescapable fact has very significant financial, safety and environmental implications.\n\u003cp\u003eThe Handbook of Environmental Degradation of Materials explains how to measure, analyse, and control environmental degradation for a wide range of industrial materials including metals, polymers, ceramics, concrete, wood and textiles exposed to environmental factors such as weather, seawater, and fire. Divided into sections which deal with analysis, types of degradation, protection and surface engineering respectively, the reader is introduced to the wide variety of environmental effects and what can be done to control them. The expert contributors to this book provide a wealth of insider knowledge and engineering knowhow, complementing their explanations and advice with Case Studies from areas such as pipelines, tankers, packaging and chemical processing equipment ensures that the reader understands the practical measures that can be put in place to save money, lives and the environment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eReadership\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEngineers: Civil, Mechanical, Materials, Design, Maintenance, Chemical \u0026amp; Process \u003c\/p\u003e\n\u003cp\u003eIndustries: construction \/ civil engineering, automotive \/ aerospace \/ transportation, chemical processing, consumer packaging, paints and coatings, petrochemical, pipeline, plastics.\u003c\/p\u003e\n\u003cp\u003eLevel: Practicing engineers and technicians, students seeking real-world examples and applied techniques.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPart I: Analysis\u003cbr\u003e\u003cbr\u003e1) Analysis of Failures of Metallic Materials due to Environmental Factors\u003cbr\u003e\u003cbr\u003e2) Laboratory Assessment of Corrosion\u003cbr\u003e\u003cbr\u003e3) Modeling of Corrosion Processes\u003cbr\u003e\u003cbr\u003e4) Lifetime Predictions\u003cbr\u003e\u003cbr\u003ePart II: Types of Degradation\u003cbr\u003e\u003cbr\u003e5) Electrochemical Corrosion\u003cbr\u003e\u003cbr\u003e6) Localized Corrosion\u003cbr\u003e\u003cbr\u003e7) High-Temperature Oxidation\u003cbr\u003e\u003cbr\u003e8) Weathering of Plastics\u003cbr\u003e\u003cbr\u003e9) Chemical and Physical Aging of Polymers\u003cbr\u003e\u003cbr\u003e10) Thermal Degradation of Plastics\u003cbr\u003e\u003cbr\u003e11) Environmental Degradation of Reinforced Concrete\u003cbr\u003e\u003cbr\u003e12) Biofouling and prevention, and biodeterioration and biodegradation of materials\u003cbr\u003e\u003cbr\u003e(possibly split into two chapters, one on polymers, one on metals.)\u003cbr\u003e\u003cbr\u003e13) Material Flammability\u003cbr\u003e\u003cbr\u003e14) Fire Retardant Materials\u003cbr\u003e\u003cbr\u003ePart III: Protective Measures\u003cbr\u003e\u003cbr\u003e15) Cathodic Protection\u003cbr\u003e\u003cbr\u003e16) Thermal Protective Clothing\u003cbr\u003e\u003cbr\u003e17) Wood Protection\u003cbr\u003e\u003cbr\u003e18) Materials Selection for Environmental Degradation Prevention\u003cbr\u003e\u003cbr\u003ePart IV: Surface Engineering\u003cbr\u003e\u003cbr\u003e19) The Intersection of Design, Manufacturing, and Surface Engineering (updated to\u003cbr\u003e\u003cbr\u003einclude new coatings: (biomimetic, nanostructured and conductive polymers)\u003cbr\u003e\u003cbr\u003e20) Nanostructured Surfaces and Nanomaterial Coatings\u003cbr\u003e\u003cbr\u003e21) Protective Coatings for Aluminum Alloys\u003cbr\u003e\u003cbr\u003e22) Anti-Corrosion Paints\u003cbr\u003e\u003cbr\u003e23) Thermal and Environmental Barrier Coatings\u003cbr\u003e\u003cbr\u003e24) Thermay Spray Coatings\u003cbr\u003e\u003cbr\u003e25) Paint Weathering Tests\u003cbr\u003e\u003cbr\u003e26) Coatings for Concrete Surfaces: Testing and Modeling\u003cbr\u003e\u003cbr\u003e27) The importance of intrinsic defects in the protective behavior of coatings\u003cbr\u003e\u003cbr\u003e28) Plastics Additives for Environmental Stability\u003cbr\u003e\u003cbr\u003ePart V: Industrial Applications\u003cbr\u003e\u003cbr\u003e29) Degradation of Spacecraft Materials\u003cbr\u003e\u003cbr\u003e30) Cathodic Protection for Pipelines\u003cbr\u003e\u003cbr\u003e31) Tanker Corrosion\u003cbr\u003e\u003cbr\u003e32) Barrier Packaging Materials\u003cbr\u003e\u003cbr\u003e33) Corrosion prevention and control programs for chemical processing equipment\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nMyer Kutz, Myer Kutz Associates. Inc., Delmar, NY, USA"}
Description Author: George Wypych ISBN 978-1-895198-41-6 Figures: 578Tables: 190Pages: 774Third Edition Summary This handbook gives direct comparison of general purpose fillers (micron-size fillers) and nanofillers.Over 3,000 research papers, mostly published from 1994 to 2009 (over 1500 new papers in this edition), technical data from over 160 filler and equipment manufacturing companies, and patent literature were reviewed...
$285.00
in stock
{"id":11242220868,"title":"Handbook of Fillers","handle":"978-1-895198-41-6","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych \u003cbr\u003eISBN 978-1-895198-41-6 \u003cbr\u003e\u003cbr\u003eFigures: 578\u003cbr\u003eTables: 190\u003cbr\u003ePages: 774\u003cbr\u003eThird Edition\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis handbook gives direct comparison of general purpose fillers (micron-size fillers) and nanofillers.\u003cbr\u003eOver 3,000 research papers, mostly published from 1994 to 2009 (over 1500 new papers in this edition), technical data from over 160 filler and equipment manufacturing companies, and patent literature were reviewed for this comprehensive handbook. \u003cbr\u003e The book is designed to be single source of information for an experienced practitioner as well as a reference text for students and those new to the fields where fillers are used. The previous edition, used by very large number of readers, does not contain essential developments of extensive research on fillers in the last 10 years, especially related to nanofillers. \u003cbr\u003e Fillers, in most applications, are no longer used as cost-saving additives but they add value to final products, and many products cannot be successfully designed without them. This reference book is a powerful tool for today’s challenges, which can only be met by those equipped with extensive information. \u003cbr\u003e The book provides the information on three groups of relevant topics: available fillers and their properties, their effect on filled materials, and their use in practical applications. \u003cbr\u003e One third of the book covers the grades of fillers available in the world market. Fillers are divided into 83 groups and their properties are analyzed to pinpoint properties, applications, and sources. The technical information is a synthesis of information on several thousand grades of fillers manufactured today. The morphology of fillers, in addition to the numerical and other data, is illustrated by 154 SEM TEM, AFM micrographs.\u003cbr\u003e The second part of the handbook discusses the effects of filler incorporation. Ten chapters cover the mechanical properties of compounded materials, the effect of the filler on material rheology, the morphology of the filled system, the material durability, flammability and recycling, the structure of interphase, chemical interactions, interaction with and effect on other additives, fillers use in material combinations, and the analytical methods of testing fillers and filled materials.\u003cbr\u003e The last part of the book is concerned with application of fillers on an industrial scale. Several chapters discuss filler transportation, storage, processing and equipment used for these purposes. Others deal with the quality control of fillers, formulation with fillers, different processing methods, groups of products, and health and safety issues. \u003cbr\u003e This book is designed to assist industrial engineers to evaluate advances in the processing technology. It is also invaluable for chemists who design formulations for industrial processes and students in chemical engineering who must learn how modern industry operates in practical applications. The handbook is invaluable for sales and marketing because it gives possibility of direct comparison of fillers and their potential use and contains all required information to position them in the marketplace. The previous edition was very popular among environmental engineers, patent and litigation lawyers, and employees of various governmental agencies. \u003cbr\u003e To summarize, major features of this handbook are:\u003cbr\u003e• Comprehensive review of literature\u003cbr\u003e• The most current information\u003cbr\u003e• Information required by scientists, engineers, marketing, sales, and students given in one source\u003cbr\u003e• All aspects of filler properties, effects, and application thoroughly reviewed\u003cbr\u003e• Contains all available information to make decision on what can be done by traditional fillers and where nanotechnology excels \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003e1 INTRODUCTION\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e1.1 Expectations from fillers\u003cbr\u003e1.2 Typical filler properties\u003cbr\u003e1.3 Definitions\u003cbr\u003e1.4 Classification\u003cbr\u003e1.5 Markets and trends\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2 SOURCES OF FILLERS, THEIR CHEMICAL COMPOSITION, PROPERTIES, AND MORPHOLOGY \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e2.1 Particulate Fillers \u003cbr\u003e2.1.1 Aluminum flakes and powders\u003cbr\u003e2.1.2 Aluminum borate whiskers\u003cbr\u003e2.1.3 Aluminum oxide \u003cbr\u003e2.1.4 Aluminum trihydroxide\u003cbr\u003e2.1.5 Anthracite\u003cbr\u003e2.1.6 Antimonate of sodium\u003cbr\u003e2.1.7 Antimony pentoxide\u003cbr\u003e2.1.8 Antimony trioxide\u003cbr\u003e2.1.9 Ammonium octamolybdate\u003cbr\u003e2.1.10 Apatite\u003cbr\u003e2.1.11 Ash, fly\u003cbr\u003e2.1.12 Attapulgite\u003cbr\u003e2.1.13 Barium metaborate\u003cbr\u003e2.1.14 Barium sulfate\u003cbr\u003e2.1.15 Barium \u0026amp; strontium sulfates\u003cbr\u003e2.1.16 Barium titanate\u003cbr\u003e2.1.17 Bentonite\u003cbr\u003e2.1.18 Beryllium oxide\u003cbr\u003e2.1.19 Boron nitride\u003cbr\u003e2.1.20 Calcium carbonate\u003cbr\u003e2.1.21 Calcium hydroxide\u003cbr\u003e2.1.22 Calcium sulfate\u003cbr\u003e2.1.23 Carbon black \u003cbr\u003e2.1.24 Ceramic beads\u003cbr\u003e2.1.25 Clay\u003cbr\u003e2.1.26 Copper\u003cbr\u003e2.1.27 Cobalt powder\u003cbr\u003e2.1.28 Cristobalite\u003cbr\u003e2.1.29 Diatomaceous earth\u003cbr\u003e2.1.30 Dolomite\u003cbr\u003e2.1.31 Ferrites\u003cbr\u003e2.1.32 Feldspar\u003cbr\u003e2.1.33 Glass beads\u003cbr\u003e2.1.34 Gold\u003cbr\u003e2.1.35 Graphite\u003cbr\u003e2.1.36 Hydrous calcium silicate\u003cbr\u003e2.1.37 Iron oxide \u003cbr\u003e2.1.38 Kaolin \u003cbr\u003e2.1.39 Lithopone \u003cbr\u003e2.1.40 Magnesium oxide \u003cbr\u003e2.1.41 Magnesium hydroxide \u003cbr\u003e2.1.42 Metal-containing conductive materials\u003cbr\u003e2.1.43 Mica\u003cbr\u003e2.1.44 Molybdenum\u003cbr\u003e2.1.45 Molybdenum disulfide\u003cbr\u003e2.1.46 Molybdic oxide\u003cbr\u003e2.1.47 Nanofillers\u003cbr\u003e2.1.48 Nickel\u003cbr\u003e2.1.49 Nickel oxide\u003cbr\u003e2.1.50 Nickel zinc ferrite\u003cbr\u003e2.1.51 Perlite\u003cbr\u003e2.1.52 Polymeric fillers\u003cbr\u003e2.1.53 Potassium hexatitanate whiskers\u003cbr\u003e2.1.54 Pumice\u003cbr\u003e2.1.55 Pyrophyllite\u003cbr\u003e2.1.56 Rubber particles\u003cbr\u003e2.1.57 Sepiolite\u003cbr\u003e2.1.58 Silica \u003cbr\u003e2.1.58.1 Fumed silica\u003cbr\u003e2.1.58.2 Fused silica \u003cbr\u003e2.1.58.3 Precipitated silica\u003cbr\u003e2.1.58.4 Nanosilica\u003cbr\u003e2.1.58.5 Quartz (Tripoli) \u003cbr\u003e2.1.58.6 Sand \u003cbr\u003e2.1.58.7 Silica gel\u003cbr\u003e2.1.59 Silicon carbide\u003cbr\u003e2.1.60 Silicon nitride\u003cbr\u003e2.1.61 Silver powder and flakes\u003cbr\u003e2.1.62 Slate flour \u003cbr\u003e2.1.63 Talc \u003cbr\u003e2.1.64 Titanium dioxide\u003cbr\u003e2.1.65 Tungsten \u003cbr\u003e2.1.66 Vermiculite \u003cbr\u003e2.1.67 Wollastonite \u003cbr\u003e2.1.68 Wood flour and similar materials\u003cbr\u003e2.1.69 Zeolites \u003cbr\u003e2.1.70 Zinc borate \u003cbr\u003e2.1.71 Zinc oxide \u003cbr\u003e2.1.72 Zinc stannate \u003cbr\u003e2.1.73 Zinc sulfide \u003cbr\u003e2.2 Fibers \u003cbr\u003e2.2.1 Aramid fibers\u003cbr\u003e2.2.2 Carbon fibers \u003cbr\u003e2.2.3 Cellulose fibers \u003cbr\u003e2.2.4 Glass fibers \u003cbr\u003e2.2.5 Other fibers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3 FILLERS TRANSPORTATION, STORAGE, AND PROCESSING\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e3.1 Filler packaging\u003cbr\u003e3.2 External transportation\u003cbr\u003e3.3 Filler receiving \u003cbr\u003e3.4 Storage \u003cbr\u003e3.5 In-plant conveying \u003cbr\u003e3.6 Semi-bulk unloading systems\u003cbr\u003e3.7 Bag handling equipment \u003cbr\u003e3.8 Blending \u003cbr\u003e3.9 Feeding \u003cbr\u003e3.10 Drying \u003cbr\u003e3.11 Dispersion \u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 QUALITY CONTROL OF FILLERS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4.1 Absorption coefficient\u003cbr\u003e4.2 Acidity or alkalinity of water extract\u003cbr\u003e4.3 Ash content \u003cbr\u003e4.4 Brightness \u003cbr\u003e4.5 Coarse particles\u003cbr\u003e4.6 Color \u003cbr\u003e4.7 CTAB surface area\u003cbr\u003e4.8 Density \u003cbr\u003e4.9 Electrical properties\u003cbr\u003e4.10 Extractables \u003cbr\u003e4.11 Fines content \u003cbr\u003e4.12 Heating loss \u003cbr\u003e4.13 Heat stability \u003cbr\u003e4.14 Hegman fineness \u003cbr\u003e4.15 Hiding power \u003cbr\u003e4.16 Iodine absorption number \u003cbr\u003e4.17 Lightening power of white pigments\u003cbr\u003e4.18 Loss on ignition \u003cbr\u003e4.19 Mechanical and related properties\u003cbr\u003e4.20 Oil absorption \u003cbr\u003e4.21 Particle size \u003cbr\u003e4.22 Pellet strength \u003cbr\u003e4.23 pH \u003cbr\u003e4.24 Resistance to light\u003cbr\u003e4.25 Resistivity of aqueous extract \u003cbr\u003e4.26 Sieve residue\u003cbr\u003e4.27 Soluble matter \u003cbr\u003e4.28 Specific surface area\u003cbr\u003e4.29 Sulfur content \u003cbr\u003e4.30 Tamped volume \u003cbr\u003e4.31 Tinting strength \u003cbr\u003e4.32 Volatile matter \u003cbr\u003e4.33 Water content \u003cbr\u003e4.34 Water-soluble sulfates, chlorides and nitrates\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 PHYSICAL PROPERTIES OF FILLERS AND FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e5.1 Density\u003cbr\u003e5.2 Particle size\u003cbr\u003e5.3 Particle size distribution\u003cbr\u003e5.4 Particle shape \u003cbr\u003e5.5 Particle surface morphology and roughness\u003cbr\u003e5.6 Specific surface area \u003cbr\u003e5.7 Porosity \u003cbr\u003e5.8 Particle-particle interaction and spacing\u003cbr\u003e5.9 Agglomerates \u003cbr\u003e5.10 Aggregates and structure\u003cbr\u003e5.11 Flocculation and sedimentation\u003cbr\u003e5.12 Aspect ratio \u003cbr\u003e5.13 Packing volume \u003cbr\u003e5.14 pH\u003cbr\u003e5.15 Zeta-potential\u003cbr\u003e5.16 Surface energy\u003cbr\u003e5.17 Moisture \u003cbr\u003e5.18 Absorption of liquids and swelling\u003cbr\u003e5.19 Permeability and barrier properties \u003cbr\u003e5.20 Oil absorption \u003cbr\u003e5.21 Hydrophilic\/hydrophobic properties\u003cbr\u003e5.22 Optical properties \u003cbr\u003e5.23 Refractive index \u003cbr\u003e5.24 Friction properties \u003cbr\u003e5.25 Hardness \u003cbr\u003e5.26 Intumescent properties\u003cbr\u003e5.27 Thermal conductivity \u003cbr\u003e5.28 Thermal expansion coefficient\u003cbr\u003e5.29 Melting temperature \u003cbr\u003e5.30 Electrical properties \u003cbr\u003e5.31 Magnetic properties \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6 CHEMICAL PROPERTIES OF FILLERS AND FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e6.1 Reactivity\u003cbr\u003e6.2 Chemical groups on the filler surface\u003cbr\u003e6.3 Filler surface modification \u003cbr\u003e6.4 Filler modification and material properties\u003cbr\u003e6.5 Resistance to various chemicals \u003cbr\u003e6.6 Cure in fillers presence \u003cbr\u003e6.7 Polymerization in fillers presence\u003cbr\u003e6.8 Grafting \u003cbr\u003e6.9 Crosslink density \u003cbr\u003e6.10 Reaction kinetics \u003cbr\u003e6.11 Molecular mobility \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7 ORGANIZATION OF INTERFACE AND MATRIX CONTAINING FILLERS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e7.1 Particle distribution in matrix\u003cbr\u003e7.2 Orientation of filler particles in a matrix\u003cbr\u003e7.3 Voids \u003cbr\u003e7.4 Matrix-filler interaction\u003cbr\u003e7.5 Chemical interactions \u003cbr\u003e7.6 Other interactions \u003cbr\u003e7.7 Interphase organization\u003cbr\u003e7.8 Interfacial adhesion \u003cbr\u003e7.9 Interphase thickness \u003cbr\u003e7.10 Filler-chain links \u003cbr\u003e7.11 Chain dynamics \u003cbr\u003e7.12 Bound rubber \u003cbr\u003e7.13 Debonding \u003cbr\u003e7.14 Mechanisms of reinforcement \u003cbr\u003e7.15 Benefits of organization on molecular level\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8 THE EFFECT OF FILLERS ON THE MECHANICAL PROPERTIES OF FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e8.1 Tensile strength and elongation\u003cbr\u003e8.2 Tensile yield stress \u003cbr\u003e8.3 Elastic modulus \u003cbr\u003e8.4 Flexural strength and modulus \u003cbr\u003e8.5 Impact resistance \u003cbr\u003e8.6 Hardness \u003cbr\u003e8.7 Tear strength\u003cbr\u003e8.8 Compressive strength\u003cbr\u003e8.9 Fracture resistance \u003cbr\u003e8.10 Wear \u003cbr\u003e8.11 Friction \u003cbr\u003e8.12 Abrasion \u003cbr\u003e8.13 Scratch resistance\u003cbr\u003e8.14 Fatigue \u003cbr\u003e8.15 Failure \u003cbr\u003e8.16 Adhesion \u003cbr\u003e8.17 Thermal deformation\u003cbr\u003e8.18 Shrinkage \u003cbr\u003e8.19 Warpage \u003cbr\u003e8.20 Compression set\u003cbr\u003e8.21 Load transfer \u003cbr\u003e8.22 Residual stress \u003cbr\u003e8.23 Creep \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9 THE EFFECT OF FILLERS ON RHEOLOGICAL PROPERTIES OF FILLED MATERIALS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e9.1 Viscosity\u003cbr\u003e9.2 Flow \u003cbr\u003e9.3 Flow induced filler particle orientation\u003cbr\u003e9.4 Torque \u003cbr\u003e9.5 Viscoelasticity\u003cbr\u003e9.6 Dynamic mechanical behavior\u003cbr\u003e9.7 Complex viscosity \u003cbr\u003e9.8 Shear viscosity \u003cbr\u003e9.9 Elongational viscosity\u003cbr\u003e9.10 Melt rheology \u003cbr\u003e9.11 Yield value \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10 MORPHOLOGY OF FILLED SYSTEMS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e10.1 Crystallinity\u003cbr\u003e10.2 Crystallization behavior\u003cbr\u003e10.3 Nucleation \u003cbr\u003e10.4 Crystal size \u003cbr\u003e10.5 Spherulites \u003cbr\u003e10.6 Transcrystallinity\u003cbr\u003e10.7 Orientation \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11 EFFECT OF FILLERS ON EPOSURE TO DIFFERENT ENVIRONMENTS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e11.1 Irradiation\u003cbr\u003e11.2 UV radiation \u003cbr\u003e11.3 Temperature \u003cbr\u003e11.4 Liquids and vapors\u003cbr\u003e11.5 Stabilization \u003cbr\u003e11.6 Degradable materials\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e12 FLAMMABILITY OF FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e12.1 Definitions\u003cbr\u003e12.2 Limiting oxygen index\u003cbr\u003e12.3 Ignition and flame spread rate\u003cbr\u003e12.4 Heat transmission rate \u003cbr\u003e12.5 Decomposition and combustion\u003cbr\u003e12.6 Emission of gaseous components\u003cbr\u003e12.7 Smoke \u003cbr\u003e12.8 Char \u003cbr\u003e12.9 Recycling\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e13 INFLUENCE OF FILLERS ON PERFORMANCE OF OTHER ADDITIVES AND VICE VERSA \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e13.1 Adhesion promoters\u003cbr\u003e13.2 Antistatics \u003cbr\u003e13.3 Blowing agents \u003cbr\u003e13.4 Catalysts \u003cbr\u003e13.5 Compatibilizers\u003cbr\u003e13.6 Coupling agents \u003cbr\u003e13.7 Dispersing agents and surface active agents\u003cbr\u003e13.8 Flame retardants \u003cbr\u003e13.9 Impact modifiers \u003cbr\u003e13.10 UV stabilizers \u003cbr\u003e13.11 Other additives \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e14 TESTING METHODS IN FILLED SYSTEMS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e14.1 Physical methods\u003cbr\u003e14.1.1 Atomic force microscopy \u003cbr\u003e14.1.2 Autoignition test \u003cbr\u003e14.1.3 Bound rubber \u003cbr\u003e14.1.4 Char formation \u003cbr\u003e14.1.5 Cone calorimetry \u003cbr\u003e14.1.6 Contact angle \u003cbr\u003e14.1.7 Dispersing agent requirement\u003cbr\u003e14.1.8 Dispersion tests \u003cbr\u003e14.1.9 Dripping test \u003cbr\u003e14.1.10 Dynamic mechanical analysis\u003cbr\u003e14.1.11 Electric constants determination\u003cbr\u003e14.1.12 Electron microscopy \u003cbr\u003e14.1.13 Fiber orientation \u003cbr\u003e14.1.14 Flame propagation test\u003cbr\u003e14.1.15 Glow wire test \u003cbr\u003e14.1.16 Image analysis \u003cbr\u003e14.1.17 Limiting oxygen index\u003cbr\u003e14.1.18 Magnetic properties \u003cbr\u003e14.1.19 Optical microscopy \u003cbr\u003e14.1.20 Particle size analysis \u003cbr\u003e14.1.21 Radiant panel test \u003cbr\u003e14.1.22 Rate of combustion \u003cbr\u003e14.1.23 Scanning acoustic microscopy\u003cbr\u003e14.1.24 Smoke chamber \u003cbr\u003e14.1.25 Sonic methods \u003cbr\u003e14.1.26 Specific surface area\u003cbr\u003e14.1.27 Thermal analysis \u003cbr\u003e14.2 Chemical and instrumental analysis\u003cbr\u003e14.2.1 Electron spin resonance \u003cbr\u003e14.2.2 Electron spectroscopy for chemical analysis\u003cbr\u003e14.2.3 Inverse gas chromatography \u003cbr\u003e14.2.4 Gas chromatography \u003cbr\u003e14.2.5 Gel content \u003cbr\u003e14.2.6 Infrared and Raman spectroscopy\u003cbr\u003e14.2.7 Nuclear magnetic resonance spectroscopy\u003cbr\u003e14.2.8 UV and visible spectophotometry \u003cbr\u003e14.2.9 X-ray analysis \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e15 FILLERS IN COMMERCIAL POLYMERS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e15.1 Acrylics\u003cbr\u003e15.2 Acrylonitrile-butadiene-styrene copolymer\u003cbr\u003e15.3 Acrylonitrile-styrene-acrylate \u003cbr\u003e15.4 Aliphatic polyketone \u003cbr\u003e15.5 Alkyd resins \u003cbr\u003e15.6 Elastomers \u003cbr\u003e15.7 Epoxy resins \u003cbr\u003e15.8 Ethylene vinyl acetate copolymers \u003cbr\u003e15.9 Ethylene-ethyl acetate copolymer \u003cbr\u003e15.10 Ethylene-propylene copolymers \u003cbr\u003e15.11 Ionomers \u003cbr\u003e15.12 Liquid crystalline polymers\u003cbr\u003e15.13 Perfluoroalkoxy resin \u003cbr\u003e15.14 Phenolic resins \u003cbr\u003e15.15 Poly(acrylic acid) \u003cbr\u003e15.16 Polyamides \u003cbr\u003e15.17 Polyamideimide \u003cbr\u003e15.18 Polyamines \u003cbr\u003e15.19 Polyaniline \u003cbr\u003e15.20 Polyaryletherketone\u003cbr\u003e15.21 Poly(butylene terephthalate) \u003cbr\u003e15.22 Polycarbonate \u003cbr\u003e15.23 Polyetheretherketone\u003cbr\u003e15.24 Polyetherimide \u003cbr\u003e15.25 Polyether sulfone \u003cbr\u003e15.26 Polyethylene \u003cbr\u003e15.27 Polyethylene, chlorinated \u003cbr\u003e15.28 Polyethylene, chlorosulfonated \u003cbr\u003e15.29 Poly(ethylene oxide) \u003cbr\u003e15.30 Poly(ethylene terephthalate)\u003cbr\u003e15.31 Polyimide \u003cbr\u003e15.32 Polymethylmethacrylate\u003cbr\u003e15.33 Polyoxymethylene \u003cbr\u003e15.34 Poly(phenylene ether)\u003cbr\u003e15.35 Poly(phenylene sulfide) \u003cbr\u003e15.36 Polypropylene \u003cbr\u003e15.37 Polypyrrole \u003cbr\u003e15.38 Polystyrene \u0026amp; high impact \u003cbr\u003e15.39 Polysulfides \u003cbr\u003e15.40 Polysulfone \u003cbr\u003e15.41 Polytetrafluoroethylene\u003cbr\u003e15.42 Polyurethanes \u003cbr\u003e15.43 Poly(vinyl acetate)\u003cbr\u003e15.44 Poly(vinyl alcohol)\u003cbr\u003e15.45 Poly(vinyl butyral) \u003cbr\u003e15.46 Poly(vinyl chloride) \u003cbr\u003e15.47 Rubbers \u003cbr\u003e15.47.1 Natural rubber\u003cbr\u003e15.47.2 Nitrile rubber \u003cbr\u003e15.47.3 Polybutadiene rubber \u003cbr\u003e15.47.4 Polybutyl rubber \u003cbr\u003e15.47.5 Polychloroprene \u003cbr\u003e15.47.6 Polyisobutylene \u003cbr\u003e15.47.7 Polyisoprene \u003cbr\u003e15.47.8 Styrene-butadiene rubber\u003cbr\u003e15.48 Silicones \u003cbr\u003e15.49 Styrene-acrylonitrile copolymer\u003cbr\u003e15.50 Tetrafluoroethylene-perfluoropropylene\u003cbr\u003e15.51 Unsaturated polyesters \u003cbr\u003e15.52 Vinylidene-fluoride terpolymers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e16 FILLER IN MATERIALS COMBINATIONS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e16.1 Blends, alloys and interpenetrating networks\u003cbr\u003e16.2 Composites \u003cbr\u003e16.3 Nanocomposites \u003cbr\u003e16.4 Laminates \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e17 FORMULATION WITH FILLERS\u003c\/strong\u003e \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e18 FILLERS IN DIFFERENT PROCESSING METHODS\u003c\/strong\u003e \u003cbr\u003e18.1 Blow molding\u003cbr\u003e18.2 Calendering and hot-melt coating\u003cbr\u003e18.3 Compression molding \u003cbr\u003e18.4 Dip coating \u003cbr\u003e18.5 Dispersion \u003cbr\u003e18.6 Extrusion \u003cbr\u003e18.7 Foaming \u003cbr\u003e18.8 Injection molding\u003cbr\u003e18.9 Knife coating \u003cbr\u003e18.10 Mixing \u003cbr\u003e18.11 Pultrusion \u003cbr\u003e18.12 Reaction injection molding\u003cbr\u003e18.13 Rotational molding \u003cbr\u003e18.14 Sheet molding \u003cbr\u003e18.15 Thermoforming \u003cbr\u003e18.16 Welding and machining \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e19 FILLERS IN DIFFERENT PRODUCTS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e19.1 Adhesives \u003cbr\u003e19.2 Agriculture \u003cbr\u003e19.3 Aerospace\u003cbr\u003e19.4 Appliances \u003cbr\u003e19.5 Automotive materials \u003cbr\u003e19.6 Bottles and containers \u003cbr\u003e19.7 Building components \u003cbr\u003e19.8 Business machines \u003cbr\u003e19.9 Cable and wire \u003cbr\u003e19.10 Coated fabrics \u003cbr\u003e19.11 Coatings and paints\u003cbr\u003e19.12 Cosmetics and pharmaceutical products\u003cbr\u003e19.13 Dental restorative composites \u003cbr\u003e19.14 Electrical and electronic materials \u003cbr\u003e19.15 Electromagnetic interference shielding \u003cbr\u003e19.16 Fibers \u003cbr\u003e19.17 Film \u003cbr\u003e19.18 Foam \u003cbr\u003e19.19 Food and feed\u003cbr\u003e19.20 Friction materials\u003cbr\u003e19.21 Geosynthetics \u003cbr\u003e19.22 Hoses and pipes \u003cbr\u003e19.23 Magnetic devices \u003cbr\u003e19.24 Medical applications \u003cbr\u003e19.25 Membranes \u003cbr\u003e19.26 Noise damping \u003cbr\u003e19.27 Optical devices \u003cbr\u003e19.28 Paper \u003cbr\u003e19.29 Radiation shields\u003cbr\u003e19.30 Railway transportation \u003cbr\u003e19.31 Roofing \u003cbr\u003e19.32 Telecommunication\u003cbr\u003e19.33 Tires \u003cbr\u003e19.34 Sealants \u003cbr\u003e19.35 Siding \u003cbr\u003e19.36 Sports equipment \u003cbr\u003e19.37 Waterproofing \u003cbr\u003e19.38 Windows \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e20 HAZARDS IN FILLER USE\u003c\/strong\u003e \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 17 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st, 2nd and 3rd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives (1st and 2nd Editions), PVC Degradation \u0026amp; Stabilization, PVC Formulary, Handbook of UV Degradation and Stabilization, Handbook of Biodeterioration, Biodegradation and Biostabilization, and Handbook of Polymers (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability, and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education.","published_at":"2018-02-15T09:50:53-05:00","created_at":"2017-06-22T21:13:45-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2010","additives for plastics","book","calcium carbon","compounding of rubber","fillers additives","fillers and environment","flame retardanst for plastics","graphite","magnesium","mica","nanofillers","p-additives","particular fillers","physical properties","polymer","polymers","quality control","silica"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378372804,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Fillers","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-41-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-41-6.jpg?v=1499441992"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-41-6.jpg?v=1499441992","options":["Title"],"media":[{"alt":null,"id":355724558429,"position":1,"preview_image":{"aspect_ratio":0.667,"height":499,"width":333,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-41-6.jpg?v=1499441992"},"aspect_ratio":0.667,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-41-6.jpg?v=1499441992","width":333}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych \u003cbr\u003eISBN 978-1-895198-41-6 \u003cbr\u003e\u003cbr\u003eFigures: 578\u003cbr\u003eTables: 190\u003cbr\u003ePages: 774\u003cbr\u003eThird Edition\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis handbook gives direct comparison of general purpose fillers (micron-size fillers) and nanofillers.\u003cbr\u003eOver 3,000 research papers, mostly published from 1994 to 2009 (over 1500 new papers in this edition), technical data from over 160 filler and equipment manufacturing companies, and patent literature were reviewed for this comprehensive handbook. \u003cbr\u003e The book is designed to be single source of information for an experienced practitioner as well as a reference text for students and those new to the fields where fillers are used. The previous edition, used by very large number of readers, does not contain essential developments of extensive research on fillers in the last 10 years, especially related to nanofillers. \u003cbr\u003e Fillers, in most applications, are no longer used as cost-saving additives but they add value to final products, and many products cannot be successfully designed without them. This reference book is a powerful tool for today’s challenges, which can only be met by those equipped with extensive information. \u003cbr\u003e The book provides the information on three groups of relevant topics: available fillers and their properties, their effect on filled materials, and their use in practical applications. \u003cbr\u003e One third of the book covers the grades of fillers available in the world market. Fillers are divided into 83 groups and their properties are analyzed to pinpoint properties, applications, and sources. The technical information is a synthesis of information on several thousand grades of fillers manufactured today. The morphology of fillers, in addition to the numerical and other data, is illustrated by 154 SEM TEM, AFM micrographs.\u003cbr\u003e The second part of the handbook discusses the effects of filler incorporation. Ten chapters cover the mechanical properties of compounded materials, the effect of the filler on material rheology, the morphology of the filled system, the material durability, flammability and recycling, the structure of interphase, chemical interactions, interaction with and effect on other additives, fillers use in material combinations, and the analytical methods of testing fillers and filled materials.\u003cbr\u003e The last part of the book is concerned with application of fillers on an industrial scale. Several chapters discuss filler transportation, storage, processing and equipment used for these purposes. Others deal with the quality control of fillers, formulation with fillers, different processing methods, groups of products, and health and safety issues. \u003cbr\u003e This book is designed to assist industrial engineers to evaluate advances in the processing technology. It is also invaluable for chemists who design formulations for industrial processes and students in chemical engineering who must learn how modern industry operates in practical applications. The handbook is invaluable for sales and marketing because it gives possibility of direct comparison of fillers and their potential use and contains all required information to position them in the marketplace. The previous edition was very popular among environmental engineers, patent and litigation lawyers, and employees of various governmental agencies. \u003cbr\u003e To summarize, major features of this handbook are:\u003cbr\u003e• Comprehensive review of literature\u003cbr\u003e• The most current information\u003cbr\u003e• Information required by scientists, engineers, marketing, sales, and students given in one source\u003cbr\u003e• All aspects of filler properties, effects, and application thoroughly reviewed\u003cbr\u003e• Contains all available information to make decision on what can be done by traditional fillers and where nanotechnology excels \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003e1 INTRODUCTION\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e1.1 Expectations from fillers\u003cbr\u003e1.2 Typical filler properties\u003cbr\u003e1.3 Definitions\u003cbr\u003e1.4 Classification\u003cbr\u003e1.5 Markets and trends\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2 SOURCES OF FILLERS, THEIR CHEMICAL COMPOSITION, PROPERTIES, AND MORPHOLOGY \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e2.1 Particulate Fillers \u003cbr\u003e2.1.1 Aluminum flakes and powders\u003cbr\u003e2.1.2 Aluminum borate whiskers\u003cbr\u003e2.1.3 Aluminum oxide \u003cbr\u003e2.1.4 Aluminum trihydroxide\u003cbr\u003e2.1.5 Anthracite\u003cbr\u003e2.1.6 Antimonate of sodium\u003cbr\u003e2.1.7 Antimony pentoxide\u003cbr\u003e2.1.8 Antimony trioxide\u003cbr\u003e2.1.9 Ammonium octamolybdate\u003cbr\u003e2.1.10 Apatite\u003cbr\u003e2.1.11 Ash, fly\u003cbr\u003e2.1.12 Attapulgite\u003cbr\u003e2.1.13 Barium metaborate\u003cbr\u003e2.1.14 Barium sulfate\u003cbr\u003e2.1.15 Barium \u0026amp; strontium sulfates\u003cbr\u003e2.1.16 Barium titanate\u003cbr\u003e2.1.17 Bentonite\u003cbr\u003e2.1.18 Beryllium oxide\u003cbr\u003e2.1.19 Boron nitride\u003cbr\u003e2.1.20 Calcium carbonate\u003cbr\u003e2.1.21 Calcium hydroxide\u003cbr\u003e2.1.22 Calcium sulfate\u003cbr\u003e2.1.23 Carbon black \u003cbr\u003e2.1.24 Ceramic beads\u003cbr\u003e2.1.25 Clay\u003cbr\u003e2.1.26 Copper\u003cbr\u003e2.1.27 Cobalt powder\u003cbr\u003e2.1.28 Cristobalite\u003cbr\u003e2.1.29 Diatomaceous earth\u003cbr\u003e2.1.30 Dolomite\u003cbr\u003e2.1.31 Ferrites\u003cbr\u003e2.1.32 Feldspar\u003cbr\u003e2.1.33 Glass beads\u003cbr\u003e2.1.34 Gold\u003cbr\u003e2.1.35 Graphite\u003cbr\u003e2.1.36 Hydrous calcium silicate\u003cbr\u003e2.1.37 Iron oxide \u003cbr\u003e2.1.38 Kaolin \u003cbr\u003e2.1.39 Lithopone \u003cbr\u003e2.1.40 Magnesium oxide \u003cbr\u003e2.1.41 Magnesium hydroxide \u003cbr\u003e2.1.42 Metal-containing conductive materials\u003cbr\u003e2.1.43 Mica\u003cbr\u003e2.1.44 Molybdenum\u003cbr\u003e2.1.45 Molybdenum disulfide\u003cbr\u003e2.1.46 Molybdic oxide\u003cbr\u003e2.1.47 Nanofillers\u003cbr\u003e2.1.48 Nickel\u003cbr\u003e2.1.49 Nickel oxide\u003cbr\u003e2.1.50 Nickel zinc ferrite\u003cbr\u003e2.1.51 Perlite\u003cbr\u003e2.1.52 Polymeric fillers\u003cbr\u003e2.1.53 Potassium hexatitanate whiskers\u003cbr\u003e2.1.54 Pumice\u003cbr\u003e2.1.55 Pyrophyllite\u003cbr\u003e2.1.56 Rubber particles\u003cbr\u003e2.1.57 Sepiolite\u003cbr\u003e2.1.58 Silica \u003cbr\u003e2.1.58.1 Fumed silica\u003cbr\u003e2.1.58.2 Fused silica \u003cbr\u003e2.1.58.3 Precipitated silica\u003cbr\u003e2.1.58.4 Nanosilica\u003cbr\u003e2.1.58.5 Quartz (Tripoli) \u003cbr\u003e2.1.58.6 Sand \u003cbr\u003e2.1.58.7 Silica gel\u003cbr\u003e2.1.59 Silicon carbide\u003cbr\u003e2.1.60 Silicon nitride\u003cbr\u003e2.1.61 Silver powder and flakes\u003cbr\u003e2.1.62 Slate flour \u003cbr\u003e2.1.63 Talc \u003cbr\u003e2.1.64 Titanium dioxide\u003cbr\u003e2.1.65 Tungsten \u003cbr\u003e2.1.66 Vermiculite \u003cbr\u003e2.1.67 Wollastonite \u003cbr\u003e2.1.68 Wood flour and similar materials\u003cbr\u003e2.1.69 Zeolites \u003cbr\u003e2.1.70 Zinc borate \u003cbr\u003e2.1.71 Zinc oxide \u003cbr\u003e2.1.72 Zinc stannate \u003cbr\u003e2.1.73 Zinc sulfide \u003cbr\u003e2.2 Fibers \u003cbr\u003e2.2.1 Aramid fibers\u003cbr\u003e2.2.2 Carbon fibers \u003cbr\u003e2.2.3 Cellulose fibers \u003cbr\u003e2.2.4 Glass fibers \u003cbr\u003e2.2.5 Other fibers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3 FILLERS TRANSPORTATION, STORAGE, AND PROCESSING\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e3.1 Filler packaging\u003cbr\u003e3.2 External transportation\u003cbr\u003e3.3 Filler receiving \u003cbr\u003e3.4 Storage \u003cbr\u003e3.5 In-plant conveying \u003cbr\u003e3.6 Semi-bulk unloading systems\u003cbr\u003e3.7 Bag handling equipment \u003cbr\u003e3.8 Blending \u003cbr\u003e3.9 Feeding \u003cbr\u003e3.10 Drying \u003cbr\u003e3.11 Dispersion \u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 QUALITY CONTROL OF FILLERS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4.1 Absorption coefficient\u003cbr\u003e4.2 Acidity or alkalinity of water extract\u003cbr\u003e4.3 Ash content \u003cbr\u003e4.4 Brightness \u003cbr\u003e4.5 Coarse particles\u003cbr\u003e4.6 Color \u003cbr\u003e4.7 CTAB surface area\u003cbr\u003e4.8 Density \u003cbr\u003e4.9 Electrical properties\u003cbr\u003e4.10 Extractables \u003cbr\u003e4.11 Fines content \u003cbr\u003e4.12 Heating loss \u003cbr\u003e4.13 Heat stability \u003cbr\u003e4.14 Hegman fineness \u003cbr\u003e4.15 Hiding power \u003cbr\u003e4.16 Iodine absorption number \u003cbr\u003e4.17 Lightening power of white pigments\u003cbr\u003e4.18 Loss on ignition \u003cbr\u003e4.19 Mechanical and related properties\u003cbr\u003e4.20 Oil absorption \u003cbr\u003e4.21 Particle size \u003cbr\u003e4.22 Pellet strength \u003cbr\u003e4.23 pH \u003cbr\u003e4.24 Resistance to light\u003cbr\u003e4.25 Resistivity of aqueous extract \u003cbr\u003e4.26 Sieve residue\u003cbr\u003e4.27 Soluble matter \u003cbr\u003e4.28 Specific surface area\u003cbr\u003e4.29 Sulfur content \u003cbr\u003e4.30 Tamped volume \u003cbr\u003e4.31 Tinting strength \u003cbr\u003e4.32 Volatile matter \u003cbr\u003e4.33 Water content \u003cbr\u003e4.34 Water-soluble sulfates, chlorides and nitrates\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 PHYSICAL PROPERTIES OF FILLERS AND FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e5.1 Density\u003cbr\u003e5.2 Particle size\u003cbr\u003e5.3 Particle size distribution\u003cbr\u003e5.4 Particle shape \u003cbr\u003e5.5 Particle surface morphology and roughness\u003cbr\u003e5.6 Specific surface area \u003cbr\u003e5.7 Porosity \u003cbr\u003e5.8 Particle-particle interaction and spacing\u003cbr\u003e5.9 Agglomerates \u003cbr\u003e5.10 Aggregates and structure\u003cbr\u003e5.11 Flocculation and sedimentation\u003cbr\u003e5.12 Aspect ratio \u003cbr\u003e5.13 Packing volume \u003cbr\u003e5.14 pH\u003cbr\u003e5.15 Zeta-potential\u003cbr\u003e5.16 Surface energy\u003cbr\u003e5.17 Moisture \u003cbr\u003e5.18 Absorption of liquids and swelling\u003cbr\u003e5.19 Permeability and barrier properties \u003cbr\u003e5.20 Oil absorption \u003cbr\u003e5.21 Hydrophilic\/hydrophobic properties\u003cbr\u003e5.22 Optical properties \u003cbr\u003e5.23 Refractive index \u003cbr\u003e5.24 Friction properties \u003cbr\u003e5.25 Hardness \u003cbr\u003e5.26 Intumescent properties\u003cbr\u003e5.27 Thermal conductivity \u003cbr\u003e5.28 Thermal expansion coefficient\u003cbr\u003e5.29 Melting temperature \u003cbr\u003e5.30 Electrical properties \u003cbr\u003e5.31 Magnetic properties \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6 CHEMICAL PROPERTIES OF FILLERS AND FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e6.1 Reactivity\u003cbr\u003e6.2 Chemical groups on the filler surface\u003cbr\u003e6.3 Filler surface modification \u003cbr\u003e6.4 Filler modification and material properties\u003cbr\u003e6.5 Resistance to various chemicals \u003cbr\u003e6.6 Cure in fillers presence \u003cbr\u003e6.7 Polymerization in fillers presence\u003cbr\u003e6.8 Grafting \u003cbr\u003e6.9 Crosslink density \u003cbr\u003e6.10 Reaction kinetics \u003cbr\u003e6.11 Molecular mobility \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7 ORGANIZATION OF INTERFACE AND MATRIX CONTAINING FILLERS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e7.1 Particle distribution in matrix\u003cbr\u003e7.2 Orientation of filler particles in a matrix\u003cbr\u003e7.3 Voids \u003cbr\u003e7.4 Matrix-filler interaction\u003cbr\u003e7.5 Chemical interactions \u003cbr\u003e7.6 Other interactions \u003cbr\u003e7.7 Interphase organization\u003cbr\u003e7.8 Interfacial adhesion \u003cbr\u003e7.9 Interphase thickness \u003cbr\u003e7.10 Filler-chain links \u003cbr\u003e7.11 Chain dynamics \u003cbr\u003e7.12 Bound rubber \u003cbr\u003e7.13 Debonding \u003cbr\u003e7.14 Mechanisms of reinforcement \u003cbr\u003e7.15 Benefits of organization on molecular level\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8 THE EFFECT OF FILLERS ON THE MECHANICAL PROPERTIES OF FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e8.1 Tensile strength and elongation\u003cbr\u003e8.2 Tensile yield stress \u003cbr\u003e8.3 Elastic modulus \u003cbr\u003e8.4 Flexural strength and modulus \u003cbr\u003e8.5 Impact resistance \u003cbr\u003e8.6 Hardness \u003cbr\u003e8.7 Tear strength\u003cbr\u003e8.8 Compressive strength\u003cbr\u003e8.9 Fracture resistance \u003cbr\u003e8.10 Wear \u003cbr\u003e8.11 Friction \u003cbr\u003e8.12 Abrasion \u003cbr\u003e8.13 Scratch resistance\u003cbr\u003e8.14 Fatigue \u003cbr\u003e8.15 Failure \u003cbr\u003e8.16 Adhesion \u003cbr\u003e8.17 Thermal deformation\u003cbr\u003e8.18 Shrinkage \u003cbr\u003e8.19 Warpage \u003cbr\u003e8.20 Compression set\u003cbr\u003e8.21 Load transfer \u003cbr\u003e8.22 Residual stress \u003cbr\u003e8.23 Creep \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9 THE EFFECT OF FILLERS ON RHEOLOGICAL PROPERTIES OF FILLED MATERIALS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e9.1 Viscosity\u003cbr\u003e9.2 Flow \u003cbr\u003e9.3 Flow induced filler particle orientation\u003cbr\u003e9.4 Torque \u003cbr\u003e9.5 Viscoelasticity\u003cbr\u003e9.6 Dynamic mechanical behavior\u003cbr\u003e9.7 Complex viscosity \u003cbr\u003e9.8 Shear viscosity \u003cbr\u003e9.9 Elongational viscosity\u003cbr\u003e9.10 Melt rheology \u003cbr\u003e9.11 Yield value \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10 MORPHOLOGY OF FILLED SYSTEMS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e10.1 Crystallinity\u003cbr\u003e10.2 Crystallization behavior\u003cbr\u003e10.3 Nucleation \u003cbr\u003e10.4 Crystal size \u003cbr\u003e10.5 Spherulites \u003cbr\u003e10.6 Transcrystallinity\u003cbr\u003e10.7 Orientation \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11 EFFECT OF FILLERS ON EPOSURE TO DIFFERENT ENVIRONMENTS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e11.1 Irradiation\u003cbr\u003e11.2 UV radiation \u003cbr\u003e11.3 Temperature \u003cbr\u003e11.4 Liquids and vapors\u003cbr\u003e11.5 Stabilization \u003cbr\u003e11.6 Degradable materials\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e12 FLAMMABILITY OF FILLED MATERIALS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e12.1 Definitions\u003cbr\u003e12.2 Limiting oxygen index\u003cbr\u003e12.3 Ignition and flame spread rate\u003cbr\u003e12.4 Heat transmission rate \u003cbr\u003e12.5 Decomposition and combustion\u003cbr\u003e12.6 Emission of gaseous components\u003cbr\u003e12.7 Smoke \u003cbr\u003e12.8 Char \u003cbr\u003e12.9 Recycling\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e13 INFLUENCE OF FILLERS ON PERFORMANCE OF OTHER ADDITIVES AND VICE VERSA \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e13.1 Adhesion promoters\u003cbr\u003e13.2 Antistatics \u003cbr\u003e13.3 Blowing agents \u003cbr\u003e13.4 Catalysts \u003cbr\u003e13.5 Compatibilizers\u003cbr\u003e13.6 Coupling agents \u003cbr\u003e13.7 Dispersing agents and surface active agents\u003cbr\u003e13.8 Flame retardants \u003cbr\u003e13.9 Impact modifiers \u003cbr\u003e13.10 UV stabilizers \u003cbr\u003e13.11 Other additives \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e14 TESTING METHODS IN FILLED SYSTEMS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e14.1 Physical methods\u003cbr\u003e14.1.1 Atomic force microscopy \u003cbr\u003e14.1.2 Autoignition test \u003cbr\u003e14.1.3 Bound rubber \u003cbr\u003e14.1.4 Char formation \u003cbr\u003e14.1.5 Cone calorimetry \u003cbr\u003e14.1.6 Contact angle \u003cbr\u003e14.1.7 Dispersing agent requirement\u003cbr\u003e14.1.8 Dispersion tests \u003cbr\u003e14.1.9 Dripping test \u003cbr\u003e14.1.10 Dynamic mechanical analysis\u003cbr\u003e14.1.11 Electric constants determination\u003cbr\u003e14.1.12 Electron microscopy \u003cbr\u003e14.1.13 Fiber orientation \u003cbr\u003e14.1.14 Flame propagation test\u003cbr\u003e14.1.15 Glow wire test \u003cbr\u003e14.1.16 Image analysis \u003cbr\u003e14.1.17 Limiting oxygen index\u003cbr\u003e14.1.18 Magnetic properties \u003cbr\u003e14.1.19 Optical microscopy \u003cbr\u003e14.1.20 Particle size analysis \u003cbr\u003e14.1.21 Radiant panel test \u003cbr\u003e14.1.22 Rate of combustion \u003cbr\u003e14.1.23 Scanning acoustic microscopy\u003cbr\u003e14.1.24 Smoke chamber \u003cbr\u003e14.1.25 Sonic methods \u003cbr\u003e14.1.26 Specific surface area\u003cbr\u003e14.1.27 Thermal analysis \u003cbr\u003e14.2 Chemical and instrumental analysis\u003cbr\u003e14.2.1 Electron spin resonance \u003cbr\u003e14.2.2 Electron spectroscopy for chemical analysis\u003cbr\u003e14.2.3 Inverse gas chromatography \u003cbr\u003e14.2.4 Gas chromatography \u003cbr\u003e14.2.5 Gel content \u003cbr\u003e14.2.6 Infrared and Raman spectroscopy\u003cbr\u003e14.2.7 Nuclear magnetic resonance spectroscopy\u003cbr\u003e14.2.8 UV and visible spectophotometry \u003cbr\u003e14.2.9 X-ray analysis \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e15 FILLERS IN COMMERCIAL POLYMERS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e15.1 Acrylics\u003cbr\u003e15.2 Acrylonitrile-butadiene-styrene copolymer\u003cbr\u003e15.3 Acrylonitrile-styrene-acrylate \u003cbr\u003e15.4 Aliphatic polyketone \u003cbr\u003e15.5 Alkyd resins \u003cbr\u003e15.6 Elastomers \u003cbr\u003e15.7 Epoxy resins \u003cbr\u003e15.8 Ethylene vinyl acetate copolymers \u003cbr\u003e15.9 Ethylene-ethyl acetate copolymer \u003cbr\u003e15.10 Ethylene-propylene copolymers \u003cbr\u003e15.11 Ionomers \u003cbr\u003e15.12 Liquid crystalline polymers\u003cbr\u003e15.13 Perfluoroalkoxy resin \u003cbr\u003e15.14 Phenolic resins \u003cbr\u003e15.15 Poly(acrylic acid) \u003cbr\u003e15.16 Polyamides \u003cbr\u003e15.17 Polyamideimide \u003cbr\u003e15.18 Polyamines \u003cbr\u003e15.19 Polyaniline \u003cbr\u003e15.20 Polyaryletherketone\u003cbr\u003e15.21 Poly(butylene terephthalate) \u003cbr\u003e15.22 Polycarbonate \u003cbr\u003e15.23 Polyetheretherketone\u003cbr\u003e15.24 Polyetherimide \u003cbr\u003e15.25 Polyether sulfone \u003cbr\u003e15.26 Polyethylene \u003cbr\u003e15.27 Polyethylene, chlorinated \u003cbr\u003e15.28 Polyethylene, chlorosulfonated \u003cbr\u003e15.29 Poly(ethylene oxide) \u003cbr\u003e15.30 Poly(ethylene terephthalate)\u003cbr\u003e15.31 Polyimide \u003cbr\u003e15.32 Polymethylmethacrylate\u003cbr\u003e15.33 Polyoxymethylene \u003cbr\u003e15.34 Poly(phenylene ether)\u003cbr\u003e15.35 Poly(phenylene sulfide) \u003cbr\u003e15.36 Polypropylene \u003cbr\u003e15.37 Polypyrrole \u003cbr\u003e15.38 Polystyrene \u0026amp; high impact \u003cbr\u003e15.39 Polysulfides \u003cbr\u003e15.40 Polysulfone \u003cbr\u003e15.41 Polytetrafluoroethylene\u003cbr\u003e15.42 Polyurethanes \u003cbr\u003e15.43 Poly(vinyl acetate)\u003cbr\u003e15.44 Poly(vinyl alcohol)\u003cbr\u003e15.45 Poly(vinyl butyral) \u003cbr\u003e15.46 Poly(vinyl chloride) \u003cbr\u003e15.47 Rubbers \u003cbr\u003e15.47.1 Natural rubber\u003cbr\u003e15.47.2 Nitrile rubber \u003cbr\u003e15.47.3 Polybutadiene rubber \u003cbr\u003e15.47.4 Polybutyl rubber \u003cbr\u003e15.47.5 Polychloroprene \u003cbr\u003e15.47.6 Polyisobutylene \u003cbr\u003e15.47.7 Polyisoprene \u003cbr\u003e15.47.8 Styrene-butadiene rubber\u003cbr\u003e15.48 Silicones \u003cbr\u003e15.49 Styrene-acrylonitrile copolymer\u003cbr\u003e15.50 Tetrafluoroethylene-perfluoropropylene\u003cbr\u003e15.51 Unsaturated polyesters \u003cbr\u003e15.52 Vinylidene-fluoride terpolymers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e16 FILLER IN MATERIALS COMBINATIONS\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e16.1 Blends, alloys and interpenetrating networks\u003cbr\u003e16.2 Composites \u003cbr\u003e16.3 Nanocomposites \u003cbr\u003e16.4 Laminates \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e17 FORMULATION WITH FILLERS\u003c\/strong\u003e \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e18 FILLERS IN DIFFERENT PROCESSING METHODS\u003c\/strong\u003e \u003cbr\u003e18.1 Blow molding\u003cbr\u003e18.2 Calendering and hot-melt coating\u003cbr\u003e18.3 Compression molding \u003cbr\u003e18.4 Dip coating \u003cbr\u003e18.5 Dispersion \u003cbr\u003e18.6 Extrusion \u003cbr\u003e18.7 Foaming \u003cbr\u003e18.8 Injection molding\u003cbr\u003e18.9 Knife coating \u003cbr\u003e18.10 Mixing \u003cbr\u003e18.11 Pultrusion \u003cbr\u003e18.12 Reaction injection molding\u003cbr\u003e18.13 Rotational molding \u003cbr\u003e18.14 Sheet molding \u003cbr\u003e18.15 Thermoforming \u003cbr\u003e18.16 Welding and machining \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e19 FILLERS IN DIFFERENT PRODUCTS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e19.1 Adhesives \u003cbr\u003e19.2 Agriculture \u003cbr\u003e19.3 Aerospace\u003cbr\u003e19.4 Appliances \u003cbr\u003e19.5 Automotive materials \u003cbr\u003e19.6 Bottles and containers \u003cbr\u003e19.7 Building components \u003cbr\u003e19.8 Business machines \u003cbr\u003e19.9 Cable and wire \u003cbr\u003e19.10 Coated fabrics \u003cbr\u003e19.11 Coatings and paints\u003cbr\u003e19.12 Cosmetics and pharmaceutical products\u003cbr\u003e19.13 Dental restorative composites \u003cbr\u003e19.14 Electrical and electronic materials \u003cbr\u003e19.15 Electromagnetic interference shielding \u003cbr\u003e19.16 Fibers \u003cbr\u003e19.17 Film \u003cbr\u003e19.18 Foam \u003cbr\u003e19.19 Food and feed\u003cbr\u003e19.20 Friction materials\u003cbr\u003e19.21 Geosynthetics \u003cbr\u003e19.22 Hoses and pipes \u003cbr\u003e19.23 Magnetic devices \u003cbr\u003e19.24 Medical applications \u003cbr\u003e19.25 Membranes \u003cbr\u003e19.26 Noise damping \u003cbr\u003e19.27 Optical devices \u003cbr\u003e19.28 Paper \u003cbr\u003e19.29 Radiation shields\u003cbr\u003e19.30 Railway transportation \u003cbr\u003e19.31 Roofing \u003cbr\u003e19.32 Telecommunication\u003cbr\u003e19.33 Tires \u003cbr\u003e19.34 Sealants \u003cbr\u003e19.35 Siding \u003cbr\u003e19.36 Sports equipment \u003cbr\u003e19.37 Waterproofing \u003cbr\u003e19.38 Windows \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e20 HAZARDS IN FILLER USE\u003c\/strong\u003e \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 17 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st, 2nd and 3rd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives (1st and 2nd Editions), PVC Degradation \u0026amp; Stabilization, PVC Formulary, Handbook of UV Degradation and Stabilization, Handbook of Biodeterioration, Biodegradation and Biostabilization, and Handbook of Polymers (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability, and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education."}
Description Author: George Wypych ISBN 978-1-895198-91-1 Published: 2016Figures: 615 Tables: 190 Pages: 922 Fourth Edition Summary This handbook gives direct comparison of general purpose fillers (micron-size fillers) and nanofillers.Over 4,000 research papers, mostly published from 1994 to 2015 (over 1000 new papers in this edition), technical data from over 200 filler and equipment manufacturing companies,...
