CRC Handbook of Enthalpy Data of Polymer-Solvent Systems
The CRC Handbook of Enthalpy Data of Polymer-Solvent Systems presents data that is as essential to the production, process design, and use of polymers as it is to understand the physical behavior and intermolecular interactions in polymer solutions and in developing thermodynamic polymer models.
Providing an all-encompassing collection of current enthalpy data for all types of polymer solutions, this handbook is a ready companion with Christian Wohlfarth's previously published handbooks of thermodynamic data for copolymer solutions, aqueous polymer solutions, and polymer solutions at elevated pressures, which contain only a small amount of enthalpic data in comparison to the data presented here. This volume contains 1770 data sets that include enthalpies of mixing and dilution for the entire concentration range as well as partial enthalpies of mixing and solution at infinite dilution. Special appendices allow scientists to access specific systems and data easily.
The CRC Handbook of Enthalpy Data of Polymer-Solvent Systems is a practical, one-stop resource that allows polymer chemists, biochemists, chemical engineers, materials scientists, and physical chemists involved in both industrial and laboratory processes to quickly retrieve relevant information as needed.
- Handbook of Enthalpy Data of Polymer-Solvent Systems contains 620 data sets on enthalpies of mixing or intermediary enthalpies of dilution, 970 data sets for polymer partial enthalpies of mixing or solution at infinite dilution, and 180 IGC tables
- Presents nearly 800 original literature references, including dissertations, Introduces experimental methods, the interrelationship between thermodynamic quantities, and data reduction.
- Gathers key insights into the physical behavior of polymer solutions, intermolecular interactions, and molecular nature of mixtures.
The CRC Handbook of Enthalpy Data of Polymer-Solvent Systems presents data that is as essential to the production, process design, and use of polymers as it is to understand the physical behavior and intermolecular interactions in polymer solutions and in developing thermodynamic polymer models.
Providing an all-encompassing collection of current enthalpy data for all types of polymer solutions, this handbook is a ready companion with Christian Wohlfarth's previously published handbooks of thermodynamic data for copolymer solutions, aqueous polymer solutions, and polymer solutions at elevated pressures, which contain only a small amount of enthalpic data in comparison to the data presented here. This volume contains 1770 data sets that include enthalpies of mixing and dilution for the entire concentration range as well as partial enthalpies of mixing and solution at infinite dilution. Special appendices allow scientists to access specific systems and data easily.
The CRC Handbook of Enthalpy Data of Polymer-Solvent Systems is a practical, one-stop resource that allows polymer chemists, biochemists, chemical engineers, materials scientists, and physical chemists involved in both industrial and laboratory processes to quickly retrieve relevant information as needed.
INTRODUCTION
Objectives of the handbook
Measurement of enthalpy changes in polymer solutions
Guide to the data tables
List of symbols
References
ENTHALPIES OF MIXING OR INTERMEDIARY ENTHALPIES OF DILUTION
Experimental data
References
POLYMER PARTIAL ENTHALPIES OF MIXING (AT INFINITE DILUTION) OR POLYMER (FIRST) INTEGRAL ENTHALPIES OF SOLUTION
Experimental data
References
SOLVENT PARTIAL ENTHALPIES OF MIXING MEASURED BY CALORIMETRY
Experimental data
References
PARTIAL MOLAR ENTHALPIES OF MIXING AT INFINITE DILUTION OF SOLVENTS AND ENTHALPIES OF SOLUTION OF GASES/VAPORS OF SOLVENTS IN MOLTEN POLYMERS FROM INVERSE GAS-LIQUID CHROMATOGRAPHY (IGC)
Experimental data
References
TABLE OF SYSTEMS FOR ADDITIONAL INFORMATION ON ENTHALPY EFFECTS IN POLYMER SOLUTIONS
List of systems
References
APPENDICES
List of polymers in alphabetical order
List of systems and properties in order of the polymers
List of solvents in alphabetical order
List of solvents in order of their molecular formulas INDEX
Objectives of the handbook
Measurement of enthalpy changes in polymer solutions
Guide to the data tables
List of symbols
References
ENTHALPIES OF MIXING OR INTERMEDIARY ENTHALPIES OF DILUTION
Experimental data
References
POLYMER PARTIAL ENTHALPIES OF MIXING (AT INFINITE DILUTION) OR POLYMER (FIRST) INTEGRAL ENTHALPIES OF SOLUTION
Experimental data
References
SOLVENT PARTIAL ENTHALPIES OF MIXING MEASURED BY CALORIMETRY
Experimental data
References
PARTIAL MOLAR ENTHALPIES OF MIXING AT INFINITE DILUTION OF SOLVENTS AND ENTHALPIES OF SOLUTION OF GASES/VAPORS OF SOLVENTS IN MOLTEN POLYMERS FROM INVERSE GAS-LIQUID CHROMATOGRAPHY (IGC)
Experimental data
References
TABLE OF SYSTEMS FOR ADDITIONAL INFORMATION ON ENTHALPY EFFECTS IN POLYMER SOLUTIONS
List of systems
References
APPENDICES
List of polymers in alphabetical order
List of systems and properties in order of the polymers
List of solvents in alphabetical order
List of solvents in order of their molecular formulas INDEX
Related Products
Cost Management in Pla...
