- Grid List
Filter
Hot Runners in Injecti...
$200.00
{"id":11242213252,"title":"Hot Runners in Injection Moulds","handle":"978-1-85957-208-5","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: D. Frenkler and H. Zawistowski \u003cbr\u003eISBN 978-1-85957-208-5 \u003cbr\u003e\u003cbr\u003epages 354\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe technology of hot runners in plastic moulds is becoming more widely used, and this has been accompanied by an increase in the range of hot runner systems available. This development has meant that in manufacturing practice, the user of hot runner moulds is faced with the problem of how to make an informed comparison between the systems on offer from the mass of technical information at his disposal. The large range of hot runner systems on the market and the complex link between their design and the result obtained in practice means that many designers and users have difficulty in making the best choice. Besides economic and technical considerations, this choice must also take into account the specific properties of the plastics. An understanding of the physical processes taking place in the mould during injection forms a basis for informed mould building and optimum selection of the hot runner system, and for its subsequent operation. This is an aspect to which this book gives special attention. \u003cbr\u003e\u003cbr\u003eThe aim of this book is to give an objective view of the topic based on personal experience. It introduces a logical division of hot runner systems, illustrates the design of nozzles, manifolds, and other system components, discusses the principles of selection, building, installation and use, analyses the causes of faults and suggests ways of eliminating them and presents examples of applications. \u003cbr\u003e\u003cbr\u003eSubjects covered are: \u003cbr\u003e-Types of Hot Runner System \u003cbr\u003e-Conditions for Use of Hot Runners \u003cbr\u003e-Links with Technology \u003cbr\u003e-Structure of a Hot Runner \u003cbr\u003e-Thermal Balance and Temperature Control \u003cbr\u003e-Filling Balance \u003cbr\u003e-Choosing a Hot Runner System \u003cbr\u003e-Special Injection Processes using Hot Runners \u003cbr\u003e-Special Hot Runner Mould Designs \u003cbr\u003e-Use of Moulds with Hot Runners \u003cbr\u003e-Disruptions to the Operation of Hot Runner Moulds and Typical Moulding Defects \u003cbr\u003e-The Way Ahead for Hot Runner Technology \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDaniel Frenkler has nearly 40 years of experience in the plastic and tool industry in Poland and Sweden. His management career in the fields of injection moulding technology, mould making, mould and product design in Poland, and from 1981 specialisation in mould design in Sweden, make him the ideal person to write this book. \u003cbr\u003e\u003cbr\u003eHe is a co-author (with Henryk Zawistowski) of two fundamental mould design handbooks (1971 and 1984). He has published over 50 articles in technical magazines about the design of hot runners and injection moulds. \u003cbr\u003e\u003cbr\u003eHenryk Zawistowski, too, has nearly 40 years of experience in industry and education in Poland. He worked as a mould designer, and from 1970-1977 was a consultant to BASF, in Poland. In 1980 he became a lecturer at the Technical University in Warsaw, where he devised a theory for shaping internal quality features in injection moulded items. \u003cbr\u003e\u003cbr\u003eBased on his industry knowledge and scientific experience, he developed a system of professional training for technicians in the area of injection moulding, mould design and use of injection moulding machines. In 1990 he established an education centre, PLASTECH and a publishing company PLASTECH. Henryk Zawistowski has published widely in the field of injection moulding.\u003cbr\u003e\u003cbr\u003eThe authors: Daniel Frenkler and Henryk Zawistowski, both graduated in mechanical engineering from the Technical University of Warsaw.","published_at":"2017-06-22T21:13:18-04:00","created_at":"2017-06-22T21:13:18-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2001","book","hot runner","injection moulding","injection processes","molding","mould designs","moulding","moulding defects","p-processing","polymer","thermal balance"],"price":20000,"price_min":20000,"price_max":20000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378347780,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Hot Runners in Injection Moulds","public_title":null,"options":["Default Title"],"price":20000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-208-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5.jpg?v=1499478202"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5.jpg?v=1499478202","options":["Title"],"media":[{"alt":null,"id":356430315613,"position":1,"preview_image":{"aspect_ratio":0.701,"height":499,"width":350,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5.jpg?v=1499478202"},"aspect_ratio":0.701,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5.jpg?v=1499478202","width":350}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: D. Frenkler and H. Zawistowski \u003cbr\u003eISBN 978-1-85957-208-5 \u003cbr\u003e\u003cbr\u003epages 354\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe technology of hot runners in plastic moulds is becoming more widely used, and this has been accompanied by an increase in the range of hot runner systems available. This development has meant that in manufacturing practice, the user of hot runner moulds is faced with the problem of how to make an informed comparison between the systems on offer from the mass of technical information at his disposal. The large range of hot runner systems on the market and the complex link between their design and the result obtained in practice means that many designers and users have difficulty in making the best choice. Besides economic and technical considerations, this choice must also take into account the specific properties of the plastics. An understanding of the physical processes taking place in the mould during injection forms a basis for informed mould building and optimum selection of the hot runner system, and for its subsequent operation. This is an aspect to which this book gives special attention. \u003cbr\u003e\u003cbr\u003eThe aim of this book is to give an objective view of the topic based on personal experience. It introduces a logical division of hot runner systems, illustrates the design of nozzles, manifolds, and other system components, discusses the principles of selection, building, installation and use, analyses the causes of faults and suggests ways of eliminating them and presents examples of applications. \u003cbr\u003e\u003cbr\u003eSubjects covered are: \u003cbr\u003e-Types of Hot Runner System \u003cbr\u003e-Conditions for Use of Hot Runners \u003cbr\u003e-Links with Technology \u003cbr\u003e-Structure of a Hot Runner \u003cbr\u003e-Thermal Balance and Temperature Control \u003cbr\u003e-Filling Balance \u003cbr\u003e-Choosing a Hot Runner System \u003cbr\u003e-Special Injection Processes using Hot Runners \u003cbr\u003e-Special Hot Runner Mould Designs \u003cbr\u003e-Use of Moulds with Hot Runners \u003cbr\u003e-Disruptions to the Operation of Hot Runner Moulds and Typical Moulding Defects \u003cbr\u003e-The Way Ahead for Hot Runner Technology \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDaniel Frenkler has nearly 40 years of experience in the plastic and tool industry in Poland and Sweden. His management career in the fields of injection moulding technology, mould making, mould and product design in Poland, and from 1981 specialisation in mould design in Sweden, make him the ideal person to write this book. \u003cbr\u003e\u003cbr\u003eHe is a co-author (with Henryk Zawistowski) of two fundamental mould design handbooks (1971 and 1984). He has published over 50 articles in technical magazines about the design of hot runners and injection moulds. \u003cbr\u003e\u003cbr\u003eHenryk Zawistowski, too, has nearly 40 years of experience in industry and education in Poland. He worked as a mould designer, and from 1970-1977 was a consultant to BASF, in Poland. In 1980 he became a lecturer at the Technical University in Warsaw, where he devised a theory for shaping internal quality features in injection moulded items. \u003cbr\u003e\u003cbr\u003eBased on his industry knowledge and scientific experience, he developed a system of professional training for technicians in the area of injection moulding, mould design and use of injection moulding machines. In 1990 he established an education centre, PLASTECH and a publishing company PLASTECH. Henryk Zawistowski has published widely in the field of injection moulding.\u003cbr\u003e\u003cbr\u003eThe authors: Daniel Frenkler and Henryk Zawistowski, both graduated in mechanical engineering from the Technical University of Warsaw."}
Ichi, ni, san. Adventu...
$35.00
{"id":11242209348,"title":"Ichi, ni, san. Adventures with Japanese numbers","handle":"978-1-895198-42-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Prof. R. Byron Bird and Dr. Reiji Mezaki \u003cbr\u003eISBN 978-1-895198-42-3 \u003cbr\u003e\u003cbr\u003eNumber of pages: 192\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cbr\u003eThis book is about numbers and their use in the enumeration, counting, and calculation in Japanese, in everyday life, in sciences, and in geography. It also provides a gateway to the understanding of the Japanese language, culture, and organization. In addition, the book gives an introduction to Japanese grammar, place names, proverbs, idioms, sayings, and poetry.\u003cbr\u003e\u003cbr\u003eThe authors of the book are Dr. Bird, a professor of chemical engineering from the U.S.A., and a former student from his department, Dr. Mezaki. They have interacted for decades after first meeting in the 1950s. Dr. Mezaki has worked in several areas of applied chemistry and chemical engineering, and Dr. Bird has had the study of technical Japanese as a hobby since 1960.\u003cbr\u003e\u003cbr\u003eThis book is an excellent example of international cooperation that not only brings people together, but inspires them to produce for us this marvelous book, which is a guide for both technical and nontechnical people to learn about the subject of ways of human perceptions that differ from place to place but serve similar needs.\u003cbr\u003e\u003cbr\u003eThe book may be useful for collateral reading in courses in first- and second-year Japanese. Considering the type, composition, and contents of the book, it is difficult to say who does not need it.\u003cbr\u003e\u003cbr\u003eMore information about the book can be found in the \u003ca href=\"http:\/\/chemtec.org\/prodimages\/Ichi-ni-san-Preface.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePreface (pdf)\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003e1. The Japanese Writing System\u003c\/strong\u003e\u003cbr\u003e1.1 Pronunciation of Japanese; Romanization\u003cbr\u003e1.2 Hiragana\u003cbr\u003e1.3 Katakana\u003cbr\u003e1.4 Kanji\u003cbr\u003e\u003cstrong\u003e2. The Numbers and Counting\u003c\/strong\u003e\u003cbr\u003e2.1 Counting from 1 to 10\u003cbr\u003e2.2 Counting from 11 to 100\u003cbr\u003e2.3 Counting from 101 to 1,000\u003cbr\u003e2.4 Counting from 1,001 to 10,000\u003cbr\u003e2.5 Even larger numbers\u003cbr\u003e2.6 Lucky and unlucky numbers\u003cbr\u003e2.7 Numbers in legal documents\u003cbr\u003e2.8 Still other symbols\u003cbr\u003e2.9 Counting on the fingers\u003cbr\u003e2.10 Tallying cups of coffee or soft drinks\u003cbr\u003e2.11 The soroban\u003cbr\u003e\u003cstrong\u003e3. Zero, Fractions, Decimals, etc.\u003c\/strong\u003e\u003cbr\u003e3.1 Decimals and percentages\u003cbr\u003e3.2 Fractions\u003cbr\u003e3.3 Powers, roots, and factorials\u003cbr\u003e3.4 Regular polygons and polyhedrons\u003cbr\u003e\u003cstrong\u003e4. Months, Days, and Hours\u003c\/strong\u003e\u003cbr\u003e4.1 Names of the months\u003cbr\u003e4.2 Days of the month\u003cbr\u003e4.3 Time of day\u003cbr\u003e4.4 Birthdays\u003cbr\u003e\u003cstrong\u003e5. Counters\u003c\/strong\u003e\u003cbr\u003e5.1 “Chinese numbers”\u003cbr\u003e5.2 “Japanese numbers”\u003cbr\u003e\u003cstrong\u003e6. Use of Numbers with Prefixes and Suffixes\u003c\/strong\u003e\u003cbr\u003e6.1 Ordinal numbers\u003cbr\u003e6.2 “Times”\u003cbr\u003e6.3 Equal distribution\u003cbr\u003e6.4 Indefinite numbers\u003cbr\u003e\u003cstrong\u003e7. Words Containing Numbers\u003c\/strong\u003e\u003cbr\u003e7.1 One\u003cbr\u003e7.2 Two\u003cbr\u003e7.3 Three\u003cbr\u003e7.4 Four\u003cbr\u003e7.5 Five\u003cbr\u003e7.6 Six\u003cbr\u003e7.7 Seven\u003cbr\u003e7.8 Eight\u003cbr\u003e7.9 Nine\u003cbr\u003e7.10 Ten\u003cbr\u003e7.11 One hundred\u003cbr\u003e7.12 One thousand\u003cbr\u003e7.13 Ten thousand\u003cbr\u003e7.14 One hundred thousand\u003cbr\u003e7.15 Zero\u003cbr\u003e7.16 One-half \u003cbr\u003e7.17 Miscellaneous\u003cbr\u003e\u003cstrong\u003e8. Numbers in Geography\u003c\/strong\u003e\u003cbr\u003e8.1 Main islands\u003cbr\u003e8.2 Lesser islands\u003cbr\u003e8.3 Prefectures\u003cbr\u003e8.4 Cities\u003cbr\u003e8.5 Towns\u003cbr\u003e8.6 Villages\u003cbr\u003e8.7 Mountains\u003cbr\u003e8.8 Lakes\u003cbr\u003e8.9 Rivers\u003cbr\u003e8.10 Peninsulas\u003cbr\u003e8.11 Stations\u003cbr\u003e\u003cstrong\u003e9. Numbers in Personal Names\u003c\/strong\u003e\u003cbr\u003e9.1 Family names\u003cbr\u003e9.2 Given names (male)\u003cbr\u003e9.3 Given names (female)\u003cbr\u003e\u003cstrong\u003e10. Some Grammatical Points\u003c\/strong\u003e\u003cbr\u003e10.1 Particles\u003cbr\u003e10.2 Verb forms\u003cbr\u003e10.3 Adjective forms\u003cbr\u003e10.4 Ellipses\u003cbr\u003e\u003cstrong\u003e11. Numbers in Proverbs, Idioms, and Sayings: Kotowaza #1 to #68\u003cbr\u003e12. Numbers in Haiku: Haiku #1 to #49\u003cbr\u003e13. Numbers in Tanka: Tanka #1 to # 32\u003cbr\u003e14. Fooling around with Numbers\u003c\/strong\u003e\u003cbr\u003e14.1 Sayings with four characters\u003cbr\u003e14.2 Sayings with N and N\u003cbr\u003e14.3 Sayings with N and (N+1)\u003cbr\u003e14.4 Numbers appearing inside other characters\u003cbr\u003e14.5 Mnemonics for remembering numbers\u003cbr\u003e14.6 Numerical categories \u003cbr\u003e14.7 Comical expressions involving numbers \u003cbr\u003e14.8 Names for vegetables and other edibles\u003cbr\u003e\u003cstrong\u003e15. Writing Kanji\u003c\/strong\u003e \u003cbr\u003eReferences \u003cbr\u003eAppendix: Characters given by their total stroke count\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003eR. BYRON BIRD\u003c\/strong\u003e has been a Professor of Chemical Engineering at the University of Wisconsin-Madison since 1953. He is well known as the senior author of Transport Phenomena, a standard chemical engineering textbook, and the monograph Dynamics of Polymeric Liquids. He has taught twice at the Technical University in Delft in Holland, and has coauthored two Dutch literary readers. In Japan, he has taught at Kyoto and Nagoya Universities, and has coauthored three books on technical Japanese translation. He is a member of the National Academy of Sciences and the National Academy of Engineering, as well as a recipient of the National Medal of Science.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eREIJI MEZAKI\u003c\/strong\u003e received his B.S. in Industrial Chemistry from Kyoto University and his Ph. D. in Chemical Engineering from the University of Wisconsin. After several years of teaching service at Yale University and New York University, he worked for Mitsubishi Chemical Corporation, Mitsubishi Research Institute, and the University of Tokyo as a research staff member in frontier and essential areas of applied chemistry and chemical engineering. They include computer-assisted optimization of chemical processes and database construction of polymers and nanocomposites. Presently he is a visiting researcher at the National Institute of Advanced Industrial Science and Technology.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:13:06-04:00","created_at":"2017-06-22T21:13:06-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2009","book","general","Japan","Japanese","language","numbers"],"price":3500,"price_min":3500,"price_max":5500,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378329796,"title":"Hardcover","option1":"Hardcover","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ichi, ni, san. Adventures with Japanese numbers - Hardcover","public_title":"Hardcover","options":["Hardcover"],"price":5500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-42-3","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":49414383748,"title":"Softcover","option1":"Softcover","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Ichi, ni, san. Adventures with Japanese numbers - Softcover","public_title":"Softcover","options":["Softcover"],"price":3500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-43-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-42-3.jpg?v=1499478359"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-42-3.jpg?v=1499478359","options":["Cover"],"media":[{"alt":null,"id":356437590109,"position":1,"preview_image":{"aspect_ratio":0.614,"height":189,"width":116,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-42-3.jpg?v=1499478359"},"aspect_ratio":0.614,"height":189,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-42-3.jpg?v=1499478359","width":116}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Prof. R. Byron Bird and Dr. Reiji Mezaki \u003cbr\u003eISBN 978-1-895198-42-3 \u003cbr\u003e\u003cbr\u003eNumber of pages: 192\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cbr\u003eThis book is about numbers and their use in the enumeration, counting, and calculation in Japanese, in everyday life, in sciences, and in geography. It also provides a gateway to the understanding of the Japanese language, culture, and organization. In addition, the book gives an introduction to Japanese grammar, place names, proverbs, idioms, sayings, and poetry.\u003cbr\u003e\u003cbr\u003eThe authors of the book are Dr. Bird, a professor of chemical engineering from the U.S.A., and a former student from his department, Dr. Mezaki. They have interacted for decades after first meeting in the 1950s. Dr. Mezaki has worked in several areas of applied chemistry and chemical engineering, and Dr. Bird has had the study of technical Japanese as a hobby since 1960.\u003cbr\u003e\u003cbr\u003eThis book is an excellent example of international cooperation that not only brings people together, but inspires them to produce for us this marvelous book, which is a guide for both technical and nontechnical people to learn about the subject of ways of human perceptions that differ from place to place but serve similar needs.\u003cbr\u003e\u003cbr\u003eThe book may be useful for collateral reading in courses in first- and second-year Japanese. Considering the type, composition, and contents of the book, it is difficult to say who does not need it.\u003cbr\u003e\u003cbr\u003eMore information about the book can be found in the \u003ca href=\"http:\/\/chemtec.org\/prodimages\/Ichi-ni-san-Preface.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePreface (pdf)\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cstrong\u003e1. The Japanese Writing System\u003c\/strong\u003e\u003cbr\u003e1.1 Pronunciation of Japanese; Romanization\u003cbr\u003e1.2 Hiragana\u003cbr\u003e1.3 Katakana\u003cbr\u003e1.4 Kanji\u003cbr\u003e\u003cstrong\u003e2. The Numbers and Counting\u003c\/strong\u003e\u003cbr\u003e2.1 Counting from 1 to 10\u003cbr\u003e2.2 Counting from 11 to 100\u003cbr\u003e2.3 Counting from 101 to 1,000\u003cbr\u003e2.4 Counting from 1,001 to 10,000\u003cbr\u003e2.5 Even larger numbers\u003cbr\u003e2.6 Lucky and unlucky numbers\u003cbr\u003e2.7 Numbers in legal documents\u003cbr\u003e2.8 Still other symbols\u003cbr\u003e2.9 Counting on the fingers\u003cbr\u003e2.10 Tallying cups of coffee or soft drinks\u003cbr\u003e2.11 The soroban\u003cbr\u003e\u003cstrong\u003e3. Zero, Fractions, Decimals, etc.\u003c\/strong\u003e\u003cbr\u003e3.1 Decimals and percentages\u003cbr\u003e3.2 Fractions\u003cbr\u003e3.3 Powers, roots, and factorials\u003cbr\u003e3.4 Regular polygons and polyhedrons\u003cbr\u003e\u003cstrong\u003e4. Months, Days, and Hours\u003c\/strong\u003e\u003cbr\u003e4.1 Names of the months\u003cbr\u003e4.2 Days of the month\u003cbr\u003e4.3 Time of day\u003cbr\u003e4.4 Birthdays\u003cbr\u003e\u003cstrong\u003e5. Counters\u003c\/strong\u003e\u003cbr\u003e5.1 “Chinese numbers”\u003cbr\u003e5.2 “Japanese numbers”\u003cbr\u003e\u003cstrong\u003e6. Use of Numbers with Prefixes and Suffixes\u003c\/strong\u003e\u003cbr\u003e6.1 Ordinal numbers\u003cbr\u003e6.2 “Times”\u003cbr\u003e6.3 Equal distribution\u003cbr\u003e6.4 Indefinite numbers\u003cbr\u003e\u003cstrong\u003e7. Words Containing Numbers\u003c\/strong\u003e\u003cbr\u003e7.1 One\u003cbr\u003e7.2 Two\u003cbr\u003e7.3 Three\u003cbr\u003e7.4 Four\u003cbr\u003e7.5 Five\u003cbr\u003e7.6 Six\u003cbr\u003e7.7 Seven\u003cbr\u003e7.8 Eight\u003cbr\u003e7.9 Nine\u003cbr\u003e7.10 Ten\u003cbr\u003e7.11 One hundred\u003cbr\u003e7.12 One thousand\u003cbr\u003e7.13 Ten thousand\u003cbr\u003e7.14 One hundred thousand\u003cbr\u003e7.15 Zero\u003cbr\u003e7.16 One-half \u003cbr\u003e7.17 Miscellaneous\u003cbr\u003e\u003cstrong\u003e8. Numbers in Geography\u003c\/strong\u003e\u003cbr\u003e8.1 Main islands\u003cbr\u003e8.2 Lesser islands\u003cbr\u003e8.3 Prefectures\u003cbr\u003e8.4 Cities\u003cbr\u003e8.5 Towns\u003cbr\u003e8.6 Villages\u003cbr\u003e8.7 Mountains\u003cbr\u003e8.8 Lakes\u003cbr\u003e8.9 Rivers\u003cbr\u003e8.10 Peninsulas\u003cbr\u003e8.11 Stations\u003cbr\u003e\u003cstrong\u003e9. Numbers in Personal Names\u003c\/strong\u003e\u003cbr\u003e9.1 Family names\u003cbr\u003e9.2 Given names (male)\u003cbr\u003e9.3 Given names (female)\u003cbr\u003e\u003cstrong\u003e10. Some Grammatical Points\u003c\/strong\u003e\u003cbr\u003e10.1 Particles\u003cbr\u003e10.2 Verb forms\u003cbr\u003e10.3 Adjective forms\u003cbr\u003e10.4 Ellipses\u003cbr\u003e\u003cstrong\u003e11. Numbers in Proverbs, Idioms, and Sayings: Kotowaza #1 to #68\u003cbr\u003e12. Numbers in Haiku: Haiku #1 to #49\u003cbr\u003e13. Numbers in Tanka: Tanka #1 to # 32\u003cbr\u003e14. Fooling around with Numbers\u003c\/strong\u003e\u003cbr\u003e14.1 Sayings with four characters\u003cbr\u003e14.2 Sayings with N and N\u003cbr\u003e14.3 Sayings with N and (N+1)\u003cbr\u003e14.4 Numbers appearing inside other characters\u003cbr\u003e14.5 Mnemonics for remembering numbers\u003cbr\u003e14.6 Numerical categories \u003cbr\u003e14.7 Comical expressions involving numbers \u003cbr\u003e14.8 Names for vegetables and other edibles\u003cbr\u003e\u003cstrong\u003e15. Writing Kanji\u003c\/strong\u003e \u003cbr\u003eReferences \u003cbr\u003eAppendix: Characters given by their total stroke count\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003eR. BYRON BIRD\u003c\/strong\u003e has been a Professor of Chemical Engineering at the University of Wisconsin-Madison since 1953. He is well known as the senior author of Transport Phenomena, a standard chemical engineering textbook, and the monograph Dynamics of Polymeric Liquids. He has taught twice at the Technical University in Delft in Holland, and has coauthored two Dutch literary readers. In Japan, he has taught at Kyoto and Nagoya Universities, and has coauthored three books on technical Japanese translation. He is a member of the National Academy of Sciences and the National Academy of Engineering, as well as a recipient of the National Medal of Science.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eREIJI MEZAKI\u003c\/strong\u003e received his B.S. in Industrial Chemistry from Kyoto University and his Ph. D. in Chemical Engineering from the University of Wisconsin. After several years of teaching service at Yale University and New York University, he worked for Mitsubishi Chemical Corporation, Mitsubishi Research Institute, and the University of Tokyo as a research staff member in frontier and essential areas of applied chemistry and chemical engineering. They include computer-assisted optimization of chemical processes and database construction of polymers and nanocomposites. Presently he is a visiting researcher at the National Institute of Advanced Industrial Science and Technology.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
Imaging and Image Anal...