$350.00
in stock
{"id":11242221188,"title":"Handbook of Fillers, 4th Edition","handle":"978-1-895198-91-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych \u003cbr\u003eISBN 978-1-895198-91-1 \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan\u003ePublished: 2016\u003cbr\u003e\u003c\/span\u003eFigures: 615\u003c\/div\u003e\n\u003cdiv\u003eTables: 190\u003c\/div\u003e\n\u003cdiv\u003ePages: 922\u003c\/div\u003e\n\u003cdiv\u003eFourth Edition\u003c\/div\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis handbook gives direct comparison of general purpose fillers (micron-size fillers) and nanofillers.\u003cbr\u003e\u003cbr\u003eOver 4,000 research papers, mostly published from 1994 to 2015 (over 1000 new papers in this edition), technical data from over 200 filler and equipment manufacturing companies, and patent literature were reviewed for this comprehensive handbook. \u003cbr\u003e\u003cbr\u003eThe book is designed to be single source of information for an experienced practitioner as well as a reference text for students and those new to the fields where fillers are used. The previous editions, used by very large number of readers, does not contain essential developments of extensive research on fillers in the last 10 years, especially related to nanofillers, graphene and other novelty products. \u003cbr\u003e\u003cbr\u003eFillers, in most applications, are no longer used as cost-saving additives but they add value to final products, and many products cannot be successfully designed without them. This reference book is a powerful tool for today’s challenges, which can only be met by those equipped with extensive information. \u003cbr\u003e\u003cbr\u003eThe book provides the information on three groups of relevant topics: available fillers and their properties, their effect on filled materials, and their use in practical applications. \u003cbr\u003e\u003cbr\u003eOne third of the book covers the grades of fillers available in the world market. Fillers are divided into 83 groups and their properties are analyzed to pinpoint properties, applications, and sources. The technical information is a synthesis of information on several thousand grades of fillers manufactured today. The morphology of fillers, in addition to the numerical and other data, is illustrated by over 200 SEM TEM, AFM micrographs.\u003cbr\u003e\u003cbr\u003eThe second part of the handbook discusses the effects of filler incorporation. Ten chapters cover the mechanical properties of compounded materials, the effect of the filler on material rheology, the morphology of the filled system, the material durability, flammability and recycling, the structure of interphase, chemical interactions, interaction with and effect on other additives, fillers use in material combinations, and the analytical methods of testing fillers and filled materials.\u003cbr\u003e\u003cbr\u003eThe last part of the book is concerned with application of fillers on an industrial scale. Several chapters discuss filler transportation, storage, processing and equipment used for these purposes. Others deal with the quality control of fillers, formulation with fillers, different processing methods, groups of products, and health and safety issues. This part is designed to assist industrial engineers to evaluate advances in the processing technology. It is also invaluable for chemists who design formulations for industrial processes and students in chemical engineering who must learn how modern industry operates in practical applications. The handbook is invaluable for sales and marketing because it gives possibility of direct comparison of fillers and their potential use and contains all required information to position them in the marketplace.\u003cbr\u003e\u003cbr\u003eTo summarize, major features of this handbook are:\u003cbr\u003e\u003cbr\u003e• Comprehensive review of literature\u003cbr\u003e• The most current information\u003cbr\u003e• Information required by scientists, engineers, marketing, sales, and students given in one source\u003cbr\u003e• All aspects of filler properties, effects, and application thoroughly reviewed\u003cbr\u003e• Contains all available information to make decision on what can be done by traditional fillers and where nanotechnology excels\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION \u003cbr\u003e1.1 Expectations from fillers \u003cbr\u003e1.2 Typical filler properties \u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification \u003cbr\u003e1.5 Markets and trends \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e2 SOURCES OF FILLERS, THEIR CHEMICAL COMPOSITION, PROPERTIES, AND MORPHOLOGY \u003cbr\u003e2.1 Particulate Fillers \u003cbr\u003e2.1.1 Aluminum flakes and powders \u003cbr\u003e2.1.2 Aluminum borate whiskers \u003cbr\u003e2.1.3 Aluminum nitride \u003cbr\u003e2.1.4 Aluminum oxide \u003cbr\u003e2.1.5 Aluminum trihydroxide \u003cbr\u003e2.1.6 Anthracite \u003cbr\u003e2.1.7 Antimonate of sodium \u003cbr\u003e2.1.8 Antimony pentoxide \u003cbr\u003e2.1.8 Antimony trioxide \u003cbr\u003e2.1.10 Ammonium octamolybdate \u003cbr\u003e2.1.11 Apatite \u003cbr\u003e2.1.12 Ash, fly \u003cbr\u003e2.1.13 Attapulgite \u003cbr\u003e2.1.14 Barium metaborate \u003cbr\u003e2.1.15 Barium sulfate \u003cbr\u003e2.1.16 Barium \u0026amp; strontium sulfates \u003cbr\u003e2.1.17 Barium titanate \u003cbr\u003e2.1.18 Bentonite \u003cbr\u003e2.1.19 Beryllium oxide \u003cbr\u003e2.1.20 Boron nitride \u003cbr\u003e2.1.21 Calcium carbonate \u003cbr\u003e2.1.22 Calcium fluoride \u003cbr\u003e2.1.23 Calcium hydroxide \u003cbr\u003e2.1.24 Calcium phosphate \u003cbr\u003e2.1.25 Calcium silicate \u003cbr\u003e2.1.26 Calcium sulfate \u003cbr\u003e2.1.27 Carbon black \u003cbr\u003e2.1.28 Carbonyl iron powder \u003cbr\u003e2.1.29 Cellulose particles \u003cbr\u003e2.1.30 Ceramic beads \u003cbr\u003e2.1.31 Chitosan \u003cbr\u003e2.1.32 Clamshell powder \u003cbr\u003e2.1.33 Clay \u003cbr\u003e2.1.34 Cobalt powder \u003cbr\u003e2.1.35 Copper \u003cbr\u003e2.1.36 Corn cob powder \u003cbr\u003e2.1.37 Cristobalite \u003cbr\u003e2.1.38 Diatomaceous earth \u003cbr\u003e2.1.39 Dolomite \u003cbr\u003e2.1.40 Eggshell filler \u003cbr\u003e2.1.41 Ferrites \u003cbr\u003e2.1.42 Feldspar \u003cbr\u003e2.1.43 Gandolinium oxide \u003cbr\u003e2.1.44 Glass beads \u003cbr\u003e2.1.45 Gold \u003cbr\u003e2.1.46 Graphene \u003cbr\u003e2.1.47 Graphene oxide \u003cbr\u003e2.1.48 Graphite \u003cbr\u003e2.1.49 Ground tire powder \u003cbr\u003e2.1.50 Halloysite \u003cbr\u003e2.1.51 Huntite \u003cbr\u003e2.1.52 Hydrous calcium silicate \u003cbr\u003e2.1.53 Illite \u003cbr\u003e2.1.54 Iron \u003cbr\u003e2.1.55 Iron oxide \u003cbr\u003e2.1.56 Kaolin \u003cbr\u003e2.1.57 Lead oxide \u003cbr\u003e2.1.58 Lithopone \u003cbr\u003e2.1.59 Magnesium oxide \u003cbr\u003e2.1.60 Magnesium hydroxide \u003cbr\u003e2.1.61 Magnetite \u003cbr\u003e2.1.62 Metal-containing conductive materials \u003cbr\u003e2.1.63 Mica \u003cbr\u003e2.1.64 Molybdenum \u003cbr\u003e2.1.65 Molybdenum disulfide \u003cbr\u003e2.1.66 Molybdic oxide \u003cbr\u003e2.1.67 Nanofillers \u003cbr\u003e2.1.68 Nickel \u003cbr\u003e2.1.69 Nickel oxide \u003cbr\u003e2.1.70 Nickel zinc ferrite \u003cbr\u003e2.1.71 Nutshell powder \u003cbr\u003e2.1.72 Perlite \u003cbr\u003e2.1.73 Polymeric fillers \u003cbr\u003e2.1.74 Potassium hexatitanate whiskers \u003cbr\u003e2.1.75 Pumice \u003cbr\u003e2.1.76 Pyrophyllite \u003cbr\u003e2.1.77 Rubber particles \u003cbr\u003e2.1.78 Sepiolite \u003cbr\u003e2.1.79 Silica \u003cbr\u003e2.1.79.1 Fumed silica \u003cbr\u003e2.1.79.2 Fused silica \u003cbr\u003e2.1.79.3 Precipitated silica \u003cbr\u003e2.1.79.4 Quartz (Tripoli) \u003cbr\u003e2.1.79.5 Sand \u003cbr\u003e2.1.79.6 Silica gel \u003cbr\u003e2.1.80 Silicon carbide \u003cbr\u003e2.1.81 Silicon nitride \u003cbr\u003e2.1.82 Silver powder and flakes \u003cbr\u003e2.1.83 Slate flour \u003cbr\u003e2.1.84 Talc \u003cbr\u003e2.1.85 Titanium dioxide \u003cbr\u003e2.1.86 Tungsten \u003cbr\u003e2.1.87 Vermiculite \u003cbr\u003e2.1.88 Wollastonite \u003cbr\u003e2.1.89 Wood flour and similar materials \u003cbr\u003e2.1.90 Zeolites \u003cbr\u003e2.1.91 Zinc borate \u003cbr\u003e2.1.92 Zinc oxide \u003cbr\u003e2.1.93 Zinc stannate \u003cbr\u003e2.1.94 Zinc sulfide \u003cbr\u003e2.2 Fibers \u003cbr\u003e2.2.1 Aramid fibers \u003cbr\u003e2.2.2 Carbon fibers \u003cbr\u003e2.2.3 Carbon nanotubes \u003cbr\u003e2.2.4 Cellulose fibers \u003cbr\u003e2.2.5 Glass fibers \u003cbr\u003e2.2.6 Other fibers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e3 FILLERS TRANSPORTATION, STORAGE, AND PROCESSING \u003cbr\u003e3.1 Filler packaging \u003cbr\u003e3.2 External transportation \u003cbr\u003e3.3 Filler receiving \u003cbr\u003e3.4 Storage \u003cbr\u003e3.5 In-plant conveying \u003cbr\u003e3.6 Semi-bulk unloading systems \u003cbr\u003e3.7 Bag handling equipment \u003cbr\u003e3.8 Blending \u003cbr\u003e3.9 Feeding \u003cbr\u003e3.10 Drying \u003cbr\u003e3.11 Dispersion \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e4 QUALITY CONTROL OF FILLERS \u003cbr\u003e4.1 Absorption coefficient \u003cbr\u003e4.2 Acidity or alkalinity of water extract \u003cbr\u003e4.3 Ash content \u003cbr\u003e4.4 Brightness \u003cbr\u003e4.5 Coarse particles \u003cbr\u003e4.6 Color \u003cbr\u003e4.7 CTAB surface area \u003cbr\u003e4.8 Density \u003cbr\u003e4.9 Electrical properties \u003cbr\u003e4.10 Extractables \u003cbr\u003e4.11 Fines content \u003cbr\u003e4.12 Heating loss \u003cbr\u003e4.13 Heat stability \u003cbr\u003e4.14 Hegman fineness \u003cbr\u003e4.15 Hiding power \u003cbr\u003e4.16 Iodine absorption number \u003cbr\u003e4.17 Lightening power of white pigments \u003cbr\u003e4.18 Loss on ignition \u003cbr\u003e4.19 Mechanical and related properties \u003cbr\u003e4.20 Oil absorption \u003cbr\u003e4.21 Particle size \u003cbr\u003e4.22 Pellet strength \u003cbr\u003e4.23 pH \u003cbr\u003e4.24 Resistance to light \u003cbr\u003e4.25 Resistivity of aqueous extract \u003cbr\u003e4.26 Sieve residue \u003cbr\u003e4.27 Soluble matter \u003cbr\u003e4.28 Specific surface area \u003cbr\u003e4.29 Sulfur content \u003cbr\u003e4.30 Tamped volume \u003cbr\u003e4.31 Tinting strength \u003cbr\u003e4.32 Volatile matter \u003cbr\u003e4.33 Water content \u003cbr\u003e4.34 Water-soluble sulfates, chlorides and nitrates \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e5 PHYSICAL PROPERTIES OF FILLERS AND FILLED MATERIALS \u003cbr\u003e5.1 Density \u003cbr\u003e5.2 Particle size \u003cbr\u003e5.3 Particle size distribution \u003cbr\u003e5.4 Particle shape \u003cbr\u003e5.5 Particle surface morphology and roughness \u003cbr\u003e5.6 Specific surface area \u003cbr\u003e5.7 Porosity \u003cbr\u003e5.8 Particle-particle interaction and spacing \u003cbr\u003e5.9 Agglomerates \u003cbr\u003e5.10 Aggregates and structure \u003cbr\u003e5.11 Flocculation and sedimentation \u003cbr\u003e5.12 Aspect ratio \u003cbr\u003e5.13 Packing volume \u003cbr\u003e5.14 pH \u003cbr\u003e5.15 Zeta-potential \u003cbr\u003e5.16 Surface energy \u003cbr\u003e5.17 Moisture \u003cbr\u003e5.18 Absorption of liquids and swelling \u003cbr\u003e5.19 Permeability and barrier properties \u003cbr\u003e5.20 Oil absorption \u003cbr\u003e5.21 Hydrophilic\/hydrophobic properties \u003cbr\u003e5.22 Optical properties \u003cbr\u003e5.23 Refractive index \u003cbr\u003e5.24 Friction properties \u003cbr\u003e5.25 Hardness \u003cbr\u003e5.26 Intumescent properties \u003cbr\u003e5.27 Thermal conductivity \u003cbr\u003e5.28 Thermal expansion coefficient \u003cbr\u003e5.29 Thermal degradation \u003cbr\u003e5.30 Melting temperature \u003cbr\u003e5.31 Glass transition temperature \u003cbr\u003e5.32 Electrical properties \u003cbr\u003e5.33 Relative permittivity \u003cbr\u003e5.34 Electrical percolation \u003cbr\u003e5.35 EMI shielding \u003cbr\u003e5.36 Magnetic properties \u003cbr\u003e5.37 Shape memory \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e6 CHEMICAL PROPERTIES OF FILLERS AND FILLED MATERIALS \u003cbr\u003e6.1 Reactivity \u003cbr\u003e6.2 Chemical groups on the filler surface \u003cbr\u003e6.3 Filler surface modification \u003cbr\u003e6.4 Filler modification and material properties \u003cbr\u003e6.5 Resistance to various chemicals \u003cbr\u003e6.6 Cure in fillers presence \u003cbr\u003e6.7 Polymerization in fillers presence \u003cbr\u003e6.8 Grafting \u003cbr\u003e6.9 Crosslink density \u003cbr\u003e6.10 Reaction kinetics \u003cbr\u003e6.11 Molecular mobility \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e7 ORGANIZATION OF INTERFACE AND MATRIX CONTAINING FILLERS \u003cbr\u003e7.1 Particle distribution in matrix \u003cbr\u003e7.2 Orientation of filler particles in a matrix \u003cbr\u003e7.3 Voids \u003cbr\u003e7.4 Matrix-filler interaction \u003cbr\u003e7.5 Chemical interactions \u003cbr\u003e7.6 Other interactions \u003cbr\u003e7.7 Interphase organization \u003cbr\u003e7.8 Interfacial adhesion \u003cbr\u003e7.9 Interphase thickness \u003cbr\u003e7.10 Filler-chain links \u003cbr\u003e7.11 Chain dynamics \u003cbr\u003e7.12 Bound rubber \u003cbr\u003e7.13 Debonding \u003cbr\u003e7.14 Mechanisms of reinforcement \u003cbr\u003e7.15 Benefits of organization on molecular level \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e8 THE EFFECT OF FILLERS ON THE MECHANICAL PROPERTIES OF FILLED MATERIALS \u003cbr\u003e8.1 Tensile strength and elongation \u003cbr\u003e8.2 Tensile yield stress \u003cbr\u003e8.3 Mullins’ effect \u003cbr\u003e8.4 Elastic modulus \u003cbr\u003e8.5 Flexural strength and modulus \u003cbr\u003e8.6 Impact resistance \u003cbr\u003e8.7 Hardness \u003cbr\u003e8.8 Tear strength \u003cbr\u003e8.9 Compressive strength \u003cbr\u003e8.10 Fracture resistance \u003cbr\u003e8.11 Wear \u003cbr\u003e8.12 Friction \u003cbr\u003e8.13 Abrasion \u003cbr\u003e8.14 Scratch resistance \u003cbr\u003e8.15 Fatigue \u003cbr\u003e8.16 Failure \u003cbr\u003e8.17 Adhesion \u003cbr\u003e8.18 Thermal deformation \u003cbr\u003e8.19 Shrinkage \u003cbr\u003e8.20 Warpage \u003cbr\u003e8.21 Compression set \u003cbr\u003e8.22 Load transfer \u003cbr\u003e8.23 Residual stress \u003cbr\u003e8.24 \u003cbr\u003eCreep \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e9 THE EFFECT OF FILLERS ON RHEOLOGICAL PROPERTIES OF FILLED MATERIALS \u003cbr\u003e9.1 Viscosity \u003cbr\u003e9.2 Flow \u003cbr\u003e9.3 Flow induced filler particle orientation \u003cbr\u003e9.4 Torque \u003cbr\u003e9.5 Viscoelasticity \u003cbr\u003e9.6 Dynamic mechanical behavior \u003cbr\u003e9.7 Complex viscosity \u003cbr\u003e9.8 Shear viscosity \u003cbr\u003e9.9 Elongational viscosity \u003cbr\u003e9.10 Melt rheology \u003cbr\u003e9.11 Yield value \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e10 MORPHOLOGY OF FILLED SYSTEMS \u003cbr\u003e10.1 Crystallinity \u003cbr\u003e10.2 Crystallization behavior \u003cbr\u003e10.3 Nucleation \u003cbr\u003e10.4 Crystal size \u003cbr\u003e10.5 Spherulites \u003cbr\u003e10.6 Transcrystallinity \u003cbr\u003e10.7 Orientation \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e11 EFFECT OF FILLERS ON EPOSURE TO DIFFERENT ENVIRONMENTS \u003cbr\u003e11.1 Irradiation \u003cbr\u003e11.2 UV radiation \u003cbr\u003e11.3 Temperature \u003cbr\u003e11.4 Liquids and vapors \u003cbr\u003e11.5 Stabilization \u003cbr\u003e11.6 Degradable materials \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e12 FLAMMABILITY OF FILLED MATERIALS \u003cbr\u003e12.1 Definitions \u003cbr\u003e12.2 Limiting oxygen index \u003cbr\u003e12.3 Ignition and flame spread rate \u003cbr\u003e12.4 Heat transmission rate \u003cbr\u003e12.5 Decomposition and combustion \u003cbr\u003e12.6 Emission of gaseous components \u003cbr\u003e12.7 Smoke \u003cbr\u003e12.8 Char \u003cbr\u003e12.9 Recycling \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e13 INFLUENCE OF FILLERS ON PERFORMANCE OF OTHER ADDITIVES AND VICE VERSA \u003cbr\u003e13.1 Adhesion promoters \u003cbr\u003e13.2 Antistatics \u003cbr\u003e13.3 Blowing agents \u003cbr\u003e13.4 Catalysts \u003cbr\u003e13.5 Compatibilizers \u003cbr\u003e13.6 Coupling agents \u003cbr\u003e13.7 Dispersing agents and surface active agents \u003cbr\u003e13.8 Flame retardants \u003cbr\u003e13.9 Impact modifiers \u003cbr\u003e13.10 UV stabilizers \u003cbr\u003e13.11 Other additives \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e14 TESTING METHODS IN FILLED SYSTEMS \u003cbr\u003e14.1 Physical methods \u003cbr\u003e14.1.1 Atomic force microscopy \u003cbr\u003e14.1.2 Autoignition test \u003cbr\u003e14.1.3 Bound rubber \u003cbr\u003e14.1.4 Char formation \u003cbr\u003e14.1.5 Cone calorimetry \u003cbr\u003e14.1.6 Contact angle \u003cbr\u003e14.1.7 Dispersing agent requirement \u003cbr\u003e14.1.8 Dispersion tests \u003cbr\u003e14.1.9 Dripping test \u003cbr\u003e14.1.10 Dynamic mechanical analysis \u003cbr\u003e14.1.11 Electric constants determination \u003cbr\u003e14.1.12 Electron microscopy \u003cbr\u003e14.1.13 Fiber orientation \u003cbr\u003e14.1.14 Flame propagation test \u003cbr\u003e14.1.15 Glow wire test \u003cbr\u003e14.1.16 Image analysis \u003cbr\u003e14.1.17 Limiting oxygen index \u003cbr\u003e14.1.18 Magnetic properties \u003cbr\u003e14.1.19 Optical microscopy \u003cbr\u003e14.1.20 Particle size analysis \u003cbr\u003e14.1.21 Radiant panel test \u003cbr\u003e14.1.22 Rate of combustion \u003cbr\u003e14.1.23 Scanning acoustic microscopy \u003cbr\u003e14.1.24 Smoke chamber \u003cbr\u003e14.1.25 Sonic methods \u003cbr\u003e14.1.26 Specific surface area \u003cbr\u003e14.1.27 Thermal analysis \u003cbr\u003e14.2 Chemical and instrumental analysis \u003cbr\u003e14.2.1 Electron spin resonance \u003cbr\u003e14.2.2 Electron spectroscopy for chemical analysis \u003cbr\u003e14.2.3 Inverse gas chromatography \u003cbr\u003e14.2.4 Gas chromatography \u003cbr\u003e14.2.5 Gel content \u003cbr\u003e14.2.6 Infrared and Raman spectroscopy \u003cbr\u003e14.2.7 Nuclear magnetic resonance spectroscopy \u003cbr\u003e14.2.8 UV and visible spectophotometry \u003cbr\u003e14.2.9 X-ray analysis \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e15 FILLERS IN COMMERCIAL POLYMERS \u003cbr\u003e15.1 Acrylics \u003cbr\u003e15.2 Acrylonitrile-butadiene-styrene copolymer \u003cbr\u003e15.3 Acrylonitrile-styrene-acrylate \u003cbr\u003e15.4 Aliphatic polyketone \u003cbr\u003e15.5 Alkyd resins \u003cbr\u003e15.6 Bismaleimide \u003cbr\u003e15.7 Cellulose acetate \u003cbr\u003e15.8 Chitosan \u003cbr\u003e15.9 Elastomers \u003cbr\u003e15.10 Epoxy resins \u003cbr\u003e15.11 Ethylene vinyl acetate copolymer \u003cbr\u003e15.12 Ethylene vinyl alcohol copolymer \u003cbr\u003e15.13 Ethylene-ethyl acetate copolymer \u003cbr\u003e15.14 Ethylene-propylene copolymers \u003cbr\u003e15.15 Ionomers \u003cbr\u003e15.16 Liquid crystalline polymers \u003cbr\u003e15.17 Perfluoroalkoxy resin \u003cbr\u003e15.18 Phenolic resins \u003cbr\u003e15.19 Poly(acrylic acid) \u003cbr\u003e15.20 Polyacrylonitrile \u003cbr\u003e15.21 Polyamides \u003cbr\u003e15.22 Polyamideimide \u003cbr\u003e15.23 Polyamines \u003cbr\u003e15.24 Polyaniline \u003cbr\u003e15.25 Polyaryletherketone \u003cbr\u003e15.26 Poly(butylene succinate) \u003cbr\u003e15.27 Poly(butylene terephthalate) \u003cbr\u003e15.28 Polycaprolactone \u003cbr\u003e15.29 Polycarbonate \u003cbr\u003e15.30 Polydicyclopentadiene \u003cbr\u003e15.31 Polyetheretherketone \u003cbr\u003e15.32 Polyetherimide \u003cbr\u003e15.33 Polyether sulfone \u003cbr\u003e15.34 Polyethylene \u003cbr\u003e15.35 Polyethylene, chlorinated \u003cbr\u003e15.36 Polyethylene, chlorosulfonated \u003cbr\u003e15.37 Poly(ethylene oxide) \u003cbr\u003e15.38 Poly(ethylene terephthalate) \u003cbr\u003e15.39 Polyimide \u003cbr\u003e15.41 Polymethylmethacrylate \u003cbr\u003e15.42 Polyoxymethylene \u003cbr\u003e15.43 Poly(phenylene ether) \u003cbr\u003e15.44 Poly(phenylene sulfide) \u003cbr\u003e15.45 Polypropylene \u003cbr\u003e15.46 Polypyrrole \u003cbr\u003e15.47 Polystyrene \u0026amp; high impact \u003cbr\u003e15.48 Polysulfide \u003cbr\u003e15.49 Polysulfone \u003cbr\u003e15.50 Polytetrafluoroethylene \u003cbr\u003e15.51 Polyurethanes \u003cbr\u003e15.52 Poly(vinyl acetate) \u003cbr\u003e15.53 Poly(vinyl alcohol) \u003cbr\u003e15.54 Poly(vinyl butyral) \u003cbr\u003e15.55 Poly(vinyl chloride) \u003cbr\u003e15.56 Rubbers \u003cbr\u003e15.56.1 Natural rubber \u003cbr\u003e15.56.2 Nitrile rubber \u003cbr\u003e15.56.3 Polybutadiene rubber \u003cbr\u003e15.56.4 Polybutyl rubber \u003cbr\u003e15.56.5 Polychloroprene \u003cbr\u003e15.56.6 Polyisobutylene \u003cbr\u003e15.56.7 Polyisoprene \u003cbr\u003e15.56.8 Styrene-butadiene rubber \u003cbr\u003e15.57 Silicones \u003cbr\u003e15.58 Styrene-acrylonitrile copolymer \u003cbr\u003e15.59 Tetrafluoroethylene-perfluoropropylene \u003cbr\u003e15.60 Unsaturated polyesters \u003cbr\u003e15.61 Vinylidene-fluoride terpolymers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e16 FILLER IN MATERIALS COMBINATIONS \u003cbr\u003e16.1 Blends, alloys and interpenetrating networks \u003cbr\u003e16.2 Composites \u003cbr\u003e16.3 Nanocomposites \u003cbr\u003e16.4 Laminates \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e17 FORMULATION WITH FILLERS \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e18 FILLERS IN DIFFERENT PROCESSING METHODS \u003cbr\u003e18.1 Blow molding \u003cbr\u003e18.2 Calendering and hot-melt coating \u003cbr\u003e18.3 Compression molding \u003cbr\u003e18.4 Dip coating \u003cbr\u003e18.5 Dispersion \u003cbr\u003e18.6 Extrusion \u003cbr\u003e18.7 Foaming \u003cbr\u003e18.8 Injection molding \u003cbr\u003e18.9 Knife coating \u003cbr\u003e18.10 Mixing \u003cbr\u003e18.11 Pultrusion \u003cbr\u003e18.12 Reaction injection molding \u003cbr\u003e18.13 Resin transfer molding \u003cbr\u003e18.14 Rotational molding \u003cbr\u003e18.15 Sheet molding \u003cbr\u003e18.16 Spinning \u003cbr\u003e18.17 Thermoforming \u003cbr\u003e18.18 Welding and machining \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e19 FILLERS IN DIFFERENT PRODUCTS \u003cbr\u003e19.1 Adhesives \u003cbr\u003e19.2 Agriculture \u003cbr\u003e19.3 Aerospace \u003cbr\u003e19.4 Appliances \u003cbr\u003e19.5 Automotive materials \u003cbr\u003e19.6 Bottles and containers \u003cbr\u003e19.7 Building components \u003cbr\u003e19.8 Business machines \u003cbr\u003e19.9 Cable and wire \u003cbr\u003e19.10 Coated fabrics \u003cbr\u003e19.11 Coatings and paints \u003cbr\u003e19.12 Cosmetics and pharmaceutical products \u003cbr\u003e19.13 Dental restorative composites \u003cbr\u003e19.14 Electrical and electronic materials \u003cbr\u003e19.15 Electromagnetic interference shielding \u003cbr\u003e19.16 Fibers \u003cbr\u003e19.17 Film \u003cbr\u003e19.18 Foam \u003cbr\u003e19.19 Food and feed \u003cbr\u003e19.20 Friction materials \u003cbr\u003e19.21 Geosynthetics \u003cbr\u003e19.22 Hoses and pipes \u003cbr\u003e19.23 Magnetic devices \u003cbr\u003e19.24 Medical applications \u003cbr\u003e19.25 Membranes \u003cbr\u003e19.26 Noise damping \u003cbr\u003e19.27 Optical devices \u003cbr\u003e19.28 Paper \u003cbr\u003e19.29 Radiation shields \u003cbr\u003e19.30 Railway transportation \u003cbr\u003e19.31 Roofing \u003cbr\u003e19.32 Telecommunication \u003cbr\u003e19.33 Tires \u003cbr\u003e19.34 Sealants \u003cbr\u003e19.35 Siding \u003cbr\u003e19.36 Sports equipment \u003cbr\u003e19.37 Waterproofing \u003cbr\u003e19.38 Windows \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e20 HAZARDS IN FILLER USE \u003cbr\u003eReferences \u003cbr\u003eINDEX\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 17 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st, 2nd and 3rd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives (1st and 2nd Editions), PVC Degradation \u0026amp; Stabilization, PVC Formulary, Handbook of UV Degradation and Stabilization, Handbook of Biodeterioration, Biodegradation and Biostabilization, and Handbook of Polymers (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability, and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education.","published_at":"2017-06-22T21:13:46-04:00","created_at":"2017-06-22T21:13:46-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2016","additives for plastics","best","book","calcium carbon","compounding of rubber","fillers additives","fillers and environment","flame retardanst for plastics","graphite","magnesium","mica","nanofillers","p-additives","particular fillers","physical properties","polymer","quality control","silica"],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378374020,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Fillers, 4th Edition","public_title":null,"options":["Default Title"],"price":35000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-91-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-91-1.jpg?v=1499719932"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-91-1.jpg?v=1499719932","options":["Title"],"media":[{"alt":null,"id":355725115485,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-91-1.jpg?v=1499719932"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-91-1.jpg?v=1499719932","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych \u003cbr\u003eISBN 978-1-895198-91-1 \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cspan\u003ePublished: 2016\u003cbr\u003e\u003c\/span\u003eFigures: 615\u003c\/div\u003e\n\u003cdiv\u003eTables: 190\u003c\/div\u003e\n\u003cdiv\u003ePages: 922\u003c\/div\u003e\n\u003cdiv\u003eFourth Edition\u003c\/div\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis handbook gives direct comparison of general purpose fillers (micron-size fillers) and nanofillers.\u003cbr\u003e\u003cbr\u003eOver 4,000 research papers, mostly published from 1994 to 2015 (over 1000 new papers in this edition), technical data from over 200 filler and equipment manufacturing companies, and patent literature were reviewed for this comprehensive handbook. \u003cbr\u003e\u003cbr\u003eThe book is designed to be single source of information for an experienced practitioner as well as a reference text for students and those new to the fields where fillers are used. The previous editions, used by very large number of readers, does not contain essential developments of extensive research on fillers in the last 10 years, especially related to nanofillers, graphene and other novelty products. \u003cbr\u003e\u003cbr\u003eFillers, in most applications, are no longer used as cost-saving additives but they add value to final products, and many products cannot be successfully designed without them. This reference book is a powerful tool for today’s challenges, which can only be met by those equipped with extensive information. \u003cbr\u003e\u003cbr\u003eThe book provides the information on three groups of relevant topics: available fillers and their properties, their effect on filled materials, and their use in practical applications. \u003cbr\u003e\u003cbr\u003eOne third of the book covers the grades of fillers available in the world market. Fillers are divided into 83 groups and their properties are analyzed to pinpoint properties, applications, and sources. The technical information is a synthesis of information on several thousand grades of fillers manufactured today. The morphology of fillers, in addition to the numerical and other data, is illustrated by over 200 SEM TEM, AFM micrographs.\u003cbr\u003e\u003cbr\u003eThe second part of the handbook discusses the effects of filler incorporation. Ten chapters cover the mechanical properties of compounded materials, the effect of the filler on material rheology, the morphology of the filled system, the material durability, flammability and recycling, the structure of interphase, chemical interactions, interaction with and effect on other additives, fillers use in material combinations, and the analytical methods of testing fillers and filled materials.\u003cbr\u003e\u003cbr\u003eThe last part of the book is concerned with application of fillers on an industrial scale. Several chapters discuss filler transportation, storage, processing and equipment used for these purposes. Others deal with the quality control of fillers, formulation with fillers, different processing methods, groups of products, and health and safety issues. This part is designed to assist industrial engineers to evaluate advances in the processing technology. It is also invaluable for chemists who design formulations for industrial processes and students in chemical engineering who must learn how modern industry operates in practical applications. The handbook is invaluable for sales and marketing because it gives possibility of direct comparison of fillers and their potential use and contains all required information to position them in the marketplace.\u003cbr\u003e\u003cbr\u003eTo summarize, major features of this handbook are:\u003cbr\u003e\u003cbr\u003e• Comprehensive review of literature\u003cbr\u003e• The most current information\u003cbr\u003e• Information required by scientists, engineers, marketing, sales, and students given in one source\u003cbr\u003e• All aspects of filler properties, effects, and application thoroughly reviewed\u003cbr\u003e• Contains all available information to make decision on what can be done by traditional fillers and where nanotechnology excels\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION \u003cbr\u003e1.1 Expectations from fillers \u003cbr\u003e1.2 Typical filler properties \u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification \u003cbr\u003e1.5 Markets and trends \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e2 SOURCES OF FILLERS, THEIR CHEMICAL COMPOSITION, PROPERTIES, AND MORPHOLOGY \u003cbr\u003e2.1 Particulate Fillers \u003cbr\u003e2.1.1 Aluminum flakes and powders \u003cbr\u003e2.1.2 Aluminum borate whiskers \u003cbr\u003e2.1.3 Aluminum nitride \u003cbr\u003e2.1.4 Aluminum oxide \u003cbr\u003e2.1.5 Aluminum trihydroxide \u003cbr\u003e2.1.6 Anthracite \u003cbr\u003e2.1.7 Antimonate of sodium \u003cbr\u003e2.1.8 Antimony pentoxide \u003cbr\u003e2.1.8 Antimony trioxide \u003cbr\u003e2.1.10 Ammonium octamolybdate \u003cbr\u003e2.1.11 Apatite \u003cbr\u003e2.1.12 Ash, fly \u003cbr\u003e2.1.13 Attapulgite \u003cbr\u003e2.1.14 Barium metaborate \u003cbr\u003e2.1.15 Barium sulfate \u003cbr\u003e2.1.16 Barium \u0026amp; strontium sulfates \u003cbr\u003e2.1.17 Barium titanate \u003cbr\u003e2.1.18 Bentonite \u003cbr\u003e2.1.19 Beryllium oxide \u003cbr\u003e2.1.20 Boron nitride \u003cbr\u003e2.1.21 Calcium carbonate \u003cbr\u003e2.1.22 Calcium fluoride \u003cbr\u003e2.1.23 Calcium hydroxide \u003cbr\u003e2.1.24 Calcium phosphate \u003cbr\u003e2.1.25 Calcium silicate \u003cbr\u003e2.1.26 Calcium sulfate \u003cbr\u003e2.1.27 Carbon black \u003cbr\u003e2.1.28 Carbonyl iron powder \u003cbr\u003e2.1.29 Cellulose particles \u003cbr\u003e2.1.30 Ceramic beads \u003cbr\u003e2.1.31 Chitosan \u003cbr\u003e2.1.32 Clamshell powder \u003cbr\u003e2.1.33 Clay \u003cbr\u003e2.1.34 Cobalt powder \u003cbr\u003e2.1.35 Copper \u003cbr\u003e2.1.36 Corn cob powder \u003cbr\u003e2.1.37 Cristobalite \u003cbr\u003e2.1.38 Diatomaceous earth \u003cbr\u003e2.1.39 Dolomite \u003cbr\u003e2.1.40 Eggshell filler \u003cbr\u003e2.1.41 Ferrites \u003cbr\u003e2.1.42 Feldspar \u003cbr\u003e2.1.43 Gandolinium oxide \u003cbr\u003e2.1.44 Glass beads \u003cbr\u003e2.1.45 Gold \u003cbr\u003e2.1.46 Graphene \u003cbr\u003e2.1.47 Graphene oxide \u003cbr\u003e2.1.48 Graphite \u003cbr\u003e2.1.49 Ground tire powder \u003cbr\u003e2.1.50 Halloysite \u003cbr\u003e2.1.51 Huntite \u003cbr\u003e2.1.52 Hydrous calcium silicate \u003cbr\u003e2.1.53 Illite \u003cbr\u003e2.1.54 Iron \u003cbr\u003e2.1.55 Iron oxide \u003cbr\u003e2.1.56 Kaolin \u003cbr\u003e2.1.57 Lead oxide \u003cbr\u003e2.1.58 Lithopone \u003cbr\u003e2.1.59 Magnesium oxide \u003cbr\u003e2.1.60 Magnesium hydroxide \u003cbr\u003e2.1.61 Magnetite \u003cbr\u003e2.1.62 Metal-containing conductive materials \u003cbr\u003e2.1.63 Mica \u003cbr\u003e2.1.64 Molybdenum \u003cbr\u003e2.1.65 Molybdenum disulfide \u003cbr\u003e2.1.66 Molybdic oxide \u003cbr\u003e2.1.67 Nanofillers \u003cbr\u003e2.1.68 Nickel \u003cbr\u003e2.1.69 Nickel oxide \u003cbr\u003e2.1.70 Nickel zinc ferrite \u003cbr\u003e2.1.71 Nutshell powder \u003cbr\u003e2.1.72 Perlite \u003cbr\u003e2.1.73 Polymeric fillers \u003cbr\u003e2.1.74 Potassium hexatitanate whiskers \u003cbr\u003e2.1.75 Pumice \u003cbr\u003e2.1.76 Pyrophyllite \u003cbr\u003e2.1.77 Rubber particles \u003cbr\u003e2.1.78 Sepiolite \u003cbr\u003e2.1.79 Silica \u003cbr\u003e2.1.79.1 Fumed silica \u003cbr\u003e2.1.79.2 Fused silica \u003cbr\u003e2.1.79.3 Precipitated silica \u003cbr\u003e2.1.79.4 Quartz (Tripoli) \u003cbr\u003e2.1.79.5 Sand \u003cbr\u003e2.1.79.6 Silica gel \u003cbr\u003e2.1.80 Silicon carbide \u003cbr\u003e2.1.81 Silicon nitride \u003cbr\u003e2.1.82 Silver powder and flakes \u003cbr\u003e2.1.83 Slate flour \u003cbr\u003e2.1.84 Talc \u003cbr\u003e2.1.85 Titanium dioxide \u003cbr\u003e2.1.86 Tungsten \u003cbr\u003e2.1.87 Vermiculite \u003cbr\u003e2.1.88 Wollastonite \u003cbr\u003e2.1.89 Wood flour and similar materials \u003cbr\u003e2.1.90 Zeolites \u003cbr\u003e2.1.91 Zinc borate \u003cbr\u003e2.1.92 Zinc oxide \u003cbr\u003e2.1.93 Zinc stannate \u003cbr\u003e2.1.94 Zinc sulfide \u003cbr\u003e2.2 Fibers \u003cbr\u003e2.2.1 Aramid fibers \u003cbr\u003e2.2.2 Carbon fibers \u003cbr\u003e2.2.3 Carbon nanotubes \u003cbr\u003e2.2.4 Cellulose fibers \u003cbr\u003e2.2.5 Glass fibers \u003cbr\u003e2.2.6 Other fibers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e3 FILLERS TRANSPORTATION, STORAGE, AND PROCESSING \u003cbr\u003e3.1 Filler packaging \u003cbr\u003e3.2 External transportation \u003cbr\u003e3.3 Filler receiving \u003cbr\u003e3.4 Storage \u003cbr\u003e3.5 In-plant conveying \u003cbr\u003e3.6 Semi-bulk unloading systems \u003cbr\u003e3.7 Bag handling equipment \u003cbr\u003e3.8 Blending \u003cbr\u003e3.9 Feeding \u003cbr\u003e3.10 Drying \u003cbr\u003e3.11 Dispersion \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e4 QUALITY CONTROL OF FILLERS \u003cbr\u003e4.1 Absorption coefficient \u003cbr\u003e4.2 Acidity or alkalinity of water extract \u003cbr\u003e4.3 Ash content \u003cbr\u003e4.4 Brightness \u003cbr\u003e4.5 Coarse particles \u003cbr\u003e4.6 Color \u003cbr\u003e4.7 CTAB surface area \u003cbr\u003e4.8 Density \u003cbr\u003e4.9 Electrical properties \u003cbr\u003e4.10 Extractables \u003cbr\u003e4.11 Fines content \u003cbr\u003e4.12 Heating loss \u003cbr\u003e4.13 Heat stability \u003cbr\u003e4.14 Hegman fineness \u003cbr\u003e4.15 Hiding power \u003cbr\u003e4.16 Iodine absorption number \u003cbr\u003e4.17 Lightening power of white pigments \u003cbr\u003e4.18 Loss on ignition \u003cbr\u003e4.19 Mechanical and related properties \u003cbr\u003e4.20 Oil absorption \u003cbr\u003e4.21 Particle size \u003cbr\u003e4.22 Pellet strength \u003cbr\u003e4.23 pH \u003cbr\u003e4.24 Resistance to light \u003cbr\u003e4.25 Resistivity of aqueous extract \u003cbr\u003e4.26 Sieve residue \u003cbr\u003e4.27 Soluble matter \u003cbr\u003e4.28 Specific surface area \u003cbr\u003e4.29 Sulfur content \u003cbr\u003e4.30 Tamped volume \u003cbr\u003e4.31 Tinting strength \u003cbr\u003e4.32 Volatile matter \u003cbr\u003e4.33 Water content \u003cbr\u003e4.34 Water-soluble sulfates, chlorides and nitrates \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e5 PHYSICAL PROPERTIES OF FILLERS AND FILLED MATERIALS \u003cbr\u003e5.1 Density \u003cbr\u003e5.2 Particle size \u003cbr\u003e5.3 Particle size distribution \u003cbr\u003e5.4 Particle shape \u003cbr\u003e5.5 Particle surface morphology and roughness \u003cbr\u003e5.6 Specific surface area \u003cbr\u003e5.7 Porosity \u003cbr\u003e5.8 Particle-particle interaction and spacing \u003cbr\u003e5.9 Agglomerates \u003cbr\u003e5.10 Aggregates and structure \u003cbr\u003e5.11 Flocculation and sedimentation \u003cbr\u003e5.12 Aspect ratio \u003cbr\u003e5.13 Packing volume \u003cbr\u003e5.14 pH \u003cbr\u003e5.15 Zeta-potential \u003cbr\u003e5.16 Surface energy \u003cbr\u003e5.17 Moisture \u003cbr\u003e5.18 Absorption of liquids and swelling \u003cbr\u003e5.19 Permeability and barrier properties \u003cbr\u003e5.20 Oil absorption \u003cbr\u003e5.21 Hydrophilic\/hydrophobic properties \u003cbr\u003e5.22 Optical properties \u003cbr\u003e5.23 Refractive index \u003cbr\u003e5.24 Friction properties \u003cbr\u003e5.25 Hardness \u003cbr\u003e5.26 Intumescent properties \u003cbr\u003e5.27 Thermal conductivity \u003cbr\u003e5.28 Thermal expansion coefficient \u003cbr\u003e5.29 Thermal degradation \u003cbr\u003e5.30 Melting temperature \u003cbr\u003e5.31 Glass transition temperature \u003cbr\u003e5.32 Electrical properties \u003cbr\u003e5.33 Relative permittivity \u003cbr\u003e5.34 Electrical percolation \u003cbr\u003e5.35 EMI shielding \u003cbr\u003e5.36 Magnetic properties \u003cbr\u003e5.37 Shape memory \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e6 CHEMICAL PROPERTIES OF FILLERS AND FILLED MATERIALS \u003cbr\u003e6.1 Reactivity \u003cbr\u003e6.2 Chemical groups on the filler surface \u003cbr\u003e6.3 Filler surface modification \u003cbr\u003e6.4 Filler modification and material properties \u003cbr\u003e6.5 Resistance to various chemicals \u003cbr\u003e6.6 Cure in fillers presence \u003cbr\u003e6.7 Polymerization in fillers presence \u003cbr\u003e6.8 Grafting \u003cbr\u003e6.9 Crosslink density \u003cbr\u003e6.10 Reaction kinetics \u003cbr\u003e6.11 Molecular mobility \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e7 ORGANIZATION OF INTERFACE AND MATRIX CONTAINING FILLERS \u003cbr\u003e7.1 Particle distribution in matrix \u003cbr\u003e7.2 Orientation of filler particles in a matrix \u003cbr\u003e7.3 Voids \u003cbr\u003e7.4 Matrix-filler interaction \u003cbr\u003e7.5 Chemical interactions \u003cbr\u003e7.6 Other interactions \u003cbr\u003e7.7 Interphase organization \u003cbr\u003e7.8 Interfacial adhesion \u003cbr\u003e7.9 Interphase thickness \u003cbr\u003e7.10 Filler-chain links \u003cbr\u003e7.11 Chain dynamics \u003cbr\u003e7.12 Bound rubber \u003cbr\u003e7.13 Debonding \u003cbr\u003e7.14 Mechanisms of reinforcement \u003cbr\u003e7.15 Benefits of organization on molecular level \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e8 THE EFFECT OF FILLERS ON THE MECHANICAL PROPERTIES OF FILLED MATERIALS \u003cbr\u003e8.1 Tensile strength and elongation \u003cbr\u003e8.2 Tensile yield stress \u003cbr\u003e8.3 Mullins’ effect \u003cbr\u003e8.4 Elastic modulus \u003cbr\u003e8.5 Flexural strength and modulus \u003cbr\u003e8.6 Impact resistance \u003cbr\u003e8.7 Hardness \u003cbr\u003e8.8 Tear strength \u003cbr\u003e8.9 Compressive strength \u003cbr\u003e8.10 Fracture resistance \u003cbr\u003e8.11 Wear \u003cbr\u003e8.12 Friction \u003cbr\u003e8.13 Abrasion \u003cbr\u003e8.14 Scratch resistance \u003cbr\u003e8.15 Fatigue \u003cbr\u003e8.16 Failure \u003cbr\u003e8.17 Adhesion \u003cbr\u003e8.18 Thermal deformation \u003cbr\u003e8.19 Shrinkage \u003cbr\u003e8.20 Warpage \u003cbr\u003e8.21 Compression set \u003cbr\u003e8.22 Load transfer \u003cbr\u003e8.23 Residual stress \u003cbr\u003e8.24 \u003cbr\u003eCreep \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e9 THE EFFECT OF FILLERS ON RHEOLOGICAL PROPERTIES OF FILLED MATERIALS \u003cbr\u003e9.1 Viscosity \u003cbr\u003e9.2 Flow \u003cbr\u003e9.3 Flow induced filler particle orientation \u003cbr\u003e9.4 Torque \u003cbr\u003e9.5 Viscoelasticity \u003cbr\u003e9.6 Dynamic mechanical behavior \u003cbr\u003e9.7 Complex viscosity \u003cbr\u003e9.8 Shear viscosity \u003cbr\u003e9.9 Elongational viscosity \u003cbr\u003e9.10 Melt rheology \u003cbr\u003e9.11 Yield value \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e10 MORPHOLOGY OF FILLED SYSTEMS \u003cbr\u003e10.1 Crystallinity \u003cbr\u003e10.2 Crystallization behavior \u003cbr\u003e10.3 Nucleation \u003cbr\u003e10.4 Crystal size \u003cbr\u003e10.5 Spherulites \u003cbr\u003e10.6 Transcrystallinity \u003cbr\u003e10.7 Orientation \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e11 EFFECT OF FILLERS ON EPOSURE TO DIFFERENT ENVIRONMENTS \u003cbr\u003e11.1 Irradiation \u003cbr\u003e11.2 UV radiation \u003cbr\u003e11.3 Temperature \u003cbr\u003e11.4 Liquids and vapors \u003cbr\u003e11.5 Stabilization \u003cbr\u003e11.6 Degradable materials \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e12 FLAMMABILITY OF FILLED MATERIALS \u003cbr\u003e12.1 Definitions \u003cbr\u003e12.2 Limiting oxygen index \u003cbr\u003e12.3 Ignition and flame spread rate \u003cbr\u003e12.4 Heat transmission rate \u003cbr\u003e12.5 Decomposition and combustion \u003cbr\u003e12.6 Emission of gaseous components \u003cbr\u003e12.7 Smoke \u003cbr\u003e12.8 Char \u003cbr\u003e12.9 Recycling \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e13 INFLUENCE OF FILLERS ON PERFORMANCE OF OTHER ADDITIVES AND VICE VERSA \u003cbr\u003e13.1 Adhesion promoters \u003cbr\u003e13.2 Antistatics \u003cbr\u003e13.3 Blowing agents \u003cbr\u003e13.4 Catalysts \u003cbr\u003e13.5 Compatibilizers \u003cbr\u003e13.6 Coupling agents \u003cbr\u003e13.7 Dispersing agents and surface active agents \u003cbr\u003e13.8 Flame retardants \u003cbr\u003e13.9 Impact modifiers \u003cbr\u003e13.10 UV stabilizers \u003cbr\u003e13.11 Other additives \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e14 TESTING METHODS IN FILLED SYSTEMS \u003cbr\u003e14.1 Physical methods \u003cbr\u003e14.1.1 Atomic force microscopy \u003cbr\u003e14.1.2 Autoignition test \u003cbr\u003e14.1.3 Bound rubber \u003cbr\u003e14.1.4 Char formation \u003cbr\u003e14.1.5 Cone calorimetry \u003cbr\u003e14.1.6 Contact angle \u003cbr\u003e14.1.7 Dispersing agent requirement \u003cbr\u003e14.1.8 Dispersion tests \u003cbr\u003e14.1.9 Dripping test \u003cbr\u003e14.1.10 Dynamic mechanical analysis \u003cbr\u003e14.1.11 Electric constants determination \u003cbr\u003e14.1.12 Electron microscopy \u003cbr\u003e14.1.13 Fiber orientation \u003cbr\u003e14.1.14 Flame propagation test \u003cbr\u003e14.1.15 Glow wire test \u003cbr\u003e14.1.16 Image analysis \u003cbr\u003e14.1.17 Limiting oxygen index \u003cbr\u003e14.1.18 Magnetic properties \u003cbr\u003e14.1.19 Optical microscopy \u003cbr\u003e14.1.20 Particle size analysis \u003cbr\u003e14.1.21 Radiant panel test \u003cbr\u003e14.1.22 Rate of combustion \u003cbr\u003e14.1.23 Scanning acoustic microscopy \u003cbr\u003e14.1.24 Smoke chamber \u003cbr\u003e14.1.25 Sonic methods \u003cbr\u003e14.1.26 Specific surface area \u003cbr\u003e14.1.27 Thermal analysis \u003cbr\u003e14.2 Chemical and instrumental analysis \u003cbr\u003e14.2.1 Electron spin resonance \u003cbr\u003e14.2.2 Electron spectroscopy for chemical analysis \u003cbr\u003e14.2.3 Inverse gas chromatography \u003cbr\u003e14.2.4 Gas chromatography \u003cbr\u003e14.2.5 Gel content \u003cbr\u003e14.2.6 Infrared and Raman spectroscopy \u003cbr\u003e14.2.7 Nuclear magnetic resonance spectroscopy \u003cbr\u003e14.2.8 UV and visible spectophotometry \u003cbr\u003e14.2.9 X-ray analysis \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e15 FILLERS IN COMMERCIAL POLYMERS \u003cbr\u003e15.1 Acrylics \u003cbr\u003e15.2 Acrylonitrile-butadiene-styrene copolymer \u003cbr\u003e15.3 Acrylonitrile-styrene-acrylate \u003cbr\u003e15.4 Aliphatic polyketone \u003cbr\u003e15.5 Alkyd resins \u003cbr\u003e15.6 Bismaleimide \u003cbr\u003e15.7 Cellulose acetate \u003cbr\u003e15.8 Chitosan \u003cbr\u003e15.9 Elastomers \u003cbr\u003e15.10 Epoxy resins \u003cbr\u003e15.11 Ethylene vinyl acetate copolymer \u003cbr\u003e15.12 Ethylene vinyl alcohol copolymer \u003cbr\u003e15.13 Ethylene-ethyl acetate copolymer \u003cbr\u003e15.14 Ethylene-propylene copolymers \u003cbr\u003e15.15 Ionomers \u003cbr\u003e15.16 Liquid crystalline polymers \u003cbr\u003e15.17 Perfluoroalkoxy resin \u003cbr\u003e15.18 Phenolic resins \u003cbr\u003e15.19 Poly(acrylic acid) \u003cbr\u003e15.20 Polyacrylonitrile \u003cbr\u003e15.21 Polyamides \u003cbr\u003e15.22 Polyamideimide \u003cbr\u003e15.23 Polyamines \u003cbr\u003e15.24 Polyaniline \u003cbr\u003e15.25 Polyaryletherketone \u003cbr\u003e15.26 Poly(butylene succinate) \u003cbr\u003e15.27 Poly(butylene terephthalate) \u003cbr\u003e15.28 Polycaprolactone \u003cbr\u003e15.29 Polycarbonate \u003cbr\u003e15.30 Polydicyclopentadiene \u003cbr\u003e15.31 Polyetheretherketone \u003cbr\u003e15.32 Polyetherimide \u003cbr\u003e15.33 Polyether sulfone \u003cbr\u003e15.34 Polyethylene \u003cbr\u003e15.35 Polyethylene, chlorinated \u003cbr\u003e15.36 Polyethylene, chlorosulfonated \u003cbr\u003e15.37 Poly(ethylene oxide) \u003cbr\u003e15.38 Poly(ethylene terephthalate) \u003cbr\u003e15.39 Polyimide \u003cbr\u003e15.41 Polymethylmethacrylate \u003cbr\u003e15.42 Polyoxymethylene \u003cbr\u003e15.43 Poly(phenylene ether) \u003cbr\u003e15.44 Poly(phenylene sulfide) \u003cbr\u003e15.45 Polypropylene \u003cbr\u003e15.46 Polypyrrole \u003cbr\u003e15.47 Polystyrene \u0026amp; high impact \u003cbr\u003e15.48 Polysulfide \u003cbr\u003e15.49 Polysulfone \u003cbr\u003e15.50 Polytetrafluoroethylene \u003cbr\u003e15.51 Polyurethanes \u003cbr\u003e15.52 Poly(vinyl acetate) \u003cbr\u003e15.53 Poly(vinyl alcohol) \u003cbr\u003e15.54 Poly(vinyl butyral) \u003cbr\u003e15.55 Poly(vinyl chloride) \u003cbr\u003e15.56 Rubbers \u003cbr\u003e15.56.1 Natural rubber \u003cbr\u003e15.56.2 Nitrile rubber \u003cbr\u003e15.56.3 Polybutadiene rubber \u003cbr\u003e15.56.4 Polybutyl rubber \u003cbr\u003e15.56.5 Polychloroprene \u003cbr\u003e15.56.6 Polyisobutylene \u003cbr\u003e15.56.7 Polyisoprene \u003cbr\u003e15.56.8 Styrene-butadiene rubber \u003cbr\u003e15.57 Silicones \u003cbr\u003e15.58 Styrene-acrylonitrile copolymer \u003cbr\u003e15.59 Tetrafluoroethylene-perfluoropropylene \u003cbr\u003e15.60 Unsaturated polyesters \u003cbr\u003e15.61 Vinylidene-fluoride terpolymers \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e16 FILLER IN MATERIALS COMBINATIONS \u003cbr\u003e16.1 Blends, alloys and interpenetrating networks \u003cbr\u003e16.2 Composites \u003cbr\u003e16.3 Nanocomposites \u003cbr\u003e16.4 Laminates \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e17 FORMULATION WITH FILLERS \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e18 FILLERS IN DIFFERENT PROCESSING METHODS \u003cbr\u003e18.1 Blow molding \u003cbr\u003e18.2 Calendering and hot-melt coating \u003cbr\u003e18.3 Compression molding \u003cbr\u003e18.4 Dip coating \u003cbr\u003e18.5 Dispersion \u003cbr\u003e18.6 Extrusion \u003cbr\u003e18.7 Foaming \u003cbr\u003e18.8 Injection molding \u003cbr\u003e18.9 Knife coating \u003cbr\u003e18.10 Mixing \u003cbr\u003e18.11 Pultrusion \u003cbr\u003e18.12 Reaction injection molding \u003cbr\u003e18.13 Resin transfer molding \u003cbr\u003e18.14 Rotational molding \u003cbr\u003e18.15 Sheet molding \u003cbr\u003e18.16 Spinning \u003cbr\u003e18.17 Thermoforming \u003cbr\u003e18.18 Welding and machining \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e19 FILLERS IN DIFFERENT PRODUCTS \u003cbr\u003e19.1 Adhesives \u003cbr\u003e19.2 Agriculture \u003cbr\u003e19.3 Aerospace \u003cbr\u003e19.4 Appliances \u003cbr\u003e19.5 Automotive materials \u003cbr\u003e19.6 Bottles and containers \u003cbr\u003e19.7 Building components \u003cbr\u003e19.8 Business machines \u003cbr\u003e19.9 Cable and wire \u003cbr\u003e19.10 Coated fabrics \u003cbr\u003e19.11 Coatings and paints \u003cbr\u003e19.12 Cosmetics and pharmaceutical products \u003cbr\u003e19.13 Dental restorative composites \u003cbr\u003e19.14 Electrical and electronic materials \u003cbr\u003e19.15 Electromagnetic interference shielding \u003cbr\u003e19.16 Fibers \u003cbr\u003e19.17 Film \u003cbr\u003e19.18 Foam \u003cbr\u003e19.19 Food and feed \u003cbr\u003e19.20 Friction materials \u003cbr\u003e19.21 Geosynthetics \u003cbr\u003e19.22 Hoses and pipes \u003cbr\u003e19.23 Magnetic devices \u003cbr\u003e19.24 Medical applications \u003cbr\u003e19.25 Membranes \u003cbr\u003e19.26 Noise damping \u003cbr\u003e19.27 Optical devices \u003cbr\u003e19.28 Paper \u003cbr\u003e19.29 Radiation shields \u003cbr\u003e19.30 Railway transportation \u003cbr\u003e19.31 Roofing \u003cbr\u003e19.32 Telecommunication \u003cbr\u003e19.33 Tires \u003cbr\u003e19.34 Sealants \u003cbr\u003e19.35 Siding \u003cbr\u003e19.36 Sports equipment \u003cbr\u003e19.37 Waterproofing \u003cbr\u003e19.38 Windows \u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e20 HAZARDS IN FILLER USE \u003cbr\u003eReferences \u003cbr\u003eINDEX\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 17 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st, 2nd and 3rd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives (1st and 2nd Editions), PVC Degradation \u0026amp; Stabilization, PVC Formulary, Handbook of UV Degradation and Stabilization, Handbook of Biodeterioration, Biodegradation and Biostabilization, and Handbook of Polymers (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability, and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education."}
Description Author: George Wypych ISBN 978-1-895198-99-7 (hard copy) Published: 2017Pages 250+viiiTables 38Figures 145 Summary Foaming processes can be controlled by many parameters, including type, amount of foaming agent, additives, saturation pressure, desorption time, die pressure, die temperature, feed ratio, gas contents, its flow rate and injection location, internal pressure after foaming, mold pressure, mold...
$285.00
in stock
{"id":11427190148,"title":"Handbook of Foaming and Blowing Agents","handle":"handbook-of-foaming-and-blowing-agents","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003c\/p\u003e\n\u003cp\u003eISBN 978-1-895198-99-7 (hard copy)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003ePublished: 2017\u003c\/span\u003e\u003cbr\u003ePages 250+viii\u003cbr\u003eTables 38\u003cbr\u003eFigures 145\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eFoaming processes can be controlled by many parameters, including type, amount of foaming agent, additives, saturation pressure, desorption time, die pressure, die temperature, feed ratio, gas contents, its flow rate and injection location, internal pressure after foaming, mold pressure, mold temperature, viscosity of composition under processing conditions, surface tension, time-temperature regime, and many other.\u003c\/p\u003e\n\u003cp\u003eThe selection of formulation depends on mechanisms of action of blowing agents and foaming mechanisms, as well as dispersion and solubility of foaming agents and foam stabilization requirements.\u003c\/p\u003e\n\u003cp\u003eThis book contains information on foaming technology which has been discussed in fourteen chapters each devoted to a different aspect of the foaming process.\u003c\/p\u003e\n\u003cp\u003eProperties of 23 groups of blowing agents have been discussed in Chapter 2. In the tabulated form, the typical range of technical performance is given for each group of foaming agents, including general properties, physical-chemical properties, health and safety, environmental impact, and application in different products and polymers.\u003c\/p\u003e\n\u003cp\u003eChapter 3 discusses mechanisms of foaming with the use of solid blowing agents which are decomposed to the gaseous products by application of heat, production of gaseous products by chemical reaction, and foaming by gasses and evaporating liquids. All information is illustrated by diagrams placed close to the text of discussion.\u003c\/p\u003e\n\u003cp\u003eDispersion of solid foaming agents and solubility of liquid and gaseous products is a subject of Chapter 4 with special emphasis on uniformity of foam produced and parameters of the foaming process. Evaluation of importance of parameters of foaming, included in chapter 5, contains influence of the amount of blowing agent, clamping pressure, delay time, desorption time, die pressure, die temperature, gas content, gas flow rate, gas injection location, gas sorption and desorption rates, internal pressure after foaming, mold pressure, mold temperature, operational window, plastisol viscosity, saturation pressure, saturation temperature, screw revolution speed, surface tension, time, temperature, and void volume.\u003c\/p\u003e\n\u003cp\u003eFoam stabilization methods for different blowing agents are included in Chapter 6. These methods help to obtain uniform structure of a foam and reinforce cell walls. Seven different foam efficiency measures are presented in Chapter 7. Morphology of foams is discussed in Chapter 8, including production of bimodal foams, cell density, cell morphology, cell size, cell wall thickness, closed and open cell formation and frequency, core and skin thickness, and morphological features.\u003c\/p\u003e\n\u003cp\u003eProduction of foam by different methods of plastic processing, such as blown film extrusion, calendering, clay exfoliation in production of reinforced composites, compression molding, depressurization, extrusion, free foaming, injection molding, microwave heating, rotational molding, solid-state foaming, supercritical fluid-laden pellet injection molding foaming, thermoforming, UV laser, vacuum drying, and wire coating are discussed in Chapter 9.\u003c\/p\u003e\n\u003cp\u003eSelection of foaming agents, their quantity and technology of processing for 44 polymers are included in Chapter 10. Chapter 11 discusses the influence of 15 groups of additives on the foaming outcome. Chapter 12 gives information on the effect of foaming on 24 parameters of physical-mechanical properties of foams, setting the standard of achievable performance. Some important and exclusive analytical techniques useful in foaming are discussed in Chapter 13. In the last chapter, health and safety and environmental impacts of foaming processes are discussed.\u003cbr\u003e \u003cbr\u003eThis book has also companion \u003cstrong\u003eDatabook of Blowing and Auxiliary Agents\u003c\/strong\u003e which contains data for these diverse chemical components of formulations of foamed materials and reveals their roles in foaming processes. There is no information which is repeated in both books. They do complement each other giving reader comprehensive information on the subject never published before with such a breadth.\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction\u003cbr\u003e2 Chemical origin of blowing agents\u003cbr\u003e3 Mechanisms of action of blowing agents\u003cbr\u003e4 Dispersion and solubility of foaming agents\u003cbr\u003e5 Parameters of foaming\u003cbr\u003e6 Foam stabilization\u003cbr\u003e7 Foaming efficiency measures\u003cbr\u003e8 Morphology of foams\u003cbr\u003e9 Foaming in different processing methods\u003cbr\u003e10 Selection of blowing agents for different polymers\u003cbr\u003e11 Additives\u003cbr\u003e12 Effect of foaming on physical-mechanical properties of foams\u003cbr\u003e13 Analytical techniques useful in foaming\u003cbr\u003e14 Health and safety and environmental impact of foaming processes\u003cbr\u003eIndex\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 14 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st and 2nd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives, PVC Degradation \u0026amp; Stabilization, The PVC Formulary (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education.","published_at":"2017-07-13T16:58:01-04:00","created_at":"2017-07-13T16:58:49-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2017","additive","blowing","book","expansion","foam","foaming","kicker","polymer","rubber","technology"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45224136068,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Foaming and Blowing Agents","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"978-1-895198-99-7","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-99-7.jpg?v=1499979724"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-99-7.jpg?v=1499979724","options":["Title"],"media":[{"alt":null,"id":362540400733,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-99-7.jpg?v=1499979724"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-99-7.jpg?v=1499979724","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003c\/p\u003e\n\u003cp\u003eISBN 978-1-895198-99-7 (hard copy)\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003ePublished: 2017\u003c\/span\u003e\u003cbr\u003ePages 250+viii\u003cbr\u003eTables 38\u003cbr\u003eFigures 145\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eFoaming processes can be controlled by many parameters, including type, amount of foaming agent, additives, saturation pressure, desorption time, die pressure, die temperature, feed ratio, gas contents, its flow rate and injection location, internal pressure after foaming, mold pressure, mold temperature, viscosity of composition under processing conditions, surface tension, time-temperature regime, and many other.\u003c\/p\u003e\n\u003cp\u003eThe selection of formulation depends on mechanisms of action of blowing agents and foaming mechanisms, as well as dispersion and solubility of foaming agents and foam stabilization requirements.\u003c\/p\u003e\n\u003cp\u003eThis book contains information on foaming technology which has been discussed in fourteen chapters each devoted to a different aspect of the foaming process.\u003c\/p\u003e\n\u003cp\u003eProperties of 23 groups of blowing agents have been discussed in Chapter 2. In the tabulated form, the typical range of technical performance is given for each group of foaming agents, including general properties, physical-chemical properties, health and safety, environmental impact, and application in different products and polymers.\u003c\/p\u003e\n\u003cp\u003eChapter 3 discusses mechanisms of foaming with the use of solid blowing agents which are decomposed to the gaseous products by application of heat, production of gaseous products by chemical reaction, and foaming by gasses and evaporating liquids. All information is illustrated by diagrams placed close to the text of discussion.\u003c\/p\u003e\n\u003cp\u003eDispersion of solid foaming agents and solubility of liquid and gaseous products is a subject of Chapter 4 with special emphasis on uniformity of foam produced and parameters of the foaming process. Evaluation of importance of parameters of foaming, included in chapter 5, contains influence of the amount of blowing agent, clamping pressure, delay time, desorption time, die pressure, die temperature, gas content, gas flow rate, gas injection location, gas sorption and desorption rates, internal pressure after foaming, mold pressure, mold temperature, operational window, plastisol viscosity, saturation pressure, saturation temperature, screw revolution speed, surface tension, time, temperature, and void volume.\u003c\/p\u003e\n\u003cp\u003eFoam stabilization methods for different blowing agents are included in Chapter 6. These methods help to obtain uniform structure of a foam and reinforce cell walls. Seven different foam efficiency measures are presented in Chapter 7. Morphology of foams is discussed in Chapter 8, including production of bimodal foams, cell density, cell morphology, cell size, cell wall thickness, closed and open cell formation and frequency, core and skin thickness, and morphological features.\u003c\/p\u003e\n\u003cp\u003eProduction of foam by different methods of plastic processing, such as blown film extrusion, calendering, clay exfoliation in production of reinforced composites, compression molding, depressurization, extrusion, free foaming, injection molding, microwave heating, rotational molding, solid-state foaming, supercritical fluid-laden pellet injection molding foaming, thermoforming, UV laser, vacuum drying, and wire coating are discussed in Chapter 9.\u003c\/p\u003e\n\u003cp\u003eSelection of foaming agents, their quantity and technology of processing for 44 polymers are included in Chapter 10. Chapter 11 discusses the influence of 15 groups of additives on the foaming outcome. Chapter 12 gives information on the effect of foaming on 24 parameters of physical-mechanical properties of foams, setting the standard of achievable performance. Some important and exclusive analytical techniques useful in foaming are discussed in Chapter 13. In the last chapter, health and safety and environmental impacts of foaming processes are discussed.\u003cbr\u003e \u003cbr\u003eThis book has also companion \u003cstrong\u003eDatabook of Blowing and Auxiliary Agents\u003c\/strong\u003e which contains data for these diverse chemical components of formulations of foamed materials and reveals their roles in foaming processes. There is no information which is repeated in both books. They do complement each other giving reader comprehensive information on the subject never published before with such a breadth.\u003c\/p\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction\u003cbr\u003e2 Chemical origin of blowing agents\u003cbr\u003e3 Mechanisms of action of blowing agents\u003cbr\u003e4 Dispersion and solubility of foaming agents\u003cbr\u003e5 Parameters of foaming\u003cbr\u003e6 Foam stabilization\u003cbr\u003e7 Foaming efficiency measures\u003cbr\u003e8 Morphology of foams\u003cbr\u003e9 Foaming in different processing methods\u003cbr\u003e10 Selection of blowing agents for different polymers\u003cbr\u003e11 Additives\u003cbr\u003e12 Effect of foaming on physical-mechanical properties of foams\u003cbr\u003e13 Analytical techniques useful in foaming\u003cbr\u003e14 Health and safety and environmental impact of foaming processes\u003cbr\u003eIndex\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 14 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st and 2nd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives, PVC Degradation \u0026amp; Stabilization, The PVC Formulary (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education."}
Description Author: George WypychISBN 978-1-927885-31-4 Published: 2018Pages: 972+xFigures: 807Tables: 66 Summary The 6th edition of Handbook of Material Weathering contains a systematic update of knowledge generated in more than last 25 years since the 1st edition was published. For example, in the last 5 years, more than 8,000 new papers (30 new papers per week) have...
$350.00
in stock
{"id":384220299295,"title":"Handbook of Material Weathering 6th Edition","handle":"handbook-of-material-weathering","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN 978-1-927885-31-4\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: 2018\u003c\/span\u003e\u003cbr\u003ePages: 972+x\u003cbr\u003eFigures: 807\u003cbr\u003eTables: 66\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe 6th edition of Handbook of Material Weathering contains a systematic update of knowledge generated in more than last 25 years since the 1\u003csup\u003est\u003c\/sup\u003e edition was published. For example, in the last 5 years, more than 8,000 new papers (30 new papers per week) have been published on the material weathering, some of them having high importance for the weathering studies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe information required for the professional use has been growing so rapidly that additional books had to be written to accommodate essential knowledge for implementation in technological processes used to manufacture products, which deteriorate on exposure to weathering stress factors (see more information on these titles in Preface).\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eThis edition contains 22 chapters, which can be divided into the following groups:\u003cbr\u003e• Theory (photophysics and photochemistry)\u003cbr\u003e• Stress factors (parameters of exposure, measurements in assessment of weathering conditions, and climatic conditions)\u003cbr\u003e• Methods of weathering (laboratory degradation studies, weathering cycles, sample preparation, weathering data interpretation, lifetime prediction, and artificial weathering versus natural exposure)\u003cbr\u003e• Methods of testing of weathered samples (effect of weathering on material properties and testing methods of weathered specimens)\u003cbr\u003e• Weathering of polymers (data on 52 most important polymers, including mechanisms of degradation, effect of thermal history, characteristic changes in properties with graphical illustrations, and tables with numerical data)\u003cbr\u003e• Weathering of products (data on 42 groups of industrial products, including their required durability, lifetime expectation, relevant degradation mechanisms, and characteristic changes with graphical illustrations)\u003cbr\u003e• Effect of additives on weathering (12 groups of additives are discussed)\u003cbr\u003e• The most popular UV stabilizers, biocides, and preservatives used in protection of polymers, plastics and rubbers and the general principles of degradation, biodeterioration, and stabilization\u003cbr\u003e• Effect of environmental stress cracking (parameters controlling ESC, mechanisms, methods of testing, and effect on materials)\u003cbr\u003e• Specific topics (suitability of weathered materials for recycling, interrelation between corrosion and weathering, and methods of study and prevention of deterioration of historical monuments made out of stone)\u003cbr\u003e\u003cbr\u003eThe above information is based on the thorough review of published papers, patents, and other relevant sources updated by the most recent data and information. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe set of monographic sources (see more information in Preface below) was prepared for research chemists in the photochemistry field, chemists and material scientists designing new materials, users of manufactured products, those who control the quality of manufactured products, and students who want to apply their knowledge to real materials. The books are used by regulating agencies and patent and litigating attorneys. \u003cbr\u003e\u003cbr\u003eHandbook of Material Weathering is now used in more than 100 countries. It should be pointed out that many readers still use the earlier editions (as seen from the numerous citations) which lack the current information or even, more detrimental, contain outdated information which has been superseded by the more recent findings. In this fast-growing field, the access to the most recent information cannot be overemphasized. For this very reason, a new edition of this book is prepared every five years.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreface\u003c\/h5\u003e\n\u003cp\u003eThe first edition of this book was published by ChemTec Publishing in 1990. The book had 18 chapters and 518 pages filled with the most up-to-date information on the subject of material weathering available in 1990.\u003cbr\u003e\u003cbr\u003eConsidering the size of the book and typesetting, the present edition is at least 3 times larger, in spite of the fact that two chapters were omitted from the fourth edition: Chapter 17. Stabilization and Stabilizers and Chapter 18. Biodegradation. Even without these, two chapters the 5th edition was larger than the previous 4th edition. The reason is quite obvious - the field is systematically growing with new data, methods, and discoveries happening every day. The 6th edition is updated by all new data and publications to produce a monograph containing all recent advances.\u003cbr\u003eIn response to requests by some users and changes in the available volume of the book by the printer (1200 pages can now be printed in one volume). The above mentioned two chapters are included in the 6th edition in their original form as they were published in the 4th edition. Information in these two chapters in most parts reflects the general understanding in these two areas of research and gives some general information on the subject. At the same time, it has to be pointed out that this field (especially biocides) changes very rapidly, therefore, several books are now available containing the up-to-date information in the following monographic sources:\u003cbr\u003e\u003cbr\u003eHandbook of Material Biodegradation, Biodeterioration, and Biostabilization, 2nd Ed. by Falkiewicz-Dulik, M, Janda, K, and Wypych, G., ChemTec Publishing, 2015, ISBN 978-1-895198-87-4\u003cbr\u003eThe book contains 11 chapters each devoted to essential aspects related to biodegradation and biostabilization of materials and products. The comprehensive source of fundamental information and data is based on thousands of papers, patents, and information from biocide manufacturers.\u003cbr\u003e\u003cbr\u003eDatabook of Biocides, Wypych, A; Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-89-8\u003cbr\u003eDatabook of Biocides contains data on the selection of the most important biocides in use today. The selection includes biocides, which are approved for use in the European Union and the USA by the current regulations. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDatabook of Preservatives, Wypych, A; Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-90-4\u003cbr\u003eDatabook of Preservatives contains data on preservatives used for products during storage and use. The following groups are included in the book: film preservatives, wood preservatives, fiber, leather, rubber and polymerized materials preservatives, construction material preservatives, preservatives for liquid cooling and processing systems, slimicides, and working or cutting fluid preservatives.\u003cbr\u003e\u003cbr\u003eHandbook of UV Degradation and Stabilization 2nd Ed., by Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-86-7\u003cbr\u003eThe first monograph fully devoted to UV degradation and stabilization, ever published in the English language, has 12 chapters, each discussing different aspect of UV-related phenomena occurring when polymeric materials are exposed to UV radiation. Over 50 polymers and rubbers and 38 groups of final products, which use the majority of UV stabilizers, are discussed including methods of stabilization.\u003cbr\u003e\u003cbr\u003eAtlas of Material Damage, 2nd Ed., Wypych, G, ChemTec Publishing, 2017, ISBN 978-1-927885-25-3\u003cbr\u003eThis book was written to emphasize the importance of the material structure in photodegradation and photostabilization and also to account for the morphological changes which occur when materials degrade. This book makes the narrative of material degradation more comprehensive, showing new ways to deal with unstable materials.\u003cbr\u003e\u003cbr\u003eDatabook of UV Stabilizers, Wypych, A; Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-88-1\u003cbr\u003eThe databook contains information on the most frequently used UV stabilizers. The information on each stabilizer included in the Databook of UV Stabilizers is divided into five sections: General information, Physical properties, Health and safety, Ecological properties, and Use \u0026amp; Performance.\u003cbr\u003e\u003cbr\u003eI hope that the information provided in the present edition of Handbook of Materials Weathering and these six books will help readers to advance their studies on particular subjects of their research and that the results of these studies will be implemented in the future editions of these books, since we try to report all most current developments to foster future discoveries. \u003cbr\u003e\u003cbr\u003eGeorge Wypych\u003cbr\u003eToronto, 2017\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003eGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 17 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st, 2nd and 3rd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives (1st and 2nd Editions), PVC Degradation \u0026amp; Stabilization, PVC Formulary, Handbook of UV Degradation and Stabilization, Handbook of Biodeterioration, Biodegradation and Biostabilization, and Handbook of Polymers (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability, and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education.\u003c\/p\u003e","published_at":"2017-06-22T21:15:02-04:00","created_at":"2017-12-21T15:48:09-05:00","vendor":"Chemtec Publishing","type":"Book","tags":["2018","additive","additives","adhesion","best","book","filler","fillers","methods of weathering","polymer","polymers","weathering"],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":5105855004703,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Material Weathering 6th Edition","public_title":null,"options":["Default Title"],"price":35000,"weight":1000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-927885-31-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-31-4.jpg?v=1513889938"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-31-4.jpg?v=1513889938","options":["Title"],"media":[{"alt":null,"id":730932936797,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-31-4.jpg?v=1513889938"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-31-4.jpg?v=1513889938","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN 978-1-927885-31-4\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: 2018\u003c\/span\u003e\u003cbr\u003ePages: 972+x\u003cbr\u003eFigures: 807\u003cbr\u003eTables: 66\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe 6th edition of Handbook of Material Weathering contains a systematic update of knowledge generated in more than last 25 years since the 1\u003csup\u003est\u003c\/sup\u003e edition was published. For example, in the last 5 years, more than 8,000 new papers (30 new papers per week) have been published on the material weathering, some of them having high importance for the weathering studies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe information required for the professional use has been growing so rapidly that additional books had to be written to accommodate essential knowledge for implementation in technological processes used to manufacture products, which deteriorate on exposure to weathering stress factors (see more information on these titles in Preface).\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eThis edition contains 22 chapters, which can be divided into the following groups:\u003cbr\u003e• Theory (photophysics and photochemistry)\u003cbr\u003e• Stress factors (parameters of exposure, measurements in assessment of weathering conditions, and climatic conditions)\u003cbr\u003e• Methods of weathering (laboratory degradation studies, weathering cycles, sample preparation, weathering data interpretation, lifetime prediction, and artificial weathering versus natural exposure)\u003cbr\u003e• Methods of testing of weathered samples (effect of weathering on material properties and testing methods of weathered specimens)\u003cbr\u003e• Weathering of polymers (data on 52 most important polymers, including mechanisms of degradation, effect of thermal history, characteristic changes in properties with graphical illustrations, and tables with numerical data)\u003cbr\u003e• Weathering of products (data on 42 groups of industrial products, including their required durability, lifetime expectation, relevant degradation mechanisms, and characteristic changes with graphical illustrations)\u003cbr\u003e• Effect of additives on weathering (12 groups of additives are discussed)\u003cbr\u003e• The most popular UV stabilizers, biocides, and preservatives used in protection of polymers, plastics and rubbers and the general principles of degradation, biodeterioration, and stabilization\u003cbr\u003e• Effect of environmental stress cracking (parameters controlling ESC, mechanisms, methods of testing, and effect on materials)\u003cbr\u003e• Specific topics (suitability of weathered materials for recycling, interrelation between corrosion and weathering, and methods of study and prevention of deterioration of historical monuments made out of stone)\u003cbr\u003e\u003cbr\u003eThe above information is based on the thorough review of published papers, patents, and other relevant sources updated by the most recent data and information. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe set of monographic sources (see more information in Preface below) was prepared for research chemists in the photochemistry field, chemists and material scientists designing new materials, users of manufactured products, those who control the quality of manufactured products, and students who want to apply their knowledge to real materials. The books are used by regulating agencies and patent and litigating attorneys. \u003cbr\u003e\u003cbr\u003eHandbook of Material Weathering is now used in more than 100 countries. It should be pointed out that many readers still use the earlier editions (as seen from the numerous citations) which lack the current information or even, more detrimental, contain outdated information which has been superseded by the more recent findings. In this fast-growing field, the access to the most recent information cannot be overemphasized. For this very reason, a new edition of this book is prepared every five years.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003ePreface\u003c\/h5\u003e\n\u003cp\u003eThe first edition of this book was published by ChemTec Publishing in 1990. The book had 18 chapters and 518 pages filled with the most up-to-date information on the subject of material weathering available in 1990.\u003cbr\u003e\u003cbr\u003eConsidering the size of the book and typesetting, the present edition is at least 3 times larger, in spite of the fact that two chapters were omitted from the fourth edition: Chapter 17. Stabilization and Stabilizers and Chapter 18. Biodegradation. Even without these, two chapters the 5th edition was larger than the previous 4th edition. The reason is quite obvious - the field is systematically growing with new data, methods, and discoveries happening every day. The 6th edition is updated by all new data and publications to produce a monograph containing all recent advances.\u003cbr\u003eIn response to requests by some users and changes in the available volume of the book by the printer (1200 pages can now be printed in one volume). The above mentioned two chapters are included in the 6th edition in their original form as they were published in the 4th edition. Information in these two chapters in most parts reflects the general understanding in these two areas of research and gives some general information on the subject. At the same time, it has to be pointed out that this field (especially biocides) changes very rapidly, therefore, several books are now available containing the up-to-date information in the following monographic sources:\u003cbr\u003e\u003cbr\u003eHandbook of Material Biodegradation, Biodeterioration, and Biostabilization, 2nd Ed. by Falkiewicz-Dulik, M, Janda, K, and Wypych, G., ChemTec Publishing, 2015, ISBN 978-1-895198-87-4\u003cbr\u003eThe book contains 11 chapters each devoted to essential aspects related to biodegradation and biostabilization of materials and products. The comprehensive source of fundamental information and data is based on thousands of papers, patents, and information from biocide manufacturers.\u003cbr\u003e\u003cbr\u003eDatabook of Biocides, Wypych, A; Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-89-8\u003cbr\u003eDatabook of Biocides contains data on the selection of the most important biocides in use today. The selection includes biocides, which are approved for use in the European Union and the USA by the current regulations. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eDatabook of Preservatives, Wypych, A; Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-90-4\u003cbr\u003eDatabook of Preservatives contains data on preservatives used for products during storage and use. The following groups are included in the book: film preservatives, wood preservatives, fiber, leather, rubber and polymerized materials preservatives, construction material preservatives, preservatives for liquid cooling and processing systems, slimicides, and working or cutting fluid preservatives.\u003cbr\u003e\u003cbr\u003eHandbook of UV Degradation and Stabilization 2nd Ed., by Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-86-7\u003cbr\u003eThe first monograph fully devoted to UV degradation and stabilization, ever published in the English language, has 12 chapters, each discussing different aspect of UV-related phenomena occurring when polymeric materials are exposed to UV radiation. Over 50 polymers and rubbers and 38 groups of final products, which use the majority of UV stabilizers, are discussed including methods of stabilization.\u003cbr\u003e\u003cbr\u003eAtlas of Material Damage, 2nd Ed., Wypych, G, ChemTec Publishing, 2017, ISBN 978-1-927885-25-3\u003cbr\u003eThis book was written to emphasize the importance of the material structure in photodegradation and photostabilization and also to account for the morphological changes which occur when materials degrade. This book makes the narrative of material degradation more comprehensive, showing new ways to deal with unstable materials.\u003cbr\u003e\u003cbr\u003eDatabook of UV Stabilizers, Wypych, A; Wypych, G, ChemTec Publishing, 2015, ISBN 978-1-895198-88-1\u003cbr\u003eThe databook contains information on the most frequently used UV stabilizers. The information on each stabilizer included in the Databook of UV Stabilizers is divided into five sections: General information, Physical properties, Health and safety, Ecological properties, and Use \u0026amp; Performance.\u003cbr\u003e\u003cbr\u003eI hope that the information provided in the present edition of Handbook of Materials Weathering and these six books will help readers to advance their studies on particular subjects of their research and that the results of these studies will be implemented in the future editions of these books, since we try to report all most current developments to foster future discoveries. \u003cbr\u003e\u003cbr\u003eGeorge Wypych\u003cbr\u003eToronto, 2017\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003eGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 17 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st, 2nd and 3rd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives (1st and 2nd Editions), PVC Degradation \u0026amp; Stabilization, PVC Formulary, Handbook of UV Degradation and Stabilization, Handbook of Biodeterioration, Biodegradation and Biostabilization, and Handbook of Polymers (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability, and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education.\u003c\/p\u003e"}
Description Author: George WypychISBN 978-1-77467-058-3 Published: Jan 2025Pages: 1024+xFigures: 830Tables: 66 Summary The 7th edition of the Handbook of Material Weathering is a comprehensive and systematic update of knowledge related to material weathering. It has been continuously revised and expanded to include the most recent advancements and discoveries in the field. The update is crucial...