$199.00
{"id":11242204292,"title":"Cost Management in Plastics Processing: Strategies, targets, techniques and tools","handle":"978-1-906479-09-1","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: R. J. Kent \u003cbr\u003eISBN 978-1-906479-09-1 \u003cbr\u003e\u003cbr\u003epages 288\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThird edition of a Plastics Information Direct best-seller.\u003cbr\u003e\u003cbr\u003eCost management has always been a vital topic for plastics processors. This is not the same as cost cutting; cost management is a process of understanding where costs arise and how they can be controlled throughout the manufacturing process, from design to disposal, which will improve both profits and management. Done well it will contribute to world-class performance, in the prevailing financial climate it may be essential for survival.\u003cbr\u003e\u003cbr\u003eIn this book Dr Kent poses some essential questions about the way companies consider, monitor, manage and reduce their costs, such as why there is traditionally so much emphasis on labour costs and so little on overheads. He then offers a clear and well-structured route-map broken down into simple tasks and achievable goals. His advice is relevant to companies using any plastics shaping or finishing processes.\u003cbr\u003e\u003cbr\u003eThis revised and expanded third edition acknowledges the ongoing changes in the business of plastics processing, such as the increasing scrutiny of environmental impacts and the rise in energy costs. As always it is highly readable and thought-provoking, clearly illustrated and designed to deliver real results.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 Cost management\u003cbr\u003e1.1 What do you want to be?\u003cbr\u003e1.2 Structured management\u003cbr\u003e1.3 Structured management - where are you now?\u003cbr\u003e1.4 Financial and management accounting\u003cbr\u003e1.5 Cost structures\u003cbr\u003e1.6 Activity based costing\u003cbr\u003e1.7 Activity based management\u003cbr\u003e1.8 Financial structure - where are you now?\u003cbr\u003e1.9 Product costing - 1\u003cbr\u003e1.10 Product costing - 2\u003cbr\u003e1.11 Old ideas and new ideas\u003cbr\u003e1.12 Investment for cost management\u003cbr\u003e1.13 Successful cost management projects\u003cbr\u003e1.14 Cost management projects - where are you now?\u003cbr\u003e1.15 The cost management process\u003cbr\u003e1.16 The cost management process - where are you now?\u003cbr\u003e1.17 World class principles\u003cbr\u003e1.18 World class principles - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e2 Design and development\u003cbr\u003e2.1 Fundamentals\u003cbr\u003e2.2 Competitors and markets in design\u003cbr\u003e2.3 Competitors and markets - where are you now?\u003cbr\u003e2.4 Total product planning\u003cbr\u003e2.5 Total product planning - where are you now?\u003cbr\u003e2.6 PENTAMODE\u003cbr\u003e2.7 The design and development process\u003cbr\u003e2.8 The product design specification\u003cbr\u003e2.9 Teams and processes - where are you now?\u003cbr\u003e2.10 Design for manufacture and assembly\u003cbr\u003e2.11 Value analysis and engineering\u003cbr\u003e2.12 Design tools - where are you now?\u003cbr\u003e2.13 Sustainable design - resource efficiency\u003cbr\u003e2.14 Sustainable design- manufacture\u003cbr\u003e2.15 Sustainable design - use\u003cbr\u003e2.16 Sustainable design - end-of-life\u003cbr\u003e2.17 Sustainable design - raw materials\u003cbr\u003e2.18 Sustainable design - distribution\u003cbr\u003e2.19 Sustainable design - where are you now?\u003cbr\u003e2.20 RoHS and WEEE\u003cbr\u003eKey tips\u003cbr\u003e3 Materials\u003cbr\u003e3.1 Reducing the raw materials cost\u003cbr\u003e3.2 Purchasing\u003cbr\u003e3.3 Supplier partnerships - where are you now?\u003cbr\u003e3.4 Purchasing - where are you now?\u003cbr\u003e3.5 Materials content cost management\u003cbr\u003e3.6 Materials use cost management\u003cbr\u003e3.7 Materials content and use management - where are you now?\u003cbr\u003e3.8 Inventory management\u003cbr\u003e3.9 Inventory management - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e4 People and systems\u003cbr\u003e4.1 People and systems\u003cbr\u003e4.2 People and systems - where are you now?\u003cbr\u003e4.3 People - recruiting the right people\u003cbr\u003e4.4 People - training and development\u003cbr\u003e4.5 People - upward management\u003cbr\u003e4.6 People - projects\u003cbr\u003e4.7 People - where are you now?\u003cbr\u003e4.8 Systems - quality, environmental, energy and health and safety\u003cbr\u003e4.9 Quality management systems – the rationale of a QMS\u003cbr\u003e4.10 Quality management systems – documenting a QMS\u003cbr\u003e4.11 Quality management systems – operating a QMS\u003cbr\u003e4.12 Quality management - where are you now?\u003cbr\u003e4.13 Environmental management systems\u003cbr\u003e4.14 Environmental management systems - starting out with an EMS\u003cbr\u003e4.15 Environmental management systems - managing interactions\u003cbr\u003e4.16 Environmental management systems - the basic EMS\u003cbr\u003e4.17 Environmental management systems - operating an EMS\u003cbr\u003e4.18 Environmental management systems - where are you now?\u003cbr\u003e4.19 Health and safety management systems\u003cbr\u003e4.20 Health and safety management systems - where are you now?\u003cbr\u003e4.21 Risk assessment - introduction\u003cbr\u003e4.22 Risk assessment - quality\u003cbr\u003e4.23 Risk assessment - environmental\u003cbr\u003e4.24 Risk assessment - health and safety\u003cbr\u003e4.25 Risk assessment - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e5 Production\u003cbr\u003e5.1 The manufacturing strategy\u003cbr\u003e5.2 Production control systems\u003cbr\u003e5.3 MRP\/MRPII\/ERP systems\u003cbr\u003e5.4 JIT systems\u003cbr\u003e5.5 OPT systems\u003cbr\u003e5.6 Production control systems - where are you now?\u003cbr\u003e5.7 Waste and non-value activities\u003cbr\u003e5.8 Work cells\u003cbr\u003e5.9 Machine size\u003cbr\u003e5.10 Tool acceptance and initial machine setting\u003cbr\u003e5.11 Machine operation\u003cbr\u003e5.12 Machine maintenance\u003cbr\u003e5.13 Machine utilisation\u003cbr\u003e5.14 Economic batch quantity and set-up time\u003cbr\u003e5.15 Scheduling and batching\u003cbr\u003e5.16 Manufacturing systems - where are you now?\u003cbr\u003e5.17 Supplier development and integration\u003cbr\u003e5.18 Quality management\u003cbr\u003e5.19 Quality costs \/ quality savings?\u003cbr\u003e5.20 Performance measurement\u003cbr\u003e5.21 Performance measurement - where are you now?