- Grid List
Filter
Encyclopedia of Polyme...
$350.00
{"id":8325682987165,"title":"Encyclopedia of Polymer Degradation","handle":"encyclopedia-of-polymer-degradation","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN 978-1-77467-048-4\u003cbr\u003e\u003cbr\u003eHard copy\u003cbr\u003ePages 240+viii\u003cbr\u003ePublished: Jan 2025\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eThe Encyclopedia takes a different approach to analyzing the effects of degradants on the degradation of materials as compared to the classical methods commonly used in weathering studies. Here are the key points:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eLimitations of Typical Weathering Studies:\u003c\/strong\u003e Conventional weathering studies often take place in natural outdoor environments where weathering parameters are not controlled. This lack of control makes it difficult to separate and understand the individual effects of different degradants on the material. Moreover, exposure sites may be in locations that do not fully represent real-life performance (e.g., no exposure to certain degradants found in urban environments). The resulting sample condition after exposure depends on the combined effects of multiple degradants, and it is hard to repeat or precisely measure all these effects. Also, in many cases, samples are too contaminated to be studied by instrumental methods.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eChallenges in Laboratory Weathering Studies: \u003c\/strong\u003eWeathering studies conducted in laboratory equipment often control specific factors such as UV energy, humidity, artificial rain, and temperature during exposure. However, the studied samples are still exposed to a combination of degradants, making it challenging to isolate the partial effects of individual degradants. The typical approach involves grading damage vs. duration and analyzing composition changes vs. duration of exposure, which does not provide a complete understanding of the mechanisms and interactions among different degradants.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eImportance of Understanding Degradation Mechanisms: \u003c\/strong\u003eTo effectively use different polymeric materials, it is essential to understand the specific mechanisms caused by different degradants. This understanding permits the selection of the most resistant materials for specific applications and the development of effective stabilization strategies to protect materials against degradation. Degradation and stabilization should be described through chemical equations to identify the specific reactions involved and their sequence.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eEncyclopedia's Approach: \u003c\/strong\u003eThe book aims to compile research results for the most important and commonly used polymers. The focus is on identifying the unitary degradative chemical reactions, including the fate of products resulting from primary degradation, which can influence further degradation mechanisms and rates. Based on these data, the book proposes potential mechanisms of reactions (chemical descriptions of the sequence of events) for each degradation mode.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eTransition to Knowledge-Based Utilization:\u003c\/strong\u003e While complete answers may be difficult to provide, the book recognizes the need to start with available data. By shifting from comparative methods to knowledge-based utilization of existing resources, the book aims to facilitate more effective prevention of waste and environmental pollution caused by material failures.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIn summary, the book aims to provide a more comprehensive and mechanistic understanding of material degradation caused by various degradants, helping researchers and professionals select suitable materials and develop effective strategies to prevent degradation and environmental pollution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction. Outdoor stability of materials (life expectance)\u003cbr\u003e2 Testing according to standards. Methods of exposure\u003cbr\u003e3 Testing according to standards. Stability measures\u003cbr\u003e4 Real-life material damage. Typical examples\u003cbr\u003e5 Examples of a combination of degradants for some real materials (encountered degrading\u003cbr\u003e environments, typical polymers used for production, and examples of performance)\u003cbr\u003e5.1 Adhesives and sealants\u003cbr\u003e5.2 Aerospace\u003cbr\u003e5.3 Automotive coatings\u003cbr\u003e5.4 Composites\u003cbr\u003e5.5 Geosynthetics\u003cbr\u003e5.6 Paints and coatings\u003cbr\u003e5.7 Roofing\u003cbr\u003e5.8 Solar cells and collectors\u003cbr\u003e5.9 Textiles\u003cbr\u003e5.10 Wood\u003cbr\u003e6 Polymer degradation. Available data (important data characterizing each polymer, reactions of degradation caused by any degradant known for this particular polymer, sequence of events which is known to be part of degradation mechanism for each degradant affecting polymer, and the major results illustrating mechanisms of degradation, products of degradation, and results of testing.)\u003cbr\u003e6.1 Acrylic resins\u003cbr\u003e6.2 Cellulose \u003cbr\u003e6.3 Epoxy resins\u003cbr\u003e6.4 Ethylene-propylene diene monomer, EPDM\u003cbr\u003e6.5 Fluorinated ethylene-propylene copolymer, FEP\u003cbr\u003e6.6 Polybutadiene\u003cbr\u003e6.7 Polycarbonate\u003cbr\u003e6.8 Polydimethylsiloxane\u003cbr\u003e6.9 Polyethylene\u003cbr\u003e6.10 Poly(ethylene terephthalate)\u003cbr\u003e6.11 Poly(lactic acid)\u003cbr\u003e6.12 Polymethylmethacrylate\u003cbr\u003e6.13 Polyoxymethylene\u003cbr\u003e6.14 Polypropylene\u003cbr\u003e6.15 Polystyrene\u003cbr\u003e6.16 Polytetrafluorethylene\u003cbr\u003e6.17 Polyurethane\u003cbr\u003e6.18 Polyvinylchloride\u003cbr\u003e6.19 Poly(vinylidene chloride)\u003cbr\u003e6.20 Rubber\u003cbr\u003e7 General testing requirements\u003cbr\u003e7.1 What to test\u003cbr\u003e7.2 Methods of study of deterioration rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/p\u003e","published_at":"2024-06-12T09:31:49-04:00","created_at":"2024-06-12T09:06:23-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2025","additives","book","chromatography","extraction techniques","latex polymers","mass spectrometry","monomers","natural synthetic","new","p-testing","plasticisers","plastics","polymer","polymers","rubbers","scanning calorimetry","spectroscopy","stabilisers","testing"],"price":35000,"price_min":35000,"price_max":35000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":45528543592605,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":null,"requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Encyclopedia of Polymer Degradation","public_title":null,"options":["Default Title"],"price":35000,"weight":1000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-77467-048-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209","options":["Title"],"media":[{"alt":null,"id":29565439672477,"position":1,"preview_image":{"aspect_ratio":0.649,"height":450,"width":292,"src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209"},"aspect_ratio":0.649,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/files\/9781774670484-Case02.jpg?v=1718198209","width":292}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: George Wypych\u003cbr\u003eISBN 978-1-77467-048-4\u003cbr\u003e\u003cbr\u003eHard copy\u003cbr\u003ePages 240+viii\u003cbr\u003ePublished: Jan 2025\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp class=\"p1\"\u003eThe Encyclopedia takes a different approach to analyzing the effects of degradants on the degradation of materials as compared to the classical methods commonly used in weathering studies. Here are the key points:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eLimitations of Typical Weathering Studies:\u003c\/strong\u003e Conventional weathering studies often take place in natural outdoor environments where weathering parameters are not controlled. This lack of control makes it difficult to separate and understand the individual effects of different degradants on the material. Moreover, exposure sites may be in locations that do not fully represent real-life performance (e.g., no exposure to certain degradants found in urban environments). The resulting sample condition after exposure depends on the combined effects of multiple degradants, and it is hard to repeat or precisely measure all these effects. Also, in many cases, samples are too contaminated to be studied by instrumental methods.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eChallenges in Laboratory Weathering Studies: \u003c\/strong\u003eWeathering studies conducted in laboratory equipment often control specific factors such as UV energy, humidity, artificial rain, and temperature during exposure. However, the studied samples are still exposed to a combination of degradants, making it challenging to isolate the partial effects of individual degradants. The typical approach involves grading damage vs. duration and analyzing composition changes vs. duration of exposure, which does not provide a complete understanding of the mechanisms and interactions among different degradants.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eImportance of Understanding Degradation Mechanisms: \u003c\/strong\u003eTo effectively use different polymeric materials, it is essential to understand the specific mechanisms caused by different degradants. This understanding permits the selection of the most resistant materials for specific applications and the development of effective stabilization strategies to protect materials against degradation. Degradation and stabilization should be described through chemical equations to identify the specific reactions involved and their sequence.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eEncyclopedia's Approach: \u003c\/strong\u003eThe book aims to compile research results for the most important and commonly used polymers. The focus is on identifying the unitary degradative chemical reactions, including the fate of products resulting from primary degradation, which can influence further degradation mechanisms and rates. Based on these data, the book proposes potential mechanisms of reactions (chemical descriptions of the sequence of events) for each degradation mode.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eTransition to Knowledge-Based Utilization:\u003c\/strong\u003e While complete answers may be difficult to provide, the book recognizes the need to start with available data. By shifting from comparative methods to knowledge-based utilization of existing resources, the book aims to facilitate more effective prevention of waste and environmental pollution caused by material failures.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIn summary, the book aims to provide a more comprehensive and mechanistic understanding of material degradation caused by various degradants, helping researchers and professionals select suitable materials and develop effective strategies to prevent degradation and environmental pollution.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e1 Introduction. Outdoor stability of materials (life expectance)\u003cbr\u003e2 Testing according to standards. Methods of exposure\u003cbr\u003e3 Testing according to standards. Stability measures\u003cbr\u003e4 Real-life material damage. Typical examples\u003cbr\u003e5 Examples of a combination of degradants for some real materials (encountered degrading\u003cbr\u003e environments, typical polymers used for production, and examples of performance)\u003cbr\u003e5.1 Adhesives and sealants\u003cbr\u003e5.2 Aerospace\u003cbr\u003e5.3 Automotive coatings\u003cbr\u003e5.4 Composites\u003cbr\u003e5.5 Geosynthetics\u003cbr\u003e5.6 Paints and coatings\u003cbr\u003e5.7 Roofing\u003cbr\u003e5.8 Solar cells and collectors\u003cbr\u003e5.9 Textiles\u003cbr\u003e5.10 Wood\u003cbr\u003e6 Polymer degradation. Available data (important data characterizing each polymer, reactions of degradation caused by any degradant known for this particular polymer, sequence of events which is known to be part of degradation mechanism for each degradant affecting polymer, and the major results illustrating mechanisms of degradation, products of degradation, and results of testing.)\u003cbr\u003e6.1 Acrylic resins\u003cbr\u003e6.2 Cellulose \u003cbr\u003e6.3 Epoxy resins\u003cbr\u003e6.4 Ethylene-propylene diene monomer, EPDM\u003cbr\u003e6.5 Fluorinated ethylene-propylene copolymer, FEP\u003cbr\u003e6.6 Polybutadiene\u003cbr\u003e6.7 Polycarbonate\u003cbr\u003e6.8 Polydimethylsiloxane\u003cbr\u003e6.9 Polyethylene\u003cbr\u003e6.10 Poly(ethylene terephthalate)\u003cbr\u003e6.11 Poly(lactic acid)\u003cbr\u003e6.12 Polymethylmethacrylate\u003cbr\u003e6.13 Polyoxymethylene\u003cbr\u003e6.14 Polypropylene\u003cbr\u003e6.15 Polystyrene\u003cbr\u003e6.16 Polytetrafluorethylene\u003cbr\u003e6.17 Polyurethane\u003cbr\u003e6.18 Polyvinylchloride\u003cbr\u003e6.19 Poly(vinylidene chloride)\u003cbr\u003e6.20 Rubber\u003cbr\u003e7 General testing requirements\u003cbr\u003e7.1 What to test\u003cbr\u003e7.2 Methods of study of deterioration rate\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eGeorge Wypych has PhD Eng. The professional expertise includes university teaching (full professor) and research \u0026amp; development (university and corporate). He has published 48 books (PVC Plastisols, Wroclaw University Press; Polyvinylchloride Degradation, Elsevier; Polyvinylchloride Stabilization, Elsevier; Polymer Modified Textile Materials, Wiley \u0026amp; Sons; Handbook of Material Weathering, 1st, 2nd, 3rd, 4th, 5th, 6th Edition, ChemTec Publishing; Handbook of Fillers, 1st, 2nd, 3rd, 4th, and 5th Edition, ChemTec Publishing; Recycling of PVC, ChemTec Publishing; Weathering of Plastics. Testing to Mirror Real Life Performance, Plastics Design Library, Handbook of Solvents, Vol. 1. Properties 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Solvents, Vol. 2. Health \u0026amp; Environment 1st, 2nd, and 3rd Edition, ChemTec Publishing, Handbook of Plasticizers, 1st, 2nd, 3rd, 4th Edition, ChemTec Publishing, Handbook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Databook of Antistatics, 1st and 2nd Edition, ChemTec Publishing, Handbook of Antiblocking, Release and Slip Additives, 1st , 2nd and 3rd Edition, ChemTec Publishing, Industrial Solvents in Kirk-Othmer Encyclopedia of Chemical Technology (two editions), John Wiley \u0026amp; Sons, PVC Degradation \u0026amp; Stabilization, 1st, 2nd, 3rd, and 4th Editions, ChemTec Publishing, The PVC Formulary, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Material Biodegradation, Biodeterioration, and Biostabilization, 1st and 2nd Editions, ChemTec Publishing, Handbook of UV Degradation and Stabilization, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Polymers, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Atlas of Material Damage, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Handbook of Odors in Plastic Materials, 1st, 2nd, and 3rd Editions, ChemTec Publishing, Databook of Solvents (two editions), ChemTec Publishing, Databook of Blowing and Auxiliary Agents, ChemTec Publishing, Handbook of Foaming and Blowing Agents (two editions), ChemTec Publishing, Databook of Green Solvents, ChemTec Publishing (two editions), Self-healing Products (two editions), ChemTec Publishing, Handbook of Adhesion Promoters (two editions), ChemTec Publishing, Databook of Surface Modification Additives (two editions), ChemTec Publishing, Handbook of Surface Improvement and Modification (two editions), ChemTec Publishing, Graphene – Important Results and Applications, ChemTec Publishing, Handbook of Curatives and Crosslinkers, ChemTec Publishing, Chain Mobility and Progress in Medicine, Pharmaceutical, Polymer Science and Technology, Impact of Award, ChemTec Publishing, Databook of Antioxidants, ChemTec Publishing, Handbook of Antioxidants, ChemTec Publishing, Databook of UV Stabilizers (two Editions), ChemTec Publishing, Databook of Flame Retardants, ChemTec Publishing, Databook of Nucleating Agents, ChemTec Publishing, Handbook of Flame Retardants, ChemTec Publishing, Handbook of Nucleating Agents, ChemTec Publishing, Handbook of Polymers in Electronics, ChemTec Publishing, Databook of Impact Modifiers, ChemTec Publishing, Databook of Rheological Additives, ChemTec Publishing, Handbook of Impact Modifiers, ChemTec Publishing, Handbook of Rheological Additives, ChemTec Publishing, Databook of Polymer Processing Additives, ChemTec Publishing, Handbook of Polymer Processing Additives, ChemTec Publishing, Functional Fillers (two editions), 2 databases (Solvents Database, 1st, 2nd, 3rd Edition and Database of Antistatics 1st and 2nd Edition, both by ChemTec Publishing), and 42 scientific papers and obtained 16 patents. He specializes in PVC, polymer additives, material durability, and the development of sealants and coatings. He was included in the Dictionary of International Biography, Who's Who in Plastics and Polymers, and Who's Who in Engineering, and was selected International Man of the Year 1996-1997 in recognition of services to education.\u003c\/p\u003e"}
Encyclopedic Dictionar...
$199.00
{"id":11242252868,"title":"Encyclopedic Dictionary of Commercial Polymer Blends","handle":"1-895198-07-0","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: L. A. Utracki \u003cbr\u003e10-ISBN 1-895198-07-0\u003c\/p\u003e\n\u003cp\u003e13-ISBN 978-1-895198-07-2\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003einformation on 176 blends and 1009 grades. 654 pages (8.5x11 '), 62 figures and photographs, 563 tables, 514 references,\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPolymer blending is nearly as old as the polymers themselves. However, the literature dedicated to this technology is relatively recent, and primarily focused on the academic aspects of polymer blends. It seems that there is a dichotomy of efforts. On one hand, annually the industry generates about 30 million tons of blends, and on the other, academia produces over 10,000 publications dedicated mainly to studies of model systems. The only place where these two streams meet is a laboratory of industrial researcher. The Encyclopedic Dictionary discusses blends available in the world market. The information comes directly from manufacturers. To create this Baedeker of commercial polymer blends, the manufacturers were asked to prepare authorized texts containing non-confidential technical data in a standardized form or to provide literature containing required information according to the following outline:\u003cbr\u003eBlend Trade Name; Author's Name(s) and Company\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eIntroduction. Chemical composition, type of the resin, morphology, history of discovery and commercialization, general characteristics.\u003c\/li\u003e\n\u003cli\u003eBlending. Properties of neat ingredients, blending, compatibilization, and manufacturing methods, desired blend morphology, statistical quality control, available grades, forms, etc.\u003c\/li\u003e\n\u003cli\u003eBlend properties. Mechanical, thermal, optical, chemical, electrical, environmental, heat and flammability resistance, shrinkage, and others provided in a form of standard table(s). Advantages and disadvantages of the blend.\u003c\/li\u003e\n\u003cli\u003eProcessing. General processing difficulties and requirements, stressing the processing-sensitive aspects of the blend. The recommended conditions for blend processing such as extrusion, molding, thermoforming, etc. Discussion of the material preparation procedures, processability window, as well as the post-processing aspects (recyclability, annealing, machining, finishing, printing, etc.). Information on the standard design criteria.\u003c\/li\u003e\n\u003cli\u003eEconomic aspects. Discussion of the historical consumption and prices. List of the competitive materials, viz., metals, homopolymers, other blends, etc., given in the form of standard table. List of similar blends with their trade and manufacturer names, given in the form of standard table. Quality control specifications and standards, health and safety factors, and forecast of the blend evolution.\u003c\/li\u003e\n\u003cli\u003eUses and performance. Discussion of the principal blend applications, performance of the finished product (specific advantage of the blend), stressing the critical factors affecting blends' performance, weathering, and long-term performance.\u003c\/li\u003e\n\u003cli\u003eAdditional information.\u003c\/li\u003e\n\u003cli\u003eBibliography. List of pertinent patents, scientific references, trade brochures and articles, and recommended reading.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003eThe received responses varied from one manufacturer to the next. The texts were edited to preserve a consistent structure of the information and supplemented with data from other sources. In other cases, information from literature provided by manufacturer was processed according to the outline format (and frequently corrected by manufacturer). The blends described in the EDCPB provide a cross-section of commercial alloys available in Asia, Europe, and North America. Information included in the description of individual blends is analyzed and summarized in the Introductory Chapter contributed by the Editor, providing excellent overview of current state of the market, technology, future needs, and opportunities.\u003cbr\u003eThe book is the most comprehensive source on commercial polymer blends ever published. The other factor of importance is that the content is based on the current, updated information therefore products discussed in the book are currently available and used by industry. Until now, this type of information was provided, at very high cost, by specialized consulting companies. The limited edition volumes were available at fees ranging in thousands of dollars. By contrast, the Encyclopaedic Dictionary of Commercial Polymer Blends is much more comprehensive in scope and detail, as well as very competitively priced. The book is unique, highly pertinent source of information for students and researchers in the field of polymer science and technology, for formulators, inventors, as well as for processing and design engineers. Furthermore, since today most polymers are blended (even if not identified as such), the information is pertinent to anyone working with polymers.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:15:23-04:00","created_at":"2017-06-22T21:15:23-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["1994","blends","book","dictionary","encyclopedia","extrusion","increased miscibility polymer blends","ingredient","molding","moulding","p-chemistry","performance","plastics","polymers","resins. morphology","thermoforming","weathering"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378482500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Encyclopedic Dictionary of Commercial Polymer Blends","public_title":null,"options":["Default Title"],"price":19900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"1-895198-07-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: L. A. Utracki \u003cbr\u003e10-ISBN 1-895198-07-0\u003c\/p\u003e\n\u003cp\u003e13-ISBN 978-1-895198-07-2\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003einformation on 176 blends and 1009 grades. 654 pages (8.5x11 '), 62 figures and photographs, 563 tables, 514 references,\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPolymer blending is nearly as old as the polymers themselves. However, the literature dedicated to this technology is relatively recent, and primarily focused on the academic aspects of polymer blends. It seems that there is a dichotomy of efforts. On one hand, annually the industry generates about 30 million tons of blends, and on the other, academia produces over 10,000 publications dedicated mainly to studies of model systems. The only place where these two streams meet is a laboratory of industrial researcher. The Encyclopedic Dictionary discusses blends available in the world market. The information comes directly from manufacturers. To create this Baedeker of commercial polymer blends, the manufacturers were asked to prepare authorized texts containing non-confidential technical data in a standardized form or to provide literature containing required information according to the following outline:\u003cbr\u003eBlend Trade Name; Author's Name(s) and Company\u003cbr\u003e\n\u003col\u003e\n\u003cli\u003eIntroduction. Chemical composition, type of the resin, morphology, history of discovery and commercialization, general characteristics.\u003c\/li\u003e\n\u003cli\u003eBlending. Properties of neat ingredients, blending, compatibilization, and manufacturing methods, desired blend morphology, statistical quality control, available grades, forms, etc.\u003c\/li\u003e\n\u003cli\u003eBlend properties. Mechanical, thermal, optical, chemical, electrical, environmental, heat and flammability resistance, shrinkage, and others provided in a form of standard table(s). Advantages and disadvantages of the blend.\u003c\/li\u003e\n\u003cli\u003eProcessing. General processing difficulties and requirements, stressing the processing-sensitive aspects of the blend. The recommended conditions for blend processing such as extrusion, molding, thermoforming, etc. Discussion of the material preparation procedures, processability window, as well as the post-processing aspects (recyclability, annealing, machining, finishing, printing, etc.). Information on the standard design criteria.\u003c\/li\u003e\n\u003cli\u003eEconomic aspects. Discussion of the historical consumption and prices. List of the competitive materials, viz., metals, homopolymers, other blends, etc., given in the form of standard table. List of similar blends with their trade and manufacturer names, given in the form of standard table. Quality control specifications and standards, health and safety factors, and forecast of the blend evolution.\u003c\/li\u003e\n\u003cli\u003eUses and performance. Discussion of the principal blend applications, performance of the finished product (specific advantage of the blend), stressing the critical factors affecting blends' performance, weathering, and long-term performance.\u003c\/li\u003e\n\u003cli\u003eAdditional information.\u003c\/li\u003e\n\u003cli\u003eBibliography. List of pertinent patents, scientific references, trade brochures and articles, and recommended reading.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cbr\u003eThe received responses varied from one manufacturer to the next. The texts were edited to preserve a consistent structure of the information and supplemented with data from other sources. In other cases, information from literature provided by manufacturer was processed according to the outline format (and frequently corrected by manufacturer). The blends described in the EDCPB provide a cross-section of commercial alloys available in Asia, Europe, and North America. Information included in the description of individual blends is analyzed and summarized in the Introductory Chapter contributed by the Editor, providing excellent overview of current state of the market, technology, future needs, and opportunities.\u003cbr\u003eThe book is the most comprehensive source on commercial polymer blends ever published. The other factor of importance is that the content is based on the current, updated information therefore products discussed in the book are currently available and used by industry. Until now, this type of information was provided, at very high cost, by specialized consulting companies. The limited edition volumes were available at fees ranging in thousands of dollars. By contrast, the Encyclopaedic Dictionary of Commercial Polymer Blends is much more comprehensive in scope and detail, as well as very competitively priced. The book is unique, highly pertinent source of information for students and researchers in the field of polymer science and technology, for formulators, inventors, as well as for processing and design engineers. Furthermore, since today most polymers are blended (even if not identified as such), the information is pertinent to anyone working with polymers.\u003cbr\u003e\u003cbr\u003e"}
Encyclopedic Dictionar...
$619.00
{"id":11242217284,"title":"Encyclopedic Dictionary of Polymers, 2nd Ed","handle":"978-1-4419-6246-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Gooch, Jan W. Editor \u003cbr\u003eISBN 978-1-4419-6246-1 \u003cbr\u003e\u003cbr\u003e2nd revised and updated edition, XXXII, 520 p. 390 illus.\n\u003ch5\u003eSummary\u003c\/h5\u003e\n- This 2nd edition expands on the first-ever book of polymer terminology published by introducing more than 450 new entries and more than 120 new illustrations\u003cbr\u003e-New interactive software provides easy access to innovative features, such as molecular imaging of chemical structures (2D\/3D-view), 1800 audio files for phonetic pronunciation\u003cbr\u003eIncludes polymer science equations\u003cbr\u003eFeatures a solubility parameter calculator\u003cbr\u003eAlso, contains an algebraic calculator\u003cbr\u003eInteractive periodic table and more\u003cbr\u003eThis reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDr. Jan W. Gooch earned a Bachelor of Science Degree at Arkansas Polytechnic College and a Doctorate Degree of Philosophy in Polymer Science at the University of Southern Mississippi. Dr. Gooch is currently an Adjunct Professor of Chemical and Biomolecular Engineering at the Georgia Institute of Technology and an international consultant in the field of coatings technology, polymer science and engineering with twenty-seven years of research experience. Dr. Gooch was a Senior Engineer with Bechtel Group, Inc. and a Senior Scientist with Cook Paint \u0026amp; Varnish Company prior to joining the research faculty at the Georgia Institute of Technology. Dr. Gooch added biomedical materials and applications to his experience by serving as a National Research Council Associate from 2001 to 2004 years at the United States Army Institute of Surgical Research. Dr. Gooch has published one hundred and thirty-three journal papers and conference presentations, ten books and chapters, has been awarded fourteen patents and is affiliated with major national and international professional organizations. Dr. Gooch has assembled a comprehensive digest of scientific and engineering terms from a lengthy and successful career in polymeric materials and processing.","published_at":"2017-06-22T21:13:32-04:00","created_at":"2017-06-22T21:13:32-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2011","analytical methods","biochemical terms","book","chemical structures","equations","general","interactive","polymer","polymer science equations","polymeric materials terms","polymers","solubility parameter calculator"],"price":61900,"price_min":61900,"price_max":61900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378360452,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Encyclopedic Dictionary of Polymers, 2nd Ed","public_title":null,"options":["Default Title"],"price":61900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-4419-6246-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-4419-6246-1.jpg?v=1499375214"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4419-6246-1.jpg?v=1499375214","options":["Title"],"media":[{"alt":null,"id":354794471517,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4419-6246-1.jpg?v=1499375214"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4419-6246-1.jpg?v=1499375214","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Gooch, Jan W. Editor \u003cbr\u003eISBN 978-1-4419-6246-1 \u003cbr\u003e\u003cbr\u003e2nd revised and updated edition, XXXII, 520 p. 390 illus.\n\u003ch5\u003eSummary\u003c\/h5\u003e\n- This 2nd edition expands on the first-ever book of polymer terminology published by introducing more than 450 new entries and more than 120 new illustrations\u003cbr\u003e-New interactive software provides easy access to innovative features, such as molecular imaging of chemical structures (2D\/3D-view), 1800 audio files for phonetic pronunciation\u003cbr\u003eIncludes polymer science equations\u003cbr\u003eFeatures a solubility parameter calculator\u003cbr\u003eAlso, contains an algebraic calculator\u003cbr\u003eInteractive periodic table and more\u003cbr\u003eThis reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDr. Jan W. Gooch earned a Bachelor of Science Degree at Arkansas Polytechnic College and a Doctorate Degree of Philosophy in Polymer Science at the University of Southern Mississippi. Dr. Gooch is currently an Adjunct Professor of Chemical and Biomolecular Engineering at the Georgia Institute of Technology and an international consultant in the field of coatings technology, polymer science and engineering with twenty-seven years of research experience. Dr. Gooch was a Senior Engineer with Bechtel Group, Inc. and a Senior Scientist with Cook Paint \u0026amp; Varnish Company prior to joining the research faculty at the Georgia Institute of Technology. Dr. Gooch added biomedical materials and applications to his experience by serving as a National Research Council Associate from 2001 to 2004 years at the United States Army Institute of Surgical Research. Dr. Gooch has published one hundred and thirty-three journal papers and conference presentations, ten books and chapters, has been awarded fourteen patents and is affiliated with major national and international professional organizations. Dr. Gooch has assembled a comprehensive digest of scientific and engineering terms from a lengthy and successful career in polymeric materials and processing."}
End-of-Life Tyres-Expl...
$450.00
{"id":11242225092,"title":"End-of-Life Tyres-Exploiting their Value","handle":"978-1-85957-241-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: P.W. Dufton \u003cbr\u003eISBN 978-1-85957-241-2 \u003cbr\u003e\u003cbr\u003ePages: 210, Figures: 7, Tables: 50\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nMuch has happened recently in the field of waste management and this has had a strong impact on the handling of used tires. This Rapra Industry Analysis Report provides up-to-date data and comment about the progress in the UK, Europe and North America in the handling of the problem of used tires once removed from vehicles. Legislation in Europe is concentrating the minds of authorities and operators alike, to provide sustainable solutions to the recovery and recycling of these tires and to maximize the benefit from such activity. \u003cbr\u003eThe report considers the various options for the recovery and recycling of used tires. A brief description of tire construction and design is accompanied by a discussion of trends in tire manufacturing and how these may affect subsequent recycling. After an analysis of the retread industry and its relevance to the recycling issues, the different routes that a non-retreadable tire may take are examined: rubber crumb production, pyrolysis, reclaim rubber and other chemical or thermal processes that yield a selection of end products. The processes involved and the applications of the resulting materials are discussed. Recovery of energy from used Tires by incineration and the techniques involved is also reviewed. \u003cbr\u003eThe regulatory initiatives and legislative pressures likely to affect the management of end-of-life tires are considered with discussion of the situation in Europe, North America and Japan. Estimates are provided\u003cbr\u003efor the quantities of tires involved. Analysis of these figures allows comparison between the various recycling activities and the emerging trends are discussed. \u003cbr\u003eThe report is of interest to a range of different sectors from those responsible for waste management, regulatory bodies and local authorities through retreaders and recyclers to those who make rubber-containing products or who plan to enhance value from the materials contained in end-of-life tires.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nPeter W. Dufton graduated from Cambridge University in materials Science before taking a research degree for work on mechanical properties of high strength aircraft materials. He joined Dunlop in 1970 to work on tire reinforcement materials before moving within the company to technical support and product development in the Overseas Division. This was followed by a period as Overseas Business Development Manager in Dunlop Adhesives. Since joining Rapra in 1987, as a consultant in the business analysis and publishing areas, he has undertaken multi-client work in the field of market research on a range of topics. These include tires, fire-related matters, wire and cable and various other end-use sectors for the polymers, individual polymer materials development and compounding additives. He is also the author of several reports in the Rapra Industry Analysis Series.","published_at":"2017-06-22T21:13:58-04:00","created_at":"2017-06-22T21:13:58-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2001","acrylate rubber","book","crumb","incineration","plastics","pyrolysis","r-properties","recovery","recycling","rubber","tires","waste"],"price":45000,"price_min":45000,"price_max":45000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378390404,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"End-of-Life Tyres-Exploiting their Value","public_title":null,"options":["Default Title"],"price":45000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-241-2","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-241-2.jpg?v=1499727385"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-241-2.jpg?v=1499727385","options":["Title"],"media":[{"alt":null,"id":354794504285,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-241-2.jpg?v=1499727385"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-241-2.jpg?v=1499727385","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: P.W. Dufton \u003cbr\u003eISBN 978-1-85957-241-2 \u003cbr\u003e\u003cbr\u003ePages: 210, Figures: 7, Tables: 50\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nMuch has happened recently in the field of waste management and this has had a strong impact on the handling of used tires. This Rapra Industry Analysis Report provides up-to-date data and comment about the progress in the UK, Europe and North America in the handling of the problem of used tires once removed from vehicles. Legislation in Europe is concentrating the minds of authorities and operators alike, to provide sustainable solutions to the recovery and recycling of these tires and to maximize the benefit from such activity. \u003cbr\u003eThe report considers the various options for the recovery and recycling of used tires. A brief description of tire construction and design is accompanied by a discussion of trends in tire manufacturing and how these may affect subsequent recycling. After an analysis of the retread industry and its relevance to the recycling issues, the different routes that a non-retreadable tire may take are examined: rubber crumb production, pyrolysis, reclaim rubber and other chemical or thermal processes that yield a selection of end products. The processes involved and the applications of the resulting materials are discussed. Recovery of energy from used Tires by incineration and the techniques involved is also reviewed. \u003cbr\u003eThe regulatory initiatives and legislative pressures likely to affect the management of end-of-life tires are considered with discussion of the situation in Europe, North America and Japan. Estimates are provided\u003cbr\u003efor the quantities of tires involved. Analysis of these figures allows comparison between the various recycling activities and the emerging trends are discussed. \u003cbr\u003eThe report is of interest to a range of different sectors from those responsible for waste management, regulatory bodies and local authorities through retreaders and recyclers to those who make rubber-containing products or who plan to enhance value from the materials contained in end-of-life tires.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nPeter W. Dufton graduated from Cambridge University in materials Science before taking a research degree for work on mechanical properties of high strength aircraft materials. He joined Dunlop in 1970 to work on tire reinforcement materials before moving within the company to technical support and product development in the Overseas Division. This was followed by a period as Overseas Business Development Manager in Dunlop Adhesives. Since joining Rapra in 1987, as a consultant in the business analysis and publishing areas, he has undertaken multi-client work in the field of market research on a range of topics. These include tires, fire-related matters, wire and cable and various other end-use sectors for the polymers, individual polymer materials development and compounding additives. He is also the author of several reports in the Rapra Industry Analysis Series."}
Energy Management in P...