$215.00
{"id":11242232132,"title":"Imaging and Image Analysis Applications for Plastics","handle":"1-884207-81-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Prof. Dr. Behnam Pourdeyhimi \u003cbr\u003eISBN 1-884207-81-2 \u003cbr\u003e\u003cbr\u003e308 pages, 224 figures, 36 tables\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book is of interest for all functions in research, development, new product implementation, production, product engineering in industries which process polymers and plastics. Those who already made use of image analysis in their practice will find useful hints on how to improve and better utilize their methods. Others who did not use these methods so far will find that these inexpensive techniques can provide answers to many important technical problems which are not resolved because just a few years ago these methods were not available or too expensive to apply. Only several years ago, these observations were either not quantified at all or various graphical standards were used for comparison to develop a point scale to assign observed images. This was not precise and confusing. The advent of high-speed digital cameras working with image processing software is changing this situation. The list of some topics included in the book shows the wealth of opportunities. This book presents results of studies in which imaging and image analyses were used to quantify many important determinants of production technology and product performance such as flow and mixing behavior, optimization of equipment configuration and material homogenization, morphology of plastics, size of polymers domains in blends, compatibilization methods and conditions, effects of grafting, reasons for surface roughness, scratch and mar resistance, fiber orientation, improved barrier properties, improved magnetic permeability, improved mechanical properties, distribution of voids in laminates, determination of cell sizes in cellular plastics, formation of crazes during fatigue, fiber radius determination during spinning, blister formation and adhesion, effects of glass fiber orientation on weld strength, analysis of welding process, dispersion of agglomerates formed by additives and the effect of mixing and transport conditions, formation of gels and impurities, particles structure and distribution, rate of crystallization, and many others. Having numerical data it is possible to optimize the processes to increase output, decrease a reject rate, save materials, and improve product properties.\u003cbr\u003eConsidering that every product must appeal to a customer and perform under conditions of its use, these studies are the most important for optimizing numerous conflicting properties. For example in one research, product performance is combined with high output rate and requirement of low weight. The potential applications of image analysis allow following these interrelations to optimize a product which is why research and production are eager to apply this emerging technology. The number of research reports on this subject is systematically growing. The methods of observation, such as various forms of microscopy, tracers, and lasers, are simple and in most cases available in most facilities.\u003cbr\u003e\u003cbr\u003eThe book contains references to various applications already in use, methods of image capture, data processing, hardware and software required. The examples of processes discussed include: extrusion, extruding reactors, injection molding, impregnation, foam production, film manufacture, compression molding, vulcanization, melt spinning, reactive blending, welding, blow molding, conveying, composite manufacture, compounding, and thermosetting. The examples of studies and improvements include: increased homogeneity of dye, pigment and filler mixing, improved fiber orientation, increased tooth stiffness in composite gears, the rate of spherulites growth, optimization of screw configuration, increased miscibility in polymer blends, study of polymer crystallization rate, melt flow analysis, void content, particle size in polymer blends, pore size and shape in foams, cell density in foams, modifier dispersion, improvement of bidirectional properties, effect of low molecular additives on morphology, interparticle distance, effect of mixing conditions and geometry on morphology, crack formation during fatigue testing, mechanism of crazing, chemical resistance, oil penetration, kinetic measurement of fiber diameter, stress profile, quantified flow visualization, effect of compatibilization, domain distribution, correlation of morphology with mechanical performance, analysis of melt fracture aids, surface roughness, droplet\/fiber transition, barrier properties, effect of orientation on electric conductivity, peel adhesion, fiber length after processing, fractal dimension, nucleation, thermography, thermal imaging, failure analysis, agglomerate dispersion, and impurity monitoring. The large variety of processing methods, possible studies and improvements show that this book is of interest to the entire cross-section of plastic manufacturing industry. It offers data which not only allow to better understand materials and processing methods but the book helps in process optimization and development of processes having higher throughput and superior performance.\u003cbr\u003eThis book is about the design and processing of various materials rather than algorithms and design of image analysis equipment. But by showing actual research and data in a form familiar to any technologist in the plastics industry, it demonstrates benefits and capabilities of the methods.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e• The Optimized Performance of Linear Vibration Welded Nylon 6 and Nylon 66 Butt Joints\u003cbr\u003e• Image Analysis of Polypropylene Melt Fiber Stretching\u003cbr\u003e• The Effect of Fiber Orientation on Distribution on the Tooth Stiffness of a Polymer Composite Gear\u003cbr\u003e• Novel Processing and Performance of Aligned Discontinuous Fiber Polymer Composites\u003cbr\u003e• Characterization of Kneading Block Performance on Co-Rotating Twin Screw Extruders\u003cbr\u003e• A Quantitative Description of the Effects of Molecular Weight and Atactic Level on the Spherulite Growth Rate of Ziegler-Natta Isotactic Polypropylene\u003cbr\u003e• Miscibility and Co-Continuous Morphology of Polypropylene-Polyethylene Blends\u003cbr\u003e• Flow Visualization for Extensional Viscosity Assessment\u003cbr\u003e• PP\/LLDPE\/EDPM Blends: Effect of Elastomer Viscosity on Impact\u003cbr\u003e• Mixing of a Low Molecular Weight Additive in a Co-Rotating TSE: Morphological Analysis of a HDPE\/PDMS Systems\u003cbr\u003e• The in situ Compatibilization of HDPE\/PET Blends\u003cbr\u003e• Evaluation of Process Aids for Controlling Surface Roughness of Extruded LLDPE\u003cbr\u003e• Evaluation of Scratch and Mar Resistance in Automotive Coatings: Nanoscratching by Atomic Force Microscope\u003cbr\u003e• Study of the Morphology and Tensile Mechanical Properties of Biaxially Oriented PET\/PP Blends\u003cbr\u003e• Improved Barrier and Mechanical Properties of Laminar Polymer Blends\u003cbr\u003e• Relative Magnetic Permeability of Injection Molded Composites as Affected by the Flow Induced Orientation of Ferromagnetic Particles\u003cbr\u003e• Processing-Structure-Property Relations in PS\/PE Blends: Compression versus Injection Molding\u003cbr\u003e• Polyetherimide Epoxy-Based Prepreg Systems with Variable Temperature Cure Capability\u003cbr\u003e• CO 2 Blown PETG Foams\u003cbr\u003e• Tear Strength Enhancement Mechanisms in TPO Films\u003cbr\u003e• Morphological Study of Fatigue Induced Damage in Semicrystalline Polymers\u003cbr\u003e• The Effect of Several Kinds of Oils on the Oil Resistance Behavior of Polystyrenic Thermoplastic Vulcanizate\u003cbr\u003e• Visualization of Polymer Melt Convergent Flows in Extrusion\u003cbr\u003e• Evaluation of the Constrained Blister Test for Measurement of an Intrinsic Adhesion\u003cbr\u003e• Fractal Analysis and Radiographic Inspection of Microwave Welded HDPE Bars\u003cbr\u003e• Application of Thermography for the Optimization of the Blow Molding Process\u003cbr\u003e• The Use of Video and the Development of Solids Conveying Theory\u003cbr\u003e• Microcellular PET Foams Produced by the Solid State Process\u003cbr\u003e• Thermal Wave Imaging of Propagating Cracks in Polypropylene and a Thermoplastic Olefin\u003cbr\u003e• The Division of Agglomerates in Molten Environment of Polymers: A Physical Model for Mathematical Description\u003cbr\u003e• A New On-Line Technique for Morphology Analysis and Residence Time Measurement in a Twin-Screw Extruder\u003cbr\u003e• Controlled Order Thermosets for Electronic Packaging\u003cbr\u003e• Fatigue Fracture in Polypropylene with Different Spherulitic Sizes\u003cbr\u003e• Brittle-Ductile Transition of PP\/Rubber\/Filler Hybrids\u003cbr\u003e• Index\u003c\/p\u003e","published_at":"2017-06-22T21:14:19-04:00","created_at":"2017-06-22T21:14:19-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["1999","agglomerates","automotive","blister test","book","coatings","composite gears","cracks","crystallization rate","environment","fatigue","fibers","foams","imaging","increased miscibility polymer blends","LLDPE","magnetic permeability","Mar resistance","melt flow analysis","morphology","optimization screw configuration","p-testing","particle size","PET\/PP","polymer","polymer blends","PS\/PE","rate spherulites growth","scratch","semicrystalline","tear strength","tensile"],"price":21500,"price_min":21500,"price_max":21500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378412420,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Imaging and Image Analysis Applications for Plastics","public_title":null,"options":["Default Title"],"price":21500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"1-884207-81-2","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/1-884207-81-2.jpg?v=1499725805"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/1-884207-81-2.jpg?v=1499725805","options":["Title"],"media":[{"alt":null,"id":356441260125,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/1-884207-81-2.jpg?v=1499725805"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/1-884207-81-2.jpg?v=1499725805","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Prof. Dr. Behnam Pourdeyhimi \u003cbr\u003eISBN 1-884207-81-2 \u003cbr\u003e\u003cbr\u003e308 pages, 224 figures, 36 tables\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book is of interest for all functions in research, development, new product implementation, production, product engineering in industries which process polymers and plastics. Those who already made use of image analysis in their practice will find useful hints on how to improve and better utilize their methods. Others who did not use these methods so far will find that these inexpensive techniques can provide answers to many important technical problems which are not resolved because just a few years ago these methods were not available or too expensive to apply. Only several years ago, these observations were either not quantified at all or various graphical standards were used for comparison to develop a point scale to assign observed images. This was not precise and confusing. The advent of high-speed digital cameras working with image processing software is changing this situation. The list of some topics included in the book shows the wealth of opportunities. This book presents results of studies in which imaging and image analyses were used to quantify many important determinants of production technology and product performance such as flow and mixing behavior, optimization of equipment configuration and material homogenization, morphology of plastics, size of polymers domains in blends, compatibilization methods and conditions, effects of grafting, reasons for surface roughness, scratch and mar resistance, fiber orientation, improved barrier properties, improved magnetic permeability, improved mechanical properties, distribution of voids in laminates, determination of cell sizes in cellular plastics, formation of crazes during fatigue, fiber radius determination during spinning, blister formation and adhesion, effects of glass fiber orientation on weld strength, analysis of welding process, dispersion of agglomerates formed by additives and the effect of mixing and transport conditions, formation of gels and impurities, particles structure and distribution, rate of crystallization, and many others. Having numerical data it is possible to optimize the processes to increase output, decrease a reject rate, save materials, and improve product properties.\u003cbr\u003eConsidering that every product must appeal to a customer and perform under conditions of its use, these studies are the most important for optimizing numerous conflicting properties. For example in one research, product performance is combined with high output rate and requirement of low weight. The potential applications of image analysis allow following these interrelations to optimize a product which is why research and production are eager to apply this emerging technology. The number of research reports on this subject is systematically growing. The methods of observation, such as various forms of microscopy, tracers, and lasers, are simple and in most cases available in most facilities.\u003cbr\u003e\u003cbr\u003eThe book contains references to various applications already in use, methods of image capture, data processing, hardware and software required. The examples of processes discussed include: extrusion, extruding reactors, injection molding, impregnation, foam production, film manufacture, compression molding, vulcanization, melt spinning, reactive blending, welding, blow molding, conveying, composite manufacture, compounding, and thermosetting. The examples of studies and improvements include: increased homogeneity of dye, pigment and filler mixing, improved fiber orientation, increased tooth stiffness in composite gears, the rate of spherulites growth, optimization of screw configuration, increased miscibility in polymer blends, study of polymer crystallization rate, melt flow analysis, void content, particle size in polymer blends, pore size and shape in foams, cell density in foams, modifier dispersion, improvement of bidirectional properties, effect of low molecular additives on morphology, interparticle distance, effect of mixing conditions and geometry on morphology, crack formation during fatigue testing, mechanism of crazing, chemical resistance, oil penetration, kinetic measurement of fiber diameter, stress profile, quantified flow visualization, effect of compatibilization, domain distribution, correlation of morphology with mechanical performance, analysis of melt fracture aids, surface roughness, droplet\/fiber transition, barrier properties, effect of orientation on electric conductivity, peel adhesion, fiber length after processing, fractal dimension, nucleation, thermography, thermal imaging, failure analysis, agglomerate dispersion, and impurity monitoring. The large variety of processing methods, possible studies and improvements show that this book is of interest to the entire cross-section of plastic manufacturing industry. It offers data which not only allow to better understand materials and processing methods but the book helps in process optimization and development of processes having higher throughput and superior performance.\u003cbr\u003eThis book is about the design and processing of various materials rather than algorithms and design of image analysis equipment. But by showing actual research and data in a form familiar to any technologist in the plastics industry, it demonstrates benefits and capabilities of the methods.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003e• The Optimized Performance of Linear Vibration Welded Nylon 6 and Nylon 66 Butt Joints\u003cbr\u003e• Image Analysis of Polypropylene Melt Fiber Stretching\u003cbr\u003e• The Effect of Fiber Orientation on Distribution on the Tooth Stiffness of a Polymer Composite Gear\u003cbr\u003e• Novel Processing and Performance of Aligned Discontinuous Fiber Polymer Composites\u003cbr\u003e• Characterization of Kneading Block Performance on Co-Rotating Twin Screw Extruders\u003cbr\u003e• A Quantitative Description of the Effects of Molecular Weight and Atactic Level on the Spherulite Growth Rate of Ziegler-Natta Isotactic Polypropylene\u003cbr\u003e• Miscibility and Co-Continuous Morphology of Polypropylene-Polyethylene Blends\u003cbr\u003e• Flow Visualization for Extensional Viscosity Assessment\u003cbr\u003e• PP\/LLDPE\/EDPM Blends: Effect of Elastomer Viscosity on Impact\u003cbr\u003e• Mixing of a Low Molecular Weight Additive in a Co-Rotating TSE: Morphological Analysis of a HDPE\/PDMS Systems\u003cbr\u003e• The in situ Compatibilization of HDPE\/PET Blends\u003cbr\u003e• Evaluation of Process Aids for Controlling Surface Roughness of Extruded LLDPE\u003cbr\u003e• Evaluation of Scratch and Mar Resistance in Automotive Coatings: Nanoscratching by Atomic Force Microscope\u003cbr\u003e• Study of the Morphology and Tensile Mechanical Properties of Biaxially Oriented PET\/PP Blends\u003cbr\u003e• Improved Barrier and Mechanical Properties of Laminar Polymer Blends\u003cbr\u003e• Relative Magnetic Permeability of Injection Molded Composites as Affected by the Flow Induced Orientation of Ferromagnetic Particles\u003cbr\u003e• Processing-Structure-Property Relations in PS\/PE Blends: Compression versus Injection Molding\u003cbr\u003e• Polyetherimide Epoxy-Based Prepreg Systems with Variable Temperature Cure Capability\u003cbr\u003e• CO 2 Blown PETG Foams\u003cbr\u003e• Tear Strength Enhancement Mechanisms in TPO Films\u003cbr\u003e• Morphological Study of Fatigue Induced Damage in Semicrystalline Polymers\u003cbr\u003e• The Effect of Several Kinds of Oils on the Oil Resistance Behavior of Polystyrenic Thermoplastic Vulcanizate\u003cbr\u003e• Visualization of Polymer Melt Convergent Flows in Extrusion\u003cbr\u003e• Evaluation of the Constrained Blister Test for Measurement of an Intrinsic Adhesion\u003cbr\u003e• Fractal Analysis and Radiographic Inspection of Microwave Welded HDPE Bars\u003cbr\u003e• Application of Thermography for the Optimization of the Blow Molding Process\u003cbr\u003e• The Use of Video and the Development of Solids Conveying Theory\u003cbr\u003e• Microcellular PET Foams Produced by the Solid State Process\u003cbr\u003e• Thermal Wave Imaging of Propagating Cracks in Polypropylene and a Thermoplastic Olefin\u003cbr\u003e• The Division of Agglomerates in Molten Environment of Polymers: A Physical Model for Mathematical Description\u003cbr\u003e• A New On-Line Technique for Morphology Analysis and Residence Time Measurement in a Twin-Screw Extruder\u003cbr\u003e• Controlled Order Thermosets for Electronic Packaging\u003cbr\u003e• Fatigue Fracture in Polypropylene with Different Spherulitic Sizes\u003cbr\u003e• Brittle-Ductile Transition of PP\/Rubber\/Filler Hybrids\u003cbr\u003e• Index\u003c\/p\u003e"}
In-Mould Decoration of...
$144.00
{"id":11242211652,"title":"In-Mould Decoration of Plastics","handle":"978-1-85957-328-0","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: J.C. Love and V. Goodship, The University of Warwick \u003cbr\u003eISBN 978-1-85957-328-0 \u003cbr\u003e\u003cbr\u003epages: 122, figures: 7, table: 1\n\u003ch5\u003eSummary\u003c\/h5\u003e\nMany plastic components need to have a surface finish applied before use. This can act as a decorative layer, a protective layer, to smooth out surface defects, or to alter surface properties (for example, to enhance adhesion). If this surface effect is applied during the moulding process, it can reduce time, space, material and machinery requirements. It also allows processors to supply complete systems, rather than just moulded components. In-mould decoration techniques include the in-mould application of film, in-mould priming, in-mould labeling and the injection of paints into the mould. \u003cbr\u003e\u003cbr\u003eIn-mould decoration generally requires additional equipment, which can be expensive. The design is also critical for success. These factors need to be taken into consideration in corporate planning. \u003cbr\u003e\u003cbr\u003eIn-mould films are prepared by multi-layer extrusion or solvent casting. They can be a single colour or highly patterned with detailed graphics. They are stretched across a mould prior to injection, compression or blow moulding to produce a variety of decorative effects. This technique allows for great design flexibility and permits increased customer personalisation of products such as cars and mobile phones. Changing design between moulds is as simple as changing a roll of film. Film preparation is also discussed in this review. \u003cbr\u003e\u003cbr\u003eCoatings comprising thermoplastic, pseudo-thermoplastic and uncured thermosetting materials can be injected or extruded into a mould. Here they act as paints in compression injection moulding and co-injection moulding. An additional benefit is that in-mould painting can reduce the release of volatile organic compounds (VOCs) into the atmosphere, which is a common problem in paint shops. \u003cbr\u003e\u003cbr\u003eIn-mould labeling can eliminate the requirement for adhesive. In the first example of this practice, paper labels for ice cream container lids were inserted into the mould prior to injection. Labels can also be applied as a film and made from the same plastic material as the component to facilitate bonding and create a continuous surface effect, i.e., the label becomes an integral part of the product. \u003cbr\u003e\u003cbr\u003eThese techniques have widespread use in the plastics industry and the marketplace is expanding. The car and mobile phone industries, packaging and toys are examples of key areas for growth. \u003cbr\u003e\u003cbr\u003eMany new developments are taking place in this field. The indexed summaries of papers from the polymer library that are included with this review include a number of key patents. This reference section also provides a good indicator of the key companies involved in this area and the current applications of this technology. \u003cbr\u003e\u003cbr\u003eThe emphasis of this review is on practical applications of the techniques of in-mould decoration including advantages and disadvantages. This book provides an excellent source of information about a developing area of moulding, which will allow processors to add value to products and compete in the marketplace.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction \u003cbr\u003e\u003cbr\u003e2. The Popularity of In-Mould Decoration \u003cbr\u003e2.1 Customer Requirement \u003cbr\u003e2.2 Costs \u003cbr\u003e2.3 Environmental Legislation \u003cbr\u003e2.4 A Strategic Decision \u003cbr\u003e\u003cbr\u003e3. In-Mould Film Technologies \u003cbr\u003e3.1 In-Mould Labelling \u003cbr\u003e3.2 In-Mould Paint Films \u003cbr\u003e3.2.1 The Structure of In-Mould Paint Films \u003cbr\u003e3.2.2 Manufacturing Options \u003cbr\u003e3.2.3 The Application of Paint Films in Moulding \u003cbr\u003e3.2.4 Benefits of Using In-Mould Paint Films \u003cbr\u003e3.2.5 Limitations of Using In-Mould Paint Films \u003cbr\u003e3.3 In-Mould Textiles \u003cbr\u003e3.4 In-Mould Decorating \u003cbr\u003e\u003cbr\u003e4. Injection In-Mould Painting \u003cbr\u003e4.1 Introduction \u003cbr\u003e4.2 Paint Formulations \u003cbr\u003e4.2.1 The Base Plastics \u003cbr\u003e4.3 Adhesion Technologies \u003cbr\u003e4.3.1 Compatible Materials \u003cbr\u003e4.3.2 Encapsulation \u003cbr\u003e4.3.3 Chemical Compatibilisation \u003cbr\u003e4.4 Application Methods for Injection In-Mould Painting \u003cbr\u003e4.4.1 Compression Injection Moulding \u003cbr\u003e4.4.2 Simultaneous Co-Injection Moulding: Granular Injected Paint Technology (GIPT) \u003cbr\u003e4.4.3 Moulded In Paint \u003cbr\u003e4.4.4 FINIMOL \u003cbr\u003e\u003cbr\u003e5. On-Mould Painting \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Coating Formulation \u003cbr\u003e5.3 Application Methods \u003cbr\u003e5.4 The Advantages and Limitations of On-Mould Painting \u003cbr\u003e\u003cbr\u003e6. In-Mould Primer \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 In-Mould Priming of PP Using Simultaneous Co-Injection Moulding \u003cbr\u003e6.3 In-Mould Priming of Composites \u003cbr\u003e\u003cbr\u003e7. Conclusions \u003cbr\u003eAdditional References \u003cbr\u003eAbbreviations and Acronyms \u003cbr\u003eAbstracts from the Polymer Library Databases \u003cbr\u003eSubject Index\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAs a materials engineer, Jo Love has been researching in-mould decorating for five years. She is an expert in the development and use of the Granular Injected Paint Technology (GIPT) and has published papers and taught the principles of in-mould decorating internationally. Dr. Goodship is a Senior Research Fellow with 14 years experience in industry and expertise in co-injection moulding technology. The authors are based at the Warwick Manufacturing Group in the Advanced Technology Centre at the University of Warwick, which has strong links to the automotive sector.","published_at":"2017-06-22T21:13:13-04:00","created_at":"2017-06-22T21:13:13-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","adhesion","book","coating","film","injection molding","injection moulding","labelling","mold","molding","mould","moulding","p-processing","paint","plastics","poly","textiles"],"price":14400,"price_min":14400,"price_max":14400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378336580,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"In-Mould Decoration of Plastics","public_title":null,"options":["Default Title"],"price":14400,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-328-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-328-0.jpg?v=1499478528"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-328-0.jpg?v=1499478528","options":["Title"],"media":[{"alt":null,"id":356444504157,"position":1,"preview_image":{"aspect_ratio":0.804,"height":500,"width":402,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-328-0.jpg?v=1499478528"},"aspect_ratio":0.804,"height":500,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-328-0.jpg?v=1499478528","width":402}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: J.C. Love and V. Goodship, The University of Warwick \u003cbr\u003eISBN 978-1-85957-328-0 \u003cbr\u003e\u003cbr\u003epages: 122, figures: 7, table: 1\n\u003ch5\u003eSummary\u003c\/h5\u003e\nMany plastic components need to have a surface finish applied before use. This can act as a decorative layer, a protective layer, to smooth out surface defects, or to alter surface properties (for example, to enhance adhesion). If this surface effect is applied during the moulding process, it can reduce time, space, material and machinery requirements. It also allows processors to supply complete systems, rather than just moulded components. In-mould decoration techniques include the in-mould application of film, in-mould priming, in-mould labeling and the injection of paints into the mould. \u003cbr\u003e\u003cbr\u003eIn-mould decoration generally requires additional equipment, which can be expensive. The design is also critical for success. These factors need to be taken into consideration in corporate planning. \u003cbr\u003e\u003cbr\u003eIn-mould films are prepared by multi-layer extrusion or solvent casting. They can be a single colour or highly patterned with detailed graphics. They are stretched across a mould prior to injection, compression or blow moulding to produce a variety of decorative effects. This technique allows for great design flexibility and permits increased customer personalisation of products such as cars and mobile phones. Changing design between moulds is as simple as changing a roll of film. Film preparation is also discussed in this review. \u003cbr\u003e\u003cbr\u003eCoatings comprising thermoplastic, pseudo-thermoplastic and uncured thermosetting materials can be injected or extruded into a mould. Here they act as paints in compression injection moulding and co-injection moulding. An additional benefit is that in-mould painting can reduce the release of volatile organic compounds (VOCs) into the atmosphere, which is a common problem in paint shops. \u003cbr\u003e\u003cbr\u003eIn-mould labeling can eliminate the requirement for adhesive. In the first example of this practice, paper labels for ice cream container lids were inserted into the mould prior to injection. Labels can also be applied as a film and made from the same plastic material as the component to facilitate bonding and create a continuous surface effect, i.e., the label becomes an integral part of the product. \u003cbr\u003e\u003cbr\u003eThese techniques have widespread use in the plastics industry and the marketplace is expanding. The car and mobile phone industries, packaging and toys are examples of key areas for growth. \u003cbr\u003e\u003cbr\u003eMany new developments are taking place in this field. The indexed summaries of papers from the polymer library that are included with this review include a number of key patents. This reference section also provides a good indicator of the key companies involved in this area and the current applications of this technology. \u003cbr\u003e\u003cbr\u003eThe emphasis of this review is on practical applications of the techniques of in-mould decoration including advantages and disadvantages. This book provides an excellent source of information about a developing area of moulding, which will allow processors to add value to products and compete in the marketplace.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction \u003cbr\u003e\u003cbr\u003e2. The Popularity of In-Mould Decoration \u003cbr\u003e2.1 Customer Requirement \u003cbr\u003e2.2 Costs \u003cbr\u003e2.3 Environmental Legislation \u003cbr\u003e2.4 A Strategic Decision \u003cbr\u003e\u003cbr\u003e3. In-Mould Film Technologies \u003cbr\u003e3.1 In-Mould Labelling \u003cbr\u003e3.2 In-Mould Paint Films \u003cbr\u003e3.2.1 The Structure of In-Mould Paint Films \u003cbr\u003e3.2.2 Manufacturing Options \u003cbr\u003e3.2.3 The Application of Paint Films in Moulding \u003cbr\u003e3.2.4 Benefits of Using In-Mould Paint Films \u003cbr\u003e3.2.5 Limitations of Using In-Mould Paint Films \u003cbr\u003e3.3 In-Mould Textiles \u003cbr\u003e3.4 In-Mould Decorating \u003cbr\u003e\u003cbr\u003e4. Injection In-Mould Painting \u003cbr\u003e4.1 Introduction \u003cbr\u003e4.2 Paint Formulations \u003cbr\u003e4.2.1 The Base Plastics \u003cbr\u003e4.3 Adhesion Technologies \u003cbr\u003e4.3.1 Compatible Materials \u003cbr\u003e4.3.2 Encapsulation \u003cbr\u003e4.3.3 Chemical Compatibilisation \u003cbr\u003e4.4 Application Methods for Injection In-Mould Painting \u003cbr\u003e4.4.1 Compression Injection Moulding \u003cbr\u003e4.4.2 Simultaneous Co-Injection Moulding: Granular Injected Paint Technology (GIPT) \u003cbr\u003e4.4.3 Moulded In Paint \u003cbr\u003e4.4.4 FINIMOL \u003cbr\u003e\u003cbr\u003e5. On-Mould Painting \u003cbr\u003e5.1 Introduction \u003cbr\u003e5.2 Coating Formulation \u003cbr\u003e5.3 Application Methods \u003cbr\u003e5.4 The Advantages and Limitations of On-Mould Painting \u003cbr\u003e\u003cbr\u003e6. In-Mould Primer \u003cbr\u003e6.1 Introduction \u003cbr\u003e6.2 In-Mould Priming of PP Using Simultaneous Co-Injection Moulding \u003cbr\u003e6.3 In-Mould Priming of Composites \u003cbr\u003e\u003cbr\u003e7. Conclusions \u003cbr\u003eAdditional References \u003cbr\u003eAbbreviations and Acronyms \u003cbr\u003eAbstracts from the Polymer Library Databases \u003cbr\u003eSubject Index\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nAs a materials engineer, Jo Love has been researching in-mould decorating for five years. She is an expert in the development and use of the Granular Injected Paint Technology (GIPT) and has published papers and taught the principles of in-mould decorating internationally. Dr. Goodship is a Senior Research Fellow with 14 years experience in industry and expertise in co-injection moulding technology. The authors are based at the Warwick Manufacturing Group in the Advanced Technology Centre at the University of Warwick, which has strong links to the automotive sector."}
Indirect Food Additive...