\u003cbr\u003e5.22 Culture change and training\u003cbr\u003eKey tips\u003cbr\u003e6 Overheads\u003cbr\u003e6.1 Energy management - the vital questions\u003cbr\u003e6.2 Energy management - more vital questions\u003cbr\u003e6.3 Energy management - internal benchmarking\u003cbr\u003e6.4 Energy management - performance assessment and forecasting\u003cbr\u003e6.5 Energy management - external benchmarking by site\u003cbr\u003e6.6 Energy management - external benchmarking by machine\u003cbr\u003e6.7 Measuring energy costs\u003cbr\u003e6.8 The site energy survey\u003cbr\u003e6.9 Injection moulding\u003cbr\u003e6.10 Injection moulding - all-electric machines\u003cbr\u003e6.11 Extrusion\u003cbr\u003e6.12 Extrusion blow moulding\u003cbr\u003e6.13 Motors\u003cbr\u003e6.14 Compressed air\u003cbr\u003e6.15 Cooling\u003cbr\u003e6.16 Drying\u003cbr\u003e6.17 Buildings\u003cbr\u003e6.18 Energy: general management - where are you now?\u003cbr\u003e6.19 Energy: financial management - where are you now?\u003cbr\u003e6.20 Energy: technical management - where are you now?\u003cbr\u003e6.21 Energy: awareness and information - where are you now?\u003cbr\u003e6.22 Waste minimisation\u003cbr\u003e6.23 The site waste survey\u003cbr\u003e6.24 Assessing waste performance\u003cbr\u003e6.25 Tools for waste minimisation\u003cbr\u003e6.26 Managing waste minimisation\u003cbr\u003e6.27 Waste minimisation - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e7 Tools for cost management\u003cbr\u003e7.1 Cost management tools\u003cbr\u003e7.2 Histograms\u003cbr\u003e7.3 Pareto principle\u003cbr\u003e7.4 Cause and effect diagrams\u003cbr\u003e7.5 Scatter diagrams\u003cbr\u003e7.6 Deviations and CUSUM\u003cbr\u003e7.7 Flow charts\u003cbr\u003e7.8 Process capability studies\u003cbr\u003e7.9 Statistical process control - control charts\u003cbr\u003e7.10 Mind mapping\u003cbr\u003e7.11 Other tools\u003cbr\u003ePostscript\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003eRobin Kent is widely known across the plastics processing industry for his expertise in manufacturing efficiency which he communicates through his books, presentations, training and consultancy. He was awarded a Personal Contribution award in the 2010 Plastics Industry Awards in the UK\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has been involved with plastics processing in a variety of sectors including extrusion and injection moulding for 40 years. He has been technical director of several major European plastics processing companies but also understands the pressures on smaller businesses, having run his own plastics engineering consultancy since 1996.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has published over 400 papers and articles and also written a companion volume: Energy Management in Plastics Processing: Strategies, targets, techniques and tools, published in 2008 by Plastics Information Direct. \u003c\/div\u003e","published_at":"2017-06-22T21:12:50-04:00","created_at":"2017-06-22T21:12:50-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2012","AMI","book","Cost management","extruders","general","global industry","molders","moulders","plastics","plastics factory","processing","waste disposal"],"price":19900,"price_min":19900,"price_max":19900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378318212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Cost Management in Plastics Processing: Strategies, targets, techniques and tools","public_title":null,"options":["Default Title"],"price":19900,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-906479-09-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-09-1.jpg?v=1499211767"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-09-1.jpg?v=1499211767","options":["Title"],"media":[{"alt":null,"id":353966194781,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-09-1.jpg?v=1499211767"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-906479-09-1.jpg?v=1499211767","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: R. J. Kent \u003cbr\u003eISBN 978-1-906479-09-1 \u003cbr\u003e\u003cbr\u003epages 288\n\u003ch5\u003eSummary\u003c\/h5\u003e\nThird edition of a Plastics Information Direct best-seller.\u003cbr\u003e\u003cbr\u003eCost management has always been a vital topic for plastics processors. This is not the same as cost cutting; cost management is a process of understanding where costs arise and how they can be controlled throughout the manufacturing process, from design to disposal, which will improve both profits and management. Done well it will contribute to world-class performance, in the prevailing financial climate it may be essential for survival.\u003cbr\u003e\u003cbr\u003eIn this book Dr Kent poses some essential questions about the way companies consider, monitor, manage and reduce their costs, such as why there is traditionally so much emphasis on labour costs and so little on overheads. He then offers a clear and well-structured route-map broken down into simple tasks and achievable goals. His advice is relevant to companies using any plastics shaping or finishing processes.\u003cbr\u003e\u003cbr\u003eThis revised and expanded third edition acknowledges the ongoing changes in the business of plastics processing, such as the increasing scrutiny of environmental impacts and the rise in energy costs. As always it is highly readable and thought-provoking, clearly illustrated and designed to deliver real results.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 Cost management\u003cbr\u003e1.1 What do you want to be?\u003cbr\u003e1.2 Structured management\u003cbr\u003e1.3 Structured management - where are you now?\u003cbr\u003e1.4 Financial and management accounting\u003cbr\u003e1.5 Cost structures\u003cbr\u003e1.6 Activity based costing\u003cbr\u003e1.7 Activity based management\u003cbr\u003e1.8 Financial structure - where are you now?\u003cbr\u003e1.9 Product costing - 1\u003cbr\u003e1.10 Product costing - 2\u003cbr\u003e1.11 Old ideas and new ideas\u003cbr\u003e1.12 Investment for cost management\u003cbr\u003e1.13 Successful cost management projects\u003cbr\u003e1.14 Cost management projects - where are you now?\u003cbr\u003e1.15 The cost management process\u003cbr\u003e1.16 The cost management process - where are you now?\u003cbr\u003e1.17 World class principles\u003cbr\u003e1.18 World class principles - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e2 Design and development\u003cbr\u003e2.1 Fundamentals\u003cbr\u003e2.2 Competitors and markets in design\u003cbr\u003e2.3 Competitors and markets - where are you now?\u003cbr\u003e2.4 Total product planning\u003cbr\u003e2.5 Total product planning - where are you now?\u003cbr\u003e2.6 PENTAMODE\u003cbr\u003e2.7 The design and development process\u003cbr\u003e2.8 The product design specification\u003cbr\u003e2.9 Teams and processes - where are you now?\u003cbr\u003e2.10 Design for manufacture and assembly\u003cbr\u003e2.11 Value analysis and engineering\u003cbr\u003e2.12 Design tools - where are you now?\u003cbr\u003e2.13 Sustainable design - resource efficiency\u003cbr\u003e2.14 Sustainable design- manufacture\u003cbr\u003e2.15 Sustainable design - use\u003cbr\u003e2.16 Sustainable design - end-of-life\u003cbr\u003e2.17 Sustainable design - raw materials\u003cbr\u003e2.18 Sustainable design - distribution\u003cbr\u003e2.19 Sustainable design - where are you now?