$400.00
in stock
{"id":8325740429469,"title":"Handbook of Material Weathering 7th Edition","handle":"handbook-of-material-weathering-7th-edition","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e978-1-77467-058-3\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: Jan 2025\u003c\/span\u003e\u003cbr\u003ePages: 1024+x\u003cbr\u003eFigures: 830\u003cbr\u003eTables: 66\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eThe 7th edition of the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a comprehensive and systematic update of knowledge related to material weathering. It has been continuously revised and expanded to include the most recent advancements and discoveries in the field. The update is crucial because the field of material weathering has been evolving rapidly, with a substantial increase in research output in recent times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eSome key highlights of the 7th edition are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eExtensive Research: Over the last 35 years since the 1st edition, there has been a substantial increase in research in material weathering. Recently, more than 2000 new papers have been published yearly on polymer weathering, amounting to an average of about 40 new papers per week. This reflects the growing interest and importance of weathering studies in various industries and scientific communities\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eExpanding Knowledge\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The rapidly growing information required for professional use in material weathering has led to the need for additional books to accommodate essential knowledge. This indicates the increasing complexity and depth of research in the field and the need to address new challenges and applications. This is addressed by two new books that are published this year in addition to the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e, each concentrating on a separate, significant subject: \u003cb\u003eWeathering. Testing Manual\u003c\/b\u003e that concentrates on standardized and emerging test methods and \u003cb\u003eEncyclopedia of Polymer Degradation\u003c\/b\u003e that departs from the classical treatment of weathering towards chemistry-based protection of environmental impact of waste-generating, degrading materials. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eChapters and Topics\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The 7th edition of the Handbook contains 22 chapters that cover various aspects of material weathering. These chapters can be categorized into groups, such as theory (photophysics and photochemistry), stress factors (parameters of exposure, measurements, and climatic conditions), methods of weathering (laboratory degradation studies, sample preparation, etc.), and specific topics like weathering of polymers and products, the effect of additives, UV stabilizers, environmental stress cracking, and more. The table of contents below contains more details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eGlobal Reach\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is utilized in more than 100 countries, emphasizing its importance and relevance on an international scale. The book is valuable for research chemists, material scientists, manufacturers, quality controllers, and students seeking to apply their knowledge to real-world materials.\u003c\/span\u003e\u003cspan lang=\"EN-CA\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eTimely Updates\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: Access to the most recent information in the field is crucial, as older editions might contain outdated information or need more current advancements. Therefore, a new edition is prepared to ensure that readers have access to the most up-to-date and relevant information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eOverall, the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a valuable resource for professionals and researchers involved in material science, photochemistry, and related fields. It helps bridge the gap between theoretical knowledge and practical applications, aiding in developing durable and weather-resistant materials and products.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003ePreface\u003cbr\u003e1 Photophysics \u003cbr\u003e1.1 Nature of radiation \u003cbr\u003e1.2 Absorption of radiation by materials \u003cbr\u003e1.3 Fate and utilization of absorbed energy \u003cbr\u003e1.4 Radiative processes involving dimers \u003cbr\u003e1.5 Modeling and photophysical data \u003cbr\u003e2 Photochemistry \u003cbr\u003e2.1 Typical routes of photochemical reactions \u003cbr\u003e2.2 Photochemical reactivity and quantum yield \u003cbr\u003e2.3 Excitation of excited state \u003cbr\u003e2.4 Parameters of photochemical reactions \u003cbr\u003e2.5 Quenchers and photosensitizers \u003cbr\u003e3 Parameters of Exposure \u003cbr\u003e3.1 Radiation \u003cbr\u003e3.2 Temperature \u003cbr\u003e3.3 Water \u003cbr\u003e3.4 Atmosphere composition \u003cbr\u003e3.5 Pollutants \u003cbr\u003e3.6 Biological substances \u003cbr\u003e3.7 Water pollutants \u003cbr\u003e3.8 Stress \u003cbr\u003e3.9 Cooperative action of different parameters \u003cbr\u003e4 Measurements in Assessment of Weathering Conditions \u003cbr\u003e4.1 Radiation \u003cbr\u003e4.2 Sunshine duration \u003cbr\u003e4.3 Temperature \u003cbr\u003e4.4 Relative humidity \u003cbr\u003e4.5 Time of wetness \u003cbr\u003e4.6 Rain \u003cbr\u003e4.7 Pollutants \u003cbr\u003e5 Climatic Conditions \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Radiation \u003cbr\u003e5.3 Sunshine duration \u003cbr\u003e5.4 Temperature \u003cbr\u003e5.5 Precipitation \u003cbr\u003e5.6 Relative humidity \u003cbr\u003e5.7 Wetness time \u003cbr\u003e5.8 Pollutants \u003cbr\u003e5.9 Surface soiling \u003cbr\u003e6 Methods of Outdoor Exposure \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 Climatic conditions and degradation rate \u003cbr\u003e6.3 Variability of weather conditions and its impact on the strategy in outdoor exposures \u003cbr\u003e6.4 Influence of specimen properties \u003cbr\u003e6.5 Typical methods of outdoor exposure \u003cbr\u003e6.6 Other parameters of exposure \u003cbr\u003e6.7 Relevant Standards \u003cbr\u003e7 Laboratory Degradation Studies \u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Light sources \u003cbr\u003e7.3 Filters \u003cbr\u003e7.4 Radiation: delivery, monitoring, and control \u003cbr\u003e7.5 Temperature control \u003cbr\u003e7.6 Humidity control \u003cbr\u003e7.7 Specimen spraying \u003cbr\u003e7.8 Specimen racks and holders \u003cbr\u003e7.9 Weathering equipment \u003cbr\u003e7.10 Correlation between different devices \u003cbr\u003e7.11 Pollutants \u003cbr\u003e7.12 Precision of studies \u003cbr\u003e8 Weathering Cycles \u003cbr\u003e9 Sample Preparation \u003cbr\u003e10 Weathering Data Interpretation. Lifetime Prediction \u003cbr\u003e11 Artificial Weathering Versus Natural Exposure \u003cbr\u003e12 Effect of Weathering on Material Properties \u003cbr\u003e12.1 Mass loss \u003cbr\u003e12.2 Depth of degradation \u003cbr\u003e12.3 Mechanical properties \u003cbr\u003e12.4 Changes in color and optical properties \u003cbr\u003e12.5 Surface changes \u003cbr\u003e12.6 Molecular weight \u003cbr\u003e12.7 Chemical composition of surface and bulk \u003cbr\u003e12.8 Morphology and structure of surface layers \u003cbr\u003e12.9 Glass transition temperature \u003cbr\u003e12.10 Self-healing \u003cbr\u003e13 Testing Methods of Weathered Specimen \u003cbr\u003e13.1 Visual evaluation \u003cbr\u003e13.2 Microscopy \u003cbr\u003e13.3 Imaging techniques \u003cbr\u003e13.4 Gloss \u003cbr\u003e13.5 Color changes \u003cbr\u003e13.6 Visible Spectrophotometry \u003cbr\u003e13.7 UV spectrophotometry \u003cbr\u003e13.8 Infrared spectrophotometry \u003cbr\u003e13.9 Near-infrared spectroscopy \u003cbr\u003e13.10 Raman spectroscopy \u003cbr\u003e13.11 Nuclear magnetic resonance \u003cbr\u003e13.12 Electron spin resonance \u003cbr\u003e13.13 Mass spectrometry \u003cbr\u003e13.14 Positron annihilation lifetime spectroscopy \u003cbr\u003e13.15 Chemiluminescence, fluorescence, and phosphorescence \u003cbr\u003e13.16 Atomic absorption spectroscopy \u003cbr\u003e13.17 WAXS and SAXS \u003cbr\u003e13.18 X-ray photoelectron spectroscopy, XPS \u003cbr\u003e13.19 X-ray microtomography \u003cbr\u003e13.20 Mass change \u003cbr\u003e13.21 Density \u003cbr\u003e13.22 Contact angle \u003cbr\u003e13.23 Diffusion of gasses and water transport in polymers \u003cbr\u003e13.24 Electrical properties \u003cbr\u003e13.25 Ultrasonic measurements \u003cbr\u003e13.26 Thermal analysis \u003cbr\u003e13.27 Rheological properties of materials \u003cbr\u003e13.28 Other physical parameters \u003cbr\u003e13.29 Tensile strength \u003cbr\u003e13.30 Elongation \u003cbr\u003e13.31 Flexural strength \u003cbr\u003e13.32 Impact strength \u003cbr\u003e13.33 Creep and constant strain tests \u003cbr\u003e13.34 Residual stress \u003cbr\u003e13.35 Scratch and mar resistance \u003cbr\u003e13.36 Other mechanical properties \u003cbr\u003e13.37 Surface roughness \u003cbr\u003e13.38 Molecular weight \u003cbr\u003e13.39 Gas and liquid chromatography \u003cbr\u003e13.40 Titrimetry \u003cbr\u003e13.41 Dehydrochlorination rate \u003cbr\u003e13.42 Gel fraction \u003cbr\u003e13.43 Oxygen uptake \u003cbr\u003e13.44 Water absorption, porosity \u003cbr\u003e13.45 Microorganism growth test \u003cbr\u003e13.46 Environmental stress cracking resistance \u003cbr\u003e14 Data on Specific Polymers \u003cbr\u003e14.1 Acrylonitrile-butadiene-styrene, ABS \u003cbr\u003e14.2 Acrylonitrile-styrene-acrylate, ASA \u003cbr\u003e14.3 Alkyd resins \u003cbr\u003e14.4 Acrylic resins \u003cbr\u003e14.5 Cellulose \u003cbr\u003e14.6 Chitosan \u003cbr\u003e14.7 Epoxy resins \u003cbr\u003e14.8 Ethylene-propylene rubber, EPR \u003cbr\u003e14.9 Ethylene vinyl acetate copolymer, EVAc \u003cbr\u003e14.10 Ethylene propylene diene monomer, EPDM \u003cbr\u003e14.11 Fluoropolymers \u003cbr\u003e14.12 Melamine resins \u003cbr\u003e14.13 Phenoxy resins \u003cbr\u003e14.14 Polyacrylamide \u003cbr\u003e14.15 Polyacrylonitrile \u003cbr\u003e14.16 Polyamides \u003cbr\u003e14.17 Polyaniline \u003cbr\u003e14.18 Polycarbonates \u003cbr\u003e14.19 Polyesters \u003cbr\u003e14.20 Polyethylene \u003cbr\u003e14.21 Polyethylene, chlorinated \u003cbr\u003e14.22 Poly(ethylene glycol) \u003cbr\u003e14.23 Polyfluorene \u003cbr\u003e14.24 Polyimides \u003cbr\u003e14.25 Poly(lactic acid) \u003cbr\u003e14.26 Polymethylmethacrylate \u003cbr\u003e14.27 Polyoxyethylene \u003cbr\u003e14.28 Polyoxymethylene \u003cbr\u003e14.29 Poly(phenylene oxide) \u003cbr\u003e14.30 Poly(phenylene sulfide) \u003cbr\u003e14.31 Poly(-phenylene terephthalamide) \u003cbr\u003e14.32 Poly(-phenylene vinylene) \u003cbr\u003e14.33 Polypropylene \u003cbr\u003e14.34 Polystyrenes \u003cbr\u003e14.35 Polysulfones \u003cbr\u003e14.36 Polytetrafluoroethylene \u003cbr\u003e14.37 Polythiophene \u003cbr\u003e14.38 Polyurethanes \u003cbr\u003e14.39 Poly(vinyl alcohol) \u003cbr\u003e14.40 Polyvinylchloride \u003cbr\u003e14.41 Poly(vinylidene fluoride) \u003cbr\u003e14.42 Poly(vinyl methyl ether) \u003cbr\u003e14.43 Styrene-acrylonitrile copolymer \u003cbr\u003e14.44 Silicones \u003cbr\u003e14.45 Polymer blends \u003cbr\u003e14.46 Rubbers \u003cbr\u003e15 Effect of Additives on Weathering \u003cbr\u003e15.1 Fillers and reinforcing fibers \u003cbr\u003e15.2 Pigments \u003cbr\u003e15.3 Plasticizers \u003cbr\u003e15.4 Solvents and diluents \u003cbr\u003e15.5 Flame retardants \u003cbr\u003e15.6 Impact modifiers \u003cbr\u003e15.7 Thermal stabilizers \u003cbr\u003e15.8 Antioxidants \u003cbr\u003e15.9 Antimicrobial additives \u003cbr\u003e15.10 Curatives, crosslinkers, initiators \u003cbr\u003e15.11 Catalysts \u003cbr\u003e15.12 Compatibilizer \u003cbr\u003e15.12 Impurities \u003cbr\u003e15.13 Summary \u003cbr\u003e16 Weathering of Compounded Products \u003cbr\u003e16.1 Adhesives \u003cbr\u003e16.2 Aerospace \u003cbr\u003e16.3 Agriculture \u003cbr\u003e16.4 Appliances \u003cbr\u003e16.5 Automotive parts \u003cbr\u003e16.6 Automotive coatings \u003cbr\u003e16.7 Coated fabrics \u003cbr\u003e16.8 Coil-coated materials \u003cbr\u003e16.9 Composites \u003cbr\u003e16.10 Concrete \u003cbr\u003e16.11 Conservation \u003cbr\u003e16.12 Construction materials \u003cbr\u003e16.13 Cosmetics \u003cbr\u003e16.14 Dental materials \u003cbr\u003e16.15 Electronics and electrical materials \u003cbr\u003e16.16 Environmental pollutants \u003cbr\u003e16.17 Foams \u003cbr\u003e16.18 Food \u003cbr\u003e16.19 Gel coats \u003cbr\u003e16.20 Geosynthetics \u003cbr\u003e16.21 Glass and glazing materials \u003cbr\u003e16.22 Greenhouse film \u003cbr\u003e16.23 Hair \u003cbr\u003e16.24 Laminates \u003cbr\u003e16.25 Medical equipment and supplies \u003cbr\u003e16.26 Military applications \u003cbr\u003e16.27 Molded materials \u003cbr\u003e16.28 Packaging materials \u003cbr\u003e16.29 Paints and coatings \u003cbr\u003e16.30 Pavements \u003cbr\u003e16.31 Pharmaceutical products \u003cbr\u003e16.32 Pipes and tubing \u003cbr\u003e16.33 Pulp and paper \u003cbr\u003e16.34 Roofing materials \u003cbr\u003e16.35 Sealants \u003cbr\u003e16.36 Sheet \u003cbr\u003e16.37 Siding \u003cbr\u003e16.38 Solar cells and collectors \u003cbr\u003e16.39 Textiles \u003cbr\u003e16.40 Windows \u003cbr\u003e16.41 Wire and cable \u003cbr\u003e16.42 Wood \u003cbr\u003e17 Stabilization and Stabilizers \u003cbr\u003e17.1 Limiting the incoming radiation \u003cbr\u003e17.2 Deactivation of excited states and free radicals \u003cbr\u003e17.3 Elimination of singlet oxygen, peroxide decomposition, and limiting oxidative changes \u003cbr\u003e17.4 Defect removal \u003cbr\u003e17.5 Stability of UV stabilizers \u003cbr\u003e17.6 Distribution of UV absorber \u003cbr\u003e17.7 Stabilizer entrapment and interaction \u003cbr\u003e17.8 Protective coatings \u003cbr\u003e17.9 Examples of stabilization technology \u003cbr\u003e18 Biodegradation \u003cbr\u003e18.1 Biodegradation environment \u003cbr\u003e18.2 Enzymatic reactions \u003cbr\u003e18.3 Biodegradation of materials \u003cbr\u003e18.4 Biocides \u003cbr\u003e18.5 Methods of testing \u003cbr\u003e18.6 Controlled biodegradation \u003cbr\u003e19 Recycling \u003cbr\u003e19.1 Effect of degradation on recycling \u003cbr\u003e19.2 Re-stabilization of material for recycling \u003cbr\u003e19.3 Multilayer materials \u003cbr\u003e19.4 Removable paint \u003cbr\u003e19.5 Chemical recycling \u003cbr\u003e20 Environmental Stress Cracking \u003cbr\u003e20.1 Definitions \u003cbr\u003e20.2 Parameters controlling ESC \u003cbr\u003e20.3 Mechanisms of environmental stress cracking \u003cbr\u003e20.4 Kinetics of environmental stress cracking \u003cbr\u003e20.5 Effect of ESC on material durability \u003cbr\u003e20.6 Methods of testing \u003cbr\u003e21 Interrelation Between Corrosion and Weathering \u003cbr\u003e22 Weathering of Stones \u003cbr\u003eIndex \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-12T09:42:22-04:00","created_at":"2024-06-12T09:34:49-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2025","additive","additives","adhesion","best","book","filler","fillers","methods of weathering","new","polymer","polymers","weathering"],"price":40000,"price_min":40000,"price_max":40000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45528733253789,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Material Weathering 7th Edition","public_title":null,"options":["Default Title"],"price":40000,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-77467-058-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666","options":["Title"],"media":[{"alt":null,"id":29565566976157,"position":1,"preview_image":{"aspect_ratio":0.713,"height":450,"width":321,"src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666"},"aspect_ratio":0.713,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670583-Case_137bd831-26b8-4035-ac2a-5b74baaad589.jpg?v=1718199666","width":321}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e978-1-77467-058-3\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePublished: Jan 2025\u003c\/span\u003e\u003cbr\u003ePages: 1024+x\u003cbr\u003eFigures: 830\u003cbr\u003eTables: 66\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eThe 7th edition of the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a comprehensive and systematic update of knowledge related to material weathering. It has been continuously revised and expanded to include the most recent advancements and discoveries in the field. The update is crucial because the field of material weathering has been evolving rapidly, with a substantial increase in research output in recent times.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eSome key highlights of the 7th edition are:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eExtensive Research: Over the last 35 years since the 1st edition, there has been a substantial increase in research in material weathering. Recently, more than 2000 new papers have been published yearly on polymer weathering, amounting to an average of about 40 new papers per week. This reflects the growing interest and importance of weathering studies in various industries and scientific communities\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eExpanding Knowledge\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The rapidly growing information required for professional use in material weathering has led to the need for additional books to accommodate essential knowledge. This indicates the increasing complexity and depth of research in the field and the need to address new challenges and applications. This is addressed by two new books that are published this year in addition to the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e, each concentrating on a separate, significant subject: \u003cb\u003eWeathering. Testing Manual\u003c\/b\u003e that concentrates on standardized and emerging test methods and \u003cb\u003eEncyclopedia of Polymer Degradation\u003c\/b\u003e that departs from the classical treatment of weathering towards chemistry-based protection of environmental impact of waste-generating, degrading materials. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eChapters and Topics\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The 7th edition of the Handbook contains 22 chapters that cover various aspects of material weathering. These chapters can be categorized into groups, such as theory (photophysics and photochemistry), stress factors (parameters of exposure, measurements, and climatic conditions), methods of weathering (laboratory degradation studies, sample preparation, etc.), and specific topics like weathering of polymers and products, the effect of additives, UV stabilizers, environmental stress cracking, and more. The table of contents below contains more details.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eGlobal Reach\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: The \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is utilized in more than 100 countries, emphasizing its importance and relevance on an international scale. The book is valuable for research chemists, material scientists, manufacturers, quality controllers, and students seeking to apply their knowledge to real-world materials.\u003c\/span\u003e\u003cspan lang=\"EN-CA\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003ci\u003e\u003cspan lang=\"EN-CA\"\u003eTimely Updates\u003c\/span\u003e\u003c\/i\u003e\u003cspan lang=\"EN-CA\"\u003e: Access to the most recent information in the field is crucial, as older editions might contain outdated information or need more current advancements. Therefore, a new edition is prepared to ensure that readers have access to the most up-to-date and relevant information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan lang=\"EN-CA\"\u003eOverall, the \u003cb\u003eHandbook of Material Weathering\u003c\/b\u003e is a valuable resource for professionals and researchers involved in material science, photochemistry, and related fields. It helps bridge the gap between theoretical knowledge and practical applications, aiding in developing durable and weather-resistant materials and products.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003ePreface\u003cbr\u003e1 Photophysics \u003cbr\u003e1.1 Nature of radiation \u003cbr\u003e1.2 Absorption of radiation by materials \u003cbr\u003e1.3 Fate and utilization of absorbed energy \u003cbr\u003e1.4 Radiative processes involving dimers \u003cbr\u003e1.5 Modeling and photophysical data \u003cbr\u003e2 Photochemistry \u003cbr\u003e2.1 Typical routes of photochemical reactions \u003cbr\u003e2.2 Photochemical reactivity and quantum yield \u003cbr\u003e2.3 Excitation of excited state \u003cbr\u003e2.4 Parameters of photochemical reactions \u003cbr\u003e2.5 Quenchers and photosensitizers \u003cbr\u003e3 Parameters of Exposure \u003cbr\u003e3.1 Radiation \u003cbr\u003e3.2 Temperature \u003cbr\u003e3.3 Water \u003cbr\u003e3.4 Atmosphere composition \u003cbr\u003e3.5 Pollutants \u003cbr\u003e3.6 Biological substances \u003cbr\u003e3.7 Water pollutants \u003cbr\u003e3.8 Stress \u003cbr\u003e3.9 Cooperative action of different parameters \u003cbr\u003e4 Measurements in Assessment of Weathering Conditions \u003cbr\u003e4.1 Radiation \u003cbr\u003e4.2 Sunshine duration \u003cbr\u003e4.3 Temperature \u003cbr\u003e4.4 Relative humidity \u003cbr\u003e4.5 Time of wetness \u003cbr\u003e4.6 Rain \u003cbr\u003e4.7 Pollutants \u003cbr\u003e5 Climatic Conditions \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Radiation \u003cbr\u003e5.3 Sunshine duration \u003cbr\u003e5.4 Temperature \u003cbr\u003e5.5 Precipitation \u003cbr\u003e5.6 Relative humidity \u003cbr\u003e5.7 Wetness time \u003cbr\u003e5.8 Pollutants \u003cbr\u003e5.9 Surface soiling \u003cbr\u003e6 Methods of Outdoor Exposure \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 Climatic conditions and degradation rate \u003cbr\u003e6.3 Variability of weather conditions and its impact on the strategy in outdoor exposures \u003cbr\u003e6.4 Influence of specimen properties \u003cbr\u003e6.5 Typical methods of outdoor exposure \u003cbr\u003e6.6 Other parameters of exposure \u003cbr\u003e6.7 Relevant Standards \u003cbr\u003e7 Laboratory Degradation Studies \u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Light sources \u003cbr\u003e7.3 Filters \u003cbr\u003e7.4 Radiation: delivery, monitoring, and control \u003cbr\u003e7.5 Temperature control \u003cbr\u003e7.6 Humidity control \u003cbr\u003e7.7 Specimen spraying \u003cbr\u003e7.8 Specimen racks and holders \u003cbr\u003e7.9 Weathering equipment \u003cbr\u003e7.10 Correlation between different devices \u003cbr\u003e7.11 Pollutants \u003cbr\u003e7.12 Precision of studies \u003cbr\u003e8 Weathering Cycles \u003cbr\u003e9 Sample Preparation \u003cbr\u003e10 Weathering Data Interpretation. Lifetime Prediction \u003cbr\u003e11 Artificial Weathering Versus Natural Exposure \u003cbr\u003e12 Effect of Weathering on Material Properties \u003cbr\u003e12.1 Mass loss \u003cbr\u003e12.2 Depth of degradation \u003cbr\u003e12.3 Mechanical properties \u003cbr\u003e12.4 Changes in color and optical properties \u003cbr\u003e12.5 Surface changes \u003cbr\u003e12.6 Molecular weight \u003cbr\u003e12.7 Chemical composition of surface and bulk \u003cbr\u003e12.8 Morphology and structure of surface layers \u003cbr\u003e12.9 Glass transition temperature \u003cbr\u003e12.10 Self-healing \u003cbr\u003e13 Testing Methods of Weathered Specimen \u003cbr\u003e13.1 Visual evaluation \u003cbr\u003e13.2 Microscopy \u003cbr\u003e13.3 Imaging techniques \u003cbr\u003e13.4 Gloss \u003cbr\u003e13.5 Color changes \u003cbr\u003e13.6 Visible Spectrophotometry \u003cbr\u003e13.7 UV spectrophotometry \u003cbr\u003e13.8 Infrared spectrophotometry \u003cbr\u003e13.9 Near-infrared spectroscopy \u003cbr\u003e13.10 Raman spectroscopy \u003cbr\u003e13.11 Nuclear magnetic resonance \u003cbr\u003e13.12 Electron spin resonance \u003cbr\u003e13.13 Mass spectrometry \u003cbr\u003e13.14 Positron annihilation lifetime spectroscopy \u003cbr\u003e13.15 Chemiluminescence, fluorescence, and phosphorescence \u003cbr\u003e13.16 Atomic absorption spectroscopy \u003cbr\u003e13.17 WAXS and SAXS \u003cbr\u003e13.18 X-ray photoelectron spectroscopy, XPS \u003cbr\u003e13.19 X-ray microtomography \u003cbr\u003e13.20 Mass change \u003cbr\u003e13.21 Density \u003cbr\u003e13.22 Contact angle \u003cbr\u003e13.23 Diffusion of gasses and water transport in polymers \u003cbr\u003e13.24 Electrical properties \u003cbr\u003e13.25 Ultrasonic measurements \u003cbr\u003e13.26 Thermal analysis \u003cbr\u003e13.27 Rheological properties of materials \u003cbr\u003e13.28 Other physical parameters \u003cbr\u003e13.29 Tensile strength \u003cbr\u003e13.30 Elongation \u003cbr\u003e13.31 Flexural strength \u003cbr\u003e13.32 Impact strength \u003cbr\u003e13.33 Creep and constant strain tests \u003cbr\u003e13.34 Residual stress \u003cbr\u003e13.35 Scratch and mar resistance \u003cbr\u003e13.36 Other mechanical properties \u003cbr\u003e13.37 Surface roughness \u003cbr\u003e13.38 Molecular weight \u003cbr\u003e13.39 Gas and liquid chromatography \u003cbr\u003e13.40 Titrimetry \u003cbr\u003e13.41 Dehydrochlorination rate \u003cbr\u003e13.42 Gel fraction \u003cbr\u003e13.43 Oxygen uptake \u003cbr\u003e13.44 Water absorption, porosity \u003cbr\u003e13.45 Microorganism growth test \u003cbr\u003e13.46 Environmental stress cracking resistance \u003cbr\u003e14 Data on Specific Polymers \u003cbr\u003e14.1 Acrylonitrile-butadiene-styrene, ABS \u003cbr\u003e14.2 Acrylonitrile-styrene-acrylate, ASA \u003cbr\u003e14.3 Alkyd resins \u003cbr\u003e14.4 Acrylic resins \u003cbr\u003e14.5 Cellulose \u003cbr\u003e14.6 Chitosan \u003cbr\u003e14.7 Epoxy resins \u003cbr\u003e14.8 Ethylene-propylene rubber, EPR \u003cbr\u003e14.9 Ethylene vinyl acetate copolymer, EVAc \u003cbr\u003e14.10 Ethylene propylene diene monomer, EPDM \u003cbr\u003e14.11 Fluoropolymers \u003cbr\u003e14.12 Melamine resins \u003cbr\u003e14.13 Phenoxy resins \u003cbr\u003e14.14 Polyacrylamide \u003cbr\u003e14.15 Polyacrylonitrile \u003cbr\u003e14.16 Polyamides \u003cbr\u003e14.17 Polyaniline \u003cbr\u003e14.18 Polycarbonates \u003cbr\u003e14.19 Polyesters \u003cbr\u003e14.20 Polyethylene \u003cbr\u003e14.21 Polyethylene, chlorinated \u003cbr\u003e14.22 Poly(ethylene glycol) \u003cbr\u003e14.23 Polyfluorene \u003cbr\u003e14.24 Polyimides \u003cbr\u003e14.25 Poly(lactic acid) \u003cbr\u003e14.26 Polymethylmethacrylate \u003cbr\u003e14.27 Polyoxyethylene \u003cbr\u003e14.28 Polyoxymethylene \u003cbr\u003e14.29 Poly(phenylene oxide) \u003cbr\u003e14.30 Poly(phenylene sulfide) \u003cbr\u003e14.31 Poly(-phenylene terephthalamide) \u003cbr\u003e14.32 Poly(-phenylene vinylene) \u003cbr\u003e14.33 Polypropylene \u003cbr\u003e14.34 Polystyrenes \u003cbr\u003e14.35 Polysulfones \u003cbr\u003e14.36 Polytetrafluoroethylene \u003cbr\u003e14.37 Polythiophene \u003cbr\u003e14.38 Polyurethanes \u003cbr\u003e14.39 Poly(vinyl alcohol) \u003cbr\u003e14.40 Polyvinylchloride \u003cbr\u003e14.41 Poly(vinylidene fluoride) \u003cbr\u003e14.42 Poly(vinyl methyl ether) \u003cbr\u003e14.43 Styrene-acrylonitrile copolymer \u003cbr\u003e14.44 Silicones \u003cbr\u003e14.45 Polymer blends \u003cbr\u003e14.46 Rubbers \u003cbr\u003e15 Effect of Additives on Weathering \u003cbr\u003e15.1 Fillers and reinforcing fibers \u003cbr\u003e15.2 Pigments \u003cbr\u003e15.3 Plasticizers \u003cbr\u003e15.4 Solvents and diluents \u003cbr\u003e15.5 Flame retardants \u003cbr\u003e15.6 Impact modifiers \u003cbr\u003e15.7 Thermal stabilizers \u003cbr\u003e15.8 Antioxidants \u003cbr\u003e15.9 Antimicrobial additives \u003cbr\u003e15.10 Curatives, crosslinkers, initiators \u003cbr\u003e15.11 Catalysts \u003cbr\u003e15.12 Compatibilizer \u003cbr\u003e15.12 Impurities \u003cbr\u003e15.13 Summary \u003cbr\u003e16 Weathering of Compounded Products \u003cbr\u003e16.1 Adhesives \u003cbr\u003e16.2 Aerospace \u003cbr\u003e16.3 Agriculture \u003cbr\u003e16.4 Appliances \u003cbr\u003e16.5 Automotive parts \u003cbr\u003e16.6 Automotive coatings \u003cbr\u003e16.7 Coated fabrics \u003cbr\u003e16.8 Coil-coated materials \u003cbr\u003e16.9 Composites \u003cbr\u003e16.10 Concrete \u003cbr\u003e16.11 Conservation \u003cbr\u003e16.12 Construction materials \u003cbr\u003e16.13 Cosmetics \u003cbr\u003e16.14 Dental materials \u003cbr\u003e16.15 Electronics and electrical materials \u003cbr\u003e16.16 Environmental pollutants \u003cbr\u003e16.17 Foams \u003cbr\u003e16.18 Food \u003cbr\u003e16.19 Gel coats \u003cbr\u003e16.20 Geosynthetics \u003cbr\u003e16.21 Glass and glazing materials \u003cbr\u003e16.22 Greenhouse film \u003cbr\u003e16.23 Hair \u003cbr\u003e16.24 Laminates \u003cbr\u003e16.25 Medical equipment and supplies \u003cbr\u003e16.26 Military applications \u003cbr\u003e16.27 Molded materials \u003cbr\u003e16.28 Packaging materials \u003cbr\u003e16.29 Paints and coatings \u003cbr\u003e16.30 Pavements \u003cbr\u003e16.31 Pharmaceutical products \u003cbr\u003e16.32 Pipes and tubing \u003cbr\u003e16.33 Pulp and paper \u003cbr\u003e16.34 Roofing materials \u003cbr\u003e16.35 Sealants \u003cbr\u003e16.36 Sheet \u003cbr\u003e16.37 Siding \u003cbr\u003e16.38 Solar cells and collectors \u003cbr\u003e16.39 Textiles \u003cbr\u003e16.40 Windows \u003cbr\u003e16.41 Wire and cable \u003cbr\u003e16.42 Wood \u003cbr\u003e17 Stabilization and Stabilizers \u003cbr\u003e17.1 Limiting the incoming radiation \u003cbr\u003e17.2 Deactivation of excited states and free radicals \u003cbr\u003e17.3 Elimination of singlet oxygen, peroxide decomposition, and limiting oxidative changes \u003cbr\u003e17.4 Defect removal \u003cbr\u003e17.5 Stability of UV stabilizers \u003cbr\u003e17.6 Distribution of UV absorber \u003cbr\u003e17.7 Stabilizer entrapment and interaction \u003cbr\u003e17.8 Protective coatings \u003cbr\u003e17.9 Examples of stabilization technology \u003cbr\u003e18 Biodegradation \u003cbr\u003e18.1 Biodegradation environment \u003cbr\u003e18.2 Enzymatic reactions \u003cbr\u003e18.3 Biodegradation of materials \u003cbr\u003e18.4 Biocides \u003cbr\u003e18.5 Methods of testing \u003cbr\u003e18.6 Controlled biodegradation \u003cbr\u003e19 Recycling \u003cbr\u003e19.1 Effect of degradation on recycling \u003cbr\u003e19.2 Re-stabilization of material for recycling \u003cbr\u003e19.3 Multilayer materials \u003cbr\u003e19.4 Removable paint \u003cbr\u003e19.5 Chemical recycling \u003cbr\u003e20 Environmental Stress Cracking \u003cbr\u003e20.1 Definitions \u003cbr\u003e20.2 Parameters controlling ESC \u003cbr\u003e20.3 Mechanisms of environmental stress cracking \u003cbr\u003e20.4 Kinetics of environmental stress cracking \u003cbr\u003e20.5 Effect of ESC on material durability \u003cbr\u003e20.6 Methods of testing \u003cbr\u003e21 Interrelation Between Corrosion and Weathering \u003cbr\u003e22 Weathering of Stones \u003cbr\u003eIndex \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/span\u003e\u003c\/p\u003e"}
Description Author: Jerry M. Fischer ISBN 1-884207-72-3 Tools and Troubleshooting, Inc., USApages 252, figures : 302 Summary This is the first and only handbook to deal with these fundamental problems. The handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effects of the molding...
$260.00
in stock
{"id":11242222660,"title":"Handbook of Molded Part Shrinkage and Warpage","handle":"1-884207-72-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Jerry M. Fischer \u003cbr\u003eISBN 1-884207-72-3 \u003cbr\u003e\u003cbr\u003eTools and Troubleshooting, Inc., USA\u003cbr\u003e\u003cbr\u003epages 252, figures : 302\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis is the first and only handbook to deal with these fundamental problems. \u003cbr\u003e\u003cbr\u003eThe handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effects of the molding process conditions, and reveals why you never can have a single \"correct\" shrinkage value. But, that's not all. The handbook shows you how to alleviate problems by careful design of the molded part and the mold, careful selection of materials, and proper process techniques. It examines computer-aided methods of forecasting shrinkage and warpage. And, most important of all, the handbook provides representative data to work with. \u003cbr\u003e\u003cbr\u003eThis is the most comprehensive collection of shrinkage data ever compiled in a book and includes hard-to-find multi-point information on how materials, part design, mold design processing, and post mold treatment affect the part's shrinkage and warpage. This book for all people who live and work with mold and shrinkage and warpage.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction to Plastics Processing\u003cbr\u003e1.1. Interactivity Basics \u003cbr\u003e1.2. Thermodynamic Principles Governing Injection Molding\u003cbr\u003e1.2.1 Filling\u003cbr\u003e1.2.2 Holding\u003cbr\u003e1.2.3 Cooling \u003cbr\u003e\u003cbr\u003e2. Shrinkage and Warpage\u003cbr\u003e2.1 Mold Shrinkage \u003cbr\u003e2.1.1 Determination of Shrinkage\u003cbr\u003e2.1.2 Molded-in Stress\u003cbr\u003e2.2 Warpage \u003cbr\u003e2.2.1 Common Causes of Non-Uniform Shrinkage\u003cbr\u003e2.2.2 principles of Minimizing Warpage \u003cbr\u003e2.3 Post-Mold Shrinkage \u003cbr\u003e\u003cbr\u003e3. Causes of Molded Part Variation - Part Design \u003cbr\u003e3.1 Wall Thickness\u003cbr\u003e3.2 Ribs\u003cbr\u003e3.3 Bosses\u003cbr\u003e3.4 Example of Proper Part Design\u003cbr\u003e3.5 Other Design Consideration \u003cbr\u003e\u003cbr\u003e4. Causes of Molded Part Variation - Material \u003cbr\u003e4.1 Amorphous and Semi-Crystalline Resins \u003cbr\u003e4.1.1 Amorphous Materials\u003cbr\u003e4.1.2 Semi-Crystalline Materials\u003cbr\u003e4.2 Effects of Fillers, Reinforcements, Pigments, Time and Stress\u003cbr\u003e4.2.1 Effects of Fillers and Fibers\u003cbr\u003e4.2.2 Minimizing the Effects of Fiber Reinforcements\u003cbr\u003e4.2.3 Effects of Pigments\u003cbr\u003e4.2.4 Effects of Time and Stress\u003cbr\u003e4.3 Shrinkage Prediction : Pressure-Volume-Temperature (PVT) Behavior \u003cbr\u003e4.3.1 PVT System Properties\u003cbr\u003e4.3.2 Predicting Mold Shrinkage\u003cbr\u003e4.3.3 Accuracy of Shrinkage Prediction \u003cbr\u003e\u003cbr\u003e5. Causes of Molded Part Variation - Mold Design \u003cbr\u003e5.1 Cavity Dimensions and Design Factors \u003cbr\u003e5.2 Gate Types\u003cbr\u003e5.2.1 Sprue Gate\u003cbr\u003e5.2.2 Pin, Pinpoint, Tunnel, and Submarine Gates\u003cbr\u003e5.2.3 Edge and Straight Gates\u003cbr\u003e5.2.4 Fan, Film, Diaphram, Ring, Disk, Cone, and Double-Sided Gates\u003cbr\u003e5.2.5 Multiple Gates\u003cbr\u003e\u003cbr\u003e5.3 Gate Location \u003cbr\u003e5.3.1 Side and End gates\u003cbr\u003e5.3.2 Determining Gate Position \u003cbr\u003e5.4 Gate Size \u003cbr\u003e5.5 Gate Design Systems\u003cbr\u003e5.6 Runner Design \u003cbr\u003e5.6.1 Multiple Cavity Molds\u003cbr\u003e5.6.2 Poor Ejection\u003cbr\u003e5.7 Mold Cooling Design\u003cbr\u003e5.7.1 Cooling Channels\u003cbr\u003e5.7.2 Effects of Corners\u003cbr\u003e5.7.3 Thickness Variations\u003cbr\u003e5.7.4 Runnerless Molds\u003cbr\u003e5.7.5 Slides\u003cbr\u003e5.7.6 Venting \u003cbr\u003e5.8 Mold Construction Materials\u003cbr\u003e5.9 Annealing \u003cbr\u003e5.10 Gas Assist \u003cbr\u003e5.11 Pitfalls to Avoid \u003cbr\u003e\u003cbr\u003e6. Causes of Molded Part Variation - Processing \u003cbr\u003e6.1 Molding Conditions\u003cbr\u003e6.1 (Injection melt Temperature) - if should be a separate section, renumber as 6.2 and renumber subsequent sections)\u003cbr\u003e6.2 Injection Rate\/Pressure\u003cbr\u003e6.2.1 Injection Speed\u003cbr\u003e6.2.2 Injection Pressure\u003cbr\u003e6.3 Holding Pressure\/Time\u003cbr\u003e6.3.1 Holding Pressure \u003cbr\u003e6.3.2 Holding pressure Time\u003cbr\u003e6.4 Mold Temperature\u003cbr\u003e6.4.1 Predicting mold Temperature Effects\u003cbr\u003e6.4.2 Relationship Between Mold Temperature and Wall Thickness\u003cbr\u003e6.5 Demolding Temperature\u003cbr\u003e6.6 Molded-in Stresses\u003cbr\u003e\u003cbr\u003e7. Factors Affecting Post-Mold Shrinkage\u003cbr\u003e7.1 Effects of Temperatures on Dimensions\u003cbr\u003e7.2 Effects of Moisture on Dimensions\u003cbr\u003e\u003cbr\u003e8. How to Control Mold and Post-mold Shrinkage and Warpage \u003cbr\u003e8.1 Find the Cause\u003cbr\u003e8.2 Part Geometry\u003cbr\u003e8.2.1 Overall Part Dimensions\u003cbr\u003e8.2.2 Wall Thickness\u003cbr\u003e8.2.3 Shrinkage Restricting Features\u003cbr\u003e8.3 Material Consideration\u003cbr\u003e8.3.1 Filler or Reinforcement Content\u003cbr\u003e8.3.2 Degree of Moisture Absorption\u003cbr\u003e8.4 Tooling Considerations \u003cbr\u003e8.4.1 Gate Locations\u003cbr\u003e8.4.2 Types and Sizes of Gates\u003cbr\u003e8.4.3 Runner Systems\u003cbr\u003e8.4.4 Mold Cooling Layout\u003cbr\u003e8.4.5 Tool Tolerances \u003cbr\u003e8.4.6 Draft Angles \u003cbr\u003e8.4.7 Ejection system Design\u003cbr\u003e8.4.8 Elastic Deformation of Mold\u003cbr\u003e8.4.9 Mold Wear\u003cbr\u003e8.4.10 Mold Contamination\u003cbr\u003e8.4.11 Position Deviations of Movable Mold Components\u003cbr\u003e8.4.12 Special Issues with Gears\u003cbr\u003e8.5 Processing Considerations\u003cbr\u003e8.5.1 Melt Temperatures and Uniformity \u003cbr\u003e8.5.2 Mold Temperatures and Uniformity \u003cbr\u003e8.5.3 Filling, Packing, and Holding Pressures\u003cbr\u003e8.5.4 Filling, Packing, and Holding Times\u003cbr\u003e8.5.5 Part Temperature at Ejection\u003cbr\u003e8.5.6 Clamp Tonnage\u003cbr\u003e8.5.7 Post-Mold Fixturing\/Annealing\u003cbr\u003e8.5.8 Special Problems with Thick Walls and Sink Marks\u003cbr\u003e8.5.9 Nozzles \u003cbr\u003e8.5.10 Excessive or Insufficient Shrinkage\u003cbr\u003e8.5.11 Secondary Machining\u003cbr\u003e8.5.12 Quality Control\u003cbr\u003e8.6 Controlling Warpage \u003cbr\u003e\u003cbr\u003e9. Computer Analysis\u003cbr\u003e9.1 How It Works\u003cbr\u003e9.1.1 Assumptions \u003cbr\u003e9.1.2 Generic Elements and Potential Limitations\u003cbr\u003e9.2 Does It Work \u003cbr\u003e9.2.1 Machine Settings and Controls\u003cbr\u003e9.2.2 Different Parts, Different Problems \u003cbr\u003e9.2.3 Differing Capabilities of Software\u003cbr\u003e9.3 What are Realistic Expectations of CAE?\u003cbr\u003e9.4 Resources\u003cbr\u003e9.4.1 How Much Does it Cost?\u003cbr\u003e9.4.2 Consultants \u003cbr\u003e9.5 OR Chapter 9 Appendix: Extended Illustration\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e10. Case studies\u003cbr\u003e10.1 Unexpected Housing Shrink and Combing of the Glass Fibers\u003cbr\u003e10.2 Changing Materials Triggers Warpage \u003cbr\u003e10.3 Thin-Molded Lids\u003cbr\u003e10.4 Oversize Part Injection Molding Alkyd Thermoset\u003cbr\u003e10.5 Inadequate Mold: Baby Dish\u003cbr\u003e10.6 Gas Entrapment: Baby Dish\u003cbr\u003e10.7 Sprue and Runners\u003cbr\u003e10.8 Spool Mold \u003cbr\u003e10.9 Thermoplastic Engineering Design Study \u003cbr\u003e10.10 CDs\u003cbr\u003e10.11 Flat Parts\u003cbr\u003e10.12 Electronic Connectors\u003cbr\u003eData\u003cbr\u003eGlossary\u003cbr\u003eAbbreviations \u003cbr\u003eReferences\u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJerry Fischer, CEO of Tools and Troubleshooting, Inc., brings to this handbook over 35 years experience as a mold designer and builder and consultant on mold shrinkage and warpage conditions. In the 1980s, Jerry published two books with McGraw-Hill on computer-aided design.","published_at":"2017-06-22T21:13:50-04:00","created_at":"2017-06-22T21:13:50-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","blow molding","book","compression molding","cooling","extrusion","fabrication","fillers","fluoropolymers","gate types","injection molding","injection rate","melt-processible","mold design","mould","moulding","p-processing","polymer","polymerization","reinforcement","rotational molding","shrinkage","tooling","transfer molding","tube","warpage","wire"],"price":26000,"price_min":26000,"price_max":26000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378376452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Molded Part Shrinkage and Warpage","public_title":null,"options":["Default Title"],"price":26000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"1-884207-72-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/1-884207-72-3.jpg?v=1499442251"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/1-884207-72-3.jpg?v=1499442251","options":["Title"],"media":[{"alt":null,"id":355727966301,"position":1,"preview_image":{"aspect_ratio":0.776,"height":499,"width":387,"src":"\/\/chemtec.org\/cdn\/shop\/products\/1-884207-72-3.jpg?v=1499442251"},"aspect_ratio":0.776,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/1-884207-72-3.jpg?v=1499442251","width":387}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Jerry M. Fischer \u003cbr\u003eISBN 1-884207-72-3 \u003cbr\u003e\u003cbr\u003eTools and Troubleshooting, Inc., USA\u003cbr\u003e\u003cbr\u003epages 252, figures : 302\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis is the first and only handbook to deal with these fundamental problems. \u003cbr\u003e\u003cbr\u003eThe handbook explains in plain terms why moldings shrink and warp, shows how additives and reinforcements change the picture, sets out the effects of the molding process conditions, and reveals why you never can have a single \"correct\" shrinkage value. But, that's not all. The handbook shows you how to alleviate problems by careful design of the molded part and the mold, careful selection of materials, and proper process techniques. It examines computer-aided methods of forecasting shrinkage and warpage. And, most important of all, the handbook provides representative data to work with. \u003cbr\u003e\u003cbr\u003eThis is the most comprehensive collection of shrinkage data ever compiled in a book and includes hard-to-find multi-point information on how materials, part design, mold design processing, and post mold treatment affect the part's shrinkage and warpage. This book for all people who live and work with mold and shrinkage and warpage.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction to Plastics Processing\u003cbr\u003e1.1. Interactivity Basics \u003cbr\u003e1.2. Thermodynamic Principles Governing Injection Molding\u003cbr\u003e1.2.1 Filling\u003cbr\u003e1.2.2 Holding\u003cbr\u003e1.2.3 Cooling \u003cbr\u003e\u003cbr\u003e2. Shrinkage and Warpage\u003cbr\u003e2.1 Mold Shrinkage \u003cbr\u003e2.1.1 Determination of Shrinkage\u003cbr\u003e2.1.2 Molded-in Stress\u003cbr\u003e2.2 Warpage \u003cbr\u003e2.2.1 Common Causes of Non-Uniform Shrinkage\u003cbr\u003e2.2.2 principles of Minimizing Warpage \u003cbr\u003e2.3 Post-Mold Shrinkage \u003cbr\u003e\u003cbr\u003e3. Causes of Molded Part Variation - Part Design \u003cbr\u003e3.1 Wall Thickness\u003cbr\u003e3.2 Ribs\u003cbr\u003e3.3 Bosses\u003cbr\u003e3.4 Example of Proper Part Design\u003cbr\u003e3.5 Other Design Consideration \u003cbr\u003e\u003cbr\u003e4. Causes of Molded Part Variation - Material \u003cbr\u003e4.1 Amorphous and Semi-Crystalline Resins \u003cbr\u003e4.1.1 Amorphous Materials\u003cbr\u003e4.1.2 Semi-Crystalline Materials\u003cbr\u003e4.2 Effects of Fillers, Reinforcements, Pigments, Time and Stress\u003cbr\u003e4.2.1 Effects of Fillers and Fibers\u003cbr\u003e4.2.2 Minimizing the Effects of Fiber Reinforcements\u003cbr\u003e4.2.3 Effects of Pigments\u003cbr\u003e4.2.4 Effects of Time and Stress\u003cbr\u003e4.3 Shrinkage Prediction : Pressure-Volume-Temperature (PVT) Behavior \u003cbr\u003e4.3.1 PVT System Properties\u003cbr\u003e4.3.2 Predicting Mold Shrinkage\u003cbr\u003e4.3.3 Accuracy of Shrinkage Prediction \u003cbr\u003e\u003cbr\u003e5. Causes of Molded Part Variation - Mold Design \u003cbr\u003e5.1 Cavity Dimensions and Design Factors \u003cbr\u003e5.2 Gate Types\u003cbr\u003e5.2.1 Sprue Gate\u003cbr\u003e5.2.2 Pin, Pinpoint, Tunnel, and Submarine Gates\u003cbr\u003e5.2.3 Edge and Straight Gates\u003cbr\u003e5.2.4 Fan, Film, Diaphram, Ring, Disk, Cone, and Double-Sided Gates\u003cbr\u003e5.2.5 Multiple Gates\u003cbr\u003e\u003cbr\u003e5.3 Gate Location \u003cbr\u003e5.3.1 Side and End gates\u003cbr\u003e5.3.2 Determining Gate Position \u003cbr\u003e5.4 Gate Size \u003cbr\u003e5.5 Gate Design Systems\u003cbr\u003e5.6 Runner Design \u003cbr\u003e5.6.1 Multiple Cavity Molds\u003cbr\u003e5.6.2 Poor Ejection\u003cbr\u003e5.7 Mold Cooling Design\u003cbr\u003e5.7.1 Cooling Channels\u003cbr\u003e5.7.2 Effects of Corners\u003cbr\u003e5.7.3 Thickness Variations\u003cbr\u003e5.7.4 Runnerless Molds\u003cbr\u003e5.7.5 Slides\u003cbr\u003e5.7.6 Venting \u003cbr\u003e5.8 Mold Construction Materials\u003cbr\u003e5.9 Annealing \u003cbr\u003e5.10 Gas Assist \u003cbr\u003e5.11 Pitfalls to Avoid \u003cbr\u003e\u003cbr\u003e6. Causes of Molded Part Variation - Processing \u003cbr\u003e6.1 Molding Conditions\u003cbr\u003e6.1 (Injection melt Temperature) - if should be a separate section, renumber as 6.2 and renumber subsequent sections)\u003cbr\u003e6.2 Injection Rate\/Pressure\u003cbr\u003e6.2.1 Injection Speed\u003cbr\u003e6.2.2 Injection Pressure\u003cbr\u003e6.3 Holding Pressure\/Time\u003cbr\u003e6.3.1 Holding Pressure \u003cbr\u003e6.3.2 Holding pressure Time\u003cbr\u003e6.4 Mold Temperature\u003cbr\u003e6.4.1 Predicting mold Temperature Effects\u003cbr\u003e6.4.2 Relationship Between Mold Temperature and Wall Thickness\u003cbr\u003e6.5 Demolding Temperature\u003cbr\u003e6.6 Molded-in Stresses\u003cbr\u003e\u003cbr\u003e7. Factors Affecting Post-Mold Shrinkage\u003cbr\u003e7.1 Effects of Temperatures on Dimensions\u003cbr\u003e7.2 Effects of Moisture on Dimensions\u003cbr\u003e\u003cbr\u003e8. How to Control Mold and Post-mold Shrinkage and Warpage \u003cbr\u003e8.1 Find the Cause\u003cbr\u003e8.2 Part Geometry\u003cbr\u003e8.2.1 Overall Part Dimensions\u003cbr\u003e8.2.2 Wall Thickness\u003cbr\u003e8.2.3 Shrinkage Restricting Features\u003cbr\u003e8.3 Material Consideration\u003cbr\u003e8.3.1 Filler or Reinforcement Content\u003cbr\u003e8.3.2 Degree of Moisture Absorption\u003cbr\u003e8.4 Tooling Considerations \u003cbr\u003e8.4.1 Gate Locations\u003cbr\u003e8.4.2 Types and Sizes of Gates\u003cbr\u003e8.4.3 Runner Systems\u003cbr\u003e8.4.4 Mold Cooling Layout\u003cbr\u003e8.4.5 Tool Tolerances \u003cbr\u003e8.4.6 Draft Angles \u003cbr\u003e8.4.7 Ejection system Design\u003cbr\u003e8.4.8 Elastic Deformation of Mold\u003cbr\u003e8.4.9 Mold Wear\u003cbr\u003e8.4.10 Mold Contamination\u003cbr\u003e8.4.11 Position Deviations of Movable Mold Components\u003cbr\u003e8.4.12 Special Issues with Gears\u003cbr\u003e8.5 Processing Considerations\u003cbr\u003e8.5.1 Melt Temperatures and Uniformity \u003cbr\u003e8.5.2 Mold Temperatures and Uniformity \u003cbr\u003e8.5.3 Filling, Packing, and Holding Pressures\u003cbr\u003e8.5.4 Filling, Packing, and Holding Times\u003cbr\u003e8.5.5 Part Temperature at Ejection\u003cbr\u003e8.5.6 Clamp Tonnage\u003cbr\u003e8.5.7 Post-Mold Fixturing\/Annealing\u003cbr\u003e8.5.8 Special Problems with Thick Walls and Sink Marks\u003cbr\u003e8.5.9 Nozzles \u003cbr\u003e8.5.10 Excessive or Insufficient Shrinkage\u003cbr\u003e8.5.11 Secondary Machining\u003cbr\u003e8.5.12 Quality Control\u003cbr\u003e8.6 Controlling Warpage \u003cbr\u003e\u003cbr\u003e9. Computer Analysis\u003cbr\u003e9.1 How It Works\u003cbr\u003e9.1.1 Assumptions \u003cbr\u003e9.1.2 Generic Elements and Potential Limitations\u003cbr\u003e9.2 Does It Work \u003cbr\u003e9.2.1 Machine Settings and Controls\u003cbr\u003e9.2.2 Different Parts, Different Problems \u003cbr\u003e9.2.3 Differing Capabilities of Software\u003cbr\u003e9.3 What are Realistic Expectations of CAE?\u003cbr\u003e9.4 Resources\u003cbr\u003e9.4.1 How Much Does it Cost?\u003cbr\u003e9.4.2 Consultants \u003cbr\u003e9.5 OR Chapter 9 Appendix: Extended Illustration\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e10. Case studies\u003cbr\u003e10.1 Unexpected Housing Shrink and Combing of the Glass Fibers\u003cbr\u003e10.2 Changing Materials Triggers Warpage \u003cbr\u003e10.3 Thin-Molded Lids\u003cbr\u003e10.4 Oversize Part Injection Molding Alkyd Thermoset\u003cbr\u003e10.5 Inadequate Mold: Baby Dish\u003cbr\u003e10.6 Gas Entrapment: Baby Dish\u003cbr\u003e10.7 Sprue and Runners\u003cbr\u003e10.8 Spool Mold \u003cbr\u003e10.9 Thermoplastic Engineering Design Study \u003cbr\u003e10.10 CDs\u003cbr\u003e10.11 Flat Parts\u003cbr\u003e10.12 Electronic Connectors\u003cbr\u003eData\u003cbr\u003eGlossary\u003cbr\u003eAbbreviations \u003cbr\u003eReferences\u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJerry Fischer, CEO of Tools and Troubleshooting, Inc., brings to this handbook over 35 years experience as a mold designer and builder and consultant on mold shrinkage and warpage conditions. In the 1980s, Jerry published two books with McGraw-Hill on computer-aided design."}
Description Author: Prof. E. Abdel-Bary ISBN 978-1-85957-338-9 pages 404 Summary Plastic films are high-performance materials which play an essential part in modern life. Plastic films are mostly used in packaging applications but as will be seen from this book they are also used in the agricultural, medical and engineering fields. The plastics films industry uses state-of-the-art...