$253.00
{"id":11242246660,"title":"Indirect Food Additives and Polymers","handle":"978-1-56670-499-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Victor O. Sheftel \u003cbr\u003eISBN 978-1-56670-499-1 \u003cbr\u003e\u003cbr\u003e1,320 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cbr\u003eNow, more than ever, foods come packaged in containers designed for direct cooking or heating, which often causes the movement of substances - indirect additives - into foods. Because of their unique characteristics, plastics or polymeric materials (PM) have become the most important packaging material for food products. The safety assessment of plastics intended for use in contact with foodstuffs or drinking water continues to present a serious challenge.\u003cbr\u003e\u003cbr\u003eIndirect Food Additives and Polymers: Migration and Toxicology studies the potential hazards of indirect additives for human health and develops recommendations for their safe manufacture and use. It contains an impressive review of basic regulatory, toxicological, and other scientific information necessary to identify, characterize, measure, and predict the hazards of nearly 2,000 plastic-like materials employed in packaging. The author presents the data underlying federal regulations - previously unavailable a single volume.\u003cbr\u003e\u003cbr\u003eThe entry for each chemical provides:\u003cbr\u003e\u003cbr\u003ePrime Name\u003cbr\u003e\u003cbr\u003eMolecular or Structural Formula\u003cbr\u003e\u003cbr\u003eMolecular Mass\u003cbr\u003e\u003cbr\u003eSynonyms\u003cbr\u003e\u003cbr\u003eCAS Number\u003cbr\u003e\u003cbr\u003eRTECS number\u003cbr\u003e\u003cbr\u003eProperties\u003cbr\u003e\u003cbr\u003eApplication and Exposure\u003cbr\u003e\u003cbr\u003eMigration Data\u003cbr\u003e\u003cbr\u003eAcute Toxicity\u003cbr\u003e\u003cbr\u003eRepeated Exposure\u003cbr\u003e\u003cbr\u003eShort-Term Toxicity\u003cbr\u003e\u003cbr\u003eLong-Term Toxicity\u003cbr\u003e\u003cbr\u003eImmunotoxicity of Allergenic Effect\u003cbr\u003e\u003cbr\u003eReproductive Toxicity\u003cbr\u003e\u003cbr\u003eMutagenicity\u003cbr\u003e\u003cbr\u003eCarcinogenicity\u003cbr\u003e\u003cbr\u003eChemobiokinetics\u003cbr\u003e\u003cbr\u003eStandards\u003cbr\u003e\u003cbr\u003eGuidelines\u003cbr\u003e\u003cbr\u003eRegulations\u003cbr\u003e\u003cbr\u003eRecommendations\u003cbr\u003e\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003eInternational in scope, the Handbook of Indirect Polymeric Additives in Food and Water: Migration and Toxicology offer comprehensive data on the toxic effects of polymeric materials and their ingredients. You will find the most information on plastics and polymeric materials- their migration and toxicology - in this resource.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nIntroduction\u003cbr\u003eMonomers\u003cbr\u003ePlasticizers\u003cbr\u003eStabilizers\u003cbr\u003eCatalysts, Initiators, Curing and Cross-Linking Agents\u003cbr\u003eRubber Ingredients\u003cbr\u003eSolvents\u003cbr\u003eOther Additives\u003cbr\u003ePolymers\u003cbr\u003eIndex","published_at":"2017-06-22T21:15:03-04:00","created_at":"2017-06-22T21:15:03-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2000","additives","additives migration to food","book","food packaging","material","migration","plastics packaging materials for food","regulations","regulations for food packaging","toxicity"],"price":25300,"price_min":25300,"price_max":25300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378458116,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Indirect Food Additives and Polymers","public_title":null,"options":["Default Title"],"price":25300,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-56670-499-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-56670-499-1.jpg?v=1499478604"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-56670-499-1.jpg?v=1499478604","options":["Title"],"media":[{"alt":null,"id":356446732381,"position":1,"preview_image":{"aspect_ratio":0.673,"height":499,"width":336,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-56670-499-1.jpg?v=1499478604"},"aspect_ratio":0.673,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-56670-499-1.jpg?v=1499478604","width":336}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Victor O. Sheftel \u003cbr\u003eISBN 978-1-56670-499-1 \u003cbr\u003e\u003cbr\u003e1,320 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cbr\u003eNow, more than ever, foods come packaged in containers designed for direct cooking or heating, which often causes the movement of substances - indirect additives - into foods. Because of their unique characteristics, plastics or polymeric materials (PM) have become the most important packaging material for food products. The safety assessment of plastics intended for use in contact with foodstuffs or drinking water continues to present a serious challenge.\u003cbr\u003e\u003cbr\u003eIndirect Food Additives and Polymers: Migration and Toxicology studies the potential hazards of indirect additives for human health and develops recommendations for their safe manufacture and use. It contains an impressive review of basic regulatory, toxicological, and other scientific information necessary to identify, characterize, measure, and predict the hazards of nearly 2,000 plastic-like materials employed in packaging. The author presents the data underlying federal regulations - previously unavailable a single volume.\u003cbr\u003e\u003cbr\u003eThe entry for each chemical provides:\u003cbr\u003e\u003cbr\u003ePrime Name\u003cbr\u003e\u003cbr\u003eMolecular or Structural Formula\u003cbr\u003e\u003cbr\u003eMolecular Mass\u003cbr\u003e\u003cbr\u003eSynonyms\u003cbr\u003e\u003cbr\u003eCAS Number\u003cbr\u003e\u003cbr\u003eRTECS number\u003cbr\u003e\u003cbr\u003eProperties\u003cbr\u003e\u003cbr\u003eApplication and Exposure\u003cbr\u003e\u003cbr\u003eMigration Data\u003cbr\u003e\u003cbr\u003eAcute Toxicity\u003cbr\u003e\u003cbr\u003eRepeated Exposure\u003cbr\u003e\u003cbr\u003eShort-Term Toxicity\u003cbr\u003e\u003cbr\u003eLong-Term Toxicity\u003cbr\u003e\u003cbr\u003eImmunotoxicity of Allergenic Effect\u003cbr\u003e\u003cbr\u003eReproductive Toxicity\u003cbr\u003e\u003cbr\u003eMutagenicity\u003cbr\u003e\u003cbr\u003eCarcinogenicity\u003cbr\u003e\u003cbr\u003eChemobiokinetics\u003cbr\u003e\u003cbr\u003eStandards\u003cbr\u003e\u003cbr\u003eGuidelines\u003cbr\u003e\u003cbr\u003eRegulations\u003cbr\u003e\u003cbr\u003eRecommendations\u003cbr\u003e\u003cbr\u003eReferences\u003cbr\u003e\u003cbr\u003eInternational in scope, the Handbook of Indirect Polymeric Additives in Food and Water: Migration and Toxicology offer comprehensive data on the toxic effects of polymeric materials and their ingredients. You will find the most information on plastics and polymeric materials- their migration and toxicology - in this resource.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nIntroduction\u003cbr\u003eMonomers\u003cbr\u003ePlasticizers\u003cbr\u003eStabilizers\u003cbr\u003eCatalysts, Initiators, Curing and Cross-Linking Agents\u003cbr\u003eRubber Ingredients\u003cbr\u003eSolvents\u003cbr\u003eOther Additives\u003cbr\u003ePolymers\u003cbr\u003eIndex"}
Industrial Biofouling
$260.00
{"id":11242241988,"title":"Industrial Biofouling","handle":"978-0-444-53224-4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: T. Reg Bott, School of Chemical Engineering, the University of Birmingham, Edgbaston, UK \u003cbr\u003eISBN 978-0-444-53224-4 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eHardbound, 220 pages\u003c\/p\u003e\n\u003cp\u003epublication date: 2011\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIndustrial Biofouling discusses the challenges--and to a lesser extent, the benefits--of biofilms on industrial processing surfaces. It addresses the operating problems caused by establishment and growth of microorganisms, thereby enabling effective equipment design and operation that minimizes biofouling.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDiscusses the chemical and physical control of biofilm growth, with coverage of dosing techniques, equipment cleaning, and cost management\u003c\/p\u003e\n\u003cp\u003ePresents methods for monitoring and evaluating the effectiveness of control techniques\u003c\/p\u003e\n\u003cp\u003eIncorporates explicit figures and diagrams to aid in understanding\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp style=\"text-align: justify; line-height: 18px; margin: 0px 0px 18px; outline-width: 0px; font-family: inherit; color: #3e3d3d; font-size: 11px; vertical-align: baseline; border-width: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\u003cspan class=\"Apple-style-span\" style=\"line-height: 18px; font-family: Verdana, 'Bitstream Vera Sans', sans-serif; color: #3e3d3d; font-size: 11px;\"\u003e\u003ca name=\"2\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction \u003cbr\u003e2. Fluid flow, mass and heat transfer \u003cbr\u003e3. Biofilms \u003cbr\u003e4. Biofouling control \u003cbr\u003e5. Biofouling monitoring \u003cbr\u003e6. Industrial review \u003cbr\u003e7. Conclusions\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:14:50-04:00","created_at":"2017-06-22T21:14:50-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2011","biofilms","Biofouling","biofouling control","book","p-applications","polymer"],"price":26000,"price_min":26000,"price_max":26000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378442948,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Industrial Biofouling","public_title":null,"options":["Default Title"],"price":26000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-444-53224-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-444-53224-4.jpg?v=1499478677"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-444-53224-4.jpg?v=1499478677","options":["Title"],"media":[{"alt":null,"id":356452696157,"position":1,"preview_image":{"aspect_ratio":0.627,"height":499,"width":313,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-444-53224-4.jpg?v=1499478677"},"aspect_ratio":0.627,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-444-53224-4.jpg?v=1499478677","width":313}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: T. Reg Bott, School of Chemical Engineering, the University of Birmingham, Edgbaston, UK \u003cbr\u003eISBN 978-0-444-53224-4 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eHardbound, 220 pages\u003c\/p\u003e\n\u003cp\u003epublication date: 2011\u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eIndustrial Biofouling discusses the challenges--and to a lesser extent, the benefits--of biofilms on industrial processing surfaces. It addresses the operating problems caused by establishment and growth of microorganisms, thereby enabling effective equipment design and operation that minimizes biofouling.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDiscusses the chemical and physical control of biofilm growth, with coverage of dosing techniques, equipment cleaning, and cost management\u003c\/p\u003e\n\u003cp\u003ePresents methods for monitoring and evaluating the effectiveness of control techniques\u003c\/p\u003e\n\u003cp\u003eIncorporates explicit figures and diagrams to aid in understanding\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp style=\"text-align: justify; line-height: 18px; margin: 0px 0px 18px; outline-width: 0px; font-family: inherit; color: #3e3d3d; font-size: 11px; vertical-align: baseline; border-width: 0px; padding: 0px;\"\u003e \u003c\/p\u003e\n\u003cspan class=\"Apple-style-span\" style=\"line-height: 18px; font-family: Verdana, 'Bitstream Vera Sans', sans-serif; color: #3e3d3d; font-size: 11px;\"\u003e\u003ca name=\"2\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction \u003cbr\u003e2. Fluid flow, mass and heat transfer \u003cbr\u003e3. Biofilms \u003cbr\u003e4. Biofouling control \u003cbr\u003e5. Biofouling monitoring \u003cbr\u003e6. Industrial review \u003cbr\u003e7. Conclusions\u003cbr\u003e\u003cbr\u003e"}
Industrial Control Tec...
$297.00
{"id":11242208900,"title":"Industrial Control Technology. A Handbook for Engineers and Researchers","handle":"9780815515715","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Peng Zhang \u003cbr\u003eISBN 9780815515715 \u003cbr\u003e\u003cbr\u003e900 pages · 6\" x 9\" Hardback\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects.\u003cbr\u003e\u003cstrong\u003eAUDIENCE\u003c\/strong\u003e\u003cbr\u003eManufacturing sector including automobiles, aircraft, ships, satellites, robots and intelligent controllers such as copiers and printers. Large scale infrastructure systems such as state-wide power grids, traffic control networks, water supply systems and environmental monitoring systems. Processing factories and plants that implement chemical processing, petroleum processing, wastewater and materials processing. Production sectors such as coal wells, iron, and steel foundries; crude oil and natural gas fields. Researchers and postgraduates in academia working in automation, robotics, controllers, computer control, industrial process control, real-time control, distributed control, and embedded control.\u003cbr\u003e\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cbr\u003eThis handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. \u003cbr\u003e\u003cbr\u003eWhether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources.\u003cbr\u003e\u003cstrong\u003eBISAC SUBJECT HEADINGS\u003c\/strong\u003e\u003cbr\u003eTEC005050: TECHNOLOGY \/ Construction \/ Heating, Ventilation \u0026amp; Air Conditioning\u003cbr\u003eTEC008030: TECHNOLOGY \/ Electronics \/ Circuits \/ Logic\u003cbr\u003eTEC009060: TECHNOLOGY \/ Engineering \/ Industrial\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface\u003cbr\u003e\u003cbr\u003eAcknowledgements \u003cbr\u003e1: Sensors and Actuators for Industrial Control\u003cbr\u003e\u003cbr\u003e1.1 Sensors\u003cbr\u003e\u003cbr\u003e1.2 Actuators\u003cbr\u003e\u003cbr\u003e1.3 Valves\u003cbr\u003e\u003cbr\u003e1.4 References\u003cbr\u003e\u003cbr\u003e2: Computer Hardware for Industrial Control \u003cbr\u003e\u003cbr\u003e2.1 Microprocessor Unit Chipset\u003cbr\u003e\u003cbr\u003e2.2 Programmable Peripheral Devices\u003cbr\u003e\u003cbr\u003e2.3 Application Specific Integrated Circuit (ASIC)\u003cbr\u003e\u003cbr\u003e2.4 References\u003cbr\u003e\u003cbr\u003e3: System Interfaces for Industrial Control\u003cbr\u003e\u003cbr\u003e3.1 Actuator-Sensor Interface\u003cbr\u003e\u003cbr\u003e3.2 Industrial Control System Interface Devices\u003cbr\u003e\u003cbr\u003e3.3 Human-Machine Interface in Industrial Control\u003cbr\u003e\u003cbr\u003e3.4 Highway Addressable Remote Transducer (HART) Field Communications\u003cbr\u003e\u003cbr\u003e3.5 References\u003cbr\u003e\u003cbr\u003e4: Digital Controllers for Industrial Control\u003cbr\u003e\u003cbr\u003e4.1 Industrial Intelligent Controllers\u003cbr\u003e\u003cbr\u003e4.2 Industrial Process Controllers\u003cbr\u003e\u003cbr\u003e4.3 References\u003cbr\u003e\u003cbr\u003e5: Application Software for Industrial Control\u003cbr\u003e\u003cbr\u003e5.1 Boot Code for Microprocessor Unit Chipset\u003cbr\u003e\u003cbr\u003e5.2 Real-Time Operating System \u003cbr\u003e\u003cbr\u003e5.3 Real-Time Application System\u003cbr\u003e\u003cbr\u003e5.4 References\u003cbr\u003e\u003cbr\u003e6: Data Communications in Distributed Control System\u003cbr\u003e\u003cbr\u003e6.1 Distributed Industrial Control System\u003cbr\u003e\u003cbr\u003e6.2 Data Communication Basics\u003cbr\u003e\u003cbr\u003e6.3 Data Transmission Control Circuits and Devices\u003cbr\u003e\u003cbr\u003e6.4 Data Transmission Protocols \u003cbr\u003e\u003cbr\u003e6.5 Data Link Protocols\u003cbr\u003e\u003cbr\u003e6.6 Data Communication Protocols \u003cbr\u003e6.7 References\u003cbr\u003e\u003cbr\u003e7: System Routines in Industrial Control\u003cbr\u003e\u003cbr\u003e7.1 Overviews\u003cbr\u003e\u003cbr\u003e7.2 Power-on and Power-down Routines\u003cbr\u003e\u003cbr\u003e7.3 Install and Configure Routines\u003cbr\u003e\u003cbr\u003e7.4 Diagnostic Routines\u003cbr\u003e\u003cbr\u003e7.5 Simulation Routines\u003cbr\u003e\u003cbr\u003e7.6 References\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003ePeng Zhang\u003c\/strong\u003e\u003cbr\u003e\u003ci\u003eBeijing Normal University, PR of China\u003c\/i\u003e\u003cbr\u003ePeng Zhang is a Professor of Technical Physics at Beijing Normal University, Peoples Republic of China. After receiving his Ph.D. from the Chinese Academy of Sciences in 1988, Dr. Zhang has worked for almost 20 years in the United States, United Kingdom, and China with several industrial corporations and research institutions on industrial control technology and engineering numerical computations. He is currently working on the research and development of real-time embedded and concurrently distributed control and monitoring in varying applications including traffic signal control, remote-sensing control, power plant processes, geophysical prospecting, and parallel computing.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:13:04-04:00","created_at":"2017-06-22T21:13:05-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2008","actuators","automation","book","computer networks","control","control systems","digital controllers","environment","general","Interface Devices","robotics","sensors","software for industrial control","valves"],"price":29700,"price_min":29700,"price_max":29700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378329156,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Industrial Control Technology. A Handbook for Engineers and Researchers","public_title":null,"options":["Default Title"],"price":29700,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"9780815515715","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/9780815515715.jpg?v=1499478743"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/9780815515715.jpg?v=1499478743","options":["Title"],"media":[{"alt":null,"id":356455317597,"position":1,"preview_image":{"aspect_ratio":0.733,"height":499,"width":366,"src":"\/\/chemtec.org\/cdn\/shop\/products\/9780815515715.jpg?v=1499478743"},"aspect_ratio":0.733,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/9780815515715.jpg?v=1499478743","width":366}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Peng Zhang \u003cbr\u003eISBN 9780815515715 \u003cbr\u003e\u003cbr\u003e900 pages · 6\" x 9\" Hardback\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects.\u003cbr\u003e\u003cstrong\u003eAUDIENCE\u003c\/strong\u003e\u003cbr\u003eManufacturing sector including automobiles, aircraft, ships, satellites, robots and intelligent controllers such as copiers and printers. Large scale infrastructure systems such as state-wide power grids, traffic control networks, water supply systems and environmental monitoring systems. Processing factories and plants that implement chemical processing, petroleum processing, wastewater and materials processing. Production sectors such as coal wells, iron, and steel foundries; crude oil and natural gas fields. Researchers and postgraduates in academia working in automation, robotics, controllers, computer control, industrial process control, real-time control, distributed control, and embedded control.\u003cbr\u003e\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003cbr\u003eThis handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. \u003cbr\u003e\u003cbr\u003eWhether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources.\u003cbr\u003e\u003cstrong\u003eBISAC SUBJECT HEADINGS\u003c\/strong\u003e\u003cbr\u003eTEC005050: TECHNOLOGY \/ Construction \/ Heating, Ventilation \u0026amp; Air Conditioning\u003cbr\u003eTEC008030: TECHNOLOGY \/ Electronics \/ Circuits \/ Logic\u003cbr\u003eTEC009060: TECHNOLOGY \/ Engineering \/ Industrial\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface\u003cbr\u003e\u003cbr\u003eAcknowledgements \u003cbr\u003e1: Sensors and Actuators for Industrial Control\u003cbr\u003e\u003cbr\u003e1.1 Sensors\u003cbr\u003e\u003cbr\u003e1.2 Actuators\u003cbr\u003e\u003cbr\u003e1.3 Valves\u003cbr\u003e\u003cbr\u003e1.4 References\u003cbr\u003e\u003cbr\u003e2: Computer Hardware for Industrial Control \u003cbr\u003e\u003cbr\u003e2.1 Microprocessor Unit Chipset\u003cbr\u003e\u003cbr\u003e2.2 Programmable Peripheral Devices\u003cbr\u003e\u003cbr\u003e2.3 Application Specific Integrated Circuit (ASIC)\u003cbr\u003e\u003cbr\u003e2.4 References\u003cbr\u003e\u003cbr\u003e3: System Interfaces for Industrial Control\u003cbr\u003e\u003cbr\u003e3.1 Actuator-Sensor Interface\u003cbr\u003e\u003cbr\u003e3.2 Industrial Control System Interface Devices\u003cbr\u003e\u003cbr\u003e3.3 Human-Machine Interface in Industrial Control\u003cbr\u003e\u003cbr\u003e3.4 Highway Addressable Remote Transducer (HART) Field Communications\u003cbr\u003e\u003cbr\u003e3.5 References\u003cbr\u003e\u003cbr\u003e4: Digital Controllers for Industrial Control\u003cbr\u003e\u003cbr\u003e4.1 Industrial Intelligent Controllers\u003cbr\u003e\u003cbr\u003e4.2 Industrial Process Controllers\u003cbr\u003e\u003cbr\u003e4.3 References\u003cbr\u003e\u003cbr\u003e5: Application Software for Industrial Control\u003cbr\u003e\u003cbr\u003e5.1 Boot Code for Microprocessor Unit Chipset\u003cbr\u003e\u003cbr\u003e5.2 Real-Time Operating System \u003cbr\u003e\u003cbr\u003e5.3 Real-Time Application System\u003cbr\u003e\u003cbr\u003e5.4 References\u003cbr\u003e\u003cbr\u003e6: Data Communications in Distributed Control System\u003cbr\u003e\u003cbr\u003e6.1 Distributed Industrial Control System\u003cbr\u003e\u003cbr\u003e6.2 Data Communication Basics\u003cbr\u003e\u003cbr\u003e6.3 Data Transmission Control Circuits and Devices\u003cbr\u003e\u003cbr\u003e6.4 Data Transmission Protocols \u003cbr\u003e\u003cbr\u003e6.5 Data Link Protocols\u003cbr\u003e\u003cbr\u003e6.6 Data Communication Protocols \u003cbr\u003e6.7 References\u003cbr\u003e\u003cbr\u003e7: System Routines in Industrial Control\u003cbr\u003e\u003cbr\u003e7.1 Overviews\u003cbr\u003e\u003cbr\u003e7.2 Power-on and Power-down Routines\u003cbr\u003e\u003cbr\u003e7.3 Install and Configure Routines\u003cbr\u003e\u003cbr\u003e7.4 Diagnostic Routines\u003cbr\u003e\u003cbr\u003e7.5 Simulation Routines\u003cbr\u003e\u003cbr\u003e7.6 References\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003ePeng Zhang\u003c\/strong\u003e\u003cbr\u003e\u003ci\u003eBeijing Normal University, PR of China\u003c\/i\u003e\u003cbr\u003ePeng Zhang is a Professor of Technical Physics at Beijing Normal University, Peoples Republic of China. After receiving his Ph.D. from the Chinese Academy of Sciences in 1988, Dr. Zhang has worked for almost 20 years in the United States, United Kingdom, and China with several industrial corporations and research institutions on industrial control technology and engineering numerical computations. He is currently working on the research and development of real-time embedded and concurrently distributed control and monitoring in varying applications including traffic signal control, remote-sensing control, power plant processes, geophysical prospecting, and parallel computing.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e"}
Industrial Solvents Ha...