\u003cbr\u003e2.20 RoHS and WEEE\u003cbr\u003eKey tips\u003cbr\u003e3 Materials\u003cbr\u003e3.1 Reducing the raw materials cost\u003cbr\u003e3.2 Purchasing\u003cbr\u003e3.3 Supplier partnerships - where are you now?\u003cbr\u003e3.4 Purchasing - where are you now?\u003cbr\u003e3.5 Materials content cost management\u003cbr\u003e3.6 Materials use cost management\u003cbr\u003e3.7 Materials content and use management - where are you now?\u003cbr\u003e3.8 Inventory management\u003cbr\u003e3.9 Inventory management - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e4 People and systems\u003cbr\u003e4.1 People and systems\u003cbr\u003e4.2 People and systems - where are you now?\u003cbr\u003e4.3 People - recruiting the right people\u003cbr\u003e4.4 People - training and development\u003cbr\u003e4.5 People - upward management\u003cbr\u003e4.6 People - projects\u003cbr\u003e4.7 People - where are you now?\u003cbr\u003e4.8 Systems - quality, environmental, energy and health and safety\u003cbr\u003e4.9 Quality management systems – the rationale of a QMS\u003cbr\u003e4.10 Quality management systems – documenting a QMS\u003cbr\u003e4.11 Quality management systems – operating a QMS\u003cbr\u003e4.12 Quality management - where are you now?\u003cbr\u003e4.13 Environmental management systems\u003cbr\u003e4.14 Environmental management systems - starting out with an EMS\u003cbr\u003e4.15 Environmental management systems - managing interactions\u003cbr\u003e4.16 Environmental management systems - the basic EMS\u003cbr\u003e4.17 Environmental management systems - operating an EMS\u003cbr\u003e4.18 Environmental management systems - where are you now?\u003cbr\u003e4.19 Health and safety management systems\u003cbr\u003e4.20 Health and safety management systems - where are you now?\u003cbr\u003e4.21 Risk assessment - introduction\u003cbr\u003e4.22 Risk assessment - quality\u003cbr\u003e4.23 Risk assessment - environmental\u003cbr\u003e4.24 Risk assessment - health and safety\u003cbr\u003e4.25 Risk assessment - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e5 Production\u003cbr\u003e5.1 The manufacturing strategy\u003cbr\u003e5.2 Production control systems\u003cbr\u003e5.3 MRP\/MRPII\/ERP systems\u003cbr\u003e5.4 JIT systems\u003cbr\u003e5.5 OPT systems\u003cbr\u003e5.6 Production control systems - where are you now?\u003cbr\u003e5.7 Waste and non-value activities\u003cbr\u003e5.8 Work cells\u003cbr\u003e5.9 Machine size\u003cbr\u003e5.10 Tool acceptance and initial machine setting\u003cbr\u003e5.11 Machine operation\u003cbr\u003e5.12 Machine maintenance\u003cbr\u003e5.13 Machine utilisation\u003cbr\u003e5.14 Economic batch quantity and set-up time\u003cbr\u003e5.15 Scheduling and batching\u003cbr\u003e5.16 Manufacturing systems - where are you now?\u003cbr\u003e5.17 Supplier development and integration\u003cbr\u003e5.18 Quality management\u003cbr\u003e5.19 Quality costs \/ quality savings?\u003cbr\u003e5.20 Performance measurement\u003cbr\u003e5.21 Performance measurement - where are you now?\u003cbr\u003e5.22 Culture change and training\u003cbr\u003eKey tips\u003cbr\u003e6 Overheads\u003cbr\u003e6.1 Energy management - the vital questions\u003cbr\u003e6.2 Energy management - more vital questions\u003cbr\u003e6.3 Energy management - internal benchmarking\u003cbr\u003e6.4 Energy management - performance assessment and forecasting\u003cbr\u003e6.5 Energy management - external benchmarking by site\u003cbr\u003e6.6 Energy management - external benchmarking by machine\u003cbr\u003e6.7 Measuring energy costs\u003cbr\u003e6.8 The site energy survey\u003cbr\u003e6.9 Injection moulding\u003cbr\u003e6.10 Injection moulding - all-electric machines\u003cbr\u003e6.11 Extrusion\u003cbr\u003e6.12 Extrusion blow moulding\u003cbr\u003e6.13 Motors\u003cbr\u003e6.14 Compressed air\u003cbr\u003e6.15 Cooling\u003cbr\u003e6.16 Drying\u003cbr\u003e6.17 Buildings\u003cbr\u003e6.18 Energy: general management - where are you now?\u003cbr\u003e6.19 Energy: financial management - where are you now?\u003cbr\u003e6.20 Energy: technical management - where are you now?\u003cbr\u003e6.21 Energy: awareness and information - where are you now?\u003cbr\u003e6.22 Waste minimisation\u003cbr\u003e6.23 The site waste survey\u003cbr\u003e6.24 Assessing waste performance\u003cbr\u003e6.25 Tools for waste minimisation\u003cbr\u003e6.26 Managing waste minimisation\u003cbr\u003e6.27 Waste minimisation - where are you now?\u003cbr\u003eKey tips\u003cbr\u003e7 Tools for cost management\u003cbr\u003e7.1 Cost management tools\u003cbr\u003e7.2 Histograms\u003cbr\u003e7.3 Pareto principle\u003cbr\u003e7.4 Cause and effect diagrams\u003cbr\u003e7.5 Scatter diagrams\u003cbr\u003e7.6 Deviations and CUSUM\u003cbr\u003e7.7 Flow charts\u003cbr\u003e7.8 Process capability studies\u003cbr\u003e7.9 Statistical process control - control charts\u003cbr\u003e7.10 Mind mapping\u003cbr\u003e7.11 Other tools\u003cbr\u003ePostscript\n\u003ch5\u003eAbout Author\u003c\/h5\u003e\n\u003cdiv\u003eRobin Kent is widely known across the plastics processing industry for his expertise in manufacturing efficiency which he communicates through his books, presentations, training and consultancy. He was awarded a Personal Contribution award in the 2010 Plastics Industry Awards in the UK\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has been involved with plastics processing in a variety of sectors including extrusion and injection moulding for 40 years. He has been technical director of several major European plastics processing companies but also understands the pressures on smaller businesses, having run his own plastics engineering consultancy since 1996.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eHe has published over 400 papers and articles and also written a companion volume: Energy Management in Plastics Processing: Strategies, targets, techniques and tools, published in 2008 by Plastics Information Direct. \u003c\/div\u003e"}
Databook of Solvents
$285.00