$150.00
{"id":11242248772,"title":"Energy Management in Plastics Processing: Strategies, Targets, Techniques and Tools","handle":"978-1-906479-03-9","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Kent \u003cbr\u003eISBN 978-1-906479-03-9 \u003cbr\u003e\u003cbr\u003eNumber of pages: 271 \u003cbr\u003eCover: Softback\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis unique book provides a structured approach to the techniques of energy management and covers the main topics of relevance to plastics processors. It is designed as a workbook for practical use, and it contains advice which can be applied within companies involved in all types of plastics processing, in order to reduce their energy usage and costs.\u003cbr\u003e\u003cbr\u003eThe main principle applied throughout the book is the reduction of the amount of energy used to process each kilogram of material, resulting in lasting savings. Benchmarking data is provided to enable companies to compare their performance with their competitors, and ‘Where are you now?’ charts indicate the best opportunities for improvements. Practical solutions are provided to manage and reduce energy usage across the entire manufacturing site, including general buildings and offices, as well as processing equipment, factory services, and related operations.\u003cbr\u003e\u003cbr\u003eThe author is a renowned expert in this field, and has extensive experience in carrying out energy surveys and designing energy management systems in plastics factories. This is a companion volume to his successful guide to Cost Management in Plastics Processing, second edition, which was published in 2007.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface \u003cbr\u003eIntroduction to energy management \u003cbr\u003eEnergy benchmarking \u003cbr\u003eTargeting and controlling energy costs \u003cbr\u003eServices \u003cbr\u003eProcessing \u003cbr\u003eOperations \u003cbr\u003eBuildings and offices \u003cbr\u003eSite surveys \u003cbr\u003eAppendices \u003cbr\u003ePostscript \u003cbr\u003eAbbreviations and acronyms\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:15:11-04:00","created_at":"2017-06-22T21:15:11-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2008","book","energy costs","energy management","general","Plastics Information Direct","plastics processors","reduce energy usage reduce energy costs"],"price":15000,"price_min":15000,"price_max":15000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378467844,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Energy Management in Plastics Processing: Strategies, Targets, Techniques and Tools","public_title":null,"options":["Default Title"],"price":15000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-906479-03-9","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-03-9.jpg?v=1499375335"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-03-9.jpg?v=1499375335","options":["Title"],"media":[{"alt":null,"id":354794569821,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-03-9.jpg?v=1499375335"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-03-9.jpg?v=1499375335","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Kent \u003cbr\u003eISBN 978-1-906479-03-9 \u003cbr\u003e\u003cbr\u003eNumber of pages: 271 \u003cbr\u003eCover: Softback\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis unique book provides a structured approach to the techniques of energy management and covers the main topics of relevance to plastics processors. It is designed as a workbook for practical use, and it contains advice which can be applied within companies involved in all types of plastics processing, in order to reduce their energy usage and costs.\u003cbr\u003e\u003cbr\u003eThe main principle applied throughout the book is the reduction of the amount of energy used to process each kilogram of material, resulting in lasting savings. Benchmarking data is provided to enable companies to compare their performance with their competitors, and ‘Where are you now?’ charts indicate the best opportunities for improvements. Practical solutions are provided to manage and reduce energy usage across the entire manufacturing site, including general buildings and offices, as well as processing equipment, factory services, and related operations.\u003cbr\u003e\u003cbr\u003eThe author is a renowned expert in this field, and has extensive experience in carrying out energy surveys and designing energy management systems in plastics factories. This is a companion volume to his successful guide to Cost Management in Plastics Processing, second edition, which was published in 2007.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface \u003cbr\u003eIntroduction to energy management \u003cbr\u003eEnergy benchmarking \u003cbr\u003eTargeting and controlling energy costs \u003cbr\u003eServices \u003cbr\u003eProcessing \u003cbr\u003eOperations \u003cbr\u003eBuildings and offices \u003cbr\u003eSite surveys \u003cbr\u003eAppendices \u003cbr\u003ePostscript \u003cbr\u003eAbbreviations and acronyms\u003cbr\u003e\u003cbr\u003e"}
Energy Management in P...
$175.00
{"id":11242204036,"title":"Energy Management in Plastics Processing: Strategies, Targets, Techniques and Tools, 2nd Edition","handle":"978-1906479107","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Robin Kent \u003cbr\u003eISBN 978-1906479107 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003epages 355\u003c\/p\u003e\n\u003cp\u003ePaperback \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe second edition of a Plastics Information Direct best-seller.\u003cbr\u003e\u003cbr\u003eSince the first edition of this handbook, the issues of energy management and energy efficiency have moved considerably higher up the management agenda for most plastics processing companies. Many processors have started the journey towards energy management and those that have made the effort have been well rewarded by decreased energy use and, more importantly, by decreased energy costs.\u003cbr\u003e\u003cbr\u003eMachinery manufacturers have also recognized the importance of energy costs and most have improved machines and technologies to reduce energy use.\u003cbr\u003e\u003cbr\u003eThis practical workbook shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming) as well as elsewhere in the plant (e.g. in factory services and non-manufacturing areas). It also addresses essential issues such as energy benchmarking and site surveys, understanding energy supplies and bills, measuring and managing energy usage and carbon footprinting.\u003cbr\u003e\u003cbr\u003eThe principle adopted throughout the book is to reduce the amount of energy used to process each kg of plastic, resulting in a permanent saving. Each topic is addressed in a simple two-page spread, providing a clear and well-structured route-map broken down into simple tasks and achievable goals.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003eRobin Kent is widely known across the plastics processing industry for his expertise in energy and manufacturing efficiency which he communicates through his books, presentations, training, and consultancy. He was awarded a Personal Contribution award at the 2010 Plastics Industry Awards in the UK for his work as a champion of energy efficiency.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has been involved with plastics processing in a variety of sectors including extrusion and injection moulding for 40 years. He has been technical director of several major European plastics processing companies but also understands the pressures on smaller businesses, having run his own plastics engineering consultancy since 1996.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has published over 400 papers and articles and also written a companion volume: Cost Management in Plastics Processing: Strategies, targets, techniques and tools, the third edition of which was published in 2012 by Plastics Information Direct. \u003c\/div\u003e","published_at":"2017-06-22T21:12:50-04:00","created_at":"2017-06-22T21:12:50-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2013","book","energy consumption","energy cost","energy management","general","plastics"],"price":17500,"price_min":17500,"price_max":17500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378317188,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Energy Management in Plastics Processing: Strategies, Targets, Techniques and Tools, 2nd Edition","public_title":null,"options":["Default Title"],"price":17500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1906479107","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1906479107.jpg?v=1499988050"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1906479107.jpg?v=1499988050","options":["Title"],"media":[{"alt":null,"id":354794602589,"position":1,"preview_image":{"aspect_ratio":0.713,"height":450,"width":321,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1906479107.jpg?v=1499988050"},"aspect_ratio":0.713,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1906479107.jpg?v=1499988050","width":321}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Robin Kent \u003cbr\u003eISBN 978-1906479107 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003epages 355\u003c\/p\u003e\n\u003cp\u003ePaperback \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe second edition of a Plastics Information Direct best-seller.\u003cbr\u003e\u003cbr\u003eSince the first edition of this handbook, the issues of energy management and energy efficiency have moved considerably higher up the management agenda for most plastics processing companies. Many processors have started the journey towards energy management and those that have made the effort have been well rewarded by decreased energy use and, more importantly, by decreased energy costs.\u003cbr\u003e\u003cbr\u003eMachinery manufacturers have also recognized the importance of energy costs and most have improved machines and technologies to reduce energy use.\u003cbr\u003e\u003cbr\u003eThis practical workbook shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming) as well as elsewhere in the plant (e.g. in factory services and non-manufacturing areas). It also addresses essential issues such as energy benchmarking and site surveys, understanding energy supplies and bills, measuring and managing energy usage and carbon footprinting.\u003cbr\u003e\u003cbr\u003eThe principle adopted throughout the book is to reduce the amount of energy used to process each kg of plastic, resulting in a permanent saving. Each topic is addressed in a simple two-page spread, providing a clear and well-structured route-map broken down into simple tasks and achievable goals.\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003eRobin Kent is widely known across the plastics processing industry for his expertise in energy and manufacturing efficiency which he communicates through his books, presentations, training, and consultancy. He was awarded a Personal Contribution award at the 2010 Plastics Industry Awards in the UK for his work as a champion of energy efficiency.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has been involved with plastics processing in a variety of sectors including extrusion and injection moulding for 40 years. He has been technical director of several major European plastics processing companies but also understands the pressures on smaller businesses, having run his own plastics engineering consultancy since 1996.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has published over 400 papers and articles and also written a companion volume: Cost Management in Plastics Processing: Strategies, targets, techniques and tools, the third edition of which was published in 2012 by Plastics Information Direct. \u003c\/div\u003e"}
Engineering and High P...
$500.00
{"id":11242213700,"title":"Engineering and High Performance Plastics","handle":"978-1-85957-380-8","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: D.K. Platt \u003cbr\u003eISBN 978-1-85957-380-8 \u003cbr\u003e\u003cbr\u003epages 188\n\u003ch5\u003eSummary\u003c\/h5\u003e\nEngineering and high performance polymers cover a wide spectrum of materials from well-established plastics such as nylon and ABS to developing polymers such as LCP and PEEK. They are valued, amongst other things, for their temperature resistance, strength, dimensional stability and chemical resistance in many demanding applications. Engineering and high performance polymers experienced high growth during the second half of the 1990s because of high demand for IT\/telecom products and automotive components. Product and applications development and substitution of traditional materials were also key drivers of growth. However, during the last two years consumption fell dramatically due to the downturn in key end user markets and lower world economic activity. \u003cbr\u003e\u003cbr\u003eThis report discusses the different types of engineering and high performance polymers, their key performance properties, applications and the trends in material developments. The principal polymer types covered are: polyamide, polybutylene terephthalate, polycarbonate, polymethyl methacrylate, acrylonitrile-butadiene-styrene terpolymer, polyetheretherketone, polyoxymethylene, polyphenylene sulfide, polyetherimide, polyphenylene oxide, polysulfone and liquid crystal polymer. \u003cbr\u003e\u003cbr\u003eFive end-use markets are analyzed: automotive, electrical \u0026amp; electronics, industrial, consumer and ‘other markets’, including medical. Each end-use section includes a detailed examination of consumption trends by polymer type for major world regions, current applications, plus market and technology developments. \u003cbr\u003e\u003cbr\u003eThe major world suppliers of engineering and high performance polymers, production capacities, geographic scope and corporate developments, are also examined in detail.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 Introduction\u003cbr\u003e1.1 Background\u003cbr\u003e1.2 The Report\u003cbr\u003e1.3 Methodology\u003cbr\u003e1.4 About the Author \u003cbr\u003e\u003cbr\u003e2 Executive Summary\u003cbr\u003e2.1 Global Market Forecasts\u003cbr\u003e2.2 Material Trends\u003cbr\u003e2.3 Regional Trends\u003cbr\u003e2.4 Technology Tends\u003cbr\u003e2.5 Market Trends\u003cbr\u003e2.6 Competitive Tends \u003cbr\u003e\u003cbr\u003e3 Overview of Engineering and High Performance Plastics\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Polyamide (PA)\u003cbr\u003e3.2.1 Properties\u003cbr\u003e3.2.2 Applications\u003cbr\u003e3.2.3 Processing\u003cbr\u003e3.2.4 Pricing Trends\u003cbr\u003e3.3 Polybutylene Terephthalate (PBT)\u003cbr\u003e3.3.1 Properties\u003cbr\u003e3.3.2 Applications\u003cbr\u003e3.3.3 Pricing Trends\u003cbr\u003e3.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e3.4.1 Properties\u003cbr\u003e3.4.2 Applications\u003cbr\u003e3.4.3 Pricing Trends\u003cbr\u003e3.5 Polycarbonate (PC)\u003cbr\u003e3.5.1 Properties\u003cbr\u003e3.5.2 Applications\u003cbr\u003e3.5.3 Pricing Trends\u003cbr\u003e3.6 Polyoxymethylene (POM)\u003cbr\u003e3.6.1 Properties\u003cbr\u003e3.6.2 Applications\u003cbr\u003e3.6.3 Pricing Trends\u003cbr\u003e3.7 Polymethylmethacrylate (PMMA)\u003cbr\u003e3.7.1 Properties\u003cbr\u003e3.7.2 Applications\u003cbr\u003e3.7.3 Pricing Trends\u003cbr\u003e3.8 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e3.8.1 Properties\u003cbr\u003e3.8.2 Applications\u003cbr\u003e3.8.3 Pricing Trends\u003cbr\u003e3.9 Polyphenylene Sulfide (PPS)\u003cbr\u003e3.9.1 Properties\u003cbr\u003e3.9.2 Applications\u003cbr\u003e3.9.3 Pricing Trends\u003cbr\u003e3.10 Polyetherimide (PEI)\u003cbr\u003e3.10.1 Properties\u003cbr\u003e3.10.2 Applications\u003cbr\u003e3.10.3 Pricing Trends\u003cbr\u003e3.11 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e3.11.1 Properties\u003cbr\u003e3.11.2 Applications\u003cbr\u003e3.11.3 Pricing Trends\u003cbr\u003e3.12 Polyphenylene Sulfone (PPSU)\u003cbr\u003e3.12.1 Properties\u003cbr\u003e3.12.2 Applications\u003cbr\u003e3.13 Liquid Crystal Polymers (LCP)\u003cbr\u003e3.13.1 Properties\u003cbr\u003e3.13.2 Applications\u003cbr\u003e3.13.3 Pricing Trends\u003cbr\u003e3.14 Polyetheretherketone (PEEK)\u003cbr\u003e3.14.1 Properties\u003cbr\u003e3.14.2 Applications\u003cbr\u003e3.14.3 Pricing Trends\u003cbr\u003e3.15 Polyphthalamide (PPA)\u003cbr\u003e3.15.1 Properties\u003cbr\u003e3.15.2 Applications\u003cbr\u003e3.16 Polyarylamide\u003cbr\u003e3.16.1 Properties\u003cbr\u003e3.16.2 Applications\u003cbr\u003e3.17 Polyamide-imide (PAI)\u003cbr\u003e3.17.1 Properties\u003cbr\u003e3.17.2 Applications\u003cbr\u003e3.18 Developing Materials\u003cbr\u003e3.18.1 Cyclic Olefin Copolymers\u003cbr\u003e3.18.2 Syndiotactic Polystyrene\u003cbr\u003e3.18.3 Cyclic Butylene Terephthalate (CBT)\u003cbr\u003e3.18.4 Copolycarbonate \u003cbr\u003e\u003cbr\u003e4 Global Demand for Engineering and High Performance Plastics\u003cbr\u003e4.1 Total World Demand\u003cbr\u003e4.1.1 Economic Background\u003cbr\u003e4.1.2 The Total World Market\u003cbr\u003e4.2 Demand Trends by Polymer Type, 1999-2002\u003cbr\u003e4.2.1 Polyamide (PA)\u003cbr\u003e4.2.2 Polybutylene Terephthalate (PBT)\u003cbr\u003e4.2.3 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e4.2.4 Polycarbonate (PC)\u003cbr\u003e4.2.5 Polyoxymethylene (POM)\u003cbr\u003e4.2.6 Polymethyl Methacrylate (PMMA)\u003cbr\u003e4.2.7 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e4.2.8 Polyphenylene Sulfide (PPS)\u003cbr\u003e4.2.9 Polyetherimide (PEI)\u003cbr\u003e4.2.10 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e4.2.11 Liquid Crystal Polymer (LCP)\u003cbr\u003e4.2.12 Polyetheretherketone (PEEK) \u003cbr\u003e\u003cbr\u003e5 Automotive Applications for Engineering and High Performance Plastics\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Future Prospects for the World Automotive Industry\u003cbr\u003e5.3 Future Trends for Engineering Polymers in Automotive Markets\u003cbr\u003e5.3.1 Recycling of End-of-Life-Vehicles EU Directive\u003cbr\u003e5.3.2 Proposed EU Legislation to Reduce Fuel Emissions\u003cbr\u003e5.3.3 Development of 'Mono-Material Systems'\u003cbr\u003e5.4 Polyamide\u003cbr\u003e5.4.1 Consumption Trends\u003cbr\u003e5.4.2 Current Applications\u003cbr\u003e5.4.3 Market Trends\u003cbr\u003e5.4.3.1 Inter-Polymer Substitution\u003cbr\u003e5.4.3.2 Competition from Metal\u003cbr\u003e5.4.3.3 Developments in Processing Technology\u003cbr\u003e5.4.3.4 Development of Hybrid Technology\u003cbr\u003e5.4.3.5 Development of In-Mould Painting Systems\u003cbr\u003e5.4.3.6 Development of the 42-Volt Electrical System\u003cbr\u003e5.4.3.7 New Applications Development\u003cbr\u003e5.5 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e5.5.1 Consumption Trends\u003cbr\u003e5.5.2 Current Applications\u003cbr\u003e5.5.3 Market Trends\u003cbr\u003e5.5.3.1 Replacement of Traditional Materials\u003cbr\u003e5.5.3.2 Inter-Polymer Substitution\u003cbr\u003e5.6 Polybutylene Terephthalate (PBT)\u003cbr\u003e5.6.1 Consumption Trends\u003cbr\u003e5.6.2 Current Applications\u003cbr\u003e5.6.3 Market Trends\u003cbr\u003e5.6.3.1 Growth in Electrical Applications\u003cbr\u003e5.6.3.2 Replacement of Metal Parts\u003cbr\u003e5.6.3.3 Inter-Polymer Substitution\u003cbr\u003e5.6.3.4 New Product Development\u003cbr\u003e5.7 Polycarbonate (PC)\u003cbr\u003e5.7.1 Consumption Trends\u003cbr\u003e5.7.2 Current Applications\u003cbr\u003e5.7.3 Market Trends\u003cbr\u003e5.7.3.1 Development of Automotive Glazing\u003cbr\u003e5.7.3.2 Replacement of Glass Lenses\u003cbr\u003e5.7.3.3 Inter-Polymer Substitution\u003cbr\u003e5.8 Polyoxymethylene (POM)\u003cbr\u003e5.8.1 Consumption Trends\u003cbr\u003e5.8.2 Current Applications\u003cbr\u003e5.8.3 Market Trends\u003cbr\u003e5.8.3.1 Inter-Polymer Substitution\u003cbr\u003e5.8.3.2 Product Developments\u003cbr\u003e5.8.3.3 Technology Development\u003cbr\u003e5.8.3.4 Growth in Electrical Systems\u003cbr\u003e5.8.3.5 Replacement of Metal\u003cbr\u003e5.9 Polymethyl Methacrylate (PMMA)\u003cbr\u003e5.9.1 Consumption Trends\u003cbr\u003e5.9.2 Current Applications\u003cbr\u003e5.9.3 Market Trends\u003cbr\u003e5.9.3.1 Replacement of Glass Car Headlamp Lenses\u003cbr\u003e5.9.3.2 New Applications Development\u003cbr\u003e5.9.3.3 Inter-Polymer Substitution\u003cbr\u003e5.10 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e5.10.1 Consumption Trends\u003cbr\u003e5.10.2 Current Applications\u003cbr\u003e5.10.3 Market Trends\u003cbr\u003e5.10.3.1 Inter-Polymer Substitution\u003cbr\u003e5.10.3.2 Development of New Applications\u003cbr\u003e5.10.3.3 New Product Development\u003cbr\u003e5.11 Polyphenylene Sulfide (PPS)\u003cbr\u003e5.11.1 Consumption Trends\u003cbr\u003e5.11.2 Current Applications\u003cbr\u003e5.11.3 Market Trends\u003cbr\u003e5.11.3.1 Replacement of Traditional Materials\u003cbr\u003e5.11.3.2 Inter-Polymer Substitution\u003cbr\u003e5.11.3.3 New Applications Development\u003cbr\u003e5.11.3.4 New Product Developments\u003cbr\u003e5.12 Polyetherimide (PEI)\u003cbr\u003e5.12.1 Consumption Trends\u003cbr\u003e5.12.2 Current Applications\u003cbr\u003e5.12.3 Market Trends\u003cbr\u003e5.12.3.1 Replacement of Traditional Materials\u003cbr\u003e5.12.3.2 Growth in Electrical Systems\u003cbr\u003e5.12.3.3 Inter-Polymer Substitution\u003cbr\u003e5.12.3.4 Product Development\u003cbr\u003e5.13 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e5.13.1 Consumption Trends\u003cbr\u003e5.13.2 Current Applications\u003cbr\u003e5.13.3 Market Trends\u003cbr\u003e5.13.3.1 Replacement of Thermosets\u003cbr\u003e5.14 Liquid Crystal Polymers (LCP)\u003cbr\u003e5.14.1 Consumption Trends\u003cbr\u003e5.14.2 Current Applications\u003cbr\u003e5.14.3 Market Trends\u003cbr\u003e5.14.3.1 Lead-Free Soldering Methods\u003cbr\u003e5.14.3.2 Material Replacement\u003cbr\u003e5.15 Polyetheretherketone (PEEK)\u003cbr\u003e5.15.1 Consumption Trends\u003cbr\u003e5.15.2 Current Applications\u003cbr\u003e5.15.3 Market Trends\u003cbr\u003e5.15.3.1 New Applications\u003cbr\u003e5.16 Polyphthalamide (PPA)\u003cbr\u003e5.16.1 Consumption Trends\u003cbr\u003e5.16.2 Current Applications\u003cbr\u003e5.16.3 Market Trends\u003cbr\u003e5.16.3.1 New Applications \u003cbr\u003e\u003cbr\u003e6 Electrical and Electronics Applications for Engineering and High Performance Plastics\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Trends and Market Drivers\u003cbr\u003e6.3 Future Prospects for the World E\u0026amp;E Industry\u003cbr\u003e6.4 Developments in Industry Regulations and Standards\u003cbr\u003e6.4.1 The EU Directive on Electrical \u0026amp; Electronics Waste\u003cbr\u003e6.4.2 EU Directive (IEC-60335-1) on Unattended Domestic Appliances\u003cbr\u003e6.5 Polyamide\u003cbr\u003e6.5.1 Consumption Trends\u003cbr\u003e6.5.2 Current Applications\u003cbr\u003e6.5.3 Market Trends\u003cbr\u003e6.5.3.1 Product Developments\u003cbr\u003e6.5.3.2 Inter-Polymer Substitution\u003cbr\u003e6.6 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e6.6.1 Consumption Trends\u003cbr\u003e6.6.2 Current Applications\u003cbr\u003e6.6.3 Market Trends\u003cbr\u003e6.7 Polybutylene Terephthalate (PBT)\u003cbr\u003e6.7.1 Consumption Trends\u003cbr\u003e6.7.2 Current Applications\u003cbr\u003e6.7.3 Market Trends\u003cbr\u003e6.7.3.1 New Products\u003cbr\u003e6.7.3.2 Development of PBT Polymer Blends\u003cbr\u003e6.7.3.3 Lead-Free Soldering Methods\u003cbr\u003e6.8 Polycarbonate (PC)\u003cbr\u003e6.8.1 Consumption Trends\u003cbr\u003e6.8.2 Current Applications\u003cbr\u003e6.8.3 Market Trends\u003cbr\u003e6.9 Polyoxymethylene (POM)\u003cbr\u003e6.9.1 Consumption Trends\u003cbr\u003e6.9.2 Current Applications\u003cbr\u003e6.9.3 Market Trends\u003cbr\u003e6.10 Polymethyl Methacrylate (PMMA)\u003cbr\u003e6.10.1 Consumption Trends\u003cbr\u003e6.10.2 Current Applications\u003cbr\u003e6.10.3 Market Trends\u003cbr\u003e6.11 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e6.11.1 Consumption Trends\u003cbr\u003e6.11.2 Current Applications\u003cbr\u003e6.11.3 Market Trends\u003cbr\u003e6.12 Polyphenylene Sulfide (PPS)\u003cbr\u003e6.12.1 Consumption Trends\u003cbr\u003e6.12.2 Current Applications\u003cbr\u003e6.12.3 Market Trends\u003cbr\u003e6.13 Polyetherimide (PEI)\u003cbr\u003e6.13.1 Consumption Trends\u003cbr\u003e6.13.2 Current Applications\u003cbr\u003e6.13.3 Market Trends\u003cbr\u003e6.14 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e6.14.1 Consumption Trends\u003cbr\u003e6.14.2 Current Applications\u003cbr\u003e6.14.3 Market Trends\u003cbr\u003e6.14.3.1 Inter-Polymer Substitution\u003cbr\u003e6.14.3.2 New Applications\u003cbr\u003e6.15 Liquid Crystal Polymers (LCP)\u003cbr\u003e6.15.1 Consumption Trends\u003cbr\u003e6.15.2 Current Applications\u003cbr\u003e6.15.3 Market Trends\u003cbr\u003e6.15.3.1 Inter-Polymer Substitution\u003cbr\u003e6.15.3.2 New Applications\u003cbr\u003e6.15.3.3 Lead-Free Soldering Methods\u003cbr\u003e6.16 Polyetheretherketone (PEEK)\u003cbr\u003e6.16.1 Consumption Trends\u003cbr\u003e6.16.2 Current Applications\u003cbr\u003e6.16.3 Market Trends\u003cbr\u003e6.17 Polyphthalamide (PPA)\u003cbr\u003e6.17.1 Current Applications\u003cbr\u003e6.17.2 Market Trends \u003cbr\u003e\u003cbr\u003e7 Industrial Applications for Engineering and High Performance Plastics\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Future Prospects for Industrial Markets\u003cbr\u003e7.3 Polyamide\u003cbr\u003e7.3.1 Consumption Trends\u003cbr\u003e7.3.2 Current Applications\u003cbr\u003e7.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e7.4.1 Consumption Trends\u003cbr\u003e7.4.2 Current Applications\u003cbr\u003e7.5 Polybutylene Terephthalate (PBT)\u003cbr\u003e7.5.1 Consumption Trends\u003cbr\u003e7.5.2 Current Applications\u003cbr\u003e7.6 Polyoxymethylene (POM)\u003cbr\u003e7.6.1 Consumption Trends\u003cbr\u003e7.6.2 Current Applications\u003cbr\u003e7.7 Polycarbonate (PC)\u003cbr\u003e7.7.1 Consumption Trends\u003cbr\u003e7.7.2 Current Applications\u003cbr\u003e7.8 Polymethyl methacrylate (PMMA)\u003cbr\u003e7.8.1 Consumption Trends\u003cbr\u003e7.8.2 Current Applications\u003cbr\u003e7.9 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e7.9.1 Consumption Trends\u003cbr\u003e7.9.2 Current Applications\u003cbr\u003e7.10 Polyphenylene Sulfide (PPS)\u003cbr\u003e7.10.1 Consumption Trends\u003cbr\u003e7.10.2 Current Applications\u003cbr\u003e7.11 Polyetherimide (PEI)\u003cbr\u003e7.11.1 Consumption Trends\u003cbr\u003e7.11.2 Current Applications\u003cbr\u003e7.12 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e7.12.1 Consumption Trends\u003cbr\u003e7.12.2 Current Applications\u003cbr\u003e7.13 Liquid Crystal Polymers (LCP)\u003cbr\u003e7.13.1 Consumption Trends\u003cbr\u003e7.13.2 Current Applications\u003cbr\u003e7.14 Polyetheretherketone (PEEK)\u003cbr\u003e7.14.1 Consumption Trends\u003cbr\u003e7.14.2 Current Applications \u003cbr\u003e\u003cbr\u003e8 Consumer Product Markets for Engineering and High Performance Plastics\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.1.1 Washing Machines\u003cbr\u003e8.1.2 Vacuum Cleaners\u003cbr\u003e8.1.3 Cookers\u003cbr\u003e8.1.4 Fridges\u003cbr\u003e8.1.5 Microwave Ovens\u003cbr\u003e8.1.6 Food Containers\u003cbr\u003e8.1.7 Lawnmowers\u003cbr\u003e8.1.8 Electric Irons\u003cbr\u003e8.1.9 Shavers\u003cbr\u003e8.1.10 Fryers\u003cbr\u003e8.1.11 Personal Hygiene\u003cbr\u003e8.1.12 Food Mixers\u003cbr\u003e8.2 Future Prospects for the Consumer Products Market\u003cbr\u003e8.3 Market Trends\u003cbr\u003e8.3.1 Growing Use of Special Effects Resins\u003cbr\u003e8.4 Polyamide\u003cbr\u003e8.4.1 Consumption Trends\u003cbr\u003e8.4.2 Current Applications\u003cbr\u003e8.5 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e8.5.1 Consumption Trends\u003cbr\u003e8.5.2 Current Applications\u003cbr\u003e8.6 Polybutylene Terephthalate (PBT)\u003cbr\u003e8.6.1 Consumption Trends\u003cbr\u003e8.6.2 Current Applications\u003cbr\u003e8.7 Polycarbonate (PC)\u003cbr\u003e8.7.1 Consumption Trends\u003cbr\u003e8.7.2 Current Applications\u003cbr\u003e8.8 Polyoxymethylene (POM)\u003cbr\u003e8.8.1 Consumption Trends\u003cbr\u003e8.8.2 Current Applications\u003cbr\u003e8.9 Polymethyl Methacrylate (PMMA)\u003cbr\u003e8.9.1 Consumption Trends\u003cbr\u003e8.9.2 Current Applications\u003cbr\u003e8.10 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e8.10.1 Consumption Trends\u003cbr\u003e8.10.2 Current Applications\u003cbr\u003e8.11 Polyphenylene Sulfide (PPS)\u003cbr\u003e8.11.1 Consumption Trends\u003cbr\u003e8.11.2 Current Applications\u003cbr\u003e8.12 Polyetherimide (PEI)\u003cbr\u003e8.12.1 Consumption Trends\u003cbr\u003e8.12.2 Current Applications\u003cbr\u003e8.13 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e8.13.1 Consumption Trends\u003cbr\u003e8.13.2 Current Applications\u003cbr\u003e8.14 Liquid Crystal Polymers (LCP)\u003cbr\u003e8.14.1 Consumption Trends\u003cbr\u003e8.14.2 Current Applications \u003cbr\u003e\u003cbr\u003e9 Other Markets for Engineering and High Performance Plastics\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Future Prospects for the Medical Devices Market\u003cbr\u003e9.3 Polyamide\u003cbr\u003e9.3.1 Consumption Trends\u003cbr\u003e9.3.2 Current Applications\u003cbr\u003e9.3.2.1 Film and Sheet\u003cbr\u003e9.3.2.2 Stock Shapes\u003cbr\u003e9.3.2.3 Other Markets\u003cbr\u003e9.