$285.00
{"id":11242245124,"title":"Industrial Solvents Handbook, Fifth Edition","handle":"0-8155-1413-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Ernest W. Flick \u003cbr\u003eISBN 0-8155-1413-1 \u003cbr\u003e\u003cbr\u003ePages: 963 , Tables \u0026amp; figures: 1235\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nCompletely revised, and vastly expanded, this Fifth Edition is a well-established and successful reference volume designed principally for the chemical and other process industries but will be found useful by anyone needing the latest pertinent data on industrial solvents.\u003cbr\u003eThis Fifth Edition is uniquely helpful when it becomes necessary to select a new solvent on a competitive or comparative basis; when the customary solvent, employed hitherto, might no longer be available, or can no longer be used because of environmental reasons; or when prices have risen to such an extent that an existing process must be redesigned to make it economically feasible again.\u003cbr\u003eThe over 1,200 tables in this book contain basic data on the physical properties of most solvents and on the solubilities of a variety of materials in these solvents. Even phase diagrams for multicomponent systems are included. Particularly valuable are the comparative data for various solvents in the last chapter.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nHydrocarbon Solvents \u003cbr\u003eHalogenated Hydrocarbons \u003cbr\u003eChlorinated Hydrocarbons \u003cbr\u003eNitroparaffins \u003cbr\u003eOrganic Sulfur Compounds \u003cbr\u003eMonohydric Alcohols \u003cbr\u003ePolyhydric Alcohols \u003cbr\u003ePhenols \u003cbr\u003eAldehydes \u003cbr\u003eEthers \u003cbr\u003eGlycol Ethers \u003cbr\u003eKetones \u003cbr\u003eAcids \u003cbr\u003eAmines \u003cbr\u003eEsters \u003cbr\u003eHPLC and UV Data \u003cbr\u003eComparative Data For Various Solvents\u003cbr\u003e\u003cbr\u003e","published_at":"2018-02-07T09:01:03-05:00","created_at":"2017-06-22T21:14:59-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["1998","acids","aldehydes","amines","chlorinated hydrocarbons","esters","ethers","glycol ethers","halogenated hydrocarbons","hydrocarbon solvents","industrial solvents","ketones","monohydric alcohols","nitroparaffins","organic sulfur compounds","phenols","polyhydric alcohols","solvent"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378451524,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Industrial Solvents Handbook, Fifth Edition","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1413-1.jpg?v=1499478807"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1413-1.jpg?v=1499478807","options":["Title"],"media":[{"alt":null,"id":356458233949,"position":1,"preview_image":{"aspect_ratio":0.735,"height":499,"width":367,"src":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1413-1.jpg?v=1499478807"},"aspect_ratio":0.735,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1413-1.jpg?v=1499478807","width":367}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Ernest W. Flick \u003cbr\u003eISBN 0-8155-1413-1 \u003cbr\u003e\u003cbr\u003ePages: 963 , Tables \u0026amp; figures: 1235\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nCompletely revised, and vastly expanded, this Fifth Edition is a well-established and successful reference volume designed principally for the chemical and other process industries but will be found useful by anyone needing the latest pertinent data on industrial solvents.\u003cbr\u003eThis Fifth Edition is uniquely helpful when it becomes necessary to select a new solvent on a competitive or comparative basis; when the customary solvent, employed hitherto, might no longer be available, or can no longer be used because of environmental reasons; or when prices have risen to such an extent that an existing process must be redesigned to make it economically feasible again.\u003cbr\u003eThe over 1,200 tables in this book contain basic data on the physical properties of most solvents and on the solubilities of a variety of materials in these solvents. Even phase diagrams for multicomponent systems are included. Particularly valuable are the comparative data for various solvents in the last chapter.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nHydrocarbon Solvents \u003cbr\u003eHalogenated Hydrocarbons \u003cbr\u003eChlorinated Hydrocarbons \u003cbr\u003eNitroparaffins \u003cbr\u003eOrganic Sulfur Compounds \u003cbr\u003eMonohydric Alcohols \u003cbr\u003ePolyhydric Alcohols \u003cbr\u003ePhenols \u003cbr\u003eAldehydes \u003cbr\u003eEthers \u003cbr\u003eGlycol Ethers \u003cbr\u003eKetones \u003cbr\u003eAcids \u003cbr\u003eAmines \u003cbr\u003eEsters \u003cbr\u003eHPLC and UV Data \u003cbr\u003eComparative Data For Various Solvents\u003cbr\u003e\u003cbr\u003e"}
Industry Guide to Poly...
$200.00
{"id":11242245572,"title":"Industry Guide to Polymer Nanocomposites","handle":"978-1-90647-904-6","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Dr. Günter Beyer (Editor) \u003cbr\u003eISBN 978-1-90647-904-6 \u003cbr\u003e\u003cbr\u003e386 pages, Hardback\n\u003ch5\u003eSummary\u003c\/h5\u003e\nA truly practical guide, which aims to cut through the hype and show where these new ‘wonder materials’ will really fit into your industry and products.\u003cbr\u003e\u003cbr\u003eThe editor has drawn together contributions from academics, materials suppliers, product manufacturers, NASA and the US army, which show how these materials really perform, and where they are already finding uses. Flame retardancy and barrier properties are key benefits.\u003cbr\u003e\u003cbr\u003ePerformance, however, is only part of the story. To achieve commercial success new materials must also deliver these properties safely and predictably. Processing is a key issue when investment in new equipment may not be an option. There are questions regarding the health impacts of all nanoscale particles. All these topics and more are covered in the following sections:\u003cbr\u003e\u003cbr\u003e• Developments in Commercial Polymer Nanocomposite Materials\u003cbr\u003e\u003cbr\u003e• Working with Polymer Nanocomposite Materials\u003cbr\u003e\u003cbr\u003e• Unique Properties of Polymer Nanocomposites\u003cbr\u003e\u003cbr\u003e• Polymer Nanocomposites in Demanding Industrial Applications\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nIntroduction \u003cbr\u003eDevelopments in Commercial Polymer Nanocomposite Materials \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e1. Synthesis, structure, properties, and characterization of organically modified clay minerals by Hendrik Heinz, University of Akron, USA \u003c\/strong\u003e \u003c\/p\u003e\n1.1 Overview of clay minerals \u003cbr\u003e1.2 Synthesis of organically modified clay minerals \u003cbr\u003e1.3 Structure of organically modified clay minerals \u003cbr\u003e1.3.1 Effect of cation density on the surface and the inorganic interface \u003cbr\u003e1.3.2 Low packing density \u003cbr\u003e1.3.3 Medium packing density \u003cbr\u003e1.3.4 High packing density \u003cbr\u003e1.3.5 Non-quantitative ion exchange \u003cbr\u003e1.4 Characterization and properties of organically modified clay minerals \u003cbr\u003e1.4.1 X-ray diffraction, microscopy, and structural properties \u003cbr\u003e1.4.2 DSC, DTG, thermal transitions, and thermal decomposition \u003cbr\u003e1.4.3 IR\/Raman spectroscopy, NMR spectroscopy, and chain conformation \u003cbr\u003e1.4.4 Dielectric, elastic, and tilt angle measurements \u003cbr\u003e1.4.5 Surface tension measurements and cleavage energies \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e2. Polymer nanocomposites formulated with hectorite nanoclays by Günter Beyer, Kabelwerk Eupen AG, Eupen, Belgium \u003c\/strong\u003e\u003c\/p\u003e\n2.1 Introduction \u003cbr\u003e2.2 Thermal stability of hectorite-based nanoclays and nanocomposites \u003cbr\u003e2.2.1 Nanoclay stability \u003cbr\u003e2.2.2. Effect of the nanoclay on the degradation process of the matrix polymer \u003cbr\u003e2.2.3 Thermal stability of the produced nanocomposites \u003cbr\u003e2.3 Flame Retardant properties of hectorite-based nanocomposites \u003cbr\u003e2.4 Barrier properties of hectorite-based nanocomposites \u003cbr\u003e2.5 Nanocomposite foams formulated with hectorite nanoclay \u003cbr\u003e2.6 Nanoclay dispersion in thermoplastics \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e3. Polymer nanocomposites based on carbon nanotubes by Olivier Decroly, Nanocyl SA, Sambreville, Belgium \u003c\/strong\u003e\u003c\/p\u003e\n3.1 Introduction \u003cbr\u003e3.2 Carbon nanotube nanocomposites \u003cbr\u003e3.2.1 Conductive Carbon nanotube nanocomposites \u003cbr\u003e3.2.2 Structural composite applications \u003cbr\u003e3.2.3 Coatings applications \u003cbr\u003eWorking with Polymer Nanocomposite Materials \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e4. Processing of polymer nanocomposites by Daniel Schmidt, Dept of Plastics Engineering, University of Massachusetts, USA \u003c\/strong\u003e\u003c\/p\u003e\n4.1 What is processing and why is it necessary? \u003cbr\u003e4.2 What is needed to process a polymer nanocomposite? \u003cbr\u003e4.2.1 Enhancing polymer mobility \u003cbr\u003e4.2.2 The consequences of processing \u003cbr\u003e4.2.3 A balanced approach \u003cbr\u003e4.3 Does the polymer have to be a solid at room temperature? \u003cbr\u003e4.4 Do we need to start with a polymer at all? \u003cbr\u003e4.5 Can we do away with the pre-formed nanofiller as well? \u003cbr\u003e4.6 What are our options as far as pre-formed nanofillers? \u003cbr\u003e4.7 What makes a nanofiller disperse in a particular polymer during processing? \u003cbr\u003e4.7.1 The thermodynamics of dispersion: entropy \u003cbr\u003e4.7.2 The thermodynamics of dispersion: enthalpy \u003cbr\u003e4.7.3 Complications: crystallinity \u003cbr\u003e4.7.4 Complications: multi-phase systems \u003cbr\u003e4.7.5 Achieving thermodynamic compatibility – practical considerations \u003cbr\u003e4.7.6 The kinetics of physical dispersion \u003cbr\u003e4.7.7 Dispersion kinetics in the presence of chemical reactions \u003cbr\u003e4.8 What should a “well-processed” polymer nanocomposite look like \u003cbr\u003e4.8.1 The realities of nanocomposite processing \u003cbr\u003e4.9 What are our options for nanocomposite processing? \u003cbr\u003e4.9.1 The importance of pre-processing \u003cbr\u003e4.10 What processing techniques involve just polymer and nanofiller? \u003cbr\u003e4.10.1 Physical mixing\/dry blending \u003cbr\u003e4.10.2 Compaction \u003cbr\u003e4.10.3 Solid state shear processing \u003cbr\u003e4.10.4 Melt blending \u003cbr\u003e4.11 What additional options do we have with solutions \u003cbr\u003e4.11.1 Physical mixing\/“wet blending” \u003cbr\u003e4.12 What about reactive processing? \u003cbr\u003e4.13 Are there any additional considerations? \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e5. Stabilisation of polymer nanocomposites by Rudolf Pfändner, Ciba Lampertheim GmbH, Lampertheim, Germany \u003c\/strong\u003e\u003c\/p\u003e\n5.1 Introduction \u003cbr\u003e5.2 Challenges of stabilisation of filled polymers \u003cbr\u003e5.3 Processing and long-term thermal stabilisation of polymer nanocomposites \u003cbr\u003e5.4 Light stabilisation of polymer nanocomposites \u003cbr\u003e5.5 Summary and outlook \u003cbr\u003eList of stabilisers \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e6. Toxicology of nanoparticles relevant to polymer by Paul Borm, Centre of Expertise Life Sciences (CEL), Hogeschool Zuyd, Heerlen, Netherlands \u003c\/strong\u003e\u003c\/p\u003e\n6.1 Introduction \u003cbr\u003e6.2 Toxicological effects of nanoparticles \u003cbr\u003e6.2.1 Particle definitions \u003cbr\u003e6.2.2 Effects of nanoparticles upon inhalation \u003cbr\u003e6.3 Nanoparticles used in nanocomposites \u003cbr\u003e6.3.1 Carbon nanotubes \u003cbr\u003e6.3.2 Metal oxide particles \u003cbr\u003e6.3.3 Silica and organoclays \u003cbr\u003e6.4 Need for unifying concepts \u003cbr\u003e\n\u003cp\u003eUnique Properties of Polymer Nanocomposites\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e7. Flame retardancy from polymer nanocomposites – from research to technical products by Günter Beyer, Kabelwerk Eupen AG, Eupen, Belgium \u003c\/strong\u003e\u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Organoclay nanocomposites \u003cbr\u003e7.2.1 Processing and structure of EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.2 Thermal stability of EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.3 Flammability properties of EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.4 NMR investigation and FR mechanism of nanocomposites \u003cbr\u003e7.2.5 Intercalation versus exfoliation in EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.6 Combination of the classical flame retardant filler ATH with organoclays \u003cbr\u003e7.3 Cable Applications \u003cbr\u003e7.3.1 Coaxial cable passing UL 1666 fi retest with an organoclay\/ATH-based outer sheath \u003cbr\u003e7.3.2 Medium voltage cables with organoclay\/ATH-based outer sheaths \u003cbr\u003e7.3.4 Energy cables passing prEN 50399 with an organoclay ATH-based outer sheath \u003cbr\u003e7.4 Synergistic effects with halogenated flame retardants \u003cbr\u003e7.5 Commercial examples of nanocomposite-based compounds \u003cbr\u003e7.6 Carbon nanotube composites \u003cbr\u003e7.6.1 General properties of carbon nanotubes \u003cbr\u003e7.6.2 Synthesis and purification of CNTs \u003cbr\u003e7.6.3 Flammability of EVA\/MWCNT compounds and EVA\/MWCNT\/organoclay compounds \u003cbr\u003e7.6.4 Crack density and surface results of charred MWCNT compounds \u003cbr\u003e7.6.5 Flammability of LDPE\/CNT compounds \u003cbr\u003e7.6.6 Cable with the new fire retardant system MWCNT\/organoclay\/ATH \u003cbr\u003e7.7 Outlook \u003cbr\u003e\n\u003cp\u003e7.8 Summary\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e8. Polyhedral oligomeric silsesquioxane flame retardancy by Joseph Lichtenhan, Hybrid Plastics Inc., Hattiesburg, USA \u003c\/strong\u003e \u003cbr\u003e8.1 Introduction \u003cbr\u003e8.2 POSS chemical technology and unique features \u003cbr\u003e8.3 Successful use of POSS as a fire retardant \u003cbr\u003e8.4 Conventional fire retardants and POSS \u003cbr\u003e8.5 POSS and fire-retardant coatings for textiles \u003cbr\u003e8.6 Commercial applications \u003cbr\u003e8.7 Conclusions \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e9. Barrier property enhancement by polymer nanocomposites by Tie Lan and Ying Liang, Nanocor Inc., Hoffman Estates, USA \u003c\/strong\u003e \u003c\/p\u003e\n9.1 Introduction \u003cbr\u003e9.1.1 Organoclay materials \u003cbr\u003e9.2 Formation of polymer-clay nanocomposites \u003cbr\u003e\n\u003cp\u003e9.3 Nano-effects in barrier enhancement \u003c\/p\u003e\n\u003cp\u003e9.4 Summary \u003c\/p\u003e\n\u003cstrong\u003e10. Status of biodegradable polymer nanocomposites for industrial applications by Jo Ann Ratto, Christopher Thellen and Jean Lucciarini, US Army Natick Soldier Research, Development, and Engineering Centre, USA \u003c\/strong\u003e\u003cbr\u003e10.1 Introduction \u003cbr\u003e10.2 Biodegradable polymers \u003cbr\u003e10.3 Nanocomposites \u003cbr\u003e10.3.1 Structure of montmorillonite layered silicates (MLS) \u003cbr\u003e10.3.2 Morphology of polymer\/MLS nanocomposites \u003cbr\u003e10.4 Biodegradable nanocomposites \u003cbr\u003e10.5 Biodegradability \u003cbr\u003e10.5.1 A recent study of PHB nanocomposites \u003cbr\u003e10.6 Processability issues \u003cbr\u003e10.6.1 A recent study of PCL nanocomposites \u003cbr\u003e10.7 Attainable properties \u003cbr\u003e10.7.1 A recent study of PLA\/PCL nanocomposites \u003cbr\u003e10.8 Performance data \u003cbr\u003e10.9 Commercially viable materials \u003cbr\u003e10.9.1 A recent study comparing biodegradable nanocomposites to polyethylene terephthalate (PET) \u003cbr\u003e10.10 Applications \u003cbr\u003e10.10.1 A recent patent on biodegradable polymeric nanocomposite compositions \u003cbr\u003e10.11 The future of biodegradable nanocomposites \u003cbr\u003e10.11.1 Life cycle assessment for biodegradable nanocomposites \u003cbr\u003e10.11.2 Safety of biodegradable nanocomposites \u003cbr\u003e\n\u003cp\u003e10.12 Summary \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e11 Thermal properties of polymers with graphitic nanofibres by Ernst Hammel, Andreas Eder and Xinhe Tang, Electorvac AB, Klosterneuburg, Austria \u003c\/strong\u003e\u003cbr\u003e11.1 Introduction \u003cbr\u003e11.2 Thermal Interface Materials \u003cbr\u003e11.3 Thermally Conductive Plastics \u003cbr\u003e11.4 Conclusions \u003cbr\u003ePolymer Nanocomposites in Demanding Industrial Applications \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e12. Automotive industry applications of polymer nanocomposites by William Rodgers, General Motors Corp. Research and Development Center, Warren, USA \u003c\/strong\u003e\u003c\/p\u003e\n12.1 Introduction \u003cbr\u003e12.2 Requirements for the automotive industry \u003cbr\u003e12.2.1 Surface appearance \u003cbr\u003e12.2.2 Measurement techniques \u003cbr\u003e12.2.3 Aspect Ratio \u003cbr\u003e12.2.4 Minimization of mass \u003cbr\u003e12.3 Manufacture of nanocomposite systems \u003cbr\u003e12.3.1 In-situ polymerization \u003cbr\u003e12.3.2 Melt processing \u003cbr\u003e12.3.3 Injection moulding \u003cbr\u003e12.4 Applications of nanocomposites in the automotive industry \u003cbr\u003e12.4.1 Applications using carbon nanotubes \u003cbr\u003e12.4.2 Applications of organoclay nanocomposites \u003cbr\u003e12.4.2.1 Underhood applications \u003cbr\u003e12.4.2.2 Exterior applications \u003cbr\u003e12.4.2.3 Interior applications \u003cbr\u003e12.5 The future of nanoclay composites \u003cbr\u003e12.5.1 Alternative conventional filler materials \u003cbr\u003e12.5.2 Exfoliation issues with olefinic resins \u003cbr\u003e12.5.3 New nanomaterials \u003cbr\u003e12.6 Concluding remarks \u003cbr\u003e13. Polymer nanocomposites in aerospace applications by Michael Meador, NASA Glenn Research Centre, Cleveland, USA \u003cbr\u003e3.1 Background \u003cbr\u003e12.3.2 Melt processing \u003cbr\u003e12.3.3 Injection moulding \u003cbr\u003e12.4 Applications of nanocomposites in the automotive industry \u003cbr\u003e12.4.1 Applications using carbon nanotubes \u003cbr\u003e12.4.2 Applications of organoclay nanocomposites \u003cbr\u003e12.4.2.1 Underhood applications \u003cbr\u003e12.4.2.2 Exterior applications \u003cbr\u003e12.4.2.3 Interior applications \u003cbr\u003e12.5 The future of nanoclay composites \u003cbr\u003e12.5.1 Alternative conventional filler materials \u003cbr\u003e12.5.2 Exfoliation issues with olefinic resins \u003cbr\u003e12.5.3 New nanomaterials \u003cbr\u003e12.6 Concluding remarks \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e13. Polymer nanocomposites in aerospace applications by Michael Meador, NASA Glenn Research Centre, Cleveland, USA \u003c\/strong\u003e\u003c\/p\u003e\n13.1 Background \u003cbr\u003e13.2 Clays \u003cbr\u003e13.2.1 Background \u003cbr\u003e13.2.2 Cryotanks \u003cbr\u003e13.2.2.1 Permeability \u003cbr\u003e13.2.2.2 Toughness \u003cbr\u003e13.2.3 Other structures \u003cbr\u003e13.3 Carbon-based nanostructured additives \u003cbr\u003e13.3.1 Carbon nanotubes \u003cbr\u003e13.3.1.1 Synthesis methods \u003cbr\u003e13.3.1.2 Purification \u003cbr\u003e13.3.1.3 Functionalization \u003cbr\u003e13.3.2 Carbon nanotube-based nanocomposites \u003cbr\u003e13.3.2.1 Electrical and thermal conductivity \u003cbr\u003e13.3.2.2 Mechanical properties \u003cbr\u003e13.3.3 Carbon nanotube-based fibres \u003cbr\u003e13.3.4 Other nanoscale carbon additives \u003cbr\u003e13.3.4.1 Expanded graphite and nanocomposites \u003cbr\u003e13.3.4.2 Graphite oxides and nanocomposites \u003cbr\u003e13.3.4.3 Functionalized graphene sheets and nanocomposites \u003cbr\u003e13.4 Conclusions \u003cbr\u003eGlossary of materials and techniques referred to in this chapter \u003cbr\u003eReferences \u003cbr\u003eAppendix \u003cbr\u003eGlossary of abbreviations \u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:15:00-04:00","created_at":"2017-06-22T21:15:00-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2009","applications","book","carbon nanotubes","nano","nanoclay","nanocomposites","nanofiller","polymer","thermal properties"],"price":20000,"price_min":20000,"price_max":20000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378452036,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Industry Guide to Polymer Nanocomposites","public_title":null,"options":["Default Title"],"price":20000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-90647-904-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-90647-904-6.jpg?v=1499724598"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-90647-904-6.jpg?v=1499724598","options":["Title"],"media":[{"alt":null,"id":356459413597,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-90647-904-6.jpg?v=1499724598"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-90647-904-6.jpg?v=1499724598","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Dr. Günter Beyer (Editor) \u003cbr\u003eISBN 978-1-90647-904-6 \u003cbr\u003e\u003cbr\u003e386 pages, Hardback\n\u003ch5\u003eSummary\u003c\/h5\u003e\nA truly practical guide, which aims to cut through the hype and show where these new ‘wonder materials’ will really fit into your industry and products.\u003cbr\u003e\u003cbr\u003eThe editor has drawn together contributions from academics, materials suppliers, product manufacturers, NASA and the US army, which show how these materials really perform, and where they are already finding uses. Flame retardancy and barrier properties are key benefits.\u003cbr\u003e\u003cbr\u003ePerformance, however, is only part of the story. To achieve commercial success new materials must also deliver these properties safely and predictably. Processing is a key issue when investment in new equipment may not be an option. There are questions regarding the health impacts of all nanoscale particles. All these topics and more are covered in the following sections:\u003cbr\u003e\u003cbr\u003e• Developments in Commercial Polymer Nanocomposite Materials\u003cbr\u003e\u003cbr\u003e• Working with Polymer Nanocomposite Materials\u003cbr\u003e\u003cbr\u003e• Unique Properties of Polymer Nanocomposites\u003cbr\u003e\u003cbr\u003e• Polymer Nanocomposites in Demanding Industrial Applications\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nIntroduction \u003cbr\u003eDevelopments in Commercial Polymer Nanocomposite Materials \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e1. Synthesis, structure, properties, and characterization of organically modified clay minerals by Hendrik Heinz, University of Akron, USA \u003c\/strong\u003e \u003c\/p\u003e\n1.1 Overview of clay minerals \u003cbr\u003e1.2 Synthesis of organically modified clay minerals \u003cbr\u003e1.3 Structure of organically modified clay minerals \u003cbr\u003e1.3.1 Effect of cation density on the surface and the inorganic interface \u003cbr\u003e1.3.2 Low packing density \u003cbr\u003e1.3.3 Medium packing density \u003cbr\u003e1.3.4 High packing density \u003cbr\u003e1.3.5 Non-quantitative ion exchange \u003cbr\u003e1.4 Characterization and properties of organically modified clay minerals \u003cbr\u003e1.4.1 X-ray diffraction, microscopy, and structural properties \u003cbr\u003e1.4.2 DSC, DTG, thermal transitions, and thermal decomposition \u003cbr\u003e1.4.3 IR\/Raman spectroscopy, NMR spectroscopy, and chain conformation \u003cbr\u003e1.4.4 Dielectric, elastic, and tilt angle measurements \u003cbr\u003e1.4.5 Surface tension measurements and cleavage energies \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e2. Polymer nanocomposites formulated with hectorite nanoclays by Günter Beyer, Kabelwerk Eupen AG, Eupen, Belgium \u003c\/strong\u003e\u003c\/p\u003e\n2.1 Introduction \u003cbr\u003e2.2 Thermal stability of hectorite-based nanoclays and nanocomposites \u003cbr\u003e2.2.1 Nanoclay stability \u003cbr\u003e2.2.2. Effect of the nanoclay on the degradation process of the matrix polymer \u003cbr\u003e2.2.3 Thermal stability of the produced nanocomposites \u003cbr\u003e2.3 Flame Retardant properties of hectorite-based nanocomposites \u003cbr\u003e2.4 Barrier properties of hectorite-based nanocomposites \u003cbr\u003e2.5 Nanocomposite foams formulated with hectorite nanoclay \u003cbr\u003e2.6 Nanoclay dispersion in thermoplastics \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e3. Polymer nanocomposites based on carbon nanotubes by Olivier Decroly, Nanocyl SA, Sambreville, Belgium \u003c\/strong\u003e\u003c\/p\u003e\n3.1 Introduction \u003cbr\u003e3.2 Carbon nanotube nanocomposites \u003cbr\u003e3.2.1 Conductive Carbon nanotube nanocomposites \u003cbr\u003e3.2.2 Structural composite applications \u003cbr\u003e3.2.3 Coatings applications \u003cbr\u003eWorking with Polymer Nanocomposite Materials \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e4. Processing of polymer nanocomposites by Daniel Schmidt, Dept of Plastics Engineering, University of Massachusetts, USA \u003c\/strong\u003e\u003c\/p\u003e\n4.1 What is processing and why is it necessary? \u003cbr\u003e4.2 What is needed to process a polymer nanocomposite? \u003cbr\u003e4.2.1 Enhancing polymer mobility \u003cbr\u003e4.2.2 The consequences of processing \u003cbr\u003e4.2.3 A balanced approach \u003cbr\u003e4.3 Does the polymer have to be a solid at room temperature? \u003cbr\u003e4.4 Do we need to start with a polymer at all? \u003cbr\u003e4.5 Can we do away with the pre-formed nanofiller as well? \u003cbr\u003e4.6 What are our options as far as pre-formed nanofillers? \u003cbr\u003e4.7 What makes a nanofiller disperse in a particular polymer during processing? \u003cbr\u003e4.7.1 The thermodynamics of dispersion: entropy \u003cbr\u003e4.7.2 The thermodynamics of dispersion: enthalpy \u003cbr\u003e4.7.3 Complications: crystallinity \u003cbr\u003e4.7.4 Complications: multi-phase systems \u003cbr\u003e4.7.5 Achieving thermodynamic compatibility – practical considerations \u003cbr\u003e4.7.6 The kinetics of physical dispersion \u003cbr\u003e4.7.7 Dispersion kinetics in the presence of chemical reactions \u003cbr\u003e4.8 What should a “well-processed” polymer nanocomposite look like \u003cbr\u003e4.8.1 The realities of nanocomposite processing \u003cbr\u003e4.9 What are our options for nanocomposite processing? \u003cbr\u003e4.9.1 The importance of pre-processing \u003cbr\u003e4.10 What processing techniques involve just polymer and nanofiller? \u003cbr\u003e4.10.1 Physical mixing\/dry blending \u003cbr\u003e4.10.2 Compaction \u003cbr\u003e4.10.3 Solid state shear processing \u003cbr\u003e4.10.4 Melt blending \u003cbr\u003e4.11 What additional options do we have with solutions \u003cbr\u003e4.11.1 Physical mixing\/“wet blending” \u003cbr\u003e4.12 What about reactive processing? \u003cbr\u003e4.13 Are there any additional considerations? \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e5. Stabilisation of polymer nanocomposites by Rudolf Pfändner, Ciba Lampertheim GmbH, Lampertheim, Germany \u003c\/strong\u003e\u003c\/p\u003e\n5.1 Introduction \u003cbr\u003e5.2 Challenges of stabilisation of filled polymers \u003cbr\u003e5.3 Processing and long-term thermal stabilisation of polymer nanocomposites \u003cbr\u003e5.4 Light stabilisation of polymer nanocomposites \u003cbr\u003e5.5 Summary and outlook \u003cbr\u003eList of stabilisers \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e6. Toxicology of nanoparticles relevant to polymer by Paul Borm, Centre of Expertise Life Sciences (CEL), Hogeschool Zuyd, Heerlen, Netherlands \u003c\/strong\u003e\u003c\/p\u003e\n6.1 Introduction \u003cbr\u003e6.2 Toxicological effects of nanoparticles \u003cbr\u003e6.2.1 Particle definitions \u003cbr\u003e6.2.2 Effects of nanoparticles upon inhalation \u003cbr\u003e6.3 Nanoparticles used in nanocomposites \u003cbr\u003e6.3.1 Carbon nanotubes \u003cbr\u003e6.3.2 Metal oxide particles \u003cbr\u003e6.3.3 Silica and organoclays \u003cbr\u003e6.4 Need for unifying concepts \u003cbr\u003e\n\u003cp\u003eUnique Properties of Polymer Nanocomposites\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e7. Flame retardancy from polymer nanocomposites – from research to technical products by Günter Beyer, Kabelwerk Eupen AG, Eupen, Belgium \u003c\/strong\u003e\u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 Organoclay nanocomposites \u003cbr\u003e7.2.1 Processing and structure of EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.2 Thermal stability of EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.3 Flammability properties of EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.4 NMR investigation and FR mechanism of nanocomposites \u003cbr\u003e7.2.5 Intercalation versus exfoliation in EVA\/organoclay-based nanocomposites \u003cbr\u003e7.2.6 Combination of the classical flame retardant filler ATH with organoclays \u003cbr\u003e7.3 Cable Applications \u003cbr\u003e7.3.1 Coaxial cable passing UL 1666 fi retest with an organoclay\/ATH-based outer sheath \u003cbr\u003e7.3.2 Medium voltage cables with organoclay\/ATH-based outer sheaths \u003cbr\u003e7.3.4 Energy cables passing prEN 50399 with an organoclay ATH-based outer sheath \u003cbr\u003e7.4 Synergistic effects with halogenated flame retardants \u003cbr\u003e7.5 Commercial examples of nanocomposite-based compounds \u003cbr\u003e7.6 Carbon nanotube composites \u003cbr\u003e7.6.1 General properties of carbon nanotubes \u003cbr\u003e7.6.2 Synthesis and purification of CNTs \u003cbr\u003e7.6.3 Flammability of EVA\/MWCNT compounds and EVA\/MWCNT\/organoclay compounds \u003cbr\u003e7.6.4 Crack density and surface results of charred MWCNT compounds \u003cbr\u003e7.6.5 Flammability of LDPE\/CNT compounds \u003cbr\u003e7.6.6 Cable with the new fire retardant system MWCNT\/organoclay\/ATH \u003cbr\u003e7.7 Outlook \u003cbr\u003e\n\u003cp\u003e7.8 Summary\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e8. Polyhedral oligomeric silsesquioxane flame retardancy by Joseph Lichtenhan, Hybrid Plastics Inc., Hattiesburg, USA \u003c\/strong\u003e \u003cbr\u003e8.1 Introduction \u003cbr\u003e8.2 POSS chemical technology and unique features \u003cbr\u003e8.3 Successful use of POSS as a fire retardant \u003cbr\u003e8.4 Conventional fire retardants and POSS \u003cbr\u003e8.5 POSS and fire-retardant coatings for textiles \u003cbr\u003e8.6 Commercial applications \u003cbr\u003e8.7 Conclusions \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e9. Barrier property enhancement by polymer nanocomposites by Tie Lan and Ying Liang, Nanocor Inc., Hoffman Estates, USA \u003c\/strong\u003e \u003c\/p\u003e\n9.1 Introduction \u003cbr\u003e9.1.1 Organoclay materials \u003cbr\u003e9.2 Formation of polymer-clay nanocomposites \u003cbr\u003e\n\u003cp\u003e9.3 Nano-effects in barrier enhancement \u003c\/p\u003e\n\u003cp\u003e9.4 Summary \u003c\/p\u003e\n\u003cstrong\u003e10. Status of biodegradable polymer nanocomposites for industrial applications by Jo Ann Ratto, Christopher Thellen and Jean Lucciarini, US Army Natick Soldier Research, Development, and Engineering Centre, USA \u003c\/strong\u003e\u003cbr\u003e10.1 Introduction \u003cbr\u003e10.2 Biodegradable polymers \u003cbr\u003e10.3 Nanocomposites \u003cbr\u003e10.3.1 Structure of montmorillonite layered silicates (MLS) \u003cbr\u003e10.3.2 Morphology of polymer\/MLS nanocomposites \u003cbr\u003e10.4 Biodegradable nanocomposites \u003cbr\u003e10.5 Biodegradability \u003cbr\u003e10.5.1 A recent study of PHB nanocomposites \u003cbr\u003e10.6 Processability issues \u003cbr\u003e10.6.1 A recent study of PCL nanocomposites \u003cbr\u003e10.7 Attainable properties \u003cbr\u003e10.7.1 A recent study of PLA\/PCL nanocomposites \u003cbr\u003e10.8 Performance data \u003cbr\u003e10.9 Commercially viable materials \u003cbr\u003e10.9.1 A recent study comparing biodegradable nanocomposites to polyethylene terephthalate (PET) \u003cbr\u003e10.10 Applications \u003cbr\u003e10.10.1 A recent patent on biodegradable polymeric nanocomposite compositions \u003cbr\u003e10.11 The future of biodegradable nanocomposites \u003cbr\u003e10.11.1 Life cycle assessment for biodegradable nanocomposites \u003cbr\u003e10.11.2 Safety of biodegradable nanocomposites \u003cbr\u003e\n\u003cp\u003e10.12 Summary \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cstrong\u003e11 Thermal properties of polymers with graphitic nanofibres by Ernst Hammel, Andreas Eder and Xinhe Tang, Electorvac AB, Klosterneuburg, Austria \u003c\/strong\u003e\u003cbr\u003e11.1 Introduction \u003cbr\u003e11.2 Thermal Interface Materials \u003cbr\u003e11.3 Thermally Conductive Plastics \u003cbr\u003e11.4 Conclusions \u003cbr\u003ePolymer Nanocomposites in Demanding Industrial Applications \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e12. Automotive industry applications of polymer nanocomposites by William Rodgers, General Motors Corp. Research and Development Center, Warren, USA \u003c\/strong\u003e\u003c\/p\u003e\n12.1 Introduction \u003cbr\u003e12.2 Requirements for the automotive industry \u003cbr\u003e12.2.1 Surface appearance \u003cbr\u003e12.2.2 Measurement techniques \u003cbr\u003e12.2.3 Aspect Ratio \u003cbr\u003e12.2.4 Minimization of mass \u003cbr\u003e12.3 Manufacture of nanocomposite systems \u003cbr\u003e12.3.1 In-situ polymerization \u003cbr\u003e12.3.2 Melt processing \u003cbr\u003e12.3.3 Injection moulding \u003cbr\u003e12.4 Applications of nanocomposites in the automotive industry \u003cbr\u003e12.4.1 Applications using carbon nanotubes \u003cbr\u003e12.4.2 Applications of organoclay nanocomposites \u003cbr\u003e12.4.2.1 Underhood applications \u003cbr\u003e12.4.2.2 Exterior applications \u003cbr\u003e12.4.2.3 Interior applications \u003cbr\u003e12.5 The future of nanoclay composites \u003cbr\u003e12.5.1 Alternative conventional filler materials \u003cbr\u003e12.5.2 Exfoliation issues with olefinic resins \u003cbr\u003e12.5.3 New nanomaterials \u003cbr\u003e12.6 Concluding remarks \u003cbr\u003e13. Polymer nanocomposites in aerospace applications by Michael Meador, NASA Glenn Research Centre, Cleveland, USA \u003cbr\u003e3.1 Background \u003cbr\u003e12.3.2 Melt processing \u003cbr\u003e12.3.3 Injection moulding \u003cbr\u003e12.4 Applications of nanocomposites in the automotive industry \u003cbr\u003e12.4.1 Applications using carbon nanotubes \u003cbr\u003e12.4.2 Applications of organoclay nanocomposites \u003cbr\u003e12.4.2.1 Underhood applications \u003cbr\u003e12.4.2.2 Exterior applications \u003cbr\u003e12.4.2.3 Interior applications \u003cbr\u003e12.5 The future of nanoclay composites \u003cbr\u003e12.5.1 Alternative conventional filler materials \u003cbr\u003e12.5.2 Exfoliation issues with olefinic resins \u003cbr\u003e12.5.3 New nanomaterials \u003cbr\u003e12.6 Concluding remarks \u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003e13. Polymer nanocomposites in aerospace applications by Michael Meador, NASA Glenn Research Centre, Cleveland, USA \u003c\/strong\u003e\u003c\/p\u003e\n13.1 Background \u003cbr\u003e13.2 Clays \u003cbr\u003e13.2.1 Background \u003cbr\u003e13.2.2 Cryotanks \u003cbr\u003e13.2.2.1 Permeability \u003cbr\u003e13.2.2.2 Toughness \u003cbr\u003e13.2.3 Other structures \u003cbr\u003e13.3 Carbon-based nanostructured additives \u003cbr\u003e13.3.1 Carbon nanotubes \u003cbr\u003e13.3.1.1 Synthesis methods \u003cbr\u003e13.3.1.2 Purification \u003cbr\u003e13.3.1.3 Functionalization \u003cbr\u003e13.3.2 Carbon nanotube-based nanocomposites \u003cbr\u003e13.3.2.1 Electrical and thermal conductivity \u003cbr\u003e13.3.2.2 Mechanical properties \u003cbr\u003e13.3.3 Carbon nanotube-based fibres \u003cbr\u003e13.3.4 Other nanoscale carbon additives \u003cbr\u003e13.3.4.1 Expanded graphite and nanocomposites \u003cbr\u003e13.3.4.2 Graphite oxides and nanocomposites \u003cbr\u003e13.3.4.3 Functionalized graphene sheets and nanocomposites \u003cbr\u003e13.4 Conclusions \u003cbr\u003eGlossary of materials and techniques referred to in this chapter \u003cbr\u003eReferences \u003cbr\u003eAppendix \u003cbr\u003eGlossary of abbreviations \u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e"}
Injection Moulding 200...
$180.00
{"id":11242238212,"title":"Injection Moulding 2002, Barcelona, Spain, 18th- 19th March, 2002","handle":"978-1-85957-314-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Conference Proceedings, 2002 \u003cbr\u003eISBN 978-1-85957-314-3 \u003cbr\u003e\u003cbr\u003eBarcelona, Spain, 18th- 19th March 2002\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe comprehensive technical programme provided presentations from leading experts in the injection moulding and related fields. Papers covered material development and design solutions, optimisation of the injection moulding process through 3D simulation techniques and computer-aided engineering (CAE), issues of globalisation within the industry, opportunities provided by the internet and e-commerce, the use of gas and water assisted moulding techniques help to reduce cycle times and improve quality, and rapid tooling design and production processes. \u003cbr\u003e\u003cbr\u003eThe Injection Moulding 2002 conference provided an excellent opportunity to hear the latest injection moulding developments and gain a truly global perspective of this important industry.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"10\" border=\"0\" class=\"rapcss\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cspan face=\"verdana,geneva\" style=\"font-family: verdana, geneva;\"\u003e\u003cspan size=\"1\" style=\"font-size: xx-small;\"\u003eTrue 3D Simulation Techniques of Injection Moulding and Related Processes \u003cbr\u003e\u003ci\u003eDavid Hsu, CoreTech System Co, Taiwan \u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eUsing 3D Simulation for the Optimisation of Injection Moulded Thermoset Materials for Automotive Applications \u003cbr\u003e\u003ci\u003eLothar Kallien, Sigma Engineering GmbH, Germany \u003c\/i\u003eWhy Real-time Production and Process Monitoring \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAndy Jewell, Mattec Corp, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eProfit from Redesign Tooling and Leadership Change \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eWilhelm O Morgan, Kangan Batman College of Technical and Further Education, Australia \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eOptimisation of the Plastic Injection Moulding Process via Expert Systems \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003elluis Chico, Fundacion ASCAMM, Spain \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe Water Injection Technique (WIT) - Opportunities and Challenges \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eTim Jüntgen, Institute of Plastics Processing (IKV), Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eGas and Water Injection Moulding \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAndreas Janisch, Factor GmbH, Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eKoolgas: Cryogenic gas-assisted injection moulding - an alternative to conventional GAIM \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRui Magalhaes, University of Warwick, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRe-Shaping the future of Plastics (e-marketplace) \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eJoachim Franke, Omnexus, Switzerland \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe Impact of Patent Protection on the Globalization of the Mold and Hot Runner Industries \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eGeorge Olaru, Mold-Masters Ltd, Canada \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe International Capture of Intellect \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eWilhelm Morgan, Kangan Batman College of Technical and Further Education, Australia \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRecent developments in flame retardants systems to improve melt flow of thermoplastics \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRonald Wilmer, DSBG Eurobrom BV, The Netherlands \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eHybrid Technology \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eEduardo Ortiz, Bayer Hispania SA, Spain \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eApplication of co-injection process to handles for the gear lever (multi-component injection mouldng) \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRafael B Garcia-Atxabe, Fundacion GAIKER, Spain \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eIn mould painting using granular injected paint technology \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eJo C Love, University of Warwick, UK \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eSystem Solution for Decorated Mouldings by IMC \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eJoachim Berthold, Battenfield GmbH, Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe Origin of the Surface Defect 'Tiger Stripes' on Injection Moulded Products \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAnabelle Legrix, Imerys Minerals Ltd, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eSurface 'Marbling' in Mineral Filled Nylon: Origins and Solutions \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eArie Schepens, DSM Petrochemicals, The Netherlands \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eLong-term design for multi-shot moulding \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAndi Clements, Rapra Technology, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe breakthrough in Rapid Tooling - Increasing precision and efficiency in Direct Metal Laser-Sintering with 20 micron layers \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eDietmar Frank, EOS GmbH - Electro Optical Systems, Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"verdana,geneva\" style=\"font-family: verdana, geneva;\"\u003e\u003cspan size=\"1\" style=\"font-size: xx-small;\"\u003eMagics Tooling Expert \u003cbr\u003e\u003ci\u003eJohan Pauwels, Materialise, Belgium\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" align=\"center\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","published_at":"2017-06-22T21:14:37-04:00","created_at":"2017-06-22T21:14:37-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","3D simulation techniques","automotive applications","book","co-injection","cryogenic","injected paint technology","injection moulding","molding","multi component injection mouldng","optimisation","p-processing","polymer","process monitoring","surface defect","thermoset materials","tooling"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378427396,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Injection Moulding 2002, Barcelona, Spain, 18th- 19th March, 2002","public_title":null,"options":["Default Title"],"price":18000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-314-3.jpg?v=1499478985"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-314-3.jpg?v=1499478985","options":["Title"],"media":[{"alt":null,"id":356461740125,"position":1,"preview_image":{"aspect_ratio":0.715,"height":499,"width":357,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-314-3.jpg?v=1499478985"},"aspect_ratio":0.715,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-314-3.jpg?v=1499478985","width":357}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Conference Proceedings, 2002 \u003cbr\u003eISBN 978-1-85957-314-3 \u003cbr\u003e\u003cbr\u003eBarcelona, Spain, 18th- 19th March 2002\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThe comprehensive technical programme provided presentations from leading experts in the injection moulding and related fields. Papers covered material development and design solutions, optimisation of the injection moulding process through 3D simulation techniques and computer-aided engineering (CAE), issues of globalisation within the industry, opportunities provided by the internet and e-commerce, the use of gas and water assisted moulding techniques help to reduce cycle times and improve quality, and rapid tooling design and production processes. \u003cbr\u003e\u003cbr\u003eThe Injection Moulding 2002 conference provided an excellent opportunity to hear the latest injection moulding developments and gain a truly global perspective of this important industry.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003ctable cellpadding=\"0\" cellspacing=\"10\" border=\"0\" class=\"rapcss\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cp\u003e\u003cspan face=\"verdana,geneva\" style=\"font-family: verdana, geneva;\"\u003e\u003cspan size=\"1\" style=\"font-size: xx-small;\"\u003eTrue 3D Simulation Techniques of Injection Moulding and Related Processes \u003cbr\u003e\u003ci\u003eDavid Hsu, CoreTech System Co, Taiwan \u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eUsing 3D Simulation for the Optimisation of Injection Moulded Thermoset Materials for Automotive Applications \u003cbr\u003e\u003ci\u003eLothar Kallien, Sigma Engineering GmbH, Germany \u003c\/i\u003eWhy Real-time Production and Process Monitoring \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAndy Jewell, Mattec Corp, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eProfit from Redesign Tooling and Leadership Change \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eWilhelm O Morgan, Kangan Batman College of Technical and Further Education, Australia \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eOptimisation of the Plastic Injection Moulding Process via Expert Systems \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003elluis Chico, Fundacion ASCAMM, Spain \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe Water Injection Technique (WIT) - Opportunities and Challenges \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eTim Jüntgen, Institute of Plastics Processing (IKV), Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eGas and Water Injection Moulding \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAndreas Janisch, Factor GmbH, Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eKoolgas: Cryogenic gas-assisted injection moulding - an alternative to conventional GAIM \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRui Magalhaes, University of Warwick, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRe-Shaping the future of Plastics (e-marketplace) \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eJoachim Franke, Omnexus, Switzerland \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe Impact of Patent Protection on the Globalization of the Mold and Hot Runner Industries \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eGeorge Olaru, Mold-Masters Ltd, Canada \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe International Capture of Intellect \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eWilhelm Morgan, Kangan Batman College of Technical and Further Education, Australia \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRecent developments in flame retardants systems to improve melt flow of thermoplastics \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRonald Wilmer, DSBG Eurobrom BV, The Netherlands \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eHybrid Technology \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eEduardo Ortiz, Bayer Hispania SA, Spain \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eApplication of co-injection process to handles for the gear lever (multi-component injection mouldng) \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eRafael B Garcia-Atxabe, Fundacion GAIKER, Spain \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eIn mould painting using granular injected paint technology \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eJo C Love, University of Warwick, UK \u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eSystem Solution for Decorated Mouldings by IMC \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eJoachim Berthold, Battenfield GmbH, Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe Origin of the Surface Defect 'Tiger Stripes' on Injection Moulded Products \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAnabelle Legrix, Imerys Minerals Ltd, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eSurface 'Marbling' in Mineral Filled Nylon: Origins and Solutions \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eArie Schepens, DSM Petrochemicals, The Netherlands \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eLong-term design for multi-shot moulding \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eAndi Clements, Rapra Technology, UK \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"2\" face=\"verdana\" style=\"font-family: verdana; font-size: small;\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eThe breakthrough in Rapid Tooling - Increasing precision and efficiency in Direct Metal Laser-Sintering with 20 micron layers \u003cbr\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003eDietmar Frank, EOS GmbH - Electro Optical Systems, Germany \u003c\/span\u003e\u003c\/i\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"verdana,geneva\" style=\"font-family: verdana, geneva;\"\u003e\u003cspan size=\"1\" style=\"font-size: xx-small;\"\u003eMagics Tooling Expert \u003cbr\u003e\u003ci\u003eJohan Pauwels, Materialise, Belgium\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" align=\"center\"\u003e\u003cspan size=\"1\" face=\"verdana,geneva\" style=\"font-family: verdana, geneva; font-size: xx-small;\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e"}
International Resource...
$263.00
{"id":11242228676,"title":"International Resource Guide to Hazardous Chemicals","handle":"0-8155-1475-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Stanley A. Greene \u003cbr\u003eISBN 0-8155-1475-1 \u003cbr\u003e\u003cbr\u003epages 950\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book is written for safety and environmental health professionals including: industrial hygienists, safety managers, environmental specialists, safety engineers, toxicologists, chemical manufacturers and distributors, safety equipment manufacturers, waste disposal specialists, healthcare professionals including industrial nurses and physicians, and first-response personnel including police, paramedics, and firefighters. \u003cbr\u003eThe book is a direct companion to Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens in that the hazardous chemicals listed in Sittig's Handbook are the source for this guide. With more than 7,500 entries highlighting chemical producers worldwide, this international directory is a source of complete contact information for manufacturers, agencies, organizations, and useful sources of information regarding hazardous chemicals.\u003cbr\u003e\u003cstrong\u003eEach entry contains:\u003c\/strong\u003e Name, Address, Hotline, Phone, Fax, e-mail, Web Site \u003cbr\u003eManufacturers, Organizations and Government Agencies listed alphabetically by country\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nSection 1: Manufacturers of Hazardous Chemicals \u003cbr\u003eSection 2: Chemical Industry Organizations \u003cbr\u003eSection 3: Professional Environmental Health and Industrial Hygiene Organizations \u003cbr\u003eSection 4: Federal Agencies \u003cbr\u003eSection 5: Hot Lines and Useful Web Sites \u003cbr\u003eIndex of manufacturer subsidiary and division names\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nStanley A. Greene is the co-author of Hazardous Chemical Safety Guide for the Machining and Metal Working Industries and has been a publishing professional for more than 25 years. He is the former owner of Warman Publishing Company and worked for Lawyer's Cooperative Publishing Company, The Legal Intelligencer, and the Auerbach Corporation. He also worked for a major chemical company and has extensive experience in the research of scientific and regulatory aspects of chemicals, especially those of major health and environmental concern.","published_at":"2017-06-22T21:14:08-04:00","created_at":"2017-06-22T21:14:08-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","chemicals","environmental health","environmental specialists","firefighters.","industrial hygienists","nurses","paramedics","physicians","safety","safety engineers","safety equipment","toxicologists","waste disposal"],"price":26300,"price_min":26300,"price_max":26300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378397188,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"International Resource Guide to Hazardous Chemicals","public_title":null,"options":["Default Title"],"price":26300,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1475-1.jpg?v=1499479056"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1475-1.jpg?v=1499479056","options":["Title"],"media":[{"alt":null,"id":356464623709,"position":1,"preview_image":{"aspect_ratio":0.776,"height":499,"width":387,"src":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1475-1.jpg?v=1499479056"},"aspect_ratio":0.776,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/0-8155-1475-1.jpg?v=1499479056","width":387}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Stanley A. Greene \u003cbr\u003eISBN 0-8155-1475-1 \u003cbr\u003e\u003cbr\u003epages 950\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book is written for safety and environmental health professionals including: industrial hygienists, safety managers, environmental specialists, safety engineers, toxicologists, chemical manufacturers and distributors, safety equipment manufacturers, waste disposal specialists, healthcare professionals including industrial nurses and physicians, and first-response personnel including police, paramedics, and firefighters. \u003cbr\u003eThe book is a direct companion to Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens in that the hazardous chemicals listed in Sittig's Handbook are the source for this guide. With more than 7,500 entries highlighting chemical producers worldwide, this international directory is a source of complete contact information for manufacturers, agencies, organizations, and useful sources of information regarding hazardous chemicals.\u003cbr\u003e\u003cstrong\u003eEach entry contains:\u003c\/strong\u003e Name, Address, Hotline, Phone, Fax, e-mail, Web Site \u003cbr\u003eManufacturers, Organizations and Government Agencies listed alphabetically by country\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nSection 1: Manufacturers of Hazardous Chemicals \u003cbr\u003eSection 2: Chemical Industry Organizations \u003cbr\u003eSection 3: Professional Environmental Health and Industrial Hygiene Organizations \u003cbr\u003eSection 4: Federal Agencies \u003cbr\u003eSection 5: Hot Lines and Useful Web Sites \u003cbr\u003eIndex of manufacturer subsidiary and division names\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nStanley A. Greene is the co-author of Hazardous Chemical Safety Guide for the Machining and Metal Working Industries and has been a publishing professional for more than 25 years. He is the former owner of Warman Publishing Company and worked for Lawyer's Cooperative Publishing Company, The Legal Intelligencer, and the Auerbach Corporation. He also worked for a major chemical company and has extensive experience in the research of scientific and regulatory aspects of chemicals, especially those of major health and environmental concern."}
Introduction to Automo...