{"id":11242240452,"title":"Databook of Solvents","handle":"978-1-895198-80-5","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Anna \u0026amp; George Wypych \u003cbr\u003eISBN 978-1-895198-80-5 \u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cbr\u003ePublished: 2014\u003c\/span\u003e\u003cbr\u003ePages: 742\n\u003ch5\u003eSummary\u003c\/h5\u003e\nSolvents comprise a large group of commercial products of different purities determined by their application (e.g., chemical reagents, pharmaceutical solvents, cleaning liquids, etc.). Their properties are very important for application of solvents and needed to understand behavior of solvent mixtures. \u003cbr\u003e\u003cbr\u003eThis book contains large set of data on the most important solvents used in everyday industrial practice. The Databook of Solvents provides information divided into five sections: General, Physical, Health, Environmental, and Use. \u003cbr\u003e\u003cbr\u003eIn the General section the following data are displayed: Name, CAS number, Acronym, Chemical category, Empirical formula, IUPAC name, Mixture, Moisture contents, Molecular weight, Properties, Product contents, EC number, RTECS number, and Synonyms 1, 2, 3.\u003cbr\u003ePhysical section contains data on Name, CAS number, Dielectric constant, Acceptor number, Acid dissociation constant, Aniline point, Antoine temperature range, Antoine constants A, B, and C, Boiling temperature, Coefficient of thermal expansion, Color, Corrosivity, Donor number, Electrical conductivity, Evaporation rates with butyl acetate=1 and ether=1, Freezing temperature, Hansen solubility parameters dD, dP, and dH, Molar volume, Heat of combustion, Enthalpy of vaporization, Enthalpy of vaporization temperature, Henry's law constant, Hildebrand solubility parameter, Kauri butanol number, Odor, Odor threshold, pH, Polarity parameter, ET(30), Refractive index, Solubility in water, Specific gravity, Specific gravity temperature, Specific heat, State, Surface tension, Thermal conductivity, Vapor density, Vapor pressure, Vapor pressure temperature, Viscosity, and Viscosity temperature.\u003cbr\u003e\u003cbr\u003eHealth section contains data on Name, CAS number, Autoignition temperature, Carcinogenicity: IRAC, NTP, OSHA, Mutagenic properties, Reproduction\/developmental toxicity, DOT class, TDG class, ICAO\/IATA class, packaging group, IMDG class, packaging group, UN\/NA hazard class, UN packaging group, Proper shipping name, Explosion limits: lower and upper, Flash point, Flash point method, LD50 dermal (rabbit), LC50 inhalation (rat), LD50 oral (mouse), LD50 oral (rat), Maximum concentration during 30 min exposure (NIOSH-IDLH), Maximum concentration at any time: ACGIH, NIOSH, OSHA, Maximum concentration during continuous exposure for 15 min: ACGIH, NIOSH, OSHA, NFPA flammability, health, reactivity, HMIS flammability, health, reactivity, Route of entry, Ingestion, Skin irritation, Eye irritation, Inhalation, First aid: eyes, skin, inhalation, Chronic effects, Target organs, Threshold limiting value: ACGIH, NIOSH, OSHA, UN number, UN risk phrases, and UN safety phrases. \u003cbr\u003e\u003cbr\u003eEnvironmental section contains data on Name, CAS number, Aquatic toxicity, Bluegill sunfish (96-h LC50), Daphnia magna (96-h LC50) and (48-h LC50), Fathead minnow (96-h LC50), Rainbow trout (96-h LC50), Bioconcentration factor, Biodegradation probability, Biological oxygen demand (20-day test) and (5-day test), Chemical oxygen demand, Atmospheric half-life, Hydroxyl rate constant, Global warming potential, Montreal protocol, Partition coefficient, Ozone depletion potential (CFC11=1), Ozone rate constant, Soil absorption constant, Theoretical oxygen demand, Urban ozone formation potential (C2H4=1), UV absorption.\u003cbr\u003e\u003cbr\u003eUse section contains information on Name, CAS number, Manufacturer, Outstanding properties, Potential substitutes, Recommended for polymers, Features \u0026amp; benefits, Processing methods, Recommended dosage, and Recommended for products.\u003cbr\u003eMore than 250 of the most essential solvents are included in the publication. The table of contents gives more information on solvent groups included in the Databook of Solvents. \u003cbr\u003eReaders interested in this subject should note that two volumes of fundamental treatment of all essential areas of solvents’ use have also been just published. They include: Handbook of Solvents. Volume 1. Properties and Handbook of Solvents. Volume 2. Use, Health, and Environment. Together these four books provide the most comprehensive information on the subject ever published. The books are the authoritative source of knowledge, considering that very well-known experts in the fields of solvent use were involved in creation of these extensive publications.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION\u003cbr\u003e2 INFORMATION ON THE DATA FIELDS\u003cbr\u003e3 SOLVENTS\u003cbr\u003e3.1 Acids\u003cbr\u003e3.2 Alcohols\u003cbr\u003e3.3 Aldehydes\u003cbr\u003e3.4 Aliphatic hydrocarbons\u003cbr\u003e3.5 Amides\u003cbr\u003e3.6 Amines\u003cbr\u003e3.7 Aromatic hydrocarbons\u003cbr\u003e3.8 Chlorofluorocarbons \u003cbr\u003e3.9 Esters\u003cbr\u003e3.10 Ethers\u003cbr\u003e3.11 Glycol ethers\u003cbr\u003e3.12 Halogenated\u003cbr\u003e3.13 Heterocyclic\u003cbr\u003e3.14 Hydrochlorofluorocarbons\u003cbr\u003e3.15 Ketones\u003cbr\u003e3.16 Nitriles\u003cbr\u003e3.17 Perfluorocarbons\u003cbr\u003e3.18 Polyhydric alcohols\u003cbr\u003e3.19 Sulfoxides\u003cbr\u003e3.20 Supercritical fluids\u003cbr\u003e3.21 Terpenes\u003cbr\u003e3.22 Thiol derivatives","published_at":"2017-06-22T21:14:44-04:00","created_at":"2017-06-22T21:14:44-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2014","environment","environmental impact","features and benefits","general","health and safety data","p-additives","physical properties","potential substitutes","solvents","use"],"price":28500,"price_min":28500,"price_max":28500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":43378433860,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Databook of Solvents","public_title":null,"options":["Default Title"],"price":28500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-895198-80-5","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-80-5.jpg?v=1499212946"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-80-5.jpg?v=1499212946","options":["Title"],"media":[{"alt":null,"id":353970061405,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-80-5.jpg?v=1499212946"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-895198-80-5.jpg?v=1499212946","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\nAuthor: Anna \u0026amp; George Wypych \u003cbr\u003eISBN 978-1-895198-80-5 \u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cbr\u003ePublished: 2014\u003c\/span\u003e\u003cbr\u003ePages: 742\n\u003ch5\u003eSummary\u003c\/h5\u003e\nSolvents comprise a large group of commercial products of different purities determined by their application (e.g., chemical reagents, pharmaceutical solvents, cleaning liquids, etc.). Their properties are very important for application of solvents and needed to understand behavior of solvent mixtures. \u003cbr\u003e\u003cbr\u003eThis book contains large set of data on the most important solvents used in everyday industrial practice. The Databook of Solvents provides information divided into five sections: General, Physical, Health, Environmental, and Use. \u003cbr\u003e\u003cbr\u003eIn the General section the following data are displayed: Name, CAS number, Acronym, Chemical category, Empirical formula, IUPAC name, Mixture, Moisture contents, Molecular weight, Properties, Product contents, EC number, RTECS number, and Synonyms 1, 2, 3.