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e9.4.1 Consumption Trends\u003cbr\u003e9.4.2 Current Applications\u003cbr\u003e9.5 Polybutylene Terephthalate (PBT)\u003cbr\u003e9.5.1 Consumption Trends\u003cbr\u003e9.5.2 Current Applications\u003cbr\u003e9.6 Polycarbonate (PC)\u003cbr\u003e9.6.1 Consumption Trends\u003cbr\u003e9.6.2 Current Applications\u003cbr\u003e9.7 Polyoxymethylene (POM)\u003cbr\u003e9.7.1 Consumption Trends\u003cbr\u003e9.7.2 Current Applications\u003cbr\u003e9.8 Polymethyl Methacrylate (PMMA)\u003cbr\u003e9.8.1 Consumption Trends\u003cbr\u003e9.8.2 Current Applications\u003cbr\u003e9.8.2.1 Optical Media\u003cbr\u003e9.8.2.2 Medical Devices\u003cbr\u003e9.8.2.3 Packaging\u003cbr\u003e9.9 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e9.9.1 Consumption Trends\u003cbr\u003e9.9.2 Current Applications\u003cbr\u003e9.10 Polyphenylene Sulfide (PPS)\u003cbr\u003e9.10.1 Consumption Trends\u003cbr\u003e9.10.2 Current Applications\u003cbr\u003e9.11 Polyetherimide (PEI)\u003cbr\u003e9.11.1 Consumption Trends\u003cbr\u003e9.11.2 Current Applications\u003cbr\u003e9.12 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e9.12.1 Consumption Trends\u003cbr\u003e9.12.2 Current Applications\u003cbr\u003e9.13 Liquid Crystal Polymers (LCP)\u003cbr\u003e9.13.1 Consumption Trends\u003cbr\u003e9.13.2 Current Applications\u003cbr\u003e9.14 Polyetheretherketone (PEEK)\u003cbr\u003e9.14.1 Consumption Trends\u003cbr\u003e9.14.2 Current Applications \u003cbr\u003e\u003cbr\u003e10 Leading World Suppliers of Engineering and High Performance Plastics\u003cbr\u003e10.1 Overview\u003cbr\u003e10.2 Polyamide (PA)\u003cbr\u003e10.2.1 Major Suppliers\u003cbr\u003e10.2.2 Products\u003cbr\u003e10.3 Polybutylene Terephthalate (PBT)\u003cbr\u003e10.3.1 Major Suppliers\u003cbr\u003e10.3.2 Products\u003cbr\u003e10.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e10.4.1 Major Suppliers\u003cbr\u003e10.4.2 Products\u003cbr\u003e10.5 Polycarbonate (PC)\u003cbr\u003e10.5.1 Major Suppliers\u003cbr\u003e10.5.2 Products\u003cbr\u003e10.6 Polyoxymethylene (POM)\u003cbr\u003e10.6.1 Major Suppliers\u003cbr\u003e10.6.2 Products\u003cbr\u003e10.7 Polymethyl Methacrylate (PMMA)\u003cbr\u003e10.7.1 Major Suppliers\u003cbr\u003e10.7.2 Products\u003cbr\u003e10.8 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e10.8.1 Major Suppliers\u003cbr\u003e10.8.2 Products\u003cbr\u003e10.9 Polyphenylene Sulfide (PPS)\u003cbr\u003e10.9.1 Major Suppliers\u003cbr\u003e10.9.2 Products\u003cbr\u003e10.10 Polyetherimide (PEI)\u003cbr\u003e10.10.1 Major Suppliers\u003cbr\u003e10.10.2 Products\u003cbr\u003e10.11 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e10.11.1 Major Suppliers\u003cbr\u003e10.11.2 Products\u003cbr\u003e10.12 Liquid Crystal Polymers (LCP)\u003cbr\u003e10.12.1 Major Suppliers\u003cbr\u003e10.12.2 Products\u003cbr\u003e10.13 Polyetheretherketone (PEEK)\u003cbr\u003e10.13.1 Major Suppliers\u003cbr\u003e10.13.2 Products\u003cbr\u003e10.14 Polyphthalamide (PPA)\u003cbr\u003e10.14.1 Major Suppliers\u003cbr\u003e10.14.2 Products\u003cbr\u003eDirectory of Major Suppliers\u003cbr\u003eAbbreviations and Acronyms\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDavid Platt graduated from the University of Nottingham with an Economics degree before completing an MBA at the University of Bradford. He joined a leading international market consultancy where he specialized in plastics sector research. He conducted a wide range of multi-client and single-client studies covering a wide range of materials, from standard thermoplastics, engineering and high performance polymers for conductive polymers and thermoplastic elastomers. He also completed market studies on plastics in automotive, packaging, wire \u0026amp; cable, pipe, and medical devices.","published_at":"2017-06-22T21:13:19-04:00","created_at":"2017-06-22T21:13:19-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2003","acrylonitrile-butadiene-styrene terpolymer","automotive market","book","electrical and electronics market","engineering","general","liquid crystal polymer","medical market","polyamide","polybutylene terephthalate","polycarbonate","polyetheretherketone","polyetherimide","polymethyl methacrylate","polyoxymethylene","polyphenylene oxide","polyphenylene sulfide","polysulfone"],"price":50000,"price_min":50000,"price_max":50000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378350788,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Engineering and High Performance Plastics","public_title":null,"options":["Default Title"],"price":50000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-380-8","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-380-8.jpg?v=1499375418"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-380-8.jpg?v=1499375418","options":["Title"],"media":[{"alt":null,"id":354794635357,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-380-8.jpg?v=1499375418"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-380-8.jpg?v=1499375418","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: D.K. Platt \u003cbr\u003eISBN 978-1-85957-380-8 \u003cbr\u003e\u003cbr\u003epages 188\n\u003ch5\u003eSummary\u003c\/h5\u003e\nEngineering and high performance polymers cover a wide spectrum of materials from well-established plastics such as nylon and ABS to developing polymers such as LCP and PEEK. They are valued, amongst other things, for their temperature resistance, strength, dimensional stability and chemical resistance in many demanding applications. Engineering and high performance polymers experienced high growth during the second half of the 1990s because of high demand for IT\/telecom products and automotive components. Product and applications development and substitution of traditional materials were also key drivers of growth. However, during the last two years consumption fell dramatically due to the downturn in key end user markets and lower world economic activity. \u003cbr\u003e\u003cbr\u003eThis report discusses the different types of engineering and high performance polymers, their key performance properties, applications and the trends in material developments. The principal polymer types covered are: polyamide, polybutylene terephthalate, polycarbonate, polymethyl methacrylate, acrylonitrile-butadiene-styrene terpolymer, polyetheretherketone, polyoxymethylene, polyphenylene sulfide, polyetherimide, polyphenylene oxide, polysulfone and liquid crystal polymer. \u003cbr\u003e\u003cbr\u003eFive end-use markets are analyzed: automotive, electrical \u0026amp; electronics, industrial, consumer and ‘other markets’, including medical. Each end-use section includes a detailed examination of consumption trends by polymer type for major world regions, current applications, plus market and technology developments. \u003cbr\u003e\u003cbr\u003eThe major world suppliers of engineering and high performance polymers, production capacities, geographic scope and corporate developments, are also examined in detail.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 Introduction\u003cbr\u003e1.1 Background\u003cbr\u003e1.2 The Report\u003cbr\u003e1.3 Methodology\u003cbr\u003e1.4 About the Author \u003cbr\u003e\u003cbr\u003e2 Executive Summary\u003cbr\u003e2.1 Global Market Forecasts\u003cbr\u003e2.2 Material Trends\u003cbr\u003e2.3 Regional Trends\u003cbr\u003e2.4 Technology Tends\u003cbr\u003e2.5 Market Trends\u003cbr\u003e2.6 Competitive Tends \u003cbr\u003e\u003cbr\u003e3 Overview of Engineering and High Performance Plastics\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Polyamide (PA)\u003cbr\u003e3.2.1 Properties\u003cbr\u003e3.2.2 Applications\u003cbr\u003e3.2.3 Processing\u003cbr\u003e3.2.4 Pricing Trends\u003cbr\u003e3.3 Polybutylene Terephthalate (PBT)\u003cbr\u003e3.3.1 Properties\u003cbr\u003e3.3.2 Applications\u003cbr\u003e3.3.3 Pricing Trends\u003cbr\u003e3.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e3.4.1 Properties\u003cbr\u003e3.4.2 Applications\u003cbr\u003e3.4.3 Pricing Trends\u003cbr\u003e3.5 Polycarbonate (PC)\u003cbr\u003e3.5.1 Properties\u003cbr\u003e3.5.2 Applications\u003cbr\u003e3.5.3 Pricing Trends\u003cbr\u003e3.6 Polyoxymethylene (POM)\u003cbr\u003e3.6.1 Properties\u003cbr\u003e3.6.2 Applications\u003cbr\u003e3.6.3 Pricing Trends\u003cbr\u003e3.7 Polymethylmethacrylate (PMMA)\u003cbr\u003e3.7.1 Properties\u003cbr\u003e3.7.2 Applications\u003cbr\u003e3.7.3 Pricing Trends\u003cbr\u003e3.8 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e3.8.1 Properties\u003cbr\u003e3.8.2 Applications\u003cbr\u003e3.8.3 Pricing Trends\u003cbr\u003e3.9 Polyphenylene Sulfide (PPS)\u003cbr\u003e3.9.1 Properties\u003cbr\u003e3.9.2 Applications\u003cbr\u003e3.9.3 Pricing Trends\u003cbr\u003e3.10 Polyetherimide (PEI)\u003cbr\u003e3.10.1 Properties\u003cbr\u003e3.10.2 Applications\u003cbr\u003e3.10.3 Pricing Trends\u003cbr\u003e3.11 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e3.11.1 Properties\u003cbr\u003e3.11.2 Applications\u003cbr\u003e3.11.3 Pricing Trends\u003cbr\u003e3.12 Polyphenylene Sulfone (PPSU)\u003cbr\u003e3.12.1 Properties\u003cbr\u003e3.12.2 Applications\u003cbr\u003e3.13 Liquid Crystal Polymers (LCP)\u003cbr\u003e3.13.1 Properties\u003cbr\u003e3.13.2 Applications\u003cbr\u003e3.13.3 Pricing Trends\u003cbr\u003e3.14 Polyetheretherketone (PEEK)\u003cbr\u003e3.14.1 Properties\u003cbr\u003e3.14.2 Applications\u003cbr\u003e3.14.3 Pricing Trends\u003cbr\u003e3.15 Polyphthalamide (PPA)\u003cbr\u003e3.15.1 Properties\u003cbr\u003e3.15.2 Applications\u003cbr\u003e3.16 Polyarylamide\u003cbr\u003e3.16.1 Properties\u003cbr\u003e3.16.2 Applications\u003cbr\u003e3.17 Polyamide-imide (PAI)\u003cbr\u003e3.17.1 Properties\u003cbr\u003e3.17.2 Applications\u003cbr\u003e3.18 Developing Materials\u003cbr\u003e3.18.1 Cyclic Olefin Copolymers\u003cbr\u003e3.18.2 Syndiotactic Polystyrene\u003cbr\u003e3.18.3 Cyclic Butylene Terephthalate (CBT)\u003cbr\u003e3.18.4 Copolycarbonate \u003cbr\u003e\u003cbr\u003e4 Global Demand for Engineering and High Performance Plastics\u003cbr\u003e4.1 Total World Demand\u003cbr\u003e4.1.1 Economic Background\u003cbr\u003e4.1.2 The Total World Market\u003cbr\u003e4.2 Demand Trends by Polymer Type, 1999-2002\u003cbr\u003e4.2.1 Polyamide (PA)\u003cbr\u003e4.2.2 Polybutylene Terephthalate (PBT)\u003cbr\u003e4.2.3 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e4.2.4 Polycarbonate (PC)\u003cbr\u003e4.2.5 Polyoxymethylene (POM)\u003cbr\u003e4.2.6 Polymethyl Methacrylate (PMMA)\u003cbr\u003e4.2.7 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e4.2.8 Polyphenylene Sulfide (PPS)\u003cbr\u003e4.2.9 Polyetherimide (PEI)\u003cbr\u003e4.2.10 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e4.2.11 Liquid Crystal Polymer (LCP)\u003cbr\u003e4.2.12 Polyetheretherketone (PEEK) \u003cbr\u003e\u003cbr\u003e5 Automotive Applications for Engineering and High Performance Plastics\u003cbr\u003e5.1 Introduction\u003cbr\u003e5.2 Future Prospects for the World Automotive Industry\u003cbr\u003e5.3 Future Trends for Engineering Polymers in Automotive Markets\u003cbr\u003e5.3.1 Recycling of End-of-Life-Vehicles EU Directive\u003cbr\u003e5.3.2 Proposed EU Legislation to Reduce Fuel Emissions\u003cbr\u003e5.3.3 Development of 'Mono-Material Systems'\u003cbr\u003e5.4 Polyamide\u003cbr\u003e5.4.1 Consumption Trends\u003cbr\u003e5.4.2 Current Applications\u003cbr\u003e5.4.3 Market Trends\u003cbr\u003e5.4.3.1 Inter-Polymer Substitution\u003cbr\u003e5.4.3.2 Competition from Metal\u003cbr\u003e5.4.3.3 Developments in Processing Technology\u003cbr\u003e5.4.3.4 Development of Hybrid Technology\u003cbr\u003e5.4.3.5 Development of In-Mould Painting Systems\u003cbr\u003e5.4.3.6 Development of the 42-Volt Electrical System\u003cbr\u003e5.4.3.7 New Applications Development\u003cbr\u003e5.5 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e5.5.1 Consumption Trends\u003cbr\u003e5.5.2 Current Applications\u003cbr\u003e5.5.3 Market Trends\u003cbr\u003e5.5.3.1 Replacement of Traditional Materials\u003cbr\u003e5.5.3.2 Inter-Polymer Substitution\u003cbr\u003e5.6 Polybutylene Terephthalate (PBT)\u003cbr\u003e5.6.1 Consumption Trends\u003cbr\u003e5.6.2 Current Applications\u003cbr\u003e5.6.3 Market Trends\u003cbr\u003e5.6.3.1 Growth in Electrical Applications\u003cbr\u003e5.6.3.2 Replacement of Metal Parts\u003cbr\u003e5.6.3.3 Inter-Polymer Substitution\u003cbr\u003e5.6.3.4 New Product Development\u003cbr\u003e5.7 Polycarbonate (PC)\u003cbr\u003e5.7.1 Consumption Trends\u003cbr\u003e5.7.2 Current Applications\u003cbr\u003e5.7.3 Market Trends\u003cbr\u003e5.7.3.1 Development of Automotive Glazing\u003cbr\u003e5.7.3.2 Replacement of Glass Lenses\u003cbr\u003e5.7.3.3 Inter-Polymer Substitution\u003cbr\u003e5.8 Polyoxymethylene (POM)\u003cbr\u003e5.8.1 Consumption Trends\u003cbr\u003e5.8.2 Current Applications\u003cbr\u003e5.8.3 Market Trends\u003cbr\u003e5.8.3.1 Inter-Polymer Substitution\u003cbr\u003e5.8.3.2 Product Developments\u003cbr\u003e5.8.3.3 Technology Development\u003cbr\u003e5.8.3.4 Growth in Electrical Systems\u003cbr\u003e5.8.3.5 Replacement of Metal\u003cbr\u003e5.9 Polymethyl Methacrylate (PMMA)\u003cbr\u003e5.9.1 Consumption Trends\u003cbr\u003e5.9.2 Current Applications\u003cbr\u003e5.9.3 Market Trends\u003cbr\u003e5.9.3.1 Replacement of Glass Car Headlamp Lenses\u003cbr\u003e5.9.3.2 New Applications Development\u003cbr\u003e5.9.3.3 Inter-Polymer Substitution\u003cbr\u003e5.10 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e5.10.1 Consumption Trends\u003cbr\u003e5.10.2 Current Applications\u003cbr\u003e5.10.3 Market Trends\u003cbr\u003e5.10.3.1 Inter-Polymer Substitution\u003cbr\u003e5.10.3.2 Development of New Applications\u003cbr\u003e5.10.3.3 New Product Development\u003cbr\u003e5.11 Polyphenylene Sulfide (PPS)\u003cbr\u003e5.11.1 Consumption Trends\u003cbr\u003e5.11.2 Current Applications\u003cbr\u003e5.11.3 Market Trends\u003cbr\u003e5.11.3.1 Replacement of Traditional Materials\u003cbr\u003e5.11.3.2 Inter-Polymer Substitution\u003cbr\u003e5.11.3.3 New Applications Development\u003cbr\u003e5.11.3.4 New Product Developments\u003cbr\u003e5.12 Polyetherimide (PEI)\u003cbr\u003e5.12.1 Consumption Trends\u003cbr\u003e5.12.2 Current Applications\u003cbr\u003e5.12.3 Market Trends\u003cbr\u003e5.12.3.1 Replacement of Traditional Materials\u003cbr\u003e5.12.3.2 Growth in Electrical Systems\u003cbr\u003e5.12.3.3 Inter-Polymer Substitution\u003cbr\u003e5.12.3.4 Product Development\u003cbr\u003e5.13 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e5.13.1 Consumption Trends\u003cbr\u003e5.13.2 Current Applications\u003cbr\u003e5.13.3 Market Trends\u003cbr\u003e5.13.3.1 Replacement of Thermosets\u003cbr\u003e5.14 Liquid Crystal Polymers (LCP)\u003cbr\u003e5.14.1 Consumption Trends\u003cbr\u003e5.14.2 Current Applications\u003cbr\u003e5.14.3 Market Trends\u003cbr\u003e5.14.3.1 Lead-Free Soldering Methods\u003cbr\u003e5.14.3.2 Material Replacement\u003cbr\u003e5.15 Polyetheretherketone (PEEK)\u003cbr\u003e5.15.1 Consumption Trends\u003cbr\u003e5.15.2 Current Applications\u003cbr\u003e5.15.3 Market Trends\u003cbr\u003e5.15.3.1 New Applications\u003cbr\u003e5.16 Polyphthalamide (PPA)\u003cbr\u003e5.16.1 Consumption Trends\u003cbr\u003e5.16.2 Current Applications\u003cbr\u003e5.16.3 Market Trends\u003cbr\u003e5.16.3.1 New Applications \u003cbr\u003e\u003cbr\u003e6 Electrical and Electronics Applications for Engineering and High Performance Plastics\u003cbr\u003e6.1 Introduction\u003cbr\u003e6.2 Trends and Market Drivers\u003cbr\u003e6.3 Future Prospects for the World E\u0026amp;E Industry\u003cbr\u003e6.4 Developments in Industry Regulations and Standards\u003cbr\u003e6.4.1 The EU Directive on Electrical \u0026amp; Electronics Waste\u003cbr\u003e6.4.2 EU Directive (IEC-60335-1) on Unattended Domestic Appliances\u003cbr\u003e6.5 Polyamide\u003cbr\u003e6.5.1 Consumption Trends\u003cbr\u003e6.5.2 Current Applications\u003cbr\u003e6.5.3 Market Trends\u003cbr\u003e6.5.3.1 Product Developments\u003cbr\u003e6.5.3.2 Inter-Polymer Substitution\u003cbr\u003e6.6 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e6.6.1 Consumption Trends\u003cbr\u003e6.6.2 Current Applications\u003cbr\u003e6.6.3 Market Trends\u003cbr\u003e6.7 Polybutylene Terephthalate (PBT)\u003cbr\u003e6.7.1 Consumption Trends\u003cbr\u003e6.7.2 Current Applications\u003cbr\u003e6.7.3 Market Trends\u003cbr\u003e6.7.3.1 New Products\u003cbr\u003e6.7.3.2 Development of PBT Polymer Blends\u003cbr\u003e6.7.3.3 Lead-Free Soldering Methods\u003cbr\u003e6.8 Polycarbonate (PC)\u003cbr\u003e6.8.1 Consumption Trends\u003cbr\u003e6.8.2 Current Applications\u003cbr\u003e6.8.3 Market Trends\u003cbr\u003e6.9 Polyoxymethylene (POM)\u003cbr\u003e6.9.1 Consumption Trends\u003cbr\u003e6.9.2 Current Applications\u003cbr\u003e6.9.3 Market Trends\u003cbr\u003e6.10 Polymethyl Methacrylate (PMMA)\u003cbr\u003e6.10.1 Consumption Trends\u003cbr\u003e6.10.2 Current Applications\u003cbr\u003e6.10.3 Market Trends\u003cbr\u003e6.11 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e6.11.1 Consumption Trends\u003cbr\u003e6.11.2 Current Applications\u003cbr\u003e6.11.3 Market Trends\u003cbr\u003e6.12 Polyphenylene Sulfide (PPS)\u003cbr\u003e6.12.1 Consumption Trends\u003cbr\u003e6.12.2 Current Applications\u003cbr\u003e6.12.3 Market Trends\u003cbr\u003e6.13 Polyetherimide (PEI)\u003cbr\u003e6.13.1 Consumption Trends\u003cbr\u003e6.13.2 Current Applications\u003cbr\u003e6.13.3 Market Trends\u003cbr\u003e6.14 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e6.14.1 Consumption Trends\u003cbr\u003e6.14.2 Current Applications\u003cbr\u003e6.14.3 Market Trends\u003cbr\u003e6.14.3.1 Inter-Polymer Substitution\u003cbr\u003e6.14.3.2 New Applications\u003cbr\u003e6.15 Liquid Crystal Polymers (LCP)\u003cbr\u003e6.15.1 Consumption Trends\u003cbr\u003e6.15.2 Current Applications\u003cbr\u003e6.15.3 Market Trends\u003cbr\u003e6.15.3.1 Inter-Polymer Substitution\u003cbr\u003e6.15.3.2 New Applications\u003cbr\u003e6.15.3.3 Lead-Free Soldering Methods\u003cbr\u003e6.16 Polyetheretherketone (PEEK)\u003cbr\u003e6.16.1 Consumption Trends\u003cbr\u003e6.16.2 Current Applications\u003cbr\u003e6.16.3 Market Trends\u003cbr\u003e6.17 Polyphthalamide (PPA)\u003cbr\u003e6.17.1 Current Applications\u003cbr\u003e6.17.2 Market Trends \u003cbr\u003e\u003cbr\u003e7 Industrial Applications for Engineering and High Performance Plastics\u003cbr\u003e7.1 Introduction\u003cbr\u003e7.2 Future Prospects for Industrial Markets\u003cbr\u003e7.3 Polyamide\u003cbr\u003e7.3.1 Consumption Trends\u003cbr\u003e7.3.2 Current Applications\u003cbr\u003e7.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e7.4.1 Consumption Trends\u003cbr\u003e7.4.2 Current Applications\u003cbr\u003e7.5 Polybutylene Terephthalate (PBT)\u003cbr\u003e7.5.1 Consumption Trends\u003cbr\u003e7.5.2 Current Applications\u003cbr\u003e7.6 Polyoxymethylene (POM)\u003cbr\u003e7.6.1 Consumption Trends\u003cbr\u003e7.6.2 Current Applications\u003cbr\u003e7.7 Polycarbonate (PC)\u003cbr\u003e7.7.1 Consumption Trends\u003cbr\u003e7.7.2 Current Applications\u003cbr\u003e7.8 Polymethyl methacrylate (PMMA)\u003cbr\u003e7.8.1 Consumption Trends\u003cbr\u003e7.8.2 Current Applications\u003cbr\u003e7.9 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e7.9.1 Consumption Trends\u003cbr\u003e7.9.2 Current Applications\u003cbr\u003e7.10 Polyphenylene Sulfide (PPS)\u003cbr\u003e7.10.1 Consumption Trends\u003cbr\u003e7.10.2 Current Applications\u003cbr\u003e7.11 Polyetherimide (PEI)\u003cbr\u003e7.11.1 Consumption Trends\u003cbr\u003e7.11.2 Current Applications\u003cbr\u003e7.12 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e7.12.1 Consumption Trends\u003cbr\u003e7.12.2 Current Applications\u003cbr\u003e7.13 Liquid Crystal Polymers (LCP)\u003cbr\u003e7.13.1 Consumption Trends\u003cbr\u003e7.13.2 Current Applications\u003cbr\u003e7.14 Polyetheretherketone (PEEK)\u003cbr\u003e7.14.1 Consumption Trends\u003cbr\u003e7.14.2 Current Applications \u003cbr\u003e\u003cbr\u003e8 Consumer Product Markets for Engineering and High Performance Plastics\u003cbr\u003e8.1 Introduction\u003cbr\u003e8.1.1 Washing Machines\u003cbr\u003e8.1.2 Vacuum Cleaners\u003cbr\u003e8.1.3 Cookers\u003cbr\u003e8.1.4 Fridges\u003cbr\u003e8.1.5 Microwave Ovens\u003cbr\u003e8.1.6 Food Containers\u003cbr\u003e8.1.7 Lawnmowers\u003cbr\u003e8.1.8 Electric Irons\u003cbr\u003e8.1.9 Shavers\u003cbr\u003e8.1.10 Fryers\u003cbr\u003e8.1.11 Personal Hygiene\u003cbr\u003e8.1.12 Food Mixers\u003cbr\u003e8.2 Future Prospects for the Consumer Products Market\u003cbr\u003e8.3 Market Trends\u003cbr\u003e8.3.1 Growing Use of Special Effects Resins\u003cbr\u003e8.4 Polyamide\u003cbr\u003e8.4.1 Consumption Trends\u003cbr\u003e8.4.2 Current Applications\u003cbr\u003e8.5 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e8.5.1 Consumption Trends\u003cbr\u003e8.5.2 Current Applications\u003cbr\u003e8.6 Polybutylene Terephthalate (PBT)\u003cbr\u003e8.6.1 Consumption Trends\u003cbr\u003e8.6.2 Current Applications\u003cbr\u003e8.7 Polycarbonate (PC)\u003cbr\u003e8.7.1 Consumption Trends\u003cbr\u003e8.7.2 Current Applications\u003cbr\u003e8.8 Polyoxymethylene (POM)\u003cbr\u003e8.8.1 Consumption Trends\u003cbr\u003e8.8.2 Current Applications\u003cbr\u003e8.9 Polymethyl Methacrylate (PMMA)\u003cbr\u003e8.9.1 Consumption Trends\u003cbr\u003e8.9.2 Current Applications\u003cbr\u003e8.10 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e8.10.1 Consumption Trends\u003cbr\u003e8.10.2 Current Applications\u003cbr\u003e8.11 Polyphenylene Sulfide (PPS)\u003cbr\u003e8.11.1 Consumption Trends\u003cbr\u003e8.11.2 Current Applications\u003cbr\u003e8.12 Polyetherimide (PEI)\u003cbr\u003e8.12.1 Consumption Trends\u003cbr\u003e8.12.2 Current Applications\u003cbr\u003e8.13 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e8.13.1 Consumption Trends\u003cbr\u003e8.13.2 Current Applications\u003cbr\u003e8.14 Liquid Crystal Polymers (LCP)\u003cbr\u003e8.14.1 Consumption Trends\u003cbr\u003e8.14.2 Current Applications \u003cbr\u003e\u003cbr\u003e9 Other Markets for Engineering and High Performance Plastics\u003cbr\u003e9.1 Introduction\u003cbr\u003e9.2 Future Prospects for the Medical Devices Market\u003cbr\u003e9.3 Polyamide\u003cbr\u003e9.3.1 Consumption Trends\u003cbr\u003e9.3.2 Current Applications\u003cbr\u003e9.3.2.1 Film and Sheet\u003cbr\u003e9.3.2.2 Stock Shapes\u003cbr\u003e9.3.2.3 Other Markets\u003cbr\u003e9.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e9.4.1 Consumption Trends\u003cbr\u003e9.4.2 Current Applications\u003cbr\u003e9.5 Polybutylene Terephthalate (PBT)\u003cbr\u003e9.5.1 Consumption Trends\u003cbr\u003e9.5.2 Current Applications\u003cbr\u003e9.6 Polycarbonate (PC)\u003cbr\u003e9.6.1 Consumption Trends\u003cbr\u003e9.6.2 Current Applications\u003cbr\u003e9.7 Polyoxymethylene (POM)\u003cbr\u003e9.7.1 Consumption Trends\u003cbr\u003e9.7.2 Current Applications\u003cbr\u003e9.8 Polymethyl Methacrylate (PMMA)\u003cbr\u003e9.8.1 Consumption Trends\u003cbr\u003e9.8.2 Current Applications\u003cbr\u003e9.8.2.1 Optical Media\u003cbr\u003e9.8.2.2 Medical Devices\u003cbr\u003e9.8.2.3 Packaging\u003cbr\u003e9.9 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e9.9.1 Consumption Trends\u003cbr\u003e9.9.2 Current Applications\u003cbr\u003e9.10 Polyphenylene Sulfide (PPS)\u003cbr\u003e9.10.1 Consumption Trends\u003cbr\u003e9.10.2 Current Applications\u003cbr\u003e9.11 Polyetherimide (PEI)\u003cbr\u003e9.11.1 Consumption Trends\u003cbr\u003e9.11.2 Current Applications\u003cbr\u003e9.12 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e9.12.1 Consumption Trends\u003cbr\u003e9.12.2 Current Applications\u003cbr\u003e9.13 Liquid Crystal Polymers (LCP)\u003cbr\u003e9.13.1 Consumption Trends\u003cbr\u003e9.13.2 Current Applications\u003cbr\u003e9.14 Polyetheretherketone (PEEK)\u003cbr\u003e9.14.1 Consumption Trends\u003cbr\u003e9.14.2 Current Applications \u003cbr\u003e\u003cbr\u003e10 Leading World Suppliers of Engineering and High Performance Plastics\u003cbr\u003e10.1 Overview\u003cbr\u003e10.2 Polyamide (PA)\u003cbr\u003e10.2.1 Major Suppliers\u003cbr\u003e10.2.2 Products\u003cbr\u003e10.3 Polybutylene Terephthalate (PBT)\u003cbr\u003e10.3.1 Major Suppliers\u003cbr\u003e10.3.2 Products\u003cbr\u003e10.4 Acrylonitrile-Butadiene-Styrene (ABS)\u003cbr\u003e10.4.1 Major Suppliers\u003cbr\u003e10.4.2 Products\u003cbr\u003e10.5 Polycarbonate (PC)\u003cbr\u003e10.5.1 Major Suppliers\u003cbr\u003e10.5.2 Products\u003cbr\u003e10.6 Polyoxymethylene (POM)\u003cbr\u003e10.6.1 Major Suppliers\u003cbr\u003e10.6.2 Products\u003cbr\u003e10.7 Polymethyl Methacrylate (PMMA)\u003cbr\u003e10.7.1 Major Suppliers\u003cbr\u003e10.7.2 Products\u003cbr\u003e10.8 Polyphenylene Oxide (Ether) Blends (PPO and PPE)\u003cbr\u003e10.8.1 Major Suppliers\u003cbr\u003e10.8.2 Products\u003cbr\u003e10.9 Polyphenylene Sulfide (PPS)\u003cbr\u003e10.9.1 Major Suppliers\u003cbr\u003e10.9.2 Products\u003cbr\u003e10.10 Polyetherimide (PEI)\u003cbr\u003e10.10.1 Major Suppliers\u003cbr\u003e10.10.2 Products\u003cbr\u003e10.11 Polysulfone (PSU), Polyethersulfone (PES)\u003cbr\u003e10.11.1 Major Suppliers\u003cbr\u003e10.11.2 Products\u003cbr\u003e10.12 Liquid Crystal Polymers (LCP)\u003cbr\u003e10.12.1 Major Suppliers\u003cbr\u003e10.12.2 Products\u003cbr\u003e10.13 Polyetheretherketone (PEEK)\u003cbr\u003e10.13.1 Major Suppliers\u003cbr\u003e10.13.2 Products\u003cbr\u003e10.14 Polyphthalamide (PPA)\u003cbr\u003e10.14.1 Major Suppliers\u003cbr\u003e10.14.2 Products\u003cbr\u003eDirectory of Major Suppliers\u003cbr\u003eAbbreviations and Acronyms\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDavid Platt graduated from the University of Nottingham with an Economics degree before completing an MBA at the University of Bradford. He joined a leading international market consultancy where he specialized in plastics sector research. He conducted a wide range of multi-client and single-client studies covering a wide range of materials, from standard thermoplastics, engineering and high performance polymers for conductive polymers and thermoplastic elastomers. He also completed market studies on plastics in automotive, packaging, wire \u0026amp; cable, pipe, and medical devices."}
Engineering Elastomers...