$144.00
{"id":11242224580,"title":"Introduction to Automotive Composites","handle":"978-1-85957-279-5","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: N. Tucker WMG, Warwick, and K. Lindsey, Gibbs Technology Ltd., Nuneaton \u003cbr\u003eISBN 978-1-85957-279-5 \u003cbr\u003e\u003cbr\u003epages: 200\n\u003ch5\u003eSummary\u003c\/h5\u003e\nComposites are being used more and more in the automotive industry, because of their strength, weight, quality and cost advantages. In 1998-1999, to further knowledge of composites, the Rover Group in conjunction with the Warwick Manufacturing Group devised a Composite Awareness course. This book is an updated and expanded version of the course notes. \u003cbr\u003e\u003cbr\u003eThis book is intended to give readers an appreciation of composites, materials properties, manufacturing technologies and the wider implications of using composites in the automotive sector. It will be useful for those already working with composites in automotive applications and for those who are considering using them in the future.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 What are Composites? \u003cbr\u003eThis chapter deals with the properties of composites, the types of composite commonly used for automotive applications and reinforcement with fibres. \u003cbr\u003e\u003cbr\u003e2 Polymer Chemistry and Physics \u003cbr\u003eThis chapter explains how polymers are formed and how the structure affects the physical and chemical properties of the resulting composite. \u003cbr\u003e\u003cbr\u003e3 Composite Ingredients \u003cbr\u003eThe differences between thermoplastics and thermosets are discussed. \u003cbr\u003e\u003cbr\u003e4 General Properties of Composites \u003cbr\u003eThe physical properties of composites, stiffness, strength, and toughness are explained and how these properties influence what sort of composite is obtained. Test methods and manufacturing methods are also covered. \u003cbr\u003e\u003cbr\u003e5 How can we use Composites in Car Manufacture? \u003cbr\u003eThe reasons for using composites are discussed. Examples are given of the use of composites in specific automotive examples. \u003cbr\u003e\u003cbr\u003e6 Manufacturing with Thermoset Composites. \u003cbr\u003eThis chapter covers manufacturing methods, such as resin infusion, pre-pregging, resin transfer moulding, structural reaction injection moulding, filament winding, and pultrusion. \u003cbr\u003e\u003cbr\u003e7 Manufacturing with Thermoplastic Composites \u003cbr\u003eThis chapter discusses manufacturing methods such as log fibre GMT and short fibre injection moulding. \u003cbr\u003e\u003cbr\u003e8 Economics of Composites Manufacture \u003cbr\u003eCovers cost analysis, comparison of materials costs and parts integration and modules. \u003cbr\u003e\u003cbr\u003e9 What to do with Composites at the end of Vehicle Life. \u003cbr\u003eMechanical and chemical recycling, thermal conversion and energy recovery are all covered in this chapter. \u003cbr\u003e\u003cbr\u003e10 The Future of Composites. \u003cbr\u003eThis chapter discusses the advantages of using composites, hypercars, and gives examples of future uses of composites indoors, bonnets and other automotive structures. \u003cbr\u003e\u003cbr\u003e11 Design Guidelines for Composites. \u003cbr\u003eThis chapter covers designing for composites, including choice of materials.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nNick Tucker's first involvement in composites was a teenager, making canoes and motorcycle parts, after several adventures in further and higher education he started his industrial career in minerals processing. After reading for a Ph.D. at the University of Bradford based on the control of a reaction injection moulding (RIM) machine, he worked as a contract researcher at PERA. He then manufactured fire-resistant polyurethane foam articles including prison mattresses and the insulating linings for the air conditioning system in Hong Kong International Airport, before moving to the Warwick Manufacturing Group, where he is now the Faraday research fellow. He is now working to provide research and development facilities for small to medium sized enterprises and researching into the manufacture of composites from sustainable origin materials. \u003cbr\u003e\u003cbr\u003eKevin Lindsey studied at Brunel University, where he gained a first-class degree in materials science. After graduation, he took up a position at ICI in the acrylics business group. During this time Kevin started work on developing resin systems for improved mechanical properties, in particular, he developed techniques investigation of fibre\/matrix interface adhesion. Kevin continued his studies in this subject at the University of Nottingham where he gained a Ph.D. in mechanical engineering. He then joined the Rover Group where he worked on research projects investigating low mass materials for vehicle bodies, including the SALVO projects with the Warwick Manufacturing Group. He is now a Principal Engineer with Gibbs Technologies Ltd., working on the development of a novel niche vehicle.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:13:55-04:00","created_at":"2017-06-22T21:13:55-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2002","book","composites","fiber","filament winding","injection moulding","materials properties","molding","p-structural","plastic","polymer","pultrusion","rubber","technology"],"price":14400,"price_min":14400,"price_max":14400,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378385476,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Introduction to Automotive Composites","public_title":null,"options":["Default Title"],"price":14400,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-279-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5_2f35f4e9-dfca-42a9-8766-e7f32404fb5a.jpg?v=1499724646"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5_2f35f4e9-dfca-42a9-8766-e7f32404fb5a.jpg?v=1499724646","options":["Title"],"media":[{"alt":null,"id":356471701597,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5_2f35f4e9-dfca-42a9-8766-e7f32404fb5a.jpg?v=1499724646"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-85957-208-5_2f35f4e9-dfca-42a9-8766-e7f32404fb5a.jpg?v=1499724646","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: N. Tucker WMG, Warwick, and K. Lindsey, Gibbs Technology Ltd., Nuneaton \u003cbr\u003eISBN 978-1-85957-279-5 \u003cbr\u003e\u003cbr\u003epages: 200\n\u003ch5\u003eSummary\u003c\/h5\u003e\nComposites are being used more and more in the automotive industry, because of their strength, weight, quality and cost advantages. In 1998-1999, to further knowledge of composites, the Rover Group in conjunction with the Warwick Manufacturing Group devised a Composite Awareness course. This book is an updated and expanded version of the course notes. \u003cbr\u003e\u003cbr\u003eThis book is intended to give readers an appreciation of composites, materials properties, manufacturing technologies and the wider implications of using composites in the automotive sector. It will be useful for those already working with composites in automotive applications and for those who are considering using them in the future.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 What are Composites? \u003cbr\u003eThis chapter deals with the properties of composites, the types of composite commonly used for automotive applications and reinforcement with fibres. \u003cbr\u003e\u003cbr\u003e2 Polymer Chemistry and Physics \u003cbr\u003eThis chapter explains how polymers are formed and how the structure affects the physical and chemical properties of the resulting composite. \u003cbr\u003e\u003cbr\u003e3 Composite Ingredients \u003cbr\u003eThe differences between thermoplastics and thermosets are discussed. \u003cbr\u003e\u003cbr\u003e4 General Properties of Composites \u003cbr\u003eThe physical properties of composites, stiffness, strength, and toughness are explained and how these properties influence what sort of composite is obtained. Test methods and manufacturing methods are also covered. \u003cbr\u003e\u003cbr\u003e5 How can we use Composites in Car Manufacture? \u003cbr\u003eThe reasons for using composites are discussed. Examples are given of the use of composites in specific automotive examples. \u003cbr\u003e\u003cbr\u003e6 Manufacturing with Thermoset Composites. \u003cbr\u003eThis chapter covers manufacturing methods, such as resin infusion, pre-pregging, resin transfer moulding, structural reaction injection moulding, filament winding, and pultrusion. \u003cbr\u003e\u003cbr\u003e7 Manufacturing with Thermoplastic Composites \u003cbr\u003eThis chapter discusses manufacturing methods such as log fibre GMT and short fibre injection moulding. \u003cbr\u003e\u003cbr\u003e8 Economics of Composites Manufacture \u003cbr\u003eCovers cost analysis, comparison of materials costs and parts integration and modules. \u003cbr\u003e\u003cbr\u003e9 What to do with Composites at the end of Vehicle Life. \u003cbr\u003eMechanical and chemical recycling, thermal conversion and energy recovery are all covered in this chapter. \u003cbr\u003e\u003cbr\u003e10 The Future of Composites. \u003cbr\u003eThis chapter discusses the advantages of using composites, hypercars, and gives examples of future uses of composites indoors, bonnets and other automotive structures. \u003cbr\u003e\u003cbr\u003e11 Design Guidelines for Composites. \u003cbr\u003eThis chapter covers designing for composites, including choice of materials.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nNick Tucker's first involvement in composites was a teenager, making canoes and motorcycle parts, after several adventures in further and higher education he started his industrial career in minerals processing. After reading for a Ph.D. at the University of Bradford based on the control of a reaction injection moulding (RIM) machine, he worked as a contract researcher at PERA. He then manufactured fire-resistant polyurethane foam articles including prison mattresses and the insulating linings for the air conditioning system in Hong Kong International Airport, before moving to the Warwick Manufacturing Group, where he is now the Faraday research fellow. He is now working to provide research and development facilities for small to medium sized enterprises and researching into the manufacture of composites from sustainable origin materials. \u003cbr\u003e\u003cbr\u003eKevin Lindsey studied at Brunel University, where he gained a first-class degree in materials science. After graduation, he took up a position at ICI in the acrylics business group. During this time Kevin started work on developing resin systems for improved mechanical properties, in particular, he developed techniques investigation of fibre\/matrix interface adhesion. Kevin continued his studies in this subject at the University of Nottingham where he gained a Ph.D. in mechanical engineering. He then joined the Rover Group where he worked on research projects investigating low mass materials for vehicle bodies, including the SALVO projects with the Warwick Manufacturing Group. He is now a Principal Engineer with Gibbs Technologies Ltd., working on the development of a novel niche vehicle.\u003cbr\u003e\u003cbr\u003e"}
Introduction to Fluoro...
$169.00
{"id":11242203268,"title":"Introduction to Fluoropolymers, 1st Edition","handle":"9781455774425","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: S Ebnesajjad \u003cbr\u003eISBN 9781455774425 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eMaterials, Technology, and Applications\u003c\/p\u003e\n\u003cp\u003ePages: 336 \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cb\u003eKey Features\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Demystifies fluoropolymers for a broad audience of engineers in areas such as product design and manufacturing.\u003cbr\u003e\u003cbr\u003e- Unlocks the potential of fluoropolymers for a wide range of applications across sectors such as aerospace, energy, and medical devices.\u003cbr\u003e\u003cbr\u003e- Ideal for both recently qualified engineers, and experienced engineers with limited experience of fluoropolymers. Also provides background knowledge for non-engineers requiring a grounding in fluoropolymers, e.g. technical management, technical sales, and support.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDr. Ebnesajjad demystifies fluoropolymers for a wide audience of designers, engineers and product designers--providing them with the toolkit required to unlock the potential of this important group of high performance polymers for applications across a wide range of market sectors: automotive, aerospace, medical devices, high performance apparel, oil \u0026amp; gas, renewable energy \/ solar photovoltaics, electronics \/ semiconductor, pharmaceuticals, chemical processing, etc.\u003cbr\u003e\u003cbr\u003eProperties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts, and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellent and flame-retardant, with unrivaled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book.\u003cbr\u003e\u003cbr\u003eThis practical guide to fluoropolymers is ideal for both recently qualified engineers and experienced engineers with limited experience of the polymer group. The material on the development of fluoropolymers and their applications will provide an easy entry point for technicians and technical sales and will also be of interest to those for whom fluoropolymers are their specialty.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nChapter 1 A Day with the Smiths: Fluoropolymers in Daily Life\u003cbr\u003eChapter 2 Fluorine and Fluorocarbons\u003cbr\u003eChapter 3 History and Applications of Fluoropolymers\u003cbr\u003eChapter 4 History and Applications of Expanded Polytetrafluoroethylene (aka Gore-Tex® Membranes\u003cbr\u003eChapter 5 History and Applications of Polyvinyl Fluoride\u003cbr\u003eChapter 6 Introduction to Tetrafluoroethylene Polymers (incl. APFO and its Replacements)\u003cbr\u003eChapter 7 Manufacturing of Polytetrafluoroethylene\u003cbr\u003eChapter 8 Fluorinated Additives\u003cbr\u003eChapter 9 Introduction to Vinylidene Fluoride Polymers\u003cbr\u003eChapter 10 Introduction to Fluoroelastomers\u003cbr\u003eChapter 11 History and Applications of Non-Stick Coatings\u003cbr\u003eChapter 12 History and Applications of Fluorinated Ionomers\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003eDr. Sina Ebnesajjad\u003c\/div\u003e\n\u003cdiv\u003eFluoroconsultants Group, Chadds Ford, Pennsylvania, U.S.A; formerly DuPont\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2017-06-22T21:12:47-04:00","created_at":"2017-06-22T21:12:47-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2013","aerospace","applications of fluoropolymers","book","energy","fluoropolymers","medical","p-chemistry","polymer"],"price":16900,"price_min":16900,"price_max":16900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378316100,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Introduction to Fluoropolymers, 1st Edition","public_title":null,"options":["Default Title"],"price":16900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"9781455774425","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: S Ebnesajjad \u003cbr\u003eISBN 9781455774425 \u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eMaterials, Technology, and Applications\u003c\/p\u003e\n\u003cp\u003ePages: 336 \u003c\/p\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cb\u003eKey Features\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e- Demystifies fluoropolymers for a broad audience of engineers in areas such as product design and manufacturing.\u003cbr\u003e\u003cbr\u003e- Unlocks the potential of fluoropolymers for a wide range of applications across sectors such as aerospace, energy, and medical devices.\u003cbr\u003e\u003cbr\u003e- Ideal for both recently qualified engineers, and experienced engineers with limited experience of fluoropolymers. Also provides background knowledge for non-engineers requiring a grounding in fluoropolymers, e.g. technical management, technical sales, and support.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDescription\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDr. Ebnesajjad demystifies fluoropolymers for a wide audience of designers, engineers and product designers--providing them with the toolkit required to unlock the potential of this important group of high performance polymers for applications across a wide range of market sectors: automotive, aerospace, medical devices, high performance apparel, oil \u0026amp; gas, renewable energy \/ solar photovoltaics, electronics \/ semiconductor, pharmaceuticals, chemical processing, etc.\u003cbr\u003e\u003cbr\u003eProperties and applications are illustrated by real-world examples as diverse as waterproof clothing, vascular grafts, and coatings for aircraft interiors. The different applications of fluoropolymers show the benefits of a group of materials that are highly water-repellent and flame-retardant, with unrivaled lubrication properties and a high level of biocompatibility. Health and safety and environmental aspects are also covered throughout the book.\u003cbr\u003e\u003cbr\u003eThis practical guide to fluoropolymers is ideal for both recently qualified engineers and experienced engineers with limited experience of the polymer group. The material on the development of fluoropolymers and their applications will provide an easy entry point for technicians and technical sales and will also be of interest to those for whom fluoropolymers are their specialty.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nChapter 1 A Day with the Smiths: Fluoropolymers in Daily Life\u003cbr\u003eChapter 2 Fluorine and Fluorocarbons\u003cbr\u003eChapter 3 History and Applications of Fluoropolymers\u003cbr\u003eChapter 4 History and Applications of Expanded Polytetrafluoroethylene (aka Gore-Tex® Membranes\u003cbr\u003eChapter 5 History and Applications of Polyvinyl Fluoride\u003cbr\u003eChapter 6 Introduction to Tetrafluoroethylene Polymers (incl. APFO and its Replacements)\u003cbr\u003eChapter 7 Manufacturing of Polytetrafluoroethylene\u003cbr\u003eChapter 8 Fluorinated Additives\u003cbr\u003eChapter 9 Introduction to Vinylidene Fluoride Polymers\u003cbr\u003eChapter 10 Introduction to Fluoroelastomers\u003cbr\u003eChapter 11 History and Applications of Non-Stick Coatings\u003cbr\u003eChapter 12 History and Applications of Fluorinated Ionomers\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003eDr. Sina Ebnesajjad\u003c\/div\u003e\n\u003cdiv\u003eFluoroconsultants Group, Chadds Ford, Pennsylvania, U.S.A; formerly DuPont\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}
Introduction to Nanote...
$155.00
{"id":11242207108,"title":"Introduction to Nanotechnology","handle":"978-0-471-07935-4","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Charles P. Poole, Jr., Frank J. Owens \u003cbr\u003eISBN 978-0-471-07935-4 \u003cbr\u003e\u003cbr\u003eHardcover\u003cbr\u003e400 pages\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis self-confessed introduction provides technical administrators and managers with a broad, practical overview of the subject and gives researchers working in different areas an appreciation of developments in nanotechnology outside their own fields of expertise.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface. \u003cbr\u003e\u003cbr\u003e1. Introduction. \u003cbr\u003e\u003cbr\u003e2. Introduction to Physics of the Solid State. \u003cbr\u003e\u003cbr\u003e3. Methods of Measuring Properties. \u003cbr\u003e\u003cbr\u003e4. Properties of Individual Nanoparticles. \u003cbr\u003e\u003cbr\u003e5. Carbon Nanostructures. \u003cbr\u003e\u003cbr\u003e6. Bulk Nanostructured Materials. \u003cbr\u003e\u003cbr\u003e7. Nanostructured Ferromagnetism. \u003cbr\u003e\u003cbr\u003e8. Optical and Vibrational Spectroscopy. \u003cbr\u003e\u003cbr\u003e9. Quantum Wells, Wires, and Dots. \u003cbr\u003e\u003cbr\u003e10. Self-Assembly and Catalysis. \u003cbr\u003e\u003cbr\u003e11. Organic Compounds and Polymers. \u003cbr\u003e\u003cbr\u003e12. Biological Materials. \u003cbr\u003e\u003cbr\u003e13. Nanomachines and Nanodevices. \u003cbr\u003e\u003cbr\u003eAppendix A: Formulas for Dimensionality. \u003cbr\u003e\u003cbr\u003eAppendix B: Tabulations of Semiconducting Material Properties. \u003cbr\u003e\u003cbr\u003eIndex.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003eCHARLES P. POOLE Jr., PhD\u003c\/strong\u003e, a professor emeritus in the Department of Physics and Astronomy at the University of South Carolina is a member of the USC nanotechnology center. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFRANK J. OWENS, PhD\u003c\/strong\u003e, is a senior research scientist of the U.S. Army s Armament Research, Development, and Engineering Center, and a professor of physics in the graduate school of Hunter College of the City University of New York.\u003cbr\u003eBoth authors are Fellows of the American Physical Society.\u003cbr\u003e\u003cbr\u003e","published_at":"2017-06-22T21:12:59-04:00","created_at":"2017-06-22T21:12:59-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2003","book","nano","nanodevices","nanomachines","nanoparticles","nanostructures","nanotechnology","organic compounds","polymers","semiconducting"],"price":15500,"price_min":15500,"price_max":15500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378324996,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Introduction to Nanotechnology","public_title":null,"options":["Default Title"],"price":15500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-471-07935-4","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-07935-4.jpg?v=1499623270"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-07935-4.jpg?v=1499623270","options":["Title"],"media":[{"alt":null,"id":358504267869,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-07935-4.jpg?v=1499623270"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-07935-4.jpg?v=1499623270","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Charles P. Poole, Jr., Frank J. Owens \u003cbr\u003eISBN 978-0-471-07935-4 \u003cbr\u003e\u003cbr\u003eHardcover\u003cbr\u003e400 pages\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis self-confessed introduction provides technical administrators and managers with a broad, practical overview of the subject and gives researchers working in different areas an appreciation of developments in nanotechnology outside their own fields of expertise.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nPreface. \u003cbr\u003e\u003cbr\u003e1. Introduction. \u003cbr\u003e\u003cbr\u003e2. Introduction to Physics of the Solid State. \u003cbr\u003e\u003cbr\u003e3. Methods of Measuring Properties. \u003cbr\u003e\u003cbr\u003e4. Properties of Individual Nanoparticles. \u003cbr\u003e\u003cbr\u003e5. Carbon Nanostructures. \u003cbr\u003e\u003cbr\u003e6. Bulk Nanostructured Materials. \u003cbr\u003e\u003cbr\u003e7. Nanostructured Ferromagnetism. \u003cbr\u003e\u003cbr\u003e8. Optical and Vibrational Spectroscopy. \u003cbr\u003e\u003cbr\u003e9. Quantum Wells, Wires, and Dots. \u003cbr\u003e\u003cbr\u003e10. Self-Assembly and Catalysis. \u003cbr\u003e\u003cbr\u003e11. Organic Compounds and Polymers. \u003cbr\u003e\u003cbr\u003e12. Biological Materials. \u003cbr\u003e\u003cbr\u003e13. Nanomachines and Nanodevices. \u003cbr\u003e\u003cbr\u003eAppendix A: Formulas for Dimensionality. \u003cbr\u003e\u003cbr\u003eAppendix B: Tabulations of Semiconducting Material Properties. \u003cbr\u003e\u003cbr\u003eIndex.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cstrong\u003eCHARLES P. POOLE Jr., PhD\u003c\/strong\u003e, a professor emeritus in the Department of Physics and Astronomy at the University of South Carolina is a member of the USC nanotechnology center. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFRANK J. OWENS, PhD\u003c\/strong\u003e, is a senior research scientist of the U.S. Army s Armament Research, Development, and Engineering Center, and a professor of physics in the graduate school of Hunter College of the City University of New York.\u003cbr\u003eBoth authors are Fellows of the American Physical Society.\u003cbr\u003e\u003cbr\u003e"}
Introduction to Plasti...