\u003cbr\u003ePhysical section contains data on Name, CAS number, Dielectric constant, Acceptor number, Acid dissociation constant, Aniline point, Antoine temperature range, Antoine constants A, B, and C, Boiling temperature, Coefficient of thermal expansion, Color, Corrosivity, Donor number, Electrical conductivity, Evaporation rates with butyl acetate=1 and ether=1, Freezing temperature, Hansen solubility parameters dD, dP, and dH, Molar volume, Heat of combustion, Enthalpy of vaporization, Enthalpy of vaporization temperature, Henry's law constant, Hildebrand solubility parameter, Kauri butanol number, Odor, Odor threshold, pH, Polarity parameter, ET(30), Refractive index, Solubility in water, Specific gravity, Specific gravity temperature, Specific heat, State, Surface tension, Thermal conductivity, Vapor density, Vapor pressure, Vapor pressure temperature, Viscosity, and Viscosity temperature.\u003cbr\u003e\u003cbr\u003eHealth section contains data on Name, CAS number, Autoignition temperature, Carcinogenicity: IRAC, NTP, OSHA, Mutagenic properties, Reproduction\/developmental toxicity, DOT class, TDG class, ICAO\/IATA class, packaging group, IMDG class, packaging group, UN\/NA hazard class, UN packaging group, Proper shipping name, Explosion limits: lower and upper, Flash point, Flash point method, LD50 dermal (rabbit), LC50 inhalation (rat), LD50 oral (mouse), LD50 oral (rat), Maximum concentration during 30 min exposure (NIOSH-IDLH), Maximum concentration at any time: ACGIH, NIOSH, OSHA, Maximum concentration during continuous exposure for 15 min: ACGIH, NIOSH, OSHA, NFPA flammability, health, reactivity, HMIS flammability, health, reactivity, Route of entry, Ingestion, Skin irritation, Eye irritation, Inhalation, First aid: eyes, skin, inhalation, Chronic effects, Target organs, Threshold limiting value: ACGIH, NIOSH, OSHA, UN number, UN risk phrases, and UN safety phrases. \u003cbr\u003e\u003cbr\u003eEnvironmental section contains data on Name, CAS number, Aquatic toxicity, Bluegill sunfish (96-h LC50), Daphnia magna (96-h LC50) and (48-h LC50), Fathead minnow (96-h LC50), Rainbow trout (96-h LC50), Bioconcentration factor, Biodegradation probability, Biological oxygen demand (20-day test) and (5-day test), Chemical oxygen demand, Atmospheric half-life, Hydroxyl rate constant, Global warming potential, Montreal protocol, Partition coefficient, Ozone depletion potential (CFC11=1), Ozone rate constant, Soil absorption constant, Theoretical oxygen demand, Urban ozone formation potential (C2H4=1), UV absorption.\u003cbr\u003e\u003cbr\u003eUse section contains information on Name, CAS number, Manufacturer, Outstanding properties, Potential substitutes, Recommended for polymers, Features \u0026amp; benefits, Processing methods, Recommended dosage, and Recommended for products.\u003cbr\u003eMore than 250 of the most essential solvents are included in the publication. The table of contents gives more information on solvent groups included in the Databook of Solvents. \u003cbr\u003eReaders interested in this subject should note that two volumes of fundamental treatment of all essential areas of solvents’ use have also been just published. They include: Handbook of Solvents. Volume 1. Properties and Handbook of Solvents. Volume 2. Use, Health, and Environment. Together these four books provide the most comprehensive information on the subject ever published. The books are the authoritative source of knowledge, considering that very well-known experts in the fields of solvent use were involved in creation of these extensive publications.\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION\u003cbr\u003e2 INFORMATION ON THE DATA FIELDS\u003cbr\u003e3 SOLVENTS\u003cbr\u003e3.1 Acids\u003cbr\u003e3.2 Alcohols\u003cbr\u003e3.3 Aldehydes\u003cbr\u003e3.4 Aliphatic hydrocarbons\u003cbr\u003e3.5 Amides\u003cbr\u003e3.6 Amines\u003cbr\u003e3.7 Aromatic hydrocarbons\u003cbr\u003e3.8 Chlorofluorocarbons \u003cbr\u003e3.9 Esters\u003cbr\u003e3.10 Ethers\u003cbr\u003e3.11 Glycol ethers\u003cbr\u003e3.12 Halogenated\u003cbr\u003e3.13 Heterocyclic\u003cbr\u003e3.14 Hydrochlorofluorocarbons\u003cbr\u003e3.15 Ketones\u003cbr\u003e3.16 Nitriles\u003cbr\u003e3.17 Perfluorocarbons\u003cbr\u003e3.18 Polyhydric alcohols\u003cbr\u003e3.19 Sulfoxides\u003cbr\u003e3.20 Supercritical fluids\u003cbr\u003e3.21 Terpenes\u003cbr\u003e3.22 Thiol derivatives"}
Databook of Solvents -...
$295.00
{"id":2059055333469,"title":"Databook of Solvents - 2nd edition","handle":"databook-of-solvents-2nd-edition","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: Anna \u0026amp; George Wypych \u003cbr\u003eISBN 978-1-927885-45-1\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003ePublication date: January 2019\u003cbr\u003eNumber of pages: 798+x\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe second edition of this book was redesigned to include all high production volume solvents. The high production volume solvents are produced or imported at levels greater than 1,000 tones per year in at least one member country. The most recent list of these chemicals has been compiled based on submissions from eight member countries (including the USA) in addition to the European Union’s HPV list according to EC Regulation 793\/93. It has been used by the member countries to choose chemicals on which to make a hazard assessment for human health and the environment.\u003c\/p\u003e\n\u003cp\u003eThis selection of data is important considering that it is expected that the total amount of solvents to be used in 2020 in the USA alone will be 4.3 million tons. Still, an unknown but considered a large fraction of these massive amounts of solvents ends up polluting the air, water, and soil. It is hoped that this the most extensive and up-to-date information on these solvents (sometimes containing suggestions on safer replacements if they were readily available) will help in a more rational, effective, and safe use of the solvents.\u003c\/p\u003e\n\u003cp\u003eThis book is the reference source containing a large number of data on the most important solvents used in industry. Solvents comprise a large group of commercial products of different purities determined by their application (e.g., chemical reagents, pharmaceutical solvents, cleaning liquids, etc.). Their properties are very important for selection of solvents for the application. They are also needed to understand the behavior of solvent mixtures.\u003c\/p\u003e\n\u003cp\u003eThis book contains a large set of data on the most important solvents used in everyday industrial practice. The \u003cstrong\u003eDatabook of Solvents\u003c\/strong\u003e provides information divided into five sections: General, Physical, Health, Environmental, and Use.