$180.00
{"id":11242230660,"title":"Engineering Elastomers 2003","handle":"978-1-85957-369-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Geneva, Switzerland, 13-14 November 2003 \u003cbr\u003eISBN 978-1-85957-369-3 \u003cbr\u003e\u003cbr\u003epages 210\n\u003ch5\u003eSummary\u003c\/h5\u003e\nEngineering or specialty elastomers are the stalwart materials of the rubber industry. They are high volume and medium priced elastomers, often employed in demanding applications, such as the automotive, industrial, medical and electrical industries. The Engineering Elastomers 2003 conference had an exciting series of papers from authors in both Europe and the USA, addressing the opportunities for growth in engineering elastomers, as well as the challenges to producers and users operating in a rapidly changing competitive environment.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003eList of Papers\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eSession 1 Market Review\u003cbr\u003ePaper 1 - Elastomers and Feedstocks: A Market Outlook\u003cbr\u003ePaper 2 - An Overview of the Engineering Elastomer Industry in 2003 \u003cbr\u003e\u003cbr\u003eSession 2 Advances in Compounding and Production\u003cbr\u003ePaper 3 - Functionalisation of Polymers \u0026amp; Compatibilisation of Polymer Blends by a Novel Reactive Processing Approach\u003cbr\u003ePaper 4 - Precrosslinked Engineering Elastomers - What Are the Benefits? PAPER UNAVAILABLE AT TIME OF PRINT\u003cbr\u003ePaper 5 - High-Hardness Compounds in Papermill Roll Covers and the Role of Fillers Networking in their Dynamic Performance PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003ePaper 6 - Use of the NFM Iddon Cold Feed Extruder and Novel Low Temperature Curing EPDM to Reduce Processing and Curing Energy Consumption \u003cbr\u003e\u003cbr\u003eSession 3 Advances in Elastomers\u003cbr\u003ePaper 7 - Silicone Rubber – Looking Forward to the Next 60 Years!\u003cbr\u003ePaper 8 - Vistamaxx ™ - Novel Polyolefin Speciality Elastomers\u003cbr\u003ePaper 9 - HNBR - A Very Versatile Engineering Elastomer\u003cbr\u003ePaper 10 - Recent Progress in the Processing Performance of Compounds made with Viton® Fluoroelastomers PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003e\u003cbr\u003eSession 4 Additives and Vulcanising Agents\u003cbr\u003ePaper 11 - Lead-free Curing Systems for ECO – Comparison of Different Solutions\u003cbr\u003ePaper 12 - New High Purity Vulcanization Accelerator \u003cbr\u003e\u003cbr\u003eSession 5: Technologies and Materials Analysis\u003cbr\u003ePaper 13 - Analyses of Two-component Injected Parts\u003cbr\u003ePaper 14 - Rubber Fails in Tension - Mechanical Strength of Elastomeric Materials at Ambient and Elevated Temperatures \u003cbr\u003e\u003cbr\u003eSession 6: Developments In Production And Processing Technologies And Equipment\u003cbr\u003ePaper 15 - MIPs (Multi-Ingredient-Preweighs) unique improvements of process variation and dispersion by preblending chemicals\u003cbr\u003ePaper 16 - Latest Developments in Production Equipment, Moulds, and Automation for Processing of Engineering Elastomers\u003cbr\u003ePaper 17 - New Developments for the Optimisation of High Injection Moulded Elastomers Using 3D Simulation\u003cbr\u003ePaper 18 - Latest Developments in Thermal Balance Control in the Moulds \u003cbr\u003e\u003cbr\u003eSession 7 Inter-materials Competition\u003cbr\u003ePaper 19 - Weathersealing Sytems using Thermoplastic Vulcanizates and Thermoplastic Olefins\u003cbr\u003ePaper 20 - A unique closed cell sponge rubber material offering self-extinguishing and low smoke emission properties\u003cbr\u003ePaper 21 - Fluoroprene ™; A High Performance Fluorocarbon TPV \u003cbr\u003e\u003cbr\u003eSession 8 Developments In End Use Applications\u003cbr\u003ePaper 22 - Nordel® MG - “The Game Changer” - ... For TPV\u003cbr\u003ePaper 23 - Computer Aided Engineering of Elastomeric Components for Automobile Applications +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 24 eBusiness as Supporting Tool for Operation Excellence +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 25 - Elastomers in the Gas Industry in the Light of User Safety Requirements\u003cbr\u003ePaper 26 - Expanding the Applications of EPDM\/EPM Elastomers in the Pharmaceutical and Food Industries\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:15-04:00","created_at":"2017-06-22T21:14:15-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2003","acrylate rubber","additives","blends","book","compatibilisation","curing","curing systems","elastomers","engineering elastomers","EPDM","fillers","food","functionalisation","High-Hardness","molding","moulding","networking","Novel","pharmaceutical","polymers","precrosslinked","r-compounding","rubber","silicone rubber","temperature"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378402308,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Engineering Elastomers 2003","public_title":null,"options":["Default Title"],"price":18000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-369-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079","options":["Title"],"media":[{"alt":null,"id":361602744413,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-369-3.jpg?v=1499914079","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Geneva, Switzerland, 13-14 November 2003 \u003cbr\u003eISBN 978-1-85957-369-3 \u003cbr\u003e\u003cbr\u003epages 210\n\u003ch5\u003eSummary\u003c\/h5\u003e\nEngineering or specialty elastomers are the stalwart materials of the rubber industry. They are high volume and medium priced elastomers, often employed in demanding applications, such as the automotive, industrial, medical and electrical industries. The Engineering Elastomers 2003 conference had an exciting series of papers from authors in both Europe and the USA, addressing the opportunities for growth in engineering elastomers, as well as the challenges to producers and users operating in a rapidly changing competitive environment.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003eList of Papers\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003eSession 1 Market Review\u003cbr\u003ePaper 1 - Elastomers and Feedstocks: A Market Outlook\u003cbr\u003ePaper 2 - An Overview of the Engineering Elastomer Industry in 2003 \u003cbr\u003e\u003cbr\u003eSession 2 Advances in Compounding and Production\u003cbr\u003ePaper 3 - Functionalisation of Polymers \u0026amp; Compatibilisation of Polymer Blends by a Novel Reactive Processing Approach\u003cbr\u003ePaper 4 - Precrosslinked Engineering Elastomers - What Are the Benefits? PAPER UNAVAILABLE AT TIME OF PRINT\u003cbr\u003ePaper 5 - High-Hardness Compounds in Papermill Roll Covers and the Role of Fillers Networking in their Dynamic Performance PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003ePaper 6 - Use of the NFM Iddon Cold Feed Extruder and Novel Low Temperature Curing EPDM to Reduce Processing and Curing Energy Consumption \u003cbr\u003e\u003cbr\u003eSession 3 Advances in Elastomers\u003cbr\u003ePaper 7 - Silicone Rubber – Looking Forward to the Next 60 Years!\u003cbr\u003ePaper 8 - Vistamaxx ™ - Novel Polyolefin Speciality Elastomers\u003cbr\u003ePaper 9 - HNBR - A Very Versatile Engineering Elastomer\u003cbr\u003ePaper 10 - Recent Progress in the Processing Performance of Compounds made with Viton® Fluoroelastomers PAPER UNAVAILABLE AT TIME OF PRINT \u003cbr\u003e\u003cbr\u003eSession 4 Additives and Vulcanising Agents\u003cbr\u003ePaper 11 - Lead-free Curing Systems for ECO – Comparison of Different Solutions\u003cbr\u003ePaper 12 - New High Purity Vulcanization Accelerator \u003cbr\u003e\u003cbr\u003eSession 5: Technologies and Materials Analysis\u003cbr\u003ePaper 13 - Analyses of Two-component Injected Parts\u003cbr\u003ePaper 14 - Rubber Fails in Tension - Mechanical Strength of Elastomeric Materials at Ambient and Elevated Temperatures \u003cbr\u003e\u003cbr\u003eSession 6: Developments In Production And Processing Technologies And Equipment\u003cbr\u003ePaper 15 - MIPs (Multi-Ingredient-Preweighs) unique improvements of process variation and dispersion by preblending chemicals\u003cbr\u003ePaper 16 - Latest Developments in Production Equipment, Moulds, and Automation for Processing of Engineering Elastomers\u003cbr\u003ePaper 17 - New Developments for the Optimisation of High Injection Moulded Elastomers Using 3D Simulation\u003cbr\u003ePaper 18 - Latest Developments in Thermal Balance Control in the Moulds \u003cbr\u003e\u003cbr\u003eSession 7 Inter-materials Competition\u003cbr\u003ePaper 19 - Weathersealing Sytems using Thermoplastic Vulcanizates and Thermoplastic Olefins\u003cbr\u003ePaper 20 - A unique closed cell sponge rubber material offering self-extinguishing and low smoke emission properties\u003cbr\u003ePaper 21 - Fluoroprene ™; A High Performance Fluorocarbon TPV \u003cbr\u003e\u003cbr\u003eSession 8 Developments In End Use Applications\u003cbr\u003ePaper 22 - Nordel® MG - “The Game Changer” - ... For TPV\u003cbr\u003ePaper 23 - Computer Aided Engineering of Elastomeric Components for Automobile Applications +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 24 eBusiness as Supporting Tool for Operation Excellence +++ PAPER UNAVAILABLE AT TIME OF PRINT +++\u003cbr\u003ePaper 25 - Elastomers in the Gas Industry in the Light of User Safety Requirements\u003cbr\u003ePaper 26 - Expanding the Applications of EPDM\/EPM Elastomers in the Pharmaceutical and Food Industries\u003cbr\u003e\u003cbr\u003e"}
Engineering Plastics
$205.00
{"id":11242242372,"title":"Engineering Plastics","handle":"9781847355683","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: T.R Crampton \u003cbr\u003eISBN 9781847355683 \u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePublished: 2014\u003cbr\u003e\u003c\/span\u003e264 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nGenerally speaking, engineering plastics are those which are replacing conventional materials such as metals and alloys in general engineering. In addition, the term 'engineering plastic' covers materials that have superior properties which were not particularly available in conventional polymeric materials such as the exceptionally high heat resistance of polyimides and polysulfides. In addition to conventional materials engineering polymers include materials as diverse as polyether ether ketone, polyimide, polyether-imide and polysulfides.\u003cbr\u003e\u003cbr\u003eThe mechanical, electrical and thermal properties of polymers are discussed as are other diverse applications such as solvent and detergent resistance, frictional and hardness properties, food packaging applications and gas barrier properties. I addition a very important application is discussed of the resistance of plastics to gamma and others form of radiation namely their use nuclear industry, medical applications and food sterilisation\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction\u003cbr\u003e1.1 Mechanical Applications \u003cbr\u003e1.2 Electrical Applications \u003cbr\u003e1.3 Thermal Applications\u003cbr\u003e1.4 Miscellaneous Applications \u003cbr\u003e1.5 Significant Polymer Properties \u003cbr\u003e2. Mechanical Properties\u003cbr\u003e2.1 Review of Mechanical Properties\u003cbr\u003e2.2 Mechanical Properties of Unreinforced Polymers\u003cbr\u003e2.3 Reinforced Plastics\u003cbr\u003e2.4 Comparison of Mechanical Properties of Virgin and Reinforced Plastics\u003cbr\u003e2.5 Mechanical Properties of Particular Polymers\u003cbr\u003e2.6 Use of Lubricating Agents in Engineering Polymer Formulations \u003cbr\u003e3. Thermal Properties of Polymers\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Thermal Expansion Coefficient\u003cbr\u003e3.3 Mould Shrinkage\u003cbr\u003e3.4 Melting Temperature or Softening Point\u003cbr\u003e3.5 Maximum Operating Temperature\u003cbr\u003e3.6 Brittleness Temperature (Low Temperature Embrittlement Temperature)\u003cbr\u003e3.7 Heat Distortion Temperature \u003cbr\u003e3.8 Thermal Conductivity\u003cbr\u003e3.9 Specific Heat\u003cbr\u003e3.10 Thermal Diffusivity\u003cbr\u003e3.11 Thermal Insulation Indexder RWTH Aachen, Germany\u003cbr\u003e3.12 Glass Transition Temperature\u003cbr\u003e3.13 Alpha, Beta, Gamma Transitions\u003cbr\u003e3.14 Developments in High Temperature Plastics\u003cbr\u003e4. Electrical Properties of Plastics\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Typical Electrical Properties of a Range of Engineering Polymers\u003cbr\u003e4.3 Effect of Reinforcing Agents on Electrical Properties\u003cbr\u003e4.4 Applications of High Dielectric Strength Polymers \u003cbr\u003e4.5 Effect of Reinforcing Agents on Electrical and Mechanical Properties\u003cbr\u003e4.6 Electrical Properties\u003cbr\u003e4.7 Electrically conductive\u003cbr\u003e4.8 Fire Retardant Plastics for the Electrical Industry\u003cbr\u003e5. Miscellaneous Polymer Properties\u003cbr\u003e5.1 Abrasion Resistance and Wear\u003cbr\u003e5.2 Fatigue Index\u003cbr\u003e5.3 Coefficient of Friction\u003cbr\u003e5.4 Surface Hardness\u003cbr\u003e5.5 Haze, Glass and Surface Roughness\u003cbr\u003e5.6 Weathering Properties of Engineering Plastics\u003cbr\u003e5.7 Chemical Resistance\u003cbr\u003e5.8 Detergent Resistance \u003cbr\u003e5.9 Solvent Resistance\u003cbr\u003e5.10 Hydrolytic Stability and Water Absorption\u003cbr\u003e5.11 Gas Barrier Properties of Plastics \u003cbr\u003e5.12 Prediction of Polymer Service Lifetimes\u003cbr\u003e6 Plastics in Automotive Engineering\u003cbr\u003e6.1 Applications\u003cbr\u003e6.2 Acoustic Properties of Polymers\u003cbr\u003e6.3 End of Life of Vehicles\u003cbr\u003e6.4 Miscellaneous\u003cbr\u003e7 Plastics in Aerospace\u003cbr\u003e7.1 Applications\u003cbr\u003e7.2 Glass Fiber Reinforced Plastics\u003cbr\u003e7.3 Carbon Fiber Reinforced Nanocomposite Plastics\u003cbr\u003e7.4 Pitched Fiber Cyanate Ester Composite \u003cbr\u003e7.5 Recent Developments \u003cbr\u003e8 Other Engineering Applications\u003cbr\u003e8.1 General Engineering Applications\u003cbr\u003e8.2 Building Materials\u003cbr\u003e8.3 Plastics in Electrochemical Cells\u003cbr\u003e8.4 Polymers in Medical Devices\u003cbr\u003e8.5 Gas Barrier Properties \u003cbr\u003e8.6 Foam Insulation\u003cbr\u003e8.7 Radiation Resistance of Engineering Plastics","published_at":"2017-06-22T21:14:51-04:00","created_at":"2017-06-22T21:14:51-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2014","aerospace","book","building automotive","electronics","engineering plastics","material","mechanical properties","medical application","nuclear industry","plastics","polymers","thermal properties"],"price":20500,"price_min":20500,"price_max":20500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378443396,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Engineering Plastics","public_title":null,"options":["Default Title"],"price":20500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"9781847355683","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/9781847355683.jpg?v=1500216488"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/9781847355683.jpg?v=1500216488","options":["Title"],"media":[{"alt":null,"id":354794733661,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/9781847355683.jpg?v=1500216488"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/9781847355683.jpg?v=1500216488","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: T.R Crampton \u003cbr\u003eISBN 9781847355683 \u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003ePublished: 2014\u003cbr\u003e\u003c\/span\u003e264 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nGenerally speaking, engineering plastics are those which are replacing conventional materials such as metals and alloys in general engineering. In addition, the term 'engineering plastic' covers materials that have superior properties which were not particularly available in conventional polymeric materials such as the exceptionally high heat resistance of polyimides and polysulfides. In addition to conventional materials engineering polymers include materials as diverse as polyether ether ketone, polyimide, polyether-imide and polysulfides.\u003cbr\u003e\u003cbr\u003eThe mechanical, electrical and thermal properties of polymers are discussed as are other diverse applications such as solvent and detergent resistance, frictional and hardness properties, food packaging applications and gas barrier properties. I addition a very important application is discussed of the resistance of plastics to gamma and others form of radiation namely their use nuclear industry, medical applications and food sterilisation\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction\u003cbr\u003e1.1 Mechanical Applications \u003cbr\u003e1.2 Electrical Applications \u003cbr\u003e1.3 Thermal Applications\u003cbr\u003e1.4 Miscellaneous Applications \u003cbr\u003e1.5 Significant Polymer Properties \u003cbr\u003e2. Mechanical Properties\u003cbr\u003e2.1 Review of Mechanical Properties\u003cbr\u003e2.2 Mechanical Properties of Unreinforced Polymers\u003cbr\u003e2.3 Reinforced Plastics\u003cbr\u003e2.4 Comparison of Mechanical Properties of Virgin and Reinforced Plastics\u003cbr\u003e2.5 Mechanical Properties of Particular Polymers\u003cbr\u003e2.6 Use of Lubricating Agents in Engineering Polymer Formulations \u003cbr\u003e3. Thermal Properties of Polymers\u003cbr\u003e3.1 Introduction\u003cbr\u003e3.2 Thermal Expansion Coefficient\u003cbr\u003e3.3 Mould Shrinkage\u003cbr\u003e3.4 Melting Temperature or Softening Point\u003cbr\u003e3.5 Maximum Operating Temperature\u003cbr\u003e3.6 Brittleness Temperature (Low Temperature Embrittlement Temperature)\u003cbr\u003e3.7 Heat Distortion Temperature \u003cbr\u003e3.8 Thermal Conductivity\u003cbr\u003e3.9 Specific Heat\u003cbr\u003e3.10 Thermal Diffusivity\u003cbr\u003e3.11 Thermal Insulation Indexder RWTH Aachen, Germany\u003cbr\u003e3.12 Glass Transition Temperature\u003cbr\u003e3.13 Alpha, Beta, Gamma Transitions\u003cbr\u003e3.14 Developments in High Temperature Plastics\u003cbr\u003e4. Electrical Properties of Plastics\u003cbr\u003e4.1 Introduction\u003cbr\u003e4.2 Typical Electrical Properties of a Range of Engineering Polymers\u003cbr\u003e4.3 Effect of Reinforcing Agents on Electrical Properties\u003cbr\u003e4.4 Applications of High Dielectric Strength Polymers \u003cbr\u003e4.5 Effect of Reinforcing Agents on Electrical and Mechanical Properties\u003cbr\u003e4.6 Electrical Properties\u003cbr\u003e4.7 Electrically conductive\u003cbr\u003e4.8 Fire Retardant Plastics for the Electrical Industry\u003cbr\u003e5. Miscellaneous Polymer Properties\u003cbr\u003e5.1 Abrasion Resistance and Wear\u003cbr\u003e5.2 Fatigue Index\u003cbr\u003e5.3 Coefficient of Friction\u003cbr\u003e5.4 Surface Hardness\u003cbr\u003e5.5 Haze, Glass and Surface Roughness\u003cbr\u003e5.6 Weathering Properties of Engineering Plastics\u003cbr\u003e5.7 Chemical Resistance\u003cbr\u003e5.8 Detergent Resistance \u003cbr\u003e5.9 Solvent Resistance\u003cbr\u003e5.10 Hydrolytic Stability and Water Absorption\u003cbr\u003e5.11 Gas Barrier Properties of Plastics \u003cbr\u003e5.12 Prediction of Polymer Service Lifetimes\u003cbr\u003e6 Plastics in Automotive Engineering\u003cbr\u003e6.1 Applications\u003cbr\u003e6.2 Acoustic Properties of Polymers\u003cbr\u003e6.3 End of Life of Vehicles\u003cbr\u003e6.4 Miscellaneous\u003cbr\u003e7 Plastics in Aerospace\u003cbr\u003e7.1 Applications\u003cbr\u003e7.2 Glass Fiber Reinforced Plastics\u003cbr\u003e7.3 Carbon Fiber Reinforced Nanocomposite Plastics\u003cbr\u003e7.4 Pitched Fiber Cyanate Ester Composite \u003cbr\u003e7.5 Recent Developments \u003cbr\u003e8 Other Engineering Applications\u003cbr\u003e8.1 General Engineering Applications\u003cbr\u003e8.2 Building Materials\u003cbr\u003e8.3 Plastics in Electrochemical Cells\u003cbr\u003e8.4 Polymers in Medical Devices\u003cbr\u003e8.5 Gas Barrier Properties \u003cbr\u003e8.6 Foam Insulation\u003cbr\u003e8.7 Radiation Resistance of Engineering Plastics"}
Environanotechnology
$175.00
{"id":11242249540,"title":"Environanotechnology","handle":"978-0-08-054820-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited By Maohong Fan, C.P. Huang, Alan E. Bland, Zhonglin Wang, Rachid Slimane \u0026amp; Ian G. Wright \u003cbr\u003eISBN 978-0-08-054820-3 \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e310 pages\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cb\u003eKey Features: \u003c\/b\u003ePresents research results from a number of countries with various nanotechnologies in multidisciplinary environmental engineering fields\u003cbr\u003eGives a solid introduction to the basic theories needed for understanding how environanotechnologies can be developed cost-effectively, and when they should be applied in a responsible manner\u003cbr\u003eIncludes worked examples that put environmental problems in context to show the actual connections between nanotechnology and environmental engineering\u003cbr\u003e\u003cb\u003eDescription \u003c\/b\u003eUnderstanding and utilizing the interactions between environment and nanoscale materials is a new way to resolve the increasingly challenging environmental issues we are facing and will continue to face. Environanotechnology is the nanoscale technology developed for monitoring the quality of the environment, treating water and wastewater, as well as controlling air pollutants. Therefore, the applications of nanotechnology in environmental engineering have been of great interest to many fields and consequently, a fair amount of research on the use of nanoscale materials for dealing with environmental issues has been conducted.\u003cbr\u003eThe aim of this book is to report on the results recently achieved in different countries. It provides useful technological information for environmental scientists and will assist them in creating cost-effective nanotechnologies to solve critical environmental problems, including those associated with energy production.\u003cbr\u003eLeadership, graduate students, postgraduate students, researchers and chemical engineers\/environmental engineers\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface\u003cbr\u003e1.Responses of Ceriodaphnia dubia to Photocatalytic Nano-TiO2 Particles\u003cbr\u003e2. High capacity removal of mercury(II) ions by Poly(hydroxyethyl methacrylate) nanoparticles\u003cbr\u003e3. CO2 response of nanostructured CoSb2O6 synthesized by a non-aqueous co-precipitation method\u003cbr\u003e4. Capture of CO2 by modified multiwalled carbon nanotubes\u003cbr\u003e5. Kinetics, thermodynamics, and regeneration of BTEX adsorption in aqueous solutions via NaOCl oxidized carbon nanotubes\u003cbr\u003e6.Nanostructured Metal Oxide Gas Sensors for Air Quality Monitoring\u003cbr\u003e7.Hydrogen Storage on Carbon Adsorbents: Review\u003cbr\u003e8.Treatment of nanodiamonds in supercritical water\u003cbr\u003e9.Spectrophotometric Flow-Injection System Using Multiwalled Carbon Nanotubes (MWCNT) as Solid Preconcentrator for Copper Monitoring in Water Samples\u003cbr\u003e10. Application of carbon nanotubes as a solid-phase extraction material \u003cbr\u003efor environmental samples\u003cbr\u003e11. Fire retarded environmentally friendly flexible foam materials using nanotechnology\u003cbr\u003e12. Simulation of Hydrogen Purification by Pressure Swing Adsorption for Application in Fuel Cells \u003cbr\u003e13. On the Relationship between Social Ethics and Environmental Nanotechnology\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIndex","published_at":"2017-06-22T21:15:13-04:00","created_at":"2017-06-22T21:15:13-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2010","book","carbon nantubes","environment","fire retardant","nano"],"price":17500,"price_min":17500,"price_max":17500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378470340,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Environanotechnology","public_title":null,"options":["Default Title"],"price":17500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-08-054820-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-054820-3.jpg?v=1499725449"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-054820-3.jpg?v=1499725449","options":["Title"],"media":[{"alt":null,"id":354794766429,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-054820-3.jpg?v=1499725449"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-054820-3.jpg?v=1499725449","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Edited By Maohong Fan, C.P. Huang, Alan E. Bland, Zhonglin Wang, Rachid Slimane \u0026amp; Ian G. Wright \u003cbr\u003eISBN 978-0-08-054820-3 \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003e310 pages\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cb\u003eKey Features: \u003c\/b\u003ePresents research results from a number of countries with various nanotechnologies in multidisciplinary environmental engineering fields\u003cbr\u003eGives a solid introduction to the basic theories needed for understanding how environanotechnologies can be developed cost-effectively, and when they should be applied in a responsible manner\u003cbr\u003eIncludes worked examples that put environmental problems in context to show the actual connections between nanotechnology and environmental engineering\u003cbr\u003e\u003cb\u003eDescription \u003c\/b\u003eUnderstanding and utilizing the interactions between environment and nanoscale materials is a new way to resolve the increasingly challenging environmental issues we are facing and will continue to face. Environanotechnology is the nanoscale technology developed for monitoring the quality of the environment, treating water and wastewater, as well as controlling air pollutants. Therefore, the applications of nanotechnology in environmental engineering have been of great interest to many fields and consequently, a fair amount of research on the use of nanoscale materials for dealing with environmental issues has been conducted.\u003cbr\u003eThe aim of this book is to report on the results recently achieved in different countries. It provides useful technological information for environmental scientists and will assist them in creating cost-effective nanotechnologies to solve critical environmental problems, including those associated with energy production.\u003cbr\u003eLeadership, graduate students, postgraduate students, researchers and chemical engineers\/environmental engineers\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface\u003cbr\u003e1.Responses of Ceriodaphnia dubia to Photocatalytic Nano-TiO2 Particles\u003cbr\u003e2. High capacity removal of mercury(II) ions by Poly(hydroxyethyl methacrylate) nanoparticles\u003cbr\u003e3. CO2 response of nanostructured CoSb2O6 synthesized by a non-aqueous co-precipitation method\u003cbr\u003e4. Capture of CO2 by modified multiwalled carbon nanotubes\u003cbr\u003e5. Kinetics, thermodynamics, and regeneration of BTEX adsorption in aqueous solutions via NaOCl oxidized carbon nanotubes\u003cbr\u003e6.Nanostructured Metal Oxide Gas Sensors for Air Quality Monitoring\u003cbr\u003e7.Hydrogen Storage on Carbon Adsorbents: Review\u003cbr\u003e8.Treatment of nanodiamonds in supercritical water\u003cbr\u003e9.Spectrophotometric Flow-Injection System Using Multiwalled Carbon Nanotubes (MWCNT) as Solid Preconcentrator for Copper Monitoring in Water Samples\u003cbr\u003e10. Application of carbon nanotubes as a solid-phase extraction material \u003cbr\u003efor environmental samples\u003cbr\u003e11. Fire retarded environmentally friendly flexible foam materials using nanotechnology\u003cbr\u003e12. Simulation of Hydrogen Purification by Pressure Swing Adsorption for Application in Fuel Cells \u003cbr\u003e13. On the Relationship between Social Ethics and Environmental Nanotechnology\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIndex"}
Essential Rubber Formu...