$190.00
in stock
{"id":11242219076,"title":"Handbook of Plastic Films","handle":"978-1-85957-338-9","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Prof. E. Abdel-Bary \u003cbr\u003eISBN 978-1-85957-338-9 \u003cbr\u003e\u003cbr\u003epages 404\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPlastic films are high-performance materials which play an essential part in modern life. Plastic films are mostly used in packaging applications but as will be seen from this book they are also used in the agricultural, medical and engineering fields. The plastics films industry uses state-of-the-art manufacturing processes and is continuously seeking out new technologies to improve its performance. \u003cbr\u003e\u003cbr\u003eThe understanding of the nature of plastic films, their production techniques, applications and their characterisation is essential for producing new types of plastic films. This handbook has been written to discuss the production and main uses of plastic films. \u003cbr\u003e\u003cbr\u003eChapter 1: Technology of Polyolefin Film Production, deals with the various types of polyolefins and their suitability for film manufacture. \u003cbr\u003e\u003cbr\u003eChapter 2: Processing of Polyethylene Films, the main parameters influencing resin basic properties are described. \u003cbr\u003e\u003cbr\u003eChapter 3: Processing Conditions and Durability of Polypropylene Films, details the structure, synthesis and film processing of polypropylene. \u003cbr\u003e\u003cbr\u003eChapter 4: Solubility of Additives in Polymers, deals with different aspects of additives solubility in polymers in relation to the polymer degradation and stabilisation. \u003cbr\u003e\u003cbr\u003eChapter 5: Polyvinyl Chloride: Degradation and Stabilisation, covers the stability of polyvinyl chloride (PVC) films during procesing and service. \u003cbr\u003e\u003cbr\u003eChapter 6: Ecological Issues of Polymer Flame Retardancy, discusses flame retardants, which as special additives have an important role in saving lives. These flame retardant system basically inhibit or even suppress the combustion process by chemical or physical action in the gas or condensed phase.\u003cbr\u003e\u003cbr\u003eChapter 7: Interaction of Polymers with Nitrogen Oxides in Polluted Atmospheres, covers thermal and photochemical oxidation of polymers under the influence of the aggressive, polluting atmospheric gases.\u003cbr\u003e\u003cbr\u003eChapter 8: Modifications of Plastic Films, discusses the modifications of plastic films required to improve their mechanical or physical properties to meet the requirements of certain applications. \u003cbr\u003e\u003cbr\u003eChapter 9: Applications of Plastic Films in Packaging, deals with applications of plastic films in packaging. \u003cbr\u003e\u003cbr\u003eChapter 10: Applications of Plastic Films in Agriculture, deals with the application of plastic films in agriculture. \u003cbr\u003e\u003cbr\u003eChapter 11: Physicochemical Criteria for Estimating the Efficiency of Burn Dressings, deals with the principal medical treatment of burns using dressings made with a polymeric layer or layers. \u003cbr\u003e\u003cbr\u003eChapter 12: Testing of Plastic Films, covers the most common test methods generally used for plastic films. The requirements necessary for the test methods are summarised. \u003cbr\u003e\u003cbr\u003eChapter 13: Recycling of Plastic Waste, covers the problem of plastic films recycling Different types of recycling are discussed and recycling of some selected types of films are discussed. This book will be invaluable to anyone who is already working with plastic films or to anyone who is considering working with them in the future.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Technology of Polyolefin Film Production\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Structures of the Polyolefins\u003cbr\u003e1.2.1 Low-Density Polyethylene (LDPE\u003cbr\u003e1.2.2 High-Density Polyethylene (HDPE,MDPE,UHMWPE\u003cbr\u003e1.2.3 Linear Low-Density Polyethylene (LLDPE\u003cbr\u003e1.2.4 Very-and Ultra-Low-Density Polyethylene (VLDPE,ULDPE\u003cbr\u003e1.2.5 Polypropylene (PP\u003cbr\u003e1.2.6 Polypropylene Copolymers\u003cbr\u003e1.3 Morphology of Polyolefin Films\u003cbr\u003e1.4 Rheological Characterisation of the Polyolefins\u003cbr\u003e1.4.1 High-Density Polyethylene\u003cbr\u003e1.4.2 Linear Low-Density Polyethylene\u003cbr\u003e1.4.3 Very-and Ultra-Low-Density Polyethylene\u003cbr\u003e1.4.4 Low-Density Polyethylene,Long Branches\u003cbr\u003e1.4.5 Polypropylene\u003cbr\u003e1.5 Blown Film Production (Tubular Extrusion\u003cbr\u003e1.5.1 Extruder Characteristics\u003cbr\u003e1.5.2 Screw Design\u003cbr\u003e1.5.3 Frost-line and Blow Ratio\u003cbr\u003e1.6 Cast Film Production\u003cbr\u003e1.6.1 Extrusion Conditions\u003cbr\u003e1.6.2 Calendering Finishing\u003cbr\u003e1.6.3 Extrusion Coating\u003cbr\u003e1.7 Orientation of the Film\u003cbr\u003e1.7.1 Orientation During Blowing\u003cbr\u003e1.7.2 Orientation by Drawing\u003cbr\u003e1.7.3 Biaxial Orientation (Biaxially Oriented PP,BOPP)\u003cbr\u003e1.8 Surface Properties\u003cbr\u003e1.8.1 Gloss\u003cbr\u003e1.8.2 Haze\u003cbr\u003e1.8.3 Surface Energy\u003cbr\u003e1.8.4 Slip\u003cbr\u003e1.8.5 Blocking\u003cbr\u003e1.9 Surface Modification\u003cbr\u003e1.9.1 Corona Discharge\u003cbr\u003e1.9.2 Antiblocking\u003cbr\u003e1.9.3 Slip Additives\u003cbr\u003e1.9.4 Lubricants\u003cbr\u003e1.9.5 Antistatic Agents\u003cbr\u003e1.10 Internal Additives\u003cbr\u003e1.10.1 Antioxidants\u003cbr\u003e1.10.2 Ultraviolet Absorbers\u003cbr\u003e1.11 Mechanical Properties\u003cbr\u003e1.11.1 Tensile Properties\u003cbr\u003e1.11.2 Impact Properties\u003cbr\u003e1.11.3 Dynamic Mechanical Properties\u003cbr\u003e1.11.4 Dielectric Properties\u003cbr\u003e1.12 Microscopic Examination\u003cbr\u003e1.12.1 Optical – Polarised Light Effect with Strain\u003cbr\u003e1.12.2 Scanning Electron Microscopy (SEM)– Etching\u003cbr\u003e1.12.3 Atomic Force Microscopy (AFM)\u003cbr\u003e1.13 Thermal Analysis\u003cbr\u003e1.13.1 Differential Scanning Calorimetry (DSC)\u003cbr\u003e1.13.2 Temperature-Modulated DSC (TMDSC)\u003cbr\u003e1.14 Infrared Spectroscopy\u003cbr\u003e1.14.1 Characterisation\u003cbr\u003e1.14.2 Composition Analysis of Blends and Laminates\u003cbr\u003e1.14.3 Surface Analysis\u003cbr\u003e1.14.4 Other Properties\u003cbr\u003e1.15 Applications\u003cbr\u003e1.15.1 Packaging\u003cbr\u003e1.15.2 Laminated Films\u003cbr\u003e1.15.3 Coextruded Films\u003cbr\u003e1.15.4 Heat Sealing\u003cbr\u003e1.15.5 Agriculture\u003cbr\u003e1.16 Conclusion \u003cbr\u003e\u003cbr\u003e2. Processing of Polyethylene Films\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Parameters Influencing Resin Basic Properties\u003cbr\u003e2.2.1 Molecular Weight (Molar Mass)and Dispersity Index\u003cbr\u003e2.2.2 Melt Index (Flow Properties\u003cbr\u003e2.2.3 Density\u003cbr\u003e2.2.4 Chain Branching\u003cbr\u003e2.2.5 Intrinsic Viscosity\u003cbr\u003e2.2.6 Melting Point and Heat of Fusion\u003cbr\u003e2.2.7 Melt Properties – Rheology\u003cbr\u003e2.2.8 Elongational Viscosity\u003cbr\u003e2.2.9 Elasticity\u003cbr\u003e2.3 Blown Film Extrusion (Tubular Film\u003cbr\u003e2.3.1 Introduction\u003cbr\u003e2.3.2 Description of the Blown Film Process\u003cbr\u003e2.3.3 Various Ways of Cooling the Film\u003cbr\u003e2.3.4 Extruder Size\u003cbr\u003e2.3.5 Horsepower\u003cbr\u003e2.3.6 Selection of Extrusion Equipment\u003cbr\u003e2.4 Cast Film Extrusion\u003cbr\u003e2.4.1 Description of the Cast Film Process\u003cbr\u003e2.4.2 Effects of Extrusion Variables on Film Characteristics\u003cbr\u003e2.4.3 Effect of Blow-up Ratio on Film Properties\u003cbr\u003e2.5 Processing Troubleshooting Guidelines\u003cbr\u003e2.6 Shrink Film\u003cbr\u003e2.6.1 Shrink Film Types\u003cbr\u003e2.6.2 Shrink Film Properties\u003cbr\u003e2.6.3 The Manufacture of Shrink Film\u003cbr\u003e2.6.4 Shrink Tunnels and Ovens \u003cbr\u003e\u003cbr\u003e3. Processing Conditions and Durability of Polypropylene Films\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Structures and Synthesis\u003cbr\u003e3.3 Film Processing\u003cbr\u003e3.4 Additives\u003cbr\u003e3.5 Ultraviolet Degradation of Polypropylene\u003cbr\u003e3.5.1 UV Degradation Mechanisms\u003cbr\u003e3.5.2 Effect of UV Degradation on Molecular Structure and Properties of PP\u003cbr\u003e3.5.3 Stabilisation of PP by Additives\u003cbr\u003e3.6 Case Studies\u003cbr\u003e3.6.1 Materials and Experimental Procedures\u003cbr\u003e3.6.2 Durability-Microstructure Relationship\u003cbr\u003e3.6.3 Durability-Processing Condition Relationship\u003cbr\u003e3.6.4 Durability-Additive Property Relationship\u003cbr\u003e3.7 Concluding Remarks \u003cbr\u003e\u003cbr\u003e4. Solubility of Additives in Polymers\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Nonuniform Polymer Structure\u003cbr\u003e4.3 Additive Sorption\u003cbr\u003e4.4 Quantitative Data on Additive Solubility in Polymers\u003cbr\u003e4.5 Factors Affecting Additive Solubility\u003cbr\u003e4.5.1 Crystallinity and Supermolecular Structure\u003cbr\u003e4.5.2 Effect of Polymer Orientation\u003cbr\u003e4.5.3 Role of Polymer Polar Groups\u003cbr\u003e4.5.4 Effect of the Second Compound\u003cbr\u003e4.5.5 Features of Dissolution of High Molecular Weight Additives\u003cbr\u003e4.5.6 Effect of Polymer Oxidation\u003cbr\u003e4.6 Solubility of Additives and Their Loss \u003cbr\u003e\u003cbr\u003e5. Polyvinyl Chloride:Degradation and Stabilisation\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Some Factors Affecting the Low Stability of PVC\u003cbr\u003e5.3 Identification of Carbonylallyl Groups\u003cbr\u003e5.4 Principal Ways to Stabilise PVC\u003cbr\u003e5.5 Light Stabilisation of PVC\u003cbr\u003e5.6 Effect of Plasticisers on PVC Degradation in Solution\u003cbr\u003e5.7 ‘Echo ’ Stabilisation of PVC\u003cbr\u003e5.8 Tasks for the Future \u003cbr\u003e\u003cbr\u003e6. Ecological Issues of Polymer Flame Retardants\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Mechanisms of Action\u003cbr\u003e6.3 Halogenated Diphenyl Ethers – Dioxins\u003cbr\u003e6.4 Flame Retardant Systems\u003cbr\u003e6.5 Intumescent Additives\u003cbr\u003e6.6 Polymer Organic Char-Former\u003cbr\u003e6.7 Polymer Nanocomposites \u003cbr\u003e\u003cbr\u003e7. Interaction of Polymers with the Nitrogen Oxides in Polluted Atmospheres\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Interaction of Nitrogen Dioxide with Polymers\u003cbr\u003e7.2.1 Vinyl Polymers:PE,PP,PS,PMMA,PAN,PVC and PVF\u003cbr\u003e7.2.2 Non-Saturated Polymers\u003cbr\u003e7.2.3 Polyamides,Polyurethanes,Polyamidoimides\u003cbr\u003e7.3 Reaction of Nitric Oxide with Polymers\u003cbr\u003e7.4 Conclusion \u003cbr\u003e\u003cbr\u003e8. Modifications of Plastic Films\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Modification of Mechanical Properties\u003cbr\u003e8.2.1 Orientation\u003cbr\u003e8.2.2 Crystallisation\u003cbr\u003e8.2.3 Crosslinking\u003cbr\u003e8.3 Chemical Modifications\u003cbr\u003e8.3.1 Fluorination\u003cbr\u003e8.3.2 Chlorination\u003cbr\u003e8.3.3 Bromination\u003cbr\u003e8.3.4 Sulfonation\u003cbr\u003e8.3.5 Chemical Etching\u003cbr\u003e8.3.6 Grafting\u003cbr\u003e8.4 Physical Methods Used for Surface Modification\u003cbr\u003e8.4.1 Plasma Treatment\u003cbr\u003e8.4.2 Corona Treatment\u003cbr\u003e8.5 Characterisation\u003cbr\u003e8.5.1 Gravimetric Method\u003cbr\u003e8.5.2 Thermal Analyses\u003cbr\u003e8.5.3 Scanning Electron Microscopy\u003cbr\u003e8.5.4 Swelling Measurements\u003cbr\u003e8.5.5 Molecular Weight and Molecular Weight Distribution\u003cbr\u003e8.5.6 Dielectric Relaxation\u003cbr\u003e8.5.7 Surface Properties\u003cbr\u003e8.5.8 Spectroscopic Analysis\u003cbr\u003e8.5.9 Electron Spectroscopy for Chemical Analysis (ESCA) or X-Ray Photoelectron Spectroscopy (XPS)\u003cbr\u003e8.6 Applications \u003cbr\u003e\u003cbr\u003e9.Applications of Plastic Films in Packaging\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Packaging Functions\u003cbr\u003e9.3 Flexible Package Forms\u003cbr\u003e9.3.1 Wraps\u003cbr\u003e9.3.2 Bags,Sacks and Pouches\u003cbr\u003e9.3.3 Pouch Production\u003cbr\u003e9.3.4 Dispensing and Reclosure Features\u003cbr\u003e9.4 Heat-Sealing\u003cbr\u003e9.5 Other Uses of Packaging Films\u003cbr\u003e9.6 Major Packaging Films\u003cbr\u003e9.6.1 Low-Density Polyethylene (LDPE)and Linear Low-Density Polyethylene (LLDPE)\u003cbr\u003e9.6.2 High-Density Polyethylene (HDPE)\u003cbr\u003e9.6.3 Polypropylene (PP)\u003cbr\u003e9.6.4 Polyvinyl Chloride (PVC)\u003cbr\u003e9.6.5 Polyethylene Terephthalate (PET)\u003cbr\u003e9.6.6 Polyvinylidene Chloride (PVDC)\u003cbr\u003e9.6.7 Polychlorotrifluoroethylene (PCTFE)\u003cbr\u003e9.6.8 Polyvinyl Alcohol (PVOH)\u003cbr\u003e9.6.9 Ethylene-Vinyl Alcohol (EVOH)\u003cbr\u003e9.6.10 Polyamide (Nylon)\u003cbr\u003e9.6.11 Ethylene-Vinyl Acetate (EVA)and Acid Copolymer Films\u003cbr\u003e9.6.12 Ionomers\u003cbr\u003e9.6.13 Other Plastics\u003cbr\u003e9.7 Multilayer Plastic Films\u003cbr\u003e9.7.1 Coating\u003cbr\u003e9.7.2 Lamination\u003cbr\u003e9.7.3 Coextrusion\u003cbr\u003e9.7.4 Metallisation\u003cbr\u003e9.7.5 Silicon Oxide Coating\u003cbr\u003e9.7.6 Other Inorganic Barrier Coatings\u003cbr\u003e9.8 Surface Treatment\u003cbr\u003e9.9 Static Discharge\u003cbr\u003e9.10 Printing\u003cbr\u003e9.11 Barriers and Permeation\u003cbr\u003e9.12 Environmental Issues \u003cbr\u003e\u003cbr\u003e10. Applications of Plastic Films in Agriculture\u003cbr\u003e10.1 Introduction\u003cbr\u003e10.2 Production of Plastic Films\u003cbr\u003e10.3 Characteristics of Plastic Films Used in Agriculture\u003cbr\u003e10.4 Stability of Greenhouse Films to Solar Irradiation\u003cbr\u003e10.4.1 Ultraviolet Stabilisers\u003cbr\u003e10.4.2 Requirements for Stabiliser Efficiency\u003cbr\u003e10.4.3 Evaluation of Laboratory and Outdoor Photooxidation\u003cbr\u003e10.5 Other Factors Affecting the Stability of Greenhouse Films\u003cbr\u003e10.5.1 Temperature\u003cbr\u003e10.5.2 Humidity\u003cbr\u003e10.5.3 Wind\u003cbr\u003e10.5.4 Fog Formation\u003cbr\u003e10.5.5 Environmental Pollution\u003cbr\u003e10.5.6 Effects of Pesticides\u003cbr\u003e10.6 Ageing Resistance of Greenhouse Films\u003cbr\u003e10.6.1 Measurement of Ageing Factors\u003cbr\u003e10.6.2 Changes in Chemical Structure\u003cbr\u003e10.7 Recycling of Plastic Films in Agriculture\u003cbr\u003e10.7.1 Introduction\u003cbr\u003e10.7.2 Contamination by the Environment \u003cbr\u003e\u003cbr\u003e11. Physicochemical Criteria for Estimating the Efficiency of Burn Dressings\u003cbr\u003e11.1 Introduction\u003cbr\u003e11.2 Modern Surgical Burn Dressings\u003cbr\u003e11.2.1 Dressings Based on Materials of Animal Origin\u003cbr\u003e11.2.2 Dressings Based on Synthetic Materials\u003cbr\u003e11.2.3 Dressings Based on Materials of Vegetable Origin\u003cbr\u003e11.3 Selection of the Properties of Tested Burn Dressings\u003cbr\u003e11.3.1 Sorption-Diffusion Properties\u003cbr\u003e11.3.2 Adhesive Properties\u003cbr\u003e11.3.3 Mechanical Properties\u003cbr\u003e11.4 Methods of Investigation of Physicochemical Properties of Burn Dressings\u003cbr\u003e11.4.1 Determination of Material Porosity\u003cbr\u003e11.4.2 Determination of Size and Number of Pores\u003cbr\u003e11.4.3 Estimation of Surface Energy at Material-Medium Interface\u003cbr\u003e11.4.4 Determination of Sorptional Ability of Materials\u003cbr\u003e11.4.5 Determination of Air Penetrability of Burn Dressings\u003cbr\u003e11.4.6 Determination of Adhesion of Burn Dressings\u003cbr\u003e11.4.7 Determination of Vapour Penetrability of Burn Dressings\u003cbr\u003e11.5 Results and Discussion\u003cbr\u003e11.5.1 Determination of Sorption Ability of Burn Dressings\u003cbr\u003e11.5.2 Kinetics of the Sorption of Liquid Media by Burn Dressings\u003cbr\u003e11.5.3 Determination of Vapour Penetrability of Burn Dressings\u003cbr\u003e11.5.4 Determination of the Air Penetrability of Burn Dressings\u003cbr\u003e11.5.5 Determination of Adhesion of Burn Dressings\u003cbr\u003e11.6 The Model of Action of a Burn Dressing\u003cbr\u003e11.6.1 Evaporation of Water from the Dressing Surface\u003cbr\u003e11.6.2 Sorption of Fluid by Burn Dressing from Bulk Containing a Definite Amount of Fluid\u003cbr\u003e11.6.3 Mass Transfer of Water from Wound to Surroundings\u003cbr\u003e11.7 Criteria for the Efficiency of First-Aid Burn Dressings\u003cbr\u003e11.7.1 Requirements of a First-Aid Burn Dressing\u003cbr\u003e11.7.2 Characteristics of First-Aid Burn Dressings\u003cbr\u003e11.8 Conclusion P\u003cbr\u003e\u003cbr\u003e12. Testing of Plastic Films\u003cbr\u003e12.1 Introduction\u003cbr\u003e12.2 Requirements for Test Methods\u003cbr\u003e12.2.1 List of Requirements\u003cbr\u003e12.2.2 Interpretation of Test Results\u003cbr\u003e12.3 Some Properties of Plastic Films\u003cbr\u003e12.3.1 Dimensions\u003cbr\u003e12.3.2 Conditioning the Samples\u003cbr\u003e12.4 Mechanical Tests\u003cbr\u003e12.4.1 Tensile Testing (Static)\u003cbr\u003e12.4.2 Impact Resistance\u003cbr\u003e12.4.3 Tear Resistance\u003cbr\u003e12.4.4 Bending Stiffness (Flexural Modulus\u003cbr\u003e12.4.5 Dynamic Mechanical Properties\u003cbr\u003e12.5.2 Indices of Refraction and Yellowness\u003cbr\u003e12.5 Some Physical,Chemical and Physicochemical Tests\u003cbr\u003e12.5.1 Density of Plastics\u003cbr\u003e12.5.3 Transparency\u003cbr\u003e12.5.4 Resistance to Chemicals\u003cbr\u003e12.5.5 Haze and Luminous Transmittance\u003cbr\u003e12.5.6 Ignition,Rate of Burning Characteristics and Oxygen Index (OI)\u003cbr\u003e12.5.7 Static and Kinetic Coefficients of Friction\u003cbr\u003e12.5.8 Specular Gloss of Plastic Films and Solid Plastics\u003cbr\u003e12.5.9 Wetting Tension of PE and PP Films\u003cbr\u003e12.5.10 Unrestrained Linear Thermal Shrinkage of Plastic Films\u003cbr\u003e12.5.11 Shrink Tension and Orientation Release Stress\u003cbr\u003e12.5.12 Rigidity\u003cbr\u003e12.5.13 Blocking Load by Parallel-Plate Method\u003cbr\u003e12.5.14 Determination of LLDPE Composition by 13C NMR\u003cbr\u003e12.5.15 Creep and Creep Rupture\u003cbr\u003e12.5.16 Outdoor Weathering\/Weatherability\u003cbr\u003e12.5.17 Abrasion Resistance\u003cbr\u003e12.5.18 Mar Resistance\u003cbr\u003e12.5.19 Environmental Stress Cracking\u003cbr\u003e12.5.20 Water Vapour Permeability\u003cbr\u003e12.5.21 Oxygen Gas Transmission\u003cbr\u003e12.6 Standard Specifications for Some Plastic Films\u003cbr\u003e12.6.1 Standard Specification for PET Films\u003cbr\u003e12.6.2 Standard Specification for LDPE Films (for General Use and Packaging Applications)\u003cbr\u003e12.6.3 Standard Specification for MDPE and General Grade PE Films (for General Use and Packaging Applications)\u003cbr\u003e12.6.4 Standard Specification for OPP Films\u003cbr\u003e12.6.5 Standard Specification for Crosslinkable Ethylene Plastics \u003cbr\u003e\u003cbr\u003e13. Recycling of Plastic Waste\u003cbr\u003e13.1 Introduction\u003cbr\u003e13.2 Main Approaches to Plastic Recycling\u003cbr\u003e13.2.1 Primary Recycling\u003cbr\u003e13.2.2 Secondary Recycling\u003cbr\u003e13.2.3 Tertiary Recycling\u003cbr\u003e13.2.4 Quaternary Recycling\u003cbr\u003e13.2.5 Conclusion\u003cbr\u003e13.3 Collection and Sorting\u003cbr\u003e13.3.1 Resin Identification\u003cbr\u003e13.3.2 General Aspects of Resin Separation\u003cbr\u003e13.3.3 Resin Separation Based on Density\u003cbr\u003e13.3.4 Resin Separation Based on Colour\u003cbr\u003e13.3.5 Resin Separation Based on Physicochemical Properties\u003cbr\u003e13.4 Recycling of Separated PET Waste\u003cbr\u003e13.5 Recycling of Separated PVC Waste\u003cbr\u003e13.5.1 Chemical Recycling of Mixed Plastic Waste\u003cbr\u003e13.5.2 Chemical Recycling of PVC-Rich Waste\u003cbr\u003e13.6 Recycling of Separated PE Waste\u003cbr\u003e13.6.1 Contamination of PE Waste by Additives\u003cbr\u003e13.6.2 Contamination of PE Waste by Reprocessing\u003cbr\u003e13.7 Recycling of HDPE\u003cbr\u003e13.7.1 Applications for Recycled HDPE\u003cbr\u003e13.7.2 Rubber-Modified Products\u003cbr\u003e13.8 Recycling Using Radiation Technology\u003cbr\u003e13.9 Biodegradable Polymers\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nElsayed Abdel-Bary took his first degree at Cairo University and studied for his PhD at the Institute of Fine Chemical Technology in Moscow. He became a Professor in the Faculty of Science at Mansoura University in 1979 and subsequently founded the University’s Polymer Research Centre. He has published widely on the subject of polymer science, to date he has over 100 papers\/book chapters credited to him. Elsayed is the Editor-in-Chief of Packplast International and Interplas International, the Vice-President of the Egyptian Chemical Society and a member of the IUPAC Academy of Scientific Research and Technology.","published_at":"2017-06-22T21:13:38-04:00","created_at":"2017-06-22T21:13:38-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2003","additives","agriculture","antiblocking","antistatics","book","degradation","dressings medical","extrusion","films","flame retardant","HDPE","infrared spectroscopy ","injection moulding","LDPE","lubricants","MDPE","p-applications","packaging","plastic","polyethylene","polypropylene","polyvinyl chloride","PP","properties","PVC","recycling","slip agents","testing","thermal analysis","UHMWPE"," stabilisation"],"price":19000,"price_min":19000,"price_max":19000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378369540,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Plastic Films","public_title":null,"options":["Default Title"],"price":19000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-338-9","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-338-9.jpg?v=1499724562"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-338-9.jpg?v=1499724562","options":["Title"],"media":[{"alt":null,"id":355731701853,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-338-9.jpg?v=1499724562"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-338-9.jpg?v=1499724562","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Prof. E. Abdel-Bary \u003cbr\u003eISBN 978-1-85957-338-9 \u003cbr\u003e\u003cbr\u003epages 404\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPlastic films are high-performance materials which play an essential part in modern life. Plastic films are mostly used in packaging applications but as will be seen from this book they are also used in the agricultural, medical and engineering fields. The plastics films industry uses state-of-the-art manufacturing processes and is continuously seeking out new technologies to improve its performance. \u003cbr\u003e\u003cbr\u003eThe understanding of the nature of plastic films, their production techniques, applications and their characterisation is essential for producing new types of plastic films. This handbook has been written to discuss the production and main uses of plastic films. \u003cbr\u003e\u003cbr\u003eChapter 1: Technology of Polyolefin Film Production, deals with the various types of polyolefins and their suitability for film manufacture. \u003cbr\u003e\u003cbr\u003eChapter 2: Processing of Polyethylene Films, the main parameters influencing resin basic properties are described. \u003cbr\u003e\u003cbr\u003eChapter 3: Processing Conditions and Durability of Polypropylene Films, details the structure, synthesis and film processing of polypropylene. \u003cbr\u003e\u003cbr\u003eChapter 4: Solubility of Additives in Polymers, deals with different aspects of additives solubility in polymers in relation to the polymer degradation and stabilisation. \u003cbr\u003e\u003cbr\u003eChapter 5: Polyvinyl Chloride: Degradation and Stabilisation, covers the stability of polyvinyl chloride (PVC) films during procesing and service. \u003cbr\u003e\u003cbr\u003eChapter 6: Ecological Issues of Polymer Flame Retardancy, discusses flame retardants, which as special additives have an important role in saving lives. These flame retardant system basically inhibit or even suppress the combustion process by chemical or physical action in the gas or condensed phase.\u003cbr\u003e\u003cbr\u003eChapter 7: Interaction of Polymers with Nitrogen Oxides in Polluted Atmospheres, covers thermal and photochemical oxidation of polymers under the influence of the aggressive, polluting atmospheric gases.\u003cbr\u003e\u003cbr\u003eChapter 8: Modifications of Plastic Films, discusses the modifications of plastic films required to improve their mechanical or physical properties to meet the requirements of certain applications. \u003cbr\u003e\u003cbr\u003eChapter 9: Applications of Plastic Films in Packaging, deals with applications of plastic films in packaging. \u003cbr\u003e\u003cbr\u003eChapter 10: Applications of Plastic Films in Agriculture, deals with the application of plastic films in agriculture. \u003cbr\u003e\u003cbr\u003eChapter 11: Physicochemical Criteria for Estimating the Efficiency of Burn Dressings, deals with the principal medical treatment of burns using dressings made with a polymeric layer or layers. \u003cbr\u003e\u003cbr\u003eChapter 12: Testing of Plastic Films, covers the most common test methods generally used for plastic films. The requirements necessary for the test methods are summarised. \u003cbr\u003e\u003cbr\u003eChapter 13: Recycling of Plastic Waste, covers the problem of plastic films recycling Different types of recycling are discussed and recycling of some selected types of films are discussed. This book will be invaluable to anyone who is already working with plastic films or to anyone who is considering working with them in the future.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Technology of Polyolefin Film Production\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Structures of the Polyolefins\u003cbr\u003e1.2.1 Low-Density Polyethylene (LDPE\u003cbr\u003e1.2.2 High-Density Polyethylene (HDPE,MDPE,UHMWPE\u003cbr\u003e1.2.3 Linear Low-Density Polyethylene (LLDPE\u003cbr\u003e1.2.4 Very-and Ultra-Low-Density Polyethylene (VLDPE,ULDPE\u003cbr\u003e1.2.5 Polypropylene (PP\u003cbr\u003e1.2.6 Polypropylene Copolymers\u003cbr\u003e1.3 Morphology of Polyolefin Films\u003cbr\u003e1.4 Rheological Characterisation of the Polyolefins\u003cbr\u003e1.4.1 High-Density Polyethylene\u003cbr\u003e1.4.2 Linear Low-Density Polyethylene\u003cbr\u003e1.4.3 Very-and Ultra-Low-Density Polyethylene\u003cbr\u003e1.4.4 Low-Density Polyethylene,Long Branches\u003cbr\u003e1.4.5 Polypropylene\u003cbr\u003e1.5 Blown Film Production (Tubular Extrusion\u003cbr\u003e1.5.1 Extruder Characteristics\u003cbr\u003e1.5.2 Screw Design\u003cbr\u003e1.5.3 Frost-line and Blow Ratio\u003cbr\u003e1.6 Cast Film Production\u003cbr\u003e1.6.1 Extrusion Conditions\u003cbr\u003e1.6.2 Calendering Finishing\u003cbr\u003e1.6.3 Extrusion Coating\u003cbr\u003e1.7 Orientation of the Film\u003cbr\u003e1.7.1 Orientation During Blowing\u003cbr\u003e1.7.2 Orientation by Drawing\u003cbr\u003e1.7.3 Biaxial Orientation (Biaxially Oriented PP,BOPP)\u003cbr\u003e1.8 Surface Properties\u003cbr\u003e1.8.1 Gloss\u003cbr\u003e1.8.2 Haze\u003cbr\u003e1.8.3 Surface Energy\u003cbr\u003e1.8.4 Slip\u003cbr\u003e1.8.5 Blocking\u003cbr\u003e1.9 Surface Modification\u003cbr\u003e1.9.1 Corona Discharge\u003cbr\u003e1.9.2 Antiblocking\u003cbr\u003e1.9.3 Slip Additives\u003cbr\u003e1.9.4 Lubricants\u003cbr\u003e1.9.5 Antistatic Agents\u003cbr\u003e1.10 Internal Additives\u003cbr\u003e1.10.1 Antioxidants\u003cbr\u003e1.10.2 Ultraviolet Absorbers\u003cbr\u003e1.11 Mechanical Properties\u003cbr\u003e1.11.1 Tensile Properties\u003cbr\u003e1.11.2 Impact Properties\u003cbr\u003e1.11.3 Dynamic Mechanical Properties\u003cbr\u003e1.11.4 Dielectric Properties\u003cbr\u003e1.12 Microscopic Examination\u003cbr\u003e1.12.1 Optical – Polarised Light Effect with Strain\u003cbr\u003e1.12.2 Scanning Electron Microscopy (SEM)– Etching\u003cbr\u003e1.12.3 Atomic Force Microscopy (AFM)\u003cbr\u003e1.13 Thermal Analysis\u003cbr\u003e1.13.1 Differential Scanning Calorimetry (DSC)\u003cbr\u003e1.13.2 Temperature-Modulated DSC (TMDSC)\u003cbr\u003e1.14 Infrared Spectroscopy\u003cbr\u003e1.14.1 Characterisation\u003cbr\u003e1.14.2 Composition Analysis of Blends and Laminates\u003cbr\u003e1.14.3 Surface Analysis\u003cbr\u003e1.14.4 Other Properties\u003cbr\u003e1.15 Applications\u003cbr\u003e1.15.1 Packaging\u003cbr\u003e1.15.2 Laminated Films\u003cbr\u003e1.15.3 Coextruded Films\u003cbr\u003e1.15.4 Heat Sealing\u003cbr\u003e1.15.5 Agriculture\u003cbr\u003e1.16 Conclusion \u003cbr\u003e\u003cbr\u003e2. Processing of Polyethylene Films\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Parameters Influencing Resin Basic Properties\u003cbr\u003e2.2.1 Molecular Weight (Molar Mass)and Dispersity Index\u003cbr\u003e2.2.2 Melt Index (Flow Properties\u003cbr\u003e2.2.3 Density\u003cbr\u003e2.2.4 Chain Branching\u003cbr\u003e2.2.5 Intrinsic Viscosity\u003cbr\u003e2.2.6 Melting Point and Heat of Fusion\u003cbr\u003e2.2.7 Melt Properties – Rheology\u003cbr\u003e2.2.8 Elongational Viscosity\u003cbr\u003e2.2.9 Elasticity\u003cbr\u003e2.3 Blown Film Extrusion (Tubular Film\u003cbr\u003e2.3.1 Introduction\u003cbr\u003e2.3.2 Description of the Blown Film Process\u003cbr\u003e2.3.3 Various Ways of Cooling the Film\u003cbr\u003e2.3.4 Extruder Size\u003cbr\u003e2.3.5 Horsepower\u003cbr\u003e2.3.6 Selection of Extrusion Equipment\u003cbr\u003e2.4 Cast Film Extrusion\u003cbr\u003e2.4.1 Description of the Cast Film Process\u003cbr\u003e2.4.2 Effects of Extrusion Variables on Film Characteristics\u003cbr\u003e2.4.3 Effect of Blow-up Ratio on Film Properties\u003cbr\u003e2.5 Processing Troubleshooting Guidelines\u003cbr\u003e2.6 Shrink Film\u003cbr\u003e2.6.1 Shrink Film Types\u003cbr\u003e2.6.2 Shrink Film Properties\u003cbr\u003e2.6.3 The Manufacture of Shrink Film\u003cbr\u003e2.6.4 Shrink Tunnels and Ovens \u003cbr\u003e\u003cbr\u003e3. Processing Conditions and Durability of Polypropylene Films\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Structures and Synthesis\u003cbr\u003e3.3 Film Processing\u003cbr\u003e3.4 Additives\u003cbr\u003e3.5 Ultraviolet Degradation of Polypropylene\u003cbr\u003e3.5.1 UV Degradation Mechanisms\u003cbr\u003e3.5.2 Effect of UV Degradation on Molecular Structure and Properties of PP\u003cbr\u003e3.5.3 Stabilisation of PP by Additives\u003cbr\u003e3.6 Case Studies\u003cbr\u003e3.6.1 Materials and Experimental Procedures\u003cbr\u003e3.6.2 Durability-Microstructure Relationship\u003cbr\u003e3.6.3 Durability-Processing Condition Relationship\u003cbr\u003e3.6.4 Durability-Additive Property Relationship\u003cbr\u003e3.7 Concluding Remarks \u003cbr\u003e\u003cbr\u003e4. Solubility of Additives in Polymers\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Nonuniform Polymer Structure\u003cbr\u003e4.3 Additive Sorption\u003cbr\u003e4.4 Quantitative Data on Additive Solubility in Polymers\u003cbr\u003e4.5 Factors Affecting Additive Solubility\u003cbr\u003e4.5.1 Crystallinity and Supermolecular Structure\u003cbr\u003e4.5.2 Effect of Polymer Orientation\u003cbr\u003e4.5.3 Role of Polymer Polar Groups\u003cbr\u003e4.5.4 Effect of the Second Compound\u003cbr\u003e4.5.5 Features of Dissolution of High Molecular Weight Additives\u003cbr\u003e4.5.6 Effect of Polymer Oxidation\u003cbr\u003e4.6 Solubility of Additives and Their Loss \u003cbr\u003e\u003cbr\u003e5. Polyvinyl Chloride:Degradation and Stabilisation\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Some Factors Affecting the Low Stability of PVC\u003cbr\u003e5.3 Identification of Carbonylallyl Groups\u003cbr\u003e5.4 Principal Ways to Stabilise PVC\u003cbr\u003e5.5 Light Stabilisation of PVC\u003cbr\u003e5.6 Effect of Plasticisers on PVC Degradation in Solution\u003cbr\u003e5.7 ‘Echo ’ Stabilisation of PVC\u003cbr\u003e5.8 Tasks for the Future \u003cbr\u003e\u003cbr\u003e6. Ecological Issues of Polymer Flame Retardants\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Mechanisms of Action\u003cbr\u003e6.3 Halogenated Diphenyl Ethers – Dioxins\u003cbr\u003e6.4 Flame Retardant Systems\u003cbr\u003e6.5 Intumescent Additives\u003cbr\u003e6.6 Polymer Organic Char-Former\u003cbr\u003e6.7 Polymer Nanocomposites \u003cbr\u003e\u003cbr\u003e7. Interaction of Polymers with the Nitrogen Oxides in Polluted Atmospheres\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Interaction of Nitrogen Dioxide with Polymers\u003cbr\u003e7.2.1 Vinyl Polymers:PE,PP,PS,PMMA,PAN,PVC and PVF\u003cbr\u003e7.2.2 Non-Saturated Polymers\u003cbr\u003e7.2.3 Polyamides,Polyurethanes,Polyamidoimides\u003cbr\u003e7.3 Reaction of Nitric Oxide with Polymers\u003cbr\u003e7.4 Conclusion \u003cbr\u003e\u003cbr\u003e8. Modifications of Plastic Films\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Modification of Mechanical Properties\u003cbr\u003e8.2.1 Orientation\u003cbr\u003e8.2.2 Crystallisation\u003cbr\u003e8.2.3 Crosslinking\u003cbr\u003e8.3 Chemical Modifications\u003cbr\u003e8.3.1 Fluorination\u003cbr\u003e8.3.2 Chlorination\u003cbr\u003e8.3.3 Bromination\u003cbr\u003e8.3.4 Sulfonation\u003cbr\u003e8.3.5 Chemical Etching\u003cbr\u003e8.3.6 Grafting\u003cbr\u003e8.4 Physical Methods Used for Surface Modification\u003cbr\u003e8.4.1 Plasma Treatment\u003cbr\u003e8.4.2 Corona Treatment\u003cbr\u003e8.5 Characterisation\u003cbr\u003e8.5.1 Gravimetric Method\u003cbr\u003e8.5.2 Thermal Analyses\u003cbr\u003e8.5.3 Scanning Electron Microscopy\u003cbr\u003e8.5.4 Swelling Measurements\u003cbr\u003e8.5.5 Molecular Weight and Molecular Weight Distribution\u003cbr\u003e8.5.6 Dielectric Relaxation\u003cbr\u003e8.5.7 Surface Properties\u003cbr\u003e8.5.8 Spectroscopic Analysis\u003cbr\u003e8.5.9 Electron Spectroscopy for Chemical Analysis (ESCA) or X-Ray Photoelectron Spectroscopy (XPS)\u003cbr\u003e8.6 Applications \u003cbr\u003e\u003cbr\u003e9.Applications of Plastic Films in Packaging\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Packaging Functions\u003cbr\u003e9.3 Flexible Package Forms\u003cbr\u003e9.3.1 Wraps\u003cbr\u003e9.3.2 Bags,Sacks and Pouches\u003cbr\u003e9.3.3 Pouch Production\u003cbr\u003e9.3.4 Dispensing and Reclosure Features\u003cbr\u003e9.4 Heat-Sealing\u003cbr\u003e9.5 Other Uses of Packaging Films\u003cbr\u003e9.6 Major Packaging Films\u003cbr\u003e9.6.1 Low-Density Polyethylene (LDPE)and Linear Low-Density Polyethylene (LLDPE)\u003cbr\u003e9.6.2 High-Density Polyethylene (HDPE)\u003cbr\u003e9.6.3 Polypropylene (PP)\u003cbr\u003e9.6.4 Polyvinyl Chloride (PVC)\u003cbr\u003e9.6.5 Polyethylene Terephthalate (PET)\u003cbr\u003e9.6.6 Polyvinylidene Chloride (PVDC)\u003cbr\u003e9.6.7 Polychlorotrifluoroethylene (PCTFE)\u003cbr\u003e9.6.8 Polyvinyl Alcohol (PVOH)\u003cbr\u003e9.6.9 Ethylene-Vinyl Alcohol (EVOH)\u003cbr\u003e9.6.10 Polyamide (Nylon)\u003cbr\u003e9.6.11 Ethylene-Vinyl Acetate (EVA)and Acid Copolymer Films\u003cbr\u003e9.6.12 Ionomers\u003cbr\u003e9.6.13 Other Plastics\u003cbr\u003e9.7 Multilayer Plastic Films\u003cbr\u003e9.7.1 Coating\u003cbr\u003e9.7.2 Lamination\u003cbr\u003e9.7.3 Coextrusion\u003cbr\u003e9.7.4 Metallisation\u003cbr\u003e9.7.5 Silicon Oxide Coating\u003cbr\u003e9.7.6 Other Inorganic Barrier Coatings\u003cbr\u003e9.8 Surface Treatment\u003cbr\u003e9.9 Static Discharge\u003cbr\u003e9.10 Printing\u003cbr\u003e9.11 Barriers and Permeation\u003cbr\u003e9.12 Environmental Issues \u003cbr\u003e\u003cbr\u003e10. Applications of Plastic Films in Agriculture\u003cbr\u003e10.1 Introduction\u003cbr\u003e10.2 Production of Plastic Films\u003cbr\u003e10.3 Characteristics of Plastic Films Used in Agriculture\u003cbr\u003e10.4 Stability of Greenhouse Films to Solar Irradiation\u003cbr\u003e10.4.1 Ultraviolet Stabilisers\u003cbr\u003e10.4.2 Requirements for Stabiliser Efficiency\u003cbr\u003e10.4.3 Evaluation of Laboratory and Outdoor Photooxidation\u003cbr\u003e10.5 Other Factors Affecting the Stability of Greenhouse Films\u003cbr\u003e10.5.1 Temperature\u003cbr\u003e10.5.2 Humidity\u003cbr\u003e10.5.3 Wind\u003cbr\u003e10.5.4 Fog Formation\u003cbr\u003e10.5.5 Environmental Pollution\u003cbr\u003e10.5.6 Effects of Pesticides\u003cbr\u003e10.6 Ageing Resistance of Greenhouse Films\u003cbr\u003e10.6.1 Measurement of Ageing Factors\u003cbr\u003e10.6.2 Changes in Chemical Structure\u003cbr\u003e10.7 Recycling of Plastic Films in Agriculture\u003cbr\u003e10.7.1 Introduction\u003cbr\u003e10.7.2 Contamination by the Environment \u003cbr\u003e\u003cbr\u003e11. Physicochemical Criteria for Estimating the Efficiency of Burn Dressings\u003cbr\u003e11.1 Introduction\u003cbr\u003e11.2 Modern Surgical Burn Dressings\u003cbr\u003e11.2.1 Dressings Based on Materials of Animal Origin\u003cbr\u003e11.2.2 Dressings Based on Synthetic Materials\u003cbr\u003e11.2.3 Dressings Based on Materials of Vegetable Origin\u003cbr\u003e11.3 Selection of the Properties of Tested Burn Dressings\u003cbr\u003e11.3.1 Sorption-Diffusion Properties\u003cbr\u003e11.3.2 Adhesive Properties\u003cbr\u003e11.3.3 Mechanical Properties\u003cbr\u003e11.4 Methods of Investigation of Physicochemical Properties of Burn Dressings\u003cbr\u003e11.4.1 Determination of Material Porosity\u003cbr\u003e11.4.2 Determination of Size and Number of Pores\u003cbr\u003e11.4.3 Estimation of Surface Energy at Material-Medium Interface\u003cbr\u003e11.4.4 Determination of Sorptional Ability of Materials\u003cbr\u003e11.4.5 Determination of Air Penetrability of Burn Dressings\u003cbr\u003e11.4.6 Determination of Adhesion of Burn Dressings\u003cbr\u003e11.4.7 Determination of Vapour Penetrability of Burn Dressings\u003cbr\u003e11.5 Results and Discussion\u003cbr\u003e11.5.1 Determination of Sorption Ability of Burn Dressings\u003cbr\u003e11.5.2 Kinetics of the Sorption of Liquid Media by Burn Dressings\u003cbr\u003e11.5.3 Determination of Vapour Penetrability of Burn Dressings\u003cbr\u003e11.5.4 Determination of the Air Penetrability of Burn Dressings\u003cbr\u003e11.5.5 Determination of Adhesion of Burn Dressings\u003cbr\u003e11.6 The Model of Action of a Burn Dressing\u003cbr\u003e11.6.1 Evaporation of Water from the Dressing Surface\u003cbr\u003e11.6.2 Sorption of Fluid by Burn Dressing from Bulk Containing a Definite Amount of Fluid\u003cbr\u003e11.6.3 Mass Transfer of Water from Wound to Surroundings\u003cbr\u003e11.7 Criteria for the Efficiency of First-Aid Burn Dressings\u003cbr\u003e11.7.1 Requirements of a First-Aid Burn Dressing\u003cbr\u003e11.7.2 Characteristics of First-Aid Burn Dressings\u003cbr\u003e11.8 Conclusion P\u003cbr\u003e\u003cbr\u003e12. Testing of Plastic Films\u003cbr\u003e12.1 Introduction\u003cbr\u003e12.2 Requirements for Test Methods\u003cbr\u003e12.2.1 List of Requirements\u003cbr\u003e12.2.2 Interpretation of Test Results\u003cbr\u003e12.3 Some Properties of Plastic Films\u003cbr\u003e12.3.1 Dimensions\u003cbr\u003e12.3.2 Conditioning the Samples\u003cbr\u003e12.4 Mechanical Tests\u003cbr\u003e12.4.1 Tensile Testing (Static)\u003cbr\u003e12.4.2 Impact Resistance\u003cbr\u003e12.4.3 Tear Resistance\u003cbr\u003e12.4.4 Bending Stiffness (Flexural Modulus\u003cbr\u003e12.4.5 Dynamic Mechanical Properties\u003cbr\u003e12.5.2 Indices of Refraction and Yellowness\u003cbr\u003e12.5 Some Physical,Chemical and Physicochemical Tests\u003cbr\u003e12.5.1 Density of Plastics\u003cbr\u003e12.5.3 Transparency\u003cbr\u003e12.5.4 Resistance to Chemicals\u003cbr\u003e12.5.5 Haze and Luminous Transmittance\u003cbr\u003e12.5.6 Ignition,Rate of Burning Characteristics and Oxygen Index (OI)\u003cbr\u003e12.5.7 Static and Kinetic Coefficients of Friction\u003cbr\u003e12.5.8 Specular Gloss of Plastic Films and Solid Plastics\u003cbr\u003e12.5.9 Wetting Tension of PE and PP Films\u003cbr\u003e12.5.10 Unrestrained Linear Thermal Shrinkage of Plastic Films\u003cbr\u003e12.5.11 Shrink Tension and Orientation Release Stress\u003cbr\u003e12.5.12 Rigidity\u003cbr\u003e12.5.13 Blocking Load by Parallel-Plate Method\u003cbr\u003e12.5.14 Determination of LLDPE Composition by 13C NMR\u003cbr\u003e12.5.15 Creep and Creep Rupture\u003cbr\u003e12.5.16 Outdoor Weathering\/Weatherability\u003cbr\u003e12.5.17 Abrasion Resistance\u003cbr\u003e12.5.18 Mar Resistance\u003cbr\u003e12.5.19 Environmental Stress Cracking\u003cbr\u003e12.5.20 Water Vapour Permeability\u003cbr\u003e12.5.21 Oxygen Gas Transmission\u003cbr\u003e12.6 Standard Specifications for Some Plastic Films\u003cbr\u003e12.6.1 Standard Specification for PET Films\u003cbr\u003e12.6.2 Standard Specification for LDPE Films (for General Use and Packaging Applications)\u003cbr\u003e12.6.3 Standard Specification for MDPE and General Grade PE Films (for General Use and Packaging Applications)\u003cbr\u003e12.6.4 Standard Specification for OPP Films\u003cbr\u003e12.6.5 Standard Specification for Crosslinkable Ethylene Plastics \u003cbr\u003e\u003cbr\u003e13. Recycling of Plastic Waste\u003cbr\u003e13.1 Introduction\u003cbr\u003e13.2 Main Approaches to Plastic Recycling\u003cbr\u003e13.2.1 Primary Recycling\u003cbr\u003e13.2.2 Secondary Recycling\u003cbr\u003e13.2.3 Tertiary Recycling\u003cbr\u003e13.2.4 Quaternary Recycling\u003cbr\u003e13.2.5 Conclusion\u003cbr\u003e13.3 Collection and Sorting\u003cbr\u003e13.3.1 Resin Identification\u003cbr\u003e13.3.2 General Aspects of Resin Separation\u003cbr\u003e13.3.3 Resin Separation Based on Density\u003cbr\u003e13.3.4 Resin Separation Based on Colour\u003cbr\u003e13.3.5 Resin Separation Based on Physicochemical Properties\u003cbr\u003e13.4 Recycling of Separated PET Waste\u003cbr\u003e13.5 Recycling of Separated PVC Waste\u003cbr\u003e13.5.1 Chemical Recycling of Mixed Plastic Waste\u003cbr\u003e13.5.2 Chemical Recycling of PVC-Rich Waste\u003cbr\u003e13.6 Recycling of Separated PE Waste\u003cbr\u003e13.6.1 Contamination of PE Waste by Additives\u003cbr\u003e13.6.2 Contamination of PE Waste by Reprocessing\u003cbr\u003e13.7 Recycling of HDPE\u003cbr\u003e13.7.1 Applications for Recycled HDPE\u003cbr\u003e13.7.2 Rubber-Modified Products\u003cbr\u003e13.8 Recycling Using Radiation Technology\u003cbr\u003e13.9 Biodegradable Polymers\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nElsayed Abdel-Bary took his first degree at Cairo University and studied for his PhD at the Institute of Fine Chemical Technology in Moscow. He became a Professor in the Faculty of Science at Mansoura University in 1979 and subsequently founded the University’s Polymer Research Centre. He has published widely on the subject of polymer science, to date he has over 100 papers\/book chapters credited to him. Elsayed is the Editor-in-Chief of Packplast International and Interplas International, the Vice-President of the Egyptian Chemical Society and a member of the IUPAC Academy of Scientific Research and Technology."}
Description Author: ISBN 978-0-815515814 591 Pages, 480 Illustrations, Hardbound Summary This practical guide to plastic joining processes is composed of two parts: processes and materials. The processing part is divided into 15 chapters each discussing different joining technique. The joining methods discussed include: heated tool, hot gas, vibration, spin, ultrasonic, induction, radio frequency, microwave, resistance,...
$290.00
in stock
{"id":11242232708,"title":"Handbook of Plastic Joining 2nd Edition","handle":"978-0-815515814","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: \u003cbr\u003eISBN 978-0-815515814 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e591 Pages, 480 Illustrations, Hardbound\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis practical guide to plastic joining processes is composed of two parts: processes and materials. The processing part is divided into 15 chapters each discussing different joining technique. The joining methods discussed include: heated tool, hot gas, vibration, spin, ultrasonic, induction, radio frequency, microwave, resistance, extrusion, electrofusion, infrared, and laser welding techniques, mechanical fastening and chemical bonding. \u003cbr\u003e\u003cbr\u003eSystematic approach was taken to discuss each method. Typically, the following subjects are discussed for each method: process, processing parameters, materials, weld microstructure, effects of aging on weld strength, equipment, advantages and disadvantages, and applications. This gives concise but thorough evaluation of the potentials of each method and includes required knowledge to use this information for practical purposes. \u003cbr\u003e\u003cbr\u003eNumerous illustrations provide visual assistance in understanding the method and required equipment. Many practical observations are included under application and advantages and disadvantages which assist in method and parameters selection for the successful operation and process. \u003cbr\u003e\u003cbr\u003eThe second part of the book is divided according to the generic names of polymers used in joining techniques. This part includes 25 generic names of polymers, each containing information on one or more polymers or polymer mixtures. The polymers involved are grouped within thermoplastics, thermoplastic elastomers, thermosets, and rubbers. In total, there are 84 chapters devoted to the individual polymers. \u003cbr\u003e\u003cbr\u003eEach chapter on a particular polymer contains information organized according to different joining methods used for this polymer and typical commercial materials which belong to this polymer group. \u003cbr\u003e\u003cbr\u003eInformation given for each material covers available test data, observations from practical use of different methods, for a chosen commercial material, and a general research information on process and product. Suitable surface treatment methods and cleaners are also discussed. If technical drawings may assist users in understanding the details of the processes, they are provided. \u003cbr\u003e\u003cbr\u003eThe book contains, in addition, a glossary of important terms, references, figures, subject indices as well as supplier's directory. \u003cbr\u003e\u003cbr\u003eIt is safe to conclude that the book contains data and know-how information required for successful process application. Both current users and those who consider to enter the field of plastics joining will find this book invaluable in their practice. Considering that most of the plastics must be processed by one of these methods to produce the final goods, this book is needed for all who work in polymer industry, regardless of the focus of their activities. Production of a good final product requires concerted effort of polymer research chemist, plastic designer and compounder, part designer, manufacturing engineers and they all will benefit from frequent consulting this comprehensive resource.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJoining Methods Include:\u003c\/strong\u003e\u003cbr\u003e Adhesive Bonding\u003cbr\u003e Electrofusion Bonding\u003cbr\u003e Friction Welding\u003cbr\u003e Heated Tool Welding\u003cbr\u003e High Frequency Welding\u003cbr\u003e Hot Gas Welding\u003cbr\u003e Induction Welding\u003cbr\u003e Infrared Welding\u003cbr\u003e Laser Welding\u003cbr\u003e Mechanical Fastening\u003cbr\u003eOther Features Include\u003cbr\u003e Joint Process Selection\u003cbr\u003e Applications\u003cbr\u003e Joint Design\u003cbr\u003e Welding Process Optimization\u003cbr\u003e Mistakes to Avoid\u003cbr\u003eGlossary of Terms\u003cbr\u003eSource Documentation\u003cbr\u003eIndices\u003c\/p\u003e","published_at":"2017-06-22T21:14:21-04:00","created_at":"2017-06-22T21:14:21-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2008","book","chemical bonding","electrofusion","extrusion","heated tool","hot gas","induction","infrared","laser welding techniques","mechanical fastening","microwave","p-applications","polymer","radio frequency","resistance","spin","ultrasonic","vibration"],"price":29000,"price_min":29000,"price_max":29000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378412996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Plastic Joining 2nd Edition","public_title":null,"options":["Default Title"],"price":29000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-815515814","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-815515814.jpg?v=1499442793"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-815515814.jpg?v=1499442793","options":["Title"],"media":[{"alt":null,"id":355733438557,"position":1,"preview_image":{"aspect_ratio":0.774,"height":499,"width":386,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-815515814.jpg?v=1499442793"},"aspect_ratio":0.774,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-815515814.jpg?v=1499442793","width":386}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: \u003cbr\u003eISBN 978-0-815515814 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003e591 Pages, 480 Illustrations, Hardbound\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis practical guide to plastic joining processes is composed of two parts: processes and materials. The processing part is divided into 15 chapters each discussing different joining technique. The joining methods discussed include: heated tool, hot gas, vibration, spin, ultrasonic, induction, radio frequency, microwave, resistance, extrusion, electrofusion, infrared, and laser welding techniques, mechanical fastening and chemical bonding. \u003cbr\u003e\u003cbr\u003eSystematic approach was taken to discuss each method. Typically, the following subjects are discussed for each method: process, processing parameters, materials, weld microstructure, effects of aging on weld strength, equipment, advantages and disadvantages, and applications. This gives concise but thorough evaluation of the potentials of each method and includes required knowledge to use this information for practical purposes. \u003cbr\u003e\u003cbr\u003eNumerous illustrations provide visual assistance in understanding the method and required equipment. Many practical observations are included under application and advantages and disadvantages which assist in method and parameters selection for the successful operation and process. \u003cbr\u003e\u003cbr\u003eThe second part of the book is divided according to the generic names of polymers used in joining techniques. This part includes 25 generic names of polymers, each containing information on one or more polymers or polymer mixtures. The polymers involved are grouped within thermoplastics, thermoplastic elastomers, thermosets, and rubbers. In total, there are 84 chapters devoted to the individual polymers. \u003cbr\u003e\u003cbr\u003eEach chapter on a particular polymer contains information organized according to different joining methods used for this polymer and typical commercial materials which belong to this polymer group. \u003cbr\u003e\u003cbr\u003eInformation given for each material covers available test data, observations from practical use of different methods, for a chosen commercial material, and a general research information on process and product. Suitable surface treatment methods and cleaners are also discussed. If technical drawings may assist users in understanding the details of the processes, they are provided. \u003cbr\u003e\u003cbr\u003eThe book contains, in addition, a glossary of important terms, references, figures, subject indices as well as supplier's directory. \u003cbr\u003e\u003cbr\u003eIt is safe to conclude that the book contains data and know-how information required for successful process application. Both current users and those who consider to enter the field of plastics joining will find this book invaluable in their practice. Considering that most of the plastics must be processed by one of these methods to produce the final goods, this book is needed for all who work in polymer industry, regardless of the focus of their activities. Production of a good final product requires concerted effort of polymer research chemist, plastic designer and compounder, part designer, manufacturing engineers and they all will benefit from frequent consulting this comprehensive resource.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eJoining Methods Include:\u003c\/strong\u003e\u003cbr\u003e Adhesive Bonding\u003cbr\u003e Electrofusion Bonding\u003cbr\u003e Friction Welding\u003cbr\u003e Heated Tool Welding\u003cbr\u003e High Frequency Welding\u003cbr\u003e Hot Gas Welding\u003cbr\u003e Induction Welding\u003cbr\u003e Infrared Welding\u003cbr\u003e Laser Welding\u003cbr\u003e Mechanical Fastening\u003cbr\u003eOther Features Include\u003cbr\u003e Joint Process Selection\u003cbr\u003e Applications\u003cbr\u003e Joint Design\u003cbr\u003e Welding Process Optimization\u003cbr\u003e Mistakes to Avoid\u003cbr\u003eGlossary of Terms\u003cbr\u003eSource Documentation\u003cbr\u003eIndices\u003c\/p\u003e"}
Description Author: Charles A. Harper ISBN 978-0-471-66255-6 pages 763, hardcover Summary An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given...
$180.00
in stock
{"id":11242212612,"title":"Handbook of Plastic Processes","handle":"978-0-471-66255-6","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Charles A. Harper \u003cbr\u003eISBN 978-0-471-66255-6 \u003cbr\u003e\u003cbr\u003epages 763, hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nAn outstanding and thorough presentation of the complete field of plastics processing \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHandbook of Plastic Processes\u003c\/strong\u003e is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. \u003cbr\u003e\u003cbr\u003eThe authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. \u003cbr\u003e\u003cbr\u003eCoverage includes chapters on: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eInjection molding\u003c\/li\u003e\n\u003cli\u003eCompression and transfer molding\u003c\/li\u003e\n\u003cli\u003eSheet extrusion\u003c\/li\u003e\n\u003cli\u003eBlow molding\u003c\/li\u003e\n\u003cli\u003eCalendering\u003c\/li\u003e\n\u003cli\u003eFoam processing\u003c\/li\u003e\n\u003cli\u003eReinforced plastics processing\u003c\/li\u003e\n\u003cli\u003eLiquid resin processing\u003c\/li\u003e\n\u003cli\u003eRotational molding\u003c\/li\u003e\n\u003cli\u003eThermoforming\u003c\/li\u003e\n\u003cli\u003eReaction injection molding\u003c\/li\u003e\n\u003cli\u003eCompounding, mixing, and blending\u003c\/li\u003e\n\u003cli\u003eMachining and mechanical fabrication\u003c\/li\u003e\n\u003cli\u003eAssembly, finishing, and decorating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eEach chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. \u003cbr\u003e\u003cbr\u003eBecause of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.\u003cbr\u003e\u003cbr\u003e \n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface. \u003cbr\u003e\u003cbr\u003e1. Injection Molding (Peter F. Grelle) \u003cbr\u003e\u003cbr\u003e2. Assisted Injection Molding (Steve Ham) \u003cbr\u003e\u003cbr\u003e3. Sheet Extrusion (Dana R. Hanson) \u003cbr\u003e\u003cbr\u003e4. Thermoforming (Scott Macdonald) \u003cbr\u003e\u003cbr\u003e5. Blow Molding (Norman C. Lee) \u003cbr\u003e\u003cbr\u003e6. Rotational Molding (Paul Nugent) \u003cbr\u003e\u003cbr\u003e7. Compression and Transfer Molding (John L. Hull) \u003cbr\u003e\u003cbr\u003e8. Composite Processes (Dale A. Grove) \u003cbr\u003e\u003cbr\u003e9. Liquid Resin Processes (John L. Hull and Steven J. Adamson) \u003cbr\u003e\u003cbr\u003e10. Assembly (Edward M. Petrie). \u003cbr\u003e\u003cbr\u003e11. Decorating and Finishing (Edward M. Petrie and John L. Hull). \u003cbr\u003e\u003cbr\u003e12. Polymer Nanocomposite Processing (Nandika Anne D'Souza, Jo Ann Ratto, Ajit Ranade, Will Strauss and Laxmi Sahu). \u003cbr\u003e\u003cbr\u003eIndex.\u003cbr\u003e\u003cbr\u003e \n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nCHARLES A. HARPER is President of Technology Seminars, Inc., an organization that has provided educational seminars to the industry for over twenty years. An engineering graduate of The Johns Hopkins University, where he has also served as an adjunct professor, Mr. Harper has held leadership roles in many professional societies and organizations and is a Fellow of the Society for the Advancement of Materials and Process Engineering. He is the author or editor of numerous books in the plastics and materials fields.","published_at":"2017-06-22T21:13:16-04:00","created_at":"2017-06-22T21:13:17-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2006","and blending Machining and mechanical fabrication Assembly","and decorating Each chapter details a particular process","and its advantages and limitations. Because of its increasing impact on the industry","blending Thermoforming Reaction injection molding Compounding","blow molding","book","calendering","compounding","compression","extrusion","finishing","foam","injection molding","its variations","liquid resin","mixing","moulding","p-processing","polymer","reinforced plastics","rotational molding","sheet","the editor has also added a chapter on nanotechnology in plastics processing.","the equipment used","the range of materials utilized in the process","transfer molding"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378342980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Plastic Processes","public_title":null,"options":["Default Title"],"price":18000,"weight":1000,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-471-66255-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-66255-6.jpg?v=1499470842"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-66255-6.jpg?v=1499470842","options":["Title"],"media":[{"alt":null,"id":356334207069,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-66255-6.jpg?v=1499470842"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-66255-6.jpg?v=1499470842","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Charles A. Harper \u003cbr\u003eISBN 978-0-471-66255-6 \u003cbr\u003e\u003cbr\u003epages 763, hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nAn outstanding and thorough presentation of the complete field of plastics processing \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHandbook of Plastic Processes\u003c\/strong\u003e is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. \u003cbr\u003e\u003cbr\u003eThe authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. \u003cbr\u003e\u003cbr\u003eCoverage includes chapters on: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eInjection molding\u003c\/li\u003e\n\u003cli\u003eCompression and transfer molding\u003c\/li\u003e\n\u003cli\u003eSheet extrusion\u003c\/li\u003e\n\u003cli\u003eBlow molding\u003c\/li\u003e\n\u003cli\u003eCalendering\u003c\/li\u003e\n\u003cli\u003eFoam processing\u003c\/li\u003e\n\u003cli\u003eReinforced plastics processing\u003c\/li\u003e\n\u003cli\u003eLiquid resin processing\u003c\/li\u003e\n\u003cli\u003eRotational molding\u003c\/li\u003e\n\u003cli\u003eThermoforming\u003c\/li\u003e\n\u003cli\u003eReaction injection molding\u003c\/li\u003e\n\u003cli\u003eCompounding, mixing, and blending\u003c\/li\u003e\n\u003cli\u003eMachining and mechanical fabrication\u003c\/li\u003e\n\u003cli\u003eAssembly, finishing, and decorating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003eEach chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. \u003cbr\u003e\u003cbr\u003eBecause of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.\u003cbr\u003e\u003cbr\u003e \n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface. \u003cbr\u003e\u003cbr\u003e1. Injection Molding (Peter F. Grelle) \u003cbr\u003e\u003cbr\u003e2. Assisted Injection Molding (Steve Ham) \u003cbr\u003e\u003cbr\u003e3. Sheet Extrusion (Dana R. Hanson) \u003cbr\u003e\u003cbr\u003e4. Thermoforming (Scott Macdonald) \u003cbr\u003e\u003cbr\u003e5. Blow Molding (Norman C. Lee) \u003cbr\u003e\u003cbr\u003e6. Rotational Molding (Paul Nugent) \u003cbr\u003e\u003cbr\u003e7. Compression and Transfer Molding (John L. Hull) \u003cbr\u003e\u003cbr\u003e8. Composite Processes (Dale A. Grove) \u003cbr\u003e\u003cbr\u003e9. Liquid Resin Processes (John L. Hull and Steven J. Adamson) \u003cbr\u003e\u003cbr\u003e10. Assembly (Edward M. Petrie). \u003cbr\u003e\u003cbr\u003e11. Decorating and Finishing (Edward M. Petrie and John L. Hull). \u003cbr\u003e\u003cbr\u003e12. Polymer Nanocomposite Processing (Nandika Anne D'Souza, Jo Ann Ratto, Ajit Ranade, Will Strauss and Laxmi Sahu). \u003cbr\u003e\u003cbr\u003eIndex.\u003cbr\u003e\u003cbr\u003e \n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nCHARLES A. HARPER is President of Technology Seminars, Inc., an organization that has provided educational seminars to the industry for over twenty years. An engineering graduate of The Johns Hopkins University, where he has also served as an adjunct professor, Mr. Harper has held leadership roles in many professional societies and organizations and is a Fellow of the Society for the Advancement of Materials and Process Engineering. He is the author or editor of numerous books in the plastics and materials fields."}
Description Author: George Wypych Editor ISBN 978-1-895198-50-8 Pages 748, Tables 114, Figures 416, References 3876 Summary This book contains the comprehensive review of information available in open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The book contains information from the most recent sources and updated information from the previous edition. The...