\u003c\/p\u003e\n\u003cp\u003eIn the \u003cstrong\u003eGeneral s\u003c\/strong\u003eection the following data are displayed: Name, CAS number, Acronym, Chemical category, Empirical formula, IUPAC name, Mixture, Moisture contents, Molecular weight, Properties, Product contents, EC number, RTECS number, and Synonyms 1, 2, 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e section contains data on Name, CAS number, Dielectric constant, Acceptor number, Acid dissociation constant, Aniline point, Antoine temperature range, Antoine constants A, B, and C, Boiling temperature, Coefficient of thermal expansion, Color, Corrosivity, Donor number, Electrical conductivity, Evaporation rates with butyl acetate=1 and ether=1, Freezing temperature, Hansen solubility parameters dD, dP, and dH, Molar volume, Heat of combustion, Enthalpy of vaporization, Enthalpy of vaporization temperature, Henry's law constant, Hildebrand solubility parameter, Kauri butanol number, Odor, Odor threshold, pH, Polarity parameter, ET(30), Refractive index, Solubility in water, Specific gravity, Specific gravity temperature, Specific heat, State, Surface tension, Thermal conductivity, Vapor density, Vapor pressure, Vapor pressure temperature, Viscosity, and Viscosity temperature.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eHealth \u003c\/strong\u003esection contains data on Name, CAS number, Autoignition temperature, Carcinogenicity: IRAC, NTP, OSHA, Mutagenic properties, Reproduction\/developmental toxicity, DOT class, TDG class, ICAO\/IATA class, packaging group, IMDG class, packaging group, UN\/NA hazard class, UN packaging group, Proper shipping name, Explosion limits: lower and upper, Flash point, Flash point method, LD50 dermal (rabbit), LC50 inhalation (rat), LD50 oral (mouse), LD50 oral (rat), Maximum concentration during 30 min exposure (NIOSH-IDLH), Maximum concentration at any time: ACGIH, NIOSH, OSHA, Maximum concentration during continuous exposure for 15 min: ACGIH, NIOSH, OSHA, NFPA flammability, health, reactivity, HMIS flammability, health, reactivity, Route of entry, Ingestion, Skin irritation, Eye irritation, Inhalation, First aid: eyes, skin, inhalation, Chronic effects, Target organs, Threshold limiting value: ACGIH, NIOSH, OSHA, UN number, UN risk phrases, and UN safety phrases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e section contains data on Name, CAS number, Aquatic toxicity, Bluegill sunfish (96-h LC50), Daphnia magna (96-h LC50) and (48-h LC50), Fathead minnow (96-h LC50), Rainbow trout (96-h LC50), Bioconcentration factor, Biodegradation probability, Biological oxygen demand (20-day test) and (5-day test), Chemical oxygen demand, Atmospheric half-life, Hydroxyl rate constant, Global warming potential, Montreal protocol, Partition coefficient, Ozone depletion potential (CFC11=1), Ozone rate constant, Soil absorption constant, Theoretical oxygen demand, Urban ozone formation potential (C2H4=1), UV absorption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse\u003c\/strong\u003e section contains information on Name, CAS number, Manufacturer, Outstanding properties, Potential substitutes, Recommended for polymers, Features \u0026amp; benefits, Processing methods, Recommended dosage, and Recommended for products.\u003c\/p\u003e\n\u003cp\u003eMore than 280 of these essential solvents are included in the publication. The table of contents gives more information on solvent groups included in the \u003cstrong\u003eDatabook of Solvents\u003c\/strong\u003e. Further information which may help in replacement of these solvents can be found in a separate publication entitled \u003cstrong\u003eDatabook of Green Solvents\u003c\/strong\u003e which is published in the most current revised version.\u003c\/p\u003e\n\u003cp\u003eReaders interested in this subject should note that two volumes of fundamental treatment of all essential areas of solvents’ use have also been just published. They include \u003cstrong\u003eHandbook of Solvents. Volume 1. Properties \u003c\/strong\u003eand\u003cstrong\u003e Handbook of Solvents\u003c\/strong\u003e. \u003cstrong\u003eVolume 2. Use, Health, and Environment\u003c\/strong\u003e. Together these four books provide the most comprehensive information on the subject of solvents ever published. The books are the authoritative source of knowledge, considering that experts in the fields of solvent use were involved in the creation of these extensive publications. One of the essential aims of these books is to keep them updated with the most up-to-date findings, data, and commercial developments.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION\u003cbr\u003e2 INFORMATION ON THE DATA FIELDS\u003cbr\u003e3 SOLVENTS\u003cbr\u003e3.1 Acids\u003cbr\u003e3.2 Alcohols\u003cbr\u003e3.3 Aldehydes\u003cbr\u003e3.4 Aliphatic hydrocarbons\u003cbr\u003e3.5 Amides\u003cbr\u003e3.6 Amines\u003cbr\u003e3.7 Aromatic hydrocarbons\u003cbr\u003e3.8 Chlorofluorocarbons \u003cbr\u003e3.9 Esters\u003cbr\u003e3.10 Ethers\u003cbr\u003e3.11 Glycol ethers\u003cbr\u003e3.12 Halogenated\u003cbr\u003e3.13 Heterocyclic\u003cbr\u003e3.14 Hydrochlorofluorocarbons\u003cbr\u003e3.15 Ketones\u003cbr\u003e3.16 Nitriles\u003cbr\u003e3.17 Perfluorocarbons\u003cbr\u003e3.18 Polyhydric alcohols\u003cbr\u003e3.19 Sulfoxides\u003cbr\u003e3.20 Supercritical fluids\u003cbr\u003e3.21 Terpenes\u003cbr\u003e3.22 Thiol derivatives","published_at":"2019-03-18T14:30:00-04:00","created_at":"2019-03-18T14:15:43-04:00","vendor":"Chemtec Publishing","type":"Book","tags":["2019","environment","environmental impact","features and benefits","general","health and safety data","p-additives","physical properties","potential substitutes","solvents","use"],"price":29500,"price_min":29500,"price_max":29500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20181786296413,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Databook of Solvents - 2nd edition","public_title":null,"options":["Default Title"],"price":29500,"weight":1000,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"continue","barcode":"978-1-927885-45-1","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-45-1.jpg?v=1552933325"],"featured_image":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-45-1.jpg?v=1552933325","options":["Title"],"media":[{"alt":null,"id":1423137112157,"position":1,"preview_image":{"aspect_ratio":0.767,"height":450,"width":345,"src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-45-1.jpg?v=1552933325"},"aspect_ratio":0.767,"height":450,"media_type":"image","src":"\/\/chemtec.org\/cdn\/shop\/products\/978-1-927885-45-1.jpg?v=1552933325","width":345}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eAuthor: Anna \u0026amp; George Wypych \u003cbr\u003eISBN 978-1-927885-45-1\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003ePublication date: January 2019\u003cbr\u003eNumber of pages: 798+x\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch5\u003eSummary\u003c\/h5\u003e\n\u003cp\u003eThe second edition of this book was redesigned to include all high production volume solvents. The high production volume solvents are produced or imported at levels greater than 1,000 tones per year in at least one member country. The most recent list of these chemicals has been compiled based on submissions from eight member countries (including the USA) in addition to the European Union’s HPV list according to EC Regulation 793\/93. It has been used by the member countries to choose chemicals on which to make a hazard assessment for human health and the environment.