$155.00
{"id":11242230724,"title":"Essential Rubber Formulary: Formulas for Practitioners","handle":"978-0-8155-1539-5","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Chellappa Chandrasekaran, Can C Consulting, Chennai, India \u003cbr\u003eISBN 978-0-8155-1539-5 \u003cbr\u003e\u003cbr\u003e202 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe author, a seasoned rubber technologist of four decades, provides more than 180 essential rubber formularies, some of which have never been published, that are used by practitioners the world over on a frequent basis. A special feature of the formulations is that they are designed for factory scale applications.\u003c\/p\u003e\n\u003cp\u003eThe opening chapter of this indispensable book gives practical information on compounding techniques, coloring, ingredients, as well as a whole section on typical rubber testing methods. The book concludes with appendices useful for the technologist that include seven conversion tables and three tables on scorching of rubber, specific gravity and volume cost, equivalent chemical names for trade names.\u003c\/p\u003e\n\u003cp\u003eDesigning a rubber formula on the factory floor demands knowledge of the whole undertaking, such as the physical nature of ingredients, the interaction of additives and the base rubber during compounding and processing, as well as making sure that the finished product conforms to specification and requirements. This book provides all the necessary knowledge for practitioners and students alike.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003ePART-I ABOUT RUBBER \u003c\/b\u003e\u003cbr\u003e1. Introduction \u003cbr\u003e2. Brief notes on compounding ingredients \u003cbr\u003e3. Some hints on rubber compounding techniques \u003cbr\u003e4. Note on Reclaimed rubber \u003cbr\u003e5. Rubber contents in products \u003cbr\u003e6. Note on Coloring of rubbers Bibliography \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePART-II FORMULARY \u003c\/b\u003e\u003cbr\u003e1. Thin Coatings Gray coating Hypalon Black coating Neoprene Black Brushing 1 Black Brushing 2 \u003cbr\u003e2. Oil seals and 'O' Rings Rotary seal Neoprene 85oA 'O' Ring Neoprene 60oA Rotary seal Nitrile 60oA Rotary seal Nitrile 80oA Rotary seal Nitrile 75oA 'O' Ring Nitrile 70oA 'O' Ring Nitrile 1 60oA 'O' Ring Nitrile 2 60oA 'O' Ring SBR 55oA Rotary seal Natural rubber 85oA 'O' Ring Natural rubber pipe coupling 60oA Rotary seal SBR 98oA Rotary seal Nitrile 75oA 'O' Ring nitrile 60oA Rotary Seal Nitrile\/SBR Blend 75oA Rotary Seal Neoprene 85oA Rotary Seal Neoprene 95oA 'O' Ring Neoprene 65oA Butyl Rubber Seal 75oA Bromobutyl Seal 70oA 'O' Ring Thiokol 55oA and 65oA Typical Nitrile Sealing Formulations for Airborne Application Rotary seal Hypalon 65oA and 70oA Rotary seal Nitrile\/PVC Blend 80oA O Ring Nitrile\/PVC Blend 65oA Rotary Seal Viton u Airborne Nitrile Ebonite for Oil Resistance \u003cbr\u003e3. Beltings-Transmission, Conveyor, and V- Belts V-belt inner u Natural Rubber Cord friction compound Latex solution for cord dipping Transmission Belting Conveyor belt cover u Natural rubber Conveyor belt cover u flame proof Conveyor belt cover u SR\/SBR blend Oil resistant raw-edge V-Belt \u003cbr\u003e4. Auto Rubber Components Shock absorber 55oA Shock absorber 65oA Shock absorber 1 60oA Shock absorber 2 60oA Stabilizer bar bush 60oA Stabilizer bar bush 67oA Adhesive bonding agent for fabric insertion sheets Repair cements for automotive Belts Metal bonded Engine moldingsu 45oA Tire flaps 60oA Window channel extrusion Natural rubber Window channel extrusion SBR Neoprene dust cover 58oA Automotive tire tube 45oA Low cost Butyl tube 45oA Car mat Natural rubber 70oA Bicycle tube 50oA \u0026amp; 45oA Wind screen wiper Nitrile rubber gasket moldings Metal bonded engine mounting 55oA Head lamp gasket (non-staining) 55oA General purpose heat resistant gasket (Natural rubber) 60oA Basic formula for oil resistant gasket (Natural rubber) 65oA General purpose rubber bush \u003cbr\u003e5. Retreading rubber compounds and cements Tire tread - Camel back 1 Tire tread - Camel back 2 Tire tread - Camel back 3 Tire tread - Camel back 4 Tire tread - Camel back 5 Tire tread - Camel back 6 Under tread strips Cushion gum compound Vulcanizing solution \u003cbr\u003e6. Industrial Rubber Rollers Cylinder 38 paper mill Cylinder 44 (White) paper mill Cylinder 55 paper mill Cylinder 65 paper mill Cylinder 56 (White) paper mill Cylinder 75 paper mill Cylinder 60 paper mill Cylinder 80 paper mill Cylinder 92 paper mill Cylinder 96 paper mill Cylinder 995 semi-ebonite Cylinder for steel industry (Natural Rubber) 65oA \u0026amp; 55oA Cylinder A for Textile Mill u Green Cylinder E Textiles Cylinder G Textiles Cylinder N55 Neoprene Cylinder N70 Neoprene Cylinder N75 Neoprene Cylinder N90 Neoprene Cylinder P72 Nitrile PN Roll for printing Cylinder O for Textiles Cylinder B (Beige) Textiles Cylinder H (Green Blue) Textiles Cylinder C (Red) Textiles Cylinder E ( Yellow Green) Textiles Cylinder F (Light Brown) Textiles Cylinder G (Light Green) Textiles EPDM roll for 15% HNO3 u Electroplating service Neoprene Printing roll 40oA-45oA Neoprene Hard roll (Non-Black) 85oA Hypalon roll (Black) 85oA Hypalon roll (White) 98oA Rubber roll for Tannery 60oA Rubber roll for Tannery 80oA \u003cbr\u003e7. Tank Lining and Adhesives Rubber lining for Digesters H2SO4 Rubber lining for Drum filters H2SO4 Slurry Rubber lining for Iron Ore Slurry Adhesive solution for abrasion\/wear resistant compound Rubber lining for wet chlorine Adhesive dissolution for ebonite lining Lining phosphoric acid storage tanks-A Natural rubber Lining phosphoric acid storage tanks-B Neoprene rubber Cold bond adhesive Mixture of solvents Chlorine resistant compound Semi-ebonite profiles for Drum filters Formulation for sulphuric acid\/chlorine duty-drying towers Styrene Butadine ebonite for internals Ebonite lining suitable for hot water curing Natural rubber acid resistant strip Neoprene rubber acid and ozone resistant strip EPDM Lining for Nitric acid Bromobutyl lining for Ore beneficiation White Natural rubber lining - Pigmentation plants White Neoprene rubber lining - Pigmentation plants White Natural rubber\/Neoprene blend for Pigmentation plants Chlorobutyl adhesive formulation for butyl lining Adhesive for patch work in rubber lined pipe Butyl lining for acid regeneration duty Flexible cell covers Butyl Membrane u Fisheries tank Low temperature curable bromobutyl Open steam curable natural rubber for phosphoric acid Rubber lining for 20% HCL acid Lining of Impellers for fumes of phosphoric acid Low water absorption neoprene lining Butyl lining for Digesters (without mineral fillers) Lining for Road tankers \u003cbr\u003e8. Grooved Rubber Pad for Railways \u003cbr\u003e9. Paddy dehusking roll Natural Rubber Carboxylated nitrile rubber \u003cbr\u003e10. Footwear rubber components Solid rubber soling Black heel Brown soling High Styrene Nitrile Sponge Natural sponge Rubber strap for sponge soling \u003cbr\u003e11. Hoses Nitrile Hose Outer Nitrile Hose Inner \u003cbr\u003e12. Typical ebonite formulations Typical fast curing ebonite \u003cbr\u003e13. Table Mats u Low cast, Average cost, and Quality \u003cbr\u003e14. Rubber erasers Pencil eraser I Pencil eraser II Ink eraser I Ink eraser II Eraser for Typewriter \u003cbr\u003e15. Natural rubber study formulations u factory trials \u003cbr\u003e16. White Rubber Tiles \u003cbr\u003e17. Factory trials of Neoprene Moldables \u003cbr\u003e18. Proofing compounds for clothing and inflatables \u003cbr\u003e19. Wear-resistant rubber for Mining Industry Typical slurry handling compound Typical Chute and launder lining compound \u003cbr\u003e20. Neoprene Molded Corks \u003cbr\u003e21. Low-cost chemical resistant Neoprene canvas \u003cbr\u003e22. Battery Box \u003cbr\u003e23. Neoprene Washer for water taps \u003cbr\u003e24. Neoprene inner layer for isocyanate bonded compounds \u003cbr\u003e25. Rubber bonded Anvil-Electronics Industry \u003cbr\u003e26. Solid Tires for Fork Lift Trucks \u003cbr\u003e27. Pharmaceutical bottle closures\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:15-04:00","created_at":"2017-06-22T21:14:15-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2007","book","compounding","natural rubber","rubber","rubber components","rubber formulary","rubber testing methods"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378402500,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Essential Rubber Formulary: Formulas for Practitioners","public_title":null,"options":["Default Title"],"price":15500,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-8155-1539-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1539-5.jpg?v=1499727423"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1539-5.jpg?v=1499727423","options":["Title"],"media":[{"alt":null,"id":354794864733,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1539-5.jpg?v=1499727423"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-8155-1539-5.jpg?v=1499727423","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Chellappa Chandrasekaran, Can C Consulting, Chennai, India \u003cbr\u003eISBN 978-0-8155-1539-5 \u003cbr\u003e\u003cbr\u003e202 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe author, a seasoned rubber technologist of four decades, provides more than 180 essential rubber formularies, some of which have never been published, that are used by practitioners the world over on a frequent basis. A special feature of the formulations is that they are designed for factory scale applications.\u003c\/p\u003e\n\u003cp\u003eThe opening chapter of this indispensable book gives practical information on compounding techniques, coloring, ingredients, as well as a whole section on typical rubber testing methods. The book concludes with appendices useful for the technologist that include seven conversion tables and three tables on scorching of rubber, specific gravity and volume cost, equivalent chemical names for trade names.\u003c\/p\u003e\n\u003cp\u003eDesigning a rubber formula on the factory floor demands knowledge of the whole undertaking, such as the physical nature of ingredients, the interaction of additives and the base rubber during compounding and processing, as well as making sure that the finished product conforms to specification and requirements. This book provides all the necessary knowledge for practitioners and students alike.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cb\u003ePART-I ABOUT RUBBER \u003c\/b\u003e\u003cbr\u003e1. Introduction \u003cbr\u003e2. Brief notes on compounding ingredients \u003cbr\u003e3. Some hints on rubber compounding techniques \u003cbr\u003e4. Note on Reclaimed rubber \u003cbr\u003e5. Rubber contents in products \u003cbr\u003e6. Note on Coloring of rubbers Bibliography \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePART-II FORMULARY \u003c\/b\u003e\u003cbr\u003e1. Thin Coatings Gray coating Hypalon Black coating Neoprene Black Brushing 1 Black Brushing 2 \u003cbr\u003e2. Oil seals and 'O' Rings Rotary seal Neoprene 85oA 'O' Ring Neoprene 60oA Rotary seal Nitrile 60oA Rotary seal Nitrile 80oA Rotary seal Nitrile 75oA 'O' Ring Nitrile 70oA 'O' Ring Nitrile 1 60oA 'O' Ring Nitrile 2 60oA 'O' Ring SBR 55oA Rotary seal Natural rubber 85oA 'O' Ring Natural rubber pipe coupling 60oA Rotary seal SBR 98oA Rotary seal Nitrile 75oA 'O' Ring nitrile 60oA Rotary Seal Nitrile\/SBR Blend 75oA Rotary Seal Neoprene 85oA Rotary Seal Neoprene 95oA 'O' Ring Neoprene 65oA Butyl Rubber Seal 75oA Bromobutyl Seal 70oA 'O' Ring Thiokol 55oA and 65oA Typical Nitrile Sealing Formulations for Airborne Application Rotary seal Hypalon 65oA and 70oA Rotary seal Nitrile\/PVC Blend 80oA O Ring Nitrile\/PVC Blend 65oA Rotary Seal Viton u Airborne Nitrile Ebonite for Oil Resistance \u003cbr\u003e3. Beltings-Transmission, Conveyor, and V- Belts V-belt inner u Natural Rubber Cord friction compound Latex solution for cord dipping Transmission Belting Conveyor belt cover u Natural rubber Conveyor belt cover u flame proof Conveyor belt cover u SR\/SBR blend Oil resistant raw-edge V-Belt \u003cbr\u003e4. Auto Rubber Components Shock absorber 55oA Shock absorber 65oA Shock absorber 1 60oA Shock absorber 2 60oA Stabilizer bar bush 60oA Stabilizer bar bush 67oA Adhesive bonding agent for fabric insertion sheets Repair cements for automotive Belts Metal bonded Engine moldingsu 45oA Tire flaps 60oA Window channel extrusion Natural rubber Window channel extrusion SBR Neoprene dust cover 58oA Automotive tire tube 45oA Low cost Butyl tube 45oA Car mat Natural rubber 70oA Bicycle tube 50oA \u0026amp; 45oA Wind screen wiper Nitrile rubber gasket moldings Metal bonded engine mounting 55oA Head lamp gasket (non-staining) 55oA General purpose heat resistant gasket (Natural rubber) 60oA Basic formula for oil resistant gasket (Natural rubber) 65oA General purpose rubber bush \u003cbr\u003e5. Retreading rubber compounds and cements Tire tread - Camel back 1 Tire tread - Camel back 2 Tire tread - Camel back 3 Tire tread - Camel back 4 Tire tread - Camel back 5 Tire tread - Camel back 6 Under tread strips Cushion gum compound Vulcanizing solution \u003cbr\u003e6. Industrial Rubber Rollers Cylinder 38 paper mill Cylinder 44 (White) paper mill Cylinder 55 paper mill Cylinder 65 paper mill Cylinder 56 (White) paper mill Cylinder 75 paper mill Cylinder 60 paper mill Cylinder 80 paper mill Cylinder 92 paper mill Cylinder 96 paper mill Cylinder 995 semi-ebonite Cylinder for steel industry (Natural Rubber) 65oA \u0026amp; 55oA Cylinder A for Textile Mill u Green Cylinder E Textiles Cylinder G Textiles Cylinder N55 Neoprene Cylinder N70 Neoprene Cylinder N75 Neoprene Cylinder N90 Neoprene Cylinder P72 Nitrile PN Roll for printing Cylinder O for Textiles Cylinder B (Beige) Textiles Cylinder H (Green Blue) Textiles Cylinder C (Red) Textiles Cylinder E ( Yellow Green) Textiles Cylinder F (Light Brown) Textiles Cylinder G (Light Green) Textiles EPDM roll for 15% HNO3 u Electroplating service Neoprene Printing roll 40oA-45oA Neoprene Hard roll (Non-Black) 85oA Hypalon roll (Black) 85oA Hypalon roll (White) 98oA Rubber roll for Tannery 60oA Rubber roll for Tannery 80oA \u003cbr\u003e7. Tank Lining and Adhesives Rubber lining for Digesters H2SO4 Rubber lining for Drum filters H2SO4 Slurry Rubber lining for Iron Ore Slurry Adhesive solution for abrasion\/wear resistant compound Rubber lining for wet chlorine Adhesive dissolution for ebonite lining Lining phosphoric acid storage tanks-A Natural rubber Lining phosphoric acid storage tanks-B Neoprene rubber Cold bond adhesive Mixture of solvents Chlorine resistant compound Semi-ebonite profiles for Drum filters Formulation for sulphuric acid\/chlorine duty-drying towers Styrene Butadine ebonite for internals Ebonite lining suitable for hot water curing Natural rubber acid resistant strip Neoprene rubber acid and ozone resistant strip EPDM Lining for Nitric acid Bromobutyl lining for Ore beneficiation White Natural rubber lining - Pigmentation plants White Neoprene rubber lining - Pigmentation plants White Natural rubber\/Neoprene blend for Pigmentation plants Chlorobutyl adhesive formulation for butyl lining Adhesive for patch work in rubber lined pipe Butyl lining for acid regeneration duty Flexible cell covers Butyl Membrane u Fisheries tank Low temperature curable bromobutyl Open steam curable natural rubber for phosphoric acid Rubber lining for 20% HCL acid Lining of Impellers for fumes of phosphoric acid Low water absorption neoprene lining Butyl lining for Digesters (without mineral fillers) Lining for Road tankers \u003cbr\u003e8. Grooved Rubber Pad for Railways \u003cbr\u003e9. Paddy dehusking roll Natural Rubber Carboxylated nitrile rubber \u003cbr\u003e10. Footwear rubber components Solid rubber soling Black heel Brown soling High Styrene Nitrile Sponge Natural sponge Rubber strap for sponge soling \u003cbr\u003e11. Hoses Nitrile Hose Outer Nitrile Hose Inner \u003cbr\u003e12. Typical ebonite formulations Typical fast curing ebonite \u003cbr\u003e13. Table Mats u Low cast, Average cost, and Quality \u003cbr\u003e14. Rubber erasers Pencil eraser I Pencil eraser II Ink eraser I Ink eraser II Eraser for Typewriter \u003cbr\u003e15. Natural rubber study formulations u factory trials \u003cbr\u003e16. White Rubber Tiles \u003cbr\u003e17. Factory trials of Neoprene Moldables \u003cbr\u003e18. Proofing compounds for clothing and inflatables \u003cbr\u003e19. Wear-resistant rubber for Mining Industry Typical slurry handling compound Typical Chute and launder lining compound \u003cbr\u003e20. Neoprene Molded Corks \u003cbr\u003e21. Low-cost chemical resistant Neoprene canvas \u003cbr\u003e22. Battery Box \u003cbr\u003e23. Neoprene Washer for water taps \u003cbr\u003e24. Neoprene inner layer for isocyanate bonded compounds \u003cbr\u003e25. Rubber bonded Anvil-Electronics Industry \u003cbr\u003e26. Solid Tires for Fork Lift Trucks \u003cbr\u003e27. Pharmaceutical bottle closures\u003cbr\u003e\u003cbr\u003e"}
European Coatings Hand...
$300.00
{"id":11242246532,"title":"European Coatings Handbook, 2nd Edition","handle":"978-3-86630-849-7","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Peter Mischke, Michael Groteklaes, and Thomas Brock \u003cbr\u003eISBN 978-3-86630-849-7 \u003cbr\u003e\u003cbr\u003e400 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThis work is intended to fill a gap in the current specialist literature: as an accompanying handbook. An extremely broad knowledge base is a prerequisite for mastering this unique protective and finishing material. However, today’s coatings specialist also requires knowledge of process engineering in use of production and application equipment. This includes an understanding of materials science in the substrate materials and more generally the quality of the paint and its coatings. This also includes a familiarity with the environmental and safety aspects of coatings for paints.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese features are underpinned by a constant awareness of emerging developments in the coatings sector, which remains as dynamic as ever. The book covers the principles of raw materials, manufacture, application, and testing of coatings. But its principal aim is to clearly illustrate and create connections throughout the coatings field. It will provide a student with a solid basis for a closer study of coating technology and will also easily explain it to those that do not have a background in this subject area.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nIntroduction; Raw materials for coatings; Coating systems, formulation, film-forming; Manufacture of paints and coatings; Substrates and pretreatment; Application and drying; Painting and coating processes; Test methods and measuring techniques; Environmental protection and safety at work","published_at":"2017-06-22T21:15:03-04:00","created_at":"2017-06-22T21:15:03-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2010","application","book","coating","formulation","p-applications","paints","polymer","testing"],"price":30000,"price_min":30000,"price_max":30000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378457668,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"European Coatings Handbook, 2nd Edition","public_title":null,"options":["Default Title"],"price":30000,"weight":0,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-3-86630-849-7","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-3-86630-849-7.jpg?v=1499988141"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-3-86630-849-7.jpg?v=1499988141","options":["Title"],"media":[{"alt":null,"id":354794897501,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-3-86630-849-7.jpg?v=1499988141"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-3-86630-849-7.jpg?v=1499988141","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Peter Mischke, Michael Groteklaes, and Thomas Brock \u003cbr\u003eISBN 978-3-86630-849-7 \u003cbr\u003e\u003cbr\u003e400 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThis work is intended to fill a gap in the current specialist literature: as an accompanying handbook. An extremely broad knowledge base is a prerequisite for mastering this unique protective and finishing material. However, today’s coatings specialist also requires knowledge of process engineering in use of production and application equipment. This includes an understanding of materials science in the substrate materials and more generally the quality of the paint and its coatings. This also includes a familiarity with the environmental and safety aspects of coatings for paints.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese features are underpinned by a constant awareness of emerging developments in the coatings sector, which remains as dynamic as ever. The book covers the principles of raw materials, manufacture, application, and testing of coatings. But its principal aim is to clearly illustrate and create connections throughout the coatings field. It will provide a student with a solid basis for a closer study of coating technology and will also easily explain it to those that do not have a background in this subject area.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nIntroduction; Raw materials for coatings; Coating systems, formulation, film-forming; Manufacture of paints and coatings; Substrates and pretreatment; Application and drying; Painting and coating processes; Test methods and measuring techniques; Environmental protection and safety at work"}
Failure of Plastics an...
$270.00
{"id":11242218372,"title":"Failure of Plastics and Rubber Products. Causes, Effects and Case Studies Involving Degradation","handle":"978-1-85957-517-8","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: D.C. Wright \u003cbr\u003eISBN 978-1-85957-517-8 \u003cbr\u003e\u003cbr\u003ePages: 412, Figures: 139, Tables: 52\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPlastics and rubbers together make up the most adaptable and varied class of materials available to product designers. They may be transparent or opaque, rigid or flexible, lightweight, insulating, and weatherproof. They are used in almost every industry, and in every part of the home. Applications range from the humble hot water bottle to the sheathing on a high voltage cable, and from a simple scrubbing brush to a tank for storing hydrochloric acid. Products may be disposable (e.g. packaging goods) or intended to last for decades, such as a buried sewage pipe. However, it is this very diversity which makes materials selection so difficult, and appropriate design so important. Indeed the one thing that all these particular products have in common is their presence in this book of failures! \u003cbr\u003eFailures due to degradation may result from exposure to the weather or an aggressive operating environment. Alternatively, they may be caused by the introduction of an external agent unforeseen by the product designer. They may be rapid or very slow, and they may result from a combination of factors. In this book Dr. Wright describes the following mechanisms of polymer degradation, and then illustrates each failure mechanism with a number of case studies: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThermo-oxidation,\u003c\/li\u003e\n\u003cli\u003ePhoto-oxidation,\u003c\/li\u003e\n\u003cli\u003eDegradation due to ionizing radiation,\u003c\/li\u003e\n\u003cli\u003eChemical attack,\u003c\/li\u003e\n\u003cli\u003eEnvironmental stress cracking,\u003c\/li\u003e\n\u003cli\u003eOther miscellaneous effects, including treeing, electrochemical degradation and biodegradation.\u003c\/li\u003e\n\u003c\/ul\u003e\nMany of the case studies are based on Dr. Wright's own experiences whilst working at Rapra. In each case, he describes the circumstances of the failure and discusses both the consequences of the failure and\u003cbr\u003ethe lessons that may be learned from it. Most of the failed products are familiar to us all, and his style is both readable and informative. Colored photographs are included where available. \u003cbr\u003eThe book will be essential reading for designers, engineers, product specifiers and forensic engineers. Materials suppliers and processors will also benefit from the pragmatic analysis and advice it contains. It will also be of value to all students of polymer science and technology, providing an essential insight into the practical application of plastics and rubbers and the potential problems. Finally, it will be of interest to a much broader readership, including anyone who ever wondered why things break, and it should become a standard reference work in all technical libraries. \u003cbr\u003eThis book was written with the support of the UK Department of Trade and Industry. It is intended to raise awareness of the causes and consequences of polymer product failures, in order to reduce the future\u003cbr\u003eincidences of such failures, and their considerable costs to industry\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e1 Failure Analysis - A Personal Perspective\u003c\/strong\u003e \u003cbr\u003e1.1 Introduction \u003cbr\u003e1.2 Identification of strategic weaknesses \u003cbr\u003e1.3 Identification of human and material weaknesses \u003cbr\u003e1.4 Identification of product testing weaknesses \u003cbr\u003e1.5 Priorities for future consideration\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e2 Thermo-oxidation\u003c\/b\u003e \u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 The influence of polymer chemistry \u003cbr\u003e2.3 The efficacy of stabilising additives \u003cbr\u003e2.4 Metal catalysis \u003cbr\u003e2.5 The influence of stress \u003cbr\u003e2.6 The oxidising medium \u003cbr\u003e2.7 Oxidation and stabilisation of polyvinyl chloride \u003cbr\u003e2.8 Case studies\u003c\/p\u003e\n\u003cli\u003e2.8.1 Low density polyethylene insulation covers\u003c\/li\u003e\n\u003cli\u003e2.8.2 Rubber expansion joints\u003c\/li\u003e\n\u003cli\u003e2.8.3 Vehicle tyres\u003c\/li\u003e\n\u003cli\u003e2.8.4 Flexible hose (example 1)\u003c\/li\u003e\n\u003cli\u003e2.8.5 Flexible connectors\u003c\/li\u003e\n\u003cli\u003e2.8.6 Lift pump diaphragms\u003c\/li\u003e\n\u003cli\u003e2.8.7 Hot water bottle\u003c\/li\u003e\n\u003cli\u003e2.8.8 Flexible hose (example 2)\u003c\/li\u003e\n\u003cli\u003e2.8.9 Polypropylene laminated steel sheet\u003c\/li\u003e\n\u003cli\u003e2.8.10 Acrylic bulkhead light covers\n\u003cp\u003e\u003cb\u003e3 Photo-oxidation\u003c\/b\u003e \u003cbr\u003e3.1 Introduction \u003cbr\u003e3.2 The severity of exposure \u003cbr\u003e3.3 The influence of polymer chemistry \u003cbr\u003e3.4 Stabilisation \u003cbr\u003e3.5 Material and application examples \u003cbr\u003e3.6 Case studies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.6.1 Polyethylene irrigation pipe\u003c\/li\u003e\n\u003cli\u003e3.6.2 Polyvinyl chloride power line insulation\u003c\/li\u003e\n\u003cli\u003e3.6.3 Colour instability of pigmented polymers\u003c\/li\u003e\n\u003cli\u003e3.6.4 Low density polyethylene tube\u003c\/li\u003e\n\u003cli\u003e3.6.5 Acrylonitrile-butadiene-styrene pipework\u003c\/li\u003e\n\u003cli\u003e3.6.6 Crosslinked polyethylene (XLPE) pole terminated waveconal cable\u003c\/li\u003e\n\u003cli\u003e3.6.7 High impact polystyrene jug handle\u003c\/li\u003e\n\u003cli\u003e3.6.8 Artificial ski slope filaments\u003c\/li\u003e\n\u003cli\u003e3.6.9 Polyvinyl chloride shrouds\u003c\/li\u003e\n\u003cli\u003e3.6.10 Polypropylene starter units\u003c\/li\u003e\n\u003cli\u003e3.6.11 Polyvinyl chloride running rails\n\u003cp\u003e\u003cb\u003e4 Degradation Due to Ionising Radiation\u003c\/b\u003e \u003cbr\u003e4.1 Introduction \u003cbr\u003e4.2 Degradation mechanisms \u003cbr\u003e4.3 Radiation resistance of polymers \u003cbr\u003e4.4 Performance of specific materials \u003cbr\u003e4.5 Failure examples\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e5 Chemical Attack\u003c\/b\u003e \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Solvation effects \u003cbr\u003e5.3 Oxidation \u003cbr\u003e5.4 Acid induced stress corrosion cracking \u003cbr\u003e5.5 Hydrolysis \u003cbr\u003e5.6 Case studies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5.6.1 Polyvinylidene fluoride in dry chlorine\u003c\/li\u003e\n\u003cli\u003e5.6.2 Acrylonitrile-butadiene-styrene in hydrochloric acid\u003c\/li\u003e\n\u003cli\u003e5.6.3 Acetal in chlorinated water\u003c\/li\u003e\n\u003cli\u003e5.6.4 Stress corrosion cracking of acetal (1)\u003c\/li\u003e\n\u003cli\u003e5.6.5 Stress corrosion cracking of acetal (2)\u003c\/li\u003e\n\u003cli\u003e5.6.6 Thermoplastic elastomers in hot water\u003c\/li\u003e\n\u003cli\u003e5.6.7 Solvent attack: cables in ducts and contaminated soil\u003c\/li\u003e\n\u003cli\u003e5.6.8 Glass-reinforced plastic in sulphuric acid\u003c\/li\u003e\n\u003cli\u003e5.6.9 Corrosion cracking of composite insulators\u003c\/li\u003e\n\u003cli\u003e5.6.10 Acetal pipe fittings\u003c\/li\u003e\n\u003cli\u003e5.6.11 Polyurethane oil seals\u003c\/li\u003e\n\u003cli\u003e5.6.12 Degraded polycarbonate mouldings\u003c\/li\u003e\n\u003cli\u003e5.6.13 Glass-reinforced plastic in hydrochloric acid\u003c\/li\u003e\n\u003cli\u003e5.6.14 Polyvinyl chloride lined rinsing tank\n\u003cp\u003e\u003cb\u003e6 Environmental Stress Cracking\u003c\/b\u003e \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 Crazing and cracking in air \u003cbr\u003e6.3 Crazing and cracking in active fluids \u003cbr\u003e6.4 Performance of specific materials \u003cbr\u003e6.5 Case studies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e6.5.1 Noryl fire extinguisher head\u003c\/li\u003e\n\u003cli\u003e6.5.2 High density polyethylene screw caps\u003c\/li\u003e\n\u003cli\u003e6.5.3 Crazing of an acrylic sight glass\u003c\/li\u003e\n\u003cli\u003e6.5.4 Polycarbonate instrument housing\u003c\/li\u003e\n\u003cli\u003e6.5.5 Nylon 6 fire hose valve\u003c\/li\u003e\n\u003cli\u003e6.5.6 Polyethylene agrochemical container\u003c\/li\u003e\n\u003cli\u003e6.5.7 Noryl electrical plugs\u003c\/li\u003e\n\u003cli\u003e6.5.8 Acrylonitrile-butadiene-styrene pipe fittings\u003c\/li\u003e\n\u003cli\u003e6.5.9 Motorised wheelchairs\u003c\/li\u003e\n\u003cli\u003e6.5.10 Pin hinged polystyrene mouldings\u003c\/li\u003e\n\u003cli\u003e6.5.11 Polyethylene wire insulation\u003c\/li\u003e\n\u003cli\u003e6.5.12 Polystyrene scrubbing brushes\u003c\/li\u003e\n\u003cli\u003e6.5.13 Blow moulded polyvinyl chloride bottles\u003c\/li\u003e\n\u003cli\u003e6.5.14 Polyvinyl chloride pressure pipe\u003c\/li\u003e\n\u003cli\u003e6.5.15 Fracture of an acrylic sight glass\u003c\/li\u003e\n\u003cli\u003e6.5.16 Rotationally moulded polyethylene wine coolers\u003c\/li\u003e\n\u003cli\u003e6.5.17 Polycarbonate mixing bowls and jugs\u003c\/li\u003e\n\u003cli\u003e6.5.18 Acrylonitrile-butadiene-styrene rotary switches\u003c\/li\u003e\n\u003cli\u003e6.5.19 Vacuum moulded sweets dispenser\u003c\/li\u003e\n\u003cli\u003e6.5.20 Acrylonitrile-butadiene-styrene pipe\u003c\/li\u003e\n\u003cli\u003e6.5.21 Polycarbonate filter bowls\u003c\/li\u003e\n\u003cli\u003e6.5.22 Noryl rotary switches\n\u003cp\u003e\u003cb\u003e7 Other Miscellaneous Effects\u003c\/b\u003e \u003cbr\u003e7.1 Electrical treeing and water treeing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e7.1.1 Introduction\u003c\/li\u003e\n\u003cli\u003e7.1.2 Minimising the risk of failure \u003cbr\u003e7.2 Electrochemical degradation \u003cbr\u003e7.3 Biodegradation\u003c\/li\u003e\n\u003cli\u003e7.3.1 Body fluids\u003c\/li\u003e\n\u003cli\u003e7.3.2 Micro-organisms \u003cbr\u003e7.4 Diffusion, permeation, and migration \u003cbr\u003e7.5 Physical ageing \u003cbr\u003e7.6 Case studies\u003c\/li\u003e\n\u003cli\u003e7.6.1 Water treeing failure of crosslinked polyethylene power cable insulation\u003c\/li\u003e\n\u003cli\u003e7.6.2 Loss of polyvinyl chloride plasticiser\u003c\/li\u003e\n\u003cli\u003e7.6.3 Marring in contact with polyvinyl chloride covered wiring\u003c\/li\u003e\n\u003cli\u003e7.6.4 Shrinkage of ethylene-propylene-diene hose\u003c\/li\u003e\n\u003cli\u003e7.6.5 Diffusion of chlorine through polyvinylidene fluoride\u003c\/li\u003e\n\u003cli\u003e7.6.6 Cracking of a Nylon 6 outsert moulding\u003c\/li\u003e\n\u003cli\u003e7.6.7 Nylon 66 drive coupling\u003c\/li\u003e\n\u003cli\u003e7.6.8 Blistering of a glass-reinforced plastic laminate\u003c\/li\u003e\n\u003cli\u003e7.6.9 Polysulphone filter bowl\u003c\/li\u003e\n\u003cli\u003e7.6.10 Polyvinyl chloride skylights\u003c\/li\u003e\n\u003cli\u003e7.6.11 Polypropylene scooter wheels\u003c\/li\u003e\n\u003cli\u003e7.6.12 Epoxy flooring\u003c\/li\u003e\n\u003cli\u003e7.6.13 Valve sleeves\n\u003cp\u003eAbbreviations and Acronyms \u003cbr\u003eIndex\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDuring his 30 years with Rapra, until his recent retirement, Dr. Wright specialized in the failure of plastics materials and products, researching into critical issues of materials durability, such as creep, fatigue and environmental stress cracking. He published around 90 technical papers and 3 books and was involved in the diagnosis of some 5,000 product failures, making him a leading expert in this field.","published_at":"2017-06-22T21:13:36-04:00","created_at":"2017-06-22T21:13:36-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2001","acrylonitrile-butadiene-styrene","biodegradation","book","chemical attack","color","colour","cracking","crazing","crosslinked polyethylene","degradation","environmental stress cracking","filaments","high impact","insulation","ionising radiation","ionizing radiation","p-properties","photo-oxidation","physical ageing","pigment","pipe","polyethylene","polymer","polypropylene","polyvinyl chloride","radation","rails","rubbers","shrouds","thermo-oxidation","tube","XLPE"],"price":27000,"price_min":27000,"price_max":27000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378362116,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Failure of Plastics and Rubber Products. Causes, Effects and Case Studies Involving Degradation","public_title":null,"options":["Default Title"],"price":27000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-517-8","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-517-8.jpg?v=1499988183"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-517-8.jpg?v=1499988183","options":["Title"],"media":[{"alt":null,"id":354795159645,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-517-8.jpg?v=1499988183"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-517-8.jpg?v=1499988183","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: D.C. Wright \u003cbr\u003eISBN 978-1-85957-517-8 \u003cbr\u003e\u003cbr\u003ePages: 412, Figures: 139, Tables: 52\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPlastics and rubbers together make up the most adaptable and varied class of materials available to product designers. They may be transparent or opaque, rigid or flexible, lightweight, insulating, and weatherproof. They are used in almost every industry, and in every part of the home. Applications range from the humble hot water bottle to the sheathing on a high voltage cable, and from a simple scrubbing brush to a tank for storing hydrochloric acid. Products may be disposable (e.g. packaging goods) or intended to last for decades, such as a buried sewage pipe. However, it is this very diversity which makes materials selection so difficult, and appropriate design so important. Indeed the one thing that all these particular products have in common is their presence in this book of failures! \u003cbr\u003eFailures due to degradation may result from exposure to the weather or an aggressive operating environment. Alternatively, they may be caused by the introduction of an external agent unforeseen by the product designer. They may be rapid or very slow, and they may result from a combination of factors. In this book Dr. Wright describes the following mechanisms of polymer degradation, and then illustrates each failure mechanism with a number of case studies: \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThermo-oxidation,\u003c\/li\u003e\n\u003cli\u003ePhoto-oxidation,\u003c\/li\u003e\n\u003cli\u003eDegradation due to ionizing radiation,\u003c\/li\u003e\n\u003cli\u003eChemical attack,\u003c\/li\u003e\n\u003cli\u003eEnvironmental stress cracking,\u003c\/li\u003e\n\u003cli\u003eOther miscellaneous effects, including treeing, electrochemical degradation and biodegradation.