$285.00
in stock
{"id":11242200196,"title":"Handbook of Plasticizers, 2nd Edition","handle":"978-1-895198-50-8","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych Editor \u003cbr\u003eISBN 978-1-895198-50-8 \u003cbr\u003e\u003cbr\u003ePages 748, Tables 114, Figures 416, References 3876\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book contains the comprehensive review of information available in open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The book contains information from the most recent sources and updated information from the previous edition. \u003cbr\u003e\u003cbr\u003eThe information available today permits to use plasticizers more effectively and to avoid certain plasticizers in applications where they may cause health or material durability problems. Plasticizer incorporation demands a broad background of information because plasticizers are now added to complex mixtures containing the variety of materials which may have different reactions to the presence of plasticizers. Plasticizer's choice is also not simple because there is a large selection of commercial plasticizers and various environmental issues dictating preferred solutions.\u003cbr\u003e\u003cbr\u003eBoth aspects considered indicate the need for a comprehensive source which, using currently available means of the computerized database should provide data and a broad background of theoretical information in the condensed form easy to search. \u003cbr\u003e\u003cbr\u003eAll numerical data are in the form of database (see information on Plasticizer Database which is a separate publication), whereas the theoretical component of information is given in the traditional form of a printed book.\u003cbr\u003e\u003cbr\u003eTwenty one chapters are included in Handbook of Plasticizers. Full Table of Contents is also available for review. Only some chapters are discussed here to add more information which may not be obvious from the table of contents.\u003cbr\u003e\u003cbr\u003eData are available for a large number of commercial plasticizers. This data is used in Chapter 2 to specify typical properties of plasticizers which belong to one of the groups and also to give ranges of expected properties for a given group.\u003cbr\u003e\u003cbr\u003eChapters 5, 6 and 7 contain new and historical approaches, which explain mechanisms of plasticizers action and their behavior in plasticized systems. This theoretical background helps to understand practical observations and provides guidance to the methods of material improvement. Chapter 9 shows plasticization steps and results of various analytical studies which help in understanding these steps and parameters which may control them.\u003cbr\u003e\u003cbr\u003eTwenty five Sections of Chapter 10 discuss plasticizers effect on physical and mechanical properties of plasticized materials. These sections are essential for understanding the behavior of materials and principles of their formulation. \u003cbr\u003e\u003cbr\u003eChapter 11 contains data on the use of plasticizers in 61 groups of polymers. The information is grouped under the following sections – Frequently used plasticizers, Practical concentrations, Main functions performed by plasticizers, Mechanism of plasticizer action, Effect of plasticizers on polymer and other additives, and Typical formulations. Use of such consistent method of data presentation helps to find information quickly and to compare data from various sources and applications. \u003cbr\u003e\u003cbr\u003eSimilar, Chapter 13 discusses the use of plasticizers in 34 groups of products according to a similar breakdown including Plasticizer types, Plasticizer concentration, Reasons for plasticizer use, Advantages and disadvantages of plasticizers use, Effect of plasticizers on product properties, and Examples of formulations. Both chapters make use of a large number of patents and information in open literature discussing the most current findings and trends.\u003cbr\u003e\u003cbr\u003eIn Chapter 14 attempts are being made to discuss the following topics: Effect of plasticizers on process conditions, Processing defects formation and elimination with use of plasticizers, Influence of rheological changes on the process, Equipment maintenance, and Energy consumption. This chapter discusses 15 methods of polymer and rubber processing.\u003cbr\u003e\u003cbr\u003eSeveral chapters which follow discuss various aspects of plasticizer effect on health, safety, and environment. Chapter 17 contains opinions of renowned experts on various aspects of plasticizers effect on health and safety. Chapter 18 contains information on plasticizers persistence in soil and water. Plasticizers releases and their presence in the environment are discussed for many important commercial plasticizers.\u003cbr\u003e\u003cbr\u003eThis short review and the Table of Contents show that this book is the most comprehensive source of current information on plasticizers. Plasticizers are used in so many products that every library should have this reference source of information on plasticizers readily available for its readers. Especially considering that so many aspects of application plasticizers have recently changed that older books cannot provide right answers. This book should be used in conjunction with Plasticizer Database which gives information on the present status and properties of industrial and research plasticizers.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION \u003cbr\u003e1.1 Historical developments \u003cbr\u003e1.2 Expectations from plasticizers\u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e2 PLASTICIZER TYPES \u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Characteristic properties of industrial plasticizers \u003cbr\u003e2.2.1 Abietates \u003cbr\u003e2.2.2 Adipates \u003cbr\u003e2.2.3 Alkyl sulfonates \u003cbr\u003e2.2.4 Amides and amines \u003cbr\u003e2.2.5 Azelates\u003cbr\u003e2.2.6 Benzoates\u003cbr\u003e2.2.7 Bioplasticizers \u003cbr\u003e2.2.8 Biodegradable plasticizers \u003cbr\u003e2.2.9 Chlorinated paraffins \u003cbr\u003e2.2.10 Citrates \u003cbr\u003e2.2.11 Cycloxehane dicarboxylate \u003cbr\u003e2.2.12 Cyclohexane dicarboxylic acid, diisononyl ester \u003cbr\u003eMax Kron \u003cbr\u003e2.2.13 Energetic plasticizers\u003cbr\u003e2.2.14 Epoxides\u003cbr\u003e2.2.15 Esters of C10-30 dicarboxylic acids \u003cbr\u003e2.2.16 Ether-ester plasticizers \u003cbr\u003e2.2.17 Glutarates\u003cbr\u003e2.2.18 Hydrocarbon oils \u003cbr\u003e2.2.19 Isobutyrates\u003cbr\u003e2.2.20 Maleates \u003cbr\u003e2.2.21 Oleates \u003cbr\u003e2.2.22 Pentaerythritol derivatives \u003cbr\u003e2.2.23 Phosphates \u003cbr\u003e2.2.24 Phthalate-free plasticizers \u003cbr\u003e2.2.25 Phthalates \u003cbr\u003e2.2.26 Polymeric plasticizers \u003cbr\u003e2.2.27 Ricinoleates \u003cbr\u003e2.2.28 Sebacates \u003cbr\u003e2.2.29 Sulfonamides \u003cbr\u003e2.2.30 Superplasticizers and plasticizers for concrete\u003cbr\u003e2.2.31 Tri- and pyromellitates \u003cbr\u003e2.2.32 Other plasticizers \u003cbr\u003e2.3 Methods of synthesis and their effect on properties of plasticizers\u003cbr\u003e2.4 Reactive plasticizers and internal \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e3 TYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS\u003cbr\u003e3.1 Abbreviations, terminology, and vocabulary\u003cbr\u003e3.2 Acid number \u003cbr\u003e3.3 Aging studies \u003cbr\u003e3.4 Ash \u003cbr\u003e3.5 Brittleness temperature \u003cbr\u003e3.6 Brookfield viscosity \u003cbr\u003e3.7 Chemical resistance \u003cbr\u003e3.8 Color \u003cbr\u003e3.9 Compatibility \u003cbr\u003e3.10 Compression set \u003cbr\u003e3.11 Concrete additives \u003cbr\u003e3.12 Electrical properties \u003cbr\u003e3.13 Extractable matter \u003cbr\u003e3.14 Flash and fire point \u003cbr\u003e3.15 Fogging\u003cbr\u003e3.16 Fusion\u003cbr\u003e3.17 Gas chromatography\u003cbr\u003e3.18 Hardness \u003cbr\u003e3.19 Infrared analysis of plasticizers \u003cbr\u003e3.20 Kinematic viscosity \u003cbr\u003e3.21 Marking (classification) \u003cbr\u003e3.22 Melt rheology\u003cbr\u003e3.23 Migration \u003cbr\u003e3.24 Poly(vinyl chloride) – standard specification \u003cbr\u003e3.25 Powder-mix time\u003cbr\u003e3.26 Purity\u003cbr\u003e3.27 Refractive index\u003cbr\u003e3.28 Residual contamination \u003cbr\u003e3.29 Sampling \u003cbr\u003e3.30 Saponification value\u003cbr\u003e3.31 Saybolt viscosity\u003cbr\u003e3.32 Sorption of plasticizer\u003cbr\u003e3.33 Specific gravity \u003cbr\u003e3.34 Specification\u003cbr\u003e3.35 Staining \u003cbr\u003e3.36 Stiffness\u003cbr\u003e3.37 Tensile properties\u003cbr\u003e3.38 Thermal expansion coefficient \u003cbr\u003e3.39 Unsaponifiable contents \u003cbr\u003e3.40 Viscosity of plastisols and organosols \u003cbr\u003e3.41 Water concentration\u003cbr\u003e3.42 Weight \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e4 TRANSPORTATION AND STORAGE\u003cbr\u003e4.1 Transportation\u003cbr\u003e4.2 Storage \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e5 MECHANISMS OF PLASTICIZERS ACTION\u003cbr\u003eA. Marcilla and M. Beltrán \u003cbr\u003e5.1 Classical theories \u003cbr\u003e5.1.1 The lubricity theory\u003cbr\u003e5.1.2 The gel theory \u003cbr\u003e5.1.3 Moorshead's empirical approach \u003cbr\u003e5.2 The free volume theory \u003cbr\u003e5.2.1 Mathematical models \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e6 THEORIES OF COMPATIBILITY\u003cbr\u003eValery Yu. Senichev and Vasiliy V. Tereshatov \u003cbr\u003e6.1 Compatibility concepts \u003cbr\u003e6.1.1 Thermodynamic treatment \u003cbr\u003e6.1.2 Interaction parameter\u003cbr\u003e6.1.3 Effect of chemical structure of plasticizers and matrix \u003cbr\u003e6.2 Solubility parameter and the cohesive energy density \u003cbr\u003e6.2.1 Solubility parameter concept \u003cbr\u003e6.2.2 Experimental evaluation of solubility parameters of plasticizers \u003cbr\u003e6.2.3 Methods of experimental evaluation and calculation of solubility parameters of polymers \u003cbr\u003e6.2.4 The methods of calculation of solubility parameters \u003cbr\u003e6.2.5 Multi-dimensional approaches \u003cbr\u003e6.3 Methods of plasticizer selection based on principles of compatibility\u003cbr\u003e6.3.1 How much plasticizer is necessary for a polymer composition? \u003cbr\u003e6.3.2 Initial experimental estimation of compatibility \u003cbr\u003e6.3.3 Thermodynamic compatibility \u003cbr\u003e6.4 Practical approaches in using theory of compatibility for plasticizers selection \u003cbr\u003e6.5 Experimental data illustrating effect of compatibility on plasticized systems \u003cbr\u003e6.5.1 Influence of compatibility on the physical stability of the plasticized polymer\u003cbr\u003e6.5.2 Influence of compatibility on viscosity of the plasticized composition\u003cbr\u003e6.5.3 Influence of compatibility on mechanical properties and physical properties of plasticized polymer\u003cbr\u003e\u003cbr\u003e7 PLASTICIZER MOTION AND DIFFUSION\u003cbr\u003e7.1 Plasticizer diffusion rate and the methods of study\u003cbr\u003e7.2 Plasticizer motion and distribution in matrix \u003cbr\u003e7.3 Plasticizer migration\u003cbr\u003e7.4 Plasticizer distribution of materials in contact \u003cbr\u003eVasiliy V Tereshatov and Valery Yu Senichev\u003cbr\u003e7.5 Antiplasticization \u003cbr\u003e7.6 Effect of diffusion and mobility of plasticizers on their \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e8 EFFECT OF PLASTICIZERS ON OTHER COMPONENTS OF FORMULATION\u003cbr\u003e8.1 Plasticizer consumption by fillers \u003cbr\u003e8.2 Solubility of additives in plasticizers \u003cbr\u003e8.3 Additive molecular mobility and transport in the presence of plasticizers \u003cbr\u003e8.4 Effect of plasticizers on polymerization and curing reactions \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e9 PLASTICIZATION STEPS \u003cbr\u003eA. Marcilla, J. C. García, and M. Beltrán \u003cbr\u003e9.1 Plasticization steps\u003cbr\u003e9.2 Studies of plastisol's behavior during gelation and fusion \u003cbr\u003e9.2.1 Rheological characterization \u003cbr\u003e9.2.2 Studies by scanning electron microscopy \u003cbr\u003e9.2.3 Study of polymer-plasticizer interactions by DSC \u003cbr\u003e9.2.4 Study of polymer-plasticizer interactions by SALS\u003cbr\u003e9.2.5 Study of polymer-plasticizer interactions by FTIR \u003cbr\u003e9.2.6 Study of polymer-plasticizer interactions by \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e10 EFFECT OF PLASTICIZERS ON PROPERTIES OF PLASTICIZED MATERIALS\u003cbr\u003e10.1 Mechanical properties\u003cbr\u003e10.1.1 Tensile strength \u003cbr\u003e10.1.2 Elongation\u003cbr\u003e10.1.3 Hardness\u003cbr\u003e10.1.4 Toughness, stiffness, ductility, modulus \u003cbr\u003e10.1.5 Other mechanical properties \u003cbr\u003e10.2 Optical properties \u003cbr\u003e10.3 Spectral properties \u003cbr\u003e10.4 Gloss \u003cbr\u003e10.5 Sound \u003cbr\u003e10.6 Rheological properties \u003cbr\u003eJuan Carlos Garcia, and Antonio Francisco Marcilla \u003cbr\u003e10.6.1 Torque measurement in mixers \u003cbr\u003e10.6.2 Capillary viscometers \u003cbr\u003e10.6.3 Dynamic experiments \u003cbr\u003e10.6.4 Rheology of PVC plastisols \u003cbr\u003e10.7 Magnetorheological properties \u003cbr\u003e10.8 Electrical properties \u003cbr\u003e10.9 Influence of plasticizers on the glass transition temperature of polymers \u003cbr\u003eValery Yu Senichev and Vasiliy V Tereshatov \u003cbr\u003e10.10 Flammability and smoke formation in the presence of plasticizers \u003cbr\u003e10.11 Thermal degradation \u003cbr\u003e10.11.1 Thermal degradation of plasticizer \u003cbr\u003e10.11.2 Effect of polymer degradation products on plasticizers \u003cbr\u003e10.11.3 Effect of plasticizer degradation products on polymer degradation\u003cbr\u003e10.11.4 Loss of plasticizer from material due to the chemical decomposition reactions and evaporation \u003cbr\u003e10.11.5 Effect of plasticizers on the thermal degradation of material \u003cbr\u003e10.12 Effect of UV and ionized radiation on plasticized materials\u003cbr\u003e10.13 Hydrolysis \u003cbr\u003e10.14 Biodegradation in the presence of plasticizers \u003cbr\u003e10.15 Crystallization, structure, and orientation of macromolecules \u003cbr\u003e10.16 Morphology\u003cbr\u003e10.17 Plasticizer effect on contact with other materials \u003cbr\u003e10.18 Influence of plasticizers on swelling of crosslinked elastomers \u003cbr\u003eVasiliy V. Tereshatov, Valery Yu. Senichev \u003cbr\u003e10.18.1 Change of elastic properties of elastomers on swelling in liquids of different polarity \u003cbr\u003e10.18.2 Influence of swelling on viscoelastic properties of crosslinked amorphous elastomers\u003cbr\u003e10.18.3 Influence of swelling on tensile strength and critical strain of elastic materials \u003cbr\u003e10.19 The swelling of nano-heterogenous coatings in plasticizers \u003cbr\u003eVasiliy V.Tereshatov, Valery Yu. Senichev, Marina A. Makarova \u003cbr\u003e10.20 Peculiarities of plasticization of polyurethanes by binary plasticizers \u003cbr\u003eVasiliy V. Tereshatov, Valery Yu. Senichev, Vladimir N. Strel'nikov, \u003cbr\u003eElsa N. Tereshatova, Marina A. Makarova \u003cbr\u003e10.21 Self-healing \u003cbr\u003e10.22 Shrinkage\u003cbr\u003e10.23 Soiling \u003cbr\u003e10.24 Free volume \u003cbr\u003e10.25 Effect of plasticizers on other properties \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e11 PLASTICIZERS USE AND SELECTION FOR SPECIFIC POLYMERS\u003cbr\u003e11.1 ABS \u003cbr\u003e11.2 Acrylics \u003cbr\u003e11.3 Bromobutyl rubber \u003cbr\u003e11.4 Butyl terpolymer\u003cbr\u003e11.5 Cellulose acetate \u003cbr\u003e11.6 Cellulose butyrates and propionates \u003cbr\u003e11.7 Cellulose nitrate \u003cbr\u003e11.8 Chitosan\u003cbr\u003e11.9 Chlorinated polyvinyl chloride \u003cbr\u003e11.10 Chlorosulfonated polyethylene \u003cbr\u003e11.11 Copolymers \u003cbr\u003e11.12 Cyanoacrylates \u003cbr\u003e11.13 Ethylcellulose\u003cbr\u003e11.14 Ethylene-propylene-diene copolymer, EPDM \u003cbr\u003e11.15 Epoxy resin \u003cbr\u003e11.16 Ethylene-vinyl acetate copolymer, EVA \u003cbr\u003e11.17 Ionomers \u003cbr\u003e11.18 Nitrile rubber\u003cbr\u003e11.19 Perfluoropolymers \u003cbr\u003e11.20 Polyacrylonitrile\u003cbr\u003e11.21 Polyamide\u003cbr\u003e11.22 Polyamine \u003cbr\u003e11.23 Polyaniline \u003cbr\u003e11.24 Polybutadiene\u003cbr\u003e11.25 Polybutylene \u003cbr\u003e11.26 Poly(butyl methacrylate)\u003cbr\u003e11.27 Polycarbonate \u003cbr\u003e11.28 Polyester \u003cbr\u003e11.29 Polyetherimide \u003cbr\u003e11.30 Polyethylacrylate \u003cbr\u003e11.31 Polyethylene \u003cbr\u003e11.32 Poly(ethylene oxide) \u003cbr\u003e11.33 Poly(3-hydroxybutyrate) \u003cbr\u003e11.34 Polyisobutylene\u003cbr\u003e11.35 Polyisoprene \u003cbr\u003e11.36 Polyimide \u003cbr\u003e11.37 Polylactide\u003cbr\u003e11.38 Polymethylmethacrylate \u003cbr\u003e11.39 Polypropylene \u003cbr\u003e11.40 Poly(propylene carbonate) \u003cbr\u003e11.41 Poly(N-vinylcarbazole) \u003cbr\u003e11.42 Poly(N-vinylpyrrolidone) \u003cbr\u003e11.43 Poly(phenylene ether) \u003cbr\u003e11.44 Poly(phenylene sulfide) \u003cbr\u003e11.45 Polystyrene \u003cbr\u003e11.46 Polysulfide \u003cbr\u003e11.47 Polysulfone \u003cbr\u003e11.48 Polyurethanes\u003cbr\u003eVasiliy Tereshatov V., Valery Senichev Yu., Elsa Tereshatova N., Marina Makarova A. \u003cbr\u003e11.49 Polyvinylacetate\u003cbr\u003e11.50 Polyvinylalcohol \u003cbr\u003e11.51 Polyvinylbutyral \u003cbr\u003e11.52 Polyvinylchloride \u003cbr\u003e11.53 Polyvinyl fluoride \u003cbr\u003e11.54 Polyvinylidenefluoride \u003cbr\u003e11.55 Polyvinylidenechloride \u003cbr\u003e11.56 Proteins \u003cbr\u003e11.57 Rubber, natural\u003cbr\u003e11.58 Silicone\u003cbr\u003e11.59 Styrene-butadiene rubber \u003cbr\u003e11.60 Styrene-butadiene-styrene rubber \u003cbr\u003e11.61 Starch \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e12 PLASTICIZERS IN POLYMER BLENDS \u003cbr\u003e12.1 Plasticizer partition between component polymers \u003cbr\u003e12.2 Interaction of plasticizers with blend components \u003cbr\u003e12.3 Effect of plasticizers on blend properties \u003cbr\u003e12.4 Blending to reduce or to replace plasticizers \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e13 PLASTICIZERS IN VARIOUS INDUSTRIAL PRODUCTS\u003cbr\u003e13.1 Adhesives and sealants \u003cbr\u003e13.2 Aerospace \u003cbr\u003e13.3 Agriculture \u003cbr\u003e13.4 Automotive applications \u003cbr\u003e13.5 Cementitious materials \u003cbr\u003e13.6 Coated fabrics \u003cbr\u003e13.7 Composites \u003cbr\u003e13.8 Cosmetics\u003cbr\u003e13.9 Cultural heritage\u003cbr\u003e13.10 Dental materials \u003cbr\u003e13.11 Electrical and electronics \u003cbr\u003e13.12 Fibers\u003cbr\u003e13.13 Film \u003cbr\u003e13.14 Food \u003cbr\u003e13.15 Flooring \u003cbr\u003e13.16 Foams\u003cbr\u003e13.17 Footwear \u003cbr\u003e13.18 Fuel cells \u003cbr\u003e13.19 Gaskets\u003cbr\u003e13.20 Household products \u003cbr\u003e13.21 Inks, varnishes, and lacquers \u003cbr\u003e13.22 Medical applications \u003cbr\u003e13.23 Membranes \u003cbr\u003e13.24 Microspheres \u003cbr\u003e13.25 Paints and coatings \u003cbr\u003e13.26 Pharmaceutical products \u003cbr\u003e13.27 Photographic materials\u003cbr\u003e13.28 es \u003cbr\u003e13.29 Roofing materials \u003cbr\u003e13.30 Tires\u003cbr\u003e13.31 Toys \u003cbr\u003eA. Marcilla\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJ.C. García","published_at":"2017-06-22T21:12:37-04:00","created_at":"2017-06-22T21:12:37-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2012","abiotic","adipates","adsorption","alkyl sulfonates","azelates","benzoates","biodegradation","book","chlorinated paraffins","citrates","coated fabrics","cosmetics","database","degradation","dental materials","electrical","electronics","energetic plasticizers","environment","epoxides","eye protection","fibers","film","flooring","foams","food","footwear","gaskets","gloves","inks","medical applications","membranes","p-additives","paints","pharmaceutical products","plasticisers","plasticizers additives","polymer","releases","solubility","varnishes","volatilization","water"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378305028,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Plasticizers, 2nd Edition","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-50-8","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-50-8.jpg?v=1499470955"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-50-8.jpg?v=1499470955","options":["Title"],"media":[{"alt":null,"id":356335190109,"position":1,"preview_image":{"aspect_ratio":0.776,"height":499,"width":387,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-50-8.jpg?v=1499470955"},"aspect_ratio":0.776,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-50-8.jpg?v=1499470955","width":387}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: George Wypych Editor \u003cbr\u003eISBN 978-1-895198-50-8 \u003cbr\u003e\u003cbr\u003ePages 748, Tables 114, Figures 416, References 3876\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book contains the comprehensive review of information available in open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The book contains information from the most recent sources and updated information from the previous edition. \u003cbr\u003e\u003cbr\u003eThe information available today permits to use plasticizers more effectively and to avoid certain plasticizers in applications where they may cause health or material durability problems. Plasticizer incorporation demands a broad background of information because plasticizers are now added to complex mixtures containing the variety of materials which may have different reactions to the presence of plasticizers. Plasticizer's choice is also not simple because there is a large selection of commercial plasticizers and various environmental issues dictating preferred solutions.\u003cbr\u003e\u003cbr\u003eBoth aspects considered indicate the need for a comprehensive source which, using currently available means of the computerized database should provide data and a broad background of theoretical information in the condensed form easy to search. \u003cbr\u003e\u003cbr\u003eAll numerical data are in the form of database (see information on Plasticizer Database which is a separate publication), whereas the theoretical component of information is given in the traditional form of a printed book.\u003cbr\u003e\u003cbr\u003eTwenty one chapters are included in Handbook of Plasticizers. Full Table of Contents is also available for review. Only some chapters are discussed here to add more information which may not be obvious from the table of contents.\u003cbr\u003e\u003cbr\u003eData are available for a large number of commercial plasticizers. This data is used in Chapter 2 to specify typical properties of plasticizers which belong to one of the groups and also to give ranges of expected properties for a given group.\u003cbr\u003e\u003cbr\u003eChapters 5, 6 and 7 contain new and historical approaches, which explain mechanisms of plasticizers action and their behavior in plasticized systems. This theoretical background helps to understand practical observations and provides guidance to the methods of material improvement. Chapter 9 shows plasticization steps and results of various analytical studies which help in understanding these steps and parameters which may control them.\u003cbr\u003e\u003cbr\u003eTwenty five Sections of Chapter 10 discuss plasticizers effect on physical and mechanical properties of plasticized materials. These sections are essential for understanding the behavior of materials and principles of their formulation. \u003cbr\u003e\u003cbr\u003eChapter 11 contains data on the use of plasticizers in 61 groups of polymers. The information is grouped under the following sections – Frequently used plasticizers, Practical concentrations, Main functions performed by plasticizers, Mechanism of plasticizer action, Effect of plasticizers on polymer and other additives, and Typical formulations. Use of such consistent method of data presentation helps to find information quickly and to compare data from various sources and applications. \u003cbr\u003e\u003cbr\u003eSimilar, Chapter 13 discusses the use of plasticizers in 34 groups of products according to a similar breakdown including Plasticizer types, Plasticizer concentration, Reasons for plasticizer use, Advantages and disadvantages of plasticizers use, Effect of plasticizers on product properties, and Examples of formulations. Both chapters make use of a large number of patents and information in open literature discussing the most current findings and trends.\u003cbr\u003e\u003cbr\u003eIn Chapter 14 attempts are being made to discuss the following topics: Effect of plasticizers on process conditions, Processing defects formation and elimination with use of plasticizers, Influence of rheological changes on the process, Equipment maintenance, and Energy consumption. This chapter discusses 15 methods of polymer and rubber processing.\u003cbr\u003e\u003cbr\u003eSeveral chapters which follow discuss various aspects of plasticizer effect on health, safety, and environment. Chapter 17 contains opinions of renowned experts on various aspects of plasticizers effect on health and safety. Chapter 18 contains information on plasticizers persistence in soil and water. Plasticizers releases and their presence in the environment are discussed for many important commercial plasticizers.\u003cbr\u003e\u003cbr\u003eThis short review and the Table of Contents show that this book is the most comprehensive source of current information on plasticizers. Plasticizers are used in so many products that every library should have this reference source of information on plasticizers readily available for its readers. Especially considering that so many aspects of application plasticizers have recently changed that older books cannot provide right answers. This book should be used in conjunction with Plasticizer Database which gives information on the present status and properties of industrial and research plasticizers.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION \u003cbr\u003e1.1 Historical developments \u003cbr\u003e1.2 Expectations from plasticizers\u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e2 PLASTICIZER TYPES \u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Characteristic properties of industrial plasticizers \u003cbr\u003e2.2.1 Abietates \u003cbr\u003e2.2.2 Adipates \u003cbr\u003e2.2.3 Alkyl sulfonates \u003cbr\u003e2.2.4 Amides and amines \u003cbr\u003e2.2.5 Azelates\u003cbr\u003e2.2.6 Benzoates\u003cbr\u003e2.2.7 Bioplasticizers \u003cbr\u003e2.2.8 Biodegradable plasticizers \u003cbr\u003e2.2.9 Chlorinated paraffins \u003cbr\u003e2.2.10 Citrates \u003cbr\u003e2.2.11 Cycloxehane dicarboxylate \u003cbr\u003e2.2.12 Cyclohexane dicarboxylic acid, diisononyl ester \u003cbr\u003eMax Kron \u003cbr\u003e2.2.13 Energetic plasticizers\u003cbr\u003e2.2.14 Epoxides\u003cbr\u003e2.2.15 Esters of C10-30 dicarboxylic acids \u003cbr\u003e2.2.16 Ether-ester plasticizers \u003cbr\u003e2.2.17 Glutarates\u003cbr\u003e2.2.18 Hydrocarbon oils \u003cbr\u003e2.2.19 Isobutyrates\u003cbr\u003e2.2.20 Maleates \u003cbr\u003e2.2.21 Oleates \u003cbr\u003e2.2.22 Pentaerythritol derivatives \u003cbr\u003e2.2.23 Phosphates \u003cbr\u003e2.2.24 Phthalate-free plasticizers \u003cbr\u003e2.2.25 Phthalates \u003cbr\u003e2.2.26 Polymeric plasticizers \u003cbr\u003e2.2.27 Ricinoleates \u003cbr\u003e2.2.28 Sebacates \u003cbr\u003e2.2.29 Sulfonamides \u003cbr\u003e2.2.30 Superplasticizers and plasticizers for concrete\u003cbr\u003e2.2.31 Tri- and pyromellitates \u003cbr\u003e2.2.32 Other plasticizers \u003cbr\u003e2.3 Methods of synthesis and their effect on properties of plasticizers\u003cbr\u003e2.4 Reactive plasticizers and internal \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e3 TYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS\u003cbr\u003e3.1 Abbreviations, terminology, and vocabulary\u003cbr\u003e3.2 Acid number \u003cbr\u003e3.3 Aging studies \u003cbr\u003e3.4 Ash \u003cbr\u003e3.5 Brittleness temperature \u003cbr\u003e3.6 Brookfield viscosity \u003cbr\u003e3.7 Chemical resistance \u003cbr\u003e3.8 Color \u003cbr\u003e3.9 Compatibility \u003cbr\u003e3.10 Compression set \u003cbr\u003e3.11 Concrete additives \u003cbr\u003e3.12 Electrical properties \u003cbr\u003e3.13 Extractable matter \u003cbr\u003e3.14 Flash and fire point \u003cbr\u003e3.15 Fogging\u003cbr\u003e3.16 Fusion\u003cbr\u003e3.17 Gas chromatography\u003cbr\u003e3.18 Hardness \u003cbr\u003e3.19 Infrared analysis of plasticizers \u003cbr\u003e3.20 Kinematic viscosity \u003cbr\u003e3.21 Marking (classification) \u003cbr\u003e3.22 Melt rheology\u003cbr\u003e3.23 Migration \u003cbr\u003e3.24 Poly(vinyl chloride) – standard specification \u003cbr\u003e3.25 Powder-mix time\u003cbr\u003e3.26 Purity\u003cbr\u003e3.27 Refractive index\u003cbr\u003e3.28 Residual contamination \u003cbr\u003e3.29 Sampling \u003cbr\u003e3.30 Saponification value\u003cbr\u003e3.31 Saybolt viscosity\u003cbr\u003e3.32 Sorption of plasticizer\u003cbr\u003e3.33 Specific gravity \u003cbr\u003e3.34 Specification\u003cbr\u003e3.35 Staining \u003cbr\u003e3.36 Stiffness\u003cbr\u003e3.37 Tensile properties\u003cbr\u003e3.38 Thermal expansion coefficient \u003cbr\u003e3.39 Unsaponifiable contents \u003cbr\u003e3.40 Viscosity of plastisols and organosols \u003cbr\u003e3.41 Water concentration\u003cbr\u003e3.42 Weight \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e4 TRANSPORTATION AND STORAGE\u003cbr\u003e4.1 Transportation\u003cbr\u003e4.2 Storage \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e5 MECHANISMS OF PLASTICIZERS ACTION\u003cbr\u003eA. Marcilla and M. Beltrán \u003cbr\u003e5.1 Classical theories \u003cbr\u003e5.1.1 The lubricity theory\u003cbr\u003e5.1.2 The gel theory \u003cbr\u003e5.1.3 Moorshead's empirical approach \u003cbr\u003e5.2 The free volume theory \u003cbr\u003e5.2.1 Mathematical models \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e6 THEORIES OF COMPATIBILITY\u003cbr\u003eValery Yu. Senichev and Vasiliy V. Tereshatov \u003cbr\u003e6.1 Compatibility concepts \u003cbr\u003e6.1.1 Thermodynamic treatment \u003cbr\u003e6.1.2 Interaction parameter\u003cbr\u003e6.1.3 Effect of chemical structure of plasticizers and matrix \u003cbr\u003e6.2 Solubility parameter and the cohesive energy density \u003cbr\u003e6.2.1 Solubility parameter concept \u003cbr\u003e6.2.2 Experimental evaluation of solubility parameters of plasticizers \u003cbr\u003e6.2.3 Methods of experimental evaluation and calculation of solubility parameters of polymers \u003cbr\u003e6.2.4 The methods of calculation of solubility parameters \u003cbr\u003e6.2.5 Multi-dimensional approaches \u003cbr\u003e6.3 Methods of plasticizer selection based on principles of compatibility\u003cbr\u003e6.3.1 How much plasticizer is necessary for a polymer composition? \u003cbr\u003e6.3.2 Initial experimental estimation of compatibility \u003cbr\u003e6.3.3 Thermodynamic compatibility \u003cbr\u003e6.4 Practical approaches in using theory of compatibility for plasticizers selection \u003cbr\u003e6.5 Experimental data illustrating effect of compatibility on plasticized systems \u003cbr\u003e6.5.1 Influence of compatibility on the physical stability of the plasticized polymer\u003cbr\u003e6.5.2 Influence of compatibility on viscosity of the plasticized composition\u003cbr\u003e6.5.3 Influence of compatibility on mechanical properties and physical properties of plasticized polymer\u003cbr\u003e\u003cbr\u003e7 PLASTICIZER MOTION AND DIFFUSION\u003cbr\u003e7.1 Plasticizer diffusion rate and the methods of study\u003cbr\u003e7.2 Plasticizer motion and distribution in matrix \u003cbr\u003e7.3 Plasticizer migration\u003cbr\u003e7.4 Plasticizer distribution of materials in contact \u003cbr\u003eVasiliy V Tereshatov and Valery Yu Senichev\u003cbr\u003e7.5 Antiplasticization \u003cbr\u003e7.6 Effect of diffusion and mobility of plasticizers on their \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e8 EFFECT OF PLASTICIZERS ON OTHER COMPONENTS OF FORMULATION\u003cbr\u003e8.1 Plasticizer consumption by fillers \u003cbr\u003e8.2 Solubility of additives in plasticizers \u003cbr\u003e8.3 Additive molecular mobility and transport in the presence of plasticizers \u003cbr\u003e8.4 Effect of plasticizers on polymerization and curing reactions \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e9 PLASTICIZATION STEPS \u003cbr\u003eA. Marcilla, J. C. García, and M. Beltrán \u003cbr\u003e9.1 Plasticization steps\u003cbr\u003e9.2 Studies of plastisol's behavior during gelation and fusion \u003cbr\u003e9.2.1 Rheological characterization \u003cbr\u003e9.2.2 Studies by scanning electron microscopy \u003cbr\u003e9.2.3 Study of polymer-plasticizer interactions by DSC \u003cbr\u003e9.2.4 Study of polymer-plasticizer interactions by SALS\u003cbr\u003e9.2.5 Study of polymer-plasticizer interactions by FTIR \u003cbr\u003e9.2.6 Study of polymer-plasticizer interactions by \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e10 EFFECT OF PLASTICIZERS ON PROPERTIES OF PLASTICIZED MATERIALS\u003cbr\u003e10.1 Mechanical properties\u003cbr\u003e10.1.1 Tensile strength \u003cbr\u003e10.1.2 Elongation\u003cbr\u003e10.1.3 Hardness\u003cbr\u003e10.1.4 Toughness, stiffness, ductility, modulus \u003cbr\u003e10.1.5 Other mechanical properties \u003cbr\u003e10.2 Optical properties \u003cbr\u003e10.3 Spectral properties \u003cbr\u003e10.4 Gloss \u003cbr\u003e10.5 Sound \u003cbr\u003e10.6 Rheological properties \u003cbr\u003eJuan Carlos Garcia, and Antonio Francisco Marcilla \u003cbr\u003e10.6.1 Torque measurement in mixers \u003cbr\u003e10.6.2 Capillary viscometers \u003cbr\u003e10.6.3 Dynamic experiments \u003cbr\u003e10.6.4 Rheology of PVC plastisols \u003cbr\u003e10.7 Magnetorheological properties \u003cbr\u003e10.8 Electrical properties \u003cbr\u003e10.9 Influence of plasticizers on the glass transition temperature of polymers \u003cbr\u003eValery Yu Senichev and Vasiliy V Tereshatov \u003cbr\u003e10.10 Flammability and smoke formation in the presence of plasticizers \u003cbr\u003e10.11 Thermal degradation \u003cbr\u003e10.11.1 Thermal degradation of plasticizer \u003cbr\u003e10.11.2 Effect of polymer degradation products on plasticizers \u003cbr\u003e10.11.3 Effect of plasticizer degradation products on polymer degradation\u003cbr\u003e10.11.4 Loss of plasticizer from material due to the chemical decomposition reactions and evaporation \u003cbr\u003e10.11.5 Effect of plasticizers on the thermal degradation of material \u003cbr\u003e10.12 Effect of UV and ionized radiation on plasticized materials\u003cbr\u003e10.13 Hydrolysis \u003cbr\u003e10.14 Biodegradation in the presence of plasticizers \u003cbr\u003e10.15 Crystallization, structure, and orientation of macromolecules \u003cbr\u003e10.16 Morphology\u003cbr\u003e10.17 Plasticizer effect on contact with other materials \u003cbr\u003e10.18 Influence of plasticizers on swelling of crosslinked elastomers \u003cbr\u003eVasiliy V. Tereshatov, Valery Yu. Senichev \u003cbr\u003e10.18.1 Change of elastic properties of elastomers on swelling in liquids of different polarity \u003cbr\u003e10.18.2 Influence of swelling on viscoelastic properties of crosslinked amorphous elastomers\u003cbr\u003e10.18.3 Influence of swelling on tensile strength and critical strain of elastic materials \u003cbr\u003e10.19 The swelling of nano-heterogenous coatings in plasticizers \u003cbr\u003eVasiliy V.Tereshatov, Valery Yu. Senichev, Marina A. Makarova \u003cbr\u003e10.20 Peculiarities of plasticization of polyurethanes by binary plasticizers \u003cbr\u003eVasiliy V. Tereshatov, Valery Yu. Senichev, Vladimir N. Strel'nikov, \u003cbr\u003eElsa N. Tereshatova, Marina A. Makarova \u003cbr\u003e10.21 Self-healing \u003cbr\u003e10.22 Shrinkage\u003cbr\u003e10.23 Soiling \u003cbr\u003e10.24 Free volume \u003cbr\u003e10.25 Effect of plasticizers on other properties \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e11 PLASTICIZERS USE AND SELECTION FOR SPECIFIC POLYMERS\u003cbr\u003e11.1 ABS \u003cbr\u003e11.2 Acrylics \u003cbr\u003e11.3 Bromobutyl rubber \u003cbr\u003e11.4 Butyl terpolymer\u003cbr\u003e11.5 Cellulose acetate \u003cbr\u003e11.6 Cellulose butyrates and propionates \u003cbr\u003e11.7 Cellulose nitrate \u003cbr\u003e11.8 Chitosan\u003cbr\u003e11.9 Chlorinated polyvinyl chloride \u003cbr\u003e11.10 Chlorosulfonated polyethylene \u003cbr\u003e11.11 Copolymers \u003cbr\u003e11.12 Cyanoacrylates \u003cbr\u003e11.13 Ethylcellulose\u003cbr\u003e11.14 Ethylene-propylene-diene copolymer, EPDM \u003cbr\u003e11.15 Epoxy resin \u003cbr\u003e11.16 Ethylene-vinyl acetate copolymer, EVA \u003cbr\u003e11.17 Ionomers \u003cbr\u003e11.18 Nitrile rubber\u003cbr\u003e11.19 Perfluoropolymers \u003cbr\u003e11.20 Polyacrylonitrile\u003cbr\u003e11.21 Polyamide\u003cbr\u003e11.22 Polyamine \u003cbr\u003e11.23 Polyaniline \u003cbr\u003e11.24 Polybutadiene\u003cbr\u003e11.25 Polybutylene \u003cbr\u003e11.26 Poly(butyl methacrylate)\u003cbr\u003e11.27 Polycarbonate \u003cbr\u003e11.28 Polyester \u003cbr\u003e11.29 Polyetherimide \u003cbr\u003e11.30 Polyethylacrylate \u003cbr\u003e11.31 Polyethylene \u003cbr\u003e11.32 Poly(ethylene oxide) \u003cbr\u003e11.33 Poly(3-hydroxybutyrate) \u003cbr\u003e11.34 Polyisobutylene\u003cbr\u003e11.35 Polyisoprene \u003cbr\u003e11.36 Polyimide \u003cbr\u003e11.37 Polylactide\u003cbr\u003e11.38 Polymethylmethacrylate \u003cbr\u003e11.39 Polypropylene \u003cbr\u003e11.40 Poly(propylene carbonate) \u003cbr\u003e11.41 Poly(N-vinylcarbazole) \u003cbr\u003e11.42 Poly(N-vinylpyrrolidone) \u003cbr\u003e11.43 Poly(phenylene ether) \u003cbr\u003e11.44 Poly(phenylene sulfide) \u003cbr\u003e11.45 Polystyrene \u003cbr\u003e11.46 Polysulfide \u003cbr\u003e11.47 Polysulfone \u003cbr\u003e11.48 Polyurethanes\u003cbr\u003eVasiliy Tereshatov V., Valery Senichev Yu., Elsa Tereshatova N., Marina Makarova A. \u003cbr\u003e11.49 Polyvinylacetate\u003cbr\u003e11.50 Polyvinylalcohol \u003cbr\u003e11.51 Polyvinylbutyral \u003cbr\u003e11.52 Polyvinylchloride \u003cbr\u003e11.53 Polyvinyl fluoride \u003cbr\u003e11.54 Polyvinylidenefluoride \u003cbr\u003e11.55 Polyvinylidenechloride \u003cbr\u003e11.56 Proteins \u003cbr\u003e11.57 Rubber, natural\u003cbr\u003e11.58 Silicone\u003cbr\u003e11.59 Styrene-butadiene rubber \u003cbr\u003e11.60 Styrene-butadiene-styrene rubber \u003cbr\u003e11.61 Starch \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e12 PLASTICIZERS IN POLYMER BLENDS \u003cbr\u003e12.1 Plasticizer partition between component polymers \u003cbr\u003e12.2 Interaction of plasticizers with blend components \u003cbr\u003e12.3 Effect of plasticizers on blend properties \u003cbr\u003e12.4 Blending to reduce or to replace plasticizers \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e13 PLASTICIZERS IN VARIOUS INDUSTRIAL PRODUCTS\u003cbr\u003e13.1 Adhesives and sealants \u003cbr\u003e13.2 Aerospace \u003cbr\u003e13.3 Agriculture \u003cbr\u003e13.4 Automotive applications \u003cbr\u003e13.5 Cementitious materials \u003cbr\u003e13.6 Coated fabrics \u003cbr\u003e13.7 Composites \u003cbr\u003e13.8 Cosmetics\u003cbr\u003e13.9 Cultural heritage\u003cbr\u003e13.10 Dental materials \u003cbr\u003e13.11 Electrical and electronics \u003cbr\u003e13.12 Fibers\u003cbr\u003e13.13 Film \u003cbr\u003e13.14 Food \u003cbr\u003e13.15 Flooring \u003cbr\u003e13.16 Foams\u003cbr\u003e13.17 Footwear \u003cbr\u003e13.18 Fuel cells \u003cbr\u003e13.19 Gaskets\u003cbr\u003e13.20 Household products \u003cbr\u003e13.21 Inks, varnishes, and lacquers \u003cbr\u003e13.22 Medical applications \u003cbr\u003e13.23 Membranes \u003cbr\u003e13.24 Microspheres \u003cbr\u003e13.25 Paints and coatings \u003cbr\u003e13.26 Pharmaceutical products \u003cbr\u003e13.27 Photographic materials\u003cbr\u003e13.28 es \u003cbr\u003e13.29 Roofing materials \u003cbr\u003e13.30 Tires\u003cbr\u003e13.31 Toys \u003cbr\u003eA. Marcilla\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJ.C. García"}
Description Editor: George Wypych ISBN 978-1-895198-97-3 (hard copy)Published: March 2017 Pages 858+xiiTables 122, Figures 373 Summary This book contains a comprehensive review of information available in the open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The book contains information from the most recent sources and updated information from...
$350.00
in stock
{"id":11427318148,"title":"Handbook of Plasticizers, 3rd Edition","handle":"handbook-of-plasticizers-3rd-edition","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eEditor: George Wypych \u003cbr\u003eISBN 978-1-895198-97-3 (hard copy)\u003cbr\u003e\u003cbr\u003ePublished: March 2017 \u003cbr\u003ePages 858+xii\u003cbr\u003eTables 122, Figures 373\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThis book contains a comprehensive review of information available in the open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The book contains information from the most recent sources and updated information from the previous editions. \u003cbr\u003eThe information available today permits to use plasticizers more effectively and to avoid certain plasticizers in applications where they may cause health or material durability problems. The source of raw materials used for the production of plasticizers is becoming one of the issues in the selection of plasticizers. The book contains information on plasticizers obtained from renewable resources. Plasticizer incorporation demands a broad background of information because plasticizers are now added to complex mixtures containing a variety of materials which may have different reactions to the presence of plasticizers. Plasticizer's choice is also not simple because there is a large selection of commercial plasticizers and various environmental issues dictating preferred solutions.\u003cbr\u003e \u003cbr\u003eBoth aspects considered indicate the need for a comprehensive source which, using currently available means of the computerized database should provide data and a broad background of theoretical information in the condensed form easy to search. \u003cbr\u003e \u003cbr\u003eNumerical data on the most important plasticizers are provided in the tabular form of a printed book, entitled \u003cstrong\u003eDatabook of Plasticizers\u003c\/strong\u003e.\u003c\/p\u003e\nTwenty one chapters are included in Handbook of Plasticizers. Full Table of Contents is also available for review. Only some chapters are discussed here to add more information which may not be obvious from the table of contents.\u003cbr\u003e \u003cbr\u003eData are available for a large number of commercial plasticizers. This data is used in Chapter 2 to specify typical properties of plasticizers which belong to one of the thirty-one groups. The ranges of expected properties for a given group are also given.\u003cbr\u003e \u003cbr\u003eChapters 5, 6 and 7 contain new and historical approaches, which explain mechanisms of plasticizers action and their behavior in plasticized systems. This theoretical background helps to understand practical observations and provides guidance to the methods of material improvement. Chapter 9 shows plasticization steps and results of various analytical studies which help in understanding these steps and parameters which may control them.\u003cbr\u003e \u003cbr\u003eTwenty-eight sections of Chapter 10 discuss plasticizers’ effect on physical and mechanical properties of plasticized materials. These sections are essential for understanding the behavior of materials and principles of their formulation.\n\u003cp\u003eChapter 11 contains data on the use of plasticizers in 61 groups of polymers. The information is grouped under the following sections – Frequently used plasticizers, Practical concentrations, Main functions performed by plasticizers, Mechanism of plasticizer action, Effect of plasticizers on polymer and other additives and Typical formulations. Use of such consistent method of data presentation helps to find information quickly and to compare data from various sources and applications. \u003cbr\u003e \u003cbr\u003eSimilar, Chapter 13 discusses the use of plasticizers in 33 groups of products according to a similar breakdown including Plasticizer types, Plasticizer concentration, Reasons for plasticizer use, Advantages and disadvantages of plasticizers use, Effect of plasticizers on product properties, and Examples of formulations. Both chapters make use of a large number of patents and information in open literature discussing the most current findings and trends.\u003cbr\u003e \u003cbr\u003eIn Chapter 14 attempts are being made to discuss the following topics: Effect of plasticizers on process conditions, Processing defects formation and elimination with use of plasticizers, Influence of rheological changes on the process, Equipment maintenance, and Energy consumption. This chapter discusses 15 methods of polymer and rubber processing.\u003cbr\u003eSeveral chapters which follow discuss various aspects of plasticizer effect on health, safety, and environment. Chapter 17 contains opinions of renowned experts on various aspects of plasticizers effect on health and safety. Chapter 18 contains information on plasticizers persistence in soil and water. Plasticizers releases and their presence in the environment are discussed for many important commercial plasticizers.\u003cbr\u003e \u003cbr\u003eThis short review and the Table of Contents show that this book is the most comprehensive source of current information on plasticizers. Plasticizers are used in so many products that every library should have this reference source of information on plasticizers readily available for its readers. Especially considering that so many aspects of application plasticizers have recently changed that older books cannot provide right answers. This book should be used in conjunction with \u003cstrong\u003ePlasticizer Database\u003c\/strong\u003e and\/or \u003cstrong\u003eDatabook of Plasticizers\u003c\/strong\u003e which gives information on the present status and properties of industrial and research plasticizers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEditor\u003c\/strong\u003e\u003cbr\u003eGeorge Wypych studied chemical engineering and obtained Ph. D. in chemical engineering. The professional expertise includes both university teaching (full professor) and research \u0026amp;development. He has published 25 books (PVC Plastisols, University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, and 4th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, 1st and 2nd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st and 2nd Editions, ChemTec Publishing, The PVC Formulary, 1st and 2nd Editions, ChemTec Publishing), Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of Polymers, 1st and 2nd Editions, ChemTec Publishing, Atlas of Material Damage, 1st and 2nd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st and 2nd Editions, ChemTec Publishing), Databook of Solvents, ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents, ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing, 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability and the development of sealants and coatings. He is included in Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Publications\u003c\/strong\u003e\u003cbr\u003eDatabook of Plasticizers\u003cbr\u003ePVC Degradation and Stabilization\u003c\/p\u003e\n\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003e1 \u003c\/em\u003e\u003cem\u003eINTRODUCTION \u003c\/em\u003e\u003cbr\u003e1.1 Historical developments \u003cbr\u003e1.2 Expectations from plasticizers\u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2 PLASTICIZER TYPES \u003c\/strong\u003e\u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Characteristic properties of industrial plasticizers \u003cbr\u003e2.2.1 Abietates \u003cbr\u003e2.2.2 Adipates \u003cbr\u003e2.2.3 Alkyl sulfonates \u003cbr\u003e2.2.4 Amides and amines \u003cbr\u003e2.2.5 Azelates\u003cbr\u003e2.2.6 Benzoates\u003cbr\u003e2.2.7 Bioplasticizers \u003cbr\u003e2.2.8 Biodegradable plasticizers \u003cbr\u003e2.2.9 Chlorinated paraffins \u003cbr\u003e2.2.10 Citrates \u003cbr\u003e2.2.11 Cycloxehane dicarboxylate \u003cbr\u003e2.2.12 Cyclohexane dicarboxylic acid, diisononyl ester \u003cbr\u003e \u003cem\u003eMax Kron \u003c\/em\u003e\u003cbr\u003e2.2.13 Energetic plasticizers\u003cbr\u003e2.2.14 Epoxides\u003cbr\u003e2.2.15 Esters of C10-30 dicarboxylic acids \u003cbr\u003e2.2.16 Ether-ester plasticizers \u003cbr\u003e2.2.17 Glutarates\u003cbr\u003e2.2.18 Hydrocarbon oils \u003cbr\u003e2.2.19 Isobutyrates\u003cbr\u003e2.2.20 Maleates \u003cbr\u003e2.2.21 Oleates \u003cbr\u003e2.2.22 Pentaerythritol derivatives \u003cbr\u003e2.2.23 Phosphates \u003cbr\u003e2.2.24 Phthalate-free plasticizers \u003cbr\u003e2.2.25 Phthalates \u003cbr\u003e2.2.26 Polymeric plasticizers \u003cbr\u003e2.2.27 Ricinoleates \u003cbr\u003e2.2.28 Sebacates \u003cbr\u003e2.2.29 Sulfonamides \u003cbr\u003e2.2.30 Superplasticizers and plasticizers for concrete\u003cbr\u003e2.2.31 Tri- and pyromellitates \u003cbr\u003e2.2.32 Other plasticizers \u003cbr\u003e2.3 Methods of synthesis and their effect on properties of plasticizers\u003cbr\u003e2.4 Reactive plasticizers and internal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 TYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS\u003c\/strong\u003e\u003cbr\u003e3.1 Abbreviations, terminology, and vocabulary\u003cbr\u003e3.2 Acid number \u003cbr\u003e3.3 Aging studies \u003cbr\u003e3.4 Ash \u003cbr\u003e3.5 Brittleness temperature \u003cbr\u003e3.6 Brookfield viscosity \u003cbr\u003e3.7 Chemical resistance \u003cbr\u003e3.8 Color \u003cbr\u003e3.9 Compatibility \u003cbr\u003e3.10 Compression set \u003cbr\u003e3.11 Concrete additives \u003cbr\u003e3.12 Electrical properties \u003cbr\u003e3.13 Extractable matter \u003cbr\u003e3.14 Flash and fire point \u003cbr\u003e3.15 Fogging\u003cbr\u003e3.16 Fusion\u003cbr\u003e3.17 Gas chromatography\u003cbr\u003e3.18 Hardness \u003cbr\u003e3.19 Infrared analysis of plasticizers \u003cbr\u003e3.20 Kinematic viscosity \u003cbr\u003e3.21 Marking (classification) \u003cbr\u003e3.22 Melt rheology\u003cbr\u003e3.23 Migration \u003cbr\u003e3.24 Poly(vinyl chloride) – standard specification \u003cbr\u003e3.25 Powder-mix time\u003cbr\u003e3.26 Purity\u003cbr\u003e3.27 Refractive index\u003cbr\u003e3.28 Residual contamination \u003cbr\u003e3.29 Sampling \u003cbr\u003e3.30 Saponification value\u003cbr\u003e3.31 Saybolt viscosity\u003cbr\u003e3.32 Sorption of plasticizer\u003cbr\u003e3.33 Specific gravity \u003cbr\u003e3.34 Specification\u003cbr\u003e3.35 Staining \u003cbr\u003e3.36 Stiffness\u003cbr\u003e3.37 Tensile properties\u003cbr\u003e3.38 Thermal expansion coefficient \u003cbr\u003e3.39 Unsaponifiable contents \u003cbr\u003e3.40 Viscosity of plastisols and organosols \u003cbr\u003e3.41 Water concentration\u003cbr\u003e3.42 Weight\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 TRANSPORTATION AND STORAGE\u003c\/strong\u003e\u003cbr\u003e4.1 Transportation\u003cbr\u003e4.2 Storage\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 MECHANISMS OF PLASTICIZERS ACTION\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eA. Marcilla and M. Beltrán \u003c\/em\u003e\u003cbr\u003e5.1 Classical theories \u003cbr\u003e5.1.1 The lubricity theory\u003cbr\u003e5.1.2 The gel theory \u003cbr\u003e5.1.3 Moorshead's empirical approach \u003cbr\u003e5.2 The free volume theory \u003cbr\u003e5.2.1 Mathematical models\u003c\/p\u003e\n\u003cp\u003e6 \u003cstrong\u003eTHEORIES OF COMPATIBILITY\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eValery Yu. Senichev and Vasiliy V. Tereshatov \u003c\/em\u003e\u003cbr\u003e6.1 Compatibility concepts \u003cbr\u003e6.1.1 Thermodynamic treatment \u003cbr\u003e6.1.2 Interaction parameter\u003cbr\u003e6.1.3 Effect of chemical structure of plasticizers and matrix \u003cbr\u003e6.2 Solubility parameter and the cohesive energy density \u003cbr\u003e6.2.1 Solubility parameter concept \u003cbr\u003e6.2.2 Experimental evaluation of solubility parameters of plasticizers \u003cbr\u003e6.2.3 Methods of experimental evaluation and calculation of solubility parameters of polymers \u003cbr\u003e6.2.4 The methods of calculation of solubility parameters \u003cbr\u003e6.2.5 Multi-dimensional approaches \u003cbr\u003e6.3 Methods of plasticizer selection based on principles of compatibility\u003cbr\u003e6.3.1 How much plasticizer is necessary for a polymer composition? \u003cbr\u003e6.3.2 Initial experimental estimation of compatibility \u003cbr\u003e6.3.3 Thermodynamic compatibility \u003cbr\u003e6.4 Practical approaches in using theory of compatibility for plasticizers selection \u003cbr\u003e6.5 Experimental data illustrating effect of compatibility on plasticized systems \u003cbr\u003e6.5.1 Influence of compatibility on the physical stability of the plasticized polymer\u003cbr\u003e6.5.2 Influence of compatibility on viscosity of the plasticized composition\u003cbr\u003e6.5.3 Influence of compatibility on mechanical properties and physical properties of plasticized polymer\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e7 PLASTICIZER MOTION AND DIFFUSION\u003c\/strong\u003e\u003cbr\u003e7.1 Plasticizer diffusion rate and the methods of study\u003cbr\u003e7.2 Plasticizer motion and distribution in matrix \u003cbr\u003e7.3 Plasticizer migration\u003cbr\u003e7.4 Plasticizer distribution in materials in contact \u003cbr\u003e \u003cem\u003eVasiliy V Tereshatov and Valery Yu Senichev\u003c\/em\u003e\u003cbr\u003e7.5 Antiplasticization \u003cbr\u003e7.6 Effect of diffusion and mobility of plasticizers on their\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 EFFECT OF PLASTICIZERS ON OTHER COMPONENTS OF FORMULATION\u003c\/strong\u003e\u003cbr\u003e8.1 Plasticizer consumption by fillers \u003cbr\u003e8.2 Solubility of additives in plasticizers \u003cbr\u003e8.3 Additive molecular mobility and transport in the presence of plasticizers \u003cbr\u003e8.4 Effect of plasticizers on polymerization and curing reactions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e9 PLASTICIZATION STEPS \u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eA. Marcilla, J. C. García and M. Beltrán \u003c\/em\u003e\u003cbr\u003e9.1 Plasticization steps\u003cbr\u003e9.2 Studies of plastisol's behavior during gelation and fusion \u003cbr\u003e9.2.1 Rheological characterization \u003cbr\u003e9.2.2 Studies by scanning electron microscopy \u003cbr\u003e9.2.3 Study of polymer-plasticizer interactions by DSC \u003cbr\u003e9.2.4 Study of polymer-plasticizer interactions by SALS\u003cbr\u003e9.2.5 Study of polymer-plasticizer interactions by FTIR \u003cbr\u003e9.2.6 Study of polymer-plasticizer interactions by\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10 EFFECT OF PLASTICIZERS ON PROPERTIES OF PLASTICIZED MATERIALS\u003c\/strong\u003e\u003cbr\u003e10.1 Mechanical properties\u003cbr\u003e10.1.1 Tensile strength \u003cbr\u003e10.1.2 Elongation\u003cbr\u003e10.1.3 Hardness\u003cbr\u003e10.1.4 Toughness, stiffness, ductility, modulus \u003cbr\u003e10.1.5 Other mechanical properties \u003cbr\u003e10.2 Optical properties \u003cbr\u003e10.3 Spectral properties \u003cbr\u003e10.4 Gloss \u003cbr\u003e10.5 Sound \u003cbr\u003e10.6 Rheological properties \u003cbr\u003e \u003cem\u003eJuan Carlos Garcia, and Antonio Francisco Marcilla \u003c\/em\u003e\u003cbr\u003e10.6.1 Torque measurement in mixers \u003cbr\u003e10.6.2 Capillary viscometers \u003cbr\u003e10.6.3 Dynamic experiments \u003cbr\u003e10.6.4 Rheology of PVC plastisols \u003cbr\u003e10.7 Magnetorheological properties \u003cbr\u003e10.8 Electrical properties \u003cbr\u003e10.9 Influence of plasticizers on the glass transition temperature of polymers \u003cbr\u003e \u003cem\u003eValery Yu Senichev and Vasiliy V Tereshatov \u003c\/em\u003e\u003cbr\u003e10.10 Flammability and smoke formation in the presence of plasticizers \u003cbr\u003e10.11 Thermal degradation \u003cbr\u003e10.11.1 Thermal degradation of plasticizer \u003cbr\u003e10.11.2 Effect of polymer degradation products on plasticizers \u003cbr\u003e10.11.3 Effect of plasticizer degradation products on polymer degradation\u003cbr\u003e10.11.4 Loss of plasticizer from material due to the chemical decomposition reactions and evaporation \u003cbr\u003e10.11.5 Effect of plasticizers on the thermal degradation of material \u003cbr\u003e10.12 Effect of UV and ionized radiation on plasticized materials\u003cbr\u003e10.13 Hydrolysis \u003cbr\u003e10.14 Biodegradation in the presence of plasticizers \u003cbr\u003e10.15 Crystallization, structure, and orientation of macromolecules \u003cbr\u003e10.16 Morphology\u003cbr\u003e10.17 Plasticizer effect on contact with other materials \u003cbr\u003e10.18 Influence of plasticizers on swelling of crosslinked elastomers \u003cbr\u003e \u003cem\u003eVasiliy V. Tereshatov, Valery Yu. Senichev \u003c\/em\u003e\u003cbr\u003e10.18.1 Change of elastic properties of elastomers on swelling in liquids of different polarity \u003cbr\u003e10.18.2 Influence of swelling on viscoelastic properties of crosslinked amorphous elastomers\u003cbr\u003e10.18.3 Influence of swelling on tensile strength and critical strain of elastic materials \u003cbr\u003e10.19 The swelling of nano-heterogenous coatings in plasticizers \u003cbr\u003e \u003cem\u003eVasiliy V.Tereshatov, Valery Yu. Senichev, Marina A. Makarova \u003c\/em\u003e\u003cbr\u003e10.20 Peculiarities of plasticization of polyurethanes by binary plasticizers \u003cbr\u003e \u003cem\u003eVasiliy V. Tereshatov, Valery Yu. Senichev, Vladimir N. Strel'nikov, \u003cbr\u003eElsa N. Tereshatova, Marina A. Makarova\u003c\/em\u003e\u003cbr\u003e10.21 Stability of physico-mechanical properties of plasticized polyetherurethane in a humid medium\u003cbr\u003eM. A. Makarova, V. V. Tereshatov, A. I .Slobodinyuk, V. Yu. Senichev, Zh. A. Vnutskikh\u003cbr\u003e10.22 Fusible diurethane plasticizers for thermoplastic polyurethane composites\u003cbr\u003eV. V. Tereshatov, V. Yu. Senichev\u003cbr\u003e10.23 Determination of osmotic pressure of plasticizer in polymer\u003cbr\u003eV. V. Tereshatov, Zh. A. Vnutskikh, V. Yu. Senichev, A. I. Slobodinyuk\u003cbr\u003e10.24 Self-healing\u003cbr\u003e10.25 Shrinkage\u003cbr\u003e10.26 Soiling \u003cbr\u003e10.27 Free volume \u003cbr\u003e10.28 Effect of plasticizers on other properties\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11 PLASTICIZERS USE AND SELECTION FOR SPECIFIC POLYMERS\u003c\/strong\u003e\u003cbr\u003e11.1 ABS \u003cbr\u003e11.2 Acrylics \u003cbr\u003e11.3 Bromobutyl rubber \u003cbr\u003e11.4 Butyl terpolymer\u003cbr\u003e11.5 Cellulose acetate \u003cbr\u003e11.6 Cellulose butyrates and propionates \u003cbr\u003e11.7 Cellulose nitrate \u003cbr\u003e11.8 Chitosan\u003cbr\u003e11.9 Chlorinated polyvinyl chloride \u003cbr\u003e11.10 Chlorosulfonated polyethylene \u003cbr\u003e11.11 Copolymers \u003cbr\u003e11.12 Cyanoacrylates \u003cbr\u003e11.13 Ethylcellulose\u003cbr\u003e11.14 Ethylene-propylene-diene copolymer, EPDM \u003cbr\u003e11.15 Epoxy resin \u003cbr\u003e11.16 Ethylene-vinyl acetate copolymer, EVA \u003cbr\u003e11.17 Ionomers \u003cbr\u003e11.18 Nitrile rubber\u003cbr\u003e11.19 Perfluoropolymers \u003cbr\u003e11.20 Polyacrylonitrile\u003cbr\u003e11.21 Polyamide\u003cbr\u003e11.22 Polyamine \u003cbr\u003e11.23 Polyaniline \u003cbr\u003e11.24 Polybutadiene\u003cbr\u003e11.25 Polybutylene \u003cbr\u003e11.26 Poly(butyl methacrylate)\u003cbr\u003e11.27 Polycarbonate \u003cbr\u003e11.28 Polyester \u003cbr\u003e11.29 Polyetherimide \u003cbr\u003e11.30 Polyethylacrylate \u003cbr\u003e11.31 Polyethylene \u003cbr\u003e11.32 Poly(ethylene oxide) \u003cbr\u003e11.33 Poly(3-hydroxybutyrate) \u003cbr\u003e11.34 Polyisobutylene\u003cbr\u003e11.35 Polyisoprene \u003cbr\u003e11.36 Polyimide \u003cbr\u003e11.37 Polylactide\u003cbr\u003e11.38 Polymethylmethacrylate \u003cbr\u003e11.39 Polypropylene \u003cbr\u003e11.40 Poly(propylene carbonate) \u003cbr\u003e11.41 Poly(N-vinylcarbazole) \u003cbr\u003e11.42 Poly(N-vinylpyrrolidone) \u003cbr\u003e11.43 Poly(phenylene ether) \u003cbr\u003e11.44 Poly(phenylene sulfide) \u003cbr\u003e11.45 Polystyrene \u003cbr\u003e11.46 Polysulfide \u003cbr\u003e11.47 Polysulfone \u003cbr\u003e11.48 Polyurethanes\u003cbr\u003e \u003cem\u003eVasiliy Tereshatov V., Valery Senichev Yu., Elsa Tereshatova N., Marina Makarova A. \u003c\/em\u003e\u003cbr\u003e11.49 Polyvinylacetate\u003cbr\u003e11.50 Polyvinylalcohol \u003cbr\u003e11.51 Polyvinylbutyral \u003cbr\u003e11.52 Polyvinylchloride \u003cbr\u003e11.53 Polyvinyl fluoride \u003cbr\u003e11.54 Polyvinylidenefluoride \u003cbr\u003e11.55 Polyvinylidenechloride \u003cbr\u003e11.56 Proteins \u003cbr\u003e11.57 Rubber, natural\u003cbr\u003e11.58 Silicone\u003cbr\u003e11.59 Styrene-butadiene rubber \u003cbr\u003e11.60 Styrene-butadiene-styrene rubber \u003cbr\u003e11.61 Starch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12 PLASTICIZERS IN POLYMER BLENDS \u003c\/strong\u003e\u003cbr\u003e12.1 Plasticizer partition between component polymers \u003cbr\u003e12.2 Interaction of plasticizers with blend components \u003cbr\u003e12.3 Effect of plasticizers on blend properties \u003cbr\u003e12.4 Blending to reduce or to replace plasticizers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e13 PLASTICIZERS IN VARIOUS INDUSTRIAL PRODUCTS\u003c\/strong\u003e\u003cbr\u003e13.1 Adhesives and sealants \u003cbr\u003e13.2 Aerospace \u003cbr\u003e13.3 Agriculture \u003cbr\u003e13.4 Automotive applications \u003cbr\u003e13.5 Cementitious materials \u003cbr\u003e13.6 Coated fabrics \u003cbr\u003e13.7 Composites \u003cbr\u003e13.8 Cosmetics\u003cbr\u003e13.9 Cultural heritage\u003cbr\u003e13.10 Dental materials \u003cbr\u003e13.11 Electrical and electronics \u003cbr\u003e13.12 Fibers\u003cbr\u003e13.13 Film \u003cbr\u003e13.14 Food \u003cbr\u003e13.15 Flooring \u003cbr\u003e13.16 Foams\u003cbr\u003e13.17 Footwear \u003cbr\u003e13.18 Fuel cells \u003cbr\u003e13.19 Gaskets\u003cbr\u003e13.20 Household products \u003cbr\u003e13.21 Inks, varnishes, and lacquers \u003cbr\u003e13.22 Medical applications \u003cbr\u003e13.23 Membranes \u003cbr\u003e13.24 Microspheres \u003cbr\u003e13.25 Paints and coatings \u003cbr\u003e13.26 Pharmaceutical products \u003cbr\u003e13.27 Photographic materials\u003cbr\u003e13.28 Pipes \u003cbr\u003e13.29 Roofing materials \u003cbr\u003e13.30 Tires\u003cbr\u003e13.31 Toys \u003cbr\u003e \u003cem\u003eA. Marcilla, J.C. García, and M. Beltran \u003c\/em\u003e\u003cbr\u003e13.32 Tubing \u003cbr\u003e13.33 Wire and cable\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e14 PLASTICIZERS IN VARIOUS PROCESSING METHODS \u003c\/strong\u003e\u003cbr\u003e14.1 Blow molding \u003cbr\u003e14.2 Calendering \u003cbr\u003e14.3 Coil coating \u003cbr\u003e14.4 Compression molding \u003cbr\u003e14.5 Compounding (mixing) \u003cbr\u003e14.6 Dip coating \u003cbr\u003e14.7 Dry blending \u003cbr\u003e14.8 Extrusion \u003cbr\u003e14.9 Injection molding \u003cbr\u003e14.10 Polymer synthesis \u003cbr\u003e14.11 Rotational molding \u003cbr\u003e \u003cem\u003eM. Beltrán, J. C. Garcia, and A. Marcilla \u003c\/em\u003e\u003cbr\u003e14.12 Rubber processing \u003cbr\u003e14.13 Thermoforming \u003cbr\u003e14.14 Web coating \u003cbr\u003e14.15 Wire coating\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15 SPECIALIZED ANALYTICAL METHODS IN PLASTICIZER TESTING\u003c\/strong\u003e\u003cbr\u003e15.1 Plasticizer identification \u003cbr\u003e15.2 Methods of determination of plasticizer concentration \u003cbr\u003e15.3 Determination of volatility, molecular motion, diffusion, and migration \u003cbr\u003e15.4 Methods of study of plasticized materials\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e16 MATHEMATICAL MODELLING IN APPLICATION TO PLASTICIZERS\u003c\/strong\u003e\u003cbr\u003e16.1 PVC-plasticizer interaction model \u003cbr\u003e16.2 Gas permeation\u003cbr\u003e16.3 Migration\u003cbr\u003e16.4 Dry-blending time \u003cbr\u003e16.5 Gelation and fusion \u003cbr\u003e16.6 Thermal decomposition\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e17 HEALTH AND SAFETY ISSUES WITH PLASTICIZERS AND PLASTICIZED MATERIALS \u003c\/strong\u003e\u003cbr\u003e17.1 Adjuvant effect of plasticizers \u003cbr\u003e \u003cem\u003eSøren Thor Larsen\u003c\/em\u003e\u003cbr\u003e17.1.1 Introduction\u003cbr\u003e17.1.2 Airway allergy\u003cbr\u003e17.1.3 Adjuvant effect \u003cbr\u003e17.1.4 Adjuvant effect of phthalate plasticizers? \u003cbr\u003e17.1.5 Conclusions \u003cbr\u003e17.2 The rodent hepatocarcinogenic response to phthalate plasticizers: basic biology and human \u003cbr\u003eextrapolation\u003cbr\u003e \u003cem\u003eClaire Sadler, Ann-Marie Bergholm, Nicola Powles-Glover, and Ruth A Roberts\u003c\/em\u003e\u003cbr\u003e17.2.1 Introduction\u003cbr\u003e17.2.2 Gene expression and cancer toxicology \u003cbr\u003e17.2.2.1 Gene expression\u003cbr\u003e17.2.2.2 Cancer biology: some basic considerations \u003cbr\u003e17.2.2.3 Chemical carcinogenesis \u003cbr\u003e17.2.3 Peroxisome proliferators and rodent nongenotoxic hepatocarcinogenesis \u003cbr\u003e17.2.3.1 The peroxisome proliferators \u003cbr\u003e17.2.3.2 PPARa \u003cbr\u003e17.2.4 Species differences in response to PPS \u003cbr\u003e17.2.5 Chemical regulation \u003cbr\u003e17.2.6 Summary \u003cbr\u003e17.3 The influence of maternal nutrition on phthalate teratogenicity \u003cbr\u003e \u003cem\u003eJanet Y. Uriu-Adams and Carl L. Keen\u003c\/em\u003e\u003cbr\u003e17.3.1 Introduction \u003cbr\u003e17.3.2 Reproductive toxicity of BBP and DEHP\u003cbr\u003e17.3.3 Acute phase response-induced alterations in maternal and conceptus nutrient metabolism \u003cbr\u003e17.3.4 Concluding comments\u003cbr\u003e17.3.5 Acknowledgements \u003cbr\u003e17.4 Public health implications of phthalates: A review of findings from the U.S. National Toxicology Program's Expert Panel Reports\u003cbr\u003e \u003cem\u003eStephanie R. Miles-Richardson\u003c\/em\u003e\u003cbr\u003e17.4.1 Introduction\u003cbr\u003e17.4.2 Exposure to adults in the general population \u003cbr\u003e17.4.3 Exposure of vulnerable sub-populations \u003cbr\u003e17.4.4 Health effects of phthalate exposure \u003cbr\u003e17.4.5 US NTP expert panel conclusions\u003cbr\u003e17.4.6 Public health implications\u003cbr\u003e17.5 Plasticizers in the indoor environment \u003cbr\u003e \u003cem\u003eWerner Butte\u003c\/em\u003e\u003cbr\u003e17.5.1 Introduction \u003cbr\u003e17.5.2 Sources of indoor plasticizers \u003cbr\u003e17.5.3 Occurrence of plasticizers indoors \u003cbr\u003e17.5.4 Impact of plasticizers in the indoor environment \u003cbr\u003e17.5.5 Summary \u003cbr\u003eAddendum \u003cbr\u003e \u003cstrong\u003e18 THE ENVIRONMENTAL FATE OF PLASTICIZERS \u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eWilliam R. Roy\u003c\/em\u003e\u003cbr\u003e18.1 Introduction \u003cbr\u003e18.1.1 Releases to the environment\u003cbr\u003e18.1.2 Levels in the environment\u003cbr\u003e18.2 Plasticizers in water\u003cbr\u003e18.2.1 Solubility \u003cbr\u003e18.2.2 Volatilization from water \u003cbr\u003e18.2.3 Abiotic degradation in water \u003cbr\u003e18.2.4 Biodegradation in water\u003cbr\u003e18.2.5 Adsorption from water\u003cbr\u003e18.3 Soil and sediment \u003cbr\u003e18.3.1 Volatilization \u003cbr\u003e18.3.2 Biodegradation in soil \u003cbr\u003e18.4 Organisms \u003cbr\u003e18.5 Air \u003cbr\u003eSummary and concluding remarks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e19 REGULATIONS AND DATA \u003c\/strong\u003e\u003cbr\u003e19.1 Toxic substance control \u003cbr\u003e19.2. Carcinogenic effect\u003cbr\u003e19.3 Teratogenic and mutagenic effect \u003cbr\u003e19.4 Workplace exposure limits \u003cbr\u003e19.5 Exposure from consumer products \u003cbr\u003e19.6 Plasticizers in drinking water \u003cbr\u003e19.7 Food regulatory acts \u003cbr\u003e19.8 Medical and other applications \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e20 PERSONAL PROTECTION \u003c\/strong\u003e\u003cbr\u003e20.1 Clothing \u003cbr\u003e20.2 Gloves \u003cbr\u003e20.3 Eye protection \u003cbr\u003e20.4 Respiratory protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e21 PLASTICIZER RECOVERY \u0026amp; RECYCLING \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eINDEX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 14 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st and 2nd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives, PVC Degradation \u0026amp; Stabilization, The PVC Formulary (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education.","published_at":"2017-07-13T17:08:39-04:00","created_at":"2017-07-13T17:11:28-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2017","abiotic","adipates","adsorption","alkyl sulfonates","azelates","benzoates","biodegradation","book","chlorinated paraffins","citrates","coated fabrics","cosmetics","database","degradation","dental materials","electrical","electronics","energetic plasticizers","environment","epoxides","eye protection","fibers","film","flooring","foams","food","footwear","gaskets","gloves","inks","medical applications","membranes","p-additives","paints","pharmaceutical products","plasticisers","plasticizers additives","polymer","releases","solubility","varnishes","volatilization","water"],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45225353156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Plasticizers, 3rd Edition","public_title":null,"options":["Default Title"],"price":35000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":"978-1-895198-97-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-97-3.jpg?v=1503344003"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-97-3.jpg?v=1503344003","options":["Title"],"media":[{"alt":null,"id":407379804253,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-97-3.jpg?v=1503344003"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-97-3.jpg?v=1503344003","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eEditor: George Wypych \u003cbr\u003eISBN 978-1-895198-97-3 (hard copy)\u003cbr\u003e\u003cbr\u003ePublished: March 2017 \u003cbr\u003ePages 858+xii\u003cbr\u003eTables 122, Figures 373\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThis book contains a comprehensive review of information available in the open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The book contains information from the most recent sources and updated information from the previous editions. \u003cbr\u003eThe information available today permits to use plasticizers more effectively and to avoid certain plasticizers in applications where they may cause health or material durability problems. The source of raw materials used for the production of plasticizers is becoming one of the issues in the selection of plasticizers. The book contains information on plasticizers obtained from renewable resources. Plasticizer incorporation demands a broad background of information because plasticizers are now added to complex mixtures containing a variety of materials which may have different reactions to the presence of plasticizers. Plasticizer's choice is also not simple because there is a large selection of commercial plasticizers and various environmental issues dictating preferred solutions.