$120.00
{"id":11242216068,"title":"Introduction to Plastics Recycling, 2nd Edition","handle":"978-1-84735-078-7","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Vannessa Goodship \u003cbr\u003eISBN 978-1-84735-078-7 \u003cbr\u003e\u003cbr\u003eSoft-backed, 173 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nAlthough recycling has a long history, it is only relatively recently that environmental protection and waste management issues have come to the forefront of both public and political awareness. Outside the fields of expertise, generally little is known about either plastics or their recyclability. \u003cbr\u003e\u003cbr\u003eAs in the successful first edition, this book provides straightforward information on plastic materials and technology, including the options for recycling plastics, with a special focus on mechanical recycling. It touches on all the major problems associated with recovering and recycling plastics at a level intended to be accessible to any reader with an interest in this field, whatever their background. It also looks at some of the broader issues surrounding successful waste management of plastics. \u003cbr\u003e\u003cbr\u003eThis new edition reflects the great strides that have been made to increase recycling rates worldwide in recent years. It considers the expansion of infrastructure in the UK to support plastic recycling and major achievements that have been made in gaining widespread public support and participation for recycling schemes; specifically the need to manage waste on an individual household level. Current issues surrounding council recycling of plastic bottles, and the practice of providing free plastic carrier bags by supermarkets, are also considered. \u003cbr\u003e\u003cbr\u003eBiopolymers are expected to have a major impact on plastic markets in the future and therefore some of the issues of biodegradability versus recycling are expanded in this second edition, as is the wider context of life cycle analysis and legislation. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey features...\u003c\/strong\u003e \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eClear, easy to understand text\u003c\/li\u003e\n\u003cli\u003eWritten for a broad audience both within and outside the polymer industry\u003c\/li\u003e\n\u003cli\u003eGood introduction to plastic materials and technology with useful illustrations\u003c\/li\u003e\n\u003cli\u003eExplains recycling terminology, technology, and material quality issues\u003c\/li\u003e\n\u003cli\u003eUp-to-date information on the plastics recycling infrastructure and recent developments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nReviewed.\u003cbr\u003e\u003cbr\u003eAbout the 1st Edition\u003cbr\u003e\"...This book has been well written and great care is taken to make the information accessible. The lucid style and numerous internet based references should help any reader explore a promising area, and should, by design, lead to many returns.\" \u003cbr\u003e\u003cbr\u003eProf Roger C Hiorns \u003cbr\u003e[DOI: 10.1002\/pi.1471] \u003cbr\u003e2004 Society of Chemical Industry. Polymer International 0959–8103\/2004\u003cbr\u003e\u003cbr\u003ePreface \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1. Introduction \u003cbr\u003e\u003cbr\u003e2. Back to Basics\u003c\/strong\u003e \u003cbr\u003e2.1 Polymers \u003cbr\u003e2.2 Thermoplastics \u003cbr\u003e2.2.1 Polyolefins \u003cbr\u003e2.2.2 Polyamides \u003cbr\u003e2.3 Thermosets \u003cbr\u003e2.4 The Formulation of Plastics \u003cbr\u003e2.5 Why Does Recyclate Always Seem to be Black? \u003cbr\u003e2.6 What Are Recyclates Used For? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3. The Effects of Processing on Thermoplastics\u003c\/strong\u003e \u003cbr\u003e3.1 Rheology \u003cbr\u003e3.2 Heat \u003cbr\u003e3.3 Physical and Chemical Changes \u003cbr\u003e3.4 Assessing Property Deterioration Caused by Repeated Cycling by Injection Moulding \u003cbr\u003e3.5 Short-Term Mechanical Testing \u003cbr\u003e3.5.1 Tensile Testing \u003cbr\u003e3.5.2 Impact Testing \u003cbr\u003e3.5.3 Tensile and Impact Testing of Recycled Expanded Polystyrene \u003cbr\u003e\u003cbr\u003e4. Why Plastics Need to be Sorted \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5. Reprocessing of Thermoplastic Recyclates\u003c\/strong\u003e \u003cbr\u003e5.1 Contaminants \u003cbr\u003e5.2 Recycling Techniques \u003cbr\u003e5.3 Size Reduction \u003cbr\u003e5.4 Washing \u003cbr\u003e5.5 Identification and Sorting of Plastics \u003cbr\u003e5.6 Agglomeration \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6. Processing Techniques\u003c\/strong\u003e \u003cbr\u003e6.1 Extrusion \u003cbr\u003e6.1.1 Introduction \u003cbr\u003e6.1.2 Compounding \u003cbr\u003e6.1.3 Single-Screw Extruders \u003cbr\u003e6.1.4 Twin-Screw Extruders \u003cbr\u003e6.1.5 Co-Extrusion \u003cbr\u003e6.2 Supply Chains for Compounds \u003cbr\u003e6.3 Injection Moulding \u003cbr\u003e6.3.1 Waste During the Injection Moulding Process \u003cbr\u003e6.3.2 Co-Injection Moulding \u003cbr\u003e6.4 Blow Moulding \u003cbr\u003e6.4.1 Extrusion Blow Moulding \u003cbr\u003e6.4.2 Injection Blow Moulding \u003cbr\u003e6.5 Weld Lines \u003cbr\u003e6.6 Film Blowing \u003cbr\u003e6.7 Compression Moulding \u003cbr\u003e6.8 Thermoforming \u003cbr\u003e6.9 Processes for Incorporating Mixed Plastic Waste \u003cbr\u003e6.9.1 Intrusion Moulding \u003cbr\u003e6.9.2 Transfer Moulding \u003cbr\u003e6.9.3 Sinter Moulding \u003cbr\u003e6.10 Conclusion \u003cbr\u003e6.11 Case Study: Plastic Lumber \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7. Additives for Recyclates\u003c\/strong\u003e \u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 The Degradation of Plastics \u003cbr\u003e7.3 Restabilisation of Recyclates \u003cbr\u003e7.4 Testing the Effects of Stabilisers \u003cbr\u003e7.4.1 Processing Stability \u003cbr\u003e7.4.2 Heat Stability \u003cbr\u003e7.4.3 Light Stability \u003cbr\u003e7.5 Stabilisers \u003cbr\u003e7.5.1 Thermal Stabilisation \u003cbr\u003e7.5.2 Light Stabilisation \u003cbr\u003e7.5.3 Additive Combinations for Specific Purposes \u003cbr\u003e7.6 Modifying the Properties of Plastics Through Incorporation of Miscellaneous Additives \u003cbr\u003e7.6.1 Degradable Plastics \u003cbr\u003e7.6.2 Compatibilisers \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8. Other Methods of Recycling and Waste Disposal Options\u003c\/strong\u003e \u003cbr\u003e8.1 The Case of Thermosets \u003cbr\u003e8.2 Chemical Recycling \u003cbr\u003e8.3 Thermal Conversion Technologies \u003cbr\u003e8.3.1 Pyrolysis \u003cbr\u003e8.3.2 Hydrogenation \u003cbr\u003e8.3.3 Gasification \u003cbr\u003e8.4 Energy Recovery \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9. Creation of a Recycling and Recovery Infrastructure for Plastics \u003cbr\u003e\u003c\/strong\u003e9.1 Development \u003cbr\u003e9.2 Design for Disassembly and Recycling \u003cbr\u003e9.3 Developing Recyclate Markets \u003cbr\u003e9.4 Logistics \u003cbr\u003e9.5 Quality \u003cbr\u003e9.6 Education \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10. The Problem in Perspective: Europe\u003c\/strong\u003e \u003cbr\u003e10.1 Case Study: Packaging \u003cbr\u003e10.2 Integrated Product Policy \u003cbr\u003e10.2.1 Waste Electrical and Electronic Equipment Directive (WEEE) 2002\/96\/EC \u003cbr\u003e10.2.2 End of Life Vehicles Directive (ELV) 200\/53\/EC \u003cbr\u003e10.3 Conclusion \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11. Rise of the Biopolymers: Recycling versus Degradation\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eAbbreviations and Acronyms \u003cbr\u003eGlossary \u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDr. Vannessa Goodship is a Senior Research Fellow at The University of Warwick. She worked in the plastics industry for fourteen years prior to working at Warwick and has acted as coordinator for the UK Polymer Recycling Network. She has now worked in the field of polymer processing for over twenty-four years and has published work on a variety of plastic related subjects.","published_at":"2017-06-22T21:13:28-04:00","created_at":"2017-06-22T21:13:28-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2007","additives","biopolymers","book","plastics","polymer","processing","recycling","reprocessing","thermoplastics","waste disposal"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378356036,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Introduction to Plastics Recycling, 2nd Edition","public_title":null,"options":["Default Title"],"price":12000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Vannessa Goodship \u003cbr\u003eISBN 978-1-84735-078-7 \u003cbr\u003e\u003cbr\u003eSoft-backed, 173 pages\n\u003ch5\u003eSummary\u003c\/h5\u003e\nAlthough recycling has a long history, it is only relatively recently that environmental protection and waste management issues have come to the forefront of both public and political awareness. Outside the fields of expertise, generally little is known about either plastics or their recyclability. \u003cbr\u003e\u003cbr\u003eAs in the successful first edition, this book provides straightforward information on plastic materials and technology, including the options for recycling plastics, with a special focus on mechanical recycling. It touches on all the major problems associated with recovering and recycling plastics at a level intended to be accessible to any reader with an interest in this field, whatever their background. It also looks at some of the broader issues surrounding successful waste management of plastics. \u003cbr\u003e\u003cbr\u003eThis new edition reflects the great strides that have been made to increase recycling rates worldwide in recent years. It considers the expansion of infrastructure in the UK to support plastic recycling and major achievements that have been made in gaining widespread public support and participation for recycling schemes; specifically the need to manage waste on an individual household level. Current issues surrounding council recycling of plastic bottles, and the practice of providing free plastic carrier bags by supermarkets, are also considered. \u003cbr\u003e\u003cbr\u003eBiopolymers are expected to have a major impact on plastic markets in the future and therefore some of the issues of biodegradability versus recycling are expanded in this second edition, as is the wider context of life cycle analysis and legislation. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey features...\u003c\/strong\u003e \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eClear, easy to understand text\u003c\/li\u003e\n\u003cli\u003eWritten for a broad audience both within and outside the polymer industry\u003c\/li\u003e\n\u003cli\u003eGood introduction to plastic materials and technology with useful illustrations\u003c\/li\u003e\n\u003cli\u003eExplains recycling terminology, technology, and material quality issues\u003c\/li\u003e\n\u003cli\u003eUp-to-date information on the plastics recycling infrastructure and recent developments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nReviewed.\u003cbr\u003e\u003cbr\u003eAbout the 1st Edition\u003cbr\u003e\"...This book has been well written and great care is taken to make the information accessible. The lucid style and numerous internet based references should help any reader explore a promising area, and should, by design, lead to many returns.\" \u003cbr\u003e\u003cbr\u003eProf Roger C Hiorns \u003cbr\u003e[DOI: 10.1002\/pi.1471] \u003cbr\u003e2004 Society of Chemical Industry. Polymer International 0959–8103\/2004\u003cbr\u003e\u003cbr\u003ePreface \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1. Introduction \u003cbr\u003e\u003cbr\u003e2. Back to Basics\u003c\/strong\u003e \u003cbr\u003e2.1 Polymers \u003cbr\u003e2.2 Thermoplastics \u003cbr\u003e2.2.1 Polyolefins \u003cbr\u003e2.2.2 Polyamides \u003cbr\u003e2.3 Thermosets \u003cbr\u003e2.4 The Formulation of Plastics \u003cbr\u003e2.5 Why Does Recyclate Always Seem to be Black? \u003cbr\u003e2.6 What Are Recyclates Used For? \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e3. The Effects of Processing on Thermoplastics\u003c\/strong\u003e \u003cbr\u003e3.1 Rheology \u003cbr\u003e3.2 Heat \u003cbr\u003e3.3 Physical and Chemical Changes \u003cbr\u003e3.4 Assessing Property Deterioration Caused by Repeated Cycling by Injection Moulding \u003cbr\u003e3.5 Short-Term Mechanical Testing \u003cbr\u003e3.5.1 Tensile Testing \u003cbr\u003e3.5.2 Impact Testing \u003cbr\u003e3.5.3 Tensile and Impact Testing of Recycled Expanded Polystyrene \u003cbr\u003e\u003cbr\u003e4. Why Plastics Need to be Sorted \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5. Reprocessing of Thermoplastic Recyclates\u003c\/strong\u003e \u003cbr\u003e5.1 Contaminants \u003cbr\u003e5.2 Recycling Techniques \u003cbr\u003e5.3 Size Reduction \u003cbr\u003e5.4 Washing \u003cbr\u003e5.5 Identification and Sorting of Plastics \u003cbr\u003e5.6 Agglomeration \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e6. Processing Techniques\u003c\/strong\u003e \u003cbr\u003e6.1 Extrusion \u003cbr\u003e6.1.1 Introduction \u003cbr\u003e6.1.2 Compounding \u003cbr\u003e6.1.3 Single-Screw Extruders \u003cbr\u003e6.1.4 Twin-Screw Extruders \u003cbr\u003e6.1.5 Co-Extrusion \u003cbr\u003e6.2 Supply Chains for Compounds \u003cbr\u003e6.3 Injection Moulding \u003cbr\u003e6.3.1 Waste During the Injection Moulding Process \u003cbr\u003e6.3.2 Co-Injection Moulding \u003cbr\u003e6.4 Blow Moulding \u003cbr\u003e6.4.1 Extrusion Blow Moulding \u003cbr\u003e6.4.2 Injection Blow Moulding \u003cbr\u003e6.5 Weld Lines \u003cbr\u003e6.6 Film Blowing \u003cbr\u003e6.7 Compression Moulding \u003cbr\u003e6.8 Thermoforming \u003cbr\u003e6.9 Processes for Incorporating Mixed Plastic Waste \u003cbr\u003e6.9.1 Intrusion Moulding \u003cbr\u003e6.9.2 Transfer Moulding \u003cbr\u003e6.9.3 Sinter Moulding \u003cbr\u003e6.10 Conclusion \u003cbr\u003e6.11 Case Study: Plastic Lumber \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e7. Additives for Recyclates\u003c\/strong\u003e \u003cbr\u003e7.1 Introduction \u003cbr\u003e7.2 The Degradation of Plastics \u003cbr\u003e7.3 Restabilisation of Recyclates \u003cbr\u003e7.4 Testing the Effects of Stabilisers \u003cbr\u003e7.4.1 Processing Stability \u003cbr\u003e7.4.2 Heat Stability \u003cbr\u003e7.4.3 Light Stability \u003cbr\u003e7.5 Stabilisers \u003cbr\u003e7.5.1 Thermal Stabilisation \u003cbr\u003e7.5.2 Light Stabilisation \u003cbr\u003e7.5.3 Additive Combinations for Specific Purposes \u003cbr\u003e7.6 Modifying the Properties of Plastics Through Incorporation of Miscellaneous Additives \u003cbr\u003e7.6.1 Degradable Plastics \u003cbr\u003e7.6.2 Compatibilisers \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e8. Other Methods of Recycling and Waste Disposal Options\u003c\/strong\u003e \u003cbr\u003e8.1 The Case of Thermosets \u003cbr\u003e8.2 Chemical Recycling \u003cbr\u003e8.3 Thermal Conversion Technologies \u003cbr\u003e8.3.1 Pyrolysis \u003cbr\u003e8.3.2 Hydrogenation \u003cbr\u003e8.3.3 Gasification \u003cbr\u003e8.4 Energy Recovery \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e9. Creation of a Recycling and Recovery Infrastructure for Plastics \u003cbr\u003e\u003c\/strong\u003e9.1 Development \u003cbr\u003e9.2 Design for Disassembly and Recycling \u003cbr\u003e9.3 Developing Recyclate Markets \u003cbr\u003e9.4 Logistics \u003cbr\u003e9.5 Quality \u003cbr\u003e9.6 Education \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e10. The Problem in Perspective: Europe\u003c\/strong\u003e \u003cbr\u003e10.1 Case Study: Packaging \u003cbr\u003e10.2 Integrated Product Policy \u003cbr\u003e10.2.1 Waste Electrical and Electronic Equipment Directive (WEEE) 2002\/96\/EC \u003cbr\u003e10.2.2 End of Life Vehicles Directive (ELV) 200\/53\/EC \u003cbr\u003e10.3 Conclusion \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e11. Rise of the Biopolymers: Recycling versus Degradation\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eAbbreviations and Acronyms \u003cbr\u003eGlossary \u003cbr\u003eIndex\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nDr. Vannessa Goodship is a Senior Research Fellow at The University of Warwick. She worked in the plastics industry for fourteen years prior to working at Warwick and has acted as coordinator for the UK Polymer Recycling Network. She has now worked in the field of polymer processing for over twenty-four years and has published work on a variety of plastic related subjects."}
Introduction to Polyme...
$167.00
{"id":11242224068,"title":"Introduction to Polymer Viscoelasticity","handle":"978-0-471-74045-2","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: M. T. Shaw, W. J. MacKnight \u003cbr\u003eISBN 978-0-471-74045-2 \u003cbr\u003e\u003cbr\u003e3rd Edition, pages 316 Hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nA revised molecular approach to a classic on viscoelastic behavior. Because viscoelasticity affects the properties, appearance, processing, and performance of polymers such as rubber, plastic, and adhesives, a proper utilization of such polymers requires a clear understanding of viscoelastic behavior. Now in its third edition, Introduction to Polymer Viscoelasticity remains a classic in the literature of molecular viscoelasticity, bridging the gap between primers on polymer science and advanced research-level monographs. Assuming a molecular, rather than a mechanical approach, the text provides a strong grounding in the fundamental concepts, detailed derivations, and particular attention to assumptions, simplifications, and limitations. This Third Edition has been entirely revised and updated to reflect recent developments in the field. New chapters include:\u003cbr\u003e* Phenomenological Treatment of Viscoelasticity\u003cbr\u003e* Viscoelastic Models\u003cbr\u003e* Time-Temperature Correspondence\u003cbr\u003e* Transitions and Relaxation in Polymers\u003cbr\u003e* Elasticity of Rubbery Networks\u003cbr\u003e* Dielectric and NMR Methods\u003cbr\u003e\u003cbr\u003eWith detailed explanations, corresponding equations, and experimental methods, supported by real-life applications (as well as the inclusion of a CD-ROM with data to support the exercises), this Third Edition provides today's students and professionals with the tools they need to create polymers with more desirable qualities than ever.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction. \u003cbr\u003e\u003cbr\u003e2. Phenomenological treatment of viscoelasticity. \u003cbr\u003e\u003cbr\u003e3. Viscoelastic models. \u003cbr\u003e\u003cbr\u003e4. Time-temperature correspondence. \u003cbr\u003e\u003cbr\u003e5. Transitions and relaxation in polymers. \u003cbr\u003e\u003cbr\u003e6. Elasticity of rubbery networks. \u003cbr\u003e\u003cbr\u003e7. Dielectric and NMR methods.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nMONTGOMERY T. SHAW, Ph.D., is the A. T. DiBenedetto Distinguished Professor at the University of Connecticut in Storrs-Mansfield, Connecticut. WILLIAM J. MacKNIGHT, Ph.D., is the Wilmer D. Barrett Distinguished Professor at the University of Massachusetts Amherst and the co-Principal Investigator for the Center for UMass\/Industry Research on Polymers (CUMIRP).","published_at":"2017-06-22T21:13:54-04:00","created_at":"2017-06-22T21:13:54-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2005","book","dielectric","elasticity","general","molecular","networks","NMR","phenomenological treatment","polymers","relaxation","rubber","rubbers","viscoelastic"],"price":16700,"price_min":16700,"price_max":16700,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378382724,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Introduction to Polymer Viscoelasticity","public_title":null,"options":["Default Title"],"price":16700,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-471-74045-2","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-74045-2.jpg?v=1499727647"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-74045-2.jpg?v=1499727647","options":["Title"],"media":[{"alt":null,"id":358504300637,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-74045-2.jpg?v=1499727647"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-471-74045-2.jpg?v=1499727647","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: M. T. Shaw, W. J. MacKnight \u003cbr\u003eISBN 978-0-471-74045-2 \u003cbr\u003e\u003cbr\u003e3rd Edition, pages 316 Hardcover\n\u003ch5\u003eSummary\u003c\/h5\u003e\nA revised molecular approach to a classic on viscoelastic behavior. Because viscoelasticity affects the properties, appearance, processing, and performance of polymers such as rubber, plastic, and adhesives, a proper utilization of such polymers requires a clear understanding of viscoelastic behavior. Now in its third edition, Introduction to Polymer Viscoelasticity remains a classic in the literature of molecular viscoelasticity, bridging the gap between primers on polymer science and advanced research-level monographs. Assuming a molecular, rather than a mechanical approach, the text provides a strong grounding in the fundamental concepts, detailed derivations, and particular attention to assumptions, simplifications, and limitations. This Third Edition has been entirely revised and updated to reflect recent developments in the field. New chapters include:\u003cbr\u003e* Phenomenological Treatment of Viscoelasticity\u003cbr\u003e* Viscoelastic Models\u003cbr\u003e* Time-Temperature Correspondence\u003cbr\u003e* Transitions and Relaxation in Polymers\u003cbr\u003e* Elasticity of Rubbery Networks\u003cbr\u003e* Dielectric and NMR Methods\u003cbr\u003e\u003cbr\u003eWith detailed explanations, corresponding equations, and experimental methods, supported by real-life applications (as well as the inclusion of a CD-ROM with data to support the exercises), this Third Edition provides today's students and professionals with the tools they need to create polymers with more desirable qualities than ever.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1. Introduction. \u003cbr\u003e\u003cbr\u003e2. Phenomenological treatment of viscoelasticity. \u003cbr\u003e\u003cbr\u003e3. Viscoelastic models. \u003cbr\u003e\u003cbr\u003e4. Time-temperature correspondence. \u003cbr\u003e\u003cbr\u003e5. Transitions and relaxation in polymers. \u003cbr\u003e\u003cbr\u003e6. Elasticity of rubbery networks. \u003cbr\u003e\u003cbr\u003e7. Dielectric and NMR methods.\u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\nMONTGOMERY T. SHAW, Ph.D., is the A. T. DiBenedetto Distinguished Professor at the University of Connecticut in Storrs-Mansfield, Connecticut. WILLIAM J. MacKNIGHT, Ph.D., is the Wilmer D. Barrett Distinguished Professor at the University of Massachusetts Amherst and the co-Principal Investigator for the Center for UMass\/Industry Research on Polymers (CUMIRP)."}
Introduction to Surfac...