\u003c\/li\u003e\n\u003c\/ul\u003e\nMany of the case studies are based on Dr. Wright's own experiences whilst working at Rapra. In each case, he describes the circumstances of the failure and discusses both the consequences of the failure and\u003cbr\u003ethe lessons that may be learned from it. Most of the failed products are familiar to us all, and his style is both readable and informative. Colored photographs are included where available. \u003cbr\u003eThe book will be essential reading for designers, engineers, product specifiers and forensic engineers. Materials suppliers and processors will also benefit from the pragmatic analysis and advice it contains. It will also be of value to all students of polymer science and technology, providing an essential insight into the practical application of plastics and rubbers and the potential problems. Finally, it will be of interest to a much broader readership, including anyone who ever wondered why things break, and it should become a standard reference work in all technical libraries. \u003cbr\u003eThis book was written with the support of the UK Department of Trade and Industry. It is intended to raise awareness of the causes and consequences of polymer product failures, in order to reduce the future\u003cbr\u003eincidences of such failures, and their considerable costs to industry\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e1 Failure Analysis - A Personal Perspective\u003c\/strong\u003e \u003cbr\u003e1.1 Introduction \u003cbr\u003e1.2 Identification of strategic weaknesses \u003cbr\u003e1.3 Identification of human and material weaknesses \u003cbr\u003e1.4 Identification of product testing weaknesses \u003cbr\u003e1.5 Priorities for future consideration\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e2 Thermo-oxidation\u003c\/b\u003e \u003cbr\u003e2.1 Introduction \u003cbr\u003e2.2 The influence of polymer chemistry \u003cbr\u003e2.3 The efficacy of stabilising additives \u003cbr\u003e2.4 Metal catalysis \u003cbr\u003e2.5 The influence of stress \u003cbr\u003e2.6 The oxidising medium \u003cbr\u003e2.7 Oxidation and stabilisation of polyvinyl chloride \u003cbr\u003e2.8 Case studies\u003c\/p\u003e\n\u003cli\u003e2.8.1 Low density polyethylene insulation covers\u003c\/li\u003e\n\u003cli\u003e2.8.2 Rubber expansion joints\u003c\/li\u003e\n\u003cli\u003e2.8.3 Vehicle tyres\u003c\/li\u003e\n\u003cli\u003e2.8.4 Flexible hose (example 1)\u003c\/li\u003e\n\u003cli\u003e2.8.5 Flexible connectors\u003c\/li\u003e\n\u003cli\u003e2.8.6 Lift pump diaphragms\u003c\/li\u003e\n\u003cli\u003e2.8.7 Hot water bottle\u003c\/li\u003e\n\u003cli\u003e2.8.8 Flexible hose (example 2)\u003c\/li\u003e\n\u003cli\u003e2.8.9 Polypropylene laminated steel sheet\u003c\/li\u003e\n\u003cli\u003e2.8.10 Acrylic bulkhead light covers\n\u003cp\u003e\u003cb\u003e3 Photo-oxidation\u003c\/b\u003e \u003cbr\u003e3.1 Introduction \u003cbr\u003e3.2 The severity of exposure \u003cbr\u003e3.3 The influence of polymer chemistry \u003cbr\u003e3.4 Stabilisation \u003cbr\u003e3.5 Material and application examples \u003cbr\u003e3.6 Case studies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.6.1 Polyethylene irrigation pipe\u003c\/li\u003e\n\u003cli\u003e3.6.2 Polyvinyl chloride power line insulation\u003c\/li\u003e\n\u003cli\u003e3.6.3 Colour instability of pigmented polymers\u003c\/li\u003e\n\u003cli\u003e3.6.4 Low density polyethylene tube\u003c\/li\u003e\n\u003cli\u003e3.6.5 Acrylonitrile-butadiene-styrene pipework\u003c\/li\u003e\n\u003cli\u003e3.6.6 Crosslinked polyethylene (XLPE) pole terminated waveconal cable\u003c\/li\u003e\n\u003cli\u003e3.6.7 High impact polystyrene jug handle\u003c\/li\u003e\n\u003cli\u003e3.6.8 Artificial ski slope filaments\u003c\/li\u003e\n\u003cli\u003e3.6.9 Polyvinyl chloride shrouds\u003c\/li\u003e\n\u003cli\u003e3.6.10 Polypropylene starter units\u003c\/li\u003e\n\u003cli\u003e3.6.11 Polyvinyl chloride running rails\n\u003cp\u003e\u003cb\u003e4 Degradation Due to Ionising Radiation\u003c\/b\u003e \u003cbr\u003e4.1 Introduction \u003cbr\u003e4.2 Degradation mechanisms \u003cbr\u003e4.3 Radiation resistance of polymers \u003cbr\u003e4.4 Performance of specific materials \u003cbr\u003e4.5 Failure examples\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e5 Chemical Attack\u003c\/b\u003e \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Solvation effects \u003cbr\u003e5.3 Oxidation \u003cbr\u003e5.4 Acid induced stress corrosion cracking \u003cbr\u003e5.5 Hydrolysis \u003cbr\u003e5.6 Case studies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5.6.1 Polyvinylidene fluoride in dry chlorine\u003c\/li\u003e\n\u003cli\u003e5.6.2 Acrylonitrile-butadiene-styrene in hydrochloric acid\u003c\/li\u003e\n\u003cli\u003e5.6.3 Acetal in chlorinated water\u003c\/li\u003e\n\u003cli\u003e5.6.4 Stress corrosion cracking of acetal (1)\u003c\/li\u003e\n\u003cli\u003e5.6.5 Stress corrosion cracking of acetal (2)\u003c\/li\u003e\n\u003cli\u003e5.6.6 Thermoplastic elastomers in hot water\u003c\/li\u003e\n\u003cli\u003e5.6.7 Solvent attack: cables in ducts and contaminated soil\u003c\/li\u003e\n\u003cli\u003e5.6.8 Glass-reinforced plastic in sulphuric acid\u003c\/li\u003e\n\u003cli\u003e5.6.9 Corrosion cracking of composite insulators\u003c\/li\u003e\n\u003cli\u003e5.6.10 Acetal pipe fittings\u003c\/li\u003e\n\u003cli\u003e5.6.11 Polyurethane oil seals\u003c\/li\u003e\n\u003cli\u003e5.6.12 Degraded polycarbonate mouldings\u003c\/li\u003e\n\u003cli\u003e5.6.13 Glass-reinforced plastic in hydrochloric acid\u003c\/li\u003e\n\u003cli\u003e5.6.14 Polyvinyl chloride lined rinsing tank\n\u003cp\u003e\u003cb\u003e6 Environmental Stress Cracking\u003c\/b\u003e \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 Crazing and cracking in air \u003cbr\u003e6.3 Crazing and cracking in active fluids \u003cbr\u003e6.4 Performance of specific materials \u003cbr\u003e6.5 Case studies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e6.5.1 Noryl fire extinguisher head\u003c\/li\u003e\n\u003cli\u003e6.5.2 High density polyethylene screw caps\u003c\/li\u003e\n\u003cli\u003e6.5.3 Crazing of an acrylic sight glass\u003c\/li\u003e\n\u003cli\u003e6.5.4 Polycarbonate instrument housing\u003c\/li\u003e\n\u003cli\u003e6.5.5 Nylon 6 fire hose valve\u003c\/li\u003e\n\u003cli\u003e6.5.6 Polyethylene agrochemical container\u003c\/li\u003e\n\u003cli\u003e6.5.7 Noryl electrical plugs\u003c\/li\u003e\n\u003cli\u003e6.5.8 Acrylonitrile-butadiene-styrene pipe fittings\u003c\/li\u003e\n\u003cli\u003e6.5.9 Motorised wheelchairs\u003c\/li\u003e\n\u003cli\u003e6.5.10 Pin hinged polystyrene mouldings\u003c\/li\u003e\n\u003cli\u003e6.5.11 Polyethylene wire insulation\u003c\/li\u003e\n\u003cli\u003e6.5.12 Polystyrene scrubbing brushes\u003c\/li\u003e\n\u003cli\u003e6.5.13 Blow moulded polyvinyl chloride bottles\u003c\/li\u003e\n\u003cli\u003e6.5.14 Polyvinyl chloride pressure pipe\u003c\/li\u003e\n\u003cli\u003e6.5.15 Fracture of an acrylic sight glass\u003c\/li\u003e\n\u003cli\u003e6.5.16 Rotationally moulded polyethylene wine coolers\u003c\/li\u003e\n\u003cli\u003e6.5.17 Polycarbonate mixing bowls and jugs\u003c\/li\u003e\n\u003cli\u003e6.5.18 Acrylonitrile-butadiene-styrene rotary switches\u003c\/li\u003e\n\u003cli\u003e6.5.19 Vacuum moulded sweets dispenser\u003c\/li\u003e\n\u003cli\u003e6.5.20 Acrylonitrile-butadiene-styrene pipe\u003c\/li\u003e\n\u003cli\u003e6.5.21 Polycarbonate filter bowls\u003c\/li\u003e\n\u003cli\u003e6.5.22 Noryl rotary switches\n\u003cp\u003e\u003cb\u003e7 Other Miscellaneous Effects\u003c\/b\u003e \u003cbr\u003e7.1 Electrical treeing and water treeing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e7.1.1 Introduction\u003c\/li\u003e\n\u003cli\u003e7.1.2 Minimising the risk of failure \u003cbr\u003e7.2 Electrochemical degradation \u003cbr\u003e7.3 Biodegradation\u003c\/li\u003e\n\u003cli\u003e7.3.1 Body fluids\u003c\/li\u003e\n\u003cli\u003e7.3.2 Micro-organisms \u003cbr\u003e7.4 Diffusion, permeation, and migration \u003cbr\u003e7.5 Physical ageing \u003cbr\u003e7.6 Case studies\u003c\/li\u003e\n\u003cli\u003e7.6.1 Water treeing failure of crosslinked polyethylene power cable insulation\u003c\/li\u003e\n\u003cli\u003e7.6.2 Loss of polyvinyl chloride plasticiser\u003c\/li\u003e\n\u003cli\u003e7.6.3 Marring in contact with polyvinyl chloride covered wiring\u003c\/li\u003e\n\u003cli\u003e7.6.4 Shrinkage of ethylene-propylene-diene hose\u003c\/li\u003e\n\u003cli\u003e7.6.5 Diffusion of chlorine through polyvinylidene fluoride\u003c\/li\u003e\n\u003cli\u003e7.6.6 Cracking of a Nylon 6 outsert moulding\u003c\/li\u003e\n\u003cli\u003e7.6.7 Nylon 66 drive coupling\u003c\/li\u003e\n\u003cli\u003e7.6.8 Blistering of a glass-reinforced plastic laminate\u003c\/li\u003e\n\u003cli\u003e7.6.9 Polysulphone filter bowl\u003c\/li\u003e\n\u003cli\u003e7.6.10 Polyvinyl chloride skylights\u003c\/li\u003e\n\u003cli\u003e7.6.11 Polypropylene scooter wheels\u003c\/li\u003e\n\u003cli\u003e7.6.12 Epoxy flooring\u003c\/li\u003e\n\u003cli\u003e7.6.13 Valve sleeves\n\u003cp\u003eAbbreviations and Acronyms \u003cbr\u003eIndex\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDuring his 30 years with Rapra, until his recent retirement, Dr. Wright specialized in the failure of plastics materials and products, researching into critical issues of materials durability, such as creep, fatigue and environmental stress cracking. He published around 90 technical papers and 3 books and was involved in the diagnosis of some 5,000 product failures, making him a leading expert in this field."}
Fatigue and Tribologic...
$299.00
{"id":11242223748,"title":"Fatigue and Tribological Properties of Plastics and Elastomers, 2nd Edition","handle":"978-0-08-096450-8","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Laurence W. McKeen \u003cbr\u003eISBN 978-0-08-096450-8 \u003cbr\u003e\u003cbr\u003epages 312, hardbound\n\u003ch5\u003eSummary\u003c\/h5\u003e\nFor all practical purposes, the useful life of a plastic component is equal to its fatigue life under conditions of cyclic loading such as those that occur in vibration. Equally important to materials engineers and designers are abrasion, friction, and wear—tribological properties. Over 80 generic families are covered including thermoplastics, thermosets, thermoplastic elastomers, and rubbers. Neat resins, blends, and alloys, plastics with various combinations of fillers, additives and more are covered. Also, covers plastics mated to plastics and metals. \u003cbr\u003eBased on the premisses that 20 to 80% of material failure is caused by fatigue, a detailed analysis of the existing data is made available in this volume. The book contains the introduction to related phenomena, such as crack initiation and growth, ductile to brittle transitions, factors related to fatigue. The tribological properties are discussed in the next section, including wear factor, a coefficient of friction, PV limit, testing methods, and additives to reduce wear. \u003cbr\u003e\u003cbr\u003eThe sections included in the introduction are further elaborated in the chapters devoted to materials. There are 68 chapters on fatigue resistance of different families of polymers and plastics. The second part includes 31 chapters on tribological properties of different families of polymers and plastics. The materials in these two sections are divided into subsections of thermoplastics, thermoplastic alloys, thermosets, and thermoplastic elastomers which contain chapters on generic polymer families. \u003cbr\u003e\u003cbr\u003eEach chapter contains a discussion of properties of commercial materials falling into this group. For each of commercial products, the information is given on parameters which affect the performance of a given material, modes of failure, and advantages of the material. \u003cbr\u003e\u003cbr\u003eEffect of additives, glass reinforcement, molecular weight, and operating variables are analyzed in the context of fatigue resistance. The graphical representation of results of testing follows the discussion. Typical data include stress vs. cycles to failure and fatigue propagation. \u003cbr\u003e\u003cbr\u003eThe tribological properties are analyzed in a similar manner, including analysis of material properties and composition factors which influence material performance, followed by graphs containing data. Tribological properties are characterized by wear factors of material and mating surface, static and dynamic coefficients of friction, limiting pressure velocity, Taber abrasion, NBS abrasion index and weight loss. \u003cbr\u003e\u003cbr\u003eProperties discussed in this volume are given as a function of pressure velocity, temperature, elapsed time, humidity, material composition, frequency, specimen size, loading conditions, atmospheric conditions, specimen geometry, etc. The above brief overview of content shows that this data bank offers comprehensive treatment of the subject. The data included in this volume were collected from close to 500 sources of information on fatigue and wear. \u003cbr\u003e\u003cbr\u003eConsidering that fatigue and wear are the major causes of plastic failure, this volume should be consulted by anyone who works with these materials for the purpose of the design of new products, their production, and use. This database is a truly unique resource of information on the subject. It saves the time of product development, assists in material choice, and may help to reduce costly failures.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eIntroduction to Fatigue; Introduction to the Tribology of Plastics and Elastomers; Introduction to Plastics and Polymers; Styrenics; polyethers; Polyesters; Polyimides; Polyamides; polyolefins and Acrylics; Thermoplastic Elastomers; Fluoropolymers; High Temperature Plastics; Appendices; abbreviations, Tradenames; Conversion Factors\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nLaurence W. McKeen, DuPont Teflon Finishes Group (former), Delaware, U.S.A.","published_at":"2017-06-22T21:13:54-04:00","created_at":"2017-06-22T21:13:54-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2009","abrasion","additives","alloys","blends","book","coefficient","crack","elastomers","failure","fatigue","friction","material","mating","metal","plastics","PV","rubbers","static","stress","surface","thermoplastics","thermosets","tribological properties","wear","wear factor","weight loss"],"price":29900,"price_min":29900,"price_max":29900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378381252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fatigue and Tribological Properties of Plastics and Elastomers, 2nd Edition","public_title":null,"options":["Default Title"],"price":29900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-08-096450-8","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-096450-8.jpg?v=1499375976"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-096450-8.jpg?v=1499375976","options":["Title"],"media":[{"alt":null,"id":354795323485,"position":1,"preview_image":{"aspect_ratio":0.764,"height":450,"width":344,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-096450-8.jpg?v=1499375976"},"aspect_ratio":0.764,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08-096450-8.jpg?v=1499375976","width":344}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Laurence W. McKeen \u003cbr\u003eISBN 978-0-08-096450-8 \u003cbr\u003e\u003cbr\u003epages 312, hardbound\n\u003ch5\u003eSummary\u003c\/h5\u003e\nFor all practical purposes, the useful life of a plastic component is equal to its fatigue life under conditions of cyclic loading such as those that occur in vibration. Equally important to materials engineers and designers are abrasion, friction, and wear—tribological properties. Over 80 generic families are covered including thermoplastics, thermosets, thermoplastic elastomers, and rubbers. Neat resins, blends, and alloys, plastics with various combinations of fillers, additives and more are covered. Also, covers plastics mated to plastics and metals. \u003cbr\u003eBased on the premisses that 20 to 80% of material failure is caused by fatigue, a detailed analysis of the existing data is made available in this volume. The book contains the introduction to related phenomena, such as crack initiation and growth, ductile to brittle transitions, factors related to fatigue. The tribological properties are discussed in the next section, including wear factor, a coefficient of friction, PV limit, testing methods, and additives to reduce wear. \u003cbr\u003e\u003cbr\u003eThe sections included in the introduction are further elaborated in the chapters devoted to materials. There are 68 chapters on fatigue resistance of different families of polymers and plastics. The second part includes 31 chapters on tribological properties of different families of polymers and plastics. The materials in these two sections are divided into subsections of thermoplastics, thermoplastic alloys, thermosets, and thermoplastic elastomers which contain chapters on generic polymer families. \u003cbr\u003e\u003cbr\u003eEach chapter contains a discussion of properties of commercial materials falling into this group. For each of commercial products, the information is given on parameters which affect the performance of a given material, modes of failure, and advantages of the material. \u003cbr\u003e\u003cbr\u003eEffect of additives, glass reinforcement, molecular weight, and operating variables are analyzed in the context of fatigue resistance. The graphical representation of results of testing follows the discussion. Typical data include stress vs. cycles to failure and fatigue propagation. \u003cbr\u003e\u003cbr\u003eThe tribological properties are analyzed in a similar manner, including analysis of material properties and composition factors which influence material performance, followed by graphs containing data. Tribological properties are characterized by wear factors of material and mating surface, static and dynamic coefficients of friction, limiting pressure velocity, Taber abrasion, NBS abrasion index and weight loss. \u003cbr\u003e\u003cbr\u003eProperties discussed in this volume are given as a function of pressure velocity, temperature, elapsed time, humidity, material composition, frequency, specimen size, loading conditions, atmospheric conditions, specimen geometry, etc. The above brief overview of content shows that this data bank offers comprehensive treatment of the subject. The data included in this volume were collected from close to 500 sources of information on fatigue and wear. \u003cbr\u003e\u003cbr\u003eConsidering that fatigue and wear are the major causes of plastic failure, this volume should be consulted by anyone who works with these materials for the purpose of the design of new products, their production, and use. This database is a truly unique resource of information on the subject. It saves the time of product development, assists in material choice, and may help to reduce costly failures.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eIntroduction to Fatigue; Introduction to the Tribology of Plastics and Elastomers; Introduction to Plastics and Polymers; Styrenics; polyethers; Polyesters; Polyimides; Polyamides; polyolefins and Acrylics; Thermoplastic Elastomers; Fluoropolymers; High Temperature Plastics; Appendices; abbreviations, Tradenames; Conversion Factors\u003c\/p\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nLaurence W. McKeen, DuPont Teflon Finishes Group (former), Delaware, U.S.A."}
Feedstock Recycling an...
$480.00
{"id":11242207940,"title":"Feedstock Recycling and Pyrolysis of Waste Plastics: Converting Waste Plastics into Diesel and Other Fuels","handle":"978-0-470-02152-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Eds. Scheirs, Walter Kaminsky \u003cbr\u003eISBN 978-0-470-02152-1 \u003cbr\u003e\u003cbr\u003epages 816, Hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill. \u003cbr\u003e\u003cbr\u003eThis book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic\/waste oil, waste plastics\/coal, and waste plastics\/rubber.\u003cbr\u003e\u003cbr\u003e \n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eContributors. \u003cbr\u003eSeries Preface. \u003cbr\u003ePreface. \u003cbr\u003eAbout the Editors. \u003cbr\u003e\u003cstrong\u003eI INTRODUCTION.\u003c\/strong\u003e \u003cbr\u003e1 Introduction to Feedstock Recycling of Plastics (A. Buekens). \u003cbr\u003e\u003cstrong\u003eII CATALYTIC CRACKING.\u003c\/strong\u003e \u003cbr\u003e2 Acid-Catalyzed Cracking of Polyolefins: Primary Reaction Mechanisms (Robert L. White). \u003cbr\u003e3 Catalytic Upgrading of Plastic Wastes (J. Aguado, D. P. Serrano, and J. M. Escola). \u003cbr\u003e4 Thermal and Catalytic Conversion of Polyolefins (Jerzy Walendziewski). \u003cbr\u003e5 Thermal and Catalytic Degradation of Waste HDPE (Kyong-Hwan Lee). \u003cbr\u003e6 Development of a Process for the Continuous Conversion of Waste Plastics Mixtures to Fuel (Takao Masuda and Teruoki Tago). \u003cbr\u003e7 Catalytic Degradation of Plastic Waste to Fuel over Microporous Materials (George Manos). \u003cbr\u003e8 Liquefaction of Municipal Waste Plastics over Acidic and Nonacidic Catalysts (Jale Yanik and Tamer Karayildirim). \u003cbr\u003e9 Kinetic Model of the Chemical and Catalytic Recycling of Waste Polyethylene into Fuels (Norbert Miskolczi). \u003cbr\u003e\u003cstrong\u003eIII QUALITY OF FUELS.\u003c\/strong\u003e \u003cbr\u003e10 Production of Gaseous and Liquid Fuels by Pyrolysis and Gasification of Plastics: Technological Approach (C. Gisèle Jung and André Fontana). \u003cbr\u003e11 Yield and Composition of Gases and Oils\/Waxes from the Feedstock Recycling of Waste Plastic (Paul T. Williams). \u003cbr\u003e12 Composition of Liquid Fuels Derived from the Pyrolysis of Plastics (Marianne Blazsó). \u003cbr\u003e13 Production of Premium Oil Products from Waste Plastic by Pyrolysis and Hydroprocessing (S.J. Miller, N. Shah and G.P. Huffman). \u003cbr\u003e14 The Conversion of Waste Plastics\/Petroleum Residue Mixtures to Transportation Fuels (Mohammad Farhat Ali and Mohammad Nahid Siddiqui). \u003cbr\u003e\u003cstrong\u003eIV REACTOR TYPES.\u003c\/strong\u003e \u003cbr\u003e15 Overview of Commercial Pyrolysis Processes for Waste Plastics (John Scheirs). \u003cbr\u003e16 Fluidized Bed Pyrolysis of Plastic Wastes (Umberto Arena and Maria Laura Mastellone). \u003cbr\u003e17 The Hamburg Fluidized-bed Pyrolysis Process to Recycle Polymer Wastes and Tires (Walter Kaminsky). \u003cbr\u003e18 Liquefaction of PVC Mixed Plastics (Thallada Bhaskar and Yusaku Sakata). \u003cbr\u003e19 Liquid Fuel from Plastic Wastes Using Extrusion–Rotary Kiln Reactors (Sam Behzadi and Mohammed Farid). \u003cbr\u003e20 Rotary Kiln Pyrolysis of Polymers Containing Heteroatoms (Andreas Hornung and Helmut Seifert). \u003cbr\u003e21 Microwave Pyrolysis of Plastic Wastes (C. Ludlow-Palafox and H.A. Chase). \u003cbr\u003e22 Continuous Thermal Process for Cracking Polyolefin Wastes to Produce Hydrocarbons (Jean Dispons). \u003cbr\u003e23 Waste Plastic Pyrolysis in Free-Fall Reactors (Ali Y. Bilgesü, M. Çetin Koçak, and Ali Karaduman). \u003cbr\u003e\u003cstrong\u003eV MONOMER RECOVERY.\u003c\/strong\u003e \u003cbr\u003e24 Monomer Recovery of Plastic Waste in a Fluidized Bed Process (Walter Kaminsky). \u003cbr\u003e25 Feedstock Recycling of PET (Toshiaki Yoshioka and Guido Grause). \u003cbr\u003e\u003cstrong\u003eVI ASIAN DEVELOPMENTS.\u003c\/strong\u003e \u003cbr\u003e26 The Liquefaction of Plastic Containers and Packaging in Japan (A. Okuwaki, T. Yoshioka, M. Asai, H. Tachibana, K. Wakai, K. Tada). \u003cbr\u003e27 Process and Equipment for Conversions of Waste Plastics into Fuels (Alka Zadgaonkar). \u003cbr\u003e28 Converting Waste Plastics into Liquid Fuel by Pyrolysis: Developments in China (Yuan Xingzhong). \u003cbr\u003eIndex. \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003eJohn Scheirs\u003c\/strong\u003e is a polymer research specialist with broad interests in polystyrenes and styrenic copolymers. He is the principal consultant with ExcelPlas, a polymer consulting company. John was born in 1965 in Melbourne and studies applied chemistry at the University of Melbourne. He has worked on projects concerning the fracture, stress cracking, processing, characterization and recycling of styrenic polymers. John has authored over 50 scientific papers, including 8 encyclopedia chapters, and a number of books on polymer analysis and polymer recycling. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProfessor Walter Kaminsky\u003c\/strong\u003e studied chemistry at the University of Hamburg. Since 1979 he has been a full professor of technical and macromolecular chemistry at the University of Hamburg. He supervises a group of 20 students and scientists in the field of metallocene\/MAO catalysis and a group in the field of recycling of plastics and scrap tires by pyrolysis. He was President of the Gesellschaft Deutscher Chemiker (GDCh), Hamburg section, Dean of the faculty of chemistry at the University of Hamburg, Director of the Institute for Technical and Macromolecular Chemistry, and is a member of the GDCh, DECHEMA, Naturforscher und Ärzte, Verein Deutscher Ingenieure, and American Chemical Society. He has published more than 200 papers\/books and holds 20 patents. He has organized several international symposia in the field of olefin polymerization and pyrolysis of polymer wastes. He is the advisor for authorities and companies in the fields of metallocene catalysts, polymerization of olefins, and recycling of plastics and environmental protection.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:13:01-04:00","created_at":"2017-06-22T21:13:01-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2006","book","catalytic cracking","degradation","feedstock recycling","fluidized","gases","plastics","polyolefin","pyrolysis","racking","reactor types","recycling","waste"],"price":48000,"price_min":48000,"price_max":48000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378327428,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Feedstock Recycling and Pyrolysis of Waste Plastics: Converting Waste Plastics into Diesel and Other Fuels","public_title":null,"options":["Default Title"],"price":48000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-470-02152-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-02152-1.jpg?v=1499385819"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-02152-1.jpg?v=1499385819","options":["Title"],"media":[{"alt":null,"id":354805710941,"position":1,"preview_image":{"aspect_ratio":0.764,"height":450,"width":344,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-02152-1.jpg?v=1499385819"},"aspect_ratio":0.764,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-02152-1.jpg?v=1499385819","width":344}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Eds. Scheirs, Walter Kaminsky \u003cbr\u003eISBN 978-0-470-02152-1 \u003cbr\u003e\u003cbr\u003epages 816, Hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill. \u003cbr\u003e\u003cbr\u003eThis book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic\/waste oil, waste plastics\/coal, and waste plastics\/rubber.\u003cbr\u003e\u003cbr\u003e \n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eContributors. \u003cbr\u003eSeries Preface. \u003cbr\u003ePreface. \u003cbr\u003eAbout the Editors. \u003cbr\u003e\u003cstrong\u003eI INTRODUCTION.\u003c\/strong\u003e \u003cbr\u003e1 Introduction to Feedstock Recycling of Plastics (A. Buekens). \u003cbr\u003e\u003cstrong\u003eII CATALYTIC CRACKING.\u003c\/strong\u003e \u003cbr\u003e2 Acid-Catalyzed Cracking of Polyolefins: Primary Reaction Mechanisms (Robert L. White). \u003cbr\u003e3 Catalytic Upgrading of Plastic Wastes (J. Aguado, D. P. Serrano, and J. M. Escola). \u003cbr\u003e4 Thermal and Catalytic Conversion of Polyolefins (Jerzy Walendziewski). \u003cbr\u003e5 Thermal and Catalytic Degradation of Waste HDPE (Kyong-Hwan Lee). \u003cbr\u003e6 Development of a Process for the Continuous Conversion of Waste Plastics Mixtures to Fuel (Takao Masuda and Teruoki Tago). \u003cbr\u003e7 Catalytic Degradation of Plastic Waste to Fuel over Microporous Materials (George Manos). \u003cbr\u003e8 Liquefaction of Municipal Waste Plastics over Acidic and Nonacidic Catalysts (Jale Yanik and Tamer Karayildirim). \u003cbr\u003e9 Kinetic Model of the Chemical and Catalytic Recycling of Waste Polyethylene into Fuels (Norbert Miskolczi). \u003cbr\u003e\u003cstrong\u003eIII QUALITY OF FUELS.\u003c\/strong\u003e \u003cbr\u003e10 Production of Gaseous and Liquid Fuels by Pyrolysis and Gasification of Plastics: Technological Approach (C. Gisèle Jung and André Fontana). \u003cbr\u003e11 Yield and Composition of Gases and Oils\/Waxes from the Feedstock Recycling of Waste Plastic (Paul T. Williams). \u003cbr\u003e12 Composition of Liquid Fuels Derived from the Pyrolysis of Plastics (Marianne Blazsó). \u003cbr\u003e13 Production of Premium Oil Products from Waste Plastic by Pyrolysis and Hydroprocessing (S.J. Miller, N. Shah and G.P. Huffman). \u003cbr\u003e14 The Conversion of Waste Plastics\/Petroleum Residue Mixtures to Transportation Fuels (Mohammad Farhat Ali and Mohammad Nahid Siddiqui). \u003cbr\u003e\u003cstrong\u003eIV REACTOR TYPES.\u003c\/strong\u003e \u003cbr\u003e15 Overview of Commercial Pyrolysis Processes for Waste Plastics (John Scheirs). \u003cbr\u003e16 Fluidized Bed Pyrolysis of Plastic Wastes (Umberto Arena and Maria Laura Mastellone). \u003cbr\u003e17 The Hamburg Fluidized-bed Pyrolysis Process to Recycle Polymer Wastes and Tires (Walter Kaminsky). \u003cbr\u003e18 Liquefaction of PVC Mixed Plastics (Thallada Bhaskar and Yusaku Sakata). \u003cbr\u003e19 Liquid Fuel from Plastic Wastes Using Extrusion–Rotary Kiln Reactors (Sam Behzadi and Mohammed Farid). \u003cbr\u003e20 Rotary Kiln Pyrolysis of Polymers Containing Heteroatoms (Andreas Hornung and Helmut Seifert). \u003cbr\u003e21 Microwave Pyrolysis of Plastic Wastes (C. Ludlow-Palafox and H.A. Chase). \u003cbr\u003e22 Continuous Thermal Process for Cracking Polyolefin Wastes to Produce Hydrocarbons (Jean Dispons). \u003cbr\u003e23 Waste Plastic Pyrolysis in Free-Fall Reactors (Ali Y. Bilgesü, M. Çetin Koçak, and Ali Karaduman). \u003cbr\u003e\u003cstrong\u003eV MONOMER RECOVERY.\u003c\/strong\u003e \u003cbr\u003e24 Monomer Recovery of Plastic Waste in a Fluidized Bed Process (Walter Kaminsky). \u003cbr\u003e25 Feedstock Recycling of PET (Toshiaki Yoshioka and Guido Grause). \u003cbr\u003e\u003cstrong\u003eVI ASIAN DEVELOPMENTS.\u003c\/strong\u003e \u003cbr\u003e26 The Liquefaction of Plastic Containers and Packaging in Japan (A. Okuwaki, T. Yoshioka, M. Asai, H. Tachibana, K. Wakai, K. Tada). \u003cbr\u003e27 Process and Equipment for Conversions of Waste Plastics into Fuels (Alka Zadgaonkar). \u003cbr\u003e28 Converting Waste Plastics into Liquid Fuel by Pyrolysis: Developments in China (Yuan Xingzhong). \u003cbr\u003eIndex. \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003eJohn Scheirs\u003c\/strong\u003e is a polymer research specialist with broad interests in polystyrenes and styrenic copolymers. He is the principal consultant with ExcelPlas, a polymer consulting company. John was born in 1965 in Melbourne and studies applied chemistry at the University of Melbourne. He has worked on projects concerning the fracture, stress cracking, processing, characterization and recycling of styrenic polymers. John has authored over 50 scientific papers, including 8 encyclopedia chapters, and a number of books on polymer analysis and polymer recycling. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProfessor Walter Kaminsky\u003c\/strong\u003e studied chemistry at the University of Hamburg. Since 1979 he has been a full professor of technical and macromolecular chemistry at the University of Hamburg. He supervises a group of 20 students and scientists in the field of metallocene\/MAO catalysis and a group in the field of recycling of plastics and scrap tires by pyrolysis. He was President of the Gesellschaft Deutscher Chemiker (GDCh), Hamburg section, Dean of the faculty of chemistry at the University of Hamburg, Director of the Institute for Technical and Macromolecular Chemistry, and is a member of the GDCh, DECHEMA, Naturforscher und Ärzte, Verein Deutscher Ingenieure, and American Chemical Society. He has published more than 200 papers\/books and holds 20 patents. He has organized several international symposia in the field of olefin polymerization and pyrolysis of polymer wastes. He is the advisor for authorities and companies in the fields of metallocene catalysts, polymerization of olefins, and recycling of plastics and environmental protection.\u003cbr\u003e\u003cbr\u003e"}
Filled PolymersScience...