\u003cbr\u003e \u003cbr\u003eBoth aspects considered indicate the need for a comprehensive source which, using currently available means of the computerized database should provide data and a broad background of theoretical information in the condensed form easy to search. \u003cbr\u003e \u003cbr\u003eNumerical data on the most important plasticizers are provided in the tabular form of a printed book, entitled \u003cstrong\u003eDatabook of Plasticizers\u003c\/strong\u003e.\u003c\/p\u003e\nTwenty one chapters are included in Handbook of Plasticizers. Full Table of Contents is also available for review. Only some chapters are discussed here to add more information which may not be obvious from the table of contents.\u003cbr\u003e \u003cbr\u003eData are available for a large number of commercial plasticizers. This data is used in Chapter 2 to specify typical properties of plasticizers which belong to one of the thirty-one groups. The ranges of expected properties for a given group are also given.\u003cbr\u003e \u003cbr\u003eChapters 5, 6 and 7 contain new and historical approaches, which explain mechanisms of plasticizers action and their behavior in plasticized systems. This theoretical background helps to understand practical observations and provides guidance to the methods of material improvement. Chapter 9 shows plasticization steps and results of various analytical studies which help in understanding these steps and parameters which may control them.\u003cbr\u003e \u003cbr\u003eTwenty-eight sections of Chapter 10 discuss plasticizers’ effect on physical and mechanical properties of plasticized materials. These sections are essential for understanding the behavior of materials and principles of their formulation.\n\u003cp\u003eChapter 11 contains data on the use of plasticizers in 61 groups of polymers. The information is grouped under the following sections – Frequently used plasticizers, Practical concentrations, Main functions performed by plasticizers, Mechanism of plasticizer action, Effect of plasticizers on polymer and other additives and Typical formulations. Use of such consistent method of data presentation helps to find information quickly and to compare data from various sources and applications. \u003cbr\u003e \u003cbr\u003eSimilar, Chapter 13 discusses the use of plasticizers in 33 groups of products according to a similar breakdown including Plasticizer types, Plasticizer concentration, Reasons for plasticizer use, Advantages and disadvantages of plasticizers use, Effect of plasticizers on product properties, and Examples of formulations. Both chapters make use of a large number of patents and information in open literature discussing the most current findings and trends.\u003cbr\u003e \u003cbr\u003eIn Chapter 14 attempts are being made to discuss the following topics: Effect of plasticizers on process conditions, Processing defects formation and elimination with use of plasticizers, Influence of rheological changes on the process, Equipment maintenance, and Energy consumption. This chapter discusses 15 methods of polymer and rubber processing.\u003cbr\u003eSeveral chapters which follow discuss various aspects of plasticizer effect on health, safety, and environment. Chapter 17 contains opinions of renowned experts on various aspects of plasticizers effect on health and safety. Chapter 18 contains information on plasticizers persistence in soil and water. Plasticizers releases and their presence in the environment are discussed for many important commercial plasticizers.\u003cbr\u003e \u003cbr\u003eThis short review and the Table of Contents show that this book is the most comprehensive source of current information on plasticizers. Plasticizers are used in so many products that every library should have this reference source of information on plasticizers readily available for its readers. Especially considering that so many aspects of application plasticizers have recently changed that older books cannot provide right answers. This book should be used in conjunction with \u003cstrong\u003ePlasticizer Database\u003c\/strong\u003e and\/or \u003cstrong\u003eDatabook of Plasticizers\u003c\/strong\u003e which gives information on the present status and properties of industrial and research plasticizers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEditor\u003c\/strong\u003e\u003cbr\u003eGeorge Wypych studied chemical engineering and obtained Ph. D. in chemical engineering. The professional expertise includes both university teaching (full professor) and research \u0026amp;development. He has published 25 books (PVC Plastisols, University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, and 4th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, 1st and 2nd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st and 2nd Editions, ChemTec Publishing, The PVC Formulary, 1st and 2nd Editions, ChemTec Publishing), Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of Polymers, 1st and 2nd Editions, ChemTec Publishing, Atlas of Material Damage, 1st and 2nd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st and 2nd Editions, ChemTec Publishing), Databook of Solvents, ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents, ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing, 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability and the development of sealants and coatings. He is included in Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Publications\u003c\/strong\u003e\u003cbr\u003eDatabook of Plasticizers\u003cbr\u003ePVC Degradation and Stabilization\u003c\/p\u003e\n\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003e1 \u003c\/em\u003e\u003cem\u003eINTRODUCTION \u003c\/em\u003e\u003cbr\u003e1.1 Historical developments \u003cbr\u003e1.2 Expectations from plasticizers\u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2 PLASTICIZER TYPES \u003c\/strong\u003e\u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Characteristic properties of industrial plasticizers \u003cbr\u003e2.2.1 Abietates \u003cbr\u003e2.2.2 Adipates \u003cbr\u003e2.2.3 Alkyl sulfonates \u003cbr\u003e2.2.4 Amides and amines \u003cbr\u003e2.2.5 Azelates\u003cbr\u003e2.2.6 Benzoates\u003cbr\u003e2.2.7 Bioplasticizers \u003cbr\u003e2.2.8 Biodegradable plasticizers \u003cbr\u003e2.2.9 Chlorinated paraffins \u003cbr\u003e2.2.10 Citrates \u003cbr\u003e2.2.11 Cycloxehane dicarboxylate \u003cbr\u003e2.2.12 Cyclohexane dicarboxylic acid, diisononyl ester \u003cbr\u003e \u003cem\u003eMax Kron \u003c\/em\u003e\u003cbr\u003e2.2.13 Energetic plasticizers\u003cbr\u003e2.2.14 Epoxides\u003cbr\u003e2.2.15 Esters of C10-30 dicarboxylic acids \u003cbr\u003e2.2.16 Ether-ester plasticizers \u003cbr\u003e2.2.17 Glutarates\u003cbr\u003e2.2.18 Hydrocarbon oils \u003cbr\u003e2.2.19 Isobutyrates\u003cbr\u003e2.2.20 Maleates \u003cbr\u003e2.2.21 Oleates \u003cbr\u003e2.2.22 Pentaerythritol derivatives \u003cbr\u003e2.2.23 Phosphates \u003cbr\u003e2.2.24 Phthalate-free plasticizers \u003cbr\u003e2.2.25 Phthalates \u003cbr\u003e2.2.26 Polymeric plasticizers \u003cbr\u003e2.2.27 Ricinoleates \u003cbr\u003e2.2.28 Sebacates \u003cbr\u003e2.2.29 Sulfonamides \u003cbr\u003e2.2.30 Superplasticizers and plasticizers for concrete\u003cbr\u003e2.2.31 Tri- and pyromellitates \u003cbr\u003e2.2.32 Other plasticizers \u003cbr\u003e2.3 Methods of synthesis and their effect on properties of plasticizers\u003cbr\u003e2.4 Reactive plasticizers and internal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 TYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS\u003c\/strong\u003e\u003cbr\u003e3.1 Abbreviations, terminology, and vocabulary\u003cbr\u003e3.2 Acid number \u003cbr\u003e3.3 Aging studies \u003cbr\u003e3.4 Ash \u003cbr\u003e3.5 Brittleness temperature \u003cbr\u003e3.6 Brookfield viscosity \u003cbr\u003e3.7 Chemical resistance \u003cbr\u003e3.8 Color \u003cbr\u003e3.9 Compatibility \u003cbr\u003e3.10 Compression set \u003cbr\u003e3.11 Concrete additives \u003cbr\u003e3.12 Electrical properties \u003cbr\u003e3.13 Extractable matter \u003cbr\u003e3.14 Flash and fire point \u003cbr\u003e3.15 Fogging\u003cbr\u003e3.16 Fusion\u003cbr\u003e3.17 Gas chromatography\u003cbr\u003e3.18 Hardness \u003cbr\u003e3.19 Infrared analysis of plasticizers \u003cbr\u003e3.20 Kinematic viscosity \u003cbr\u003e3.21 Marking (classification) \u003cbr\u003e3.22 Melt rheology\u003cbr\u003e3.23 Migration \u003cbr\u003e3.24 Poly(vinyl chloride) – standard specification \u003cbr\u003e3.25 Powder-mix time\u003cbr\u003e3.26 Purity\u003cbr\u003e3.27 Refractive index\u003cbr\u003e3.28 Residual contamination \u003cbr\u003e3.29 Sampling \u003cbr\u003e3.30 Saponification value\u003cbr\u003e3.31 Saybolt viscosity\u003cbr\u003e3.32 Sorption of plasticizer\u003cbr\u003e3.33 Specific gravity \u003cbr\u003e3.34 Specification\u003cbr\u003e3.35 Staining \u003cbr\u003e3.36 Stiffness\u003cbr\u003e3.37 Tensile properties\u003cbr\u003e3.38 Thermal expansion coefficient \u003cbr\u003e3.39 Unsaponifiable contents \u003cbr\u003e3.40 Viscosity of plastisols and organosols \u003cbr\u003e3.41 Water concentration\u003cbr\u003e3.42 Weight\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 TRANSPORTATION AND STORAGE\u003c\/strong\u003e\u003cbr\u003e4.1 Transportation\u003cbr\u003e4.2 Storage\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5 MECHANISMS OF PLASTICIZERS ACTION\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eA. Marcilla and M. Beltrán \u003c\/em\u003e\u003cbr\u003e5.1 Classical theories \u003cbr\u003e5.1.1 The lubricity theory\u003cbr\u003e5.1.2 The gel theory \u003cbr\u003e5.1.3 Moorshead's empirical approach \u003cbr\u003e5.2 The free volume theory \u003cbr\u003e5.2.1 Mathematical models\u003c\/p\u003e\n\u003cp\u003e6 \u003cstrong\u003eTHEORIES OF COMPATIBILITY\u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eValery Yu. Senichev and Vasiliy V. Tereshatov \u003c\/em\u003e\u003cbr\u003e6.1 Compatibility concepts \u003cbr\u003e6.1.1 Thermodynamic treatment \u003cbr\u003e6.1.2 Interaction parameter\u003cbr\u003e6.1.3 Effect of chemical structure of plasticizers and matrix \u003cbr\u003e6.2 Solubility parameter and the cohesive energy density \u003cbr\u003e6.2.1 Solubility parameter concept \u003cbr\u003e6.2.2 Experimental evaluation of solubility parameters of plasticizers \u003cbr\u003e6.2.3 Methods of experimental evaluation and calculation of solubility parameters of polymers \u003cbr\u003e6.2.4 The methods of calculation of solubility parameters \u003cbr\u003e6.2.5 Multi-dimensional approaches \u003cbr\u003e6.3 Methods of plasticizer selection based on principles of compatibility\u003cbr\u003e6.3.1 How much plasticizer is necessary for a polymer composition? \u003cbr\u003e6.3.2 Initial experimental estimation of compatibility \u003cbr\u003e6.3.3 Thermodynamic compatibility \u003cbr\u003e6.4 Practical approaches in using theory of compatibility for plasticizers selection \u003cbr\u003e6.5 Experimental data illustrating effect of compatibility on plasticized systems \u003cbr\u003e6.5.1 Influence of compatibility on the physical stability of the plasticized polymer\u003cbr\u003e6.5.2 Influence of compatibility on viscosity of the plasticized composition\u003cbr\u003e6.5.3 Influence of compatibility on mechanical properties and physical properties of plasticized polymer\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003e7 PLASTICIZER MOTION AND DIFFUSION\u003c\/strong\u003e\u003cbr\u003e7.1 Plasticizer diffusion rate and the methods of study\u003cbr\u003e7.2 Plasticizer motion and distribution in matrix \u003cbr\u003e7.3 Plasticizer migration\u003cbr\u003e7.4 Plasticizer distribution in materials in contact \u003cbr\u003e \u003cem\u003eVasiliy V Tereshatov and Valery Yu Senichev\u003c\/em\u003e\u003cbr\u003e7.5 Antiplasticization \u003cbr\u003e7.6 Effect of diffusion and mobility of plasticizers on their\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8 EFFECT OF PLASTICIZERS ON OTHER COMPONENTS OF FORMULATION\u003c\/strong\u003e\u003cbr\u003e8.1 Plasticizer consumption by fillers \u003cbr\u003e8.2 Solubility of additives in plasticizers \u003cbr\u003e8.3 Additive molecular mobility and transport in the presence of plasticizers \u003cbr\u003e8.4 Effect of plasticizers on polymerization and curing reactions\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e9 PLASTICIZATION STEPS \u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eA. Marcilla, J. C. García and M. Beltrán \u003c\/em\u003e\u003cbr\u003e9.1 Plasticization steps\u003cbr\u003e9.2 Studies of plastisol's behavior during gelation and fusion \u003cbr\u003e9.2.1 Rheological characterization \u003cbr\u003e9.2.2 Studies by scanning electron microscopy \u003cbr\u003e9.2.3 Study of polymer-plasticizer interactions by DSC \u003cbr\u003e9.2.4 Study of polymer-plasticizer interactions by SALS\u003cbr\u003e9.2.5 Study of polymer-plasticizer interactions by FTIR \u003cbr\u003e9.2.6 Study of polymer-plasticizer interactions by\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10 EFFECT OF PLASTICIZERS ON PROPERTIES OF PLASTICIZED MATERIALS\u003c\/strong\u003e\u003cbr\u003e10.1 Mechanical properties\u003cbr\u003e10.1.1 Tensile strength \u003cbr\u003e10.1.2 Elongation\u003cbr\u003e10.1.3 Hardness\u003cbr\u003e10.1.4 Toughness, stiffness, ductility, modulus \u003cbr\u003e10.1.5 Other mechanical properties \u003cbr\u003e10.2 Optical properties \u003cbr\u003e10.3 Spectral properties \u003cbr\u003e10.4 Gloss \u003cbr\u003e10.5 Sound \u003cbr\u003e10.6 Rheological properties \u003cbr\u003e \u003cem\u003eJuan Carlos Garcia, and Antonio Francisco Marcilla \u003c\/em\u003e\u003cbr\u003e10.6.1 Torque measurement in mixers \u003cbr\u003e10.6.2 Capillary viscometers \u003cbr\u003e10.6.3 Dynamic experiments \u003cbr\u003e10.6.4 Rheology of PVC plastisols \u003cbr\u003e10.7 Magnetorheological properties \u003cbr\u003e10.8 Electrical properties \u003cbr\u003e10.9 Influence of plasticizers on the glass transition temperature of polymers \u003cbr\u003e \u003cem\u003eValery Yu Senichev and Vasiliy V Tereshatov \u003c\/em\u003e\u003cbr\u003e10.10 Flammability and smoke formation in the presence of plasticizers \u003cbr\u003e10.11 Thermal degradation \u003cbr\u003e10.11.1 Thermal degradation of plasticizer \u003cbr\u003e10.11.2 Effect of polymer degradation products on plasticizers \u003cbr\u003e10.11.3 Effect of plasticizer degradation products on polymer degradation\u003cbr\u003e10.11.4 Loss of plasticizer from material due to the chemical decomposition reactions and evaporation \u003cbr\u003e10.11.5 Effect of plasticizers on the thermal degradation of material \u003cbr\u003e10.12 Effect of UV and ionized radiation on plasticized materials\u003cbr\u003e10.13 Hydrolysis \u003cbr\u003e10.14 Biodegradation in the presence of plasticizers \u003cbr\u003e10.15 Crystallization, structure, and orientation of macromolecules \u003cbr\u003e10.16 Morphology\u003cbr\u003e10.17 Plasticizer effect on contact with other materials \u003cbr\u003e10.18 Influence of plasticizers on swelling of crosslinked elastomers \u003cbr\u003e \u003cem\u003eVasiliy V. Tereshatov, Valery Yu. Senichev \u003c\/em\u003e\u003cbr\u003e10.18.1 Change of elastic properties of elastomers on swelling in liquids of different polarity \u003cbr\u003e10.18.2 Influence of swelling on viscoelastic properties of crosslinked amorphous elastomers\u003cbr\u003e10.18.3 Influence of swelling on tensile strength and critical strain of elastic materials \u003cbr\u003e10.19 The swelling of nano-heterogenous coatings in plasticizers \u003cbr\u003e \u003cem\u003eVasiliy V.Tereshatov, Valery Yu. Senichev, Marina A. Makarova \u003c\/em\u003e\u003cbr\u003e10.20 Peculiarities of plasticization of polyurethanes by binary plasticizers \u003cbr\u003e \u003cem\u003eVasiliy V. Tereshatov, Valery Yu. Senichev, Vladimir N. Strel'nikov, \u003cbr\u003eElsa N. Tereshatova, Marina A. Makarova\u003c\/em\u003e\u003cbr\u003e10.21 Stability of physico-mechanical properties of plasticized polyetherurethane in a humid medium\u003cbr\u003eM. A. Makarova, V. V. Tereshatov, A. I .Slobodinyuk, V. Yu. Senichev, Zh. A. Vnutskikh\u003cbr\u003e10.22 Fusible diurethane plasticizers for thermoplastic polyurethane composites\u003cbr\u003eV. V. Tereshatov, V. Yu. Senichev\u003cbr\u003e10.23 Determination of osmotic pressure of plasticizer in polymer\u003cbr\u003eV. V. Tereshatov, Zh. A. Vnutskikh, V. Yu. Senichev, A. I. Slobodinyuk\u003cbr\u003e10.24 Self-healing\u003cbr\u003e10.25 Shrinkage\u003cbr\u003e10.26 Soiling \u003cbr\u003e10.27 Free volume \u003cbr\u003e10.28 Effect of plasticizers on other properties\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11 PLASTICIZERS USE AND SELECTION FOR SPECIFIC POLYMERS\u003c\/strong\u003e\u003cbr\u003e11.1 ABS \u003cbr\u003e11.2 Acrylics \u003cbr\u003e11.3 Bromobutyl rubber \u003cbr\u003e11.4 Butyl terpolymer\u003cbr\u003e11.5 Cellulose acetate \u003cbr\u003e11.6 Cellulose butyrates and propionates \u003cbr\u003e11.7 Cellulose nitrate \u003cbr\u003e11.8 Chitosan\u003cbr\u003e11.9 Chlorinated polyvinyl chloride \u003cbr\u003e11.10 Chlorosulfonated polyethylene \u003cbr\u003e11.11 Copolymers \u003cbr\u003e11.12 Cyanoacrylates \u003cbr\u003e11.13 Ethylcellulose\u003cbr\u003e11.14 Ethylene-propylene-diene copolymer, EPDM \u003cbr\u003e11.15 Epoxy resin \u003cbr\u003e11.16 Ethylene-vinyl acetate copolymer, EVA \u003cbr\u003e11.17 Ionomers \u003cbr\u003e11.18 Nitrile rubber\u003cbr\u003e11.19 Perfluoropolymers \u003cbr\u003e11.20 Polyacrylonitrile\u003cbr\u003e11.21 Polyamide\u003cbr\u003e11.22 Polyamine \u003cbr\u003e11.23 Polyaniline \u003cbr\u003e11.24 Polybutadiene\u003cbr\u003e11.25 Polybutylene \u003cbr\u003e11.26 Poly(butyl methacrylate)\u003cbr\u003e11.27 Polycarbonate \u003cbr\u003e11.28 Polyester \u003cbr\u003e11.29 Polyetherimide \u003cbr\u003e11.30 Polyethylacrylate \u003cbr\u003e11.31 Polyethylene \u003cbr\u003e11.32 Poly(ethylene oxide) \u003cbr\u003e11.33 Poly(3-hydroxybutyrate) \u003cbr\u003e11.34 Polyisobutylene\u003cbr\u003e11.35 Polyisoprene \u003cbr\u003e11.36 Polyimide \u003cbr\u003e11.37 Polylactide\u003cbr\u003e11.38 Polymethylmethacrylate \u003cbr\u003e11.39 Polypropylene \u003cbr\u003e11.40 Poly(propylene carbonate) \u003cbr\u003e11.41 Poly(N-vinylcarbazole) \u003cbr\u003e11.42 Poly(N-vinylpyrrolidone) \u003cbr\u003e11.43 Poly(phenylene ether) \u003cbr\u003e11.44 Poly(phenylene sulfide) \u003cbr\u003e11.45 Polystyrene \u003cbr\u003e11.46 Polysulfide \u003cbr\u003e11.47 Polysulfone \u003cbr\u003e11.48 Polyurethanes\u003cbr\u003e \u003cem\u003eVasiliy Tereshatov V., Valery Senichev Yu., Elsa Tereshatova N., Marina Makarova A. \u003c\/em\u003e\u003cbr\u003e11.49 Polyvinylacetate\u003cbr\u003e11.50 Polyvinylalcohol \u003cbr\u003e11.51 Polyvinylbutyral \u003cbr\u003e11.52 Polyvinylchloride \u003cbr\u003e11.53 Polyvinyl fluoride \u003cbr\u003e11.54 Polyvinylidenefluoride \u003cbr\u003e11.55 Polyvinylidenechloride \u003cbr\u003e11.56 Proteins \u003cbr\u003e11.57 Rubber, natural\u003cbr\u003e11.58 Silicone\u003cbr\u003e11.59 Styrene-butadiene rubber \u003cbr\u003e11.60 Styrene-butadiene-styrene rubber \u003cbr\u003e11.61 Starch\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12 PLASTICIZERS IN POLYMER BLENDS \u003c\/strong\u003e\u003cbr\u003e12.1 Plasticizer partition between component polymers \u003cbr\u003e12.2 Interaction of plasticizers with blend components \u003cbr\u003e12.3 Effect of plasticizers on blend properties \u003cbr\u003e12.4 Blending to reduce or to replace plasticizers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e13 PLASTICIZERS IN VARIOUS INDUSTRIAL PRODUCTS\u003c\/strong\u003e\u003cbr\u003e13.1 Adhesives and sealants \u003cbr\u003e13.2 Aerospace \u003cbr\u003e13.3 Agriculture \u003cbr\u003e13.4 Automotive applications \u003cbr\u003e13.5 Cementitious materials \u003cbr\u003e13.6 Coated fabrics \u003cbr\u003e13.7 Composites \u003cbr\u003e13.8 Cosmetics\u003cbr\u003e13.9 Cultural heritage\u003cbr\u003e13.10 Dental materials \u003cbr\u003e13.11 Electrical and electronics \u003cbr\u003e13.12 Fibers\u003cbr\u003e13.13 Film \u003cbr\u003e13.14 Food \u003cbr\u003e13.15 Flooring \u003cbr\u003e13.16 Foams\u003cbr\u003e13.17 Footwear \u003cbr\u003e13.18 Fuel cells \u003cbr\u003e13.19 Gaskets\u003cbr\u003e13.20 Household products \u003cbr\u003e13.21 Inks, varnishes, and lacquers \u003cbr\u003e13.22 Medical applications \u003cbr\u003e13.23 Membranes \u003cbr\u003e13.24 Microspheres \u003cbr\u003e13.25 Paints and coatings \u003cbr\u003e13.26 Pharmaceutical products \u003cbr\u003e13.27 Photographic materials\u003cbr\u003e13.28 Pipes \u003cbr\u003e13.29 Roofing materials \u003cbr\u003e13.30 Tires\u003cbr\u003e13.31 Toys \u003cbr\u003e \u003cem\u003eA. Marcilla, J.C. García, and M. Beltran \u003c\/em\u003e\u003cbr\u003e13.32 Tubing \u003cbr\u003e13.33 Wire and cable\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e14 PLASTICIZERS IN VARIOUS PROCESSING METHODS \u003c\/strong\u003e\u003cbr\u003e14.1 Blow molding \u003cbr\u003e14.2 Calendering \u003cbr\u003e14.3 Coil coating \u003cbr\u003e14.4 Compression molding \u003cbr\u003e14.5 Compounding (mixing) \u003cbr\u003e14.6 Dip coating \u003cbr\u003e14.7 Dry blending \u003cbr\u003e14.8 Extrusion \u003cbr\u003e14.9 Injection molding \u003cbr\u003e14.10 Polymer synthesis \u003cbr\u003e14.11 Rotational molding \u003cbr\u003e \u003cem\u003eM. Beltrán, J. C. Garcia, and A. Marcilla \u003c\/em\u003e\u003cbr\u003e14.12 Rubber processing \u003cbr\u003e14.13 Thermoforming \u003cbr\u003e14.14 Web coating \u003cbr\u003e14.15 Wire coating\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e15 SPECIALIZED ANALYTICAL METHODS IN PLASTICIZER TESTING\u003c\/strong\u003e\u003cbr\u003e15.1 Plasticizer identification \u003cbr\u003e15.2 Methods of determination of plasticizer concentration \u003cbr\u003e15.3 Determination of volatility, molecular motion, diffusion, and migration \u003cbr\u003e15.4 Methods of study of plasticized materials\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e16 MATHEMATICAL MODELLING IN APPLICATION TO PLASTICIZERS\u003c\/strong\u003e\u003cbr\u003e16.1 PVC-plasticizer interaction model \u003cbr\u003e16.2 Gas permeation\u003cbr\u003e16.3 Migration\u003cbr\u003e16.4 Dry-blending time \u003cbr\u003e16.5 Gelation and fusion \u003cbr\u003e16.6 Thermal decomposition\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e17 HEALTH AND SAFETY ISSUES WITH PLASTICIZERS AND PLASTICIZED MATERIALS \u003c\/strong\u003e\u003cbr\u003e17.1 Adjuvant effect of plasticizers \u003cbr\u003e \u003cem\u003eSøren Thor Larsen\u003c\/em\u003e\u003cbr\u003e17.1.1 Introduction\u003cbr\u003e17.1.2 Airway allergy\u003cbr\u003e17.1.3 Adjuvant effect \u003cbr\u003e17.1.4 Adjuvant effect of phthalate plasticizers? \u003cbr\u003e17.1.5 Conclusions \u003cbr\u003e17.2 The rodent hepatocarcinogenic response to phthalate plasticizers: basic biology and human \u003cbr\u003eextrapolation\u003cbr\u003e \u003cem\u003eClaire Sadler, Ann-Marie Bergholm, Nicola Powles-Glover, and Ruth A Roberts\u003c\/em\u003e\u003cbr\u003e17.2.1 Introduction\u003cbr\u003e17.2.2 Gene expression and cancer toxicology \u003cbr\u003e17.2.2.1 Gene expression\u003cbr\u003e17.2.2.2 Cancer biology: some basic considerations \u003cbr\u003e17.2.2.3 Chemical carcinogenesis \u003cbr\u003e17.2.3 Peroxisome proliferators and rodent nongenotoxic hepatocarcinogenesis \u003cbr\u003e17.2.3.1 The peroxisome proliferators \u003cbr\u003e17.2.3.2 PPARa \u003cbr\u003e17.2.4 Species differences in response to PPS \u003cbr\u003e17.2.5 Chemical regulation \u003cbr\u003e17.2.6 Summary \u003cbr\u003e17.3 The influence of maternal nutrition on phthalate teratogenicity \u003cbr\u003e \u003cem\u003eJanet Y. Uriu-Adams and Carl L. Keen\u003c\/em\u003e\u003cbr\u003e17.3.1 Introduction \u003cbr\u003e17.3.2 Reproductive toxicity of BBP and DEHP\u003cbr\u003e17.3.3 Acute phase response-induced alterations in maternal and conceptus nutrient metabolism \u003cbr\u003e17.3.4 Concluding comments\u003cbr\u003e17.3.5 Acknowledgements \u003cbr\u003e17.4 Public health implications of phthalates: A review of findings from the U.S. National Toxicology Program's Expert Panel Reports\u003cbr\u003e \u003cem\u003eStephanie R. Miles-Richardson\u003c\/em\u003e\u003cbr\u003e17.4.1 Introduction\u003cbr\u003e17.4.2 Exposure to adults in the general population \u003cbr\u003e17.4.3 Exposure of vulnerable sub-populations \u003cbr\u003e17.4.4 Health effects of phthalate exposure \u003cbr\u003e17.4.5 US NTP expert panel conclusions\u003cbr\u003e17.4.6 Public health implications\u003cbr\u003e17.5 Plasticizers in the indoor environment \u003cbr\u003e \u003cem\u003eWerner Butte\u003c\/em\u003e\u003cbr\u003e17.5.1 Introduction \u003cbr\u003e17.5.2 Sources of indoor plasticizers \u003cbr\u003e17.5.3 Occurrence of plasticizers indoors \u003cbr\u003e17.5.4 Impact of plasticizers in the indoor environment \u003cbr\u003e17.5.5 Summary \u003cbr\u003eAddendum \u003cbr\u003e \u003cstrong\u003e18 THE ENVIRONMENTAL FATE OF PLASTICIZERS \u003c\/strong\u003e\u003cbr\u003e \u003cem\u003eWilliam R. Roy\u003c\/em\u003e\u003cbr\u003e18.1 Introduction \u003cbr\u003e18.1.1 Releases to the environment\u003cbr\u003e18.1.2 Levels in the environment\u003cbr\u003e18.2 Plasticizers in water\u003cbr\u003e18.2.1 Solubility \u003cbr\u003e18.2.2 Volatilization from water \u003cbr\u003e18.2.3 Abiotic degradation in water \u003cbr\u003e18.2.4 Biodegradation in water\u003cbr\u003e18.2.5 Adsorption from water\u003cbr\u003e18.3 Soil and sediment \u003cbr\u003e18.3.1 Volatilization \u003cbr\u003e18.3.2 Biodegradation in soil \u003cbr\u003e18.4 Organisms \u003cbr\u003e18.5 Air \u003cbr\u003eSummary and concluding remarks\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e19 REGULATIONS AND DATA \u003c\/strong\u003e\u003cbr\u003e19.1 Toxic substance control \u003cbr\u003e19.2. Carcinogenic effect\u003cbr\u003e19.3 Teratogenic and mutagenic effect \u003cbr\u003e19.4 Workplace exposure limits \u003cbr\u003e19.5 Exposure from consumer products \u003cbr\u003e19.6 Plasticizers in drinking water \u003cbr\u003e19.7 Food regulatory acts \u003cbr\u003e19.8 Medical and other applications \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e20 PERSONAL PROTECTION \u003c\/strong\u003e\u003cbr\u003e20.1 Clothing \u003cbr\u003e20.2 Gloves \u003cbr\u003e20.3 Eye protection \u003cbr\u003e20.4 Respiratory protection\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e21 PLASTICIZER RECOVERY \u0026amp; RECYCLING \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e \u003cstrong\u003eINDEX\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has a Ph. D. in chemical engineering. His professional expertise includes both university teaching (full professor) and research \u0026amp; development. He has published 14 books: PVC Plastisols, (University Press); Polyvinylchloride Degradation, (Elsevier); Polyvinylchloride Stabilization, (Elsevier); Polymer Modified Textile Materials, (Wiley \u0026amp; Sons); Handbook of Material Weathering, 1st, 2nd, 3rd, and 4th Editions, (ChemTec Publishing); Handbook of Fillers, 1st and 2nd Editions, (ChemTec Publishing); Recycling of PVC, (ChemTec Publishing); Weathering of Plastics. Testing to Mirror Real Life Performance, (Plastics Design Library), Handbook of Solvents, Handbook of Plasticizers, Handbook of Antistatics, Handbook of Antiblocking, Release, and Slip Additives, PVC Degradation \u0026amp; Stabilization, The PVC Formulary (all by ChemTec Publishing), 47 scientific papers, and he has obtained 16 patents. He specializes in polymer additives, polymer processing and formulation, material durability and the development of sealants and coatings. He is included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition for his services to education."}
Description Editor: George Wypych ISBN 978-1- 77467-022-4 (hard copy)Published: Jan. 2023 Pages 894+xxiiTables 115, Figures 360 Summary Handbook of Plasticizers brings together in one place all that is known about this vital and rapidly expanding field. The book serves both as a basic reference source for researchers, engineers, and others involved in plastics processing,...
$390.00
in stock
{"id":7703557439645,"title":"Handbook of Plasticizers, 4th Edition","handle":"handbook-of-plasticizers-4th-edition","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eEditor: George Wypych \u003cbr\u003eISBN 978-1- 77467-022-4 (hard copy)\u003cbr\u003e\u003cbr\u003ePublished: Jan. 2023 \u003cbr data-mce-fragment=\"1\"\u003ePages 894+xxii\u003cbr data-mce-fragment=\"1\"\u003eTables 115, Figures 360\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eHandbook of Plasticizers brings together in one place all that is known about this vital and rapidly expanding field. The book serves both as a basic reference source for researchers, engineers, and others involved in plastics processing, research and development as well as a source of ideas regarding future developments.\u003cbr\u003e\u003cbr\u003eThis book contains a comprehensive review of information available in the open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The information from the most recent sources was used to update information from previous editions. \u003cbr\u003eThe information available today permits the use of plasticizers more effectively and helps to avoid certain plasticizers in applications where they may cause health or material durability problems. The source of raw materials used to produce plasticizers is becoming one of the issues in their selection. The book contains information on plasticizers obtained from renewable resources. Plasticizer incorporation demands a broad background of information because plasticizers are now added to complex mixtures containing a variety of materials that may have different reactions to the presence of plasticizers. Plasticizer choice is also not simple because there is a large selection of commercial plasticizers and various environmental issues dictating preferred solutions.\u003cbr\u003e\u003cbr\u003eBoth aspects considered indicate the need for a comprehensive source which, using currently available means of the computerized database, should provide data and a broad background of theoretical information in a condensed form easy to search. \u003cbr\u003e\u003cbr\u003eNumerical data on the most important plasticizers are provided in the tabular form of the printed book entitled Databook of Plasticizers. \u003cbr\u003eTwenty-one chapters are included in the Handbook of Plasticizers. The full Table of Contents is given below. Only some chapters are discussed here to add more information that may not be obvious from the table of contents.\u003cbr\u003e\u003cbr\u003eData are available for a large number of commercial plasticizers. This data is used in Chapter 2 to specify typical properties of plasticizers that belong to one of the thirty-one groups. The ranges of expected properties for a given group are also given.\u003cbr\u003e\u003cbr\u003eChapters 5, 6, and 7 contain new and historical approaches, which explain the mechanisms of plasticizers’ action and their behavior in plasticized systems. This theoretical background helps to understand practical observations and provides guidance to the methods of material improvement. Chapter 9 shows plasticization steps and results of various analytical studies, which help in understanding these steps and the parameters which may control them.\u003cbr\u003e\u003cbr\u003eTwenty-nine sections of Chapter 10 discuss plasticizers’ effect on the physical and mechanical properties of plasticized materials. These sections are essential for understanding the behavior of materials and the principles of their formulation. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eChapter 11 contains data on the use of plasticizers in 61 groups of polymers. The information is grouped under the following sections – Frequently used plasticizers, Practical concentrations, Main functions performed by plasticizers, Mechanism of plasticizer action, Effect of plasticizers on polymer and other additives, and Typical formulations. The use of such a consistent method of data presentation helps to find information quickly and to compare data from various sources and applications. \u003cbr\u003e\u003cbr\u003eSimilarly, Chapter 13 discusses the use of plasticizers in 33 groups of products according to a similar breakdown, including Plasticizer types, Plasticizer concentration, Reasons for plasticizer use, Advantages and disadvantages of plasticizer use, Effect of plasticizers on product properties, and Examples of formulations. Both chapters make use of a large number of patents and information in open literature discussing the most current findings and trends.\u003cbr\u003e\u003cbr\u003eIn Chapter 14, attempts are being made to discuss the following topics: The effect of plasticizers on process conditions, Processing defects formation and elimination with the use of plasticizers, In the fluence of rheological changes on the process, Equipment maintenance, and energy consumption. This chapter discusses 15 methods of polymer and rubber processing.\u003cbr\u003eSeveral chapters which follow discuss various aspects of plasticizer’s effect on health, safety, and the environment. Chapter 17 contains opinions of renowned experts on various aspects of plasticizers’ effect on health and safety. Chapter 18 contains information on plasticizers’ persistence in soil and water. Plasticizers releases and their presence in the environment are discussed for many important commercial plasticizers.\u003cbr\u003e\u003cbr\u003eThis short review and the Table of Contents show that this book is the most comprehensive source of current information on plasticizers. Plasticizers are used in so many products that every library should have this reference source of information on plasticizers readily available for its readers, especially considering that so many aspects of application plasticizers have recently changed that older books cannot provide the right answers. This book is best used in conjunction with the Plasticizer Database and\/or Databook of Plasticizers which give information on the present status and properties of industrial and research plasticizers.\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e1 INTRODUCTION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e1.1 Historical developments \u003cbr\u003e1.2 Expectations from plasticizers \u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2 PLASTICIZER TYPES\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Characteristic properties of industrial plasticizers \u003cbr\u003e2.2.1 Abietates \u003cbr\u003e2.2.2 Adipates \u003cbr\u003e2.2.3 Alkyl sulfonates \u003cbr\u003e2.2.4 Amides and amines \u003cbr\u003e2.2.5 Azelates \u003cbr\u003e2.2.6 Benzoates \u003cbr\u003e2.2.7 Bioplasticizers \u003cbr\u003e2.2.8 Biodegradable plasticizers \u003cbr\u003e2.2.9 Chlorinated paraffins, \u003cbr\u003e2.2.10 Citrates \u003cbr\u003e2.2.11 Cyclohexane dicarboxylic acid, diisononyl ester \u003cbr\u003e2.2.12 Energetic plasticizers \u003cbr\u003e2.2.13 Epoxides \u003cbr\u003e2.2.14 Esters of C10-30 dicarboxylic acids \u003cbr\u003e2.2.15 Ether-ester plasticizers \u003cbr\u003e2.2.16 Glutarates \u003cbr\u003e2.2.17 Hydrocarbon oils \u003cbr\u003e2.2.18 Hydrocarbon resins \u003cbr\u003e2.2.19 Isobutyrates \u003cbr\u003e2.2.20 Maleates \u003cbr\u003e2.2.21 Oleates \u003cbr\u003e2.2.22 Pentaerythritol derivatives \u003cbr\u003e2.2.23 Phosphates \u003cbr\u003e2.2.24 Phthalate-free plasticizers \u003cbr\u003e2.2.25 Phthalates \u003cbr\u003e2.2.26 Polymeric plasticizers \u003cbr\u003e2.2.26.1 Esters \u003cbr\u003e2.2.26.2 Polybutenes \u003cbr\u003e2.26.3 Others \u003cbr\u003e2.2.27 Ricinoleates \u003cbr\u003e2.2.28 Sebacates \u003cbr\u003e2.2.29 Succinates \u003cbr\u003e2.2.30 Sulfonamides \u003cbr\u003e2.2.31 Superplasticizers and plasticizers for concrete \u003cbr\u003e2.2.32 Tri- and pyromellitates \u003cbr\u003e2.3 Methods of synthesis and their effect on properties of plasticizers \u003cbr\u003e2.4 Reactive plasticizers and internal plasticization \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3 TYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e3.1 Abbreviations, terminology, and vocabulary \u003cbr\u003e3.2 Acid number \u003cbr\u003e3.3 Aging studies \u003cbr\u003e3.4 Ash \u003cbr\u003e3.5 Brittleness temperature \u003cbr\u003e3.6 Brookfield viscosity \u003cbr\u003e3.7 Chemical resistance \u003cbr\u003e3.8 Color \u003cbr\u003e3.9 Compatibility \u003cbr\u003e3.10 Compression set \u003cbr\u003e3.11 Concrete additives \u003cbr\u003e3.12 Electrical properties \u003cbr\u003e3.13 Extractable matter \u003cbr\u003e3.14 Flash and fire point \u003cbr\u003e3.15 Fogging \u003cbr\u003e3.16 Fusion \u003cbr\u003e3.17 Gas chromatography \u003cbr\u003e3.18 Hardness \u003cbr\u003e3.19 Infrared analysis of plasticizers \u003cbr\u003e3.20 Kinematic viscosity \u003cbr\u003e3.21 Marking (classification) \u003cbr\u003e3.22 Melt rheology \u003cbr\u003e3.23 Migration \u003cbr\u003e3.24 Polyvinylchloride standard specification \u003cbr\u003e3.25 Powder-mix time \u003cbr\u003e3.26 Purity \u003cbr\u003e3.27 Refractive index \u003cbr\u003e3.28 Residual contamination \u003cbr\u003e3.29 Sampling \u003cbr\u003e3.30 Saponification value \u003cbr\u003e3.31 Saybolt viscosity \u003cbr\u003e3.32 Sorption of plasticizer \u003cbr\u003e3.33 Specific gravity \u003cbr\u003e3.34 Specification \u003cbr\u003e3.35 Staining \u003cbr\u003e3.36 Stiffness \u003cbr\u003e3.37 Tensile properties \u003cbr\u003e3.38 Thermal expansion coefficient \u003cbr\u003e3.39 Unsaponifiable contents \u003cbr\u003e3.40 Viscosity of plastisols and organosols \u003cbr\u003e3.41 Water concentration \u003cbr\u003e3.42 Weight loss \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 TRANSPORTATION AND STORAGE\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e4.1 Transportation \u003cbr\u003e4.2 Storage \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 MECHANISMS OF PLASTICIZERS ACTION\u003c\/strong\u003e \u003cbr\u003e A. Marcilla and M. Beltrán\u003cbr\u003e5.1 Classical theories \u003cbr\u003e5.1.1 The lubricity theory \u003cbr\u003e5.1.2 The gel theory \u003cbr\u003e5.1.3 Moorshead's empirical approach \u003cbr\u003e5.2 The free volume theory \u003cbr\u003e5.2.1 Mathematical models \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6 COMPATIBILITY OF PLASTICIZERS 159\u003c\/strong\u003e\u003cbr\u003e George Wypych\u003cbr\u003e6.1 Prediction methods of plasticizer compatibility \u003cbr\u003e6.1.1 Flory-Huggins interaction parameter \u003cbr\u003e6.1.2 Prediction of Gibbs free energy of mixing UNIFAC-FV \u003cbr\u003e6.1.3 Molar volume \u003cbr\u003e6.1.4 Polarity \u003cbr\u003e6.1.5 Hansen solubility parameters \u003cbr\u003e6.1.6 Hoy solubility parameters and other methods based on solubility\u003cbr\u003e parameters \u003cbr\u003e6.1.7 Hildebrand solubility parameter \u003cbr\u003e6.1.8 Molecule charge density using COSMO \u003cbr\u003e6.1.9 Mesoscale simulation using DPD \u003cbr\u003e6.1.10 Ap\/Po ratio \u003cbr\u003e6.2 Validation methods \u003cbr\u003e6.2.1 DSC analysis \u003cbr\u003e6.2.2 Inverse gas chromatography \u003cbr\u003e6.2.3 Solid-gel transition temperature \u003cbr\u003e6.3 Effect of plasticizer structure and conditions of incorporation on\u003cbr\u003e compatibility \u003cbr\u003e6.3.1 Effect of plasticizer structure \u003cbr\u003e6.3.1.1 Aromaticity \u003cbr\u003e6.3.1.2 Branching \u003cbr\u003e6.3.1.3 Chain length \u003cbr\u003e6.3.1.4 Molecular weight \u003cbr\u003e6.3.1.5 Polarity \u003cbr\u003e6.3.2 Conditions of incorporation \u003cbr\u003e6.3.2.1 Amount (concentration) \u003cbr\u003e6.3.2.2 Method of processing \u003cbr\u003e6.3.2.3 Temperature \u003cbr\u003e6.4 Effect of plasticizer type on properties of plasticized material \u003cbr\u003e6.4.1 Crystallinity \u003cbr\u003e6.4.2 Exudation \u003cbr\u003e6.4.3 Permanence \u003cbr\u003e6.4.4 Thermal degradation \u003cbr\u003e6.4.5 Volatility \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7 PLASTICIZER MOTION AND DIFFUSION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e7.1 Plasticizer diffusion rate and the methods of study \u003cbr\u003e7.2 Plasticizer motion and distribution in the matrix \u003cbr\u003e7.3 Plasticizer migration \u003cbr\u003e7.4 Antiplasticization \u003cbr\u003e7.5 Effect of diffusion and mobility of plasticizers on their suitability \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8 EFFECT OF PLASTICIZERS ON OTHER COMPONENTS OF FORMULATION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e8.1 Plasticizer consumption by fillers \u003cbr\u003e8.2 Solubility of additives in plasticizers \u003cbr\u003e8.3 Additive molecular mobility and transport in the presence of\u003cbr\u003e plasticizers \u003cbr\u003e8.4 Effect of plasticizers on polymerization and curing reactions \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9 PLASTICIZATION STEPS\u003c\/strong\u003e \u003cbr\u003e A. Marcilla, J.C. García and M. Beltrán\u003cbr\u003e9.1 Plasticization steps \u003cbr\u003e9.2 Studies of plastisol's behavior during gelation and fusion \u003cbr\u003e9.2.1 Rheological characterization \u003cbr\u003e9.2.2 Studies by Scanning Electron Microscopy \u003cbr\u003e9.2.3 Study of polymer-plasticizer interactions by DSC \u003cbr\u003e9.2.4 Study of polymer-plasticizer interactions by SALS \u003cbr\u003e9.2.5 Study of polymer-plasticizer interactions by FTIR \u003cbr\u003e9.2.6 Study of polymer-plasticizer interactions by TG \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10 EFFECT OF PLASTICIZERS ON PROPERTIES OF PLASTICIZED MATERIALS\u003c\/strong\u003e\u003cbr\u003e George Wypych\u003cbr\u003e10.1 Mechanical properties \u003cbr\u003e10.1.1 Tensile strength \u003cbr\u003e10.1.2 Elongation \u003cbr\u003e10.1.3 Hardness \u003cbr\u003e10.1.4 Toughness, stiffness, ductility, modulus \u003cbr\u003e10.1.5 Other mechanical properties \u003cbr\u003e10.2 Optical properties \u003cbr\u003e10.3 Spectral properties \u003cbr\u003e10.4 Gloss \u003cbr\u003e10.5 Sound \u003cbr\u003e10.6 Rheological properties \u003cbr\u003e10.7 Magnetorheological properties \u003cbr\u003e10.8 Electrical properties \u003cbr\u003e10.9 Glass transition temperature \u003cbr\u003e10.10 Flammability and smoke formation in the presence of plasticizers \u003cbr\u003e10.11 Thermal degradation \u003cbr\u003e10.11.1 Thermal degradation of plasticizers \u003cbr\u003e10.11.2 Effect of polymer degradation products on plasticizers \u003cbr\u003e10.11.3 Effect of plasticizer degradation products on polymer degradation \u003cbr\u003e10.11.4 Loss of plasticizer from the material due to chemical decomposition\u003cbr\u003e reactions and evaporation \u003cbr\u003e10.11.5 Effect of plasticizers on the thermal degradation of materials \u003cbr\u003e10.12 Effect of UV and ionizing radiation on plasticized materials \u003cbr\u003e10.13 Hydrolysis \u003cbr\u003e10.14 Biodegradation in the presence of plasticizers \u003cbr\u003e10.15 Crystallization, structure, and orientation of macromolecules \u003cbr\u003e10.16 Morphology \u003cbr\u003e10.17 Plasticizer effect on contact with other materials \u003cbr\u003e10.18 Influence of plasticizers on swelling \u003cbr\u003e10.19 Fogging \u003cbr\u003e10.20 Hydrophobic\/hydrophilic properties \u003cbr\u003e10.21 Osmotic pressure of plasticizer in polymer \u003cbr\u003e10.22 Self-healing \u003cbr\u003e10.23 Shrinkage \u003cbr\u003e10.24 Soiling \u003cbr\u003e10.25 Free volume \u003cbr\u003e10.26 Dissolution \u003cbr\u003e10.27 Foaming \u003cbr\u003e10.28 Permeability \u003cbr\u003e10.29 Sorption \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11 PLASTICIZERS USE AND SELECTION FOR SPECIFIC POLYMERS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e11.1 ABS \u003cbr\u003e11.1.1 Frequently used plasticizers \u003cbr\u003e11.1.2 Practical concentrations \u003cbr\u003e11.1.3 Main functions performed by plasticizers \u003cbr\u003e11.1.4 Mechanism of plasticizer action \u003cbr\u003e11.1.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.1.6 Typical formulations \u003cbr\u003e11.2 Acrylics \u003cbr\u003e11.2.1 Frequently used plasticizers \u003cbr\u003e11.2.2 Practical concentrations \u003cbr\u003e11.2.3 Main functions performed by plasticizers \u003cbr\u003e11.2.4 Mechanism of plasticizer action \u003cbr\u003e11.2.5 Typical formulations \u003cbr\u003e11.3 Bromobutyl rubber \u003cbr\u003e11.3.1 Frequently used plasticizers \u003cbr\u003e11.3.2 Practical concentrations \u003cbr\u003e11.3.3 Main functions performed by plasticizers \u003cbr\u003e11.3.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.4 Butyl terpolymer \u003cbr\u003e11.4.1 Frequently used plasticizers \u003cbr\u003e11.4.2 Practical concentrations \u003cbr\u003e11.5 Cellulose acetate \u003cbr\u003e11.5.1 Frequently used plasticizers \u003cbr\u003e11.5.2 Practical concentrations \u003cbr\u003e11.5.3 Main functions performed by plasticizers \u003cbr\u003e11.5.4 Mechanism of plasticizer action \u003cbr\u003e11.5.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.6 Cellulose butyrate and propionate \u003cbr\u003e11.6.1 Frequently used plasticizers \u003cbr\u003e11.6.2 Practical concentrations \u003cbr\u003e11.6.3 Main functions performed by plasticizers \u003cbr\u003e11.6.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.7 Cellulose nitrate \u003cbr\u003e11.7.1 Frequently used plasticizers \u003cbr\u003e11.7.2 Practical concentrations \u003cbr\u003e11.7.3 Main functions performed by plasticizers \u003cbr\u003e11.7.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.7.5 Typical formulations \u003cbr\u003e11.8 Chitosan \u003cbr\u003e11.8.1 Frequently used plasticizers \u003cbr\u003e11.8.2 Practical concentrations \u003cbr\u003e11.8.3 Main functions performed by plasticizers \u003cbr\u003e11.8.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.9 Chlorinated polyvinylchloride \u003cbr\u003e11.9.1 Frequently used plasticizers \u003cbr\u003e11.9.2 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.10 Chlorosulfonated polyethylene \u003cbr\u003e11.10.1 Frequently used plasticizers \u003cbr\u003e11.10.2 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.11 Copolymers \u003cbr\u003e11.11.1 Frequently used plasticizers \u003cbr\u003e11.11.2 Practical concentrations \u003cbr\u003e11.11.3 Main functions performed by plasticizers \u003cbr\u003e11.11.4 Mechanism of plasticizer action \u003cbr\u003e11.12 Cyanoacrylates \u003cbr\u003e11.12.1 Frequently used plasticizers \u003cbr\u003e11.12.2 Practical concentrations \u003cbr\u003e11.12.3 Main functions performed by plasticizers \u003cbr\u003e11.12.4 Effect of plasticizer on polymer and other additives \u003cbr\u003e11.13 Ethylcellulose \u003cbr\u003e11.13.1 Frequently used plasticizers \u003cbr\u003e11.13.2 Practical concentrations \u003cbr\u003e11.13.3 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.14 Epoxy resin \u003cbr\u003e11.14.1 Frequently used plasticizers \u003cbr\u003e11.14.2 Practical concentrations \u003cbr\u003e11.14.3 Main functions performed by plasticizers \u003cbr\u003e11.14.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.15 Ethylene-propylene-diene copolymer \u003cbr\u003e11.15.1 Frequently used plasticizers \u003cbr\u003e11.15.2 Practical concentrations \u003cbr\u003e11.15.3 Main functions performed by plasticizers \u003cbr\u003e11.15.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.15.5 Typical formulations \u003cbr\u003e11.16 Ethylene-vinyl acetate copolymer \u003cbr\u003e11.17 Ionomers \u003cbr\u003e11.17.1 Frequently used plasticizers \u003cbr\u003e11.17.2 Practical concentrations \u003cbr\u003e11.17.3 Main functions performed by plasticizers \u003cbr\u003e11.17.4 Mechanism of plasticizer action \u003cbr\u003e11.17.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.18 Nitrile rubber \u003cbr\u003e11.18.1 Frequently used plasticizers \u003cbr\u003e11.18.2 Practical concentrations \u003cbr\u003e11.18.3 Main functions performed by plasticizers \u003cbr\u003e11.18.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.18.5 Typical formulations \u003cbr\u003e11.19 Perfluoropolymers \u003cbr\u003e11.20 Polyacrylonitrile \u003cbr\u003e11.20.1 Frequently used plasticizers \u003cbr\u003e11.20.2 Practical concentrations \u003cbr\u003e11.20.3 Main functions performed by plasticizers \u003cbr\u003e11.20.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.21 Polyamide \u003cbr\u003e11.21.1 Frequently used plasticizers \u003cbr\u003e11.21.2 Practical concentrations \u003cbr\u003e11.21.3 Main functions performed by plasticizers \u003cbr\u003e11.21.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.22 Polyamine \u003cbr\u003e11.23 Polyaniline \u003cbr\u003e11.24 Polybutadiene \u003cbr\u003e11.24.1 Frequently used plasticizers \u003cbr\u003e11.24.2 Practical concentrations \u003cbr\u003e11.24.3 Main functions performed by plasticizers \u003cbr\u003e11.25 Polybutylene \u003cbr\u003e11.25.1 Frequently used plasticizers \u003cbr\u003e11.25.2 Practical concentrations \u003cbr\u003e11.25.3 Main functions performed by plasticizers \u003cbr\u003e11.26 Poly(butyl methacrylate) \u003cbr\u003e11.26.1 Frequently used plasticizers \u003cbr\u003e11.26.2 Practical concentrations \u003cbr\u003e11.26.3 Main functions performed by plasticizers \u003cbr\u003e11.27 Polycarbonate \u003cbr\u003e11.27.1 Frequently used plasticizers \u003cbr\u003e11.27.2 Practical concentrations \u003cbr\u003e11.27.3 Main functions performed by plasticizers \u003cbr\u003e11.27.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.28 Polyester \u003cbr\u003e11.28.1 Frequently used plasticizers \u003cbr\u003e11.28.2 Practical concentrations \u003cbr\u003e11.28.3 Main functions performed by plasticizers \u003cbr\u003e11.28.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.28.5 Typical formulations \u003cbr\u003e11.29 Polyetherimide \u003cbr\u003e11.30 Polyethylacrylate \u003cbr\u003e11.31 Polyethylene \u003cbr\u003e11.31.1 Frequently used plasticizers \u003cbr\u003e11.31.2 Practical concentrations \u003cbr\u003e11.31.3 Main functions performed by plasticizers \u003cbr\u003e11.31.4 Mechanism of plasticizer action \u003cbr\u003e11.31.5 Typical formulations \u003cbr\u003e11.32 Poly(ethylene oxide) \u003cbr\u003e11.32.1 Frequently used plasticizers \u003cbr\u003e11.32.2 Practical concentrations \u003cbr\u003e11.32.3 Main functions performed by plasticizers \u003cbr\u003e11.32.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.33 Poly(3-hydroxybutyrate) \u003cbr\u003e11.33.1 Frequently used plasticizers \u003cbr\u003e11.33.2 Practical concentrations \u003cbr\u003e11.33.3 Main functions performed by plasticizers \u003cbr\u003e11.34 Polyisobutylene \u003cbr\u003e11.35 Polyisoprene \u003cbr\u003e11.35.1 Frequently used plasticizers \u003cbr\u003e11.35.2 Practical concentrations \u003cbr\u003e11.35.3 Main functions performed by plasticizers \u003cbr\u003e11.35.4 Typical formulations \u003cbr\u003e11.36 Polyimide \u003cbr\u003e11.36.1 Frequently used plasticizers \u003cbr\u003e11.36.2 Practical concentrations \u003cbr\u003e11.36.3 Main functions performed by plasticizers \u003cbr\u003e11.36.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.37 Polylactide \u003cbr\u003e11.37.1 Frequently used plasticizers \u003cbr\u003e11.37.2 Practical concentrations \u003cbr\u003e11.37.3 Main functions performed by plasticizers \u003cbr\u003e11.37.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.38 Polymethylmethacrylate \u003cbr\u003e11.38.1 Frequently used plasticizers \u003cbr\u003e11.38.2 Practical concentrations \u003cbr\u003e11.38.3 Main functions performed by plasticizers \u003cbr\u003e11.38.4 Mechanism of plasticizer action \u003cbr\u003e11.38.5 Typical formulations \u003cbr\u003e11.39 Polypropylene \u003cbr\u003e11.39.1 Frequently used plasticizers \u003cbr\u003e11.39.2 Practical concentrations \u003cbr\u003e11.39.3 Main functions performed by plasticizers \u003cbr\u003e11.39.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.40 Poly(propylene carbonate) \u003cbr\u003e11.40.1 Frequently used plasticizers \u003cbr\u003e11.40.2 Practical concentrations \u003cbr\u003e11.40.3 Main functions performed by plasticizers \u003cbr\u003e11.40.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.41 Poly(N-vinylcarbazole) \u003cbr\u003e11.42 Poly(N-vinylpyrrolidone) \u003cbr\u003e11.42.1 Frequently used plasticizers \u003cbr\u003e11.42.2 Practical concentrations \u003cbr\u003e11.42.3 Main functions performed by plasticizers \u003cbr\u003e11.42.4 Mechanism of plasticizer action \u003cbr\u003e11.42.5 Typical formulations \u003cbr\u003e11.43 Poly(phenylene ether) \u003cbr\u003e11.43.1 Frequently used plasticizers \u003cbr\u003e11.43.2 Practical concentrations \u003cbr\u003e11.43.3 Main functions performed by plasticizers \u003cbr\u003e11.44 Poly(phenylene sulfide) \u003cbr\u003e11.45 Polystyrene \u003cbr\u003e11.45.1 Frequently used plasticizers \u003cbr\u003e11.45.2 Practical concentrations \u003cbr\u003e11.45.3 Main functions performed by plasticizers \u003cbr\u003e11.46 Polysulfide \u003cbr\u003e11.46.1 Frequently used plasticizers \u003cbr\u003e11.46.2 Practical concentrations \u003cbr\u003e11.46.3 Main functions performed by plasticizers \u003cbr\u003e11.47 Polysulfone \u003cbr\u003e11.48 Polyurethanes \u003cbr\u003e11.48.1 Frequently used plasticizers \u003cbr\u003e11.48.2 Practical concentrations \u003cbr\u003e11.48.3 Main functions performed by plasticizers \u003cbr\u003e11.48.4 Mechanism of plasticizers action \u003cbr\u003e11.48.5 Effect of plasticizers on polymers and other additives \u003cbr\u003e11.48.6 Typical formulations \u003cbr\u003e11.49 Polyvinylacetate \u003cbr\u003e11.49.1 Frequently used plasticizers \u003cbr\u003e11.49.2 Practical concentrations \u003cbr\u003e11.49.3 Main functions performed by plasticizers \u003cbr\u003e11.49.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.50 Polyvinylalcohol \u003cbr\u003e11.50.1 Frequently used plasticizers \u003cbr\u003e11.50.2 Practical concentrations \u003cbr\u003e11.50.3 Main functions performed by plasticizers \u003cbr\u003e11.50.4 Mechanism of plasticizer action \u003cbr\u003e11.50.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.50.6 Typical formulations \u003cbr\u003e11.51 Polyvinylbutyral \u003cbr\u003e11.51.1 Frequently used plasticizers \u003cbr\u003e11.51.2 Practical concentrations \u003cbr\u003e11.51.3 Main functions performed by plasticizers \u003cbr\u003e11.51.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.52 Polyvinylchloride \u003cbr\u003e11.52.1 Frequently used plasticizers \u003cbr\u003e11.52.2 Practical concentrations \u003cbr\u003e11.52.3 Main functions performed by plasticizers \u003cbr\u003e11.52.4 Mechanism of plasticizer action \u003cbr\u003e11.52.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.52.6 Typical formulations \u003cbr\u003e11.53 Polyvinylfluoride \u003cbr\u003e11.54 Polyvinylidenefluoride \u003cbr\u003e11.54.1 Frequently used plasticizers \u003cbr\u003e11.54.2 Practical concentrations \u003cbr\u003e11.54.3 Main functions performed by plasticizers \u003cbr\u003e11.54.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.55 Polyvinylidenechloride \u003cbr\u003e11.56 Proteins \u003cbr\u003e11.56.1 Frequently used plasticizers \u003cbr\u003e11.56.2 Practical concentrations \u003cbr\u003e11.56.3 Main functions performed by plasticizers \u003cbr\u003e11.56.4 Mechanism of plasticizer action \u003cbr\u003e11.56.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.57 Rubber, natural \u003cbr\u003e11.57.1 Frequently used plasticizers \u003cbr\u003e11.57.2 Practical concentrations \u003cbr\u003e11.57.3 Main functions performed by plasticizers \u003cbr\u003e11.57.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.57.5 Typical formulations \u003cbr\u003e11.58 Silicone \u003cbr\u003e11.58.1 Frequently used plasticizers \u003cbr\u003e11.58.2 Practical concentrations \u003cbr\u003e11.58.3 Main functions performed by plasticizers \u003cbr\u003e11.58.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.58.5 Typical formulations \u003cbr\u003e11.59 Styrene-butadiene rubber \u003cbr\u003e11.59.1 Frequently used plasticizers \u003cbr\u003e11.59.2 Practical concentrations \u003cbr\u003e11.59.3 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.59.4 Typical formulations \u003cbr\u003e11.60 Styrene-butadiene-styrene rubber \u003cbr\u003e11.60.1 Frequently used plasticizers \u003cbr\u003e11.60.2 Practical concentrations \u003cbr\u003e11.60.3 Main functions performed by plasticizers \u003cbr\u003e11.60.4 Effect of plasticizer on polymer and other additives \u003cbr\u003e11.61 Starch \u003cbr\u003e11.61.1 Frequently used plasticizers \u003cbr\u003e11.61.2 Practical concentrations \u003cbr\u003e11.61.3 Main functions performed by plasticizers \u003cbr\u003e11.61.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.61.5 Typical formulations\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003e12 PLASTICIZERS IN POLYMER BLENDS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e12.1 Plasticizer partition between component polymers \u003cbr\u003e12.2 Interaction of plasticizers with blend components \u003cbr\u003e12.3 Effect of plasticizers on blend properties \u003cbr\u003e12.4 Blending to reduce or to replace plasticizers \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e13 PLASTICIZERS IN VARIOUS INDUSTRIAL PRODUCTS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e13.1 Adhesives and sealants \u003cbr\u003e13.1.1 Plasticizer types \u003cbr\u003e13.1.2 Plasticizer concentration \u003cbr\u003e13.1.3 Reasons for plasticizer use \u003cbr\u003e13.1.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.1.5 Effect of plasticizers on product properties \u003cbr\u003e13.1.6 Examples of formulations \u003cbr\u003e13.2 Aerospace \u003cbr\u003e13.3 Agriculture \u003cbr\u003e13.4 Automotive \u003cbr\u003e13.4.1 Plasticizer types \u003cbr\u003e13.4.2 Plasticizer concentration \u003cbr\u003e13.4.3 Reasons for plasticizer use \u003cbr\u003e13.4.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.4.5 Effect of plasticizers on product properties \u003cbr\u003e13.5 Cementitious materials \u003cbr\u003e13.5.1 Plasticizer types \u003cbr\u003e13.5.2 Plasticizer concentration \u003cbr\u003e13.5.3 Reasons for plasticizer use \u003cbr\u003e13.5.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.5.5 Effect of plasticizers on product properties \u003cbr\u003e13.5.6 Examples of formulations \u003cbr\u003e13.6 Coated fabrics \u003cbr\u003e13.6.1 Plasticizer types \u003cbr\u003e13.6.2 Plasticizer concentration \u003cbr\u003e13.6.3 Reasons for plasticizer use \u003cbr\u003e13.6.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.6.5 Effect of plasticizers on product properties \u003cbr\u003e13.6.6 Examples of formulations \u003cbr\u003e13.7 Composites \u003cbr\u003e13.7.1 Plasticizer types \u003cbr\u003e13.7.2 Plasticizer concentrations \u003cbr\u003e13.7.3 Reasons for addition \u003cbr\u003e13.7.4 Effect of plasticizers on product properties \u003cbr\u003e13.8 Cosmetics \u003cbr\u003e13.8.1 Plasticizer types \u003cbr\u003e13.8.2 Plasticizer concentration \u003cbr\u003e13.8.3 Reasons for plasticizer use \u003cbr\u003e13.8.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.8.5 Effect of plasticizers on product properties \u003cbr\u003e13.8.6 Examples of formulations \u003cbr\u003e13.9 Cultural heritage \u003cbr\u003e13.10 Dental materials \u003cbr\u003e13.10.1 Plasticizer types \u003cbr\u003e13.10.2 Plasticizer concentration \u003cbr\u003e13.10.3 Reasons for plasticizer use \u003cbr\u003e13.10.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.11 Electrical and electronics \u003cbr\u003e13.11.1 Plasticizer types \u003cbr\u003e13.11.2 Plasticizer concentration \u003cbr\u003e13.11.3 Reasons for plasticizer use \u003cbr\u003e13.11.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.11.5 Effect of plasticizers on product properties \u003cbr\u003e13.12 Fibers \u003cbr\u003e13.12.1 Plasticizer types \u003cbr\u003e13.12.2 Plasticizer concentration \u003cbr\u003e13.12.3 Reasons for plasticizer use \u003cbr\u003e13.12.4 Effect of plasticizers on product properties \u003cbr\u003e13.13 Film \u003cbr\u003e13.13.1 Plasticizer types \u003cbr\u003e13.13.2 Plasticizer concentration \u003cbr\u003e13.13.3 Reasons for plasticizer use \u003cbr\u003e13.13.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.13.5 Effect of plasticizers on product properties \u003cbr\u003e13.14 Food \u003cbr\u003e13.14.1 Plasticizer types \u003cbr\u003e13.14.2 Plasticizer concentration \u003cbr\u003e13.14.3 Reasons for plasticizer use \u003cbr\u003e13.14.