\u003c\/p\u003e\n\u003cp\u003eThis selection of data is important considering that it is expected that the total amount of solvents to be used in 2020 in the USA alone will be 4.3 million tons. Still, an unknown but considered a large fraction of these massive amounts of solvents ends up polluting the air, water, and soil. It is hoped that this the most extensive and up-to-date information on these solvents (sometimes containing suggestions on safer replacements if they were readily available) will help in a more rational, effective, and safe use of the solvents.\u003c\/p\u003e\n\u003cp\u003eThis book is the reference source containing a large number of data on the most important solvents used in industry. Solvents comprise a large group of commercial products of different purities determined by their application (e.g., chemical reagents, pharmaceutical solvents, cleaning liquids, etc.). Their properties are very important for selection of solvents for the application. They are also needed to understand the behavior of solvent mixtures.\u003c\/p\u003e\n\u003cp\u003eThis book contains a large set of data on the most important solvents used in everyday industrial practice. The \u003cstrong\u003eDatabook of Solvents\u003c\/strong\u003e provides information divided into five sections: General, Physical, Health, Environmental, and Use.\u003c\/p\u003e\n\u003cp\u003eIn the \u003cstrong\u003eGeneral s\u003c\/strong\u003eection the following data are displayed: Name, CAS number, Acronym, Chemical category, Empirical formula, IUPAC name, Mixture, Moisture contents, Molecular weight, Properties, Product contents, EC number, RTECS number, and Synonyms 1, 2, 3.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhysical\u003c\/strong\u003e section contains data on Name, CAS number, Dielectric constant, Acceptor number, Acid dissociation constant, Aniline point, Antoine temperature range, Antoine constants A, B, and C, Boiling temperature, Coefficient of thermal expansion, Color, Corrosivity, Donor number, Electrical conductivity, Evaporation rates with butyl acetate=1 and ether=1, Freezing temperature, Hansen solubility parameters dD, dP, and dH, Molar volume, Heat of combustion, Enthalpy of vaporization, Enthalpy of vaporization temperature, Henry's law constant, Hildebrand solubility parameter, Kauri butanol number, Odor, Odor threshold, pH, Polarity parameter, ET(30), Refractive index, Solubility in water, Specific gravity, Specific gravity temperature, Specific heat, State, Surface tension, Thermal conductivity, Vapor density, Vapor pressure, Vapor pressure temperature, Viscosity, and Viscosity temperature.\u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eHealth \u003c\/strong\u003esection contains data on Name, CAS number, Autoignition temperature, Carcinogenicity: IRAC, NTP, OSHA, Mutagenic properties, Reproduction\/developmental toxicity, DOT class, TDG class, ICAO\/IATA class, packaging group, IMDG class, packaging group, UN\/NA hazard class, UN packaging group, Proper shipping name, Explosion limits: lower and upper, Flash point, Flash point method, LD50 dermal (rabbit), LC50 inhalation (rat), LD50 oral (mouse), LD50 oral (rat), Maximum concentration during 30 min exposure (NIOSH-IDLH), Maximum concentration at any time: ACGIH, NIOSH, OSHA, Maximum concentration during continuous exposure for 15 min: ACGIH, NIOSH, OSHA, NFPA flammability, health, reactivity, HMIS flammability, health, reactivity, Route of entry, Ingestion, Skin irritation, Eye irritation, Inhalation, First aid: eyes, skin, inhalation, Chronic effects, Target organs, Threshold limiting value: ACGIH, NIOSH, OSHA, UN number, UN risk phrases, and UN safety phrases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental\u003c\/strong\u003e section contains data on Name, CAS number, Aquatic toxicity, Bluegill sunfish (96-h LC50), Daphnia magna (96-h LC50) and (48-h LC50), Fathead minnow (96-h LC50), Rainbow trout (96-h LC50), Bioconcentration factor, Biodegradation probability, Biological oxygen demand (20-day test) and (5-day test), Chemical oxygen demand, Atmospheric half-life, Hydroxyl rate constant, Global warming potential, Montreal protocol, Partition coefficient, Ozone depletion potential (CFC11=1), Ozone rate constant, Soil absorption constant, Theoretical oxygen demand, Urban ozone formation potential (C2H4=1), UV absorption.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse\u003c\/strong\u003e section contains information on Name, CAS number, Manufacturer, Outstanding properties, Potential substitutes, Recommended for polymers, Features \u0026amp; benefits, Processing methods, Recommended dosage, and Recommended for products.\u003c\/p\u003e\n\u003cp\u003eMore than 280 of these essential solvents are included in the publication. The table of contents gives more information on solvent groups included in the \u003cstrong\u003eDatabook of Solvents\u003c\/strong\u003e. Further information which may help in replacement of these solvents can be found in a separate publication entitled \u003cstrong\u003eDatabook of Green Solvents\u003c\/strong\u003e which is published in the most current revised version.\u003c\/p\u003e\n\u003cp\u003eReaders interested in this subject should note that two volumes of fundamental treatment of all essential areas of solvents’ use have also been just published. They include \u003cstrong\u003eHandbook of Solvents. Volume 1. Properties \u003c\/strong\u003eand\u003cstrong\u003e Handbook of Solvents\u003c\/strong\u003e. \u003cstrong\u003eVolume 2. Use, Health, and Environment\u003c\/strong\u003e. Together these four books provide the most comprehensive information on the subject of solvents ever published. The books are the authoritative source of knowledge, considering that experts in the fields of solvent use were involved in the creation of these extensive publications. One of the essential aims of these books is to keep them updated with the most up-to-date findings, data, and commercial developments.\u003c\/p\u003e\n\u003ch5\u003eTable of Contents\u003c\/h5\u003e\n1 INTRODUCTION\u003cbr\u003e2 INFORMATION ON THE DATA FIELDS\u003cbr\u003e3 SOLVENTS\u003cbr\u003e3.1 Acids\u003cbr\u003e3.2 Alcohols\u003cbr\u003e3.3 Aldehydes\u003cbr\u003e3.4 Aliphatic hydrocarbons\u003cbr\u003e3.5 Amides\u003cbr\u003e3.6 Amines\u003cbr\u003e3.7 Aromatic hydrocarbons\u003cbr\u003e3.8 Chlorofluorocarbons \u003cbr\u003e3.9 Esters\u003cbr\u003e3.10 Ethers\u003cbr\u003e3.11 Glycol ethers\u003cbr\u003e3.12 Halogenated\u003cbr\u003e3.13 Heterocyclic\u003cbr\u003e3.14 Hydrochlorofluorocarbons\u003cbr\u003e3.15 Ketones\u003cbr\u003e3.16 Nitriles\u003cbr\u003e3.17 Perfluorocarbons\u003cbr\u003e3.18 Polyhydric alcohols\u003cbr\u003e3.19 Sulfoxides\u003cbr\u003e3.20 Supercritical fluids\u003cbr\u003e3.21 Terpenes\u003cbr\u003e3.22 Thiol derivatives"}