$170.00
{"id":11242222596,"title":"Filled PolymersScience and Industrial Applications","handle":"978-1-4398004-2-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Jean L. Leblanc \u003cbr\u003eISBN 978-1-4398004-2-3 \u003cbr\u003e\u003cbr\u003ePages: 444 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe idea of mixing single available materials into compounds to fulfill a set of desired properties is likely as old as mankind. Highly sophisticated polymer applications would simply be impossible without the enhancement of some of their properties through the addition of fine mineral particles or synthetic or natural short fibers. Many filled polymers, either thermoplastics or vulcanizable rubbers, have different chemical natures but exhibit common singular properties. An understanding of why they do so is likely to be the source of promising scientific and engineering developments—and Filled Polymers: Science and Industrial Applications thoroughly explores the question. \u003cbr\u003e\u003cbr\u003eBased on the author’s 30 years of research, engineering activities, and teaching in the field of complex polymer systems, this comprehensive survey of polymer applications illustrates their commonalities and the scientific background behind their many industrial uses. The text analyzes theoretical considerations which explain the origin of the singular properties of filled polymers, and it includes appendices which feature a selection of calculation worksheets that offer numerical illustrations of several of the theoretical considerations discussed in the book.\u003cbr\u003e\u003cbr\u003eOur understanding of polymer reinforcement remains incomplete because any progress in the field is strongly connected with either the availability of appropriate experimental and observation techniques or theoretical views about polymer-filler interactions, or both. This book presents tools—such as equations tested with familiar calculation software—to clarify these concepts and take understanding to the highest possible level.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003eIntroduction\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eScope of the Book\u003cbr\u003e\u003cbr\u003eFilled Polymers vs. Polymer Nanocomposites\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTypes of Fillers\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eConcept of Reinforcement\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTypical Fillers for Polymers\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCarbon Black\u003cbr\u003e\u003cbr\u003eWhite Fillers\u003cbr\u003e\u003cbr\u003eShort Synthetic Fibers\u003cbr\u003e\u003cbr\u003eShort Fibers of Natural Origin\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAppendix\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCarbon Black Data\u003cbr\u003e\u003cbr\u003eMedalia’s Floc Simulation for Carbon Black Aggregate\u003cbr\u003e\u003cbr\u003eMedalia’s Aggregate Morphology Approach\u003cbr\u003e\u003cbr\u003eCarbon Black: Number of Particles\/Aggregate\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers and Carbon Black\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eElastomers and Carbon Black (CB)\u003cbr\u003e\u003cbr\u003eThermoplastics and Carbon Black \u003cbr\u003e\u003cbr\u003eAppendix\u003cbr\u003e\u003cbr\u003eNetwork Junction Theory\u003cbr\u003e\u003cbr\u003eKraus Deagglomeration–Reagglomeration Model for Dynamic Strain Softening (DSS)\u003cbr\u003e\u003cbr\u003eUlmer Modification of the Kraus Model for Dynamic Strain Softening (DSS): Fitting the Model\u003cbr\u003e\u003cbr\u003eAggregates Flocculation\/Entanglement\u003cbr\u003e\u003cbr\u003eModel (Cluster–Cluster Aggregation (CCA) Model, Klüppel et al.)\u003cbr\u003e\u003cbr\u003eLion et al. Model for Dynamic Strain Softening (DSS)\u003cbr\u003e\u003cbr\u003eMaier and Göritz Model for Dynamic Strain Softening (DSS)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers and White Fillers\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eElastomers and White Fillers\u003cbr\u003e\u003cbr\u003eThermoplastics and White Fillers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAppendix\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAdsorption Kinetics of Silica on Silicone Polymers\u003cbr\u003e\u003cbr\u003eModeling the Shear Viscosity Function of Filled\u003cbr\u003e\u003cbr\u003ePolymer Systems\u003cbr\u003e\u003cbr\u003eModels for the Rheology of Suspensions of Rigid Particles,\u003cbr\u003e\u003cbr\u003eInvolving the Maximum Packing Fraction Φm\u003cbr\u003e\u003cbr\u003eAssessing the Capabilities of Model for the Shear\u003cbr\u003e\u003cbr\u003eViscosity Function of Filled Polymers\u003cbr\u003e\u003cbr\u003eExpanding the Krieger–Dougherty Relationship\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers and Short Fibers\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGeneralities\u003cbr\u003e\u003cbr\u003eMicromechanic Models for Short Fibers-Filled Polymer\u003cbr\u003e\u003cbr\u003eComposites\u003cbr\u003e\u003cbr\u003eThermoplastics and Short Glass Fibers\u003cbr\u003e\u003cbr\u003eTypical Rheological Aspect of Short Fiber-Filled\u003cbr\u003e\u003cbr\u003eThermoplastic Melts\u003cbr\u003e\u003cbr\u003eThermoplastics and Short Fibers of Natural Origin\u003cbr\u003e\u003cbr\u003eElastomers and Short Fibers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAppendix\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eShort Fiber-Reinforced Composites: Minimum Fiber Aspect Ratio\u003cbr\u003e\u003cbr\u003eHalpin–Tsai Equations for Short Fibers Filled Systems: Numerical Illustration\u003cbr\u003e\u003cbr\u003eNielsen Modification of Halpin–Tsai Equations with Respect to the Maximum Packing Fraction: Numerical Illustration\u003cbr\u003e\u003cbr\u003eMori–Tanaka’s Average Stress Concept: Tandon–Weng\u003cbr\u003e\u003cbr\u003eExpressions for Randomly Distributed Ellipsoidal (Fiber-Like) Particles: Numerical Illustration\u003cbr\u003e\u003cbr\u003eShear Lag Model: Numerical illustration\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIndex\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJean L. Leblanc is the director of the Polymer Rheology and Processing Laboratory at the University P \u0026amp; M Curie in Paris. He has published more than 120 scientific papers and two books, contributed chapters in several collective books, made numerous presentations in international conferences, and has given seminars in Brazil, Canada, Thailand, the USA, and several European countries.","published_at":"2017-06-22T21:13:50-04:00","created_at":"2017-06-22T21:13:50-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2009","book","fillers","p-properties","polymer","polymer-fillers interactions","properties","reinforcement"],"price":17000,"price_min":17000,"price_max":17000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378376388,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Filled PolymersScience and Industrial Applications","public_title":null,"options":["Default Title"],"price":17000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-4398004-2-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-4398004-2-3.jpg?v=1499385887"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4398004-2-3.jpg?v=1499385887","options":["Title"],"media":[{"alt":null,"id":354805776477,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4398004-2-3.jpg?v=1499385887"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4398004-2-3.jpg?v=1499385887","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Jean L. Leblanc \u003cbr\u003eISBN 978-1-4398004-2-3 \u003cbr\u003e\u003cbr\u003ePages: 444 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe idea of mixing single available materials into compounds to fulfill a set of desired properties is likely as old as mankind. Highly sophisticated polymer applications would simply be impossible without the enhancement of some of their properties through the addition of fine mineral particles or synthetic or natural short fibers. Many filled polymers, either thermoplastics or vulcanizable rubbers, have different chemical natures but exhibit common singular properties. An understanding of why they do so is likely to be the source of promising scientific and engineering developments—and Filled Polymers: Science and Industrial Applications thoroughly explores the question. \u003cbr\u003e\u003cbr\u003eBased on the author’s 30 years of research, engineering activities, and teaching in the field of complex polymer systems, this comprehensive survey of polymer applications illustrates their commonalities and the scientific background behind their many industrial uses. The text analyzes theoretical considerations which explain the origin of the singular properties of filled polymers, and it includes appendices which feature a selection of calculation worksheets that offer numerical illustrations of several of the theoretical considerations discussed in the book.\u003cbr\u003e\u003cbr\u003eOur understanding of polymer reinforcement remains incomplete because any progress in the field is strongly connected with either the availability of appropriate experimental and observation techniques or theoretical views about polymer-filler interactions, or both. This book presents tools—such as equations tested with familiar calculation software—to clarify these concepts and take understanding to the highest possible level.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003eIntroduction\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eScope of the Book\u003cbr\u003e\u003cbr\u003eFilled Polymers vs. Polymer Nanocomposites\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTypes of Fillers\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eConcept of Reinforcement\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTypical Fillers for Polymers\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCarbon Black\u003cbr\u003e\u003cbr\u003eWhite Fillers\u003cbr\u003e\u003cbr\u003eShort Synthetic Fibers\u003cbr\u003e\u003cbr\u003eShort Fibers of Natural Origin\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAppendix\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCarbon Black Data\u003cbr\u003e\u003cbr\u003eMedalia’s Floc Simulation for Carbon Black Aggregate\u003cbr\u003e\u003cbr\u003eMedalia’s Aggregate Morphology Approach\u003cbr\u003e\u003cbr\u003eCarbon Black: Number of Particles\/Aggregate\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers and Carbon Black\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eElastomers and Carbon Black (CB)\u003cbr\u003e\u003cbr\u003eThermoplastics and Carbon Black \u003cbr\u003e\u003cbr\u003eAppendix\u003cbr\u003e\u003cbr\u003eNetwork Junction Theory\u003cbr\u003e\u003cbr\u003eKraus Deagglomeration–Reagglomeration Model for Dynamic Strain Softening (DSS)\u003cbr\u003e\u003cbr\u003eUlmer Modification of the Kraus Model for Dynamic Strain Softening (DSS): Fitting the Model\u003cbr\u003e\u003cbr\u003eAggregates Flocculation\/Entanglement\u003cbr\u003e\u003cbr\u003eModel (Cluster–Cluster Aggregation (CCA) Model, Klüppel et al.)\u003cbr\u003e\u003cbr\u003eLion et al. Model for Dynamic Strain Softening (DSS)\u003cbr\u003e\u003cbr\u003eMaier and Göritz Model for Dynamic Strain Softening (DSS)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers and White Fillers\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eElastomers and White Fillers\u003cbr\u003e\u003cbr\u003eThermoplastics and White Fillers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAppendix\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAdsorption Kinetics of Silica on Silicone Polymers\u003cbr\u003e\u003cbr\u003eModeling the Shear Viscosity Function of Filled\u003cbr\u003e\u003cbr\u003ePolymer Systems\u003cbr\u003e\u003cbr\u003eModels for the Rheology of Suspensions of Rigid Particles,\u003cbr\u003e\u003cbr\u003eInvolving the Maximum Packing Fraction Φm\u003cbr\u003e\u003cbr\u003eAssessing the Capabilities of Model for the Shear\u003cbr\u003e\u003cbr\u003eViscosity Function of Filled Polymers\u003cbr\u003e\u003cbr\u003eExpanding the Krieger–Dougherty Relationship\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers and Short Fibers\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGeneralities\u003cbr\u003e\u003cbr\u003eMicromechanic Models for Short Fibers-Filled Polymer\u003cbr\u003e\u003cbr\u003eComposites\u003cbr\u003e\u003cbr\u003eThermoplastics and Short Glass Fibers\u003cbr\u003e\u003cbr\u003eTypical Rheological Aspect of Short Fiber-Filled\u003cbr\u003e\u003cbr\u003eThermoplastic Melts\u003cbr\u003e\u003cbr\u003eThermoplastics and Short Fibers of Natural Origin\u003cbr\u003e\u003cbr\u003eElastomers and Short Fibers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAppendix\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eShort Fiber-Reinforced Composites: Minimum Fiber Aspect Ratio\u003cbr\u003e\u003cbr\u003eHalpin–Tsai Equations for Short Fibers Filled Systems: Numerical Illustration\u003cbr\u003e\u003cbr\u003eNielsen Modification of Halpin–Tsai Equations with Respect to the Maximum Packing Fraction: Numerical Illustration\u003cbr\u003e\u003cbr\u003eMori–Tanaka’s Average Stress Concept: Tandon–Weng\u003cbr\u003e\u003cbr\u003eExpressions for Randomly Distributed Ellipsoidal (Fiber-Like) Particles: Numerical Illustration\u003cbr\u003e\u003cbr\u003eShear Lag Model: Numerical illustration\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIndex\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJean L. Leblanc is the director of the Polymer Rheology and Processing Laboratory at the University P \u0026amp; M Curie in Paris. He has published more than 120 scientific papers and two books, contributed chapters in several collective books, made numerous presentations in international conferences, and has given seminars in Brazil, Canada, Thailand, the USA, and several European countries."}
Film Properties of Pla...
$275.00
{"id":11242202244,"title":"Film Properties of Plastics and Elastomers, 3rd Edition","handle":"978-1-4557-2551-9","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Laurence W McKeen \u003cbr\u003eISBN 978-1-4557-2551-9 \u003cbr\u003e\u003cbr\u003e320 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis extensively revised second edition is the only data handbook available on the engineering properties of commercial polymeric films details many physical, mechanical, optical, electrical, and permeation properties within the context of specific test parameters, providing a ready reference for comparing materials in the same family as well as materials in different families. Data are presented on the characteristics of 47 major plastic and elastomer packaging materials. New to this edition, the resin chapters each contain textual summary information including category, general description, processing methods, applications, and other facts as appropriate, such as reliability, weatherability, and regulatory approval considerations for use in food and medical packaging. Extensive references are provided.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eReadership\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEngineers, chemists, manufacturers, suppliers, designers and other technical professionals who want a comprehensive reference guide to film properties of plastics and elastomers.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface\u003cbr\u003e1. Introduction to Plastics and Polymers \u003cbr\u003e1.1. Polymerization\u003cbr\u003e1.1.1. Addition Polymerization\u003cbr\u003e1.1.2. Condensation Polymerization\u003cbr\u003e1.2. Copolymers\u003cbr\u003e1.3. Linear, Branched, and Crosslinked Polymers\u003cbr\u003e1.4. Polarity\u003cbr\u003e1.5. Unsaturation\u003cbr\u003e1.6. Steric Hindrance\u003cbr\u003e1.7. Isomers\u003cbr\u003e1.7.1. Structural isomers\u003cbr\u003e1.7.2. Geometric Isomers\u003cbr\u003e1.7.3. Stereosiomers - Syndiotactic, Isotactic, Atactic\u003cbr\u003e1.8. Inter and Intramolecular attractions in polymers\u003cbr\u003e1.8.1. Hydrogen Bonding\u003cbr\u003e1.8.2. Van der waals Forces\u003cbr\u003e1.8.3. Chain Entanglement\u003cbr\u003e1.9. General Classifications\u003cbr\u003e1.9.1. Molecular Weight\u003cbr\u003e1.9.2. Thermosets vs. Thermoplastics\u003cbr\u003e1.9.3. Crystalline vs. Amorphous\u003cbr\u003e1.9.4. Orientation\u003cbr\u003e1.10. Plastic Compositions\u003cbr\u003e1.10.1. Polymer Blends\u003cbr\u003e1.10.2. Elastomers\u003cbr\u003e1.10.3. Additives\u003cbr\u003e1.10.3.1. Fillers, Reinforcement, Composites \u003cbr\u003e1.10.3.2. Combustion Modifiers, Fire and Flame Retardants, and Smoke Suppressants\u003cbr\u003e1.10.3.3. Release Agents\u003cbr\u003e1.10.3.4. Slip additives\/Internal Lubricants \u003cbr\u003e1.10.3.5. Antiblock Additives\u003cbr\u003e1.10.3.6. Catalysts\u003cbr\u003e1.10.3.7. Impact Modifiers and Tougheners\u003cbr\u003e1.10.3.8. UV Stabilizers\u003cbr\u003e1.10.3.9. Optical Brighteners\u003cbr\u003e1.10.3.10. Plasticizers\u003cbr\u003e1.10.3.11. Pigments, Extenders, Dyes, Mica\u003cbr\u003e1.10.3.12. Coupling Agents\u003cbr\u003e1.10.3.13. Thermal Stabilizers\u003cbr\u003e1.10.3.14. Antistats\u003cbr\u003e1.11. Summary\u003cbr\u003e2. Chapter 2 - Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers\u003cbr\u003e2.1. Physical property testing of plastic films\u003cbr\u003e2.1.1. Specific gravity, density\u003cbr\u003e2.1.2. Dimensional stability\u003cbr\u003e2.1.3. Hygroscopic expansion\u003cbr\u003e2.1.4. Residual shrinkage\u003cbr\u003e2.1.5. Coefficient of Thermal Expansion\u003cbr\u003e2.1.6. Appearance: Color, Haze, and Gloss\u003cbr\u003e2.1.6.1. Color\u003cbr\u003e2.1.6.2. Gloss measurement\u003cbr\u003e2.1.6.3. Haze measurement\u003cbr\u003e2.1.7. Coefficient of friction\u003cbr\u003e2.2. Mechanical Property Testing of Plastic films\u003cbr\u003e2.2.1. Tensile Properties\u003cbr\u003e2.2.2. Flexural Properties\u003cbr\u003e2.2.3. Folding endurance (MIT)\u003cbr\u003e2.2.4. Puncture properties\u003cbr\u003e2.2.4.1. High speed puncture test\u003cbr\u003e2.2.4.2. Drop Dart Impact Test for Plastics Film\u003cbr\u003e2.2.5. Tear Properties\u003cbr\u003e2.2.5.1. Elmendorf Tear Strength\u003cbr\u003e2.2.5.2. Trouser Tear Resistance\u003cbr\u003e2.3. Thermal Property Testing of Plastic films\u003cbr\u003e2.3.1. Melt Flow Index\u003cbr\u003e2.3.2. melting point\u003cbr\u003e2.3.3. Glass Transition Temperature, Tg\u003cbr\u003e2.3.4. Other Thermal Tests\u003cbr\u003e2.4. Electrical Properties of Films\u003cbr\u003e2.4.1. Dielectric constant (or Relative Permittivity)\u003cbr\u003e2.4.2. Dissipation factor\u003cbr\u003e2.4.3. Dielectric Strength\u003cbr\u003e2.4.4. Surface Resistivity\u003cbr\u003e2.4.5. Volume Resistivity\u003cbr\u003e2.5. Permeation of films\u003cbr\u003e2.5.1. History\u003cbr\u003e2.5.2. Transport of Gases and Vapors through solid materials- \u003cbr\u003e2.5.3. Effusion\u003cbr\u003e2.5.4. Solution-Diffusion and Pore-flow Models\u003cbr\u003e2.5.4.1. Dependence of Permeability, Diffusion and Solubility Pressure\u003cbr\u003e2.5.4.2. Dependence of Permeability, Diffusion and Solubility on Temperature - The Arrhenius Equation \u003cbr\u003e2.5.5. Multiple layered films \u003cbr\u003e2.5.6. Permeation and Vapor Transmission Testing \u003cbr\u003e2.5.6.1. Units of Measurement\u003cbr\u003e2.5.6.2. Gas Permeation test cells\u003cbr\u003e2.5.6.3. Vapor Permeation Cup testing\u003cbr\u003e2.5.6.4. Standard Tests for permeation and vapor transmission\u003cbr\u003e3. Production of films\u003cbr\u003e3.1. Extrusion\u003cbr\u003e3.2. Blown Film\u003cbr\u003e3.3. Calendaring\u003cbr\u003e3.4. Casting film lines\u003cbr\u003e3.5. Post film formation processing \u003cbr\u003e3.6. Web coating\u003cbr\u003e3.6.1. Gravure Coating\u003cbr\u003e3.6.2. Reverse Roll Coating\u003cbr\u003e3.6.3. Knife On Roll Coating\u003cbr\u003e3.6.4. Metering Rod (Meyer Rod) Coating\u003cbr\u003e3.6.5. Slot Die (Slot, Extrusion) Coating\u003cbr\u003e3.6.6. Immersion (Dip) Coating\u003cbr\u003e3.6.7. Vacuum deposition\u003cbr\u003e3.6.8. Web Coating process summary\u003cbr\u003e3.7. Lamination\u003cbr\u003e3.7.1. Hot Roll\/Belt Lamination\u003cbr\u003e3.7.2. Flame Lamination\u003cbr\u003e3.8. Orientation\u003cbr\u003e3.8.1. Machine Direction Orientation\u003cbr\u003e3.8.2. Biaxial orientation\u003cbr\u003e3.8.3. Blown Film Orientation\u003cbr\u003e3.9. Skiving\u003cbr\u003e3.10. Coatings\u003cbr\u003e3.11. Summary\u003cbr\u003e4. Markets and Applications for films\u003cbr\u003e4.1. Barrier Films in packaging \u003cbr\u003e4.1.1. Water Vapor\u003cbr\u003e4.1.2. Atmospheric Gases\u003cbr\u003e4.1.3. Odors and Flavors\u003cbr\u003e4.1.4. Markets and Applications of barrier films\u003cbr\u003e4.1.5. Some illustrated applications of multiple layered films\u003cbr\u003e5. Styrenic Plastics\u003cbr\u003e5.1. Acrylonitrile-Butadiene-Styrene Copolymer (ABS) \u003cbr\u003e5.2. Acrylonitrile-Styrene-Acrylate Copolymer (ASA)\u003cbr\u003e5.3. Polystyrene (PS) \u003cbr\u003e5.4. Styrene-Acrylonitrile Copolymer (SAN)\u003cbr\u003e6. Polyesters\u003cbr\u003e6.1. Liquid Crystal Polymer (LCP) \u003cbr\u003e6.2. Polybutylene Terephthalate (PBT)\u003cbr\u003e6.3. Polycarbonate (PC)\u003cbr\u003e6.4. Polycyclohexylene-dimethylene Terephthalate (PCT)\u003cbr\u003e6.5. Polyethylene Napthalate (PEN)\u003cbr\u003e6.6. Polyethylene Terephthalate (PET)\u003cbr\u003e7. Polyimides \u003cbr\u003e7.1. Polyamide-imide\u003cbr\u003e7.2. Polyetherimide\u003cbr\u003e7.3. Polyimide \u003cbr\u003e8. Polyamides (Nylons)\u003cbr\u003e8.1. Polyamide 6 (Nylon 6)\u003cbr\u003e8.2. Polyamide 12 (Nylon 12)\u003cbr\u003e8.3. Polyamide 66 (Nylon 66) \u003cbr\u003e8.4. Polyamide 66\/610 (Nylon 66\/610)\u003cbr\u003e8.5. Polyamide 6\/12 (Nylon 6\/12)\u003cbr\u003e8.6. Polyamide 666 (Nylon 666 or 6\/66)\u003cbr\u003e8.7. Polyamide 6\/69 (Nylon 6\/6.9)\u003cbr\u003e8.8. Nylon 1010\u003cbr\u003e8.9. Specialty Polyamides\u003cbr\u003e8.9.1. Amorphous Polyamides\u003cbr\u003e8.9.2. Nylon PACM-12\u003cbr\u003e8.9.3. PAA - Polyarylamide\u003cbr\u003e9. Polyolefins \u003cbr\u003e9.1. Polyethylene (PE)\u003cbr\u003e9.1.1. Unclassified polyethylene\u003cbr\u003e9.1.2. Ultralow Density polyethylene (ULDPE)\u003cbr\u003e9.1.3. Linear low density polyethylene (LLDPE)\u003cbr\u003e9.1.4. Low density polyethylene (LDPE)\u003cbr\u003e9.1.5. Medium density polyethylene (MDPE)\u003cbr\u003e9.1.6. High density polyethylene (HDPE)\u003cbr\u003e9.2. Polypropylene (PP)\u003cbr\u003e9.3. Polybutene-1 - PB-1\u003cbr\u003e9.4. Polymethyl Pentene (PMP) \u003cbr\u003e9.5. Cyclic Olefin Copolymer (COC)\u003cbr\u003e9.6. Plastomers\u003cbr\u003e10. Polyvinyls \u0026amp; Acrylics\u003cbr\u003e10.1. Ethylene-Vinyl Acetate Copolymer (EVA)\u003cbr\u003e10.2. Ethylene - Vinyl Alcohol Copolymer (EVOH)\u003cbr\u003e10.3. Polyvinyl Alcohol (PVOH)\u003cbr\u003e10.4. Polyvinyl Chloride (PVC)\u003cbr\u003e10.5. Polyvinylidene Chloride (PVDC)\u003cbr\u003e10.6. Polyacrylics\u003cbr\u003e10.7. Acrylonitrile-Methyl Acrylate Copolymer (AMA)\u003cbr\u003e10.8. Ionomers\u003cbr\u003e11. Fluoropolymers\u003cbr\u003e11.1. Polytetrafluoroethylene (PTFE)\u003cbr\u003e11.2. Fluorinated Ethylene Propylene (FEP)\u003cbr\u003e11.3. Perfluoro Alkoxy (PFA)\u003cbr\u003e11.3.1. PFA\u003cbr\u003e11.3.2. MFA\u003cbr\u003e11.4. Amorphous fluoropolymer - Teflon AF®\u003cbr\u003e11.5. Polyvinyl Fluoride (PVF)\u003cbr\u003e11.6. Polychlorotrifluoroethylene (PCTFE)\u003cbr\u003e11.7. Polyvinylidene Fluoride (PVDF)\u003cbr\u003e11.8. Ethylene-Tetrafluoroethylene Copolymer (ETFE)\u003cbr\u003e11.9. Ethylene-Chlorotrifluoroethylene Copolymer (ECTFE)\u003cbr\u003e12. High Temperature\/High Performance Polymers\u003cbr\u003e12.1. Polyether ether ketone (PEEK\u003cbr\u003e12.2. Polysiloxane\u003cbr\u003e12.3. Polyphenylene Sulfide (PPS)\u003cbr\u003e12.4. Polysulfone (PSU)\u003cbr\u003e12.5. Polyethersulfone (PES)\u003cbr\u003e12.6. Polybenzimidazole (PBI)\u003cbr\u003e12.7. Parylene (poly(p-xylylene))\u003cbr\u003e12.8. Polyphenylene sulfone (PPSU)\u003cbr\u003e13. Elastomers and rubbers\u003cbr\u003e13.1. Thermoplastic Polyurethane Elastomers (TPU)\u003cbr\u003e13.2. Olefinic Thermoplastic Elastomers (TPO)\u003cbr\u003e13.3. Thermoplastic Copolyester Elastomers (TPE-E or COPE)\u003cbr\u003e13.4. Thermoplastic Polyether Block Amide Elastomers (PEBA)\u003cbr\u003e13.5. Styrenic Block Copolymer (SBS) Thermoplastic Elastomers\u003cbr\u003e13.6. Syndiotactic 1,2 polybutadiene \u003cbr\u003e14. Renewable Resource or biodegradable polymers \u003cbr\u003e14.1. Cellophane™\u003cbr\u003e14.2. Nitrocellulose\u003cbr\u003e14.3. Cellulose acetate\u003cbr\u003e14.4. Cellulose acetate butyrate\u003cbr\u003e14.5. Ethylcellulose\u003cbr\u003e14.6. Polycaprolactone (PCL)\u003cbr\u003e14.7. Poly (Lactic Acid) (PLA)\u003cbr\u003e14.8. Poly-3-hydroxybutyrate (PHB or PH3B)\u003cbr\u003eAppendices\u003cbr\u003ePermeation Unit Conversion Factors\u003cbr\u003eVapor Transmission rate Conversion factors\u003cbr\u003eIndices\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003e\u003cb\u003eLaurence W McKeen\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eSenior Research Associate, DuPont, Wilmington, DE, USA\u003c\/div\u003e","published_at":"2017-06-22T21:12:44-04:00","created_at":"2017-06-22T21:12:44-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2012","additives","book","electrical","film","Films","lamination","material","mechanical","optical","p-applications","plastics","polymer","properties"],"price":27500,"price_min":27500,"price_max":27500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378310468,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Film Properties of Plastics and Elastomers, 3rd Edition","public_title":null,"options":["Default Title"],"price":27500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-4557-2551-9","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-4557-2551-9.jpg?v=1499386111"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4557-2551-9.jpg?v=1499386111","options":["Title"],"media":[{"alt":null,"id":354806726749,"position":1,"preview_image":{"aspect_ratio":0.771,"height":450,"width":347,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4557-2551-9.jpg?v=1499386111"},"aspect_ratio":0.771,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-4557-2551-9.jpg?v=1499386111","width":347}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Laurence W McKeen \u003cbr\u003eISBN 978-1-4557-2551-9 \u003cbr\u003e\u003cbr\u003e320 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis extensively revised second edition is the only data handbook available on the engineering properties of commercial polymeric films details many physical, mechanical, optical, electrical, and permeation properties within the context of specific test parameters, providing a ready reference for comparing materials in the same family as well as materials in different families. Data are presented on the characteristics of 47 major plastic and elastomer packaging materials. New to this edition, the resin chapters each contain textual summary information including category, general description, processing methods, applications, and other facts as appropriate, such as reliability, weatherability, and regulatory approval considerations for use in food and medical packaging. Extensive references are provided.\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eReadership\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eEngineers, chemists, manufacturers, suppliers, designers and other technical professionals who want a comprehensive reference guide to film properties of plastics and elastomers.