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.14.5 Effect of plasticizers on product properties \u003cbr\u003e13.15 Flooring \u003cbr\u003e13.15.1 Plasticizer types \u003cbr\u003e13.15.2 Plasticizer concentration \u003cbr\u003e13.15.3 Reasons for plasticizer use \u003cbr\u003e13.15.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.15.5 Effect of plasticizers on product properties \u003cbr\u003e13.15.6 Examples of formulations \u003cbr\u003e13.16 Foams \u003cbr\u003e13.16.1 Plasticizer types \u003cbr\u003e13.16.2 Plasticizer concentration \u003cbr\u003e13.16.3 Reasons for plasticizer use \u003cbr\u003e13.16.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.16.5 Effect of plasticizers on product properties \u003cbr\u003e13.16.6 Examples of formulations \u003cbr\u003e13.17 Footwear \u003cbr\u003e13.17.1 Plasticizer types \u003cbr\u003e13.17.2 Plasticizer concentration \u003cbr\u003e13.17.3 Reasons for plasticizer use \u003cbr\u003e13.17.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.17.5 Example of formulation \u003cbr\u003e13.18 Fuel cells \u003cbr\u003e13.18.1 Plasticizer types \u003cbr\u003e13.18.2 Plasticizer concentration \u003cbr\u003e13.18.3 Reasons for plasticizer use \u003cbr\u003e13.19 Gaskets \u003cbr\u003e13.19.1 Plasticizer types \u003cbr\u003e13.19.2 Plasticizer concentration \u003cbr\u003e13.19.3 Reasons for plasticizer use \u003cbr\u003e13.19.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.19.5 Examples of formulations \u003cbr\u003e13.20 Household products \u003cbr\u003e13.21 Inks, varnishes, and lacquers \u003cbr\u003e13.21.1 Plasticizer types \u003cbr\u003e13.21.2 Plasticizer concentration \u003cbr\u003e13.21.3 Reasons for plasticizer use \u003cbr\u003e13.21.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.21.5 Effect of plasticizers on product properties \u003cbr\u003e13.21.6 Examples of formulations \u003cbr\u003e13.22 Medical applications \u003cbr\u003e13.22.1 Plasticizer types \u003cbr\u003e13.22.2 Plasticizer concentration \u003cbr\u003e13.22.3 Reasons for plasticizer use \u003cbr\u003e13.22.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.22.5 Effect of plasticizers on product properties \u003cbr\u003e13.22.6 Examples of formulations \u003cbr\u003e13.23 Membranes \u003cbr\u003e13.23.1 Plasticizer types \u003cbr\u003e13.23.2 Plasticizer concentration \u003cbr\u003e13.23.3 Reasons for plasticizer use \u003cbr\u003e13.23.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.24 Microspheres \u003cbr\u003e13.24.1 Plasticizer types \u003cbr\u003e13.24.2 Plasticizer concentration \u003cbr\u003e13.24.3 Reasons for plasticizer use \u003cbr\u003e13.25 Paints and coatings \u003cbr\u003e13.25.1 Plasticizer types \u003cbr\u003e13.25.2 Plasticizer concentration \u003cbr\u003e13.25.3 Reasons for plasticizer use \u003cbr\u003e13.25.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.25.5 Effect of plasticizers on product properties \u003cbr\u003e13.25.6 Examples of formulations \u003cbr\u003e13.26 Pharmaceutical products \u003cbr\u003e13.26.1 Plasticizer types \u003cbr\u003e13.26.2 Plasticizer concentration \u003cbr\u003e13.26.3 Reasons for plasticizer use \u003cbr\u003e13.26.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.26.5 Effect of plasticizers on product properties \u003cbr\u003e13.26.6 Examples of formulations \u003cbr\u003e13.27 Photographic materials \u003cbr\u003e13.27.1 Plasticizer types \u003cbr\u003e13.27.2 Plasticizer concentration \u003cbr\u003e13.27.3 Reasons for plasticizer use \u003cbr\u003e13.27.4 Effect of plasticizers on product properties \u003cbr\u003e13.28 Pipes \u003cbr\u003e13.28.1 Plasticizer types \u003cbr\u003e13.28.2 Plasticizer concentration \u003cbr\u003e13.28.3 Reasons for plasticizer use \u003cbr\u003e13.28.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.28.5 Effect of plasticizers on product properties \u003cbr\u003e13.28.6 Examples of formulations \u003cbr\u003e13.29 Roofing materials \u003cbr\u003e13.29.1 Plasticizer types \u003cbr\u003e13.29.2 Plasticizer concentration \u003cbr\u003e13.29.3 Reasons for plasticizer use \u003cbr\u003e13.29.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.29.5 Effect of plasticizers on product properties \u003cbr\u003e13.29.6 Examples of formulations \u003cbr\u003e13.30 Tires \u003cbr\u003e13.30.1 Plasticizer types \u003cbr\u003e13.30.2 Plasticizer concentration \u003cbr\u003e13.30.3 Reasons for plasticizer use \u003cbr\u003e13.30.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.30.5 Effect of plasticizers on product properties \u003cbr\u003e13.30.6 Examples of formulations \u003cbr\u003e13.31 Toys \u003cbr\u003e13.31.1 Plasticizer types \u003cbr\u003e13.31.2 Plasticizer concentration \u003cbr\u003e13.31.3 Reasons for plasticizer use \u003cbr\u003e13.31.4 Effect of plasticizers on product properties \u003cbr\u003e13.32 Tubing \u003cbr\u003e13.32.1 Plasticizer types \u003cbr\u003e13.32.2 Plasticizer concentration \u003cbr\u003e13.32.3 Reasons for plasticizer use \u003cbr\u003e13.32.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.32.5 Effect of plasticizers on product properties \u003cbr\u003e13.32.6 Examples of formulations \u003cbr\u003e13.33 Wire and cable \u003cbr\u003e13.33.1 Plasticizer types \u003cbr\u003e13.33.2 Plasticizer concentration \u003cbr\u003e13.33.3 Reasons for plasticizer use \u003cbr\u003e13.33.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.33.5 Effect of plasticizers on product properties \u003cbr\u003e13.33.6 Examples of formulations \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e14 PLASTICIZERS IN VARIOUS PROCESSING METHODS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e14.1 Blow molding \u003cbr\u003e14.2 Calendering \u003cbr\u003e14.3 Coil coating \u003cbr\u003e14.4 Compression molding \u003cbr\u003e14.5 Compounding (mixing) \u003cbr\u003e14.6 Dip coating \u003cbr\u003e14.7 Dry blending \u003cbr\u003e14.8 Extrusion \u003cbr\u003e14.9 Injection molding \u003cbr\u003e14.10 Polymer synthesis \u003cbr\u003e14.11 Rotational molding \u003cbr\u003e14.12 Rubber processing \u003cbr\u003e14.13 Thermoforming \u003cbr\u003e14.14 Web coating \u003cbr\u003e14.15 Wire coating \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e15 SPECIALIZED ANALYTICAL METHODS IN PLASTICIZER TESTING\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e15.1 Plasticizer identification \u003cbr\u003e15.2 Methods of determination of plasticizer concentration \u003cbr\u003e15.3 Determination of volatility, molecular motion, diffusion, and migration \u003cbr\u003e15.4 Methods of study of plasticized materials \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e16 MATHEMATICAL MODELING IN APPLICATION TO PLASTICIZERS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e16.1 PVC-plasticizer interaction model \u003cbr\u003e16.2 Gas permeation \u003cbr\u003e16.3 Migration \u003cbr\u003e16.4 Dry-blending time \u003cbr\u003e16.5 Gelation and fusion \u003cbr\u003e16.6 Thermal decomposition \u003cbr\u003e16.7 Potential health risk of exposure to DEHP from glove \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e17 HEALTH AND SAFETY ISSUES WITH PLASTICIZERS AND PLASTICIZED\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e MATERIALS\u003c\/strong\u003e \u003cbr\u003e17.1 Adjuvant effect of plasticizers \u003cbr\u003e Søren Thor Larsen \u003cbr\u003e17.1.1 Introduction \u003cbr\u003e17.1.2 Airway allergy \u003cbr\u003e17.1.3 Adjuvant effect \u003cbr\u003e17.1.4 Adjuvant effect of phthalate plasticizers \u003cbr\u003e 17.1.4.1 Epidemiological studies \u003cbr\u003e17.1.4.2 In vivo (animal) studies \u003cbr\u003e17.1.5 Conclusions \u003cbr\u003e17.2 The rodent hepatocarcinogenic response to phthalate plasticizers\u003cbr\u003e : basic biology and human extrapolation \u003cbr\u003e Abigail L Walker and Ruth A Roberts\u003cbr\u003e17.2.1 Introduction \u003cbr\u003e17.2.2 Gene expression and cancer toxicology \u003cbr\u003e17.2.2.1 Gene expression \u003cbr\u003e17.2.2.2 Cancer biology: some basic considerations \u003cbr\u003e17.2.2.3 Developing areas of interest in hepatocarcinogenesis \u003cbr\u003e17.2.2.4 Chemical carcinogenesis \u003cbr\u003e17.2.3 Peroxisome proliferators and rodent nongenotoxic\u003cbr\u003e hepatocarcinogenesis \u003cbr\u003e17.2.3.1 The peroxisome proliferators \u003cbr\u003e17.2.3.2 PPAR \u003cbr\u003e17.2.4 Species differences in response to peroxisome proliferators \u003cbr\u003e17.2.5 Chemical regulation \u003cbr\u003e17.2.5.1 Challenges in alternative models \u003cbr\u003e17.2.6 Summary \u003cbr\u003e17.3 The influence of maternal nutrition on phthalate teratogenicity \u003cbr\u003e Janet Y. Uriu-Adams1 and Carl L. Keen\u003cbr\u003e17.3.1 Introduction \u003cbr\u003e17.3.2 Reproductive toxicity of BBP and DEHP \u003cbr\u003e17.3.3 Acute phase response-induced alterations in maternal \u003cbr\u003e17.3.4 Concluding comments \u003cbr\u003e17.3.5 Recent findings \u003cbr\u003e17.3.6 Acknowledgments \u003cbr\u003e17.4 Public health implications of phthalates: A review of U.S. actions\u003cbr\u003e to protect those most vulnerable \u003cbr\u003e Stephanie R. Miles-Richardson and Dhara Richardson\u003cbr\u003e17.4.1 Introduction \u003cbr\u003e17.4.2 Implications of the COVID-19 pandemic on phthalate exposure \u003cbr\u003e17.4.3 The U.S. response to phthalate exposure \u003cbr\u003e17.4.3 Some U.S. State-level actions \u003cbr\u003e17.4.4 2008 Consumer Product Safety Improvement Act \u003cbr\u003e17.4.5 Food and Drug Administration (FDA) petition, lawsuit, and final ruling \u003cbr\u003e17.4.6 Preventing Harmful Exposure to Phthalates Act 117th Congress\u003cbr\u003e (2021-2022) \u003cbr\u003e17.4.7 Other U.S. Federal Agencies \u003cbr\u003e17.4.8 Conclusion \u003cbr\u003e17.5 Plasticizers in the indoor environment \u003cbr\u003e Werner Butte\u003cbr\u003e17.5.1 Introduction \u003cbr\u003e17.5.2 Sources of indoor plasticizers \u003cbr\u003e17.5.3 Occurrence of plasticizers indoors \u003cbr\u003e17.5.3.1 Indoor air \u003cbr\u003e17.5.3.2 House dust \u003cbr\u003e17.5.4 Impact of plasticizers in the indoor environment \u003cbr\u003e17.5.4.1 Indoor plasticizers and health \u003cbr\u003e17.5.4.2 Human exposure assessment for plasticizers in the indoor\u003cbr\u003e environment \u003cbr\u003e17.5.4.3 Reference and guideline values of plasticizers to assess indoor\u003cbr\u003e quality \u003cbr\u003e17.5.5 Summary \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e18 THE ENVIRONMENTAL FATE OF PLASTICIZERS\u003c\/strong\u003e \u003cbr\u003e William R. Roy\u003cbr\u003e18.1 Introduction \u003cbr\u003e18.1.1 Releases to the environment \u003cbr\u003e18.1.2 Levels in the environment \u003cbr\u003e18.2 Plasticizers in water \u003cbr\u003e18.2.1 Solubility \u003cbr\u003e18.2.2 Volatilization from water. \u003cbr\u003e18.2.3 Abiotic degradation in water \u003cbr\u003e18.2.4 Biodegradation in water \u003cbr\u003e18.2.5 Adsorption from water \u003cbr\u003e18.3 Soil and sediment \u003cbr\u003e18.3.1 Volatilization \u003cbr\u003e18.3.2 Biodegradation in soil \u003cbr\u003e18.4 Organisms \u003cbr\u003e18.5 Air \u003cbr\u003e Summary and concluding remarks \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e19 REGULATIONS AND DATA\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e19.1 Toxic substance control \u003cbr\u003e19.2. Carcinogenic effect \u003cbr\u003e19.3 Teratogenic and mutagenic effect \u003cbr\u003e19.4 Workplace exposure limits \u003cbr\u003e19.5 Exposure from consumer products \u003cbr\u003e19.6 Plasticizers in drinking water \u003cbr\u003e19.7 Food regulatory acts \u003cbr\u003e19.8 Medical and other applications \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e20 PERSONAL PROTECTION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e20.1 Clothing \u003cbr\u003e20.2 Gloves \u003cbr\u003e20.3 Eye protection \u003cbr\u003e20.4 Respiratory protection \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e21 PLASTICIZER RECOVERY \u0026amp; RECYCLING\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eINDEX\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.","published_at":"2023-02-24T14:06:20-05:00","created_at":"2023-02-24T13:56:07-05:00","vendor":"Chemtec Publishing","type":"Book","tags":["abiotic","adipates","adsorption","alkyl sulfonates","azelates","benzoates","biodegradation","book","chlorinated paraffins","citrates","coated fabrics","cosmetics","database","degradation","dental materials","electrical","electronics","energetic plasticizers","environment","epoxides","eye protection","fibers","film","flooring","foams","food","footwear","gaskets","gloves","inks","medical applications","membranes","p-additives","paints","pharmaceutical products","plasticisers","plasticizers additives","polymer","releases","solubility","varnishes","volatilization","water"],"price":39000,"price_min":39000,"price_max":39000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43393978663069,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Plasticizers, 4th Edition","public_title":null,"options":["Default Title"],"price":39000,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"978-1-77467-022-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/9781774670224-Case.png?v=1677265546"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/9781774670224-Case.png?v=1677265546","options":["Title"],"media":[{"alt":null,"id":27340016779421,"position":1,"preview_image":{"aspect_ratio":0.658,"height":450,"width":296,"src":"\/\/chemtec.org\/cdn\/shop\/products\/9781774670224-Case.png?v=1677265546"},"aspect_ratio":0.658,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/9781774670224-Case.png?v=1677265546","width":296}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eEditor: George Wypych \u003cbr\u003eISBN 978-1- 77467-022-4 (hard copy)\u003cbr\u003e\u003cbr\u003ePublished: Jan. 2023 \u003cbr data-mce-fragment=\"1\"\u003ePages 894+xxii\u003cbr data-mce-fragment=\"1\"\u003eTables 115, Figures 360\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eHandbook of Plasticizers brings together in one place all that is known about this vital and rapidly expanding field. The book serves both as a basic reference source for researchers, engineers, and others involved in plastics processing, research and development as well as a source of ideas regarding future developments.\u003cbr\u003e\u003cbr\u003eThis book contains a comprehensive review of information available in the open literature, such as published scientific papers, information from plasticizer manufacturers, and patent literature. The information from the most recent sources was used to update information from previous editions. \u003cbr\u003eThe information available today permits the use of plasticizers more effectively and helps to avoid certain plasticizers in applications where they may cause health or material durability problems. The source of raw materials used to produce plasticizers is becoming one of the issues in their selection. The book contains information on plasticizers obtained from renewable resources. Plasticizer incorporation demands a broad background of information because plasticizers are now added to complex mixtures containing a variety of materials that may have different reactions to the presence of plasticizers. Plasticizer choice is also not simple because there is a large selection of commercial plasticizers and various environmental issues dictating preferred solutions.\u003cbr\u003e\u003cbr\u003eBoth aspects considered indicate the need for a comprehensive source which, using currently available means of the computerized database, should provide data and a broad background of theoretical information in a condensed form easy to search. \u003cbr\u003e\u003cbr\u003eNumerical data on the most important plasticizers are provided in the tabular form of the printed book entitled Databook of Plasticizers. \u003cbr\u003eTwenty-one chapters are included in the Handbook of Plasticizers. The full Table of Contents is given below. Only some chapters are discussed here to add more information that may not be obvious from the table of contents.\u003cbr\u003e\u003cbr\u003eData are available for a large number of commercial plasticizers. This data is used in Chapter 2 to specify typical properties of plasticizers that belong to one of the thirty-one groups. The ranges of expected properties for a given group are also given.\u003cbr\u003e\u003cbr\u003eChapters 5, 6, and 7 contain new and historical approaches, which explain the mechanisms of plasticizers’ action and their behavior in plasticized systems. This theoretical background helps to understand practical observations and provides guidance to the methods of material improvement. Chapter 9 shows plasticization steps and results of various analytical studies, which help in understanding these steps and the parameters which may control them.\u003cbr\u003e\u003cbr\u003eTwenty-nine sections of Chapter 10 discuss plasticizers’ effect on the physical and mechanical properties of plasticized materials. These sections are essential for understanding the behavior of materials and the principles of their formulation. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eChapter 11 contains data on the use of plasticizers in 61 groups of polymers. The information is grouped under the following sections – Frequently used plasticizers, Practical concentrations, Main functions performed by plasticizers, Mechanism of plasticizer action, Effect of plasticizers on polymer and other additives, and Typical formulations. The use of such a consistent method of data presentation helps to find information quickly and to compare data from various sources and applications. \u003cbr\u003e\u003cbr\u003eSimilarly, Chapter 13 discusses the use of plasticizers in 33 groups of products according to a similar breakdown, including Plasticizer types, Plasticizer concentration, Reasons for plasticizer use, Advantages and disadvantages of plasticizer use, Effect of plasticizers on product properties, and Examples of formulations. Both chapters make use of a large number of patents and information in open literature discussing the most current findings and trends.\u003cbr\u003e\u003cbr\u003eIn Chapter 14, attempts are being made to discuss the following topics: The effect of plasticizers on process conditions, Processing defects formation and elimination with the use of plasticizers, In the fluence of rheological changes on the process, Equipment maintenance, and energy consumption. This chapter discusses 15 methods of polymer and rubber processing.\u003cbr\u003eSeveral chapters which follow discuss various aspects of plasticizer’s effect on health, safety, and the environment. Chapter 17 contains opinions of renowned experts on various aspects of plasticizers’ effect on health and safety. Chapter 18 contains information on plasticizers’ persistence in soil and water. Plasticizers releases and their presence in the environment are discussed for many important commercial plasticizers.\u003cbr\u003e\u003cbr\u003eThis short review and the Table of Contents show that this book is the most comprehensive source of current information on plasticizers. Plasticizers are used in so many products that every library should have this reference source of information on plasticizers readily available for its readers, especially considering that so many aspects of application plasticizers have recently changed that older books cannot provide the right answers. This book is best used in conjunction with the Plasticizer Database and\/or Databook of Plasticizers which give information on the present status and properties of industrial and research plasticizers.\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e1 INTRODUCTION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e1.1 Historical developments \u003cbr\u003e1.2 Expectations from plasticizers \u003cbr\u003e1.3 Definitions \u003cbr\u003e1.4 Classification \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e2 PLASTICIZER TYPES\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 Characteristic properties of industrial plasticizers \u003cbr\u003e2.2.1 Abietates \u003cbr\u003e2.2.2 Adipates \u003cbr\u003e2.2.3 Alkyl sulfonates \u003cbr\u003e2.2.4 Amides and amines \u003cbr\u003e2.2.5 Azelates \u003cbr\u003e2.2.6 Benzoates \u003cbr\u003e2.2.7 Bioplasticizers \u003cbr\u003e2.2.8 Biodegradable plasticizers \u003cbr\u003e2.2.9 Chlorinated paraffins, \u003cbr\u003e2.2.10 Citrates \u003cbr\u003e2.2.11 Cyclohexane dicarboxylic acid, diisononyl ester \u003cbr\u003e2.2.12 Energetic plasticizers \u003cbr\u003e2.2.13 Epoxides \u003cbr\u003e2.2.14 Esters of C10-30 dicarboxylic acids \u003cbr\u003e2.2.15 Ether-ester plasticizers \u003cbr\u003e2.2.16 Glutarates \u003cbr\u003e2.2.17 Hydrocarbon oils \u003cbr\u003e2.2.18 Hydrocarbon resins \u003cbr\u003e2.2.19 Isobutyrates \u003cbr\u003e2.2.20 Maleates \u003cbr\u003e2.2.21 Oleates \u003cbr\u003e2.2.22 Pentaerythritol derivatives \u003cbr\u003e2.2.23 Phosphates \u003cbr\u003e2.2.24 Phthalate-free plasticizers \u003cbr\u003e2.2.25 Phthalates \u003cbr\u003e2.2.26 Polymeric plasticizers \u003cbr\u003e2.2.26.1 Esters \u003cbr\u003e2.2.26.2 Polybutenes \u003cbr\u003e2.26.3 Others \u003cbr\u003e2.2.27 Ricinoleates \u003cbr\u003e2.2.28 Sebacates \u003cbr\u003e2.2.29 Succinates \u003cbr\u003e2.2.30 Sulfonamides \u003cbr\u003e2.2.31 Superplasticizers and plasticizers for concrete \u003cbr\u003e2.2.32 Tri- and pyromellitates \u003cbr\u003e2.3 Methods of synthesis and their effect on properties of plasticizers \u003cbr\u003e2.4 Reactive plasticizers and internal plasticization \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3 TYPICAL METHODS OF QUALITY CONTROL OF PLASTICIZERS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e3.1 Abbreviations, terminology, and vocabulary \u003cbr\u003e3.2 Acid number \u003cbr\u003e3.3 Aging studies \u003cbr\u003e3.4 Ash \u003cbr\u003e3.5 Brittleness temperature \u003cbr\u003e3.6 Brookfield viscosity \u003cbr\u003e3.7 Chemical resistance \u003cbr\u003e3.8 Color \u003cbr\u003e3.9 Compatibility \u003cbr\u003e3.10 Compression set \u003cbr\u003e3.11 Concrete additives \u003cbr\u003e3.12 Electrical properties \u003cbr\u003e3.13 Extractable matter \u003cbr\u003e3.14 Flash and fire point \u003cbr\u003e3.15 Fogging \u003cbr\u003e3.16 Fusion \u003cbr\u003e3.17 Gas chromatography \u003cbr\u003e3.18 Hardness \u003cbr\u003e3.19 Infrared analysis of plasticizers \u003cbr\u003e3.20 Kinematic viscosity \u003cbr\u003e3.21 Marking (classification) \u003cbr\u003e3.22 Melt rheology \u003cbr\u003e3.23 Migration \u003cbr\u003e3.24 Polyvinylchloride standard specification \u003cbr\u003e3.25 Powder-mix time \u003cbr\u003e3.26 Purity \u003cbr\u003e3.27 Refractive index \u003cbr\u003e3.28 Residual contamination \u003cbr\u003e3.29 Sampling \u003cbr\u003e3.30 Saponification value \u003cbr\u003e3.31 Saybolt viscosity \u003cbr\u003e3.32 Sorption of plasticizer \u003cbr\u003e3.33 Specific gravity \u003cbr\u003e3.34 Specification \u003cbr\u003e3.35 Staining \u003cbr\u003e3.36 Stiffness \u003cbr\u003e3.37 Tensile properties \u003cbr\u003e3.38 Thermal expansion coefficient \u003cbr\u003e3.39 Unsaponifiable contents \u003cbr\u003e3.40 Viscosity of plastisols and organosols \u003cbr\u003e3.41 Water concentration \u003cbr\u003e3.42 Weight loss \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 TRANSPORTATION AND STORAGE\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e4.1 Transportation \u003cbr\u003e4.2 Storage \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 MECHANISMS OF PLASTICIZERS ACTION\u003c\/strong\u003e \u003cbr\u003e A. Marcilla and M. Beltrán\u003cbr\u003e5.1 Classical theories \u003cbr\u003e5.1.1 The lubricity theory \u003cbr\u003e5.1.2 The gel theory \u003cbr\u003e5.1.3 Moorshead's empirical approach \u003cbr\u003e5.2 The free volume theory \u003cbr\u003e5.2.1 Mathematical models \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6 COMPATIBILITY OF PLASTICIZERS 159\u003c\/strong\u003e\u003cbr\u003e George Wypych\u003cbr\u003e6.1 Prediction methods of plasticizer compatibility \u003cbr\u003e6.1.1 Flory-Huggins interaction parameter \u003cbr\u003e6.1.2 Prediction of Gibbs free energy of mixing UNIFAC-FV \u003cbr\u003e6.1.3 Molar volume \u003cbr\u003e6.1.4 Polarity \u003cbr\u003e6.1.5 Hansen solubility parameters \u003cbr\u003e6.1.6 Hoy solubility parameters and other methods based on solubility\u003cbr\u003e parameters \u003cbr\u003e6.1.7 Hildebrand solubility parameter \u003cbr\u003e6.1.8 Molecule charge density using COSMO \u003cbr\u003e6.1.9 Mesoscale simulation using DPD \u003cbr\u003e6.1.10 Ap\/Po ratio \u003cbr\u003e6.2 Validation methods \u003cbr\u003e6.2.1 DSC analysis \u003cbr\u003e6.2.2 Inverse gas chromatography \u003cbr\u003e6.2.3 Solid-gel transition temperature \u003cbr\u003e6.3 Effect of plasticizer structure and conditions of incorporation on\u003cbr\u003e compatibility \u003cbr\u003e6.3.1 Effect of plasticizer structure \u003cbr\u003e6.3.1.1 Aromaticity \u003cbr\u003e6.3.1.2 Branching \u003cbr\u003e6.3.1.3 Chain length \u003cbr\u003e6.3.1.4 Molecular weight \u003cbr\u003e6.3.1.5 Polarity \u003cbr\u003e6.3.2 Conditions of incorporation \u003cbr\u003e6.3.2.1 Amount (concentration) \u003cbr\u003e6.3.2.2 Method of processing \u003cbr\u003e6.3.2.3 Temperature \u003cbr\u003e6.4 Effect of plasticizer type on properties of plasticized material \u003cbr\u003e6.4.1 Crystallinity \u003cbr\u003e6.4.2 Exudation \u003cbr\u003e6.4.3 Permanence \u003cbr\u003e6.4.4 Thermal degradation \u003cbr\u003e6.4.5 Volatility \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7 PLASTICIZER MOTION AND DIFFUSION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e7.1 Plasticizer diffusion rate and the methods of study \u003cbr\u003e7.2 Plasticizer motion and distribution in the matrix \u003cbr\u003e7.3 Plasticizer migration \u003cbr\u003e7.4 Antiplasticization \u003cbr\u003e7.5 Effect of diffusion and mobility of plasticizers on their suitability \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8 EFFECT OF PLASTICIZERS ON OTHER COMPONENTS OF FORMULATION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e8.1 Plasticizer consumption by fillers \u003cbr\u003e8.2 Solubility of additives in plasticizers \u003cbr\u003e8.3 Additive molecular mobility and transport in the presence of\u003cbr\u003e plasticizers \u003cbr\u003e8.4 Effect of plasticizers on polymerization and curing reactions \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9 PLASTICIZATION STEPS\u003c\/strong\u003e \u003cbr\u003e A. Marcilla, J.C. García and M. Beltrán\u003cbr\u003e9.1 Plasticization steps \u003cbr\u003e9.2 Studies of plastisol's behavior during gelation and fusion \u003cbr\u003e9.2.1 Rheological characterization \u003cbr\u003e9.2.2 Studies by Scanning Electron Microscopy \u003cbr\u003e9.2.3 Study of polymer-plasticizer interactions by DSC \u003cbr\u003e9.2.4 Study of polymer-plasticizer interactions by SALS \u003cbr\u003e9.2.5 Study of polymer-plasticizer interactions by FTIR \u003cbr\u003e9.2.6 Study of polymer-plasticizer interactions by TG \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10 EFFECT OF PLASTICIZERS ON PROPERTIES OF PLASTICIZED MATERIALS\u003c\/strong\u003e\u003cbr\u003e George Wypych\u003cbr\u003e10.1 Mechanical properties \u003cbr\u003e10.1.1 Tensile strength \u003cbr\u003e10.1.2 Elongation \u003cbr\u003e10.1.3 Hardness \u003cbr\u003e10.1.4 Toughness, stiffness, ductility, modulus \u003cbr\u003e10.1.5 Other mechanical properties \u003cbr\u003e10.2 Optical properties \u003cbr\u003e10.3 Spectral properties \u003cbr\u003e10.4 Gloss \u003cbr\u003e10.5 Sound \u003cbr\u003e10.6 Rheological properties \u003cbr\u003e10.7 Magnetorheological properties \u003cbr\u003e10.8 Electrical properties \u003cbr\u003e10.9 Glass transition temperature \u003cbr\u003e10.10 Flammability and smoke formation in the presence of plasticizers \u003cbr\u003e10.11 Thermal degradation \u003cbr\u003e10.11.1 Thermal degradation of plasticizers \u003cbr\u003e10.11.2 Effect of polymer degradation products on plasticizers \u003cbr\u003e10.11.3 Effect of plasticizer degradation products on polymer degradation \u003cbr\u003e10.11.4 Loss of plasticizer from the material due to chemical decomposition\u003cbr\u003e reactions and evaporation \u003cbr\u003e10.11.5 Effect of plasticizers on the thermal degradation of materials \u003cbr\u003e10.12 Effect of UV and ionizing radiation on plasticized materials \u003cbr\u003e10.13 Hydrolysis \u003cbr\u003e10.14 Biodegradation in the presence of plasticizers \u003cbr\u003e10.15 Crystallization, structure, and orientation of macromolecules \u003cbr\u003e10.16 Morphology \u003cbr\u003e10.17 Plasticizer effect on contact with other materials \u003cbr\u003e10.18 Influence of plasticizers on swelling \u003cbr\u003e10.19 Fogging \u003cbr\u003e10.20 Hydrophobic\/hydrophilic properties \u003cbr\u003e10.21 Osmotic pressure of plasticizer in polymer \u003cbr\u003e10.22 Self-healing \u003cbr\u003e10.23 Shrinkage \u003cbr\u003e10.24 Soiling \u003cbr\u003e10.25 Free volume \u003cbr\u003e10.26 Dissolution \u003cbr\u003e10.27 Foaming \u003cbr\u003e10.28 Permeability \u003cbr\u003e10.29 Sorption \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11 PLASTICIZERS USE AND SELECTION FOR SPECIFIC POLYMERS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e11.1 ABS \u003cbr\u003e11.1.1 Frequently used plasticizers \u003cbr\u003e11.1.2 Practical concentrations \u003cbr\u003e11.1.3 Main functions performed by plasticizers \u003cbr\u003e11.1.4 Mechanism of plasticizer action \u003cbr\u003e11.1.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.1.6 Typical formulations \u003cbr\u003e11.2 Acrylics \u003cbr\u003e11.2.1 Frequently used plasticizers \u003cbr\u003e11.2.2 Practical concentrations \u003cbr\u003e11.2.3 Main functions performed by plasticizers \u003cbr\u003e11.2.4 Mechanism of plasticizer action \u003cbr\u003e11.2.5 Typical formulations \u003cbr\u003e11.3 Bromobutyl rubber \u003cbr\u003e11.3.1 Frequently used plasticizers \u003cbr\u003e11.3.2 Practical concentrations \u003cbr\u003e11.3.3 Main functions performed by plasticizers \u003cbr\u003e11.3.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.4 Butyl terpolymer \u003cbr\u003e11.4.1 Frequently used plasticizers \u003cbr\u003e11.4.2 Practical concentrations \u003cbr\u003e11.5 Cellulose acetate \u003cbr\u003e11.5.1 Frequently used plasticizers \u003cbr\u003e11.5.2 Practical concentrations \u003cbr\u003e11.5.3 Main functions performed by plasticizers \u003cbr\u003e11.5.4 Mechanism of plasticizer action \u003cbr\u003e11.5.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.6 Cellulose butyrate and propionate \u003cbr\u003e11.6.1 Frequently used plasticizers \u003cbr\u003e11.6.2 Practical concentrations \u003cbr\u003e11.6.3 Main functions performed by plasticizers \u003cbr\u003e11.6.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.7 Cellulose nitrate \u003cbr\u003e11.7.1 Frequently used plasticizers \u003cbr\u003e11.7.2 Practical concentrations \u003cbr\u003e11.7.3 Main functions performed by plasticizers \u003cbr\u003e11.7.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.7.5 Typical formulations \u003cbr\u003e11.8 Chitosan \u003cbr\u003e11.8.1 Frequently used plasticizers \u003cbr\u003e11.8.2 Practical concentrations \u003cbr\u003e11.8.3 Main functions performed by plasticizers \u003cbr\u003e11.8.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.9 Chlorinated polyvinylchloride \u003cbr\u003e11.9.1 Frequently used plasticizers \u003cbr\u003e11.9.2 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.10 Chlorosulfonated polyethylene \u003cbr\u003e11.10.1 Frequently used plasticizers \u003cbr\u003e11.10.2 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.11 Copolymers \u003cbr\u003e11.11.1 Frequently used plasticizers \u003cbr\u003e11.11.2 Practical concentrations \u003cbr\u003e11.11.3 Main functions performed by plasticizers \u003cbr\u003e11.11.4 Mechanism of plasticizer action \u003cbr\u003e11.12 Cyanoacrylates \u003cbr\u003e11.12.1 Frequently used plasticizers \u003cbr\u003e11.12.2 Practical concentrations \u003cbr\u003e11.12.3 Main functions performed by plasticizers \u003cbr\u003e11.12.4 Effect of plasticizer on polymer and other additives \u003cbr\u003e11.13 Ethylcellulose \u003cbr\u003e11.13.1 Frequently used plasticizers \u003cbr\u003e11.13.2 Practical concentrations \u003cbr\u003e11.13.3 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.14 Epoxy resin \u003cbr\u003e11.14.1 Frequently used plasticizers \u003cbr\u003e11.14.2 Practical concentrations \u003cbr\u003e11.14.3 Main functions performed by plasticizers \u003cbr\u003e11.14.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.15 Ethylene-propylene-diene copolymer \u003cbr\u003e11.15.1 Frequently used plasticizers \u003cbr\u003e11.15.2 Practical concentrations \u003cbr\u003e11.15.3 Main functions performed by plasticizers \u003cbr\u003e11.15.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.15.5 Typical formulations \u003cbr\u003e11.16 Ethylene-vinyl acetate copolymer \u003cbr\u003e11.17 Ionomers \u003cbr\u003e11.17.1 Frequently used plasticizers \u003cbr\u003e11.17.2 Practical concentrations \u003cbr\u003e11.17.3 Main functions performed by plasticizers \u003cbr\u003e11.17.4 Mechanism of plasticizer action \u003cbr\u003e11.17.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.18 Nitrile rubber \u003cbr\u003e11.18.1 Frequently used plasticizers \u003cbr\u003e11.18.2 Practical concentrations \u003cbr\u003e11.18.3 Main functions performed by plasticizers \u003cbr\u003e11.18.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.18.5 Typical formulations \u003cbr\u003e11.19 Perfluoropolymers \u003cbr\u003e11.20 Polyacrylonitrile \u003cbr\u003e11.20.1 Frequently used plasticizers \u003cbr\u003e11.20.2 Practical concentrations \u003cbr\u003e11.20.3 Main functions performed by plasticizers \u003cbr\u003e11.20.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.21 Polyamide \u003cbr\u003e11.21.1 Frequently used plasticizers \u003cbr\u003e11.21.2 Practical concentrations \u003cbr\u003e11.21.3 Main functions performed by plasticizers \u003cbr\u003e11.21.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.22 Polyamine \u003cbr\u003e11.23 Polyaniline \u003cbr\u003e11.24 Polybutadiene \u003cbr\u003e11.24.1 Frequently used plasticizers \u003cbr\u003e11.24.2 Practical concentrations \u003cbr\u003e11.24.3 Main functions performed by plasticizers \u003cbr\u003e11.25 Polybutylene \u003cbr\u003e11.25.1 Frequently used plasticizers \u003cbr\u003e11.25.2 Practical concentrations \u003cbr\u003e11.25.3 Main functions performed by plasticizers \u003cbr\u003e11.26 Poly(butyl methacrylate) \u003cbr\u003e11.26.1 Frequently used plasticizers \u003cbr\u003e11.26.2 Practical concentrations \u003cbr\u003e11.26.3 Main functions performed by plasticizers \u003cbr\u003e11.27 Polycarbonate \u003cbr\u003e11.27.1 Frequently used plasticizers \u003cbr\u003e11.27.2 Practical concentrations \u003cbr\u003e11.27.3 Main functions performed by plasticizers \u003cbr\u003e11.27.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.28 Polyester \u003cbr\u003e11.28.1 Frequently used plasticizers \u003cbr\u003e11.28.2 Practical concentrations \u003cbr\u003e11.28.3 Main functions performed by plasticizers \u003cbr\u003e11.28.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.28.5 Typical formulations \u003cbr\u003e11.29 Polyetherimide \u003cbr\u003e11.30 Polyethylacrylate \u003cbr\u003e11.31 Polyethylene \u003cbr\u003e11.31.1 Frequently used plasticizers \u003cbr\u003e11.31.2 Practical concentrations \u003cbr\u003e11.31.3 Main functions performed by plasticizers \u003cbr\u003e11.31.4 Mechanism of plasticizer action \u003cbr\u003e11.31.5 Typical formulations \u003cbr\u003e11.32 Poly(ethylene oxide) \u003cbr\u003e11.32.1 Frequently used plasticizers \u003cbr\u003e11.32.2 Practical concentrations \u003cbr\u003e11.32.3 Main functions performed by plasticizers \u003cbr\u003e11.32.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.33 Poly(3-hydroxybutyrate) \u003cbr\u003e11.33.1 Frequently used plasticizers \u003cbr\u003e11.33.2 Practical concentrations \u003cbr\u003e11.33.3 Main functions performed by plasticizers \u003cbr\u003e11.34 Polyisobutylene \u003cbr\u003e11.35 Polyisoprene \u003cbr\u003e11.35.1 Frequently used plasticizers \u003cbr\u003e11.35.2 Practical concentrations \u003cbr\u003e11.35.3 Main functions performed by plasticizers \u003cbr\u003e11.35.4 Typical formulations \u003cbr\u003e11.36 Polyimide \u003cbr\u003e11.36.1 Frequently used plasticizers \u003cbr\u003e11.36.2 Practical concentrations \u003cbr\u003e11.36.3 Main functions performed by plasticizers \u003cbr\u003e11.36.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.37 Polylactide \u003cbr\u003e11.37.1 Frequently used plasticizers \u003cbr\u003e11.37.2 Practical concentrations \u003cbr\u003e11.37.3 Main functions performed by plasticizers \u003cbr\u003e11.37.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.38 Polymethylmethacrylate \u003cbr\u003e11.38.1 Frequently used plasticizers \u003cbr\u003e11.38.2 Practical concentrations \u003cbr\u003e11.38.3 Main functions performed by plasticizers \u003cbr\u003e11.38.4 Mechanism of plasticizer action \u003cbr\u003e11.38.5 Typical formulations \u003cbr\u003e11.39 Polypropylene \u003cbr\u003e11.39.1 Frequently used plasticizers \u003cbr\u003e11.39.2 Practical concentrations \u003cbr\u003e11.39.3 Main functions performed by plasticizers \u003cbr\u003e11.39.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.40 Poly(propylene carbonate) \u003cbr\u003e11.40.1 Frequently used plasticizers \u003cbr\u003e11.40.2 Practical concentrations \u003cbr\u003e11.40.3 Main functions performed by plasticizers \u003cbr\u003e11.40.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.41 Poly(N-vinylcarbazole) \u003cbr\u003e11.42 Poly(N-vinylpyrrolidone) \u003cbr\u003e11.42.1 Frequently used plasticizers \u003cbr\u003e11.42.2 Practical concentrations \u003cbr\u003e11.42.3 Main functions performed by plasticizers \u003cbr\u003e11.42.4 Mechanism of plasticizer action \u003cbr\u003e11.42.5 Typical formulations \u003cbr\u003e11.43 Poly(phenylene ether) \u003cbr\u003e11.43.1 Frequently used plasticizers \u003cbr\u003e11.43.2 Practical concentrations \u003cbr\u003e11.43.3 Main functions performed by plasticizers \u003cbr\u003e11.44 Poly(phenylene sulfide) \u003cbr\u003e11.45 Polystyrene \u003cbr\u003e11.45.1 Frequently used plasticizers \u003cbr\u003e11.45.2 Practical concentrations \u003cbr\u003e11.45.3 Main functions performed by plasticizers \u003cbr\u003e11.46 Polysulfide \u003cbr\u003e11.46.1 Frequently used plasticizers \u003cbr\u003e11.46.2 Practical concentrations \u003cbr\u003e11.46.3 Main functions performed by plasticizers \u003cbr\u003e11.47 Polysulfone \u003cbr\u003e11.48 Polyurethanes \u003cbr\u003e11.48.1 Frequently used plasticizers \u003cbr\u003e11.48.2 Practical concentrations \u003cbr\u003e11.48.3 Main functions performed by plasticizers \u003cbr\u003e11.48.4 Mechanism of plasticizers action \u003cbr\u003e11.48.5 Effect of plasticizers on polymers and other additives \u003cbr\u003e11.48.6 Typical formulations \u003cbr\u003e11.49 Polyvinylacetate \u003cbr\u003e11.49.1 Frequently used plasticizers \u003cbr\u003e11.49.2 Practical concentrations \u003cbr\u003e11.49.3 Main functions performed by plasticizers \u003cbr\u003e11.49.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.50 Polyvinylalcohol \u003cbr\u003e11.50.1 Frequently used plasticizers \u003cbr\u003e11.50.2 Practical concentrations \u003cbr\u003e11.50.3 Main functions performed by plasticizers \u003cbr\u003e11.50.4 Mechanism of plasticizer action \u003cbr\u003e11.50.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.50.6 Typical formulations \u003cbr\u003e11.51 Polyvinylbutyral \u003cbr\u003e11.51.1 Frequently used plasticizers \u003cbr\u003e11.51.2 Practical concentrations \u003cbr\u003e11.51.3 Main functions performed by plasticizers \u003cbr\u003e11.51.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.52 Polyvinylchloride \u003cbr\u003e11.52.1 Frequently used plasticizers \u003cbr\u003e11.52.2 Practical concentrations \u003cbr\u003e11.52.3 Main functions performed by plasticizers \u003cbr\u003e11.52.4 Mechanism of plasticizer action \u003cbr\u003e11.52.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.52.6 Typical formulations \u003cbr\u003e11.53 Polyvinylfluoride \u003cbr\u003e11.54 Polyvinylidenefluoride \u003cbr\u003e11.54.1 Frequently used plasticizers \u003cbr\u003e11.54.2 Practical concentrations \u003cbr\u003e11.54.3 Main functions performed by plasticizers \u003cbr\u003e11.54.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.55 Polyvinylidenechloride \u003cbr\u003e11.56 Proteins \u003cbr\u003e11.56.1 Frequently used plasticizers \u003cbr\u003e11.56.2 Practical concentrations \u003cbr\u003e11.56.3 Main functions performed by plasticizers \u003cbr\u003e11.56.4 Mechanism of plasticizer action \u003cbr\u003e11.56.5 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.57 Rubber, natural \u003cbr\u003e11.57.1 Frequently used plasticizers \u003cbr\u003e11.57.2 Practical concentrations \u003cbr\u003e11.57.3 Main functions performed by plasticizers \u003cbr\u003e11.57.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.57.5 Typical formulations \u003cbr\u003e11.58 Silicone \u003cbr\u003e11.58.1 Frequently used plasticizers \u003cbr\u003e11.58.2 Practical concentrations \u003cbr\u003e11.58.3 Main functions performed by plasticizers \u003cbr\u003e11.58.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.58.5 Typical formulations \u003cbr\u003e11.59 Styrene-butadiene rubber \u003cbr\u003e11.59.1 Frequently used plasticizers \u003cbr\u003e11.59.2 Practical concentrations \u003cbr\u003e11.59.3 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.59.4 Typical formulations \u003cbr\u003e11.60 Styrene-butadiene-styrene rubber \u003cbr\u003e11.60.1 Frequently used plasticizers \u003cbr\u003e11.60.2 Practical concentrations \u003cbr\u003e11.60.3 Main functions performed by plasticizers \u003cbr\u003e11.60.4 Effect of plasticizer on polymer and other additives \u003cbr\u003e11.61 Starch \u003cbr\u003e11.61.1 Frequently used plasticizers \u003cbr\u003e11.61.2 Practical concentrations \u003cbr\u003e11.61.3 Main functions performed by plasticizers \u003cbr\u003e11.61.4 Effect of plasticizers on polymer and other additives \u003cbr\u003e11.61.5 Typical formulations\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003e12 PLASTICIZERS IN POLYMER BLENDS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e12.1 Plasticizer partition between component polymers \u003cbr\u003e12.2 Interaction of plasticizers with blend components \u003cbr\u003e12.3 Effect of plasticizers on blend properties \u003cbr\u003e12.4 Blending to reduce or to replace plasticizers \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e13 PLASTICIZERS IN VARIOUS INDUSTRIAL PRODUCTS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e13.1 Adhesives and sealants \u003cbr\u003e13.1.1 Plasticizer types \u003cbr\u003e13.1.2 Plasticizer concentration \u003cbr\u003e13.1.3 Reasons for plasticizer use \u003cbr\u003e13.1.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.1.5 Effect of plasticizers on product properties \u003cbr\u003e13.1.6 Examples of formulations \u003cbr\u003e13.2 Aerospace \u003cbr\u003e13.3 Agriculture \u003cbr\u003e13.4 Automotive \u003cbr\u003e13.4.1 Plasticizer types \u003cbr\u003e13.4.2 Plasticizer concentration \u003cbr\u003e13.4.3 Reasons for plasticizer use \u003cbr\u003e13.4.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.4.5 Effect of plasticizers on product properties \u003cbr\u003e13.5 Cementitious materials \u003cbr\u003e13.5.1 Plasticizer types \u003cbr\u003e13.5.2 Plasticizer concentration \u003cbr\u003e13.5.3 Reasons for plasticizer use \u003cbr\u003e13.5.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.5.5 Effect of plasticizers on product properties \u003cbr\u003e13.5.6 Examples of formulations \u003cbr\u003e13.6 Coated fabrics \u003cbr\u003e13.6.1 Plasticizer types \u003cbr\u003e13.6.2 Plasticizer concentration \u003cbr\u003e13.6.3 Reasons for plasticizer use \u003cbr\u003e13.6.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.6.5 Effect of plasticizers on product properties \u003cbr\u003e13.6.6 Examples of formulations \u003cbr\u003e13.7 Composites \u003cbr\u003e13.7.1 Plasticizer types \u003cbr\u003e13.7.2 Plasticizer concentrations \u003cbr\u003e13.7.3 Reasons for addition \u003cbr\u003e13.7.4 Effect of plasticizers on product properties \u003cbr\u003e13.8 Cosmetics \u003cbr\u003e13.8.1 Plasticizer types \u003cbr\u003e13.8.2 Plasticizer concentration \u003cbr\u003e13.8.3 Reasons for plasticizer use \u003cbr\u003e13.8.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.8.5 Effect of plasticizers on product properties \u003cbr\u003e13.8.6 Examples of formulations \u003cbr\u003e13.9 Cultural heritage \u003cbr\u003e13.10 Dental materials \u003cbr\u003e13.10.1 Plasticizer types \u003cbr\u003e13.10.2 Plasticizer concentration \u003cbr\u003e13.10.3 Reasons for plasticizer use \u003cbr\u003e13.10.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.11 Electrical and electronics \u003cbr\u003e13.11.1 Plasticizer types \u003cbr\u003e13.11.2 Plasticizer concentration \u003cbr\u003e13.11.3 Reasons for plasticizer use \u003cbr\u003e13.11.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.11.5 Effect of plasticizers on product properties \u003cbr\u003e13.12 Fibers \u003cbr\u003e13.12.1 Plasticizer types \u003cbr\u003e13.12.2 Plasticizer concentration \u003cbr\u003e13.12.3 Reasons for plasticizer use \u003cbr\u003e13.12.4 Effect of plasticizers on product properties \u003cbr\u003e13.13 Film \u003cbr\u003e13.13.1 Plasticizer types \u003cbr\u003e13.13.2 Plasticizer concentration \u003cbr\u003e13.13.3 Reasons for plasticizer use \u003cbr\u003e13.13.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.13.5 Effect of plasticizers on product properties \u003cbr\u003e13.14 Food \u003cbr\u003e13.14.1 Plasticizer types \u003cbr\u003e13.14.2 Plasticizer concentration \u003cbr\u003e13.14.3 Reasons for plasticizer use \u003cbr\u003e13.14.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.14.5 Effect of plasticizers on product properties \u003cbr\u003e13.15 Flooring \u003cbr\u003e13.15.1 Plasticizer types \u003cbr\u003e13.15.2 Plasticizer concentration \u003cbr\u003e13.15.3 Reasons for plasticizer use \u003cbr\u003e13.15.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.15.5 Effect of plasticizers on product properties \u003cbr\u003e13.15.6 Examples of formulations \u003cbr\u003e13.16 Foams \u003cbr\u003e13.16.1 Plasticizer types \u003cbr\u003e13.16.2 Plasticizer concentration \u003cbr\u003e13.16.3 Reasons for plasticizer use \u003cbr\u003e13.16.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.16.5 Effect of plasticizers on product properties \u003cbr\u003e13.16.6 Examples of formulations \u003cbr\u003e13.17 Footwear \u003cbr\u003e13.17.1 Plasticizer types \u003cbr\u003e13.17.2 Plasticizer concentration \u003cbr\u003e13.17.3 Reasons for plasticizer use \u003cbr\u003e13.17.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.17.5 Example of formulation \u003cbr\u003e13.18 Fuel cells \u003cbr\u003e13.18.1 Plasticizer types \u003cbr\u003e13.18.2 Plasticizer concentration \u003cbr\u003e13.18.3 Reasons for plasticizer use \u003cbr\u003e13.19 Gaskets \u003cbr\u003e13.19.1 Plasticizer types \u003cbr\u003e13.19.2 Plasticizer concentration \u003cbr\u003e13.19.3 Reasons for plasticizer use \u003cbr\u003e13.19.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.19.5 Examples of formulations \u003cbr\u003e13.20 Household products \u003cbr\u003e13.21 Inks, varnishes, and lacquers \u003cbr\u003e13.21.1 Plasticizer types \u003cbr\u003e13.21.2 Plasticizer concentration \u003cbr\u003e13.21.3 Reasons for plasticizer use \u003cbr\u003e13.21.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.21.5 Effect of plasticizers on product properties \u003cbr\u003e13.21.6 Examples of formulations \u003cbr\u003e13.22 Medical applications \u003cbr\u003e13.22.1 Plasticizer types \u003cbr\u003e13.22.2 Plasticizer concentration \u003cbr\u003e13.22.3 Reasons for plasticizer use \u003cbr\u003e13.22.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.22.5 Effect of plasticizers on product properties \u003cbr\u003e13.22.6 Examples of formulations \u003cbr\u003e13.23 Membranes \u003cbr\u003e13.23.1 Plasticizer types \u003cbr\u003e13.23.2 Plasticizer concentration \u003cbr\u003e13.23.3 Reasons for plasticizer use \u003cbr\u003e13.23.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.24 Microspheres \u003cbr\u003e13.24.1 Plasticizer types \u003cbr\u003e13.24.2 Plasticizer concentration \u003cbr\u003e13.24.3 Reasons for plasticizer use \u003cbr\u003e13.25 Paints and coatings \u003cbr\u003e13.25.1 Plasticizer types \u003cbr\u003e13.25.2 Plasticizer concentration \u003cbr\u003e13.25.3 Reasons for plasticizer use \u003cbr\u003e13.25.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.25.5 Effect of plasticizers on product properties \u003cbr\u003e13.25.6 Examples of formulations \u003cbr\u003e13.26 Pharmaceutical products \u003cbr\u003e13.26.1 Plasticizer types \u003cbr\u003e13.26.2 Plasticizer concentration \u003cbr\u003e13.26.3 Reasons for plasticizer use \u003cbr\u003e13.26.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.26.5 Effect of plasticizers on product properties \u003cbr\u003e13.26.6 Examples of formulations \u003cbr\u003e13.27 Photographic materials \u003cbr\u003e13.27.1 Plasticizer types \u003cbr\u003e13.27.2 Plasticizer concentration \u003cbr\u003e13.27.3 Reasons for plasticizer use \u003cbr\u003e13.27.4 Effect of plasticizers on product properties \u003cbr\u003e13.28 Pipes \u003cbr\u003e13.28.1 Plasticizer types \u003cbr\u003e13.28.2 Plasticizer concentration \u003cbr\u003e13.28.3 Reasons for plasticizer use \u003cbr\u003e13.28.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.28.5 Effect of plasticizers on product properties \u003cbr\u003e13.28.6 Examples of formulations \u003cbr\u003e13.29 Roofing materials \u003cbr\u003e13.29.1 Plasticizer types \u003cbr\u003e13.29.2 Plasticizer concentration \u003cbr\u003e13.29.3 Reasons for plasticizer use \u003cbr\u003e13.29.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.29.5 Effect of plasticizers on product properties \u003cbr\u003e13.29.6 Examples of formulations \u003cbr\u003e13.30 Tires \u003cbr\u003e13.30.1 Plasticizer types \u003cbr\u003e13.30.2 Plasticizer concentration \u003cbr\u003e13.30.3 Reasons for plasticizer use \u003cbr\u003e13.30.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.30.5 Effect of plasticizers on product properties \u003cbr\u003e13.30.6 Examples of formulations \u003cbr\u003e13.31 Toys \u003cbr\u003e13.31.1 Plasticizer types \u003cbr\u003e13.31.2 Plasticizer concentration \u003cbr\u003e13.31.3 Reasons for plasticizer use \u003cbr\u003e13.31.4 Effect of plasticizers on product properties \u003cbr\u003e13.32 Tubing \u003cbr\u003e13.32.1 Plasticizer types \u003cbr\u003e13.32.2 Plasticizer concentration \u003cbr\u003e13.32.3 Reasons for plasticizer use \u003cbr\u003e13.32.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.32.5 Effect of plasticizers on product properties \u003cbr\u003e13.32.6 Examples of formulations \u003cbr\u003e13.33 Wire and cable \u003cbr\u003e13.33.1 Plasticizer types \u003cbr\u003e13.33.2 Plasticizer concentration \u003cbr\u003e13.33.3 Reasons for plasticizer use \u003cbr\u003e13.33.4 Advantages and disadvantages of plasticizers use \u003cbr\u003e13.33.5 Effect of plasticizers on product properties \u003cbr\u003e13.33.6 Examples of formulations \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e14 PLASTICIZERS IN VARIOUS PROCESSING METHODS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e14.1 Blow molding \u003cbr\u003e14.2 Calendering \u003cbr\u003e14.3 Coil coating \u003cbr\u003e14.4 Compression molding \u003cbr\u003e14.5 Compounding (mixing) \u003cbr\u003e14.6 Dip coating \u003cbr\u003e14.7 Dry blending \u003cbr\u003e14.8 Extrusion \u003cbr\u003e14.9 Injection molding \u003cbr\u003e14.10 Polymer synthesis \u003cbr\u003e14.11 Rotational molding \u003cbr\u003e14.12 Rubber processing \u003cbr\u003e14.13 Thermoforming \u003cbr\u003e14.14 Web coating \u003cbr\u003e14.15 Wire coating \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e15 SPECIALIZED ANALYTICAL METHODS IN PLASTICIZER TESTING\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e15.1 Plasticizer identification \u003cbr\u003e15.2 Methods of determination of plasticizer concentration \u003cbr\u003e15.3 Determination of volatility, molecular motion, diffusion, and migration \u003cbr\u003e15.4 Methods of study of plasticized materials \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e16 MATHEMATICAL MODELING IN APPLICATION TO PLASTICIZERS\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e16.1 PVC-plasticizer interaction model \u003cbr\u003e16.2 Gas permeation \u003cbr\u003e16.3 Migration \u003cbr\u003e16.4 Dry-blending time \u003cbr\u003e16.5 Gelation and fusion \u003cbr\u003e16.6 Thermal decomposition \u003cbr\u003e16.7 Potential health risk of exposure to DEHP from glove \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e17 HEALTH AND SAFETY ISSUES WITH PLASTICIZERS AND PLASTICIZED\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e MATERIALS\u003c\/strong\u003e \u003cbr\u003e17.1 Adjuvant effect of plasticizers \u003cbr\u003e Søren Thor Larsen \u003cbr\u003e17.1.1 Introduction \u003cbr\u003e17.1.2 Airway allergy \u003cbr\u003e17.1.3 Adjuvant effect \u003cbr\u003e17.1.4 Adjuvant effect of phthalate plasticizers \u003cbr\u003e 17.1.4.1 Epidemiological studies \u003cbr\u003e17.1.4.2 In vivo (animal) studies \u003cbr\u003e17.1.5 Conclusions \u003cbr\u003e17.2 The rodent hepatocarcinogenic response to phthalate plasticizers\u003cbr\u003e : basic biology and human extrapolation \u003cbr\u003e Abigail L Walker and Ruth A Roberts\u003cbr\u003e17.2.1 Introduction \u003cbr\u003e17.2.2 Gene expression and cancer toxicology \u003cbr\u003e17.2.2.1 Gene expression \u003cbr\u003e17.2.2.2 Cancer biology: some basic considerations \u003cbr\u003e17.2.2.3 Developing areas of interest in hepatocarcinogenesis \u003cbr\u003e17.2.2.4 Chemical carcinogenesis \u003cbr\u003e17.2.3 Peroxisome proliferators and rodent nongenotoxic\u003cbr\u003e hepatocarcinogenesis \u003cbr\u003e17.2.3.1 The peroxisome proliferators \u003cbr\u003e17.2.3.2 PPAR \u003cbr\u003e17.2.4 Species differences in response to peroxisome proliferators \u003cbr\u003e17.2.5 Chemical regulation \u003cbr\u003e17.2.5.1 Challenges in alternative models \u003cbr\u003e17.2.6 Summary \u003cbr\u003e17.3 The influence of maternal nutrition on phthalate teratogenicity \u003cbr\u003e Janet Y. Uriu-Adams1 and Carl L. Keen\u003cbr\u003e17.3.1 Introduction \u003cbr\u003e17.3.2 Reproductive toxicity of BBP and DEHP \u003cbr\u003e17.3.3 Acute phase response-induced alterations in maternal \u003cbr\u003e17.3.4 Concluding comments \u003cbr\u003e17.3.5 Recent findings \u003cbr\u003e17.3.6 Acknowledgments \u003cbr\u003e17.4 Public health implications of phthalates: A review of U.S. actions\u003cbr\u003e to protect those most vulnerable \u003cbr\u003e Stephanie R. Miles-Richardson and Dhara Richardson\u003cbr\u003e17.4.1 Introduction \u003cbr\u003e17.4.2 Implications of the COVID-19 pandemic on phthalate exposure \u003cbr\u003e17.4.3 The U.S. response to phthalate exposure \u003cbr\u003e17.4.3 Some U.S. State-level actions \u003cbr\u003e17.4.4 2008 Consumer Product Safety Improvement Act \u003cbr\u003e17.4.5 Food and Drug Administration (FDA) petition, lawsuit, and final ruling \u003cbr\u003e17.4.6 Preventing Harmful Exposure to Phthalates Act 117th Congress\u003cbr\u003e (2021-2022) \u003cbr\u003e17.4.7 Other U.S. Federal Agencies \u003cbr\u003e17.4.8 Conclusion \u003cbr\u003e17.5 Plasticizers in the indoor environment \u003cbr\u003e Werner Butte\u003cbr\u003e17.5.1 Introduction \u003cbr\u003e17.5.2 Sources of indoor plasticizers \u003cbr\u003e17.5.3 Occurrence of plasticizers indoors \u003cbr\u003e17.5.3.1 Indoor air \u003cbr\u003e17.5.3.2 House dust \u003cbr\u003e17.5.4 Impact of plasticizers in the indoor environment \u003cbr\u003e17.5.4.1 Indoor plasticizers and health \u003cbr\u003e17.5.4.2 Human exposure assessment for plasticizers in the indoor\u003cbr\u003e environment \u003cbr\u003e17.5.4.3 Reference and guideline values of plasticizers to assess indoor\u003cbr\u003e quality \u003cbr\u003e17.5.5 Summary \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e18 THE ENVIRONMENTAL FATE OF PLASTICIZERS\u003c\/strong\u003e \u003cbr\u003e William R. Roy\u003cbr\u003e18.1 Introduction \u003cbr\u003e18.1.1 Releases to the environment \u003cbr\u003e18.1.2 Levels in the environment \u003cbr\u003e18.2 Plasticizers in water \u003cbr\u003e18.2.1 Solubility \u003cbr\u003e18.2.2 Volatilization from water. \u003cbr\u003e18.2.3 Abiotic degradation in water \u003cbr\u003e18.2.4 Biodegradation in water \u003cbr\u003e18.2.5 Adsorption from water \u003cbr\u003e18.3 Soil and sediment \u003cbr\u003e18.3.1 Volatilization \u003cbr\u003e18.3.2 Biodegradation in soil \u003cbr\u003e18.4 Organisms \u003cbr\u003e18.5 Air \u003cbr\u003e Summary and concluding remarks \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e19 REGULATIONS AND DATA\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e19.1 Toxic substance control \u003cbr\u003e19.2. Carcinogenic effect \u003cbr\u003e19.3 Teratogenic and mutagenic effect \u003cbr\u003e19.4 Workplace exposure limits \u003cbr\u003e19.5 Exposure from consumer products \u003cbr\u003e19.6 Plasticizers in drinking water \u003cbr\u003e19.7 Food regulatory acts \u003cbr\u003e19.8 Medical and other applications \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e20 PERSONAL PROTECTION\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e20.1 Clothing \u003cbr\u003e20.2 Gloves \u003cbr\u003e20.3 Eye protection \u003cbr\u003e20.4 Respiratory protection \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e21 PLASTICIZER RECOVERY \u0026amp; RECYCLING\u003c\/strong\u003e \u003cbr\u003e George Wypych\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eINDEX\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education."}
Description Author: Edited by C. Vasile and A.K. Kulshreshtha ISBN 978-1-85957-249-8 Summary Volume One This is the first volume of a four volume set to be published in the next six months. This handbook is intended to provide an overview of the theory and practice of polymer blends and composites. It is a collection of...
$270.00
in stock
{"id":11242210372,"title":"Handbook of Polymer Blends and Composites , Volume 1","handle":"978-1-85957-249-8","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 978-1-85957-249-8 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cstrong\u003eVolume One\u003c\/strong\u003e \u003cbr\u003eThis is the first volume of a four volume set to be published in the next six months. This handbook is intended to provide an overview of the theory and practice of polymer blends and composites. It is a collection of monographs on the subject of polymer blends and composites but much remains to be done and understood. The subject is huge and the number of pages is limited. The first two volumes are concerned with the state-of-the-art in composites development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composite manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. History of Composites \u003cbr\u003e2. Particulate Fillers and Fibre Reinforcements \u003cbr\u003e3. Composites in Asia \u003cbr\u003e4. Advances in Wood-based Composites in China \u003cbr\u003e5. Overview of the Use of Composites Worldwide \u003cbr\u003e6. The Interface in Polymer Composites \u003cbr\u003e7. Novel Multifunctional Epoxy Resins \u003cbr\u003e8. Flame Retardant Polyester Resins \u003cbr\u003e9. Cure Kinetics of Vinyl Ester Resins \u003cbr\u003e10. Cure Monitoring \u003cbr\u003e11. Curing and Bonding of Composites using Electron Beam Processing \u003cbr\u003e12 composites at the Turn of the Century\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAnand Kumar Kulshreshtha joined the Ahmedabad Textile Industry's Research Association (ATIRA) as a Senior Scientific Officer in 1970, where he worked on the morphology and properties of natural fibres (cellulose). In 1975 he became a United Nations Fellow at the then Polytechnic Institute of New York with Professors E.M.Pearce and G.C.Tesoro. In 1978-1979 he worked as a postdoc at the University of Massachusetts, Amherst. From 1979-1980, he was an NRC Resident Research Associate at the Wright-Patterson Air Force Base, Ohio. Currently, he is Senior Manager (R\u0026amp;D) and Leader for Polymer and Information Groups at the Indian Petrochemicals Corporation Ltd., Vadodara. He is on the editorial board of the journal, 'Popular Plastics \u0026amp; Packaging' and author of about 200 research papers, articles and book chapters. \u003cbr\u003e\u003cbr\u003eCornelia Vasile is a senior researcher at the Romanian Academy, 'P.Poni' Institute of Macromolecular Chemistry, Iasi, Romania and Associate Professor at Laval University-Quebec Canada, 'Gh. Asachi' Technical University of Iasi and 'Al.I.Cuza' University of Iasi. She received her Ph.D. degree in the physical chemistry of macromolecules from 'Al.I.Cuza' University of Iasi, Romania. Cornelia is the author or co-author of seven books, 250 scientific articles, and 75 technical reports, as well as the holder of 38 patents. She is a member of the IUPAC, the Romanian Associations of Romanian Scientists and for Basic Research, the Commissions of the Romanian Academy for Thermal Analysis and Calorimetry, and of Environmental Protection.","published_at":"2017-06-22T21:13:08-04:00","created_at":"2017-06-22T21:13:08-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","book","fibre reinforcement","fillers reinforcements","p-chemistry","polymer","polymer blends","polymer composites","polymer reinforcements","wood-based composite"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378332356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymer Blends and Composites , Volume 1","public_title":null,"options":["Default Title"],"price":27000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-249-8","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-249-8.jpg?v=1499471195"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-249-8.jpg?v=1499471195","options":["Title"],"media":[{"alt":null,"id":356335845469,"position":1,"preview_image":{"aspect_ratio":0.722,"height":335,"width":242,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-249-8.jpg?v=1499471195"},"aspect_ratio":0.722,"height":335,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-249-8.jpg?v=1499471195","width":242}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 978-1-85957-249-8 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cstrong\u003eVolume One\u003c\/strong\u003e \u003cbr\u003eThis is the first volume of a four volume set to be published in the next six months. This handbook is intended to provide an overview of the theory and practice of polymer blends and composites. It is a collection of monographs on the subject of polymer blends and composites but much remains to be done and understood. The subject is huge and the number of pages is limited. The first two volumes are concerned with the state-of-the-art in composites development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composite manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. History of Composites \u003cbr\u003e2. Particulate Fillers and Fibre Reinforcements \u003cbr\u003e3. Composites in Asia \u003cbr\u003e4. Advances in Wood-based Composites in China \u003cbr\u003e5. Overview of the Use of Composites Worldwide \u003cbr\u003e6. The Interface in Polymer Composites \u003cbr\u003e7. Novel Multifunctional Epoxy Resins \u003cbr\u003e8. Flame Retardant Polyester Resins \u003cbr\u003e9. Cure Kinetics of Vinyl Ester Resins \u003cbr\u003e10. Cure Monitoring \u003cbr\u003e11. Curing and Bonding of Composites using Electron Beam Processing \u003cbr\u003e12 composites at the Turn of the Century\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAnand Kumar Kulshreshtha joined the Ahmedabad Textile Industry's Research Association (ATIRA) as a Senior Scientific Officer in 1970, where he worked on the morphology and properties of natural fibres (cellulose). In 1975 he became a United Nations Fellow at the then Polytechnic Institute of New York with Professors E.M.Pearce and G.C.Tesoro. In 1978-1979 he worked as a postdoc at the University of Massachusetts, Amherst. From 1979-1980, he was an NRC Resident Research Associate at the Wright-Patterson Air Force Base, Ohio. Currently, he is Senior Manager (R\u0026amp;D) and Leader for Polymer and Information Groups at the Indian Petrochemicals Corporation Ltd., Vadodara. He is on the editorial board of the journal, 'Popular Plastics \u0026amp; Packaging' and author of about 200 research papers, articles and book chapters. \u003cbr\u003e\u003cbr\u003eCornelia Vasile is a senior researcher at the Romanian Academy, 'P.Poni' Institute of Macromolecular Chemistry, Iasi, Romania and Associate Professor at Laval University-Quebec Canada, 'Gh. Asachi' Technical University of Iasi and 'Al.I.Cuza' University of Iasi. She received her Ph.D. degree in the physical chemistry of macromolecules from 'Al.I.Cuza' University of Iasi, Romania. Cornelia is the author or co-author of seven books, 250 scientific articles, and 75 technical reports, as well as the holder of 38 patents. She is a member of the IUPAC, the Romanian Associations of Romanian Scientists and for Basic Research, the Commissions of the Romanian Academy for Thermal Analysis and Calorimetry, and of Environmental Protection."}
Description Author: Edited by C. Vasile and A.K. Kulshreshtha ISBN 978-1-85957-278-8 Summary The extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of...