$195.00
{"id":11242203972,"title":"Introduction to Surface Engineering and Functionally Engineered Materials","handle":"978-0-470-63927-6","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Peter Martin \u003cbr\u003eISBN 978-0-470-63927-6 \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003eHardcover\u003c\/div\u003e\n\u003cdiv\u003e584 pages\u003c\/div\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book provides a clear and understandable text for users and developers of advanced engineered materials, particularly in the area of thin films, and addresses fundamentals of modifying the optical, electrical, photo-electric, tribological, and corrosion resistance of solid surfaces and adding functionality to solids by engineering their surface, structure, and electronic, magnetic and optical structure. Thin film applications are emphasized. Through the inclusion of multiple clear examples of the technologies, how to use them, and the synthesis processes involved, the reader will gain a deep understanding of the purpose, goals, and methodology of surface engineering and engineered materials.\u003cbr\u003e\u003cbr\u003eVirtually every advance in thin film, energy, medical, tribological materials technologies has resulted from surface engineering and engineered materials. Surface engineering involves structures and compositions not found naturally in solids and is used to modify the surface properties of solids and involves the application of thin film coatings, surface functionalization and activation, and plasma treatment. Engineered materials are the future of thin film technology. Engineered structures such as superlattices, nanolaminates, nanotubes, nanocomposites, smart materials, photonic bandgap materials, metamaterials, molecularly doped polymers and structured materials all have the capacity to expand and increase the functionality of thin films and coatings used in a variety of applications and provide new applications. New advanced deposition processes and hybrid processes are being used and developed to deposit advanced thin film materials and structures not possible with conventional techniques a decade ago. Properties can now be engineered into thin films that achieve performance not possible a decade ago.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1.0 Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.1 Introduction.\u003cbr\u003e\u003cbr\u003e1.2 Tribological Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.3 Optical Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.4 Electrical and Opto-electronic Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.5 Corrosion of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e2.0 Thin Film Deposition Processes.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e2.1 Physical Vapor Deposition.\u003cbr\u003e\u003cbr\u003e2.2 Chemical Vapor Deposition.\u003cbr\u003e\u003cbr\u003e2.3 Pulsed Laser Deposition.\u003cbr\u003e\u003cbr\u003e2.4 Hybrid Deposition Processes.\u003cbr\u003e\u003cbr\u003e3.0 Thin Film Structures and Defects.\u003cbr\u003e\u003cbr\u003e3.1 Thin Film Nucleation and Growth.\u003cbr\u003e\u003cbr\u003e3.2 Structure of Thin Films.\u003cbr\u003e\u003cbr\u003e3.3 Thin Film Structure Zone Models.\u003cbr\u003e\u003cbr\u003e4. Thin Film Tribological Materials.\u003cbr\u003e\u003cbr\u003e4.1 Wear Resistant Thin Film Materials.\u003cbr\u003e\u003cbr\u003e4.2 Ultrifunctional Nanostructured, Nanolaminate and Nanocomposite Triboligical Materials.\u003cbr\u003e\u003cbr\u003e5. Optical Thin Films and Composites.\u003cbr\u003e\u003cbr\u003e5.1 Optical Properties at an Interface.\u003cbr\u003e\u003cbr\u003e5.2 Single Layer Optical Coatings.\u003cbr\u003e\u003cbr\u003e5.3 Multilayer Thin Film Optical Coatings.\u003cbr\u003e\u003cbr\u003e5.4 Color and Chromaticity in Thin Films.\u003cbr\u003e\u003cbr\u003e5.5 Decorative and Architectural Coatings.\u003cbr\u003e\u003cbr\u003e6.0 Fabrication Processes for Electrical and Electro-Optical Thin Films.\u003cbr\u003e\u003cbr\u003e6.1 Plasma Processing: Introduction.\u003cbr\u003e\u003cbr\u003e6.2 Etching Processes.\u003cbr\u003e\u003cbr\u003e6.3 Wet Chemical Etching.\u003cbr\u003e\u003cbr\u003e6.4 Metallization.\u003cbr\u003e\u003cbr\u003e6.5 Photolithography.\u003cbr\u003e\u003cbr\u003e6.6 Deposition Process for Piezoelectric and Ferroelectric Thin Films.\u003cbr\u003e\u003cbr\u003e6.7 Deposition Processes for Semiconductor Thin Films.\u003cbr\u003e\u003cbr\u003e7.0 Functionally Engineered Materials.\u003cbr\u003e\u003cbr\u003e7.1 Energy Band Structure of Solids.\u003cbr\u003e\u003cbr\u003e7.2 Low Dimensional Structures.\u003cbr\u003e\u003cbr\u003e7.3 Energy Band Engineering.\u003cbr\u003e\u003cbr\u003e7.4 Artificially Structured and Sculpted Micro and NanoStructures.\u003cbr\u003e\u003cbr\u003e8.0 Multifunctional Surface Engineering Applications.\u003cbr\u003e\u003cbr\u003e8.1 Thin Film Photovoltaics.\u003cbr\u003e\u003cbr\u003e8.2 Transparent Conductive Oxide Thin Films.\u003cbr\u003e\u003cbr\u003e8.3 Electrochromic and Thermochromic Coatings.\u003cbr\u003e\u003cbr\u003e8.4 Thin Film Permeation barriers.\u003cbr\u003e\u003cbr\u003e8.5 Photocatalytic Thin Films and Low Dimensional Structures.\u003cbr\u003e\u003cbr\u003e8.6 Frequency selective surfaces.\u003cbr\u003e\u003cbr\u003e9.0 Looking into the Future: Bio-Inspired Materials and Surfaces.\u003cbr\u003e\u003cbr\u003e9.1 Functional Biomaterials.\u003cbr\u003e\u003cbr\u003e9.2 Functional Biomaterials: Self Cleaning Biological Materials.\u003cbr\u003e\u003cbr\u003e9.3 Functional Biomaterials: Self Healing Biological Materials.\u003cbr\u003e\u003cbr\u003e9.4 Self Assembled and Composite Nanostructures.\u003cbr\u003e\u003cbr\u003e9.5 Introduction to Biophotonics.\u003cbr\u003e\u003cbr\u003e9.6 Advanced Biophotonics Applications. \n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003ePeter Martin worked at Battelle, Pacific Northwest Laboratory (BNW) for over 29 years where he currently holds an Emeritus Laboratory Fellow appointment, and specializes in developing thin film coatings for energy, biomedical, space and defense applications. He pioneered the use of reactive magnetron sputtering technology to fabricate novel and advanced optical coating materials and specializes in large area optical and thin film coating development. He has also led the development of high performance large area ground-based and space-based laser mirrors for DOD applications.\u003c\/div\u003e\n\u003cdiv\u003eDr. Martin has written over 400 technical publications. He has won three R\u0026amp;D 100 Awards for his work in microfabrication and barrier coatings for flat panel displays, has two FLC awards, was awarded Battelle Technology of the Year (2003) for his work with the photolytic artificial lung, and voted Distinguished Inventor and PNNL 2005 Inventor of the Year. He has 26 US patents and numerous foreign and pending patents. He also teaches short courses on smart materials and energy materials and applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","published_at":"2017-06-22T21:12:49-04:00","created_at":"2017-06-22T21:12:49-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2011","biomaterials","biophotonics","book","coatings","material","nanostructure","optical","plasma","solid surface","surface","tin film","vapor"],"price":19500,"price_min":19500,"price_max":19500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378316804,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Introduction to Surface Engineering and Functionally Engineered Materials","public_title":null,"options":["Default Title"],"price":19500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-470-63927-6","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-63927-6.jpg?v=1499623547"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-63927-6.jpg?v=1499623547","options":["Title"],"media":[{"alt":null,"id":358504333405,"position":1,"preview_image":{"aspect_ratio":0.627,"height":499,"width":313,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-63927-6.jpg?v=1499623547"},"aspect_ratio":0.627,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-470-63927-6.jpg?v=1499623547","width":313}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Peter Martin \u003cbr\u003eISBN 978-0-470-63927-6 \u003cbr\u003e\u003cbr\u003e\n\u003cdiv\u003eHardcover\u003c\/div\u003e\n\u003cdiv\u003e584 pages\u003c\/div\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThis book provides a clear and understandable text for users and developers of advanced engineered materials, particularly in the area of thin films, and addresses fundamentals of modifying the optical, electrical, photo-electric, tribological, and corrosion resistance of solid surfaces and adding functionality to solids by engineering their surface, structure, and electronic, magnetic and optical structure. Thin film applications are emphasized. Through the inclusion of multiple clear examples of the technologies, how to use them, and the synthesis processes involved, the reader will gain a deep understanding of the purpose, goals, and methodology of surface engineering and engineered materials.\u003cbr\u003e\u003cbr\u003eVirtually every advance in thin film, energy, medical, tribological materials technologies has resulted from surface engineering and engineered materials. Surface engineering involves structures and compositions not found naturally in solids and is used to modify the surface properties of solids and involves the application of thin film coatings, surface functionalization and activation, and plasma treatment. Engineered materials are the future of thin film technology. Engineered structures such as superlattices, nanolaminates, nanotubes, nanocomposites, smart materials, photonic bandgap materials, metamaterials, molecularly doped polymers and structured materials all have the capacity to expand and increase the functionality of thin films and coatings used in a variety of applications and provide new applications. New advanced deposition processes and hybrid processes are being used and developed to deposit advanced thin film materials and structures not possible with conventional techniques a decade ago. Properties can now be engineered into thin films that achieve performance not possible a decade ago.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1.0 Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.1 Introduction.\u003cbr\u003e\u003cbr\u003e1.2 Tribological Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.3 Optical Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.4 Electrical and Opto-electronic Properties of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e1.5 Corrosion of Solid Surfaces.\u003cbr\u003e\u003cbr\u003e2.0 Thin Film Deposition Processes.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e2.1 Physical Vapor Deposition.\u003cbr\u003e\u003cbr\u003e2.2 Chemical Vapor Deposition.\u003cbr\u003e\u003cbr\u003e2.3 Pulsed Laser Deposition.\u003cbr\u003e\u003cbr\u003e2.4 Hybrid Deposition Processes.\u003cbr\u003e\u003cbr\u003e3.0 Thin Film Structures and Defects.\u003cbr\u003e\u003cbr\u003e3.1 Thin Film Nucleation and Growth.\u003cbr\u003e\u003cbr\u003e3.2 Structure of Thin Films.\u003cbr\u003e\u003cbr\u003e3.3 Thin Film Structure Zone Models.\u003cbr\u003e\u003cbr\u003e4. Thin Film Tribological Materials.\u003cbr\u003e\u003cbr\u003e4.1 Wear Resistant Thin Film Materials.\u003cbr\u003e\u003cbr\u003e4.2 Ultrifunctional Nanostructured, Nanolaminate and Nanocomposite Triboligical Materials.\u003cbr\u003e\u003cbr\u003e5. Optical Thin Films and Composites.\u003cbr\u003e\u003cbr\u003e5.1 Optical Properties at an Interface.\u003cbr\u003e\u003cbr\u003e5.2 Single Layer Optical Coatings.\u003cbr\u003e\u003cbr\u003e5.3 Multilayer Thin Film Optical Coatings.\u003cbr\u003e\u003cbr\u003e5.4 Color and Chromaticity in Thin Films.\u003cbr\u003e\u003cbr\u003e5.5 Decorative and Architectural Coatings.\u003cbr\u003e\u003cbr\u003e6.0 Fabrication Processes for Electrical and Electro-Optical Thin Films.\u003cbr\u003e\u003cbr\u003e6.1 Plasma Processing: Introduction.\u003cbr\u003e\u003cbr\u003e6.2 Etching Processes.\u003cbr\u003e\u003cbr\u003e6.3 Wet Chemical Etching.\u003cbr\u003e\u003cbr\u003e6.4 Metallization.\u003cbr\u003e\u003cbr\u003e6.5 Photolithography.\u003cbr\u003e\u003cbr\u003e6.6 Deposition Process for Piezoelectric and Ferroelectric Thin Films.\u003cbr\u003e\u003cbr\u003e6.7 Deposition Processes for Semiconductor Thin Films.\u003cbr\u003e\u003cbr\u003e7.0 Functionally Engineered Materials.\u003cbr\u003e\u003cbr\u003e7.1 Energy Band Structure of Solids.\u003cbr\u003e\u003cbr\u003e7.2 Low Dimensional Structures.\u003cbr\u003e\u003cbr\u003e7.3 Energy Band Engineering.\u003cbr\u003e\u003cbr\u003e7.4 Artificially Structured and Sculpted Micro and NanoStructures.\u003cbr\u003e\u003cbr\u003e8.0 Multifunctional Surface Engineering Applications.\u003cbr\u003e\u003cbr\u003e8.1 Thin Film Photovoltaics.\u003cbr\u003e\u003cbr\u003e8.2 Transparent Conductive Oxide Thin Films.\u003cbr\u003e\u003cbr\u003e8.3 Electrochromic and Thermochromic Coatings.\u003cbr\u003e\u003cbr\u003e8.4 Thin Film Permeation barriers.\u003cbr\u003e\u003cbr\u003e8.5 Photocatalytic Thin Films and Low Dimensional Structures.\u003cbr\u003e\u003cbr\u003e8.6 Frequency selective surfaces.\u003cbr\u003e\u003cbr\u003e9.0 Looking into the Future: Bio-Inspired Materials and Surfaces.\u003cbr\u003e\u003cbr\u003e9.1 Functional Biomaterials.\u003cbr\u003e\u003cbr\u003e9.2 Functional Biomaterials: Self Cleaning Biological Materials.\u003cbr\u003e\u003cbr\u003e9.3 Functional Biomaterials: Self Healing Biological Materials.\u003cbr\u003e\u003cbr\u003e9.4 Self Assembled and Composite Nanostructures.\u003cbr\u003e\u003cbr\u003e9.5 Introduction to Biophotonics.\u003cbr\u003e\u003cbr\u003e9.6 Advanced Biophotonics Applications. \n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003ePeter Martin worked at Battelle, Pacific Northwest Laboratory (BNW) for over 29 years where he currently holds an Emeritus Laboratory Fellow appointment, and specializes in developing thin film coatings for energy, biomedical, space and defense applications. He pioneered the use of reactive magnetron sputtering technology to fabricate novel and advanced optical coating materials and specializes in large area optical and thin film coating development. He has also led the development of high performance large area ground-based and space-based laser mirrors for DOD applications.\u003c\/div\u003e\n\u003cdiv\u003eDr. Martin has written over 400 technical publications. He has won three R\u0026amp;D 100 Awards for his work in microfabrication and barrier coatings for flat panel displays, has two FLC awards, was awarded Battelle Technology of the Year (2003) for his work with the photolytic artificial lung, and voted Distinguished Inventor and PNNL 2005 Inventor of the Year. He has 26 US patents and numerous foreign and pending patents. He also teaches short courses on smart materials and energy materials and applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e"}
Joining of Plastics
$72.00
{"id":11242254020,"title":"Joining of Plastics","handle":"978-0-08041964-0","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: K.W. Allen \u003cbr\u003eISBN 978-0-08041964-0 \u003cbr\u003e\u003cbr\u003eCity University, Oxford Polytechnic\u003cbr\u003eReview Report\u003cbr\u003e\u003cbr\u003e86 pages, softbound\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nMechanical fastening, welding and adhesive bonding is reviewed in this report. Selection of joining method is evaluated from the point of view of durability of joint required for application. The report considers the most important thermoplastic materials and explains the characteristics which affect the choice of pretreatment, joining method and adhesives. Thermosetting materials are considered as a single group with respect to bonding. Some 387 abstracts were selected to provide additional information. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e PE, PP, PS, ABS, PVAc, PVC, PC, PA, PMA, PMMA, PTFE, thermosets \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFrom the Table of Contents:\u003c\/strong\u003e \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe Technology of Joining\u003c\/li\u003e\n\u003cli\u003eSurface Treatment\u003c\/li\u003e\n\u003cli\u003eTypes of Plastics\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-06-22T21:15:27-04:00","created_at":"2017-06-22T21:15:27-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["1992","ABS","book","general","PA","PC","PE","PMA","PMMA","PP","PS","PTFE","PVAc","PVC","thermosets"],"price":7200,"price_min":7200,"price_max":7200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378488644,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Joining of Plastics","public_title":null,"options":["Default Title"],"price":7200,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-08041964-0","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-08041964-0.jpg?v=1499623799"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08041964-0.jpg?v=1499623799","options":["Title"],"media":[{"alt":null,"id":358506266717,"position":1,"preview_image":{"aspect_ratio":0.667,"height":1500,"width":1000,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08041964-0.jpg?v=1499623799"},"aspect_ratio":0.667,"height":1500,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-08041964-0.jpg?v=1499623799","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: K.W. Allen \u003cbr\u003eISBN 978-0-08041964-0 \u003cbr\u003e\u003cbr\u003eCity University, Oxford Polytechnic\u003cbr\u003eReview Report\u003cbr\u003e\u003cbr\u003e86 pages, softbound\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nMechanical fastening, welding and adhesive bonding is reviewed in this report. Selection of joining method is evaluated from the point of view of durability of joint required for application. The report considers the most important thermoplastic materials and explains the characteristics which affect the choice of pretreatment, joining method and adhesives. Thermosetting materials are considered as a single group with respect to bonding. Some 387 abstracts were selected to provide additional information. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMaterials:\u003c\/strong\u003e PE, PP, PS, ABS, PVAc, PVC, PC, PA, PMA, PMMA, PTFE, thermosets \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFrom the Table of Contents:\u003c\/strong\u003e \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe Technology of Joining\u003c\/li\u003e\n\u003cli\u003eSurface Treatment\u003c\/li\u003e\n\u003cli\u003eTypes of Plastics\u003c\/li\u003e\n\u003c\/ul\u003e"}
Joining Plastics 2006
$180.00
{"id":11242250116,"title":"Joining Plastics 2006","handle":"978-1-85957-570-3","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Rapra Conference \u003cbr\u003eISBN 978-1-85957-570-3 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cdiv\u003eManufacturing with plastics often involves a bonding step from packaging, electronic and medical devices to large scale automotive, aerospace and construction projects. This is a continually developing field and experts at this second international conference on joining plastics debated the best methods and options for different applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eSponsored by The National Physical Laboratory, TWI Limited and Faraday Plastics this conference was an excellent opportunity for plastics manufacturers, design engineers and product developers to talk to experts in the field and discuss the latest developments.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nSESSION 1. ADHESIVES\u003cbr\u003eDr. Ewen Kellar, TWI Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 1: Bonding Plastics Stuck for a solution\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 2: Joining of plastics by adhesive bonding in automotive engineering\u003cbr\u003eDr. Hartwig Lohse, Ashland - Drew Ameroid Deutschland GmbH, Germany \u0026amp; Stephen Pitman, Ashland UK Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 3: New silicone reactive hot melt for plastic bonding\u003cbr\u003eDr. Patrick Vandereecken (Belgium), Dr. Loren Lower (USA), Dr. Klaus Kunz (Germany) \u0026amp; Ross Noel (USA), Dow Corning\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 4: Industrial applications bonding plastics with cyanoacrylates and UV curing adhesives\u003cbr\u003eBob Goss, Henkel Loctite Adhesives Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 2. ADHESIVE TESTING\u003cbr\u003eDr. William Broughton, National Physical Laboratory, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 5: A guide to adhesive testing\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 3. INFRARED WELDING, RESISTANCE WELDING, AND HOT PLATE WELDING\u003cbr\u003eProf Yasuo Kurosaki, University of Electro-Communications, Tomoya Matayoshi, Mitsui Chemicals Inc. \u0026amp; Kimitoshi Sato, Hiroshima Institute of Technology, Japan\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 6: An infrared radiation welding of natural thermoplastics using a solid heat sink without causing surface thermal damage\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 7: Innovations and potentials of high-speed hotplate welding\u003cbr\u003eProf Dr. Helmut Potente, Dr. Joachim Schnieders \u0026amp; Maik Bssing, University of Paderborn, Germany\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 4. COMPOSITE JOINTS\u003cbr\u003eGina Gohorianu, Robert Pique \u0026amp; Frdric Lachaud, ENSICA \u0026amp; Jean-Jacques Barrau, Paul Sabatier University, France\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 8: Composite bolted joints behaviour: Effects of hole machining defects\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 9: Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency\u003cbr\u003eDr. Geoff Turvey, Lancaster University, UK \u0026amp; P Wang, Schlumberger, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 10: Energy absorbing joints between fibre reinforced plastics and metals\u003cbr\u003eDr. Ewen Kellar \u0026amp; Dr. Faye Smith, TWI Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 5. RESISTANCE WELDING\u003cbr\u003eDr. Ali Yousefpour, Marc-Andr Octeau \u0026amp; Mehdi Hojjati, Institute for Aerospace Research, Canada\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 11 Resistance welding of thermoplastic composites using metal mesh heating elements\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 6. PRETREATMENT\u003cbr\u003ePaul Lippens, Europlasma NV, Belgium\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 12: Vacuum plasma pre-treatment enhances adhesive bonding of plastics in an environmentally friendly and cost-effective way\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 13: Surface treatment \u0026amp; engineering of plastics by online atmospheric plasma for industrial applications\u003cbr\u003eDr. Bhukan Parbhoo, Surface Chemistry Performance, UK \u0026amp; Dr.Thierry Sindzingre, Mr. Mathieu Thomachot \u0026amp; Ms. Eva Jouvet, AcXys Technologies, France\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 7. BONDING FLUOROPLASTICS\u003cbr\u003eDr. Derek Brewis \u0026amp; Dr. Ralf Dahm, Loughborough University, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 14: Adhesion to Fluoropolymers\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 8. ULTRASONIC WELDING AND VIBRATION WELDING\u003cbr\u003ePeter Wells, Branson Ultrasonics, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 15: Ultrasonic \u0026amp; linear vibration welding of plastics - process selection \u0026amp; part design\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 16: Innovative component and joint designs for successful ultrasonic welding and joining of thermoplastics\u003cbr\u003eDr. Frank Rawson \u0026amp; Sue Osborne, FFR Ultrasonics Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 9. HEATED TOOL WELDING\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 17: Influence of internal properties to the weld seam quality\u003cbr\u003eProf. Dr.- Ing. Schmachtenberg, Dr.-Ing. Reiner Luetzeler \u0026amp; Dr.-Ing. Carsten Tuechert, Aachen University of Technology, Germany\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 10. LASER WELDING\u003cbr\u003eDr. Marcus Warwick \u0026amp; Marcus Gordon, TWI Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 18: Application studies using through-transmission laser welding of polymers\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 19: Laser welding of plastics - process and production technology\u003cbr\u003eDr. Dirk Hnsch, ProLas GmbH, Germany\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 20: Creating transparent laser weldings on thermoplastic components\u003cbr\u003eDr-Ing Rolf Klein \u0026amp; Dr. Gareth McGrath (UK), Gentex Corporation, USA\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 21: Engineering plastics for laser welding\u003cbr\u003eEric van der Vegte \u0026amp; Dr Marnix van Gurp, DSM Engineering Plastics \u0026amp; Hans Hoekstra \u0026amp; Dr Alexa","published_at":"2017-06-22T21:15:15-04:00","created_at":"2017-06-22T21:15:15-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2006","adhesion","bonding","bonding fluoroplastics","book","laser welding","p-applications","plastics","polymer","surface","welding"],"price":18000,"price_min":18000,"price_max":18000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378471236,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Joining Plastics 2006","public_title":null,"options":["Default Title"],"price":18000,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-85957-570-3","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":[],"featured_image":null,"options":["Title"],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Rapra Conference \u003cbr\u003eISBN 978-1-85957-570-3 \u003cbr\u003e\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cdiv\u003eManufacturing with plastics often involves a bonding step from packaging, electronic and medical devices to large scale automotive, aerospace and construction projects. This is a continually developing field and experts at this second international conference on joining plastics debated the best methods and options for different applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eSponsored by The National Physical Laboratory, TWI Limited and Faraday Plastics this conference was an excellent opportunity for plastics manufacturers, design engineers and product developers to talk to experts in the field and discuss the latest developments.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\nSESSION 1. ADHESIVES\u003cbr\u003eDr. Ewen Kellar, TWI Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 1: Bonding Plastics Stuck for a solution\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 2: Joining of plastics by adhesive bonding in automotive engineering\u003cbr\u003eDr. Hartwig Lohse, Ashland - Drew Ameroid Deutschland GmbH, Germany \u0026amp; Stephen Pitman, Ashland UK Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 3: New silicone reactive hot melt for plastic bonding\u003cbr\u003eDr. Patrick Vandereecken (Belgium), Dr. Loren Lower (USA), Dr. Klaus Kunz (Germany) \u0026amp; Ross Noel (USA), Dow Corning\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 4: Industrial applications bonding plastics with cyanoacrylates and UV curing adhesives\u003cbr\u003eBob Goss, Henkel Loctite Adhesives Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 2. ADHESIVE TESTING\u003cbr\u003eDr. William Broughton, National Physical Laboratory, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 5: A guide to adhesive testing\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 3. INFRARED WELDING, RESISTANCE WELDING, AND HOT PLATE WELDING\u003cbr\u003eProf Yasuo Kurosaki, University of Electro-Communications, Tomoya Matayoshi, Mitsui Chemicals Inc. \u0026amp; Kimitoshi Sato, Hiroshima Institute of Technology, Japan\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 6: An infrared radiation welding of natural thermoplastics using a solid heat sink without causing surface thermal damage\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 7: Innovations and potentials of high-speed hotplate welding\u003cbr\u003eProf Dr. Helmut Potente, Dr. Joachim Schnieders \u0026amp; Maik Bssing, University of Paderborn, Germany\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 4. COMPOSITE JOINTS\u003cbr\u003eGina Gohorianu, Robert Pique \u0026amp; Frdric Lachaud, ENSICA \u0026amp; Jean-Jacques Barrau, Paul Sabatier University, France\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 8: Composite bolted joints behaviour: Effects of hole machining defects\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 9: Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency\u003cbr\u003eDr. Geoff Turvey, Lancaster University, UK \u0026amp; P Wang, Schlumberger, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 10: Energy absorbing joints between fibre reinforced plastics and metals\u003cbr\u003eDr. Ewen Kellar \u0026amp; Dr. Faye Smith, TWI Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 5. RESISTANCE WELDING\u003cbr\u003eDr. Ali Yousefpour, Marc-Andr Octeau \u0026amp; Mehdi Hojjati, Institute for Aerospace Research, Canada\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 11 Resistance welding of thermoplastic composites using metal mesh heating elements\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 6. PRETREATMENT\u003cbr\u003ePaul Lippens, Europlasma NV, Belgium\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 12: Vacuum plasma pre-treatment enhances adhesive bonding of plastics in an environmentally friendly and cost-effective way\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 13: Surface treatment \u0026amp; engineering of plastics by online atmospheric plasma for industrial applications\u003cbr\u003eDr. Bhukan Parbhoo, Surface Chemistry Performance, UK \u0026amp; Dr.Thierry Sindzingre, Mr. Mathieu Thomachot \u0026amp; Ms. Eva Jouvet, AcXys Technologies, France\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 7. BONDING FLUOROPLASTICS\u003cbr\u003eDr. Derek Brewis \u0026amp; Dr. Ralf Dahm, Loughborough University, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 14: Adhesion to Fluoropolymers\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 8. ULTRASONIC WELDING AND VIBRATION WELDING\u003cbr\u003ePeter Wells, Branson Ultrasonics, UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 15: Ultrasonic \u0026amp; linear vibration welding of plastics - process selection \u0026amp; part design\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 16: Innovative component and joint designs for successful ultrasonic welding and joining of thermoplastics\u003cbr\u003eDr. Frank Rawson \u0026amp; Sue Osborne, FFR Ultrasonics Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 9. HEATED TOOL WELDING\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 17: Influence of internal properties to the weld seam quality\u003cbr\u003eProf. Dr.- Ing. Schmachtenberg, Dr.-Ing. Reiner Luetzeler \u0026amp; Dr.-Ing. Carsten Tuechert, Aachen University of Technology, Germany\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSESSION 10. LASER WELDING\u003cbr\u003eDr. Marcus Warwick \u0026amp; Marcus Gordon, TWI Ltd., UK\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 18: Application studies using through-transmission laser welding of polymers\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 19: Laser welding of plastics - process and production technology\u003cbr\u003eDr. Dirk Hnsch, ProLas GmbH, Germany\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 20: Creating transparent laser weldings on thermoplastic components\u003cbr\u003eDr-Ing Rolf Klein \u0026amp; Dr. Gareth McGrath (UK), Gentex Corporation, USA\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePaper 21: Engineering plastics for laser welding\u003cbr\u003eEric van der Vegte \u0026amp; Dr Marnix van Gurp, DSM Engineering Plastics \u0026amp; Hans Hoekstra \u0026amp; Dr Alexa"}
Light-Associated React...
$149.00
{"id":11242233476,"title":"Light-Associated Reactions of Synthetic Polymers","handle":"978-0-387-31803-5","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: A. Ravve \u003cbr\u003eISBN 978-0-387-31803-5 \u003cbr\u003e\u003cbr\u003eSpringer \u003cbr\u003e\u003cbr\u003epages 369, Hardcover\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPhoto associated reactions and light responsive materials have great potential to improve existing industrial processes, including liquid crystal alignment and capturing solar energy. This book presents a range of reactions and materials with some of the most exciting current and future applications. It includes a brief introduction to photochemistry; in-depth discussion of photosensitizers, photoinititiators, and the processes of light curing and crosslinking; listing of light responsive polymers and their uses; and a discussion of polymeric materials for use in non-linear optics.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eIntroduction.\u003c\/p\u003e\n\u003cp\u003e- Photosensitizers and Photoinitiators.\u003c\/p\u003e\n\u003cp\u003e- Chemistry of Photo-Curable Compositions.\u003c\/p\u003e\n\u003cp\u003e- Photo-Crosslinkable Polymers.\u003c\/p\u003e\n\u003cp\u003e- Photo-Responsive Polymers.\u003c\/p\u003e\n\u003cp\u003e- Photo-Refractive Polymers for Nonlinear Optics.\u003c\/p\u003e","published_at":"2017-06-22T21:14:23-04:00","created_at":"2017-06-22T21:14:23-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2006","book","compositions","crosslinking","curing","nonlinear optics","p-properties","photo-crosslinkable","photo-refractive","photoinitiators","photosensitizers","poly","polymers","solar energy"],"price":14900,"price_min":14900,"price_max":14900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378413828,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Light-Associated Reactions of Synthetic Polymers","public_title":null,"options":["Default Title"],"price":14900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-0-387-31803-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-0-387-31803-5.jpg?v=1499624044"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-387-31803-5.jpg?v=1499624044","options":["Title"],"media":[{"alt":null,"id":358506692701,"position":1,"preview_image":{"aspect_ratio":0.653,"height":499,"width":326,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-387-31803-5.jpg?v=1499624044"},"aspect_ratio":0.653,"height":499,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-0-387-31803-5.jpg?v=1499624044","width":326}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: A. Ravve \u003cbr\u003eISBN 978-0-387-31803-5 \u003cbr\u003e\u003cbr\u003eSpringer \u003cbr\u003e\u003cbr\u003epages 369, Hardcover\u003cbr\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\nPhoto associated reactions and light responsive materials have great potential to improve existing industrial processes, including liquid crystal alignment and capturing solar energy. This book presents a range of reactions and materials with some of the most exciting current and future applications. It includes a brief introduction to photochemistry; in-depth discussion of photosensitizers, photoinititiators, and the processes of light curing and crosslinking; listing of light responsive polymers and their uses; and a discussion of polymeric materials for use in non-linear optics.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n\u003cp\u003eIntroduction.\u003c\/p\u003e\n\u003cp\u003e- Photosensitizers and Photoinitiators.\u003c\/p\u003e\n\u003cp\u003e- Chemistry of Photo-Curable Compositions.\u003c\/p\u003e\n\u003cp\u003e- Photo-Crosslinkable Polymers.\u003c\/p\u003e\n\u003cp\u003e- Photo-Responsive Polymers.\u003c\/p\u003e\n\u003cp\u003e- Photo-Refractive Polymers for Nonlinear Optics.\u003c\/p\u003e"}