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface\u003cbr\u003e1. Introduction to Plastics and Polymers \u003cbr\u003e1.1. Polymerization\u003cbr\u003e1.1.1. Addition Polymerization\u003cbr\u003e1.1.2. Condensation Polymerization\u003cbr\u003e1.2. Copolymers\u003cbr\u003e1.3. Linear, Branched, and Crosslinked Polymers\u003cbr\u003e1.4. Polarity\u003cbr\u003e1.5. Unsaturation\u003cbr\u003e1.6. Steric Hindrance\u003cbr\u003e1.7. Isomers\u003cbr\u003e1.7.1. Structural isomers\u003cbr\u003e1.7.2. Geometric Isomers\u003cbr\u003e1.7.3. Stereosiomers - Syndiotactic, Isotactic, Atactic\u003cbr\u003e1.8. Inter and Intramolecular attractions in polymers\u003cbr\u003e1.8.1. Hydrogen Bonding\u003cbr\u003e1.8.2. Van der waals Forces\u003cbr\u003e1.8.3. Chain Entanglement\u003cbr\u003e1.9. General Classifications\u003cbr\u003e1.9.1. Molecular Weight\u003cbr\u003e1.9.2. Thermosets vs. Thermoplastics\u003cbr\u003e1.9.3. Crystalline vs. Amorphous\u003cbr\u003e1.9.4. Orientation\u003cbr\u003e1.10. Plastic Compositions\u003cbr\u003e1.10.1. Polymer Blends\u003cbr\u003e1.10.2. Elastomers\u003cbr\u003e1.10.3. Additives\u003cbr\u003e1.10.3.1. Fillers, Reinforcement, Composites \u003cbr\u003e1.10.3.2. Combustion Modifiers, Fire and Flame Retardants, and Smoke Suppressants\u003cbr\u003e1.10.3.3. Release Agents\u003cbr\u003e1.10.3.4. Slip additives\/Internal Lubricants \u003cbr\u003e1.10.3.5. Antiblock Additives\u003cbr\u003e1.10.3.6. Catalysts\u003cbr\u003e1.10.3.7. Impact Modifiers and Tougheners\u003cbr\u003e1.10.3.8. UV Stabilizers\u003cbr\u003e1.10.3.9. Optical Brighteners\u003cbr\u003e1.10.3.10. Plasticizers\u003cbr\u003e1.10.3.11. Pigments, Extenders, Dyes, Mica\u003cbr\u003e1.10.3.12. Coupling Agents\u003cbr\u003e1.10.3.13. Thermal Stabilizers\u003cbr\u003e1.10.3.14. Antistats\u003cbr\u003e1.11. Summary\u003cbr\u003e2. Chapter 2 - Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers\u003cbr\u003e2.1. Physical property testing of plastic films\u003cbr\u003e2.1.1. Specific gravity, density\u003cbr\u003e2.1.2. Dimensional stability\u003cbr\u003e2.1.3. Hygroscopic expansion\u003cbr\u003e2.1.4. Residual shrinkage\u003cbr\u003e2.1.5. Coefficient of Thermal Expansion\u003cbr\u003e2.1.6. Appearance: Color, Haze, and Gloss\u003cbr\u003e2.1.6.1. Color\u003cbr\u003e2.1.6.2. Gloss measurement\u003cbr\u003e2.1.6.3. Haze measurement\u003cbr\u003e2.1.7. Coefficient of friction\u003cbr\u003e2.2. Mechanical Property Testing of Plastic films\u003cbr\u003e2.2.1. Tensile Properties\u003cbr\u003e2.2.2. Flexural Properties\u003cbr\u003e2.2.3. Folding endurance (MIT)\u003cbr\u003e2.2.4. Puncture properties\u003cbr\u003e2.2.4.1. High speed puncture test\u003cbr\u003e2.2.4.2. Drop Dart Impact Test for Plastics Film\u003cbr\u003e2.2.5. Tear Properties\u003cbr\u003e2.2.5.1. Elmendorf Tear Strength\u003cbr\u003e2.2.5.2. Trouser Tear Resistance\u003cbr\u003e2.3. Thermal Property Testing of Plastic films\u003cbr\u003e2.3.1. Melt Flow Index\u003cbr\u003e2.3.2. melting point\u003cbr\u003e2.3.3. Glass Transition Temperature, Tg\u003cbr\u003e2.3.4. Other Thermal Tests\u003cbr\u003e2.4. Electrical Properties of Films\u003cbr\u003e2.4.1. Dielectric constant (or Relative Permittivity)\u003cbr\u003e2.4.2. Dissipation factor\u003cbr\u003e2.4.3. Dielectric Strength\u003cbr\u003e2.4.4. Surface Resistivity\u003cbr\u003e2.4.5. Volume Resistivity\u003cbr\u003e2.5. Permeation of films\u003cbr\u003e2.5.1. History\u003cbr\u003e2.5.2. Transport of Gases and Vapors through solid materials- \u003cbr\u003e2.5.3. Effusion\u003cbr\u003e2.5.4. Solution-Diffusion and Pore-flow Models\u003cbr\u003e2.5.4.1. Dependence of Permeability, Diffusion and Solubility Pressure\u003cbr\u003e2.5.4.2. Dependence of Permeability, Diffusion and Solubility on Temperature - The Arrhenius Equation \u003cbr\u003e2.5.5. Multiple layered films \u003cbr\u003e2.5.6. Permeation and Vapor Transmission Testing \u003cbr\u003e2.5.6.1. Units of Measurement\u003cbr\u003e2.5.6.2. Gas Permeation test cells\u003cbr\u003e2.5.6.3. Vapor Permeation Cup testing\u003cbr\u003e2.5.6.4. Standard Tests for permeation and vapor transmission\u003cbr\u003e3. Production of films\u003cbr\u003e3.1. Extrusion\u003cbr\u003e3.2. Blown Film\u003cbr\u003e3.3. Calendaring\u003cbr\u003e3.4. Casting film lines\u003cbr\u003e3.5. Post film formation processing \u003cbr\u003e3.6. Web coating\u003cbr\u003e3.6.1. Gravure Coating\u003cbr\u003e3.6.2. Reverse Roll Coating\u003cbr\u003e3.6.3. Knife On Roll Coating\u003cbr\u003e3.6.4. Metering Rod (Meyer Rod) Coating\u003cbr\u003e3.6.5. Slot Die (Slot, Extrusion) Coating\u003cbr\u003e3.6.6. Immersion (Dip) Coating\u003cbr\u003e3.6.7. Vacuum deposition\u003cbr\u003e3.6.8. Web Coating process summary\u003cbr\u003e3.7. Lamination\u003cbr\u003e3.7.1. Hot Roll\/Belt Lamination\u003cbr\u003e3.7.2. Flame Lamination\u003cbr\u003e3.8. Orientation\u003cbr\u003e3.8.1. Machine Direction Orientation\u003cbr\u003e3.8.2. Biaxial orientation\u003cbr\u003e3.8.3. Blown Film Orientation\u003cbr\u003e3.9. Skiving\u003cbr\u003e3.10. Coatings\u003cbr\u003e3.11. Summary\u003cbr\u003e4. Markets and Applications for films\u003cbr\u003e4.1. Barrier Films in packaging \u003cbr\u003e4.1.1. Water Vapor\u003cbr\u003e4.1.2. Atmospheric Gases\u003cbr\u003e4.1.3. Odors and Flavors\u003cbr\u003e4.1.4. Markets and Applications of barrier films\u003cbr\u003e4.1.5. Some illustrated applications of multiple layered films\u003cbr\u003e5. Styrenic Plastics\u003cbr\u003e5.1. Acrylonitrile-Butadiene-Styrene Copolymer (ABS) \u003cbr\u003e5.2. Acrylonitrile-Styrene-Acrylate Copolymer (ASA)\u003cbr\u003e5.3. Polystyrene (PS) \u003cbr\u003e5.4. Styrene-Acrylonitrile Copolymer (SAN)\u003cbr\u003e6. Polyesters\u003cbr\u003e6.1. Liquid Crystal Polymer (LCP) \u003cbr\u003e6.2. Polybutylene Terephthalate (PBT)\u003cbr\u003e6.3. Polycarbonate (PC)\u003cbr\u003e6.4. Polycyclohexylene-dimethylene Terephthalate (PCT)\u003cbr\u003e6.5. Polyethylene Napthalate (PEN)\u003cbr\u003e6.6. Polyethylene Terephthalate (PET)\u003cbr\u003e7. Polyimides \u003cbr\u003e7.1. Polyamide-imide\u003cbr\u003e7.2. Polyetherimide\u003cbr\u003e7.3. Polyimide \u003cbr\u003e8. Polyamides (Nylons)\u003cbr\u003e8.1. Polyamide 6 (Nylon 6)\u003cbr\u003e8.2. Polyamide 12 (Nylon 12)\u003cbr\u003e8.3. Polyamide 66 (Nylon 66) \u003cbr\u003e8.4. Polyamide 66\/610 (Nylon 66\/610)\u003cbr\u003e8.5. Polyamide 6\/12 (Nylon 6\/12)\u003cbr\u003e8.6. Polyamide 666 (Nylon 666 or 6\/66)\u003cbr\u003e8.7. Polyamide 6\/69 (Nylon 6\/6.9)\u003cbr\u003e8.8. Nylon 1010\u003cbr\u003e8.9. Specialty Polyamides\u003cbr\u003e8.9.1. Amorphous Polyamides\u003cbr\u003e8.9.2. Nylon PACM-12\u003cbr\u003e8.9.3. PAA - Polyarylamide\u003cbr\u003e9. Polyolefins \u003cbr\u003e9.1. Polyethylene (PE)\u003cbr\u003e9.1.1. Unclassified polyethylene\u003cbr\u003e9.1.2. Ultralow Density polyethylene (ULDPE)\u003cbr\u003e9.1.3. Linear low density polyethylene (LLDPE)\u003cbr\u003e9.1.4. Low density polyethylene (LDPE)\u003cbr\u003e9.1.5. Medium density polyethylene (MDPE)\u003cbr\u003e9.1.6. High density polyethylene (HDPE)\u003cbr\u003e9.2. Polypropylene (PP)\u003cbr\u003e9.3. Polybutene-1 - PB-1\u003cbr\u003e9.4. Polymethyl Pentene (PMP) \u003cbr\u003e9.5. Cyclic Olefin Copolymer (COC)\u003cbr\u003e9.6. Plastomers\u003cbr\u003e10. Polyvinyls \u0026amp; Acrylics\u003cbr\u003e10.1. Ethylene-Vinyl Acetate Copolymer (EVA)\u003cbr\u003e10.2. Ethylene - Vinyl Alcohol Copolymer (EVOH)\u003cbr\u003e10.3. Polyvinyl Alcohol (PVOH)\u003cbr\u003e10.4. Polyvinyl Chloride (PVC)\u003cbr\u003e10.5. Polyvinylidene Chloride (PVDC)\u003cbr\u003e10.6. Polyacrylics\u003cbr\u003e10.7. Acrylonitrile-Methyl Acrylate Copolymer (AMA)\u003cbr\u003e10.8. Ionomers\u003cbr\u003e11. Fluoropolymers\u003cbr\u003e11.1. Polytetrafluoroethylene (PTFE)\u003cbr\u003e11.2. Fluorinated Ethylene Propylene (FEP)\u003cbr\u003e11.3. Perfluoro Alkoxy (PFA)\u003cbr\u003e11.3.1. PFA\u003cbr\u003e11.3.2. MFA\u003cbr\u003e11.4. Amorphous fluoropolymer - Teflon AF®\u003cbr\u003e11.5. Polyvinyl Fluoride (PVF)\u003cbr\u003e11.6. Polychlorotrifluoroethylene (PCTFE)\u003cbr\u003e11.7. Polyvinylidene Fluoride (PVDF)\u003cbr\u003e11.8. Ethylene-Tetrafluoroethylene Copolymer (ETFE)\u003cbr\u003e11.9. Ethylene-Chlorotrifluoroethylene Copolymer (ECTFE)\u003cbr\u003e12. High Temperature\/High Performance Polymers\u003cbr\u003e12.1. Polyether ether ketone (PEEK\u003cbr\u003e12.2. Polysiloxane\u003cbr\u003e12.3. Polyphenylene Sulfide (PPS)\u003cbr\u003e12.4. Polysulfone (PSU)\u003cbr\u003e12.5. Polyethersulfone (PES)\u003cbr\u003e12.6. Polybenzimidazole (PBI)\u003cbr\u003e12.7. Parylene (poly(p-xylylene))\u003cbr\u003e12.8. Polyphenylene sulfone (PPSU)\u003cbr\u003e13. Elastomers and rubbers\u003cbr\u003e13.1. Thermoplastic Polyurethane Elastomers (TPU)\u003cbr\u003e13.2. Olefinic Thermoplastic Elastomers (TPO)\u003cbr\u003e13.3. Thermoplastic Copolyester Elastomers (TPE-E or COPE)\u003cbr\u003e13.4. Thermoplastic Polyether Block Amide Elastomers (PEBA)\u003cbr\u003e13.5. Styrenic Block Copolymer (SBS) Thermoplastic Elastomers\u003cbr\u003e13.6. Syndiotactic 1,2 polybutadiene \u003cbr\u003e14. Renewable Resource or biodegradable polymers \u003cbr\u003e14.1. Cellophane™\u003cbr\u003e14.2. Nitrocellulose\u003cbr\u003e14.3. Cellulose acetate\u003cbr\u003e14.4. Cellulose acetate butyrate\u003cbr\u003e14.5. Ethylcellulose\u003cbr\u003e14.6. Polycaprolactone (PCL)\u003cbr\u003e14.7. Poly (Lactic Acid) (PLA)\u003cbr\u003e14.8. Poly-3-hydroxybutyrate (PHB or PH3B)\u003cbr\u003eAppendices\u003cbr\u003ePermeation Unit Conversion Factors\u003cbr\u003eVapor Transmission rate Conversion factors\u003cbr\u003eIndices\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003e\u003cb\u003eLaurence W McKeen\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003eSenior Research Associate, DuPont, Wilmington, DE, USA\u003c\/div\u003e"}
Fire - Additives and M...
$180.00
{"id":11242233668,"title":"Fire - Additives and Materials","handle":"978-1-85957-034-0","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: P.W. Dufton \u003cbr\u003eISBN 978-1-85957-034-0 \u003cbr\u003e\u003cbr\u003e151 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cstrong\u003eFlame retardants:\u003c\/strong\u003e Organic halogen containing materials, phosphorus containing compounds, inorganic minerals and salts, and many other materials \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers:\u003c\/strong\u003e PE, EVA, PP, PVC, styrenics, polyamides, PPO, polyurethanes, thermosets, polyesters, polycarbonates, PMMA, elastomers \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMarkets:\u003c\/strong\u003e automotive, other land transportation, aircraft, electrical appliances, electronic products, electrical cables, building and construction\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eIntroduction\u003c\/p\u003e\n\u003cp\u003eSummary and Conclusions \u003cbr\u003eFlame Retardant Technologies \u003cbr\u003eAdditive Products and Markets \u003cbr\u003eSuppliers and the Market, Compounders and Converters \u003cbr\u003ePolymer Families and Their Flame Retardancy \u003cbr\u003eEnd-user Industry Markets \u003cbr\u003eLegislation and Regulations\u003c\/p\u003e","published_at":"2017-06-22T21:14:24-04:00","created_at":"2017-06-22T21:14:24-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["1995","aircraft","automotive","book","building","elastomers","electrical appliances","electrical cables","electronic products","EVA","market","Market Report","other land transportation","PE","PMMA","polyamides","polycarbonates","polyesters","polyurethanes","PP","PPO","PVC","styrenics","thermosets"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378414020,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fire - Additives and Materials","public_title":null,"options":["Default Title"],"price":18000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-034-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-034-0.jpg?v=1500048594"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-034-0.jpg?v=1500048594","options":["Title"],"media":[{"alt":null,"id":363545919581,"position":1,"preview_image":{"aspect_ratio":0.706,"height":500,"width":353,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-034-0.jpg?v=1500048594"},"aspect_ratio":0.706,"height":500,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-034-0.jpg?v=1500048594","width":353}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: P.W. Dufton \u003cbr\u003eISBN 978-1-85957-034-0 \u003cbr\u003e\u003cbr\u003e151 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cstrong\u003eFlame retardants:\u003c\/strong\u003e Organic halogen containing materials, phosphorus containing compounds, inorganic minerals and salts, and many other materials \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePolymers:\u003c\/strong\u003e PE, EVA, PP, PVC, styrenics, polyamides, PPO, polyurethanes, thermosets, polyesters, polycarbonates, PMMA, elastomers \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMarkets:\u003c\/strong\u003e automotive, other land transportation, aircraft, electrical appliances, electronic products, electrical cables, building and construction\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eIntroduction\u003c\/p\u003e\n\u003cp\u003eSummary and Conclusions \u003cbr\u003eFlame Retardant Technologies \u003cbr\u003eAdditive Products and Markets \u003cbr\u003eSuppliers and the Market, Compounders and Converters \u003cbr\u003ePolymer Families and Their Flame Retardancy \u003cbr\u003eEnd-user Industry Markets \u003cbr\u003eLegislation and Regulations\u003c\/p\u003e"}
Fire Behavior of Uphol...
$136.00
{"id":11242222916,"title":"Fire Behavior of Upholstered Furniture and Mattresses","handle":"0-8155-1457-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: John Krasny, William Parker, Vytenis Babrauskas \u003cbr\u003eISBN 9780815514572 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book is a collection of the up-to-date science and engineering knowledge in the field of furniture fire flammability. For continuity and perspective, citations to older works are still maintained, even in cases where newer research has brought forth improved methods or better knowledge. Thus, the advancement of the state of the art can be seen in these pages.\u003cbr\u003eIn 1985, two of the present authors (Babrauskas and Krasny) published the first monograph devoted to upholstered furniture flammability. This was issued by National Bureau of Standards (now NIST, National Institute of Standards and Technology) as \"Fire Behavior of Upholstered Furniture\" (NBS Monograph 173). Many new concepts and experimental results have been published since that time. The most comprehensive recent research study in this area has been \"Combustion Behavior of Upholstered Furniture\" (CBUF) which was sponsored by the European Union. Two of the authors, Babrauskas and Krasny, had the privilege of participating in CBUF. This project, as well as many others, resulted in major improvements in this field. Thus, it became opportune to revise the monograph.\u003cbr\u003eTo be most useful to its intended user, this book was reorganized and structured more along the expected lines of enquiry from the user. This involved a major reexamination of the literature, especially coverage of new regulations and standard test methods. The review of regulations, however, is selective. Discussions are focused only on US, UK, and EU activities in this area. While numerous other countries have various regulations affecting aspect of furniture flammability, little if any technical work making reference to such regulations has ever been published in the English language.\u003cbr\u003eIn this book, the term upholstered item will sometimes be used to include upholstered furniture as well as upholstered parts of bedding (solid core and innerspring mattresses and upholstered bed frames). In many cases, however, it is appropriate to consider that statements made about chairs or about upholstered furniture also apply to various other types of upholstered items. Bedding, such as blankets, sheets, pillows, etc., are treated separately.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nChapter 1 provides a brief overview of the structure and materials, fire safety design, fire statistics, and standards development.\u003cbr\u003e\u003cbr\u003eChapter 2 discusses some of the fundamentals of fire which affect the fire safety of upholstered furniture. These include smoldering and flaming ignition, flame spread, heat release, inter-item fire spread, room-fire interaction, flashover, smoke, and toxic gases.\u003cbr\u003e\u003cbr\u003eChapter 3 describes the pertinent test methods and regulations for smoldering and flaming ignition, flame spread, heat release rate (HRR), and smoke and toxic gas production for residential, public, and high-risk occupancies.\u003cbr\u003e\u003cbr\u003eChapter 4 addresses smoldering and flaming ignition and includes the historical development and the details of the ignition tests.\u003cbr\u003e\u003cbr\u003eChapter 5 compares results obtained by different test methods, especially bench-scale and full-scale results, and furniture calorimeter and room results.\u003cbr\u003e\u003cbr\u003eChapter 6 covers fire safety design, considering the effects of upholstered item construction and materials, separately for smoldering (cigarette) and flaming ignition. Emphasis is on thermal behavior, flaming or smoldering; the relative rates of smoke and combustion products release, which are, in the first approximation, related to the HRR for flaming fires, are less extensively reviewed.\u003cbr\u003e\u003cbr\u003eChapter 7 briefly discusses room fire zone and field models as they pertain to furniture fires, furniture fire models, and correlation formulas, and a method for predicting the HRR of composites in the Cone calorimeter based on measurements of the individual components.\u003cbr\u003e\u003cbr\u003eChapter 8 discusses fire hazard analysis and describes a method of predicting the available escape time based on the HRR of the burning furniture.\u003cbr\u003e\u003cbr\u003eChapter 9 offers brief conclusions about the current state of knowledge about furniture flammability.\u003cbr\u003eVytenis Babrauskas\u003cbr\u003eIssaquah, Washington\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJohn Krasny is a longtime fire researcher at the National Institute of Standards and Technology (NIST). He is a well-known authority on the flammability of textiles, both in clothing and furnishing applications. He is now retired. \u003cbr\u003e\u003cbr\u003eDr. William Parker has degrees in Physics and Mechanical Engineering and has been a long time researcher with the U.S. Navy and subsequently at NIST. He has specialized in the combustion of wood, in fire endurance, heat release, and development of thermophysical test methods. He is also retired. \u003cbr\u003e\u003cbr\u003eDr. Vytenis Babrauskas was the first person to be awarded a Ph.D. in Fire Protection Engineering from the University of California, Berkeley. He subsequently spent 17 years at NIST developing fire test methods and engineering design methods. He currently heads up his fire safety R\u0026amp;D firm, Fire Science \u0026amp; Technology, Inc. He is the author of the 1992 textbook \"Heat Release in Fires\" and has authored more than 200 papers and reports.\u003cbr\u003e\u003cbr\u003e","published_at":"2018-02-04T13:09:33-05:00","created_at":"2017-06-22T21:13:51-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2001","death","fire","hazard","heat release rate","protection","toxic gases"],"price":13600,"price_min":13600,"price_max":13600,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378376772,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fire Behavior of Upholstered Furniture and Mattresses","public_title":null,"options":["Default Title"],"price":13600,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"9780815514572","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1457-3.jpg?v=1499386183"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1457-3.jpg?v=1499386183","options":["Title"],"media":[{"alt":null,"id":354807152733,"position":1,"preview_image":{"aspect_ratio":0.685,"height":499,"width":342,"src":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1457-3.jpg?v=1499386183"},"aspect_ratio":0.685,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1457-3.jpg?v=1499386183","width":342}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: John Krasny, William Parker, Vytenis Babrauskas \u003cbr\u003eISBN 9780815514572 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book is a collection of the up-to-date science and engineering knowledge in the field of furniture fire flammability. For continuity and perspective, citations to older works are still maintained, even in cases where newer research has brought forth improved methods or better knowledge. Thus, the advancement of the state of the art can be seen in these pages.\u003cbr\u003eIn 1985, two of the present authors (Babrauskas and Krasny) published the first monograph devoted to upholstered furniture flammability. This was issued by National Bureau of Standards (now NIST, National Institute of Standards and Technology) as \"Fire Behavior of Upholstered Furniture\" (NBS Monograph 173). Many new concepts and experimental results have been published since that time. The most comprehensive recent research study in this area has been \"Combustion Behavior of Upholstered Furniture\" (CBUF) which was sponsored by the European Union. Two of the authors, Babrauskas and Krasny, had the privilege of participating in CBUF. This project, as well as many others, resulted in major improvements in this field. Thus, it became opportune to revise the monograph.\u003cbr\u003eTo be most useful to its intended user, this book was reorganized and structured more along the expected lines of enquiry from the user. This involved a major reexamination of the literature, especially coverage of new regulations and standard test methods. The review of regulations, however, is selective. Discussions are focused only on US, UK, and EU activities in this area. While numerous other countries have various regulations affecting aspect of furniture flammability, little if any technical work making reference to such regulations has ever been published in the English language.\u003cbr\u003eIn this book, the term upholstered item will sometimes be used to include upholstered furniture as well as upholstered parts of bedding (solid core and innerspring mattresses and upholstered bed frames). In many cases, however, it is appropriate to consider that statements made about chairs or about upholstered furniture also apply to various other types of upholstered items. Bedding, such as blankets, sheets, pillows, etc., are treated separately.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nChapter 1 provides a brief overview of the structure and materials, fire safety design, fire statistics, and standards development.\u003cbr\u003e\u003cbr\u003eChapter 2 discusses some of the fundamentals of fire which affect the fire safety of upholstered furniture. These include smoldering and flaming ignition, flame spread, heat release, inter-item fire spread, room-fire interaction, flashover, smoke, and toxic gases.\u003cbr\u003e\u003cbr\u003eChapter 3 describes the pertinent test methods and regulations for smoldering and flaming ignition, flame spread, heat release rate (HRR), and smoke and toxic gas production for residential, public, and high-risk occupancies.\u003cbr\u003e\u003cbr\u003eChapter 4 addresses smoldering and flaming ignition and includes the historical development and the details of the ignition tests.\u003cbr\u003e\u003cbr\u003eChapter 5 compares results obtained by different test methods, especially bench-scale and full-scale results, and furniture calorimeter and room results.\u003cbr\u003e\u003cbr\u003eChapter 6 covers fire safety design, considering the effects of upholstered item construction and materials, separately for smoldering (cigarette) and flaming ignition. Emphasis is on thermal behavior, flaming or smoldering; the relative rates of smoke and combustion products release, which are, in the first approximation, related to the HRR for flaming fires, are less extensively reviewed.\u003cbr\u003e\u003cbr\u003eChapter 7 briefly discusses room fire zone and field models as they pertain to furniture fires, furniture fire models, and correlation formulas, and a method for predicting the HRR of composites in the Cone calorimeter based on measurements of the individual components.\u003cbr\u003e\u003cbr\u003eChapter 8 discusses fire hazard analysis and describes a method of predicting the available escape time based on the HRR of the burning furniture.\u003cbr\u003e\u003cbr\u003eChapter 9 offers brief conclusions about the current state of knowledge about furniture flammability.\u003cbr\u003eVytenis Babrauskas\u003cbr\u003eIssaquah, Washington\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nJohn Krasny is a longtime fire researcher at the National Institute of Standards and Technology (NIST). He is a well-known authority on the flammability of textiles, both in clothing and furnishing applications. He is now retired. \u003cbr\u003e\u003cbr\u003eDr. William Parker has degrees in Physics and Mechanical Engineering and has been a long time researcher with the U.S. Navy and subsequently at NIST. He has specialized in the combustion of wood, in fire endurance, heat release, and development of thermophysical test methods. He is also retired. \u003cbr\u003e\u003cbr\u003eDr. Vytenis Babrauskas was the first person to be awarded a Ph.D. in Fire Protection Engineering from the University of California, Berkeley. He subsequently spent 17 years at NIST developing fire test methods and engineering design methods. He currently heads up his fire safety R\u0026amp;D firm, Fire Science \u0026amp; Technology, Inc. He is the author of the 1992 textbook \"Heat Release in Fires\" and has authored more than 200 papers and reports.\u003cbr\u003e\u003cbr\u003e"}
Fire Retardancy of Pol...
$249.00
{"id":11242254340,"title":"Fire Retardancy of Polymers","handle":"978-0-85404-582-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Eds., M. Le Bras, C. Wilkie, S. Bourbigot \u003cbr\u003eISBN 978-0-85404-582-2 \u003cbr\u003e\u003cbr\u003epages 410, Hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe use of polymers is restricted by their flammability- they may indeed initiate or propagate fire. \u003cstrong\u003eFire Retardancy of Polymers\u003c\/strong\u003e focuses on mineral additives from either micro- or nano-composites for application in fire retardants. With the use of fire retardant additives containing halogen or phosphorus compounds in decline, the need for other systems is evident.\u003cbr\u003e\u003cbr\u003eThe major materials that are used as fire retardant fillers for polymers are alumina trihydrate or magnesium hydroxide, which account for more than 50% by weight of the worldwide sales of fire retardants. Recent works have shown that such halogen-free compounds may give enhanced fire retardancy to polymeric materials when used in low levels, alone, or in the synergistic mixture and that the corresponding fire performances depend on the dispersion of the mineral filler, micrometer-scale dispersion leading to the best performances.\u003cbr\u003e\u003cbr\u003eSpecialists discuss these new applications of mineral fillers with particular emphasis on action mechanisms, new materials including textiles, toxicology, and hazards. With extensive references, this book provides a comprehensive and up-to-date view of these applications and will appeal to professionals, materials scientists, and engineers looking for novel ways to eliminate fire hazards and improve flame retardancy of materials, with a special interest in sustainable development.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:15:28-04:00","created_at":"2017-06-22T21:15:28-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2005","additives","alumina trihydrate","book","dispersion","fillers","fire","flame retardancy","hazards","magnesium hydroxide","mineral filler","p-additives","polymer","polymers","textiles","toxicology"],"price":24900,"price_min":24900,"price_max":24900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378489796,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Fire Retardancy of Polymers","public_title":null,"options":["Default Title"],"price":24900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-85404-582-2","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-85404-582-2.jpg?v=1500216348"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-85404-582-2.jpg?v=1500216348","options":["Title"],"media":[{"alt":null,"id":354807283805,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-85404-582-2.jpg?v=1500216348"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-85404-582-2.jpg?v=1500216348","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Eds., M. Le Bras, C. Wilkie, S. Bourbigot \u003cbr\u003eISBN 978-0-85404-582-2 \u003cbr\u003e\u003cbr\u003epages 410, Hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe use of polymers is restricted by their flammability- they may indeed initiate or propagate fire. \u003cstrong\u003eFire Retardancy of Polymers\u003c\/strong\u003e focuses on mineral additives from either micro- or nano-composites for application in fire retardants. With the use of fire retardant additives containing halogen or phosphorus compounds in decline, the need for other systems is evident.\u003cbr\u003e\u003cbr\u003eThe major materials that are used as fire retardant fillers for polymers are alumina trihydrate or magnesium hydroxide, which account for more than 50% by weight of the worldwide sales of fire retardants. Recent works have shown that such halogen-free compounds may give enhanced fire retardancy to polymeric materials when used in low levels, alone, or in the synergistic mixture and that the corresponding fire performances depend on the dispersion of the mineral filler, micrometer-scale dispersion leading to the best performances.\u003cbr\u003e\u003cbr\u003eSpecialists discuss these new applications of mineral fillers with particular emphasis on action mechanisms, new materials including textiles, toxicology, and hazards. With extensive references, this book provides a comprehensive and up-to-date view of these applications and will appeal to professionals, materials scientists, and engineers looking for novel ways to eliminate fire hazards and improve flame retardancy of materials, with a special interest in sustainable development.\u003cbr\u003e\u003cbr\u003e"}