$270.00
in stock
{"id":11242210244,"title":"Handbook of Polymer Blends and Composites, Volume 2","handle":"978-1-85957-278-8","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 978-1-85957-278-8 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of the chemical industry in the 21st century is to produce plastics while being aware of the environment, by reducing waste production, reducing the consumption of materials, reducing the demand for energy, reducing the use of non-renewable resources, and reducing risks, hazards and costs. The topics of this handbook try to answer these questions in a specific way by using simple rules of mixing. Polymer blending is a very useful and versatile strategy for the polymer chemist for designing new materials that potentially fulfill these new 'green' requirements. \u003cbr\u003e\u003cbr\u003eThis four volume handbook, Handbook of Polymer Blends and Composites is intended to provide an overview of the theory and application of polymer blends and composites. The first two volumes (of which this is the second) are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. An Overview of Composite Fabrication, Design and Cost \u003cbr\u003e2. Liquid Moulding Processes \u003cbr\u003e3. Use of Advanced Composite Materials in the Construction of Suspension Push-Rods for A Formula One Racing Car \u003cbr\u003e4. Corrosion Resistance of Polymers, Polymer Blends, and Composites in Liquid Environments \u003cbr\u003e5. New Approaches to Reduce Plastic Combustibility \u003cbr\u003e6. Fibre Reinforced Plastic Composites for Biomedical Applications \u003cbr\u003e7. Composite Materials in the Nuclear and Space Industries: Specific Applications \u003cbr\u003e8. Advanced Composites for Offshore Developments \u003cbr\u003e9. Functional Polymer Composites \u003cbr\u003e10. Conducting Polymer Composites \u003cbr\u003e11. Recycling of Automotive Composites\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAnand Kumar Kulshreshtha joined the Ahmedabad Textile Industry's Research Association (ATIRA) as a Senior Scientific Officer in 1970, where he worked on the morphology and properties of natural fibres (cellulose). In 1975 he became a United Nations Fellow at the then Polytechnic Institute of New York with Professors E.M.Pearce and G.C.Tesoro. In 1978-1979 he worked as a postdoc at the University of Massachusetts, Amherst. From 1979-1980, he was an NRC Resident Research Associate at the Wright-Patterson Air Force Base, Ohio. Currently, he is Senior Manager (R\u0026amp;D) and Leader for Polymer and Information Groups at the Indian Petrochemicals Corporation Ltd., Vadodara. He is on the editorial board of the journal, 'Popular Plastics \u0026amp; Packaging' and author of about 200 research papers, articles and book chapters. \u003cbr\u003e\u003cbr\u003eCornelia Vasile is the senior researcher at the Romanian Academy, 'P.Poni' Institute of Macromolecular Chemistry, Iasi, Romania and Associate Professor at Laval University-Quebec Canada, 'Gh. Asachi' Technical University of Iasi and 'Al.I.Cuza' University of Iasi. She received her Ph.D. degree in the physical chemistry of macromolecules from 'Al.I.Cuza' University of Iasi, Romania. Cornelia is the author or co-author of seven books, 250 scientific articles, and 75 technical reports, as well as the holder of 38 patents. She is a member of the IUPAC, the Romanian Associations of Romanian Scientists and for Basic Research, the Commissions of the Romanian Academy for Thermal Analysis and Calorimetry, and of Environmental Protection.","published_at":"2017-06-22T21:13:08-04:00","created_at":"2017-06-22T21:13:08-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","advanced composite materials","book","composite materials in space","p-chemistry","polymer","polymer blends","polymer composites","recycling of composite materials"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378332036,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymer Blends and Composites, Volume 2","public_title":null,"options":["Default Title"],"price":27000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-278-8","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-278-8.jpg?v=1499471302"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-278-8.jpg?v=1499471302","options":["Title"],"media":[{"alt":null,"id":356335878237,"position":1,"preview_image":{"aspect_ratio":0.721,"height":499,"width":360,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-278-8.jpg?v=1499471302"},"aspect_ratio":0.721,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-278-8.jpg?v=1499471302","width":360}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 978-1-85957-278-8 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of the chemical industry in the 21st century is to produce plastics while being aware of the environment, by reducing waste production, reducing the consumption of materials, reducing the demand for energy, reducing the use of non-renewable resources, and reducing risks, hazards and costs. The topics of this handbook try to answer these questions in a specific way by using simple rules of mixing. Polymer blending is a very useful and versatile strategy for the polymer chemist for designing new materials that potentially fulfill these new 'green' requirements. \u003cbr\u003e\u003cbr\u003eThis four volume handbook, Handbook of Polymer Blends and Composites is intended to provide an overview of the theory and application of polymer blends and composites. The first two volumes (of which this is the second) are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. An Overview of Composite Fabrication, Design and Cost \u003cbr\u003e2. Liquid Moulding Processes \u003cbr\u003e3. Use of Advanced Composite Materials in the Construction of Suspension Push-Rods for A Formula One Racing Car \u003cbr\u003e4. Corrosion Resistance of Polymers, Polymer Blends, and Composites in Liquid Environments \u003cbr\u003e5. New Approaches to Reduce Plastic Combustibility \u003cbr\u003e6. Fibre Reinforced Plastic Composites for Biomedical Applications \u003cbr\u003e7. Composite Materials in the Nuclear and Space Industries: Specific Applications \u003cbr\u003e8. Advanced Composites for Offshore Developments \u003cbr\u003e9. Functional Polymer Composites \u003cbr\u003e10. Conducting Polymer Composites \u003cbr\u003e11. Recycling of Automotive Composites\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAnand Kumar Kulshreshtha joined the Ahmedabad Textile Industry's Research Association (ATIRA) as a Senior Scientific Officer in 1970, where he worked on the morphology and properties of natural fibres (cellulose). In 1975 he became a United Nations Fellow at the then Polytechnic Institute of New York with Professors E.M.Pearce and G.C.Tesoro. In 1978-1979 he worked as a postdoc at the University of Massachusetts, Amherst. From 1979-1980, he was an NRC Resident Research Associate at the Wright-Patterson Air Force Base, Ohio. Currently, he is Senior Manager (R\u0026amp;D) and Leader for Polymer and Information Groups at the Indian Petrochemicals Corporation Ltd., Vadodara. He is on the editorial board of the journal, 'Popular Plastics \u0026amp; Packaging' and author of about 200 research papers, articles and book chapters. \u003cbr\u003e\u003cbr\u003eCornelia Vasile is the senior researcher at the Romanian Academy, 'P.Poni' Institute of Macromolecular Chemistry, Iasi, Romania and Associate Professor at Laval University-Quebec Canada, 'Gh. Asachi' Technical University of Iasi and 'Al.I.Cuza' University of Iasi. She received her Ph.D. degree in the physical chemistry of macromolecules from 'Al.I.Cuza' University of Iasi, Romania. Cornelia is the author or co-author of seven books, 250 scientific articles, and 75 technical reports, as well as the holder of 38 patents. She is a member of the IUPAC, the Romanian Associations of Romanian Scientists and for Basic Research, the Commissions of the Romanian Academy for Thermal Analysis and Calorimetry, and of Environmental Protection."}
Description Author: Edited by C. Vasile and A.K. Kulshreshtha ISBN 1-85957-303-7 Summary The extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of...
$270.00
in stock
{"id":11242229700,"title":"Handbook of Polymer Blends and Composites, Volume 3","handle":"1-85957-303-7","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 1-85957-303-7 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of the chemical industry in the 21st century is to produce plastics while being aware of the environment, by reducing waste production, reducing the consumption of materials, reducing the demand for energy, reducing the use of non-renewable resources, and reducing risks, hazards and costs. The topics of this handbook try to answer these questions in a specific way by using simple rules of mixing. Polymer blending is a very useful and versatile strategy for the polymer chemist for designing new materials that potentially fulfill these new 'green' requirements. \u003cbr\u003e\u003cbr\u003eThis four volume handbook, Handbook of Polymer Blends and Composites is intended to provide an overview of the theory and application of polymer blends and composites. The first two volumes are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nTerminology, Thermodynamics of Multicomponent Polymer Systems, Phase Behaviour, Interface (Interphase) in Demixed Polymer Systems, Water Soluble Polymer Blends - Phase Behaviour and Complex Formation, Water Soluble Polymer Blends - Applications, Reactive Polymer Blending, Inter-Penetrating Networks, Heterofibres, Glass Transition in Polymer Blends, Crystallization in Polymer Blends, Effect of Radiation on Polymer Blends, Polymer Blend Ageing, Degradation Behaviour of Polymer Blends and Thermal Methods for Plastics Waste Treatment, Singular Thermal Behavior of Polystyrene\/Polydimethylsiloxane Blends.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nThe first two volumes (of which this is the second) are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications.","published_at":"2017-06-22T21:14:12-04:00","created_at":"2017-06-22T21:14:12-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","book","degradation of polymer blends","p-chemistry","polymer","polymer blends","polymer composites","properties of polymer blends and composites"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378399236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymer Blends and Composites, Volume 3","public_title":null,"options":["Default Title"],"price":27000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"1-85957-303-7","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/1-85957-303-7.jpg?v=1499471369"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/1-85957-303-7.jpg?v=1499471369","options":["Title"],"media":[{"alt":null,"id":356335911005,"position":1,"preview_image":{"aspect_ratio":0.691,"height":499,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/1-85957-303-7.jpg?v=1499471369"},"aspect_ratio":0.691,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/1-85957-303-7.jpg?v=1499471369","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 1-85957-303-7 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of the chemical industry in the 21st century is to produce plastics while being aware of the environment, by reducing waste production, reducing the consumption of materials, reducing the demand for energy, reducing the use of non-renewable resources, and reducing risks, hazards and costs. The topics of this handbook try to answer these questions in a specific way by using simple rules of mixing. Polymer blending is a very useful and versatile strategy for the polymer chemist for designing new materials that potentially fulfill these new 'green' requirements. \u003cbr\u003e\u003cbr\u003eThis four volume handbook, Handbook of Polymer Blends and Composites is intended to provide an overview of the theory and application of polymer blends and composites. The first two volumes are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nTerminology, Thermodynamics of Multicomponent Polymer Systems, Phase Behaviour, Interface (Interphase) in Demixed Polymer Systems, Water Soluble Polymer Blends - Phase Behaviour and Complex Formation, Water Soluble Polymer Blends - Applications, Reactive Polymer Blending, Inter-Penetrating Networks, Heterofibres, Glass Transition in Polymer Blends, Crystallization in Polymer Blends, Effect of Radiation on Polymer Blends, Polymer Blend Ageing, Degradation Behaviour of Polymer Blends and Thermal Methods for Plastics Waste Treatment, Singular Thermal Behavior of Polystyrene\/Polydimethylsiloxane Blends.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nThe first two volumes (of which this is the second) are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications."}
Description Author: Edited by C. Vasile and A.K. Kulshreshtha ISBN 978-1-85957-304-4 Summary The extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of...
$270.00
in stock
{"id":11242210436,"title":"Handbook of Polymer Blends and Composites, Volume 4","handle":"978-1-85957-304-4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 978-1-85957-304-4 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of the chemical industry in the 21st century is to produce plastics while being aware of the environment, by reducing waste production, reducing the consumption of materials, reducing the demand for energy, reducing the use of non-renewable resources, and reducing risks, hazards and costs. The topics of this handbook try to answer these questions in a specific way by using simple rules of mixing. Polymer blending is a very useful and versatile strategy for the polymer chemist for designing new materials that potentially fulfill these new 'green' requirements. \u003cbr\u003e\u003cbr\u003eThis four volume handbook, Handbook of Polymer Blends and Composites is intended to provide an overview of the theory and application of polymer blends and composites. The first two volumes are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nContents include: Polyolefin Blends, Metallocene Polyolefin Blends, PVC-based Blends, PS and Styrene-Copolymer-based Blends, Ionomer Blends, Polyamides, Polyesters, Polyvinyl Alcohol, Polyacrylates, Rubber Toughened Epoxies\/Thermosets, Blends Containing Thermostable Polymers, Polyurethane-based Blends, Silicones, Cellulosics or Lignocellulosics, Eco-Friendly Blends, Liquid Crystalline Polymers in Polymer Blends.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAnand Kumar Kulshreshtha joined the Ahmedabad Textile Industry's Research Association (ATIRA) as a Senior Scientific Officer in 1970, where he worked on the morphology and properties of natural fibres (cellulose). In 1975 he became a United Nations Fellow at the then Polytechnic Institute of New York with Professors E.M.Pearce and G.C.Tesoro. In 1978-1979 he worked as a postdoc at the University of Massachusetts, Amherst. From 1979-1980, he was an NRC Resident Research Associate at the Wright-Patterson Air Force Base, Ohio. Currently, he is Senior Manager (R\u0026amp;D) and Leader for Polymer and Information Groups at the Indian Petrochemicals Corporation Ltd., Vadodara. He is on the editorial board of the journal, 'Popular Plastics \u0026amp; Packaging' and author of about 200 research papers, articles and book chapters. \u003cbr\u003e\u003cbr\u003eCornelia Vasile is a senior researcher at the Romanian Academy, 'P.Poni' Institute of Macromolecular Chemistry, Iasi, Romania and Associate Professor at Laval University-Quebec Canada, 'Gh. Asachi' Technical University of Iasi and 'Al.I.Cuza' University of Iasi. She received her Ph.D. degree in the physical chemistry of macromolecules from 'Al.I.Cuza' University of Iasi, Romania. Cornelia is the author or co-author of seven books, 250 scientific articles, and 75 technical reports, as well as the holder of 38 patents. She is a member of the IUPAC, the Romanian Associations of Romanian Scientists and for Basic Research, the Commissions of the Romanian Academy for Thermal Analysis and Calorimetry, and of Environmental Protection.","published_at":"2017-06-22T21:13:09-04:00","created_at":"2017-06-22T21:13:09-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2003","application polymer blends and composite","book","multi-component systems","p-chemistry","polymer","polymer blends","polymer composites"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378332484,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymer Blends and Composites, Volume 4","public_title":null,"options":["Default Title"],"price":27000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-304-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-304-4.jpg?v=1499471436"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-304-4.jpg?v=1499471436","options":["Title"],"media":[{"alt":null,"id":356335943773,"position":1,"preview_image":{"aspect_ratio":0.707,"height":499,"width":353,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-304-4.jpg?v=1499471436"},"aspect_ratio":0.707,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-304-4.jpg?v=1499471436","width":353}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited by C. Vasile and A.K. Kulshreshtha \u003cbr\u003eISBN 978-1-85957-304-4 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe extraordinary growth in the use of plastics in the last century is in response to a growing world population, with its increasing demands for more food, better health care, improved housing and numerous cheaper and abundant consumer products. What is expected of the chemical industry in the 21st century is to produce plastics while being aware of the environment, by reducing waste production, reducing the consumption of materials, reducing the demand for energy, reducing the use of non-renewable resources, and reducing risks, hazards and costs. The topics of this handbook try to answer these questions in a specific way by using simple rules of mixing. Polymer blending is a very useful and versatile strategy for the polymer chemist for designing new materials that potentially fulfill these new 'green' requirements. \u003cbr\u003e\u003cbr\u003eThis four volume handbook, Handbook of Polymer Blends and Composites is intended to provide an overview of the theory and application of polymer blends and composites. The first two volumes are concerned with the state-of-the-art of composites' development, characteristics of particulate fillers and fibre reinforcements and interface characteristics, main procedures of composites manufacture and their applications. The other two volumes are dedicated to polymer blends. \u003cbr\u003e\u003cbr\u003ePractical and theoretical investigations are presented, which are aimed at generating an understanding of the fundamental nature of polymer mixtures and composites and describing progress in the thermodynamics of mixing (both in solution and solid state) of binary and multi-component systems. \u003cbr\u003e\u003cbr\u003eThis book will be useful to students, researchers, academics, and workers in the industry, who have an interest in polymer blends and composites.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nContents include: Polyolefin Blends, Metallocene Polyolefin Blends, PVC-based Blends, PS and Styrene-Copolymer-based Blends, Ionomer Blends, Polyamides, Polyesters, Polyvinyl Alcohol, Polyacrylates, Rubber Toughened Epoxies\/Thermosets, Blends Containing Thermostable Polymers, Polyurethane-based Blends, Silicones, Cellulosics or Lignocellulosics, Eco-Friendly Blends, Liquid Crystalline Polymers in Polymer Blends.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAnand Kumar Kulshreshtha joined the Ahmedabad Textile Industry's Research Association (ATIRA) as a Senior Scientific Officer in 1970, where he worked on the morphology and properties of natural fibres (cellulose). In 1975 he became a United Nations Fellow at the then Polytechnic Institute of New York with Professors E.M.Pearce and G.C.Tesoro. In 1978-1979 he worked as a postdoc at the University of Massachusetts, Amherst. From 1979-1980, he was an NRC Resident Research Associate at the Wright-Patterson Air Force Base, Ohio. Currently, he is Senior Manager (R\u0026amp;D) and Leader for Polymer and Information Groups at the Indian Petrochemicals Corporation Ltd., Vadodara. He is on the editorial board of the journal, 'Popular Plastics \u0026amp; Packaging' and author of about 200 research papers, articles and book chapters. \u003cbr\u003e\u003cbr\u003eCornelia Vasile is a senior researcher at the Romanian Academy, 'P.Poni' Institute of Macromolecular Chemistry, Iasi, Romania and Associate Professor at Laval University-Quebec Canada, 'Gh. Asachi' Technical University of Iasi and 'Al.I.Cuza' University of Iasi. She received her Ph.D. degree in the physical chemistry of macromolecules from 'Al.I.Cuza' University of Iasi, Romania. Cornelia is the author or co-author of seven books, 250 scientific articles, and 75 technical reports, as well as the holder of 38 patents. She is a member of the IUPAC, the Romanian Associations of Romanian Scientists and for Basic Research, the Commissions of the Romanian Academy for Thermal Analysis and Calorimetry, and of Environmental Protection."}
Description Author: David Eaves ISBN 978-1-85957-388-6 pages 274 Summary The use of polymer foams is extremely widespread. Indeed, it is hard to think of any industries where polymer foams do not have a part to play. They can be found for example in sports and leisure products, in military applications, in vehicles, in aircraft, and in...
$190.00
in stock
{"id":11242213380,"title":"Handbook of Polymer Foams","handle":"978-1-85957-388-4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: David Eaves \u003cbr\u003eISBN 978-1-85957-388-6 \u003cbr\u003e\u003cbr\u003epages 274\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe use of polymer foams is extremely widespread. Indeed, it is hard to think of any industries where polymer foams do not have a part to play. They can be found for example in sports and leisure products, in military applications, in vehicles, in aircraft, and in the home. Most people will encounter polymer foams every day in one form or another, whether it be in furniture, in packaging, in their car, in refrigerator insulation, or in some other common application. \u003cbr\u003e\u003cbr\u003eAlthough naturally occurring polymer foams have been known for a long time, (e.g., sponges, cork), synthetic polymer foams have only been introduced to the market over the last fifty years or so. The development of a new polymer has usually been quickly followed by its production in an expanded or foam form owing to the unique and useful properties, which can be realised in the expanded state. \u003cbr\u003e\u003cbr\u003eThis Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers, blowing agents having undergone considerable change and development in recent years in order to meet the requirements of the Montreal Protocol in relation to the reduction and elimination of chloroflurocarbons (CFC) and other ozone depleting agents. A chapter is also included on microcellular foams - a relatively new development where applications are still being explored. Most chapters have references to facilitate further exploration of the topics. The chapters are all written by experts in the field. \u003cbr\u003e\u003cbr\u003eThis book will be of interest to those just embarking upon an exploration of the subject of foams, whether in industry or academia. But this will be equally useful to those already working in the field, who need to know about different types of foam.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface \u003cbr\u003e1 Foam Fundamentals (David Eaves, Independent Consultant)\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Foam Structure\u003cbr\u003e1.3 Foam Properties\u003cbr\u003e1.3.1 Compression Properties\u003cbr\u003e1.3.2 Energy Absorption Properties\u003cbr\u003e1.3.3 Thermal Properties\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e2 Blowing Agents (Sachida Singh, Huntsman Polyurethanes)\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Physical Blowing Agents\u003cbr\u003e2.2.1 Selection Criteria for Physical Blowing Agents\u003cbr\u003e2.2.2 Halogenated Hydrocarbons\u003cbr\u003e2.2.3 Hydrocarbons (HC)\u003cbr\u003e2.2.4 Inert Gases\u003cbr\u003e2.2.5 Other Physical Blowing Agents\u003cbr\u003e2.2.6 Blends of Physical Blowing Agents\u003cbr\u003e2.2.7 Encapsulated Physical Blowing Agents\u003cbr\u003e2.2.8 Physical Blowing Agent by Foam Type and Application\u003cbr\u003e2.3 Chemical Blowing Agents\u003cbr\u003e2.3.1 Selection Criteria for Chemical Blowing Agent\u003cbr\u003e2.3.2 Exothermic CBA\u003cbr\u003e2.3.3 Endothermic CBA\u003cbr\u003e2.3.4 Endo\/Exo Blends\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e3 Expanded Polystyrene: Development, Processing, Applications and Key Issues (Andrew Barnetson, BPF)\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.1.1 Development of Expanded Polystyrene (EPS)\u003cbr\u003e3.2 Manufacture of Expanded Polystyrene Mouldings\u003cbr\u003e3.3 Applications for Expanded Polystyrene Packaging\u003cbr\u003e3.3.1 Packaging\u003cbr\u003e3.3.2 Construction\u003cbr\u003e3.3.3 Other Applications\u003cbr\u003e3.3.4 Novel Applications\u003cbr\u003e3.4 Properties of EPS\u003cbr\u003e3.4.1 Mechanical Performance\u003cbr\u003e3.4.2 Thermal Insulation\u003cbr\u003e3.4.3 Chemical Properties\u003cbr\u003e3.4.4 Recent Research on Properties of EPS: Value for Fruit and Vegetables\u003cbr\u003e3.5 Global Structure of Markets and Companies\u003cbr\u003e3.5.1 Europe\u003cbr\u003e3.5.2 Asia\u003cbr\u003e3.5.3 USA\u003cbr\u003e3.6 Key Issues Facing the EPS Industry\u003cbr\u003e3.6.1 Fire\u003cbr\u003e3.6.2 Recycling\u003cbr\u003e3.6.2 Alternatives to Mechanical Recycling\u003cbr\u003eFurther Information \u003cbr\u003e\u003cbr\u003e4 Rigid Polyurethane Foams (David Eaves, Independent Consultant)\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Materials\u003cbr\u003e4.2.1 Polyols\u003cbr\u003e4.2.2 Isocyanates\u003cbr\u003e4.2.3 Blowing Agents\u003cbr\u003e4.2.4 Other Additives\u003cbr\u003e4.3 Manufacturing Processes for Rigid Polyurethane Foam\u003cbr\u003e4.4 Recycling Processes for Rigid Polyurethane Foam\u003cbr\u003e4.5 Properties of Rigid Polyurethane Foams\u003cbr\u003e4.6 Applications\u003cbr\u003e4.6.1 Applications in Construction\u003cbr\u003e4.6.2 Applications in the Appliance Industry\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e5 Flexible Polyurethane Foam (Tyler Housel, Inolex Chemical Company)\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Chemistry\u003cbr\u003e5.3 Starting Materials\u003cbr\u003e5.3.1 Isocyanate\u003cbr\u003e5.3.2 Polyol\u003cbr\u003e5.3.3 Water\u003cbr\u003e5.3.4 Surfactant\u003cbr\u003e5.3.5 Catalyst\u003cbr\u003e5.3.6 Colorants\u003cbr\u003e5.3.7 Antioxidants\u003cbr\u003e5.3.8 Light Stabilisers\u003cbr\u003e5.3.9 Flame Retardants\u003cbr\u003e5.3.10 Adhesion Promoters\u003cbr\u003e5.3.11 Other Additives\u003cbr\u003e5.4 The Foaming Process\u003cbr\u003e5.4.1 Raw Material Conditioning\u003cbr\u003e5.4.2 Mixing\u003cbr\u003e5.4.3 Growth\u003cbr\u003e5.4.4 Cell Opening\u003cbr\u003e5.4.5 Cure\u003cbr\u003e5.5 Manufacturing Equipment\u003cbr\u003e5.5.1 Storage and Delivery\u003cbr\u003e5.5.2 Mixing\u003cbr\u003e5.5.3 Foam Rise and Cure\u003cbr\u003e5.5.4 Innovations\u003cbr\u003e5.6 Foam Characterisation\u003cbr\u003e5.6.1 Density\u003cbr\u003e5.6.2 Hardness\u003cbr\u003e5.6.3 Resilience\u003cbr\u003e5.6.4 Porosity\u003cbr\u003e5.6.5 Strength Properties\u003cbr\u003e5.6.6 Cell Structure\u003cbr\u003e5.6.7 Environmental Stability\u003cbr\u003e5.6.8 Fatigue\u003cbr\u003e5.6.9 Compression Set\u003cbr\u003e5.6.10 Flammability\u003cbr\u003e5.7 FPF Markets\u003cbr\u003e5.7.1 Transportation\u003cbr\u003e5.7.2 Comfort\u003cbr\u003e5.7.3 Carpet Cushion\u003cbr\u003e5.7.4 Packaging\u003cbr\u003e5.7.5 Specialty Applications\u003cbr\u003e5.8 Environmental Issues\u003cbr\u003e5.9 Organisations\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e6 Rigid PVC Foam (Noreen Thomas, University of Loughborough)\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Foam Extrusion\u003cbr\u003e6.2.1 Basic Principles\u003cbr\u003e6.2.2 Extrusion Processes\u003cbr\u003e6.2.3 Effect of Processing Conditions\u003cbr\u003e6.3 Foam Formulation Technology\u003cbr\u003e6.3.1 Blowing Agents\u003cbr\u003e6.3.2 Processing Aids\u003cbr\u003e6.3.3 Type of PVC\u003cbr\u003e6.3.4 Stabilisers\u003cbr\u003e6.3.5 Lubricants\u003cbr\u003e6.3.6 Typical Formulations\u003cbr\u003e6.4 Properties\u003cbr\u003e6.5 Novel Processes and Applications\u003cbr\u003e6.5.1 Recycling\u003cbr\u003e6.5.2 Microcellular Foam\u003cbr\u003e6.5.3 Foamed Composites\u003cbr\u003e6.6 Summary\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e7 Flexible PVC Foams (Chris Howick, EVC)\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Flexible Foam Types and PVC Types\u003cbr\u003e7.2.1 Flexible Foams Based on Suspension PVC\u003cbr\u003e7.2.2 Flexible Foams Based on Dispersion or Paste Resins\u003cbr\u003e7.2.3 Chemically Blown Foams from PVC Plastisols: Fundamentals\u003cbr\u003e7.2.4 PVC Resins used in Plastisol Foam Formation\u003cbr\u003e7.2.5 Mineral Fillers\u003cbr\u003e7.2.6 Pigments\u003cbr\u003e7.2.7 Liquid Plasticiser\u003cbr\u003e7.2.8 Blowing Agent Type and Level\u003cbr\u003e7.3 Products Utilising Foamed Plastisols\u003cbr\u003e7.3.1 Floorings and Carpet Backings\u003cbr\u003e7.3.2 Wallcoverings\u003cbr\u003e7.3.3 Synthetic Leather\u003cbr\u003e7.3.4 General Foams\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e8 Polyolefin Foams (David Eaves, Independent Consultant)\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Manufacturing Processes and Materials\u003cbr\u003e8.2.1 Extruded Non-Crosslinked Foam\u003cbr\u003e8.2.2 Expanded (Non-Crosslinked) Polyolefin Beads\u003cbr\u003e8.2.3 Extruded Crosslinked Foam - Processes\u003cbr\u003e8.2.4 Press Moulded Crosslinked Foam Process\u003cbr\u003e8.2.5 Injection Moulded Foam Process\u003cbr\u003e8.2.6 The Nitrogen Autoclave Process\u003cbr\u003e8.2.7 Recycling Processes\u003cbr\u003e8.2.8 Post Manufacturing Operations\u003cbr\u003e8.3 Properties of Polyolefin Foams\u003cbr\u003e8.4 Applications\u003cbr\u003e8.5 Foam Specifications\u003cbr\u003e8.5.1 Packaging\u003cbr\u003e8.5.2 Automotive\u003cbr\u003e8.5.3 Furnishings\u003cbr\u003e8.5.4 Buoyancy\u003cbr\u003e8.5.5 Aerospace\u003cbr\u003e8.5.6 Construction\u003cbr\u003e8.5.7 Toys\u003cbr\u003e8.5.8 Food contact\u003cbr\u003e8.6 Markets\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e9 Latex Foam (Rani Joseph, Cochin University)\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Dunlop Process\u003cbr\u003e9.2.1 Batch Process\u003cbr\u003e9.2.2 Selecting a Formulation for Latex Compounds\u003cbr\u003e9.2.3 Selection of Other Compounding Ingredients\u003cbr\u003e9.2.4 Continuous Process for Latex Foam Production\u003cbr\u003e9.3 Talalay Process\u003cbr\u003e9.4 Trouble Shooting in Latex Foam Manufacture\u003cbr\u003e9.5 Testing\u003cbr\u003e9.5.1 Compression Set\u003cbr\u003e9.5.2 Indentation Hardness\u003cbr\u003e9.5.3 Flexing Resistance\u003cbr\u003e9.5.4 Density\u003cbr\u003e9.5.5 Metallic Impurities\u003cbr\u003e9.6 Important Uses of Latex Foam\u003cbr\u003e9.6.1 Transportation\u003cbr\u003e9.6.2 Furniture\u003cbr\u003e9.6.3 Special Uses\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e10 Microcellular Foams (Vipin Kumar, University of Washington \u0026amp; Krishna Nadella, University of Washington)\u003cbr\u003e10.1 Introduction\u003cbr\u003e10.2 Processing of Microcellular Foams\u003cbr\u003e10.2.1 The Solid-State Batch Process\u003cbr\u003e10.2.2 The Semi-Continuous Process\u003cbr\u003e10.2.3 Extrusion and other Processing Methods\u003cbr\u003e10.3 Properties of Microcellular Foams\u003cbr\u003e10.4 Current Research Directions\u003cbr\u003e10.4.1 Microcellular Materials for Construction\u003cbr\u003e11.4.2 Open-Cell (Porous) Microcellular Foams\u003cbr\u003e10.4.3 Sub-Micron Foams and Nanofoams\u003cbr\u003e10.5 Commercial Opportunities\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDavid Eaves studied polymer chemistry at the University in Birmingham and completed his doctorate in 1958. He then joined Dunlop in their Central Research and Development Laboratories in Birmingham, later going out to Ireland (Cork) and Japan (Kobe) to establish and manage overseas satellite research centres. In 1984 he left Dunlop and joined BP Chemicals' polyethylene foam operation in Croydon as Technical Manager. He was part of the management buy-out team in 1992 when the company was renamed 'Zotefoams', and retired in 1998 as Technical Director. He has published many papers on aspects of polymer and polymer foam technology and is the author of the Rapra report 'Polymer Foams: Trends in Use and Technology.","published_at":"2017-06-22T21:13:18-04:00","created_at":"2017-06-22T21:13:19-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2004","aerospace","automotive","blends","blowing agents","book","construction","fire","foams","food","furnishing","hydrocarbons","inert gases","insulation","molding","moulding","p-structural","packaging","polymer","polymers","polystyrene","properties","recycling","structure","toys"],"price":19000,"price_min":19000,"price_max":19000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378350212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymer Foams","public_title":null,"options":["Default Title"],"price":19000,"weight":1000,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-388-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663","options":["Title"],"media":[{"alt":null,"id":355732226141,"position":1,"preview_image":{"aspect_ratio":0.701,"height":499,"width":350,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663"},"aspect_ratio":0.701,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-388-4.jpg?v=1499442663","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: David Eaves \u003cbr\u003eISBN 978-1-85957-388-6 \u003cbr\u003e\u003cbr\u003epages 274\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe use of polymer foams is extremely widespread. Indeed, it is hard to think of any industries where polymer foams do not have a part to play. They can be found for example in sports and leisure products, in military applications, in vehicles, in aircraft, and in the home. Most people will encounter polymer foams every day in one form or another, whether it be in furniture, in packaging, in their car, in refrigerator insulation, or in some other common application. \u003cbr\u003e\u003cbr\u003eAlthough naturally occurring polymer foams have been known for a long time, (e.g., sponges, cork), synthetic polymer foams have only been introduced to the market over the last fifty years or so. The development of a new polymer has usually been quickly followed by its production in an expanded or foam form owing to the unique and useful properties, which can be realised in the expanded state. \u003cbr\u003e\u003cbr\u003eThis Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers, blowing agents having undergone considerable change and development in recent years in order to meet the requirements of the Montreal Protocol in relation to the reduction and elimination of chloroflurocarbons (CFC) and other ozone depleting agents. A chapter is also included on microcellular foams - a relatively new development where applications are still being explored. Most chapters have references to facilitate further exploration of the topics. The chapters are all written by experts in the field. \u003cbr\u003e\u003cbr\u003eThis book will be of interest to those just embarking upon an exploration of the subject of foams, whether in industry or academia. But this will be equally useful to those already working in the field, who need to know about different types of foam.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface \u003cbr\u003e1 Foam Fundamentals (David Eaves, Independent Consultant)\u003cbr\u003e1.1 Introduction\u003cbr\u003e1.2 Foam Structure\u003cbr\u003e1.3 Foam Properties\u003cbr\u003e1.3.1 Compression Properties\u003cbr\u003e1.3.2 Energy Absorption Properties\u003cbr\u003e1.3.3 Thermal Properties\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e2 Blowing Agents (Sachida Singh, Huntsman Polyurethanes)\u003cbr\u003e2.1 Introduction\u003cbr\u003e2.2 Physical Blowing Agents\u003cbr\u003e2.2.1 Selection Criteria for Physical Blowing Agents\u003cbr\u003e2.2.2 Halogenated Hydrocarbons\u003cbr\u003e2.2.3 Hydrocarbons (HC)\u003cbr\u003e2.2.4 Inert Gases\u003cbr\u003e2.2.5 Other Physical Blowing Agents\u003cbr\u003e2.2.6 Blends of Physical Blowing Agents\u003cbr\u003e2.2.7 Encapsulated Physical Blowing Agents\u003cbr\u003e2.2.8 Physical Blowing Agent by Foam Type and Application\u003cbr\u003e2.3 Chemical Blowing Agents\u003cbr\u003e2.3.1 Selection Criteria for Chemical Blowing Agent\u003cbr\u003e2.3.2 Exothermic CBA\u003cbr\u003e2.3.3 Endothermic CBA\u003cbr\u003e2.3.4 Endo\/Exo Blends\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e3 Expanded Polystyrene: Development, Processing, Applications and Key Issues (Andrew Barnetson, BPF)\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.1.1 Development of Expanded Polystyrene (EPS)\u003cbr\u003e3.2 Manufacture of Expanded Polystyrene Mouldings\u003cbr\u003e3.3 Applications for Expanded Polystyrene Packaging\u003cbr\u003e3.3.1 Packaging\u003cbr\u003e3.3.2 Construction\u003cbr\u003e3.3.3 Other Applications\u003cbr\u003e3.3.4 Novel Applications\u003cbr\u003e3.4 Properties of EPS\u003cbr\u003e3.4.1 Mechanical Performance\u003cbr\u003e3.4.2 Thermal Insulation\u003cbr\u003e3.4.3 Chemical Properties\u003cbr\u003e3.4.4 Recent Research on Properties of EPS: Value for Fruit and Vegetables\u003cbr\u003e3.5 Global Structure of Markets and Companies\u003cbr\u003e3.5.1 Europe\u003cbr\u003e3.5.2 Asia\u003cbr\u003e3.5.3 USA\u003cbr\u003e3.6 Key Issues Facing the EPS Industry\u003cbr\u003e3.6.1 Fire\u003cbr\u003e3.6.2 Recycling\u003cbr\u003e3.6.2 Alternatives to Mechanical Recycling\u003cbr\u003eFurther Information \u003cbr\u003e\u003cbr\u003e4 Rigid Polyurethane Foams (David Eaves, Independent Consultant)\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Materials\u003cbr\u003e4.2.1 Polyols\u003cbr\u003e4.2.2 Isocyanates\u003cbr\u003e4.2.3 Blowing Agents\u003cbr\u003e4.2.4 Other Additives\u003cbr\u003e4.3 Manufacturing Processes for Rigid Polyurethane Foam\u003cbr\u003e4.4 Recycling Processes for Rigid Polyurethane Foam\u003cbr\u003e4.5 Properties of Rigid Polyurethane Foams\u003cbr\u003e4.6 Applications\u003cbr\u003e4.6.1 Applications in Construction\u003cbr\u003e4.6.2 Applications in the Appliance Industry\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e5 Flexible Polyurethane Foam (Tyler Housel, Inolex Chemical Company)\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Chemistry\u003cbr\u003e5.3 Starting Materials\u003cbr\u003e5.3.1 Isocyanate\u003cbr\u003e5.3.2 Polyol\u003cbr\u003e5.3.3 Water\u003cbr\u003e5.3.4 Surfactant\u003cbr\u003e5.3.5 Catalyst\u003cbr\u003e5.3.6 Colorants\u003cbr\u003e5.3.7 Antioxidants\u003cbr\u003e5.3.8 Light Stabilisers\u003cbr\u003e5.3.9 Flame Retardants\u003cbr\u003e5.3.10 Adhesion Promoters\u003cbr\u003e5.3.11 Other Additives\u003cbr\u003e5.4 The Foaming Process\u003cbr\u003e5.4.1 Raw Material Conditioning\u003cbr\u003e5.4.2 Mixing\u003cbr\u003e5.4.3 Growth\u003cbr\u003e5.4.4 Cell Opening\u003cbr\u003e5.4.5 Cure\u003cbr\u003e5.5 Manufacturing Equipment\u003cbr\u003e5.5.1 Storage and Delivery\u003cbr\u003e5.5.2 Mixing\u003cbr\u003e5.5.3 Foam Rise and Cure\u003cbr\u003e5.5.4 Innovations\u003cbr\u003e5.6 Foam Characterisation\u003cbr\u003e5.6.1 Density\u003cbr\u003e5.6.2 Hardness\u003cbr\u003e5.6.3 Resilience\u003cbr\u003e5.6.4 Porosity\u003cbr\u003e5.6.5 Strength Properties\u003cbr\u003e5.6.6 Cell Structure\u003cbr\u003e5.6.7 Environmental Stability\u003cbr\u003e5.6.8 Fatigue\u003cbr\u003e5.6.9 Compression Set\u003cbr\u003e5.6.10 Flammability\u003cbr\u003e5.7 FPF Markets\u003cbr\u003e5.7.1 Transportation\u003cbr\u003e5.7.2 Comfort\u003cbr\u003e5.7.3 Carpet Cushion\u003cbr\u003e5.7.4 Packaging\u003cbr\u003e5.7.5 Specialty Applications\u003cbr\u003e5.8 Environmental Issues\u003cbr\u003e5.9 Organisations\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e6 Rigid PVC Foam (Noreen Thomas, University of Loughborough)\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Foam Extrusion\u003cbr\u003e6.2.1 Basic Principles\u003cbr\u003e6.2.2 Extrusion Processes\u003cbr\u003e6.2.3 Effect of Processing Conditions\u003cbr\u003e6.3 Foam Formulation Technology\u003cbr\u003e6.3.1 Blowing Agents\u003cbr\u003e6.3.2 Processing Aids\u003cbr\u003e6.3.3 Type of PVC\u003cbr\u003e6.3.4 Stabilisers\u003cbr\u003e6.3.5 Lubricants\u003cbr\u003e6.3.6 Typical Formulations\u003cbr\u003e6.4 Properties\u003cbr\u003e6.5 Novel Processes and Applications\u003cbr\u003e6.5.1 Recycling\u003cbr\u003e6.5.2 Microcellular Foam\u003cbr\u003e6.5.3 Foamed Composites\u003cbr\u003e6.6 Summary\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e7 Flexible PVC Foams (Chris Howick, EVC)\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Flexible Foam Types and PVC Types\u003cbr\u003e7.2.1 Flexible Foams Based on Suspension PVC\u003cbr\u003e7.2.2 Flexible Foams Based on Dispersion or Paste Resins\u003cbr\u003e7.2.3 Chemically Blown Foams from PVC Plastisols: Fundamentals\u003cbr\u003e7.2.4 PVC Resins used in Plastisol Foam Formation\u003cbr\u003e7.2.5 Mineral Fillers\u003cbr\u003e7.2.6 Pigments\u003cbr\u003e7.2.7 Liquid Plasticiser\u003cbr\u003e7.2.8 Blowing Agent Type and Level\u003cbr\u003e7.3 Products Utilising Foamed Plastisols\u003cbr\u003e7.3.1 Floorings and Carpet Backings\u003cbr\u003e7.3.2 Wallcoverings\u003cbr\u003e7.3.3 Synthetic Leather\u003cbr\u003e7.3.4 General Foams\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e8 Polyolefin Foams (David Eaves, Independent Consultant)\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.2 Manufacturing Processes and Materials\u003cbr\u003e8.2.1 Extruded Non-Crosslinked Foam\u003cbr\u003e8.2.2 Expanded (Non-Crosslinked) Polyolefin Beads\u003cbr\u003e8.2.3 Extruded Crosslinked Foam - Processes\u003cbr\u003e8.2.4 Press Moulded Crosslinked Foam Process\u003cbr\u003e8.2.5 Injection Moulded Foam Process\u003cbr\u003e8.2.6 The Nitrogen Autoclave Process\u003cbr\u003e8.2.7 Recycling Processes\u003cbr\u003e8.2.8 Post Manufacturing Operations\u003cbr\u003e8.3 Properties of Polyolefin Foams\u003cbr\u003e8.4 Applications\u003cbr\u003e8.5 Foam Specifications\u003cbr\u003e8.5.1 Packaging\u003cbr\u003e8.5.2 Automotive\u003cbr\u003e8.5.3 Furnishings\u003cbr\u003e8.5.4 Buoyancy\u003cbr\u003e8.5.5 Aerospace\u003cbr\u003e8.5.6 Construction\u003cbr\u003e8.5.7 Toys\u003cbr\u003e8.5.8 Food contact\u003cbr\u003e8.6 Markets\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e9 Latex Foam (Rani Joseph, Cochin University)\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Dunlop Process\u003cbr\u003e9.2.1 Batch Process\u003cbr\u003e9.2.2 Selecting a Formulation for Latex Compounds\u003cbr\u003e9.2.3 Selection of Other Compounding Ingredients\u003cbr\u003e9.2.4 Continuous Process for Latex Foam Production\u003cbr\u003e9.3 Talalay Process\u003cbr\u003e9.4 Trouble Shooting in Latex Foam Manufacture\u003cbr\u003e9.5 Testing\u003cbr\u003e9.5.1 Compression Set\u003cbr\u003e9.5.2 Indentation Hardness\u003cbr\u003e9.5.3 Flexing Resistance\u003cbr\u003e9.5.4 Density\u003cbr\u003e9.5.5 Metallic Impurities\u003cbr\u003e9.6 Important Uses of Latex Foam\u003cbr\u003e9.6.1 Transportation\u003cbr\u003e9.6.2 Furniture\u003cbr\u003e9.6.3 Special Uses\u003cbr\u003eReferences \u003cbr\u003e\u003cbr\u003e10 Microcellular Foams (Vipin Kumar, University of Washington \u0026amp; Krishna Nadella, University of Washington)\u003cbr\u003e10.1 Introduction\u003cbr\u003e10.2 Processing of Microcellular Foams\u003cbr\u003e10.2.1 The Solid-State Batch Process\u003cbr\u003e10.2.2 The Semi-Continuous Process\u003cbr\u003e10.2.3 Extrusion and other Processing Methods\u003cbr\u003e10.3 Properties of Microcellular Foams\u003cbr\u003e10.4 Current Research Directions\u003cbr\u003e10.4.1 Microcellular Materials for Construction\u003cbr\u003e11.4.2 Open-Cell (Porous) Microcellular Foams\u003cbr\u003e10.4.3 Sub-Micron Foams and Nanofoams\u003cbr\u003e10.5 Commercial Opportunities\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDavid Eaves studied polymer chemistry at the University in Birmingham and completed his doctorate in 1958. He then joined Dunlop in their Central Research and Development Laboratories in Birmingham, later going out to Ireland (Cork) and Japan (Kobe) to establish and manage overseas satellite research centres. In 1984 he left Dunlop and joined BP Chemicals' polyethylene foam operation in Croydon as Technical Manager. He was part of the management buy-out team in 1992 when the company was renamed 'Zotefoams', and retired in 1998 as Technical Director. He has published many papers on aspects of polymer and polymer foam technology and is the author of the Rapra report 'Polymer Foams: Trends in Use and Technology."}
Description Author: B.D. Malhotra ISBN 978-1-85957-286-3 pages: 474 Summary With the continuing drive for higher circuit density and very high-speed data processing, the search for new polymeric materials to use in microelectronics has intensified. The development of polymers for electronics applications is an open field wherein polymers may be used as insulating materials or tailored for...
$270.00
in stock
{"id":11242211716,"title":"Handbook of Polymers in Electronics","handle":"978-1-85957-286-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: B.D. Malhotra \u003cbr\u003eISBN 978-1-85957-286-3 \u003cbr\u003e\u003cbr\u003epages: 474\n\u003ch5\u003eSummary\u003c\/h5\u003e\nWith the continuing drive for higher circuit density and very high-speed data processing, the search for new polymeric materials to use in microelectronics has intensified. The development of polymers for electronics applications is an open field wherein polymers may be used as insulating materials or tailored for desired electronic properties for specific applications. Conjugated polymers have been projected to have numerous applications and are presently at centre-stage of R\u0026amp;D. \u003cbr\u003e\u003cbr\u003eThe Handbook of Polymers in Electronics has been designed to discuss the novel ways in which polymers can be used in the rapidly growing electronics industry. It provides a discussion of the preparation and characterisation of suitable polymeric materials and their current and potential applications coupled with the fundamentals of electrical, optical and photophysical properties. It will thus serve the needs of those already active in the electronics field as well as new entrants to the industry. \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Charge Transport in Conjugated Polymers \u003cbr\u003e2. Electrical Properties of Doped Conjugated Polymers \u003cbr\u003e3. Non Linear Optical Properties of Polymers for Electronics \u003cbr\u003e4. Luminescence Studies of Polymers \u003cbr\u003e5. Polymers for Light Emitting Diodes \u003cbr\u003e6. Photopolymers and Photoresists for Electronics \u003cbr\u003e7. Polymer Batteries for Electronics \u003cbr\u003e8. Polymer Microactuators \u003cbr\u003e9. Membranes for Electronics \u003cbr\u003e10. Conducting Polymer-Based Biosensors \u003cbr\u003e11. Nanoparticle-Dispersed Semiconducting Polymers for Electronics \u003cbr\u003e12. Polymers for Electronics \u003cbr\u003e13. Conducting Polymers in Molecular Electronics\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nBansi Dhar Malhotra is Scientist-in-Charge at the Biomolecular Electronics \u0026amp; Conducting Research Group, National Physical Laboratory, New Delhi, India. He is presently engaged in an R\u0026amp;D programme on conducting polymers, biosensors, Langmuir Blodgett films and molecular electronics. He is the author of more than 50 research papers and has been invited to speak at many international conferences.","published_at":"2017-06-22T21:13:13-04:00","created_at":"2017-06-22T21:13:13-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","batteries","biosensors","book","charge transport","electrical properties","light-emitting diodes","luminescence","membranes","microactuators","molecular electronics","non-linear optical properties","optical properties","p-applications","photo resists","polymer","polymers","semiconducting"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378337348,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Handbook of Polymers in Electronics","public_title":null,"options":["Default Title"],"price":27000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-286-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-286-3.jpg?v=1499471738"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-286-3.jpg?v=1499471738","options":["Title"],"media":[{"alt":null,"id":356336336989,"position":1,"preview_image":{"aspect_ratio":0.769,"height":182,"width":140,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-286-3.jpg?v=1499471738"},"aspect_ratio":0.769,"height":182,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-286-3.jpg?v=1499471738","width":140}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: B.D. Malhotra \u003cbr\u003eISBN 978-1-85957-286-3 \u003cbr\u003e\u003cbr\u003epages: 474\n\u003ch5\u003eSummary\u003c\/h5\u003e\nWith the continuing drive for higher circuit density and very high-speed data processing, the search for new polymeric materials to use in microelectronics has intensified. The development of polymers for electronics applications is an open field wherein polymers may be used as insulating materials or tailored for desired electronic properties for specific applications. Conjugated polymers have been projected to have numerous applications and are presently at centre-stage of R\u0026amp;D. \u003cbr\u003e\u003cbr\u003eThe Handbook of Polymers in Electronics has been designed to discuss the novel ways in which polymers can be used in the rapidly growing electronics industry. It provides a discussion of the preparation and characterisation of suitable polymeric materials and their current and potential applications coupled with the fundamentals of electrical, optical and photophysical properties. It will thus serve the needs of those already active in the electronics field as well as new entrants to the industry. \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Charge Transport in Conjugated Polymers \u003cbr\u003e2. Electrical Properties of Doped Conjugated Polymers \u003cbr\u003e3. Non Linear Optical Properties of Polymers for Electronics \u003cbr\u003e4. Luminescence Studies of Polymers \u003cbr\u003e5. Polymers for Light Emitting Diodes \u003cbr\u003e6. Photopolymers and Photoresists for Electronics \u003cbr\u003e7. Polymer Batteries for Electronics \u003cbr\u003e8. Polymer Microactuators \u003cbr\u003e9. Membranes for Electronics \u003cbr\u003e10. Conducting Polymer-Based Biosensors \u003cbr\u003e11. Nanoparticle-Dispersed Semiconducting Polymers for Electronics \u003cbr\u003e12. Polymers for Electronics \u003cbr\u003e13. Conducting Polymers in Molecular Electronics\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nBansi Dhar Malhotra is Scientist-in-Charge at the Biomolecular Electronics \u0026amp; Conducting Research Group, National Physical Laboratory, New Delhi, India. He is presently engaged in an R\u0026amp;D programme on conducting polymers, biosensors, Langmuir Blodgett films and molecular electronics. He is the author of more than 50 research papers and has been invited to speak at many international conferences."}
Description George WypychISBN 978-1- 927885-95-6 Publication: January 2022Pages: 744+vi Summary Polymers selected for this edition of the Handbook of Polymers include all primary polymeric materials used by the plastics and other branches of the chemical industry and specialty polymers used in the electronics, pharmaceutical, medical, and space fields. Extensive information is included on biopolymers.The data...
$455.00
in stock
{"id":7336409235613,"title":"Handbook of Polymers, 3rd Edition","handle":"handbook-of-polymers-3rd-edition","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eGeorge Wypych\u003cbr data-mce-fragment=\"1\"\u003eISBN 978-1- 927885-95-6 \u003cbr\u003ePublication: January 2022\u003cbr data-mce-fragment=\"1\"\u003ePages: 744+vi\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003ePolymers selected for this edition of the Handbook of Polymers include all primary polymeric materials used by the plastics and other branches of the chemical industry and specialty polymers used in the electronics, pharmaceutical, medical, and space fields. Extensive information is included on biopolymers.\u003cbr\u003e\u003cbr\u003eThe data included in the Handbook of Polymers come from open literature (published articles, conference papers, and books), literature available from manufacturers of various grades of polymers, plastics, and finished products, and patent literature. The above sources were searched, including the most recent literature. It can be seen from the references that a large portion of the data comes from information published in 2011-2021. This underscores one of this undertaking's significant goals: to provide readers with the most up-to-date information.\u003cbr\u003e\u003cbr\u003eFrequently, data from different sources vary in a broad range, and they have to be reconciled. In such cases, values closest to their average and values based on testing of the most current grades of materials are selected to provide readers with information that is characteristic of currently available products, focusing on the potential use of data in solving practical problems. In this process of verification, many older data were rejected unless recently conducted studies have confirmed them.\u003cbr\u003e\u003cbr\u003eThe presentation of data for all polymers is based on a consistent pattern of data arrangement, although, depending on data availability, only data fields that contain actual values are included for each polymer. The entire scope of the data is divided into sections to make data comparison and search easy. \u003cbr\u003e\u003cbr\u003eThe data are organized into the following sections:\u003cbr\u003e• General (Common name, IUPAC name, ACS name, Acronym, CAS number, EC number, RTECS number, Linear formula)\u003cbr\u003e• History (Person to discover, Date, Details)\u003cbr\u003e• Synthesis (Monomer(s) structure, Monomer(s) CAS number(s), Monomer(s) molecular weight(s), Monomer(s) expected purity(ies), Monomer ratio, Degree of substitution, Formulation example, Method of synthesis, Temperature of polymerization, Time of polymerization, Pressure of polymerization, Catalyst, Yield, Activation energy of polymerization, Free enthalpy of formation, Heat of polymerization, Initiation rate constant, Propagation rate constant, Termination rate constant, Chain transfer rate constant, Inhibition rate constant, Polymerization rate constant, Method of polymer separation, Typical impurities, Typical concentration of residual monomer, Number average molecular weight, Mn, Mass average molecular weight, Mw, Polydispersity, Mw\/Mn, Polymerization degree, Molar volume at 298K, Molar volume at the melting point, Van der Waals volume, Radius of gyration, End-to-end distance of unperturbed polymer chain, Degree of branching, Type of branching, Chain-end groups)\u003cbr\u003e• Structure (Crystallinity, Crystalline structure, Cell type (lattice), Cell dimensions, Unit cell angles, Number of chains per unit cell, Crystallite size, Spacing between crystallites, Polymorphs, Tacticity, Cis content, Chain conformation, Entanglement molecular weight, Lamellae thickness, Heat of crystallization, Rapid crystallization temperature, Avrami constants, k\/n)\u003cbr\u003e• Commercial polymers (Some manufacturers, Trade names, Composition information)\u003cbr\u003e• Physical properties (Density, Bulk density, Color, Refractive index, Birefringence, Molar polarizability, Transmittance, Haze, Gloss, Odor, Melting temperature, Softening point, Decomposition temperature, Fusion temperature, Thermal expansion coefficient, Thermal conductivity, Glass transition temperature, Specific heat capacity, Heat of fusion, Calorific value, Maximum service temperature, Long term service temperature, Temperature index (50% tensile strength loss after 20,000 h\/5000 h), Heat deflection temperature at 0.45 MPa, Heat deflection temperature at 1.8 MPa, Vicat temperature VST\/A\/50, Vicat temperature VST\/B\/50, Start of thermal degradation, Enthalpy, Acceptor number, Donor number, Hansen solubility parameters, dD, dP, dH, Molar volume, Hildebrand solubility parameter, Surface tension, Dielectric constant at 100 Hz\/1 MHz, Dielectric loss factor at 1 kHz, Relative permittivity at 100 Hz, Relative permittivity at 1 MHz, Dissipation factor at 100 Hz, Dissipation factor at 1 MHz, Volume resistivity, Surface resistivity, Electric strength K20\/P50, d=0.60.8 mm, Comparative tracking index, CTI, test liquid A, Comparative tracking index, CTIM, test liquid B, Arc resistance, Power factor, Coefficient of friction, Permeability to nitrogen, Permeability to oxygen, Permeability to water vapor, Diffusion coefficient of nitrogen, Diffusion coefficient of oxygen, Diffusion coefficient of water vapor, Contact angle of water, Surface free energy, Speed of sound, Acoustic impedance, Attenuation)\u003cbr\u003e• Mechanical properties (Tensile strength, Tensile modulus, Tensile stress at yield, Tensile creep modulus, 1000 h, elongation 0.5 max, Elongation, Tensile yield strain, Flexural strength, Flexural modulus, Elastic modulus, Compressive strength, Young's modulus, Tear strength, Charpy impact strength, Charpy impact strength, notched, Izod impact strength, Izod impact strength, notched, Shear strength, Tenacity, Abrasion resistance, Adhesive bond strength, Poisson's ratio, Compression set, Shore A hardness, Shore D hardness, Rockwell hardness, Ball indention hardness at 358 N\/30 S, Shrinkage, Brittleness temperature, Viscosity number, Intrinsic viscosity, Mooney viscosity, Melt viscosity, shear rate=1000 s-1, Melt volume flow rate, Melt index, Water absorption, Moisture absorption)\u003cbr\u003e• Chemical resistance (Acid dilute\/concentrated, Alcohols, Alkalis, Aliphatic hydrocarbons, Aromatic hydrocarbons, Esters, Greases \u0026amp; oils, Halogenated hydrocarbons, Ketones, Theta solvent, Good solvent, Non-solvent)\u003cbr\u003e• Flammability (Flammability according to UL-standard; thickness 1.6\/0.8 mm, Ignition temperature, Autoignition temperature, Limiting oxygen index, Heat release, NBS smoke chamber, Burning rate (Flame spread rate), Char, Heat of combustion, Volatile products of combustion)\u003cbr\u003e• Weather stability (Spectral sensitivity, Activation wavelengths, Excitation wavelengths, Emission wavelengths, Activation energy of photoxidation, Depth of UV penetration, Important initiators and accelerators, Products of degradation, Stabilizers)\u003cbr\u003e• Biodegradation (Typical biodegradants, Stabilizers)\u003cbr\u003e• Toxicity (NFPA: Health, Flammability, Reactivity rating, Carcinogenic effect, Mutagenic effect, Teratogenic effect, Reproductive toxicity, TLV, ACGIH, NIOSH, MAK\/TRK, OSHA, Acceptable daily intake, Oral rat, LD50, Skin rabbit, LD50)\u003cbr\u003e• Environmental impact (Aquatic toxicity, Daphnia magna, LC50, 48 h, Aquatic toxicity, Bluegill sunfish, LC50, 48 h, Aquatic toxicity, Fathead minnow, LC50, 48 h, Aquatic toxicity, Rainbow trout, LC50, 48 h, Mean degradation half-life, Toxic products of degradation, Biological oxygen demand, BOD5, Chemical oxygen demand, Theoretical oxygen demand, Cradle to grave non-renewable energy use)\u003cbr\u003e• Processing (Typical processing methods, Preprocess drying: temperature\/time\/residual moisture, Processing temperature, Processing pressure, Process time, Additives used in final products, Applications, Outstanding properties)\u003cbr\u003e• Blends (Suitable polymers, Compatibilizers)\u003cbr\u003e• Analysis (FTIR (wavenumber-assignment), Raman (wavenumber-assignment), NMR (chemical shifts), x-ray diffraction peaks)\u003cbr\u003e\u003cbr\u003eIt can be anticipated from the above breakdown of information that the Handbook of Polymers contains information on all essential data used in practical applications, research, and legislation, providing that such data are available for a particular material. In total, over 230 different types of data were searched for each individual polymer. The last number does not include special fields that might be added to characterize specialty polymers' performance in their applications.\u003cbr\u003e\u003cbr\u003eWe hope that our thorough search of data will be useful and that users of this book will skillfully apply the data to benefit their research and applications.\u003cbr\u003e\u003cbr\u003eThe contents, scope, treatment of the data (comparison of data from different sources and their qualification), and novelty of the data qualifies the book to be found on the desk of anyone working with polymeric materials.\u003cbr\u003ePolymeric materials used in electronics require special sets of data for various applications. These materials are the most frequently compounded plastics, containing suitable additives to achieve the required set of properties. Those who are interested in these materials should also consider the recently published Handbook of Polymers in Electronics. \u003cbr\u003e\u003c\/p\u003e","published_at":"2022-03-31T21:01:23-04:00","created_at":"2022-03-31T20:57:34-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2022","best","book","material","Materials","polymer","polymers"],"price":45500,"price_min":45500,"price_max":45500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42165789098141,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Handbook of Polymers, 3rd Edition","public_title":null,"options":["Default Title"],"price":45500,"weight":1000,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1- 927885-95-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/9781927885956-Case.png?v=1648774870"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/9781927885956-Case.png?v=1648774870","options":["Title"],"media":[{"alt":null,"id":24734620844189,"position":1,"preview_image":{"aspect_ratio":0.658,"height":450,"width":296,"src":"\/\/chemtec.org\/cdn\/shop\/products\/9781927885956-Case.png?v=1648774870"},"aspect_ratio":0.658,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/9781927885956-Case.png?v=1648774870","width":296}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eGeorge Wypych\u003cbr data-mce-fragment=\"1\"\u003eISBN 978-1- 927885-95-6 \u003cbr\u003ePublication: January 2022\u003cbr data-mce-fragment=\"1\"\u003ePages: 744+vi\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003ePolymers selected for this edition of the Handbook of Polymers include all primary polymeric materials used by the plastics and other branches of the chemical industry and specialty polymers used in the electronics, pharmaceutical, medical, and space fields. Extensive information is included on biopolymers.\u003cbr\u003e\u003cbr\u003eThe data included in the Handbook of Polymers come from open literature (published articles, conference papers, and books), literature available from manufacturers of various grades of polymers, plastics, and finished products, and patent literature. The above sources were searched, including the most recent literature. It can be seen from the references that a large portion of the data comes from information published in 2011-2021. This underscores one of this undertaking's significant goals: to provide readers with the most up-to-date information.\u003cbr\u003e\u003cbr\u003eFrequently, data from different sources vary in a broad range, and they have to be reconciled. In such cases, values closest to their average and values based on testing of the most current grades of materials are selected to provide readers with information that is characteristic of currently available products, focusing on the potential use of data in solving practical problems. In this process of verification, many older data were rejected unless recently conducted studies have confirmed them.\u003cbr\u003e\u003cbr\u003eThe presentation of data for all polymers is based on a consistent pattern of data arrangement, although, depending on data availability, only data fields that contain actual values are included for each polymer. The entire scope of the data is divided into sections to make data comparison and search easy. \u003cbr\u003e\u003cbr\u003eThe data are organized into the following sections:\u003cbr\u003e• General (Common name, IUPAC name, ACS name, Acronym, CAS number, EC number, RTECS number, Linear formula)\u003cbr\u003e• History (Person to discover, Date, Details)\u003cbr\u003e• Synthesis (Monomer(s) structure, Monomer(s) CAS number(s), Monomer(s) molecular weight(s), Monomer(s) expected purity(ies), Monomer ratio, Degree of substitution, Formulation example, Method of synthesis, Temperature of polymerization, Time of polymerization, Pressure of polymerization, Catalyst, Yield, Activation energy of polymerization, Free enthalpy of formation, Heat of polymerization, Initiation rate constant, Propagation rate constant, Termination rate constant, Chain transfer rate constant, Inhibition rate constant, Polymerization rate constant, Method of polymer separation, Typical impurities, Typical concentration of residual monomer, Number average molecular weight, Mn, Mass average molecular weight, Mw, Polydispersity, Mw\/Mn, Polymerization degree, Molar volume at 298K, Molar volume at the melting point, Van der Waals volume, Radius of gyration, End-to-end distance of unperturbed polymer chain, Degree of branching, Type of branching, Chain-end groups)\u003cbr\u003e• Structure (Crystallinity, Crystalline structure, Cell type (lattice), Cell dimensions, Unit cell angles, Number of chains per unit cell, Crystallite size, Spacing between crystallites, Polymorphs, Tacticity, Cis content, Chain conformation, Entanglement molecular weight, Lamellae thickness, Heat of crystallization, Rapid crystallization temperature, Avrami constants, k\/n)\u003cbr\u003e• Commercial polymers (Some manufacturers, Trade names, Composition information)\u003cbr\u003e• Physical properties (Density, Bulk density, Color, Refractive index, Birefringence, Molar polarizability, Transmittance, Haze, Gloss, Odor, Melting temperature, Softening point, Decomposition temperature, Fusion temperature, Thermal expansion coefficient, Thermal conductivity, Glass transition temperature, Specific heat capacity, Heat of fusion, Calorific value, Maximum service temperature, Long term service temperature, Temperature index (50% tensile strength loss after 20,000 h\/5000 h), Heat deflection temperature at 0.45 MPa, Heat deflection temperature at 1.8 MPa, Vicat temperature VST\/A\/50, Vicat temperature VST\/B\/50, Start of thermal degradation, Enthalpy, Acceptor number, Donor number, Hansen solubility parameters, dD, dP, dH, Molar volume, Hildebrand solubility parameter, Surface tension, Dielectric constant at 100 Hz\/1 MHz, Dielectric loss factor at 1 kHz, Relative permittivity at 100 Hz, Relative permittivity at 1 MHz, Dissipation factor at 100 Hz, Dissipation factor at 1 MHz, Volume resistivity, Surface resistivity, Electric strength K20\/P50, d=0.60.8 mm, Comparative tracking index, CTI, test liquid A, Comparative tracking index, CTIM, test liquid B, Arc resistance, Power factor, Coefficient of friction, Permeability to nitrogen, Permeability to oxygen, Permeability to water vapor, Diffusion coefficient of nitrogen, Diffusion coefficient of oxygen, Diffusion coefficient of water vapor, Contact angle of water, Surface free energy, Speed of sound, Acoustic impedance, Attenuation)\u003cbr\u003e• Mechanical properties (Tensile strength, Tensile modulus, Tensile stress at yield, Tensile creep modulus, 1000 h, elongation 0.5 max, Elongation, Tensile yield strain, Flexural strength, Flexural modulus, Elastic modulus, Compressive strength, Young's modulus, Tear strength, Charpy impact strength, Charpy impact strength, notched, Izod impact strength, Izod impact strength, notched, Shear strength, Tenacity, Abrasion resistance, Adhesive bond strength, Poisson's ratio, Compression set, Shore A hardness, Shore D hardness, Rockwell hardness, Ball indention hardness at 358 N\/30 S, Shrinkage, Brittleness temperature, Viscosity number, Intrinsic viscosity, Mooney viscosity, Melt viscosity, shear rate=1000 s-1, Melt volume flow rate, Melt index, Water absorption, Moisture absorption)\u003cbr\u003e• Chemical resistance (Acid dilute\/concentrated, Alcohols, Alkalis, Aliphatic hydrocarbons, Aromatic hydrocarbons, Esters, Greases \u0026amp; oils, Halogenated hydrocarbons, Ketones, Theta solvent, Good solvent, Non-solvent)\u003cbr\u003e• Flammability (Flammability according to UL-standard; thickness 1.6\/0.8 mm, Ignition temperature, Autoignition temperature, Limiting oxygen index, Heat release, NBS smoke chamber, Burning rate (Flame spread rate), Char, Heat of combustion, Volatile products of combustion)\u003cbr\u003e• Weather stability (Spectral sensitivity, Activation wavelengths, Excitation wavelengths, Emission wavelengths, Activation energy of photoxidation, Depth of UV penetration, Important initiators and accelerators, Products of degradation, Stabilizers)\u003cbr\u003e• Biodegradation (Typical biodegradants, Stabilizers)\u003cbr\u003e• Toxicity (NFPA: Health, Flammability, Reactivity rating, Carcinogenic effect, Mutagenic effect, Teratogenic effect, Reproductive toxicity, TLV, ACGIH, NIOSH, MAK\/TRK, OSHA, Acceptable daily intake, Oral rat, LD50, Skin rabbit, LD50)\u003cbr\u003e• Environmental impact (Aquatic toxicity, Daphnia magna, LC50, 48 h, Aquatic toxicity, Bluegill sunfish, LC50, 48 h, Aquatic toxicity, Fathead minnow, LC50, 48 h, Aquatic toxicity, Rainbow trout, LC50, 48 h, Mean degradation half-life, Toxic products of degradation, Biological oxygen demand, BOD5, Chemical oxygen demand, Theoretical oxygen demand, Cradle to grave non-renewable energy use)\u003cbr\u003e• Processing (Typical processing methods, Preprocess drying: temperature\/time\/residual moisture, Processing temperature, Processing pressure, Process time, Additives used in final products, Applications, Outstanding properties)\u003cbr\u003e• Blends (Suitable polymers, Compatibilizers)\u003cbr\u003e• Analysis (FTIR (wavenumber-assignment), Raman (wavenumber-assignment), NMR (chemical shifts), x-ray diffraction peaks)\u003cbr\u003e\u003cbr\u003eIt can be anticipated from the above breakdown of information that the Handbook of Polymers contains information on all essential data used in practical applications, research, and legislation, providing that such data are available for a particular material. In total, over 230 different types of data were searched for each individual polymer. The last number does not include special fields that might be added to characterize specialty polymers' performance in their applications.\u003cbr\u003e\u003cbr\u003eWe hope that our thorough search of data will be useful and that users of this book will skillfully apply the data to benefit their research and applications.\u003cbr\u003e\u003cbr\u003eThe contents, scope, treatment of the data (comparison of data from different sources and their qualification), and novelty of the data qualifies the book to be found on the desk of anyone working with polymeric materials.\u003cbr\u003ePolymeric materials used in electronics require special sets of data for various applications. These materials are the most frequently compounded plastics, containing suitable additives to achieve the required set of properties. Those who are interested in these materials should also consider the recently published Handbook of Polymers in Electronics. \u003cbr\u003e\u003c\/p\u003e"}